Glenn Ruben Bakke
|
3286d81a48
|
nrf5/boards: Updating feather52 mpconfigboard.h to use correct uart pins, flow control disabled. Also adjusting leds down to two leds.
|
2017-04-26 00:15:14 +02:00 |
|
Glenn Ruben Bakke
|
5f4798b0f2
|
nrf5/boards: Updating path to custom linker script for feather52 board.
|
2017-04-25 21:55:50 +02:00 |
|
Glenn Ruben Bakke
|
50bb18015a
|
nrf5/boards: Renaming bluefruit_nrf52_feather to feather52 to shorten down the name quite drastically.
|
2017-04-25 21:54:35 +02:00 |
|
Glenn Ruben Bakke
|
6f6c5d30e8
|
nrf5/boards: Updating path to custom bluefruit feather linker script after renaming board folder.
|
2017-04-25 21:51:10 +02:00 |
|
Glenn Ruben Bakke
|
4ae600be8a
|
nrf5/boards: Renaming bluefruit_feather to bluefruit_nrf52_feather as it also exist a m0 variant of the board name.
|
2017-04-25 21:49:17 +02:00 |
|
Glenn Ruben Bakke
|
8aa6e0388e
|
nrf5/boards: Updating mpconfigboard.h for bluefruit nrf52 feather with correct board, mcu and platform name.
|
2017-04-25 21:48:01 +02:00 |
|
Glenn Ruben Bakke
|
195c492419
|
nrf5/boards: Updating adafruit bluefruit nrf52 feather linker script to use 0x1c000 application offset.
|
2017-04-25 21:44:01 +02:00 |
|
Glenn Ruben Bakke
|
8429d022e1
|
nrf5/boards: Renaming custom linker script for bluefruit feather to reflect that the purpose of the custom linker script is DFU. The script is diverging from the generic s132 v2 linker script in the offset of the application.
|
2017-04-25 08:53:52 +02:00 |
|
Glenn Ruben Bakke
|
7043680f1f
|
nrf5/boards: Adding custom linker script for adafruit nrf52 bluefruit feather to be able to detect application upper boundry in flash. Pointing s132 mk file to use this new custom linker script instead of the generic s132 v2 linker script.
|
2017-04-25 08:49:18 +02:00 |
|
Glenn Ruben Bakke
|
ec6502c1ea
|
nrf5/boards: Adding linker script for nrf52832 s132 v.2.0.1.
|
2017-04-24 23:29:05 +02:00 |
|
Glenn Ruben Bakke
|
0ba9c62940
|
nrf5/boards: Adding template board makefiles and configs for bluefruit nrf52 feather. Copied from pca10040 target board. Linker script reference updated to use s132 v2.0.1. Non-BLE enable build disabled for now. Board configuration for leds, uart etc has not been updated yet from pca10040 layout.
|
2017-04-24 23:25:25 +02:00 |
|
Glenn Ruben Bakke
|
44fc96c8a9
|
nrf5/bluetooth: Correcting typo in test where s132 API version is settled.
|
2017-04-24 23:14:04 +02:00 |
|
Glenn Ruben Bakke
|
f68fb8499d
|
nrf5/bluetooth: Updating bluetooth le driver to compile with s132 v.2.0.1 stack.
|
2017-04-24 23:05:08 +02:00 |
|
Glenn Ruben Bakke
|
2adad5f2a6
|
nrf5/bluetooth: Add new compiler flag to signal API variants of the s132 bluetooth le stack. The version is derived from the major number of the stack name.
|
2017-04-24 23:03:54 +02:00 |
|
Glenn Ruben Bakke
|
9abd38a3f2
|
nrf5/bluetooth: Remove hardcoded softdevice version as this now comes as parameter from board makefile.
|
2017-04-24 22:29:48 +02:00 |
|
Glenn Ruben Bakke
|
3c8323aff4
|
nrf5/boards: Updating makefiles using bluetooth stack to use updated linker script file names.
|
2017-04-24 22:28:08 +02:00 |
|
Glenn Ruben Bakke
|
f4fd45bef3
|
nrf5/boards: Renaming bluetooth stack linker scripts to reflect version of the stack.
|
2017-04-24 22:22:17 +02:00 |
|
Glenn Ruben Bakke
|
bccfc7262d
|
nrf5/boards: adding some spaces in s132 makefile for pca10040.
|
2017-04-24 22:18:46 +02:00 |
|
Glenn Ruben Bakke
|
582db669b6
|
nrf5/boards: Renaming linker script for nrf52832 using bluetooth stack such that it also holds the version number of the stack. Updating linkerscript using the target linker script.
|
2017-04-24 22:02:41 +02:00 |
|
Glenn Ruben Bakke
|
39d3d7bb28
|
nrf5/bluetooth: Add support for downloading s132_2.0.1 bluetooth stack.
|
2017-04-24 21:56:28 +02:00 |
|
Glenn Ruben Bakke
|
3f96532952
|
nrf5/bluetooth: Switch over to downloaded bluetooth stacks from nordicsemi.com instead of getting them through the SDK's. This will facilitate download of s132 v2.0.0 later.
|
2017-04-24 21:46:28 +02:00 |
|
Glenn Ruben Bakke
|
ca43f42b78
|
nrf5/bluetooth: Fixing bug found when testing microbit. Newly introduced advertisment data pointer was not cleared on nrf51 targets. Explicit set to NULL as no additional advertisment data is set. Raises a question on why the nrf51 static variable was not zero initialized. To be checked up.
|
2017-04-23 18:35:31 +02:00 |
|
Glenn Ruben Bakke
|
f6e612f7d7
|
nrf5: Removing SDK_ROOT parameter to Makefile. Bluetooth stacks should be downloaded using the download_ble_stack.sh. The script should be run inside the bluetooth folder to work properly.
|
2017-04-21 18:58:57 +02:00 |
|
Glenn Ruben Bakke
|
a76ff755e3
|
nrf5/bluetooth: Adding back SOFTDEV_HEX as flash tools in main Makefile uses this to locate hex file.
|
2017-04-21 18:55:59 +02:00 |
|
Glenn Ruben Bakke
|
10b7f3ef83
|
nrf5/bluetooth: Including bluetooth stack version in folder name after download to be able to detect if stack has been updated.
|
2017-04-21 18:46:32 +02:00 |
|
Glenn Ruben Bakke
|
7501ecec8e
|
nrf5/bluetooth: Updating Bluetooth LE stack download script.
|
2017-04-21 18:23:48 +02:00 |
|
Glenn Ruben Bakke
|
f6f8097f77
|
nrf5/bluetooth: Adding bash script to automate download of bluetooth le stacks
|
2017-04-20 23:54:28 +02:00 |
|
Glenn Ruben Bakke
|
aa32dcd0fd
|
nrf5/examples: Adding example to show how to use current PWM module to control servo motors.
|
2017-04-18 21:03:14 +02:00 |
|
Glenn Ruben Bakke
|
071e551b79
|
nrf5/modules/machine: Updating PWM module with two new kwargs parameters. One for setting pulse with more fine grained. This value should not exceed the period value. Also, adding support for setting PWM mode, whether it is LOW duty cycle or HIGH duty cycle. By default, high to low is set (this could be changed).
|
2017-04-18 21:00:52 +02:00 |
|
Glenn Ruben Bakke
|
d0d350da16
|
nrf5/hal/pwm: Updating PWM implementation to support manually set duty cycle period. Pulse width has precidence over duty cycle percentage. Also adding support for the two configurable modes, high to low, and low to high, duty cycles.
|
2017-04-18 20:56:19 +02:00 |
|
Glenn Ruben Bakke
|
4d56f2a76d
|
nrf5/hal/pwm: Adding more configuration options to the PWM peripheral wrapper. Possibility to set pulse with manually, and also mode. The mode indicates whether duty cycle is low and then goes high, or if it is high and then go low. Added new type to describe the two modes.
|
2017-04-18 20:53:55 +02:00 |
|
Glenn Ruben Bakke
|
2d7f39855b
|
nrf5: Adding hal_gpio.c to Makefile's source list.
|
2017-04-11 13:59:54 +02:00 |
|
Glenn Ruben Bakke
|
1e79bdf0b4
|
nrf5/modules/machine: Updating Pin module to register a IRQ callback upon GPIO polarity change events.
|
2017-04-11 13:58:58 +02:00 |
|
Glenn Ruben Bakke
|
81aaf6e906
|
nrf5/hal/gpio: Adding initial gpiote implementation to handle IRQ on polarity change on a gpio.
|
2017-04-11 13:57:44 +02:00 |
|
Glenn Ruben Bakke
|
fb53bdf07c
|
nrf5: Moving initialization of pin til after uart has been initialized for debugging purposes. This will make it possible to use uart to print out debug data when adding gpio irq handlers.
|
2017-04-11 13:55:01 +02:00 |
|
Glenn Ruben Bakke
|
adf316afaa
|
nrf5/hal/gpio: Adding some new structures and functions to register irq channels to gpio's using GPIOTE peripheral
|
2017-04-11 13:53:37 +02:00 |
|
Glenn Ruben Bakke
|
f8c0a51f5e
|
nrf5/hal/gpio: Adding missing include.
|
2017-04-09 23:47:44 +02:00 |
|
Glenn Ruben Bakke
|
c7c2285ab9
|
nrf5/modules/machine: Style fix in pin object, indention.
|
2017-04-09 23:19:26 +02:00 |
|
Glenn Ruben Bakke
|
320b9ecde7
|
nrf5/modules/machine: Adding placeholder for irq method to pin object class.
|
2017-04-09 23:18:00 +02:00 |
|
Glenn Ruben Bakke
|
2c90d94dc7
|
nrf5/modules/machine: Adding pin irq type and basic functions and structures.
|
2017-04-09 23:16:07 +02:00 |
|
Glenn Ruben Bakke
|
a93d462dfd
|
nrf5/hal/gpio: Reintroducing gpio polarity toggle event to be able to reference the short form of adding high_to_low and low_to_high together.
|
2017-04-09 23:02:37 +02:00 |
|
Glenn Ruben Bakke
|
435bc5a3d4
|
nrf5/hal/gpio: Updating hal_gpio.h with some tab-fixes in order to make the file a bit consistent in style.
|
2017-04-09 21:56:28 +02:00 |
|
Glenn Ruben Bakke
|
8c45aca8d2
|
nrf5/hal/gpio: Removing toggle event from the enumeration as that will be a combination of the rising and falling together.
|
2017-04-09 21:54:09 +02:00 |
|
Glenn Ruben Bakke
|
6446105689
|
nrf5/modules/machine: Removing toggle event trigger as that will be a combination of the rising and falling together.
|
2017-04-09 21:52:57 +02:00 |
|
Glenn Ruben Bakke
|
32083a9443
|
nrf5/modules/machine: Adding new constants to pin object for polarity change triggers using the enumerated values in hal_gpio.h.
|
2017-04-09 21:50:11 +02:00 |
|
Glenn Ruben Bakke
|
07edf4f26d
|
nrf5/hal/gpio: Adding new enumeration for input polarity change events.
|
2017-04-09 21:49:02 +02:00 |
|
Glenn Ruben Bakke
|
3b15d33809
|
nrf5/hal: Moving hal_gpio functions, types and defines from mphalport.h to a new hal_gpio.h.
|
2017-04-09 21:39:15 +02:00 |
|
Glenn Ruben Bakke
|
35f9c8f37f
|
nrf5: Removing leftover reference to deleted display module.
|
2017-04-09 18:55:53 +02:00 |
|
Glenn Ruben Bakke
|
d7cfae3639
|
nrf5/usocket: Removing network modules related to Bluetooth 6lowpan implementation as it depends on SDK libraries for now. Will be moved to seperate working branch.
|
2017-04-09 18:53:58 +02:00 |
|
Glenn Ruben Bakke
|
4dd86178bc
|
nrf5: Removing custom display, framebuffer and graphics module to make branch contain core components instead of playground modules.
|
2017-04-09 18:25:15 +02:00 |
|