* atmel-samd: Add support for internal filesystems.
This allows us to re-enable `os`. `random` is also enabled because
it solely depends on `os`.
Fixes#266. Its also a pre-requisite for #260.
* atmel-samd: Update SAMD51 linker script comments and MICROPY_MAX_STACK_USAGE enabling.
This saves a lot of RAM. Fixes#287.
Also fixed compilation of frozen_mpy.c to use supplied make rule rather than
builtin rule (supplied rule suppresses printing out the gcc command line).
Backport of micro:bit random module.
Plugged into the port as a general random module for all nrf51/nrf52 targets. Works both with and without Bluetooth LE stack enabled.
Behavioral change: seed() method has been removed, as the use of RNG peripheral generates true random sequences and not pseudo-random sequences.
The driver also takes care of calling the Bluetooth LE stack for random values if the stack is enabled. The reason for this is that the Bluetooth LE stack take ownership of the NRF_RNG when enabled. Tolerate to enable/disable on the fly, and will choose to use direct access to the peripheral if Bluetooth LE stack is disabled or not compiled in at all.
Driver has been included in the top Makefile, and will not be compiled in unless nrf51_hal_conf.h/nrf52_hal_conf.h defines HAL_RNG_MODULE_ENABLED (1).
* nrf: Adding Arduino Primo board support
* nrf: Adding arduino_primo to target boards table in readme.md
* nrf/boards: Activating pyb.LED module for arduino_primo board.
* nrf/boards: Removing define not needed for arduino_primo
Updating arduino_primo board mpconfigboard.h. Removing a define
that was wrongly named. Instead of renaming it, it was removed as
it was never used.
Duplicating pattern for detecting location of libm, libc and libgcc
from teensy port. Activating MICROPY_FLOAT_IMPL (FLOAT) for nrf52 targets
and adding libs into the compile. For nrf51 targets it is still set to
NONE as code grows to much (about 30k).
Some numbers on flash use if MICROPY_FLOAT_IMPL is set to
MICROPY_FLOAT_IMPL_FLOAT and math libraries are enabled (lgcc, lc, lm).
nrf51:
======
without float support:
text data bss dec hex filename
144088 260 30020 174368 2a920 build-pca10028/firmware.elf
with float support:
text data bss dec hex filename
176228 1336 30020 207584 32ae0 build-pca10028/firmware.elf
nrf52:
======
without float support:
text data bss dec hex filename
142040 356 36236 178632 2b9c8 build-pca10040/firmware.elf
with float support:
text data bss dec hex filename
165068 1436 36236 202740 317f4 build-pca10040/firmware.elf
Printing "(null)" when a NULL string pointer is passed to %s is a debugging
feature and not a feature that's relied upon by the code. So it only needs
to be compiled in when debugging (such as assert) is enabled, and saves
roughy 30 bytes of code when disabled.
This patch also fixes this NULL check to not do the check if the precision
is specified as zero.
Header files that are considered internal to the py core and should not
normally be included directly are:
py/nlr.h - internal nlr configuration and declarations
py/bc0.h - contains bytecode macro definitions
py/runtime0.h - contains basic runtime enums
Instead, the top-level header files to include are one of:
py/obj.h - includes runtime0.h and defines everything to use the
mp_obj_t type
py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
and defines everything to use the general runtime support functions
Additional, specific headers (eg py/objlist.h) can be included if needed.
Qstr values fit in 16-bits (and this fact is used elsewhere in the code) so
no need to use more than that for the large lookup tables. The compiler
will anyway give a warning if the qstr values don't fit in 16 bits. Saves
around 80 bytes of code space for Thumb2 archs.
Building mpy-cross: this patch adds .exe to the PROG name when building
executables for host (eg mpy-cross) on Windows. make clean now removes
mpy-cross.exe under Windows.
Building MicroPython: this patch sets MPY_CROSS to mpy-cross.exe or
mpy-cross so they can coexist and use cygwin or WSL without rebuilding
mpy-cross. The dependency in the mpy rule now uses mpy-cross.exe for
Windows and mpy-cross for Linux.
CPython docs explicitly state that the RHS of a set/frozenset binary op
must be a set to prevent user errors. It also preserves commutativity of
the ops, eg: "abc" & set() is a TypeError, and so should be set() & "abc".
This change actually decreases unix (x64) code by 160 bytes; it increases
stm32 by 4 bytes and esp8266 by 28 bytes (but previous patch already
introduced a much large saving).
A lot of set's methods (the mutable ones) are not allowed to operate on a
frozenset, and giving frozenset a separate locals dict with only the
methods that it supports allows to simplify the logic that verifies if
args are a set or a frozenset. Even though the new frozenset locals dict
is relatively large (88 bytes on 32-bit archs) there is a much bigger
saving coming from the removal of a const string for an error message,
along with the removal of some checks for set or frozenset type.
Changes in code size due to this patch are (for ports that changed at all):
unix x64: -56
unix nanbox: -304
stm32: -64
esp8266: -124
cc3200: -40
Apart from the reduced code, frozenset now has better tab-completion
because it only lists the valid methods. And the error message for
accessing an invalid method is now more detailed (it includes the
method name that wasn't found).
* atmel-samd: Support patching after updating ASF4.
This makes it possible to automatically fix newer code.
* atmel-samd: Update ASF4 to include flash APIs for SAMD51.
This is the first automatic update that has caused a few deletions
where code was previously copied instead of moved.
This is a prerequisite for #260.
This returns a complex number, following CPython behaviour. For ports that
don't have complex numbers enabled this will raise a ValueError which gives
a fail-safe for scripts that were written assuming complex numbers exist.
This adds a new configuration option to print runtime warnings and errors to
stderr. On Unix, CPython prints warnings and unhandled exceptions to stderr,
so the unix port here is configured to use this option.
The unix port already printed unhandled exceptions on the main thread to
stderr. This patch fixes unhandled exceptions on other threads and warnings
(issue #2838) not printing on stderr.
Additionally, a couple tests needed to be fixed to handle this new behavior.
This is done by also capturing stderr when running tests.
It removes the need for a wrapper Python function to dispatch to the
framebuf method which makes each function call a bit faster, roughly 2.5x.
This patch also adds the rest of the framebuf methods to the SSD class.
The timer prescaler is buffered by default, and this patch enables ARPE
which buffers the auto-reload register. With both of these registers
buffered it's now possible to smoothly change the timer's frequency and
have a smoothly varying PWM output.
Allow literal minus in char classes to be in trailing position, e.g. [a-c-].
(Previously, minus was allowed only at the start.)
This increases ARM Thumb2 code size by 8 bytes.
* atmel-samd: Remove ASF3. This will break builds.
* atmel-samd: Add ASF4 for the SAMD21 and SAMD51.
* Introduce the supervisor concept to facilitate porting.
The supervisor is the code which runs individual MicroPython VMs. By
splitting it out we make it more consistent and easier to find.
This also adds very basic SAMD21 and SAMD51 support using the
supervisor. Only the REPL currently works.
This begins the work for #178.
Dan Halbert
Ayke van Laethem
Scott Shawcroft
Alex Vasylenko
Glenn Ruben Bakke
Damien George
Gabe
Radomir Dopieralski
chrismas9
Paul Sokolovsky
Scott Shawcroft
David Lechner
Anton Patrushev
Peter Hinch