dc2c8f0b1a
esp8266/axtls_helpers: Helper/wrapper functions for axTLS.
2016-04-27 14:54:36 +03:00
648333d2d5
esp8266/Makefile: Override abort() when building axtls.
...
abort() is a special function known to compiler as no-return.
2016-04-27 13:41:59 +03:00
6149ce01f8
esp8266/Makefile: Add target to build axTLS.
2016-04-27 00:35:13 +03:00
6d103b6548
py: Move call_function_*_protected() functions to py/ for reuse.
...
They almost certainly needed by any C code which calls Python callbacks.
2016-04-25 19:31:17 +03:00
73ccb3fc5b
esp8266: Adapt port to use new auto-qstr generation.
2016-04-16 13:20:02 +01:00
4f811d0e4c
esp8266: Enable input() builtin.
2016-04-15 00:08:39 +03:00
df3b1741b6
esp8266: Separate 1-wire timing funcs from Python module to save iRAM.
...
esponewire.c contains low-level timing-critical functions that go in
iRAM. modonewire.c contains Python wrapper code.
2016-04-14 12:44:26 +01:00
674bf1bc81
esp8266: Add hard IRQ callbacks for pin change on GPIO0-15.
2016-04-14 12:44:26 +01:00
a525493e40
esp8266: Switch from using custom I2C driver to generic extmod one.
2016-04-12 14:06:54 +01:00
1a0a323ca8
esp8266: Add initial implementation of machine.UART.
...
Currently UART(0) and UART(1) are exposed and only uart.write works.
2016-04-06 19:45:52 +03:00
919b70b7ec
esp8266: Switch back to flashing combined firmware (single file).
...
With gap between segments minimized, there's not much padding to flash,
so no big speed overhead.
2016-04-03 15:48:46 +03:00
8d2bcaf3cd
esp8266: Minimize gap between Inst/DataRAM segments and FlashROM segment.
...
With .rodata being in FlashROM now, gap can be much smaller now. InstRAM
can be max 32K, and with segment headers, that already makes it more than
32K. Then there's some .data still, and the next Flash page boundary is
0x9000. That figure should be more or less future-proof.
TODO: Refactor makeimg to take FlashROM segment offset from file name.
2016-04-03 15:45:14 +03:00
ef0c5db2ed
esp8266: Move .rodata where it belongs with -mforce-l32 help.
2016-04-03 00:51:51 +03:00
c4506ed869
esp8266: Let esp8266 "os" messages go to standard (REPL) UART.
...
That's definitely helpful for debugging.
2016-03-29 21:10:10 +03:00
b01a373adb
esp8266: deploy: Use --flash_size=8m option to esptool.py.
...
Most esp8266 modules have at least 1MB (8Mbit) of flash. If not set, vendor
functions allow to access only first 512K.
2016-03-28 11:28:16 +03:00
374654f2b8
esp8266: Enable FatFs support.
2016-03-27 17:13:47 +03:00
3962766be0
esp8266: Add esp.neopixel_write function to bit-bang WS2812 data.
2016-03-26 10:55:21 +02:00
632d8efa05
esp8266: Add PWM support.
...
PWM implementation uses a timer and interrupts (FRC1), taken from
Espressif's/NodeMCU's implementation and adapted for our use.
8 channels are supported, on pins 0, 2, 4, 5, 12, 13, 14, 15.
Usage:
import machine
pwm0 = machine.PWM(machine.Pin(0))
pwm0.freq(1000)
pwm0.duty(500)
Frequency is shared (ie the same) for all channels. Frequency is
between 1 and 1000. Duty is between 0 and 1023.
2016-03-26 00:32:37 +02:00
82b95f625e
esp8266: Implement software SPI class.
...
Supports speeds up to 500k baud, polarity=0/1, phase=0/1, and using any
pins. Only supports MSB output at the moment.
2016-03-25 23:28:13 +02:00
78d0dde562
esp8266: Add onewire helper functions as C module.
...
Includes functions to read and write bits and bytes.
2016-03-24 17:33:42 +02:00
dd32f02cc3
esp8266: Add basic I2C driver, with init and writeto methods.
...
Tested and working with SSD1306 I2C display.
2016-03-24 11:17:17 +02:00
9d7b871f58
esp8266: Store frozen modules in FlashROM.
...
Requires special lexer to access their contents.
2016-03-17 23:06:47 +08:00
e5c39a3a9e
esp8266: Switch to lwIP built from source.
...
Using https://github.com/pfalcon/esp-open-lwip project.
2016-03-12 11:45:53 +07:00
932f07ccf5
esp8266: Rejig Makefile so extmod/modlwip.o is placed under build/.
2016-03-11 12:00:01 +07:00
6e5c31c947
esp8266: Be sure to build ets_alt_task.
2016-03-11 09:43:39 +07:00
d684f872bd
esp8266/Makefile: Add define for ESP8266 lwIP.
2016-03-08 10:29:05 +07:00
05dda0ee9e
esp8266: Enable modlwip.
2016-03-08 10:21:50 +07:00
52d7685d9a
esp8266: Allow Makefile's BAUD variable to be overridden.
2016-03-06 05:57:36 +02:00
4284b3811f
esp8266: Enable modmachine.
2016-03-04 17:37:13 +02:00
7480ee5892
esp8266: Enable uhashlib module.
2016-03-03 20:14:50 +02:00
d083d7d610
esp8266: Allow Makefile's PORT variable to be overridden.
2016-03-02 22:50:55 +02:00
6f4357c28e
esp8266: Enable math module.
2016-03-02 22:43:10 +02:00
6d0629bddc
esp8266: Enable float support, using 30-bit stuffed floats.
...
No complex numbers though.
2016-03-02 22:43:10 +02:00
adfe4ff72a
esp8266: Support CFLAGS_EXTRA.
2016-01-08 01:30:20 +02:00
73ff0687f2
lib/utils/printf: Move from stmhal/ .
...
This file contains various MicroPython-specific helper functions, so isn't
good fit for lib/libc/.
2015-11-10 18:58:58 +02:00
0ec51441de
stmhal: pyexec.c is common module, move to lib/utils/ .
2015-10-31 19:35:10 +03:00
0dbd928cee
Makefiles: Remove duplicate object files when linking.
...
Scenario: module1 depends on some common file from lib/, so specifies it
in its SRC_MOD, and the same situation with module2, then common file
from lib/ eventually ends up listed twice in $(OBJ), which leads to link
errors.
Make is equipped to deal with such situation easily, quoting the manual:
"The value of $^ omits duplicate prerequisites, while $+ retains them and
preserves their order." So, just use $^ consistently in all link targets.
2015-10-24 15:46:53 +03:00
e0f5df579b
all: Make netutils.h available to all ports by default.
...
Generally, ports should inherit INC from py.mk, append to it, not
overwrite it. TODO: Likely should do the same for other vars too.
2015-10-19 18:32:42 +03:00
229b908d2e
esp8266: Remove "time" command from deploy target.
2015-09-12 22:22:30 +01:00
b19d273beb
esp8266: Allow to easily override programming baudrate.
2015-07-04 00:36:10 +03:00
ee3fec3167
esp8266: Add skeleton "network" module.
...
MicroPython "network" module interface requires it to contains classes
to instantiate. But as we have a static network interace, make WLAN()
"constructor" just return module itself, and just make all methods
module-global functions.
2015-06-12 17:45:20 +03:00
25a8a42447
esp8266: Add pyb.ADC class
2015-05-28 21:31:37 +03:00
59610c4004
esp8266: Add uos module
...
Currently implements only .uname()
2015-05-26 22:18:07 +03:00
1c132c8587
esp8266: Add configuration option for redirecting the built-in OS output
2015-05-13 18:03:00 +02:00
103d12a877
esp8266: Add utime and pyb.RTC
2015-05-13 00:12:54 +01:00
bda7041294
esp8266: Add support for frozen modules
2015-05-06 22:04:20 +01:00
9e00ac89d5
esp8266: Add esp.socket class, with ESP-style socket functionality.
...
* UDP currently not supported
* As there is no way (that I know of) the espconn_regist_connectcb()
callback can recognize on which socket has the connection arrived,
only one listening function at a time is supported
2015-05-04 11:48:40 +01:00
3a84c8b58d
string0.c: Move from stmhal/ to lib/.
2015-04-05 21:57:55 +03:00
87c6250b4c
esp8266: Add basic pyb.Pin class; supports output mode only.
2015-02-13 22:21:44 +00:00
0b32e50365
stmhal: Make pybstdio usable by other ports, and use it.
...
Now all ports can use pybstdio.c to provide sys.stdin/stdout/stderr, so
long as they implement mp_hal_stdin_* and mp_hal_stdout_* functions.
2015-02-13 15:04:53 +00:00
Paul Sokolovsky
Damien George
Josef Gajdusek