djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
10,465 Commits 21 Branches 274 Tags 785 MiB
Commit Graph

217 Commits

Author SHA1 Message Date
Scott Shawcroft
28642ab10d Add audio output support! 
This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.

Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.

Fixes #652. Fixes #522. Huge progress on #263
 2018-04-12 16:35:13 -07:00
Scott Shawcroft
2a26dac2bc Add initial ItsyBitsy M4 support 2018-04-12 11:16:52 -07:00
Dan Halbert
eaa9923a8f force_create rename got lost due to editing error 2018-04-10 12:24:27 -04:00
Dan Halbert
5f98953ed8 esp8266 and nrf: raise NotImplementedError 2018-04-10 12:08:41 -04:00
Jeff Epler
eb7d0e317a Create genhdr/ directory in time 2018-04-09 22:23:39 -04:00
Dan Halbert
aa8c262d14 add storage.erase_filesystem() to erase and reformat CIRCUITPY 2018-04-09 12:52:42 -04:00
Scott Shawcroft
4e053cea0d
Merge pull request #628 from sommersoft/super_status 
Added Function To Check the Serial Connection From CircuitPython Layer
 2018-04-08 22:06:09 -07:00
Dan Halbert
1e87a785b9 Move CDC Comm back to Interface 0 for compat with Win7 drivers. 2018-04-08 15:59:19 -04:00
Dan Halbert
726d5e52a3 Merge branch 'master' into 3.0_hid 2018-04-08 09:52:29 -04:00
Dan Halbert
a159b85340 Reorder composite device interfaces; fix report length bug 2018-04-08 09:33:02 -04:00
Jeff Epler
fe6f5aaa70 atmel-samd: reset: reset() was always entering bootloader mode 
.. set the dbl_tap word to a different special value unless
RUNMODE_BOOTLOADER was selected
 2018-04-05 08:16:53 -05:00
Jeff Epler
5eb9f9d060 atmel-samd: Fix rebooting to bootloader 
Commit efbf08266b6 moved _estack in order to ensure 8-byte alignment
of the stack, but the address of _bootloader_dbl_tap must remain
right at the end of SRAM.

I verified by reading the source that the 4-byte-aligned address is
used for all samd21 / samd51 boards in
adafruit/circuitpython@efbf08266b.  However, I only tested on
trinket_m0.

Closes: #739
 2018-04-03 21:40:10 -05:00
Dan Halbert
beb6ad2e40 Add USB HID support, including Consumer Control 2018-04-02 21:37:44 -04:00
Dan Halbert
435e894fa0 Merge branch 'master' into 3.0_hid 2018-04-02 19:19:43 -04:00
Dan Halbert
d005b12326 WIP: seems to be done 2018-04-02 19:08:18 -04:00
Dan Halbert
c00b25ec45 WIP: HID works with MSC interfaces removed 2018-03-30 23:31:28 -04:00
Dan Halbert
df91878d2e WIP: works with just keyboard but not complex report descriptor 2018-03-30 23:24:00 -04:00
sommersoft
8af98d0dc9 ambiguized directory paths 2018-03-30 22:44:16 +00:00
sommersoft
a5b60647be improved arrangement 2018-03-30 22:26:21 +00:00
sommersoft
7c0be04696 verbiage cleanup 2018-03-30 22:21:35 +00:00
sommersoft
c70acab8b3 updated README; added git submodule info 2018-03-30 22:16:36 +00:00
sommersoft
6ee573c7c9
Merge branch 'master' into super_status 2018-03-30 14:27:39 -05:00
Scott Shawcroft
676ed4e199
Merge pull request #724 from tannewt/fix_freetouch_submodule 
Remove freetouch files that were accidentally checked in and
 2018-03-28 14:24:32 -07:00
Scott Shawcroft
19b0b414e6 Remove freetouch files that were accidentally checked in and 
readd the submodule.
 2018-03-28 14:04:53 -07:00
Jeff Epler
abec199c19 Enable high-quality float hash 
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.

Closes: #704
 2018-03-27 21:56:30 -05:00
Dan Halbert
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis 
Allow building on gcc 5.4, while preserving ability to build with 7.2
 2018-03-27 09:28:41 -04:00
Kattni
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang 
Fix I2C init hang when the SCL pin is pulled low.
 2018-03-26 20:08:14 -04:00
Dan Halbert
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis 
Remove 'O', 'P' support in arrays
 2018-03-26 20:01:34 -04:00
Scott Shawcroft
cebcec5e63 Check for floating pins by pulling them low briefly before testing their values. 2018-03-26 16:32:16 -07:00
Jeff Epler
355bf8b553 Conditionally compile out nonstandard array/struct typecodes 
.. defaulting to off for circuitpython-supported boards, on for others.

.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
 2018-03-26 18:13:49 -05:00
Scott Shawcroft
25ba8ee489 Add an s because grammar. 2018-03-26 15:21:08 -07:00
Scott Shawcroft
37538fc0e7 Fix I2C init hang when the SCL pin is pulled low. 
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
 2018-03-26 15:13:52 -07:00
Scott Shawcroft
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix 
Fix 128 Character Max Paste Into REPL
 2018-03-26 13:02:43 -07:00
sommersoft
9bd55cf4c7
minor cleanup 2018-03-26 08:14:37 -05:00
sommersoft
23009fdd63 future-proof for buffer size changes 2018-03-26 06:25:04 +00:00
Dan Halbert
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis 
correct typo in filename
 2018-03-25 23:58:00 -04:00
Jeff Epler
d57397f9c8 Remove an unneeded -Wno-error=lto-type-mismtach 2018-03-25 22:04:15 -05:00
Jeff Epler
c0029e1d97 Don't lose half of the processor's serial number 
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
 2018-03-25 13:01:04 -05:00
Dan Halbert
31f5b6a238 WIP: simple working HID 2018-03-24 18:29:12 -04:00
Jeff Epler
d80e54458d correct typo in filename 2018-03-24 10:44:24 -05:00
sommersoft
6205ed9a0c updated cdc_enabled; now more dynamic status return 2018-03-24 03:42:58 +00:00
sommersoft
ef16109c5d updated with requested changes 2018-03-24 00:55:48 +00:00
sommersoft
f237657e5e extended buffer check to usb_cdc_background 2018-03-23 18:41:27 +00:00
Scott Shawcroft
63d826a52a
Update USB PID 2018-03-23 09:34:02 -07:00
sommersoft
ccbe557e30 removed leftover debugging bits 2018-03-23 15:45:30 +00:00
sommersoft
d434635822 add buffer check before triggering new usb read 2018-03-23 15:07:02 +00:00
Scott Shawcroft
fd7dcff4e9 Add Feather M4 Express support. 
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
 2018-03-23 00:00:13 -07:00
Scott Shawcroft
06b4c83f59 Add reminder to remove Saleae when going fast. 2018-03-22 17:44:44 -07:00
Scott Shawcroft
3bf4d69f67 Update Metro M4 to rev F and make flash reset on start. 2018-03-22 16:42:47 -07:00
Jeff Epler
a7e3c74fed Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive 
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.

It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.

These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.

Closes: #689
 2018-03-22 08:07:32 -05:00