49aacc8596
ADD: Fixed wrong SPI pins and added more functional pins
2020-07-03 12:43:21 +08:00
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0
...
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 15:43:32 -07:00
fce35c3481
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 22:57:58 +02:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
0537f4e775
restore-ndgarage_ndbit6-to-original
2020-07-01 14:12:52 -06:00
c759c9a2aa
add-ndgarage_ndbit6_v2-update
2020-07-01 13:58:07 -06:00
b80dbb4b2c
add-ndgarage_ndbit6_v2
2020-07-01 12:06:59 -06:00
d4e28dd233
ADD: added more special pins on Wio Terminal
2020-07-01 17:06:26 +08:00
11cb3e3b4b
hci skeleton done; not working yet
2020-06-30 23:19:40 -04:00
74ad5e80ce
Merge pull request #3089 from ansonhe97/main
...
Add: added Seeed's Wio Terminal Board Support
2020-06-30 10:58:24 -07:00
4613f80d7a
Fix end of line
2020-06-29 17:41:48 +08:00
0dd17f4418
Add: Added Seeed Wio Terminal board support
2020-06-29 16:22:41 +08:00
c5db97c50f
atmel-sam: sdio: disable debug prints by default
2020-06-26 13:16:16 -05:00
f496c0b58d
atmel-samd: Add SDIO SD card interface
2020-06-26 11:50:42 -05:00
d4b9458512
samd: sdio: Add needed files from atmel start
2020-06-26 11:50:41 -05:00
57fde2e07b
sdcardio: implement new library for SD card I/O
...
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
3e616ccead
update submodules
2020-06-26 12:21:57 -04:00
759929c24a
hci early wip; refactor supervisor bluetooth.c for nrf: tested
2020-06-25 20:57:17 -04:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
076a96ccc6
Merge pull request #3046 from jepler/same51
...
Add basic SAM E54 support and SAM E54 Xplained board
2020-06-25 06:55:27 -05:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices
...
Compute USB_DEVICES instead of requiring it to be specified
2020-06-24 13:31:56 -05:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
38659b566c
atmel-samd: Finish disabling USB MIDI and/or HID on certain boards
2020-06-23 10:56:27 -05:00
d5074220a8
atmel-samd: Add SAM E54 Xplained board
...
Few peripherals are actually tested. However, USB, I2C and GPIO seem to work.
Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.
The default SPI, I2C, and UART are the ones on the EXT2 header. This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00
da733c01da
atmel-samd: Add support for SAM E54 family MCUs
...
This introduces the new macro SAM_D5X_E5X. This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
2020-06-23 10:41:48 -05:00
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board
...
PID request for a new board configuration
2020-06-22 15:09:42 -07:00
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay
...
delay 1ms on SAMD51 when reading processor voltage
2020-06-22 14:29:43 -07:00
d43449a6d6
sparkfun samd51 thing plus: Fix board.I2C()
...
This had the SDA and SCL pins transposed, so nothing worked.
2020-06-22 10:45:27 -05:00
a770b5a919
never_reset_pin: Move pin validity check before first use of pin number
2020-06-22 10:45:27 -05:00
6638bc32c3
samd: Makefile: Regularize whitespace
2020-06-22 10:45:27 -05:00
a580f0f1c4
_pew: move to common-hal
...
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10). Move it.
There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
1687c8b1e3
delay 1ms on SAMD51 when reading processor voltage
2020-06-19 15:25:04 -04:00
b316549590
Added the new assigned VID/PID pair
2020-06-19 19:26:29 +03:00
178be2e3c9
loc_ber_m4_base_board
2020-06-19 18:56:20 +03:00
3c3cad5ae6
docs: Improve 5.0.x <-> main branch doc linkrot
...
This improves, but does not entirely fix, the broken links that result
from the autoapi change. It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
2020-06-14 11:12:35 -05:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio
...
Finish digitalio and pin use tracking for ESP32S2
2020-05-26 19:18:45 -04:00
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi
...
fix racing issue for SAMD when executing WFI
2020-05-26 14:54:24 -07:00
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894
...
Add an increment to tcc_refcount to allow deinit to work correctly
2020-05-26 14:39:59 -07:00
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0
...
Add support for Fluff M0
2020-05-26 13:18:55 -07:00
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
4974c933b1
Fix swapped SCK and MISO in Fluff M0
2020-05-26 03:29:05 +02:00
e79340601f
fix racing issue for SAMD when executing WFI
2020-05-25 20:51:02 +07:00
5cffd7e88d
trinket_m0_haxpress: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
eb85304d04
escornabot: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
03866c0598
meowmeow: disable modules to make build fit with upcoming translations
2020-05-23 20:41:25 -05:00
2ed40075a5
pyruler: disable RTC to make build fit with upcoming translations
2020-05-23 20:36:33 -05:00
4c01ddcbab
Add support for Fluff M0
2020-05-22 18:51:12 +02:00
2e05f628f0
Add an increment to tcc_refcount to allow deinits to work properly
2020-05-21 11:08:26 -05:00
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio
2020-05-21 08:52:39 -07:00
4f54514be4
Initial version
2020-05-20 21:11:06 -05:00
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-20 10:48:27 -07:00
fd0420d432
Update digitalio api for other ports
2020-05-20 09:23:42 -07:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
acf4b1bede
Remove reverse methods from per-board defs
2020-05-19 11:43:57 -07:00
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins
2020-05-19 10:55:02 -07:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2
2020-05-18 16:46:41 -07:00
9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode
...
Add bytearray.decode() for CPython compatibility
2020-05-18 14:38:45 -07:00
e175a64036
disable rotaryio in CPX crickit
2020-05-15 20:35:12 -04:00
8edb8e87c8
Turn reverse methods off for trinket haxpress
2020-05-15 17:22:22 -07:00
86f865afe0
Turn reverse methods off for cpx_crickit
2020-05-15 16:42:22 -07:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
a3ca9401b4
Shrink crickit build
2020-05-15 18:29:37 -04:00
0d8bca92e2
Merge pull request #2810 from dherrada/master
...
Pyi integration
2020-05-15 10:31:05 -07:00
db4dbe0752
Merge pull request #2889 from jepler/gamepad-tick
...
Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick
2020-05-13 11:53:23 -07:00
adef45403b
samd: audio dma: enable/disable supervisor tick as needed
2020-05-13 10:29:36 -05:00
7546d47f77
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-13 08:23:55 -07:00
80129c5a21
Disable countio on trinket haxpress
2020-05-12 18:55:49 -07:00
cde6651721
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-12 18:23:59 -07:00
277e8d528b
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 18:22:57 -07:00
4e8de3c554
Swap sphinx to autoapi and the inline stubs
2020-05-12 17:28:24 -07:00
5a80f5e606
nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size
2020-05-12 15:23:00 -07:00
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio
2020-05-12 12:29:05 -07:00
bc40034a08
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 12:12:51 -07:00
f7303e6bd0
Merge pull request #2754 from maholli/non-standard-nvm
...
Add non-standard nvm to QSPI for external flash support
2020-05-12 11:56:33 -07:00
62bdfb74e3
removed lib from catwan_usbstick - updated transalations overflowed
2020-05-12 16:40:23 +10:00
5e5461e77e
removed countio from catwan_usbstick build
2020-05-12 16:32:35 +10:00
ee2cb703c8
merged master
2020-05-12 14:41:28 +10:00
55f78bfb70
Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol
...
ujson: work with mp stream protocol for fast & easy read
2020-05-11 15:40:27 -07:00
407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset()
...
Added an #if CIRCUITPY_RTC check for platforms supporting RTC
2020-05-11 12:03:44 -05:00
2ddfab315c
Added call to rtc_reset() in rtc_init()
...
Fix for issue #2872 . The rtc_time_source had not been initialized; causing a time.time() call to fail.
2020-05-11 11:31:18 -05:00
eb3d5fa453
ujson: do not eat trailing whitespace
...
Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers.
When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout.
Fixes:
- Waiting for a timeout after you have completed reading a correct and complete JSON off the input.
- Raising an OSError after reading a correct and complete JSON off the input.
- Eating more data than semantically owned off the input buffer.
- Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object.
Code you would write before:
```
line = board_busio_uart_port.read_line()
json_dict = json.loads(line)
```
or reaching for fixed buffers and swapping them around in Python.
Code that did not work before that does now:
```
json_dict = json.load(board_busio_uart_port)
```
- This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs.
- It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA.
- It simplifies code that users write while improving their apps.
2020-05-10 20:45:42 -07:00
206d0e598a
Add vectorio: for drawing shapes
...
vectorio builds on m4 express feather
Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.
VectorShape provides transpose and x/y positioning for shape implementations.
Included Shapes:
* Circle
- A radius; Circle is positioned at its axis in the VectorShape.
- You can freely modify the radius to grow and shrink the circle in-place.
* Polygon
- An ordered list of points.
- Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last
point and the first point.
- You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a
top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
x and y properties will position the rectangle relative to its top center point
* Rectangle
A width and a height.
2020-05-09 15:38:22 -07:00
8d00d99ca0
Shrink hallowing_m0_express to fit ko build
2020-05-08 22:51:21 -04:00
7f1be814c8
changed build variables as per advice
2020-05-06 09:04:15 +10:00
f63ee9fb9b
excluded countio from other smaller boards
2020-05-05 16:15:57 +10:00
d5c24b99b8
hallowing m0 - exclude countio
2020-05-05 16:04:28 +10:00
bfa5cd9c13
refactor countio based on feedback
2020-05-05 15:23:38 +10:00
602eabe668
Squeeze hallowing_m0_express build slightly
...
ko build is a little too big.
2020-05-04 17:18:53 -04:00
c377d4bea7
Merge branch 'master' into non-standard-nvm
2020-05-04 16:08:45 -04:00
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power.
...
Enable pixelbuf in its place because we'll need it soon.
2020-04-29 13:57:09 -07:00
b2de5a9df9
fixing my goofy gcc-arm local stuff
2020-04-28 12:24:10 -07:00
6c4decd4e2
decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE
2020-04-28 11:51:07 -07:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
86943ca8a1
Merge remote-tracking branch 'adafruit/master'
2020-04-27 13:51:51 -07:00
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb
...
Update tinyusb
2020-04-26 20:55:36 -07:00
bd0df9e3bc
Minor redundancy fix
2020-04-23 17:43:35 -04:00
c6c77726e7
Merge remote-tracking branch 'upstream/master' into stm32-docfix
2020-04-23 13:39:48 -04:00
8791ca6af3
implement requested changes
2020-04-23 13:33:41 -04:00
dcb0e50f04
Fix USB midi and hid disable.
2020-04-21 14:15:44 -07:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
a4d86b96fd
Merge pull request #2777 from pewpew-game/master
...
Fix RGB/BGR colors in Stage
2020-04-20 15:25:29 -07:00
5fcc6d6286
RGBMatrix: finish renaming from Protomatter
...
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
3d6258f63d
Rename Protomatter -> RGBMatrix
...
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
a32337718d
Rename _protomatter -> protomatter
...
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
7e3d4c61b5
Update TinyUSB and add interrupt hooks.
2020-04-17 14:16:49 -07:00
43022d8294
Add copyrights to pewpew m4 and ugame board.c
2020-04-17 09:50:11 +02:00
b3552efc76
Remove accidental file
2020-04-16 11:28:01 -07:00
f39ca6052e
Fix RGB/BGR colors in Stage
...
This makes the colors used by the stage library compatible with those
used by the displayio library.
2020-04-15 23:41:38 +02:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
23bced26da
samd: actually disable protomatter timer
...
Just setting the timer handler to NO_INTERRUPT doesn't stop the
interrupt from occurring.
2020-04-14 18:24:58 -05:00
759fdffda5
Update ports/atmel-samd/boards/pyportal_titano/board.c
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-04-14 18:24:58 -05:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
a51d4f7a45
pycubed: add trailing newline to file
...
POSIX specifies that text files end in a trailing newline
2020-04-14 18:24:54 -05:00
cac4fb0318
Merge branch 'master' into nfc_copy
2020-04-09 17:05:11 -05:00
49771b4d7f
Update to v1.3
2020-04-09 14:27:51 -05:00
d0a25ca9ac
Tweaks based on dhalberts feedback
2020-04-08 10:49:46 -07:00
181ecf4a9b
fixing my goofy CROSS_COMPILE fix
2020-04-07 21:54:46 -07:00
a53a26be70
missed a debug flag
2020-04-07 18:24:53 -07:00
826837186c
adds standard (non-queued) SPI support to QSPI for external flash
2020-04-07 18:17:25 -07:00
c0ba2a839f
Updates based on feedback from jepler
2020-04-06 16:03:31 -07:00
e99cf6e441
Rework sleep timing
...
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
2020-04-03 18:07:56 -07:00
46af4bdd0e
Fix SAMD21 PulseIn
2020-04-02 17:35:52 -07:00
77562a2acd
Update the supported ports
2020-03-31 18:27:55 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
7cfa8e1a68
board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.
2020-03-29 18:59:00 -04:00
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
e4c4a4a3de
Swap to committed dependencies
2020-03-27 14:39:59 -07:00
b043384949
Update built in display init
2020-03-27 14:35:29 -07:00
7fa38e8725
Update board name to bdmicro_vina_m0 to eliminate hyphens.
2020-03-27 13:37:59 -04:00
14a1e5756e
Merge branch 'master' of https://github.com/adafruit/circuitpython
2020-03-26 20:28:54 -04:00
2ae9edcbff
Add new board BDMICRO 'Vina M0'.
...
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.
Has been extensively tested with CircuitPython and works well.
2020-03-26 20:15:54 -04:00
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight
...
Add backlight polarity flag to Display
2020-03-26 14:00:47 -07:00
ff67571e9a
Add GD25Q64C as a flash chip for Sol
2020-03-26 12:33:27 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
5e559be9b5
Remove Adafruit_CircuitPython_CircuitPlayground
2020-03-24 21:10:34 +00:00
39a19d54c2
Add support for Commander
2020-03-22 16:23:56 +00:00
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button
...
Add board support for Winterbloom Big Honking Button
2020-03-18 17:37:59 -07:00
e027aaf433
Remove some build options, fix order of boards in build.yml
2020-03-18 16:49:10 -07:00
7332adfa21
Add board support for Winterbloom Big Honking Button
2020-03-18 16:29:44 -07:00
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab
...
update ulab
2020-03-17 15:33:08 -07:00
6db11cf68b
Fix up Spresense build. It doesn't sleep.
2020-03-17 14:21:45 -07:00
d9e68156b2
fix up SAMD21 sleep
2020-03-17 12:10:35 -07:00
d6342af980
ulab: rename enable macro so it appears in the support matrix
2020-03-17 09:33:03 -05:00
76ca13b6ed
Fix SAMD51 pulsein
2020-03-13 17:21:15 -07:00
7100d5e485
Fix autoreload and ticks in general
2020-03-13 16:13:24 -07:00
df5be65423
Update FrequencyIn for new clock API.
2020-03-13 16:12:52 -07:00
c9aa50817c
add UARTLogger2 board support for CircuitPython
2020-03-13 21:39:17 +01:00
4fba4eb133
Switch from 1k RTC input to 32k output
2020-03-13 11:16:41 -07:00
48b5f2a384
Initial work on SAMD
2020-03-13 11:16:41 -07:00
6363b5ad06
Merge pull request #2693 from jepler/ulab-enable
...
ulab: enable on most builds
2020-03-10 09:48:46 -04:00
03a2b2faf1
ulab: don't enable on m0 boards
2020-03-09 23:00:21 -05:00
210c3274e5
Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup
2020-03-05 17:47:01 -05:00
409a4a9490
Disable the HID USB descriptor for Sol
...
It's not used and ends up being confusing for folks.
2020-03-04 23:22:46 -08:00
8435935429
update uses of assert_pin_free; remove redundant checks
2020-02-29 15:37:32 -05:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
fa3b9eba92
ulab: Incorporate it
2020-02-27 11:03:03 -06:00
f20255813f
samd51 thing plus: new port
...
testing performed:
* successfully store and retrieve a 500kB file on the flash
* square wave output on each pin appears on o'scope
* board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
dcc8abf74e
Merge pull request #2638 from fgallaire/master
...
Arduino Nano 33 IoT support
2020-02-22 00:12:06 -05:00
96db16a7a2
Last NINA pins
2020-02-22 04:30:18 +01:00
39ec5d0e51
Add NINA pins
2020-02-21 01:34:52 +01:00
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485
...
Addition of RTS/CTS/RS485 capability
2020-02-19 10:35:57 -08:00
fba0b302ff
Add Arduino Nano 33 IoT support
2020-02-19 08:56:06 +01:00
63bcd52a5a
Add Arduino Nano 33 IoT documentation
2020-02-19 08:50:27 +01:00
1f148242db
Merge pull request #2605 from maholli/master
...
New board: PyCubed + updates to SAM32 board
2020-02-18 22:01:41 -05:00
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
2b79d8ffe9
adding PWM to board.c for external WDT
2020-02-18 14:16:54 -08:00
93760042fa
no current need for NVM
2020-02-16 11:43:19 -08:00
dc97b0d844
correct chec^Cfor flash erase boundaries
2020-02-13 17:41:05 -05:00
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
b91c4e66cb
adding Adafruit_CircuitPython_Register to frozen + updating SAM32
2020-02-08 16:09:47 -08:00
84fa0c187e
adding new board - PyCubed
...
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
2020-02-08 15:33:25 -08:00
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement
...
Monotonic ns improvement; time.sleep rounds to nearest msec
2020-02-07 11:03:37 -08:00
71672fd244
Merge pull request #2599 from ladyada/master
...
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-07 12:59:30 -05:00
005c4caf8c
fix function defs for compiler
2020-02-07 10:32:37 -05:00
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
789e311b63
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-06 16:28:02 -05:00
d93d491a61
Cleaned up CircuitBrains Basic and Deluxe board definitions
2020-02-06 14:47:22 -06:00
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
f3188669e4
Added CircuitBrains Basic and Deluxe Boards
2020-02-05 14:52:47 -06:00
a4ebd2f7c1
allow tuple or list for Palette color
2020-02-03 22:09:53 -05:00
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
3b95d7c16a
add gamepad to specialty cpx builds; update frozen libs
2020-01-30 21:00:47 -05:00
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf
2020-01-30 10:59:21 -08:00
5d24ade5c9
Tweak error messages to reduce code size.
2020-01-29 17:32:07 -08:00
898f4e1f72
Merge branch 'master' into stm32-meowbit
2020-01-29 16:32:08 -05:00
100409961a
Move board_init to main.c
2020-01-29 16:29:43 -05:00
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma
...
samd: When possible, use one DMA channel for stereo AudioOut
2020-01-27 14:15:26 -08:00
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev
...
Refine iMX RT memory layout and add three boards
2020-01-27 14:11:08 -08:00
c8f969feb5
samd: audio-dma: avoid memory allocations
...
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations. This was
enough to cause MemoryErrors with regularity.
By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
2020-01-27 08:49:41 -06:00
cb6193bbc7
samd: When possible, use one DMA channel for stereo AudioOut
...
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time. This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half. (the number of bytes transferred
remains the same, though)
In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values. However, this is the
case that matters for stereo mp3 playback on PyGamer.
Testing performed: Listened to some tracks with good stereo separation.
2020-01-26 15:36:24 -06:00
6f13979c9b
pygamer and pybadge boards were not resetting neopixels
2020-01-24 09:32:28 -05:00
68f9aee992
reset NeoPixels on CPB on soft reload
2020-01-23 20:16:31 -05:00
fe70072d68
Merge branch 'master' into ndbit6
2020-01-23 12:32:19 -05:00
4675783545
change-name-to-ndgarage_ndbit6
2020-01-23 09:55:17 -07:00
41a85b71fc
init nfc copy
2020-01-22 20:30:33 -06:00
4923caf85e
Increase CPX stack size by 256
2020-01-21 18:53:55 -05:00
97420994e8
Merge remote-tracking branch 'origin/master' into capablerobot-usbhub
2020-01-20 13:11:57 -05:00
1c39606345
Fix other builds missing new heap bounds functions
2020-01-18 18:06:56 -08:00
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm
...
nrf: Add bonding to BLE pairing support
2020-01-15 16:11:09 -08:00
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed
...
CircuitPython support for the Open Book
2020-01-15 17:21:19 -05:00
d6e657b593
Initial commit.
2020-01-14 16:51:27 -05:00
eb481c9247
add support for the Open Book
2020-01-14 16:34:46 -05:00
50e718be99
second revision to line breaks for visibility per dhalbert
2020-01-13 22:13:39 -05:00
18957786f2
inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert
2020-01-13 22:00:42 -05:00
c735289ddf
Added Dxx names to analog pins on Feather M4 Express pins.c file
2020-01-13 21:19:17 -05:00
2a75196aa3
merge from adafruit/circuitpython
2020-01-13 18:15:32 -05:00
189f2d5f07
Make requiring I2C pullups be optional
2020-01-09 17:31:50 -05:00
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes
...
Fixes for JEplayer
2020-01-08 12:50:13 -08:00
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2
...
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
2020-01-07 12:08:59 -08:00
59ded1131f
Take display offsets for PewPew M4 from the bootloader config
...
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
2020-01-06 14:24:30 +01:00
3ad3d49959
changes only for monster m4sk
2020-01-04 12:32:49 -05:00
242d572470
wip
2020-01-03 10:24:07 -05:00
bd8650d35b
samd/peripherals: take upstream update
2020-01-02 17:55:50 -06:00
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update
...
Update the PewPew M4 board and circuitpython-stage
2020-01-01 13:59:02 -05:00
0223589e6c
Fix default UART too
2019-12-30 11:34:51 -08:00
e1d026f815
Update pins.c
2019-12-30 11:33:04 -08:00
62c4028cde
sync with https://github.com/hathach/tinyusb/pull/246
...
should fix slow enumeration
2019-12-26 23:04:16 +07:00
5aa3e3eabb
samd/peripherals: update
2019-12-24 09:36:19 -06:00
b06057395b
Update PewPew M4
...
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
2019-12-23 18:37:36 +01:00
f60b6481e0
Turn off `gamepad` on cpx crickit
2019-12-20 12:14:27 -08:00
b859e2b710
Remove `re` from CPX Displayio build to make space.
2019-12-20 11:43:56 -08:00
d31a387ace
circuitplayground_express_displayio: reduce inlining to make .ko translation fit
2019-12-19 16:11:29 -06:00
16688180c6
add-ndbit6
2019-12-19 07:17:43 -07:00
81581b345c
Increase CPX stack size slightly
2019-12-16 17:25:22 -05:00
89ed64157d
Merge branch 'master' into master
2019-12-16 13:25:44 +05:00
87dc9bee8b
Update mpconfigboard.mk
2019-12-16 12:25:51 +05:00
6f6d6c01ab
Update mpconfigboard.mk
2019-12-16 12:18:16 +05:00
e11fabd5e0
moved nrf internal filesystem to just below bootloader
2019-12-12 14:57:23 -05:00
ae64a669dd
address review comments
2019-12-11 15:43:06 -05:00
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
a08d9e6d8e
audiocore: Add MP3File using Adafruit_MP3 library
2019-12-10 14:03:06 -06:00
1905d0746d
samd: neopixel: Fix neopixels after #2297
...
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.
This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)
Testing performed on a Metro M4:
* measured timings using o'scope and found all values within
datasheet tolerance.
* Drove a string of 96 neopixels without visible glitches
* on-board neopixel worked
Testing performed on a Circuit Playground Express (M0):
* Color wheel code works on built-in neopixels
* Color wheel code works on 96 neopixel strip
As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)
Closes : #2297
2019-12-07 19:19:45 -06:00
d628d2a261
atmel-samd working
2019-12-06 15:18:20 -05:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
fce81e6868
Merge pull request #2297 from jepler/tick-refactor
...
Call background tasks only once per ms
2019-12-02 16:45:51 -08:00
002f5c0f1c
samd: trinket_m0: make board fit again
2019-12-02 08:25:48 -06:00
899202aca7
Merge branch 'master' into gcc9
2019-12-02 07:27:03 -06:00
95d9c49e43
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-29 11:27:09 -06:00
d843156a5e
samd: Consolidate small build optimization flags
...
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
2019-11-29 10:51:16 -06:00
dd6dfeb30a
Squeeze pyruler zh_Latn_pinyin
2019-11-27 14:47:35 -05:00
b32a9192df
make UART.write be blocking on SAMD; add timeout property
2019-11-27 13:05:29 -05:00
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master
...
Add shIRtty board
2019-11-26 15:23:56 -05:00
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name
...
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 15:17:14 -05:00
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 10:59:12 -08:00
2647ea0754
fix: disable touchio to save some space
2019-11-26 19:26:18 +01:00
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space
...
Once we use PixelBuf, the library will be much smaller.
2019-11-26 09:31:44 -08:00
82f55dc046
atmel-samd: reduce inlining on constrained boards again
...
pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0
now has just 76 bytes flash available.
2019-11-26 08:50:55 -06:00
3ed6de7baf
atmel-samd: reduce inlining on pyruler again
...
By tweaking the optimizer flags further, this build also fits
2019-11-26 08:50:55 -06:00
2e4a6b94e7
atmel-samd: get most constrained m0 builds to work again
...
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
2019-11-26 08:50:45 -06:00
11dc572bce
feature: our own PID - thanks @ladyada
2019-11-25 21:56:42 +01:00
fc71ed9789
add shirtty board - hackaday supercon 2019 addon
2019-11-25 17:44:41 +01:00
1ccb7b4c5e
cosmetic commit, mostly to re-run
2019-11-22 16:30:10 -05:00
13375d16f1
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk
2019-11-22 15:44:51 -05:00
77b78d7fb9
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-22 14:28:51 -06:00
e18d3e0f76
Merge branch 'master' into m4-network-ps2io
2019-11-22 15:02:52 -05:00
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
40a47d41df
samd: background: Allow monitoring time taken in background task
...
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
2019-11-18 11:01:24 -06:00
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
81223c76bd
revert error
2019-11-15 13:04:25 -05:00
2c6781f74d
move neopixel_in_use flag to shared-bindings
2019-11-15 12:59:52 -05:00
de5691acf5
Add never_reset and reset to pin common hal, adjust files
2019-11-15 12:47:00 -05:00
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
c7195c4bc5
Allow boards to enable the `micropython.native` decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c
...
nrf: allocate two I2C on CPB
2019-11-03 13:15:36 -08:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
1505da784f
wip
2019-10-28 18:15:02 -04:00
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
7aefcc449a
Add an alternative way to number the USB endpoints
...
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
2019-10-07 12:31:42 +02:00
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
b7598f7058
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-09-19 14:20:28 -07:00
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51
2019-09-19 12:21:54 -07:00
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
dffedd7c86
samd: peripherals: update submodule reference
2019-09-16 21:48:31 -05:00
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
61698eb5d8
AnalogOut / AudioOut: Copy settings from Arduino
...
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.
Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).
A fresh clock (6) is allocated for the new 12MHz clock. This matches
the Arduino value, though not the GCLK index.
Modify other settings to more closely resemble Arduino.
In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.
This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic
Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
2019-09-15 11:30:49 -05:00
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
b8200d7295
fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use
2019-09-09 23:17:52 -04:00
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking
...
Samd dma tracking
2019-09-05 11:27:59 -07:00
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4
...
Add support for PewPew M4 board
2019-09-05 11:26:47 -07:00
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
f3af2a6fb7
Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac
2019-09-04 21:56:13 -04:00
195de97c67
use only one endpoint pair for MSC except on SAMD21
2019-09-04 21:45:16 -04:00
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden
...
Add .hidden to TileGrid and Group
2019-09-04 15:48:00 -04:00
7951646b9a
Disable bitbangio on uGame10
2019-09-04 11:49:47 -07:00
c4d6f4f536
disable 'audiomixer' for all M0 boards
2019-09-01 17:39:20 -05:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
30a9346373
samd: audio_dma: Track channel allocation
...
Previously, we depended on allocated channels to always be
"dma_channel_enabled". However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.
((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)
Therefore,
* Add audio_dma_{allocate,free}_channel.
* audio_dma_free_channel implies audio_dma_disable_channel
* track via a new array audio_dma_allocated[]
* clear all allocated flags on soft-reboot
* Convert find_free_audio_dma_channel to audio_dma_allocate_channel
* use audio_dma_allocated[] instead of dma_channel_enabled() to check
availability
* remove find_free_audio_dma_channel
* For each one, find a matching audio_dma_disable_channel to convert
to audio_dma_free_channel
Closes : #2058
2019-08-28 17:00:22 -05:00
0b00787b4d
samd: AudioOut: ensure stopped before deinit
...
.. otherwise, a sequence like
>>> a = audioio.AudioOut(board.A0)
>>> a.play(sample, loop=True)
>>> a.deinit()
would potentially leave related DMA channel(s) active.
2019-08-28 16:43:55 -05:00
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
696117b048
disable audiomixer on boards it doesn't fit on
2019-08-25 14:53:34 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
70680d5b22
EPaper displays work mostly.
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area
...
To displayio.Display: expose fill_area and add a property for rotation
2019-08-21 23:48:21 -07:00
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
6e3a6d0ac5
typo in IncrementalEncoder.c
2019-08-20 16:23:17 -04:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano
...
Add PyPortal Titano
2019-08-12 16:01:10 -07:00
d9ee2d28a0
atmel-samd: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
33b949abfa
samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines
...
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background(). This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
2019-08-07 21:29:24 -05:00
500d1bb168
samd: audio_dma.c: Remove exceptions, just return early
...
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
2019-08-07 20:20:36 -05:00
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
39c64bf83c
samd: audio_dma_stop: don't free invalid channel
...
audio_dma_stop can be reached twice in normal usage of AudioOut.
This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number. This also prevents
the event channel from being disabled twice.
The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
2019-08-06 22:00:31 -05:00
8b717955ba
samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking
...
It turns out the "disable" error will fire in practice, we'll fix that
next.
2019-08-06 22:00:31 -05:00
6253f11503
samd: audio_dma_stop: Clear out audio_dma_state[]
...
As identified in #1908 , when both AudioOut and PDMIn are used, hard
locks can occur. Because audio_dma_stop didn't clear audio_dma_state[],
a future call to audio_dma_load_next_block could occur using a DMA
object which belongs to PDMIn.
I believe that this Closes : #1908 though perhaps it is still not the full
story.
Testing performed: Loaded a sketch similar to the one on #1908 that
tends to reproduce the bug within ~30s. Ran for >300s without hard
lock. HOWEVER, while my cpx is no longer hard locking, it occasionally
(<1 / 200s) announces
Code done running. Waiting for reload.
(and does so), even though my main loop is surrounded by a 'while True:'
condition, so there are still gremlins nearby.
2019-08-06 21:34:21 -05:00
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
6b44e40ee8
audiocore: Factor from audioio
...
When nrf pwm audio is introduced, it will be called `audiopwmio`. To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.
INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
2019-07-25 06:44:26 -05:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1
...
Update Arch Linux ARM compiler installation instructions
2019-07-22 19:29:53 -07:00
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.
2019-07-19 16:10:32 -07:00
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
ansonhe97
Scott Shawcroft
Radomir Dopieralski
Jeff Epler
ndgarage
svgops
Dan Halbert
Jeff Epler
Scott Shawcroft
Jeff Epler
Florin Trutiu
Diego Elio Pettenò
Dan Halbert
hathach
DavePutz
jason
Mark Olsson
warriorofwire
Daniel Pollard
Max Holliday
Lucian Copeland
Sabas
sabas1080
Brian Dean
Thea Flowers
siddacious
Chris Burton
Szymon Klause
Florent Gallaire
Dave Marples
Limor "Ladyada" Fried
neubauek
James Bowman
Chris Osterwood
dalegrover
Joey Castillo
scs217
Marius-450
KalbeAbbas
Thomas Sarlandie
wallarug
Cedar Grove Maker Studios
KalbeAbbas
☒ Bjarke Gotfredsen
brentru
Thea Flowers
ProductDev
Kamil Tomaszewski
arturo182
Melissa LeBlanc-Williams
Kattni Rembor
sommersoft
Dave Astels
Keith Packard
sommersoft
Carl Elkins
jandjstudios
iot49
Anthony DiGirolamo
shazz
Elvis Pfützenreuter
sabas1080
ladyada
Carlos
ITACA Innovation S.R.L
siddacious
Melissa LeBlanc-Williams
Justin R. Cutler
John Reese
caternuson
TG-Techie
Elias Santistevan
ShawnHymel
Roy Hooper
TG-Techie
Benjamin Shockley
Noralf Trønnes
ATMakersBill