Commit Graph

10073 Commits

Author SHA1 Message Date
Damien George
28c2873d99 docs/esp32: Add a note to quickref about use of Pin.PULL_HOLD. 2019-03-14 07:38:50 +11:00
Damien George
6fa830bfd8 docs/library/machine.Pin: Add PULL_HOLD constant to possible pin pulls.
As already mentioned in the docs, not all constants may be available on all
ports, so this is optional to implement.
2019-03-14 07:29:04 +11:00
Damien George
ddc934631c esp32/machine_pin: Add new PULL_HOLD pin pull mode. 2019-03-14 07:28:57 +11:00
Damien George
349b54525e esp32/machine_pin: Make it so None as pull value disables pull up/down.
Previously specifying None as the pull value would leave the pull up/down
state unchanged.  This change makes it so -1 leaves the state unchanged and
None makes the pin float, as per the docs.
2019-03-14 07:26:59 +11:00
Wolf Vollprecht
ea2fcdd338 javascript: Fix Emscripten async load, and to compile with modern clang. 2019-03-13 23:52:15 +11:00
Rami Ali
7d675f3a17 javascript: Add new port targeting JavaScript via Emscripten.
In this port JavaScript is the underlying "machine" and MicroPython is
transmuted into JavaScript by Emscripten.  MicroPython can then run under
Node.js or in the browser.
2019-03-13 23:47:32 +11:00
Wolf Vollprecht
921b999225 extmod/moduselect: Adjust select_select and poll_register to use size_t. 2019-03-13 23:18:59 +11:00
Martin Fischer
912e957512 docs/develop: Fix typos in C-module example for example_add_ints. 2019-03-13 12:54:01 +11:00
johnthagen
ea95bdc1ca docs/pyboard: Make pyboard v1.1 pinout the default shown in quickref. 2019-03-13 12:37:35 +11:00
johnthagen
d390ad9053 docs/pyboard: Add link to pyboard v1.1 schematic and layout PDF. 2019-03-13 12:33:02 +11:00
Damien George
68a5d6fe77 extmod/modlwip: Fix case where concurrency lock isn't released on error. 2019-03-12 22:35:52 +11:00
Maureen Helm
493ee7df18 zephyr/prj_frdm_kw41z.conf: Add new board configuration.
Adds a new board configuration for the frdm_kw41z board, including support
for the fxos8700 accelerometer/magnetometer/die temperature sensor.
2019-03-12 17:12:13 +11:00
Maureen Helm
7748375b6e zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor.
Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the
frdm_k64f board configuration.
2019-03-12 17:12:00 +11:00
Paul Sokolovsky
6d82499a48 zephyr/Makefile: Proxy ram_report, rom_report targets from Zephyr. 2019-03-12 17:11:52 +11:00
Paul Sokolovsky
755b0b807b zephyr/prj_minimal.conf: Switch to CONFIG_STDOUT_CONSOLE.
Prompted by code size analysis, after arduino_101 build overflowing ROM.
2019-03-12 17:11:46 +11:00
Paul Sokolovsky
21fc0c448e zephyr/modzsensor: Rename "TEMP" sensor channel to "DIE_TEMP".
I.e. on-die temperature sensor.  Upstream made more fine-grained channels
for different kinds of temperature.
2019-03-12 17:11:30 +11:00
Paul Sokolovsky
a42c1d9fd5 zephyr/modzephyr: Revamp stacks_analyze() call.
Underlying k_call_stacks_analyze() was gone in Zephyr, reimplement using
k_thread_foreach().
2019-03-12 17:11:09 +11:00
Damien George
297092a76a esp32/mphalport: Use ets_delay_us for mp_hal_delay_us_fast.
The system provided one is in ROM and is more accurate.
2019-03-12 15:46:44 +11:00
Damien George
fcace26d87 esp32/Makefile: Add some missing IDF source files to bootloader and app.
Functions in these files may be needed when certain features are enabled
(eg dual core mode), even if the linker does not give a warning or error
about unresolved symbols.
2019-03-11 23:17:09 +11:00
Petr Kracík
41e7ad647e esp32/modnetwork: Remove redundant esp_log include. 2019-03-08 23:36:07 +11:00
Petr Kracík
73c48b1b45 esp32/modnetwork: Implement RSSI for WiFi STA via WLAN.status('rssi'). 2019-03-08 23:35:28 +11:00
Andrew Leech
5688c9ba09 stm32/usb: Allow to override USB strings & VID/PID in app and mboot.
The override #define's should go in the board's mpconfigboard.h file.
2019-03-08 23:29:15 +11:00
Andrew Leech
0c60cb1fc4 stm32/qspi: Set pin speed to very-high and allow to config some options.
The default speed of the QSPI interface is 72Mhz whereas the standard AF
pin speed (high) is only rated to 50Mhz, so increase speed to very-high.
2019-03-08 23:17:50 +11:00
Andrew Leech
2ed2ec1711 drivers/memory/spiflash: Rework wait_sr to fix uninit'd variable 'sr'. 2019-03-08 23:11:13 +11:00
Andrew Leech
89ff506513 py: Update and rework build system for including external C modules.
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
Ayke van Laethem
2e516074da py: Implement a module system for external, user C modules.
This system makes it a lot easier to include external libraries as static,
native modules in MicroPython.  Simply pass USER_C_MODULES (like
FROZEN_MPY_DIR) as a make parameter.
2019-03-08 22:49:00 +11:00
Andrew Leech
cf22f4793c py: Allow registration of modules at their definition.
During make, makemoduledefs.py parses the current builds c files for
MP_REGISTER_MODULE(module_name, obj_module, enabled_define)

These are used to generate a header with the required entries for
"mp_rom_map_elem_t mp_builtin_module_table[]" in py/objmodule.c
2019-03-08 22:46:43 +11:00
Damien George
e4ac104b7f stm32: Allow to build with threading with the GIL disabled. 2019-03-08 22:29:54 +11:00
Damien George
1e23a29c8a tests/import: Add test for importing x64 native code. 2019-03-08 17:20:17 +11:00
Damien George
c6a9bb23cd unix/Makefile: Update coverage tests to match those in Travis. 2019-03-08 16:51:09 +11:00
Damien George
6e11d86318 tools/upip.py: Use "raise arg" instead of no-arg raise form, for native. 2019-03-08 16:51:09 +11:00
Damien George
2bcb240b55 travis: Enable test for running native code via mpy. 2019-03-08 16:51:09 +11:00
Damien George
69955238a2 tests/run-tests: Support running native tests via mpy. 2019-03-08 16:51:09 +11:00
Damien George
31d2d83e79 mpy-cross: Enable building of x64 native .mpy files. 2019-03-08 16:51:04 +11:00
Damien George
7852b287df minimal/frozentest: Recompile now that mpy format and version changed. 2019-03-08 15:53:05 +11:00
Damien George
9a5f92ea72 py/persistentcode: Bump .mpy version to 4. 2019-03-08 15:53:05 +11:00
Damien George
ea3c80a514 tools/mpy-tool.py: Add support for freezing native code.
This adds support to freeze .mpy files that contain native code blocks.
2019-03-08 15:53:05 +11:00
Damien George
1396a026be py: Add support to save native, viper and asm code to .mpy files.
This commit adds support for saving and loading .mpy files that contain
native code (native, viper and inline-asm).  A lot of the ground work was
already done for this in the form of removing pointers from generated
native code.  The changes here are mainly to link in qstr values to the
native code, and change the format of .mpy files to contain native code
blocks (possibly mixed with bytecode).

A top-level summary:

- @micropython.native, @micropython.viper and @micropython.asm_thumb/
  asm_xtensa are now allowed in .py files when compiling to .mpy, and they
  work transparently to the user.

- Entire .py files can be compiled to native via mpy-cross -X emit=native
  and for the most part the generated .mpy files should work the same as
  their bytecode version.

- The .mpy file format is changed to 1) specify in the header if the file
  contains native code and if so the architecture (eg x86, ARMV7M, Xtensa);
  2) for each function block the kind of code is specified (bytecode,
  native, viper, asm).

- When native code is loaded from a .mpy file the native code must be
  modified (in place) to link qstr values in, just like bytecode (see
  py/persistentcode.c:arch_link_qstr() function).

In addition, this now defines a public, native ABI for dynamically loadable
native code generated by other languages, like C.
2019-03-08 15:53:05 +11:00
Damien George
636ed0ff8d py/emitglue: Remove union in mp_raw_code_t to combine bytecode & native. 2019-03-08 15:53:04 +11:00
Damien George
3986820912 py/emitnative: Adjust accounting of size of const_table.
n_obj no longer includes a count for mp_fun_table to make it a bit simpler.
2019-03-08 15:53:04 +11:00
Damien George
205edb4305 py/emitnative: Provide concentrated points of qstr emit. 2019-03-08 15:53:04 +11:00
Damien George
01a1f31f67 py/emitnative: Consolidate where HASCONSTS is set to load-const-obj fun.
Simplifies the code and fixes handling of the Ellipsis const in native code
generation (which also needs the constant table so must set this flag).
2019-03-08 15:53:04 +11:00
Damien George
02cc288edb py: Add independent config for debugging sentinel object values.
The new compile-time option is MICROPY_DEBUG_MP_OBJ_SENTINELS, disabled by
default.  This is to allow finer control of whether this debugging feature
is enabled or not (because, for example, this setting must be the same for
mpy-cross and the MicroPython main code when using native code generation).
2019-03-08 15:53:04 +11:00
Jim Mussared
f2ebee9cf1 stm32/mboot: Update to match latest oofatfs version.
See corresponding commit b5f33ac2cb
2019-03-07 15:22:16 +11:00
Damien George
350dbb89e6 lib/oofatfs: Update oofatfs library to fix issue with logic not.
From https://github.com/micropython/oofatfs, branch work-R0.13c,
commit 3b4ee5a646af2769b3dddfe17d5d866233c1e45b.
2019-03-07 15:03:09 +11:00
Damien George
62483bb957 minimal/frozentest: Recompile now that mpy format changed. 2019-03-05 16:32:05 +11:00
Damien George
4f0931b21f py/persistentcode: Define static qstr set to reduce size of mpy files.
When encoded in the mpy file, if qstr <= QSTR_LAST_STATIC then store two
bytes: 0, static_qstr_id.  Otherwise encode the qstr as usual (either with
string data or a reference into the qstr window).

Reduces mpy file size by about 5%.
2019-03-05 16:32:05 +11:00
Damien George
992a6e1dea py/persistentcode: Pack qstrs directly in bytecode to reduce mpy size.
Instead of emitting two bytes in the bytecode for where the linked qstr
should be written to, it is now replaced by the actual qstr data, or a
reference into the qstr window.

Reduces mpy file size by about 10%.
2019-03-05 16:27:34 +11:00
Damien George
5996eeb48f py/persistentcode: Add a qstr window to save mpy files more efficiently.
This is an implementation of a sliding qstr window used to reduce the
number of qstrs stored in a .mpy file.  The window size is configured to 32
entries which takes a fixed 64 bytes (16-bits each) on the C stack when
loading/saving a .mpy file.  It allows to remember the most recent 32 qstrs
so they don't need to be stored again in the .mpy file.  The qstr window
uses a simple least-recently-used mechanism to discard the least recently
used qstr when the window overflows (similar to dictionary compression).
This scheme only needs a single pass to save/load the .mpy file.

Reduces mpy file size by about 25% with a window size of 32.
2019-03-05 16:25:07 +11:00
Damien George
5a2599d962 py: Replace POP_BLOCK and POP_EXCEPT opcodes with POP_EXCEPT_JUMP.
POP_BLOCK and POP_EXCEPT are now the same, and are always followed by a
JUMP.  So this optimisation reduces code size, and RAM usage of bytecode by
two bytes for each try-except handler.
2019-03-05 16:09:58 +11:00