buffer from start, end and length. The old code miscomputed length
leading to writing and reading from memory past the end of the buffer.
Consolidating the code should make it easier to get right everywhere.
The patch enables the possibility to disable or initialize the repl
info from outside of the module. Can also be used to initialize the
repl_display_debugging_info in pyexec.c if not startup file is clearing
.bss segment.
Ports should no longer use pyhelp_print_obj but instead should define
MICROPY_PY_BUILTINS_HELP to 1 and then specify their help text using
MICROPY_PY_BUILTINS_HELP_TEXT.
Support for Xtensa emitter and assembler, and upgraded F4 and F7 STM HAL
This release adds support for the Xtensa architecture as a target for the
native emitter, as well as Xtensa inline assembler. The int.from_bytes
and int.to_bytes methods now require a second argument (the byte order)
per CPython (only "little" is supported at this time). The "readall"
method has been removed from all stream classes that used it; "read" with
no arguments should be used instead. There is now support for importing
packages from compiled .mpy files. Test coverage is increased to 96%.
The generic I2C driver has improvements: configurable clock stretching
timeout, "stop" argument added to readfrom/writeto methods, "nack"
argument added to readinto, and write[to] now returns num of ACKs
received. The framebuf module now handles 16-bit depth (generic colour
format) and has hline, vline, rect, line methods. A new utimeq module is
added for efficient queue ordering defined by modulo time (to be
compatible with time.ticks_xxx functions). The pyboard.py script has been
modified so that the target board is not reset between scripts or commands
that are given on a single command line.
For the stmhal port the STM Cube HAL has been upgraded: Cube F4 HAL to
v1.13.1 (CMSIS 2.5.1, HAL v1.5.2) and Cube F7 HAL to v1.1.2. There is a
more robust pyb.I2C implementation (DMA is now disabled by default, can be
enabled via an option), and there is an implementation of machine.I2C with
robust error handling and hardware acceleration on F4 MCUs. It is now
recommended to use machine.I2C instead of pyb.I2C. The UART class is now
more robust with better handling of errors/timeouts. There is also more
accurate VBAT and VREFINT measurements for the ADC. New boards that are
supported include: NUCLEO_F767ZI, STM32F769DISC and NUCLEO_L476RG.
For the esp8266 port select/poll is now supported for sockets using the
uselect module. There is support for native and viper emitters, as well
as an inline assembler (with limited iRAM for storage of native functions,
or the option to store code to flash). There is improved software I2C
with a slight API change: scl/sda pins can be specified as positional only
when "-1" is passed as the first argument to indicate the use of software
I2C. It is recommended to use keyword arguments for scl/sda. There is
very early support for over-the-air (OTA) updates using the yaota8266
project.
A detailed list of changes follows.
py core:
- emitnative: fix native import emitter when in viper mode
- remove readall() method, which is equivalent to read() w/o args
- objexcept: allow clearing traceback with 'exc.__traceback__ = None'
- runtime: mp_resume: handle exceptions in Python __next__()
- mkrules.mk: rework find command so it works on OSX
- *.mk: replace uses of 'sed' with $(SED)
- parse: move function to check for const parse node to parse.[ch]
- parse: make mp_parse_node_new_leaf an inline function
- parse: add code to fold logical constants in or/and/not operations
- factor persistent code load/save funcs into persistentcode.[ch]
- factor out persistent-code reader into separate files
- lexer: rewrite mp_lexer_new_from_str_len in terms of mp_reader_mem
- lexer: provide generic mp_lexer_new_from_file based on mp_reader
- lexer: rewrite mp_lexer_new_from_fd in terms of mp_reader
- lexer: make lexer use an mp_reader as its source
- objtype: implement __call__ handling for an instance w/o heap alloc
- factor out common code from assemblers into asmbase.[ch]
- stream: move ad-hoc ioctl constants to stream.h and rename them
- compile: simplify configuration of native emitter
- emit.h: remove long-obsolete declarations for cpython emitter
- move arch-specific assembler macros from emitnative to asmXXX.h
- asmbase: add MP_PLAT_COMMIT_EXEC option for handling exec code
- asmxtensa: add low-level Xtensa assembler
- integrate Xtensa assembler into native emitter
- allow inline-assembler emitter to be generic
- add inline Xtensa assembler
- emitinline: embed entire asm struct instead of a pointer to it
- emitinline: move inline-asm align and data methods to compiler
- emitinline: move common code for end of final pass to compiler
- asm: remove need for dummy_data when doing initial assembler passes
- objint: from_bytes, to_bytes: require byteorder arg, require "little"
- binary: do zero extension when storing a value larger than word size
- builtinimport: support importing packages from compiled .mpy files
- mpz: remove unreachable code in mpn_or_neg functions
- runtime: zero out fs_user_mount array in mp_init
- mpconfig.h: enable MICROPY_PY_SYS_EXIT by default
- add MICROPY_KBD_EXCEPTION config option to provide mp_kbd_exception
- compile: add an extra pass for Xtensa inline assembler
- modbuiltins: remove unreachable code
- objint: rename mp_obj_int_as_float to mp_obj_int_as_float_impl
- emitglue: refactor to remove assert(0), to improve coverage
- lexer: remove unreachable code in string tokeniser
- lexer: remove unnecessary check for EOF in lexer's next_char func
- lexer: permanently disable the mp_lexer_show_token function
- parsenum: simplify and generalise decoding of digit values
- mpz: fix assertion in mpz_set_from_str which checks value of base
- mpprint: add assertion for, and comment about, valid base values
- objint: simplify mp_int_format_size and remove unreachable code
- unicode: comment-out unused function unichar_isprint
- consistently update signatures of .make_new and .call methods
- mkrules.mk: add MPY_CROSS_FLAGS option to pass flags to mpy-cross
- builtinimport: fix bug when importing names from frozen packages
extmod:
- machine_i2c: make the clock stretching timeout configurable
- machine_i2c: raise an error when clock stretching times out
- machine_i2c: release SDA on bus error
- machine_i2c: add a C-level I2C-protocol, refactoring soft I2C
- machine_i2c: add argument to C funcs to control stop generation
- machine_i2c: rewrite i2c.scan in terms of C-level protocol
- machine_i2c: rewrite mem xfer funcs in terms of C-level protocol
- machine_i2c: remove unneeded i2c_write_mem/i2c_read_mem funcs
- machine_i2c: make C-level functions return -errno on I2C error
- machine_i2c: add 'nack' argument to i2c.readinto
- machine_i2c: make i2c.write[to] methods return num of ACKs recvd
- machine_i2c: add 'stop' argument to i2c readfrom/writeto meths
- machine_i2c: remove trivial function wrappers
- machine_i2c: expose soft I2C obj and readfrom/writeto funcs
- machine_i2c: add hook to constructor to call port-specific code
- modurandom: allow to build with float disabled
- modframebuf: make FrameBuffer handle 16bit depth
- modframebuf: add back legacy FrameBuffer1 "class"
- modframebuf: optimise fill and fill_rect methods
- vfs_fat: implement POSIX behaviour of rename, allow to overwrite
- moduselect: use stream helper function instead of ad-hoc code
- moduselect: use configurable EVENT_POLL_HOOK instead of WFI
- modlwip: add ioctl method to socket, with poll implementation
- vfs_fat_file: allow file obj to respond to ioctl flush request
- modbtree: add method to sync the database
- modbtree: rename "sync" method to "flush" for consistency
- modframebuf: add hline, vline, rect and line methods
- machine_spi: provide reusable software SPI class
- modframebuf: make framebuf implement the buffer protocol
- modframebuf: store underlying buffer object to prevent GC free
- modutimeq: copy of current moduheapq with timeq support for refactoring
- modutimeq: refactor into optimized class
- modutimeq: make time_less_than be actually "less than", not less/eq
lib:
- utils/interrupt_char: use core-provided mp_kbd_exception if enabled
drivers:
- display/ssd1306.py: update to use FrameBuffer not FrameBuffer1
- onewire: enable pull up on data pin
- onewire/ds18x20: fix negative temperature calc for DS18B20
tools:
- tinytest-codegen: blacklist recently added uheapq_timeq test (qemu-arm)
- pyboard.py: refactor so target is not reset between scripts/cmd
- mpy-tool.py: add support for OPT_CACHE_MAP_LOOKUP_IN_BYTECODE
tests:
- micropython: add test for import from within viper function
- use read() instead of readall()
- basics: add test for logical constant folding
- micropython: add test for creating traceback without allocation
- micropython: move alloc-less traceback test to separate test file
- extmod: improve ujson coverage
- basics: improve user class coverage
- basics: add test for dict.fromkeys where arg is a generator
- basics: add tests for if-expressions
- basics: change dict_fromkeys test so it doesn't use generators
- basics: enable tests for list slice getting with 3rd arg
- extmod/vfs_fat_fileio: add test for constructor of FileIO type
- extmod/btree1: exercise btree.flush()
- extmod/framebuf1: add basics tests for hline, vline, rect, line
- update for required byteorder arg for int.from_bytes()/to_bytes()
- extmod: improve moductypes test coverage
- extmod: improve modframebuf test coverage
- micropython: get heapalloc_traceback test running on baremetal
- struct*: make skippable
- basics: improve mpz test coverage
- float/builtin_float_round: test round() with second arg
- basics/builtin_dir: add test for dir() of a type
- basics: add test for builtin locals()
- basics/set_pop: improve coverage of set functions
- run-tests: for REPL tests make sure the REPL is exited at the end
- basics: improve test coverage for generators
- import: add a test which uses ... in from-import statement
- add tests to improve coverage of runtime.c
- add tests to improve coverage of objarray.c
- extmod: add test for utimeq module
- basics/lexer: add a test for newline-escaping within a string
- add a coverage test for printing the parse-tree
- utimeq_stable: test for partial stability of utimeq queuing
- heapalloc_inst_call: test for no alloc for simple object calls
- basics: add tests for parsing of ints with base 36
- basics: add tests to improve coverage of binary.c
- micropython: add test for micropython.stack_use() function
- extmod: improve ubinascii.c test coverage
- thread: improve modthread.c test coverage
- cmdline: improve repl.c autocomplete test coverage
- unix: improve runtime_utils.c test coverage
- pyb/uart: update test to match recent change to UART timeout_char
- run-tests: allow to skip set tests
- improve warning.c test coverage
- float: improve formatfloat.c test coverage using Python
- unix: improve formatfloat.c test coverage using C
- unix/extra_coverage: add basic tests to import frozen str and mpy
- types1: split out set type test to set_types
- array: allow to skip test if "array" is unavailable
- unix/extra_coverage: add tests for importing frozen packages
unix port:
- rename define for unix moduselect to MICROPY_PY_USELECT_POSIX
- Makefile: update freedos target for change of USELECT config name
- enable utimeq module
- main: allow to print the parse tree in coverage build
- Makefile: make "coverage_test" target mirror Travis test actions
- moduselect: if file object passed to .register(), return it in .poll()
- Makefile: split long line for coverage target, easier to modify
- enable and add basic frozen str and frozen mpy in coverage build
- Makefile: allow cache-map-lookup optimisation with frozen bytecode
windows port:
- enable READER_POSIX to get access to lexer_new_from_file
stmhal port:
- dma: de-init the DMA peripheral properly before initialising
- i2c: add option to I2C to enable/disable use of DMA transfers
- i2c: reset the I2C peripheral if there was an error on the bus
- rename mp_hal_pin_set_af to _config_alt, to simplify alt config
- upgrade to STM32CubeF4 v1.13.0 - CMSIS/Device 2.5.1
- upgrade to STM32CubeF4 v1.13.0 - HAL v1.5.1
- apply STM32CubeF4 v1.13.1 patch - upgrade HAL driver to v1.5.2
- hal/i2c: reapply HAL commit ea040a4 for f4
- hal/sd: reapply HAL commit 1d7fb82 for f4
- hal: reapply HAL commit 9db719b for f4
- hal/rcc: reapply HAL commit c568a2b for f4
- hal/sd: reapply HAL commit 09de030 for f4
- boards: configure all F4 boards to work with new HAL
- make-stmconst.py: fix regex's to work with current CMSIS
- i2c: handle I2C IRQs
- dma: precalculate register base and bitshift on handle init
- dma: mark DMA sate as READY even if HAL_DMA_Init is skipped
- can: clear FIFO flags in IRQ handler
- i2c: provide custom IRQ handlers
- hal: do not include <stdio.h> in HAL headers
- mphalport.h: use single GPIOx->BSRR register
- make-stmconst.py: add support for files with invalid utf8 bytes
- update HALCOMMITS due to change to hal
- make-stmconst.py: restore Python 2 compatibility
- update HALCOMMITS due to change to hal
- moduselect: move to extmod/ for reuse by other ports
- i2c: use the HAL's I2C IRQ handler for F7 and L4 MCUs
- updates to get F411 MCUs compiling with latest ST HAL
- i2c: remove use of legacy I2C_NOSTRETCH_DISABLED option
- add beginnings of port-specific machine.I2C implementation
- i2c: add support for I2C4 hardware block on F7 MCUs
- i2c: expose the pyb_i2c_obj_t struct and some relevant functions
- machine_i2c: provide HW implementation of I2C peripherals for F4
- add support for flash storage on STM32F415
- add back GPIO_BSRRL and GPIO_BSRRH constants to stm module
- add OpenOCD configuration for STM32L4
- add address parameters to openocd config files
- adc: add "mask" selection parameter to pyb.ADCAll constructor
- adc: provide more accurate measure of VBAT and VREFINT
- adc: make ADCAll.read_core_temp return accurate float value
- adc: add ADCAll.read_vref method, returning "3.3v" value
- adc: add support for F767 MCU
- adc: make channel "16" always map to the temperature sensor
- sdcard: clean/invalidate cache before DMA transfers with SD card
- moduos: implement POSIX behaviour of rename, allow to overwrite
- adc: use constants from new HAL version
- refactor UART configuration to use pin objects
- uart: add support for UART7 and UART8 on F7 MCUs
- uart: add check that UART id is valid for the given board
- cmsis: update STM32F7 CMSIS device include files to V1.1.2
- hal: update ST32CubeF7 HAL files to V1.1.2
- port of f4 hal commit c568a2b to updated f7 hal
- port of f4 hal commit 09de030 to updated f7 hal
- port of f4 hal commit 1d7fb82 to updated f7 hal
- declare and initialise PrescTables for F7 MCUs
- boards/STM32F7DISC: define LSE_STARTUP_TIMEOUT
- hal: update HALCOMMITS due to change in f7 hal files
- refactor to use extmod implementation of software SPI class
- cmsis: add CMSIS file stm32f767xx.h, V1.1.2
- add NUCLEO_F767ZI board, with openocd config for stm32f7
- cmsis: add CMSIS file stm32f769xx.h, V1.1.2
- add STM32F769DISC board files
- move PY_SYS_PLATFORM config from board to general config file
- mpconfigport: add weak-module links for io, collections, random
- rename mp_const_vcp_interrupt to mp_kbd_exception
- usb: always use the mp_kbd_exception object for VCP interrupt
- use core-provided keyboard exception object
- led: properly initialise timer handle to zero before using it
- mphalport.h: explicitly use HAL's GPIO constants for pull modes
- usrsw: use mp_hal_pin_config function instead of HAL_GPIO_Init
- led: use mp_hal_pin_config function instead of HAL_GPIO_Init
- sdcard: use mp_hal_pin_config function instead of HAL_GPIO_Init
- add support for STM32 Nucleo64 L476RG
- uart: provide a custom function to transmit over UART
- uart: increase inter-character timeout by 1ms
- enable utimeq module
cc3200 port:
- tools/smoke.py: change readall() to read()
- pybspi: remove static mode=SPI.MASTER parameter for latest HW API
- mods/pybspi: remove SPI.MASTER constant, it's no longer needed
- update for moduselect moved to extmod/
- re-add support for UART REPL (MICROPY_STDIO_UART setting)
- enable UART REPL by default
- README: (re)add information about accessing REPL on serial
- make: rename "deploy" target to "deploy-ota"
- add targets to erase flash, deploy firmware using cc3200tool
- README: reorganize and update to the current state of affairs
- modwlan: add network.WLAN.print_ver() diagnostic function
esp8266 port:
- enable uselect module
- move websocket_helper.py from scripts to modules for frozen BC
- refactor to use extmod implementation of software SPI class
- mpconfigport_512k: disable framebuf module for 512k build
- enable native emitter for Xtensa arch
- enable inline Xtensa assembler
- add "ota" target to produce firmware binary for use with yaota8266
- use core-provided keyboard exception object
- add "erase" target to Makefile, to erase entire flash
- when doing GC be sure to trace the memory holding native code
- modesp: flash_user_start(): support configuration with yaota8266
- force relinking OTA firmware image if built after normal one
- scripts/inisetup: dump FS starting sector/size on error
- Makefile: produce OTA firmware as firmware-ota.bin
- modesp: make check_fw() work with OTA firmware
- enable utimeq module
- Makefile: put firmware-ota.bin in build/, for consistency
- modules/flashbdev: add RESERVED_SECS before the filesystem
- modules/flashbdev: remove code to patch bootloader flash size
- modules/flashbdev: remove now-unused function set_bl_flash_size
- modules/flashbdev: change RESERVED_SECS to 0
zephyr port:
- add .gitignore to ignore Zephyr's "outdir" directory
- zephyr_getchar: update to Zephyr 1.6 unified kernel API
- switch to Zephyr 1.6 unified kernel API
- support raw REPL
- implement soft reset feature
- main: initialize sys.path and sys.argv
- use core-provided keyboard exception object
- uart_core: access console UART directly instead of printk() hack
- enable slice subscription
docs:
- remove references to readall() and update stream read() docs
- library/index: elaborate on u-modules
- library/machine.I2C: refine definitions of I2C methods
- library/pyb.Accel: add hardware note about pins used by accel
- library/pyb.UART: added clarification about timeouts
- library/pyb.UART: moved writechar doc to sit with other writes
- esp8266/tutorial: update intro to add Getting the firmware section
- library/machine.I2C: fix I2C constructor docs to match impl
- esp8266/tutorial: close socket after reading page content
- esp8266/general: add "Scarcity of runtime resources" section
- library/esp: document esp.set_native_code_location() function
- library/esp: remove para and add further warning about flash
- usocket: clarify that socket timeout raises OSError exception
travis:
- build STM32 F7 and L4 boards under Travis CI
- include persistent bytecode with floats in coverage tests
examples:
- hwapi: button_led: Add GPIO pin read example
- hwapi: add soft_pwm example converted to uasyncio
- http_client: use read() instead of readall()
- hwapi: add uasyncio example of fading 2 LEDs in parallel
- hwapi: add example for machine.time_pulse_us()
- hwapi: add hwconfig for console tracing of LED operations
- accellog.py: change 1: to /sd/, and update comment about FS
- hwapi/hwconfig_console: don't alloc memory in value()
The new sequence is as follows:
* Solid blue during the boot/settings script.
* Solid green during the main/code script.
* After main while waiting to enter repl or reset:
* Fading green once main is done successfully.
* On error produce a series of flashes:
* Long flash color of script.
* Long flash color of error:
* Green = IndentationError
* Cyan = SyntaxError
* White = NameError
* Orange = OSError
* Yellow = Other error
* Line number of the exception by digit. Number of flashes represents value.
* Thousands = White
* Hundreds = Blue
* Tens = Yellow
* Ones = Cyan
* Off for a period and then repeats.
At any point a write to the flash storage will flicker red.
Fixes#63
ESP8266 port uses SDK 2.0, has more heap, has support for 512k devices
This release brings some code size reductions to the core as well as
more tests and improved coverage which is now at 94.3%.
The time.ticks_diff(a, b) function has changed: the order of the arguments
has been swapped so that it behaves like "a - b", and it can now return a
negative number if "a" came before "b" (modulo the period of the ticks
functions).
For the ESP8266 port the Espressif SDK has been updated to 2.0.0, the
heap has been increased from 28k to 36k, and there is support for 512k
devices via "make 512k". upip is included by default as frozen bytecode.
The network module now allows access-point reconnection without WiFi
credentials, and exposes configuration for the station DHCP hostname. The
DS18B20 driver now handles negative temperatures, and NeoPixel and APA102
drivers handle 4 bytes-per-pixel LEDs.
For the CC3200 port there is now support for loading of precompiled .mpy
files and threading now works properly with interrupts.
A detailed list of changes follows.
py core:
- py.mk: automatically add frozen.c to source list if FROZEN_DIR is defined
- be more specific with MP_DECLARE_CONST_FUN_OBJ macros
- specialise builtin funcs to use separate type for fixed arg count
- {modbuiltins,obj}: use MP_PYTHON_PRINTER where possible
- modbuiltins: add builtin "slice", pointing to existing slice type
- add "delattr" builtin, conditional on MICROPY_CPYTHON_COMPAT
- sequence: fix reverse slicing of lists
- fix null pointer dereference in mpz.c, fix missing va_end in warning.c
- remove asserts that are always true in emitbc.c
- fix wrong assumption that m_renew will not move if shrinking
- change config default so m_malloc0 uses memset if GC not enabled
- add MICROPY_FLOAT_CONST macro for defining float constants
- move frozen bytecode Makefile rules from ports to common mk files
- strip leading dirs from frozen mpy files, so any path can be used
extmod:
- vfs_fat_file: check fatfs f_sync() and f_close() returns for errors
- vfs_fat_file: make file.close() a no-op if file already closed
- utime_mphal: ticks_diff(): switch arg order, return signed value
- utime_mphal: add MP_THREAD_GIL_EXIT/ENTER warppers for sleep functions
- utime_mphal: implement ticks_add(), add to all maintained ports
- utime_mphal: allow ticks functions period be configurable by a port
lib:
- utils/pyhelp.c: use mp_printf() instead of printf()
- utils/pyexec: add mp_hal_set_interrupt_char() prototype
- libm: move Thumb-specific sqrtf function to separate file
drivers:
- add "from micropython import const" when const is used
tools:
- upgrade upip to 1.1.4: fix error on unix when installing to non-existing
absolute path
- pip-micropython: remove deprecated wrapper tool
- check_code_size.sh: code size validation script for CI
- replace upip tarball with just source file, to make its inclusion as
frozen modules in multiple ports less magic
tests:
- extmod/vfs_fat: improve VFS test coverage
- basics/builtin_slice: add test for "slice" builtin name
- basics: add test for builtin "delattr"
- extmod/vfs_fat_fsusermount: improve fsusermount test coverage
- extmod/vfs_fat_oldproto: test old block device protocol
- basics/gc1: garbage collector threshold() coverage
- extmod/uhashlib_sha1: coverage for SHA1 algorithm
- extmod/uhashlib_sha256: rename sha256.py test
- btree1: fix out of memory error running on esp8266
- extmod/ticks_diff: test for new semantics of ticks_diff()
- extmod/framebuf1: test framebuffer pixel clear, and text function
minimal port:
- Makefile: split rule for firmware.bin generation
unix port:
- Makefile: remove references to deprecated pip-micropython
- modtime: use ticks_diff() implementation from extmod/utime_mphal.c
- mphalport.h: add warning of mp_hal_delay_ms() implementation
- modtime: switch ticks/sleep_ms/us() to utime_mphal
- fix symbol references for x86 Mac
- replace upip tarball with just source file
windows port:
- enable utime_mphal following unix, define mp_hal_ticks_*
- fix utime_mphal compilation for msvc
- implement mp_hal_ticks_cpu in terms of QueryPerformanceCounter
qemu-arm port:
- exclude ticks_diff test for qemu-arm port
- exclude extmod/vfs_fat_fileio.py test
- exclude new vfs_fat tests
- enable software floating point support, and float tests
stmhal port:
- modutime: refactor to use extmod's version of ticks_cpu
- refactor pin usage to use mp_hal_pin API
- led: refactor LED to use mp_hal_pin_output() init function
- Makefile: use standard rules for frozen module generation
- modutime: consistently convert to MP_ROM_QSTR/MP_ROM_PTR
- enable SD power save (disable CLK on idle)
cc3200 port:
- use mp_raise_XXX helper functions to reduce code size
- mods/pybspi: allow "write" arg of read/readinto to be positional
- enable loading of precompiled .mpy files
- fix thread mutex's so threading works with interrupts
teensy port:
- update to provide new mp_hal_pin_XXX functions following stmhal
esp8266 port:
- Makefile: use latest esptool.py flash size auto-detection
- esp_init_data: auto-initialize system params with vendor SDK 2.0.0
- esp8266.ld: move help.o to iROM
- esp8266.ld: move modmachine.o to iROM
- esp8266.ld: move main.o to iROM
- add MP_FASTCODE modifier to put a function to iRAM
- main: mark nlr_jump_fail() as MP_FASTCODE
- modules/webrepl: enforce only one concurrent WebREPL connection
- etshal.h: add few more ESP8266 vendor lib prototypes
- modesp: add flash_user_start() function
- add support for building firmware version for 512K modules
- scripts: make neopixel/apa102 handle 4bpp LEDs with common code
- modutime: consistently convert to MP_ROM_QSTR/MP_ROM_PTR
- modnetwork: config(): fix copy-paste error in setting "mac"
- scripts/port_diag: add descriptions for esf_buf types
- modnetwork.c: allows AP reconnection without WiFi credentials
- main: bump heap size to 36K
- etshal.h: add prototypes for SPIRead/SPIWrite/SPIEraseSector
- etshal.h: adjust size of MD5_CTX structure
- modules: fix negative temperature in ds18x20 driver
- rename "machine" module implementation to use contemporary naming
- rework webrepl_setup to run over wired REPL
- espneopixel.c: solve glitching LED issues with cpu at 80MHz
- include upip as a standard frozen bytecode module
- update docs for esptool 1.2.1/SDK 2.0 (--flash_size=detect)
- modnetwork.c: expose configuration for station DHCP hostname
zephyr port:
- implement utime module
- use board/SoC values for startup banner based on Zephyr config
- initial implementation of machine.Pin
- zephyr_getchar: update for recent Zephyr refactor of console hooks
- support time -> utime module "weaklink"
- README: update for the current featureset, add more info
- mpconfigport.h: move less important params to the bottom
- Makefile: allow to adjust heap size from make command line
- Makefile: update comments to the current state of affairs
- Makefile: allow to override Zephyr config from make command line
- Makefile: add minimal port
- Makefile: add -fomit-frame-pointer to reduce code size
- mphalport.h: update for new "unified" kernal API (sleep functions)
docs:
- machine.SPI: bring up to date with Hardware API, make vendor-neutral
- machine.SPI: improve descriptions of xfer methods
- library/builtins: add docs for delattr and slice
- library/network: reword intro paragraph
- library/network: typo fixes, consistent acronym capitalization
- library/index: update TOCs so builtins sorted before modules
- utime: document ticks_cpu() in more detail
- utime: describe new semantics of ticks_diff() (signed ring arithmetics)
- utime: add docs for ticks_add(), improvements for other ticks_*()
- esp8266: update for new WebREPL setup procedure
- */quickref.rst: use new semantics of ticks_diff()
- library/machine.Pin: update Pin docs to align with new HW API
travis:
- integrate tools/check_code_size.sh
- minimal: Use CROSS=1, for binary size check
examples:
- http_server_simplistic: add "not suitable for real use" note
- hwapi: example showing best practices for HW API usage in apps
- hwapi: add hwconfig for DragonBoard 410c
This happens with some compilers on some architectures, which don't define
size_t as unsigned int. MicroPython's printf() dooesn't support obscure
format specifiers for size_t, so the obvious choice is to explicitly cast
to unsigned, to match %u used in printf().
It will soft-reboot micropython after a burst of writes to the
file system. This means that after you save files on your computer
they will be automatically rerun.
This can be disabled in the build by unsetting AUTORESET_TIMER in
mpconfigboard.h.
Using the REPL will also prevent the soft resets until you reset
with CTRL-D manually.
In order to have more fine-grained control over how builtin functions are
constructed, the MP_DECLARE_CONST_FUN_OBJ macros are made more specific,
with suffix of _0, _1, _2, _3, _VAR, _VAR_BETEEN or _KW. These names now
match the MP_DEFINE_CONST_FUN_OBJ macros.
Conflicts:
README.md - Kept Adafruit README.md intact.
py/emitglue.c - Added xtensa architecture as an OR of the define.
zephyr/README.md - Fixed spelling mistake.
Now there is just one function to allocate a new vstr, namely vstr_new
(in addition to vstr_init etc). The caller of this function should know
what initial size to allocate for the buffer, or at least have some policy
or config option, instead of leaving it to a default (as it was before).
"Forced exit" is treated as soft-reboot (Ctrl+D). But expected effect of
calling sys.exit() is termination of the current script, not any further
and more serious actions like mentioned soft reboot.
This new config option allows to control whether MicroPython uses its own
internal printf or not (if not, an external one should be linked in).
Accompanying this new option is the inclusion of lib/utils/printf.c in the
core list of source files, so that ports no longer need to include it
themselves.
Several ports use identical code for the 1-argument form of the builtin
help function. Move this code to a library function to allow easier
re-use by ports.
A port which uses lib/utils/pyexec.c but which does not enable garbage
collection should not need to implement the gc_collect function.
This patch also moves the gc_collect call to after printing the qstr
info. Since qstrs cannot be collected it should not make any difference
to the printed statistics.
The config variable MICROPY_MODULE_FROZEN is now made of two separate
parts: MICROPY_MODULE_FROZEN_STR and MICROPY_MODULE_FROZEN_MPY. This
allows to have none, either or both of frozen strings and frozen mpy
files (aka frozen bytecode).
Before this change, if REPL blocked executing some code, it was possible
to still input new statememts and excuting them, all leading to weird,
and portentially dangerous interaction.
TODO: Current implementation may have issues processing input accumulated
while REPL was blocked.
This is a convenience function similar to pyexec_file. It should be used
instead of raw mp_parse_compile_execute because the latter does not catch
and report exceptions.
In other words, unix port now uses overriden printf(), instead of using
libc's. This should remove almost all dependency on libc stdio (which
is bloated).
