This patch allows esp8266 to use @micropython.native and
@micropython.viper function decorators. By default the executable machine
code is written to the space at the end of the iram1 region. The user can
call esp.set_native_code_location() to make the code go to flash instead.
The 512k build recently overflowed because of the newly-enabled uselect
module. uselect is arguable more important than framebuf for small
devices so we disable framebuf to keep the 512k build within its limit.
So long as a port defines relevant mp_hal_pin_xxx functions (and delay) it
can make use of this software SPI class without the need for additional
code.
This prevents corrupting previous functional objects by stealing their pins
out from under them. It prevents this by ensuring that pins are in default
state before claiming them. It also verifies pins are released correctly and
reset on soft reset.
Fixes#4, instantiating a second class will fail.
Fixes#29, pins are now reset too.
Docs are here: http://tannewt-micropython.readthedocs.io/en/microcontroller/
It differs from upstream's machine in the following ways:
* Python API is identical across ports due to code structure. (Lives in shared-bindings)
* Focuses on abstracting common functionality (AnalogIn) and not representing structure (ADC).
* Documentation lives with code making it easy to ensure they match.
* Pin is split into references (board.D13 and microcontroller.pin.PA17) and functionality (DigitalInOut).
* All nativeio classes claim underlying hardware resources when inited on construction, support Context Managers (aka with statements) and have deinit methods which release the claimed hardware.
* All constructors take pin references rather than peripheral ids. Its up to the implementation to find hardware or throw and exception.
If a port defines MICROPY_READER_POSIX or MICROPY_READER_FATFS then
lexer.c now provides an implementation of mp_lexer_new_from_file using
the mp_reader_new_file function.
Implementations of persistent-code reader are provided for POSIX systems
and systems using FatFS. Macros to use these are MICROPY_READER_POSIX and
MICROPY_READER_FATFS respectively. If an alternative implementation is
needed then a port can define the function mp_reader_new_file.
Its addition was due to an early exploration on how to add CPython-like
stream interface. It's clear that it's not needed and just takes up
bytes in all ports.
The ESP SDK supports configuring the hostname that is
reported when doing a DHCP request in station mode. This commit
exposes that under network.WLAN(network.STA_IF).config('dhcp_hostname')
as a read/write value similar to other parameters.
Now, to use frozen bytecode all a port needs to do is define
FROZEN_MPY_DIR to the directory containing the .py files to freeze, and
define MICROPY_MODULE_FROZEN_MPY and MICROPY_QSTR_EXTRA_POOL.
Previously, it was included only in release builds, but it's important
tool which should be always at the fingertips to be useful (and to
pump up its usage).
At the WS2812 driver level, a 400ns value was used for T0H (time high to
send a 0 bit) but LED specification says it should be 350ns +- 150ns.
Due to loop overhead the 400ns value could lead to T0H close to 500ns
which is too close from the limit value and gave glitches (bad data to
pixels) in some cases. This patch makes the calculated T0H value 350ns.
Previously they used historical "pyb" affix causing confusion and
inconsistency (there's no "pyb" module in modern ports; but people
took esp8266 port as an example, and "pyb" naming kept proliferating,
while other people complained that source structure is not clear).
Size 64 was incorrect and will lead to stack corruption. Size 88 was
verified empirically. Also, allow to skip defining it if MD5_CTX
preprocessor macro is already defined (to avoid header conflict).
ESP8266 SDK2.0 fixes (at least, I can't reproduce it) an infamous bug
with crash during scan. 36K seams to be a safe value based on a download
test (test_dl.py), over 1GB was downloaded. More testing is needed, but
let's have other people participate by committing it now.
There is no automatic reconnect after wlan.active(False);
wlan.active(True). This commit provide the possibility to run
wlan.connect() without parameter, to reconnect to the previously
connected AP.
resolve#2493
The NeoPixel class now handles 4 bytes-per-pixel LEDs (extra byte is
intensity) and arbitrary byte ordering. APA102 class is now derived from
NeoPixel to reduce code size and support fill() operation.
To build, "make 512k".
Disabled are FatFs support (no space for filesystem), Python functionality
related to files, btree module, and recently enabled features. With all
this, there's only one free FlashROM page.
As we're looking towards adding OTA support, calculation of a FlashROM
area which can be used for filesystem (etc.) may become complex, so
introduce C function for that. So far it just hardcodes current value,
0x90000. In the future the function may be extended (and renamed) to
return the size of area too.
In order to have more fine-grained control over how builtin functions are
constructed, the MP_DECLARE_CONST_FUN_OBJ macros are made more specific,
with suffix of _0, _1, _2, _3, _VAR, _VAR_BETEEN or _KW. These names now
match the MP_DEFINE_CONST_FUN_OBJ macros.
SDK 2.0.0 goes into boot loop if a firmware is programmed over erased flash,
causing problems with user experience. This change implements behavior
similar to older SDKs': if clean flash is detected, default system
parameters are used.
As long as a port implement mp_hal_sleep_ms(), mp_hal_ticks_ms(), etc.
functions, it can just use standard implementations of utime.sleel_ms(),
utime.ticks_ms(), etc. Python-level functions.
Added options to make deploy so it can be used for ESP8266 boards with
other flash configurations. For example NodeMCU DEVKIT V1.0 can now use:
$ make FLASH_MODE=dio FLASH_SIZE=32m deploy
The delay_half parameter must be specified by the port to set up the
timing of the software SPI. This allows the port to adjust the timing
value to better suit its timing characteristics, as well as provide a
more accurate printing of the baudrate.
There is no need to take src_len and dest_len arguments. The case of
reading-only with a single output byte (originally src_len=1, dest_len>1)
is now handled by using the output buffer as the input buffer, and using
memset to fill the output byte into this buffer. This simplifies the
implementations of the spi_transfer protocol function.
machine.POWER_ON is renamed to machine.PWRON_RESET to match other
reset-cause constants that all end in _RESET. The cc3200 port keeps a
legacy definition of POWER_ON for backwards compatibility.
When dealing with a board which controls chip reset with UART's DTR/RTS,
we never see REASON_DEFAULT_RST (0), only REASON_EXT_SYS_RST (6). However,
trying a "raw" module with with just TXD/RXD UART connection, on power up
it has REASON_DEFAULT_RST as a reset reason.
According to the Arduino ESP8266 implementation the first argument to the
wifi scan callback is actually a bss_info pointer. This patch fixes the
iteration over this data so the first 2 entries are no longer skipped.
Fixes issue #2372.
Interrupts during neopixel_write causes timing problems and therefore
wrong light patterns. Switching off IRQs should help to keep the strict
timing schedule.
This new config option allows to control whether MicroPython uses its own
internal printf or not (if not, an external one should be linked in).
Accompanying this new option is the inclusion of lib/utils/printf.c in the
core list of source files, so that ports no longer need to include it
themselves.
modpybhspi now does the needed multiplexing, calling out to modpybspi
(bitbanging SPI) for suitable peripheral ID's. modmachinespi (previous
multiplexer class) thus not needed and removed.
modpybhspi also updated to following standard SPI peripheral naming:
SPI0 is used for FlashROM and thus not supported so far. SPI1 is available
for users, and thus needs to be instantiated as:
spi = machine.SPI(1, ...)
This extra forward slash for the starting-point directory is unnecessary
and leads to additional slashes on Max OS X which mean that the frozen
files cannot be imported.
Fixes#2374.
The OneWire class is now in its own onewire.py module, and the temperature
sensor class is in its own ds18x20.py module. The latter is renamed to
DS18X20 to reflect the fact that it will support both the "S" and "B"
variants of the device.
These files are moved to the modules/ subdirectory to take advantage of
frozen bytecode.
This is an object-oriented approach, where uos is only a proxy for the
methods on the vfs object. Some internals had to be exposed (the STATIC
keyword removed) for this to work.
Fixes#2338.
This type was used only for the typedef of mp_obj_t, which is now defined
by the object representation. So we can now remove this unused typedef,
to simplify the mpconfigport.h file.
That apparently will only help folks who read the docs on how to disable,
but could use a quick reminder straight in boot.py. For the developers,
it's important to have debug logging enabled in development branch
(master).
md5 is calculated over the entire file, except first 4 bytes, which contain
flash parameters and may be changed by flashing tool or MicroPython flash
auto-config.
Using __errno() function, and redirect it to use mp_stream_errno from
stream module. This is pre-requisite for integrating with 3rd-party libs,
like BerkeleyDB.
To filter out even prototypes of mp_stream_posix_*() functions, which
require POSIX types like ssize_t & off_t, which may be not available in
some ports.
The configuration bits for the UART register were wrong and the parity
couldn't be enabled, because the exist_parity member hasn't been updated. I
took this ESP8266 register description (http://esp8266.ru/esp8266-uart-reg/)
as reference.
Verification has been done with a logic analyzer.
The idea behind decrease is: bytecode and other static data is also kept on
heap, and can easily become half of heap, then setting threshold to half of
heap will have null effect - GC will happen on complete heap exhaustion like
before. But exactly in such config maintaining heap defragmented is very
important, so lower threshold to accommodate that.
To start with, the critical scripts _boot.py and flashbdev.py are frozen
to improve performance and reduce RAM consumption.
Saves about 1000 bytes of heap RAM for a bare boot with filesystem.
The time stamp is taken from the RTC for all newly generated
or changed files. RTC must be maintained separately.
The dummy time stamp of Jan 1, 2000 is set in vfs.stat() for the
root directory, avoiding invalid time values.
Based on my experience, there's rather non-zero chance to have an image be
flashed incorrectly. As --verify option is now works well in teh latest
esptool.py, enable it by default.
By design, at wake up from deepsleep, the RTC timer will be reset, but
the data stored in RTC memory will not [1]. Therefore, we have to adjust
delta in RTC memory before going into deepsleep to get almost correct
time after waking up.
[1] http://bbs.espressif.com/viewtopic.php?t=1184#p4082
Instead of calling strlen(), which won't work if there're 32 chars in
returned ESSID. struct bss_info::ssid_len is not documented in SDK API
Guide, but is present in SDK headers since 1.4.0. Just in case, previous
code is left commented.
ESP-SDK system_get_rtc_time() returns uint32 and therefore overflow
about every 7:45h. Let's write the last state of system_get_rtc_time()
in RTC mem and use it to check for overflow. This commit require running
pyb_rtc_get_us_since_2000() at least once within 7 hours to avoid
overflow.
