An SSL stream can only handle CLOSE and POLL ioctls. Other ones do not
make sense, or at least it doesn't make sense to pass the ioctl request
directly down to the underlying stream.
In particular MP_STREAM_GET_FILENO should not be passed to the underlying
stream because the SSL stream is not directly related to a file descriptor,
and the SSL stream must handle the polling itself.
Signed-off-by: Damien George <damien@micropython.org>
Some targets (eg PYBV10) have the socket module but are unable to create
UDP sockets without a registered NIC. So skip UDP tests on these targets.
Signed-off-by: Damien George <damien@micropython.org>
this implementation is hoped to be smaller. (feather_m4_express/fr fits
unlike the other PR; approximate savings ~600 bytes)
Minor difference to standard Python: A `dict` object has a
`move_to_end` method. However, calling this method always results in
TypeError.
Implementing it this way means that the method table can still be shared
between OrderedDict and builtin dict.
Closes#4408.
Previously this was explicitly enabled on esp32/stm32/renesas/mimxrt/samd,
but didn't get a default feature level because it wasn't in py/mpconfig.h.
With this commit it's now enabled at the "extra features" level, which adds
rp2, unix-standard, windows, esp8266, webassembly, and some nrf boards.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This provides similar functionality to the former zlib.DecompIO and
especially CPython's gzip.GzipFile for both compression and decompression.
This class can be used directly, and also can be used from Python to
implement (via io.BytesIO) zlib.decompress and zlib.compress, as well as
gzip.GzipFile.
Enable/disable this on all ports/boards that zlib was previously configured
for.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This will be replaced with a new deflate module providing the same
functionality, with an optional frozen Python wrapper providing a
replacement zlib module.
binascii.crc32 is temporarily disabled.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
... by the disassembly just below
This was tripped up because in exactly the right conditions some qstr
could be of the form 'xx 63' and make the expression `\.\+63` match
something other than what was intended.
This test was re-worked upstream for mpy version 6 so it'll be a conflict
to resolve when we get to that. :-/
This enables the specific use case of checking whether a note's release
phase has ended, but is also potentially useful to implement a sort of
"voice stealing" algorithm in Python code, which can take account of
the note's envelope state as well as other factors specific to the
program.
Prior to this fix, async for assumed the iterator expression was a simple
identifier, and used that identifier as a local to store the intermediate
iterator object. This is incorrect behaviour.
This commit fixes the issue by keeping the iterator object on the stack as
an anonymous local variable.
Fixes issue #11511.
Signed-off-by: Damien George <damien@micropython.org>
skip all the byecode hex data, it's adequately checked
by the disassembly just below
This was tripped up because in exactly the right conditions some qstr
could be of the form 'xx 63' and make the expression `\.\+63` match
something other than what was intended.
This test was re-worked upstream for mpy version 6 so it'll be a conflict
to resolve when we get to that. :-/
This commit adds the SSLContext class to the ssl module, and retains the
existing ssl.wrap_socket() function to maintain backwards compatibility.
CPython deprecated the ssl.wrap_socket() function since CPython 3.7 and
instead one should use ssl.SSLContext().wrap_socket(). This commit makes
that possible.
For the axtls implementation:
- ssl.SSLContext is added, although it doesn't hold much state because
axtls requires calling ssl_ctx_new() for each new socket
- ssl.SSLContext.wrap_socket() is added
- ssl.PROTOCOL_TLS_CLIENT and ssl.PROTOCOL_TLS_SERVER are added
For the mbedtls implementation:
- ssl.SSLContext is added, and holds most of the mbedtls state
- ssl.verify_mode is added (getter and setter)
- ssl.SSLContext.wrap_socket() is added
- ssl.PROTOCOL_TLS_CLIENT and ssl.PROTOCOL_TLS_SERVER are added
The signatures match CPython:
- SSLContext(protocol)
- SSLContext.wrap_socket(sock, *, server_side=False,
do_handshake_on_connect=True, server_hostname=None)
The existing ssl.wrap_socket() functions retain their existing signature.
Signed-off-by: Damien George <damien@micropython.org>
Tests framebuf1 and framebuf2 do not take the need for byte-aligned
strides into consideration when calculating buffer lengths.
Accordingly, the buffers allocated are slightly too small. Fixed
buffer length calculations.
Signed-off-by: Duncan Lowther <Duncan.Lowther@glasgow.ac.uk>
Structure descriptor in test extmod/uctypes_array_assign_le
is 6 bytes long, due to member "arr3" having length 4
(2 * UINT16) and offset 2, but only 5 bytes are allocated.
Increased buffer length to 6 bytes.
Signed-off-by: Duncan Lowther <Duncan.Lowther@glasgow.ac.uk>
This allows existing code that does `import uasyncio` or
`import uasyncio as asyncio` to continue working.
It uses the same lazy-loading as asyncio to prevent loading of unused
features.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Instead of having a special set of arguments to test for each math-module
function, just test all functions with all sets of arguments. This gives
improved test cases to prevent regressions.
Signed-off-by: Damien George <damien@micropython.org>
PEP-498 allows for conversion specifiers like !r and !s to convert the
expression declared in braces to be passed through repr() and str()
respectively.
This updates the logic that detects the end of the expression to also stop
when it sees "![rs]" that is either at the end of the f-string or before
the ":" indicating the start of the format specifier. The "![rs]" is now
retained in the format string, whereas previously it stayed on the end
of the expression leading to a syntax error.
Previously: `f"{x!y:z}"` --> `"{:z}".format(x!y)`
Now: `f"{x!y:z}"` --> `"{!y:z}".format(x)`
Note that "!a" is not supported by `str.format` as MicroPython has no
`ascii()`, but now this will raise the correct error.
Updated cpydiff and added tests.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a MicroPython-specific module that existed to support the old
version of uasyncio. It's undocumented and not enabled on all ports and
takes up code size unnecessarily.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Make tests run in an isolated environment (i.e. `import io` would
otherwise get the `tests/io` directory).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Make tests run in an isolated environment (i.e. `import io` would
otherwise get the `tests/io` directory).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Make tests run in an isolated environment (i.e. `import io` would
otherwise get the `tests/io` directory).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Prior to this commit, importing a module that exists but has a syntax error
or some other problem that happens at import time would result in a
potentially-incomplete module object getting added to sys.modules.
Subsequent imports would use that object, resulting in confusing error
messages that hide the root cause of the problem.
This commit fixes that issue by removing the failed module from sys.modules
using the new NLR callback mechanism.
Note that it is still important to add the module to sys.modules while the
import is happening so that we can support circular imports just like
CPython does.
Fixes issue #967.
Signed-off-by: David Grayson <davidegrayson@gmail.com>
When foo.bar is imported, bar is added as an attribute to foo. Previously
this happened on every import, but should only happen on first import.
This verifies the behavior for relative imports and overriding.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This verifies the behavior:
- Exact matches of built-ins bypass filesystem.
- u-prefix modules can be overridden from the filesystem.
- Builtin import can be forced using either u-prefix or sys.path=[].
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This demonstrates how to add a sub-package in a user c module, as well
as how to define the necessary qstrs and enable the feature in the build.
This is used by the unix coverage build to test this feature.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This generalises and simplifies the code and follows CPython behaviour.
See similar change for floats in a07fc5b640.
Signed-off-by: Damien George <damien@micropython.org>
This is possible now that MP_UNARY_OP_INT_MAYBE exists.
As a consequence mp_obj_get_int now also supports user types, which was
previously possible with MP_UNARY_OP_INT but no tests existed for it.
Signed-off-by: Damien George <damien@micropython.org>
To be consistent with MP_UNARY_OP_INT_FLOAT and MP_UNARY_OP_INT_COMPLEX,
and allow int() to first check if a type supports __int__ before trying
other things (as per CPython).
Signed-off-by: Damien George <damien@micropython.org>
MicroPython does not support these special methods, and they may get in the
way of other tests (eg indexing with __int__).
Signed-off-by: Damien George <damien@micropython.org>
Apply envelope & panning after biquad filtering.
This may fix the weird popping problem. It also reduces the number
of operations that are done "in stereo", so it could help performance.
It also fixes a previously unnoticed problem where a ring-modulated
waveform had 2x the amplitude of an un-modulated waveform.
The test differences look large but it's because some values got changed
in the LSB after the mathematical divisions were moved around.
The code that handles inplace-operator to normal-binary-operator fallback
is moved in this commit from py/objtype.c to py/runtime.c, making it apply
to all types, not just user classes.
Signed-off-by: Damien George <damien@micropython.org>
So that user types can implement reverse operators and have them work with
str on the left-hand-side, eg `"a" + UserType()`.
Signed-off-by: Damien George <damien@micropython.org>
This adds a unary_op implementation for the dict_view type that makes
the implementation of `hash()` for these types compatible with CPython.
Signed-off-by: David Lechner <david@pybricks.com>
As per https://bugs.python.org/issue408326, the slice object should not be
hashable. Since MicroPython has an implicit fallback when the unary_op
slot is empty, we need to fill this slot.
Signed-off-by: David Lechner <david@pybricks.com>
Previously when using --via-mpy, the file was compiled to tests/<tmp>.mpy
and then run using `micropython -m <tmp>` in the current cwd
(usually tests/). This meant that an import in the test would be resolved
relative to tests/.
This is different to regular (non-via-mpy) tests, where we run (for
example) `micropython basics/test.py` which means that an import would be
resolved relative to basics/.
Now --via-mpy matches the .py behavior. This is important because:
a) It makes it so import tests do the right thing.
b) There are directory names in tests/ that match built-in module names.
Furthermore, it always ensures the cwd (for both micropython and cpython)
is the test directory (e.g. basics/) rather than being left unset. This
also makes it clearer inside the test that e.g. file access is relative to
the Python file.
Updated tests with file paths to match.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
this has the side effect of making some notes more accurate, the new
frequency= value in the test is closer to the true midi frequency of
830.609...Hz.
This class allows much more expressive sound synthesis:
* tremolo & vibrato
* arbitrary frequency
* different evelope & waveform per note
* all properties dynamically settable from Python code
When a tuple is the condition of an if statement, it's only possible to
optimise that tuple away when it is a constant tuple (ie all its elements
are constants), because if it's not constant then the elements must be
evaluated in case they have side effects (even though the resulting tuple
will always be "true").
The code before this change handled the empty tuple OK (because it doesn't
need to be evaluated), but it discarded non-empty tuples without evaluating
them, which is incorrect behaviour (as show by the updated test).
This optimisation is anyway rarely applied because it's not common Python
coding practice to write things like `if (): ...` and `if (1, 2): ...`, so
removing this optimisation completely won't affect much code, if any.
Furthermore, when MICROPY_COMP_CONST_TUPLE is enabled, constant tuples are
already optimised by the parser, so expression with constant tuples like
`if (): ...` and `if (1, 2): ...` will continue to be optimised properly
(and so when this option is enabled the code that's deleted in this commit
is actually unreachable when the if condition is a constant tuple).
Signed-off-by: Damien George <damien@micropython.org>
ESP-NOW is a proprietary wireless communication protocol which supports
connectionless communication between ESP32 and ESP8266 devices, using
vendor specific WiFi frames. This commit adds support for this protocol
through a new `espnow` module.
This commit builds on original work done by @nickzoic, @shawwwn and with
contributions from @zoland. Features include:
- Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO.
- Signal strength (RSSI) monitoring.
- Core support in `_espnow` C module, extended by `espnow.py` module.
- Asyncio support via `aioespnow.py` module (separate to this commit).
- Docs provided at `docs/library/espnow.rst`.
Methods available in espnow.ESPNow class are:
- active(True/False)
- config(): set rx buffer size, read timeout and tx rate
- recv()/irecv()/recvinto() to read incoming messages from peers
- send() to send messages to peer devices
- any() to test if a message is ready to read
- irq() to set callback for received messages
- stats() returns transfer stats:
(tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts)
- add_peer(mac, ...) registers a peer before sending messages
- get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt)
- mod_peer(mac, ...) changes peer info parameters
- get_peers() returns all peer info tuples
- peers_table supports RSSI signal monitoring for received messages:
{peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...}
ESP8266 is a pared down version of the ESP32 ESPNow support due to code
size restrictions and differences in the low-level API. See docs for
details.
Also included is a test suite in tests/multi_espnow. This tests basic
espnow data transfer, multiple transfers, various message sizes, encrypted
messages (pmk and lmk), and asyncio support.
Initial work is from https://github.com/micropython/micropython/pull/4115.
Initial import of code is from:
https://github.com/nickzoic/micropython/tree/espnow-4115.
Changes in this commit:
- Change MICROPY_HW_BOARD_NAME definition to match the product name.
- Rename board folder's name to match the product name style.
- Change related files like Makefile, document descriptions, test cases, CI
and tools.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
btstack only supports central-initiated, so this allows us to have a test
that works on both (ble_mtu.py), and then another one for just the NimBLE
supported behavior (ble_mtu_peripheral.py).
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
On unix, time.sleep is implemented as select(timeout=<time>) which means
that it does not run the poll hook during sleeping.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
this allows to test how the midi synthesizer is working, without access
to hardware. Run `micropython-coverage midi2wav.py` and it will create
`tune.wav` as an output.
