2378be4e93
stmhal: Allow to configure UART pins completely via mpconfigboard.h.
2015-05-03 13:48:26 +01:00
8c8d7f3c60
cc3200: Clean up pyb.Pin
...
Remove unused and unneeded functions, also create Pin.get_config() that
returns the whole configuration of the pin.
This reduces code size by ~500 bytes.
2015-05-03 11:26:56 +02:00
e4c899a08c
cc3200: WLAN.ifconfig returns an attrtuple instead of a dictionary.
2015-05-03 11:26:25 +02:00
f54bdecff2
cc3200: Implement Sleep.wake_reason()
2015-05-03 11:21:14 +02:00
71d482df47
cc3200: Clear the pending interrupt flag when disabling RTC callbacks.
2015-05-03 11:21:12 +02:00
a9afcb159a
unix/modffi.c: get_buffer is allowed to return NULL if len=0.
...
This is consistent with the logic in mp_get_buffer, and the code here is
an inlined version of that function.
2015-05-01 21:34:08 +01:00
a62c106974
msvc: Allow overriding of build options with custom file
...
- by default look for a user.props in the msvc directory, which is more convenient
than the built-in way of looking for such file in the user's home directory
- make git ignore the file
2015-04-30 10:14:59 +02:00
6f218d7472
cc3200: Move wlan_init0() to the boot section.
...
This one creates a semaphore, therefore it must be executed only
after a hard reset (or when coming out of hibernation).
2015-04-29 16:10:40 +02:00
d8713d78f5
cc3200: Correct Sleep module name. Must be 'Sleep', not 'sleep'.
2015-04-29 15:27:28 +02:00
e282884e54
cc3200: When requesting safe boot, blink the led 3 times, not 4.
2015-04-29 15:27:21 +02:00
dbb4aef5e3
cc3200: Make WLAN.isconnected() also work in AP mode.
...
While in STA mode isconnected() returns True when connected to an AP
and the IP has been acquired. In AP mode, WLAN.isconnected() returns
True if at least one connected station is present.
2015-04-29 15:26:21 +02:00
bf4576dc91
cc3200: Clean-up servers enable/disable algorithm.
2015-04-29 14:25:44 +02:00
c3e37a0cde
stmhal: Automatically re-enable IRQs on the USB REPL.
...
This allows errors to be seen and prevents hanging
the board from doing: pyb.disable_irq()
2015-04-29 08:27:38 +01:00
f27aa27a0c
py/repl.c: Fix shadowing of local variable "i".
2015-04-29 01:01:48 +01:00
a1a2c411b2
py, readline: Add tab autocompletion for REPL.
...
Can complete names in the global namespace, as well as a chain of
attributes, eg pyb.Pin.board.<tab> will give a list of all board pins.
Costs 700 bytes ROM on Thumb2 arch, but greatly increases usability of
REPL prompt.
2015-04-29 00:46:26 +01:00
b7a4f15b34
mp-readline: Save "prompt" string in readline state.
2015-04-29 00:32:35 +01:00
ad9daadf8a
py: Fix attrtuple array length in print and creation.
2015-04-29 00:17:48 +01:00
95f53461c2
py: Replace py-version.sh with makeversionhdr.py, written in Python.
...
Also rename py-version.h to mpversion.h for consistency with mpconfig.h.
2015-04-28 23:52:36 +01:00
d11317bcab
cc3200: Make WLAN scan results a list of attrtupple.
...
Each result is displayed like this:
ssid='MySSID', bssid=b'\xc0J\x00z.\xcc', security=2, channel=None, rssi=-74
The CC3200 doesn't provide channel info, that why is 'None'.
2015-04-29 00:04:01 +02:00
94792dd88f
py: In attrtuple use the correct length value and index for 'fields'.
2015-04-29 00:04:00 +02:00
5225e29ce7
cc3200: Remove unneeded -lgcc in Makefile.
2015-04-29 00:03:58 +02:00
f81684141e
cc3200: Implement os.uname() to get details of the OS and hardware.
2015-04-29 00:03:56 +02:00
6fefd5d330
cc3200: Move telnet_process_credential with the other private functions.
...
Just for consistency.
2015-04-29 00:03:54 +02:00
6bbbb1ab41
unix/modffi: Support passing float/double args.
2015-04-28 19:40:34 +01:00
f1ed8c8a2e
cc3200: Improve telnet_parse_input() in case of an incomplete option.
2015-04-28 16:48:33 +02:00
0458833072
cc3200: Make telnet login procedure work with Tera Term.
...
This is actually a workaround Ter Term's issue of not obeying to the
telnet options that the server is sending. Therefore, we must buffer
chars until either a '\r' or the max length of the username/password
is received.
2015-04-28 16:48:26 +02:00
abea1c38a9
lib/libc: Add memchr. We already have strchr, but memchr is useful too.
2015-04-28 16:48:20 +02:00
9fbc265eb8
cc3200: Add delays to allow the servers to start and stop properly.
2015-04-28 15:16:33 +02:00
d34c4784a5
cc3200: Select NIC when the socket is created.
...
This makes sense since only WLAN is supported here.
2015-04-28 15:14:36 +02:00
fdcb3b7ebb
stmhal: Actually disable unhandled timer interrupts.
2015-04-28 00:17:05 -07:00
9472907ae1
py: Fix handling of negative numbers in struct.pack of q/Q.
2015-04-25 23:51:14 +01:00
ae2c81ff38
vm: On exiting except block, clear sys.exc_info() value.
...
This doesn't handle case fo enclosed except blocks, but once again,
sys.exc_info() support is a workaround for software which uses it
instead of properly catching exceptions via variable in except clause.
2015-04-26 01:40:37 +03:00
0f553fe10b
py: Implement power op for long-long implementation of bignum.
2015-04-25 23:28:10 +01:00
271d18eb08
py: Support conversion of bignum to bytes.
...
This gets int.to_bytes working for bignum, and also struct.pack with 'q'
and 'Q' args on 32-bit machines.
Addresses issue #1155 .
2015-04-25 23:16:39 +01:00
7c8b4c1a8b
cc3200: Correct MAKE_SOCKADDR and UNPACK_SOCKADDR byte order.
2015-04-25 23:36:45 +02:00
8b85d14b92
modsys: Add basic sys.exc_info() implementation.
...
The implementation is very basic and non-compliant and provided solely for
CPython compatibility. The function itself is bad Python2 heritage, its
usage is discouraged.
2015-04-25 03:49:23 +03:00
cf5b6f6974
objfun: Fix to stackless mode after recent refactor.
2015-04-25 01:43:45 +03:00
8c1d23a0e2
py: Modify bytecode "with" behaviour so it doesn't use any heap.
...
Before this patch a "with" block needed to create a bound method object
on the heap for the __exit__ call. Now it doesn't because we use
load_method instead of load_attr, and save the method+self on the stack.
2015-04-24 01:52:28 +01:00
ede0f3ab3d
py: Add optional code to check bytes constructor values are in range.
...
Compiled in only if MICROPY_CPYTHON_COMPAT is set.
Addresses issue #1093 .
2015-04-23 15:28:18 +01:00
fd787c5e4e
stmhal: Reset the timer counter to zero after changing the auto reload.
...
Because if the counter is above the new value of the auto-reload register
then it may be a long time until the timer wraps around.
2015-04-22 23:31:56 +01:00
40d43ea88d
tests: Add more tests for viper, including tests for ViperTypeError's.
2015-04-22 23:18:28 +01:00
5e9810396f
py/objint_mpz.c: Make int_from_uint actually return uint.
2015-04-22 23:17:34 +01:00
f66ee4dfd7
py/mpz.c: Fix bug with shl not truncating zero digits correctly.
2015-04-22 23:16:49 +01:00
8f6aad2f48
py/emitnative.c: Fix stack adjustment when erroring on binary op.
2015-04-22 23:16:03 +01:00
eaefc8b9d6
cc3200: Add WiPy specific information to README.md
2015-04-22 21:03:10 +02:00
1f9e2188a6
tests: Add tests for attrtuple, and for more corner cases.
2015-04-22 16:52:03 +01:00
956d765786
py: Fix printing of "inf" and "nan" floating point values.
2015-04-22 16:51:29 +01:00
c52f1258a8
msvc: Update genhdr script to emit MicroPython version numbers
2015-04-22 12:07:30 +02:00
dea853d3a3
docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup.
2015-04-21 22:35:17 +01:00
4735c45c51
py: Clean up some bits and pieces in parser, grammar.
2015-04-21 16:43:18 +00:00
Eero af Heurlin
Daniel Campora
Damien George
stijn
Dave Hylands
Matt Anderson
Paul Sokolovsky