edd0e0f93d
stm32/timer: Expose the PWM BRK capability of Timer 1 and 8.
...
The break mode is configurable via the 'brk' keyword to the Timer
constructor and init method. It's disabled by default.
2019-04-01 13:30:37 +11:00
9d6f70f715
stm32: Make default USB_VCP stream go through uos.dupterm for main REPL.
...
Use uos.dupterm for REPL configuration of the main USB_VCP(0) stream on
dupterm slot 1, if USB is enabled. This means dupterm can also be used to
disable the boot REPL port if desired, via uos.dupterm(None, 1).
For efficiency this adds a simple hook to the global uos.dupterm code to
work with streams that are known to be native streams.
2019-04-01 13:04:05 +11:00
0fb15fc3f4
docs/develop: Remove paragraph that was copied in error from other doc.
2019-03-29 11:50:39 +11:00
6947dff7da
stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile.
2019-03-29 11:34:05 +11:00
1a608ce1e8
stm32/boards/STM32L476DISC: Enable servo support on STM32L476DISC board.
2019-03-28 15:35:58 +11:00
95b6330403
docs/esp32: Add example for pin isolation in combination with deepsleep.
2019-03-28 15:25:41 +11:00
92149c8a79
esp32/boards: Enable dual core support by default.
...
Single core is still supported, just by adding CONFIG_FREERTOS_UNICORE=y to
a custom sdkconfig file.
2019-03-27 11:20:21 +11:00
815b79a8d0
esp32/mpthreadport: Exit vPortCleanUpTCB early if threading not init'd.
2019-03-27 11:11:06 +11:00
0b86ba565c
unix/mpthreadport: Use named semaphores on Mac OS X.
...
Unnamed semaphores (via sem_init) are not supported on this OS. See #4465 .
2019-03-27 10:50:01 +11:00
968b688055
tests/extmod: Add test for FAT filesystem on a very large block device.
2019-03-27 10:22:38 +11:00
781947afdc
stm32/mpconfigport.h: Remove malloc/free/realloc helper macros.
...
These macros are unused, and they can conflict with other entities by the
same name. If needed they can be provided as static inline functions, or
just functions.
Fixes issue #4559 .
2019-03-26 18:42:19 +11:00
1556af19bf
mpy-cross: Support compiling with MICROPY_PY___FILE__ enabled.
2019-03-26 18:19:21 +11:00
74d07469f2
extmod/vfs_fat: Fallback to FAT32 if standard FAT16/SFD format fails.
...
This allows formatting SD cards, larger flash etc which do not support the
default FAT16/SFD format mode.
2019-03-26 17:15:23 +11:00
d396a7e10d
stm32/system_stm32: Provide default value for HSI calibration.
...
If HSI is used the calibration value must be valid. Fixes #4596 .
2019-03-26 17:10:21 +11:00
869a8b70ce
tools/pyboard.py: Add missing line from example usage comments.
2019-03-26 16:52:41 +11:00
dce785cc3d
py/nlrthumb: Add support for iOS where the C func is _nlr_push_tail.
2019-03-26 16:48:11 +11:00
8977c7eb58
py/scheduler: Convert micropythyon.schedule() to a circular buffer.
...
This means the schedule operates on a first-in, first-executed manner
rather than the current last-in, first executed.
2019-03-26 16:35:42 +11:00
2befcb8a9d
zephyr/i2c: Add support for hardware i2c.
...
Adds support for hardware i2c to the zephyr port. Similar to other ports
such as stm32 and nrf, we only implement the i2c protocol functions
(readfrom and writeto) and defer memory operations (readfrom_mem,
readfrom_mem_into, and writeto_mem) to the software i2c implementation.
This may need to change in the future because zephyr is considering
deprecating its i2c_transfer function in favor of i2c_write_read; in this
case we would probably want to implement the memory operations directly
using i2c_write_read.
Tested with the accelerometer on frdm_k64f and bbc_microbit boards.
2019-03-26 16:16:26 +11:00
673db939b5
esp32/machine_pin: Rework pull mode config to fix GPIO hold feature.
...
For gpio_hold_en() to work properly (not draw additional current) pull
up/down must be disabled when hold is enabled. This patch makes sure this
is the case by reworking the pull constants to be a bit mask.
2019-03-26 15:21:23 +11:00
e0c6dfe90a
nrf/readme: Add section about LTO.
...
Adding section about on how to disable use of the linker flag
-flto, by setting the LTO=0 argument to Make. Also, added a
note on recommended toolchains to use that works well with
LTO enabled.
2019-03-19 16:59:18 +01:00
440462b18e
py/runtime: Remove long-obsolete MICROPY_FSUSERMOUNT init code.
...
In 1808b2e8d5
2019-03-20 00:16:37 +11:00
ec6e62efc2
stm32/mboot: Set USE_MBOOT=1 by default in the Makefile.
...
This allows boards that need USE_MBOOT to be built properly whether or not
USE_MBOOT=1 is specified when building mboot.
2019-03-18 14:01:43 +11:00
696549d2e5
nrf/bluetooth: Deprecate use of SoftDevice s140 v6.0.0.
...
Removing linker script for nrf52840 s140 v6.0.0 as pca10056
target board now points to the new v6.1.1. Also, removing the
entry from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
a3a266a9c3
nrf/board: Migrate nrf52840 target to new BLE stack.
...
This patch moves pca10056/nrf52840 target board to use
the new SoftDevice s140 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
d3c1436e75
nrf/bluetooth: Add support for SoftDevice s140 version 6.1.1.
...
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
1e5e3e3d48
nrf/bluetooth: Deprecate use of SoftDevice s132 v6.0.0.
...
Removing linker script for nrf52832 s132 v6.0.0 as all target
boards now points to the new v6.1.1. Also, removing the entry
from the download_ble_stack.sh script.
2019-03-15 20:50:15 +01:00
5f26ef1112
nrf/board: Migrate all nrf52832 targets to new BLE stack.
...
This patch moves all the nrf52832 target boards to use the
new SoftDevice s132 v6.1.1 instead of the legacy v6.0.0.
2019-03-15 20:50:15 +01:00
e8ed2dea71
nrf/bluetooth: Add support for SoftDevice s132 version 6.1.1.
...
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
2019-03-15 20:50:15 +01:00
c9eb7eb449
stm32/stm32_it: Guard UART7_IRQHandler with check for UART7 define.
...
All STM32 with a UART7 also have a UART8 and vice versa, but this change
improves readability and allows for them to be independent in the future.
2019-03-14 14:02:21 +11:00
c7d19dc0ad
ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code.
2019-03-14 12:22:49 +11:00
5a6026c614
py/compile: Check that arch is set when compiling native, viper or asm.
2019-03-14 12:22:25 +11:00
55fcb83a42
py/compile: Support multiple inline asm emitters.
2019-03-14 12:22:25 +11:00
9c9bc65e74
mpy-cross: Add "-march=<arch>" option to select native emitter.
2019-03-14 12:22:25 +11:00
d9d92f27d7
py/compile: Add support to select the native emitter at runtime.
2019-03-14 12:22:25 +11:00
0e4c24ec08
py/nativeglue: Rename native convert funs to match other native helpers.
2019-03-14 12:22:25 +11:00
3b973a5658
py: Move mp_native_type_from_qstr() from emitnative.c to nativeglue.c.
2019-03-14 12:22:25 +11:00
28c2873d99
docs/esp32: Add a note to quickref about use of Pin.PULL_HOLD.
2019-03-14 07:38:50 +11:00
6fa830bfd8
docs/library/machine.Pin: Add PULL_HOLD constant to possible pin pulls.
...
As already mentioned in the docs, not all constants may be available on all
ports, so this is optional to implement.
2019-03-14 07:29:04 +11:00
ddc934631c
esp32/machine_pin: Add new PULL_HOLD pin pull mode.
2019-03-14 07:28:57 +11:00
349b54525e
esp32/machine_pin: Make it so None as pull value disables pull up/down.
...
Previously specifying None as the pull value would leave the pull up/down
state unchanged. This change makes it so -1 leaves the state unchanged and
None makes the pin float, as per the docs.
2019-03-14 07:26:59 +11:00
ea2fcdd338
javascript: Fix Emscripten async load, and to compile with modern clang.
2019-03-13 23:52:15 +11:00
7d675f3a17
javascript: Add new port targeting JavaScript via Emscripten.
...
In this port JavaScript is the underlying "machine" and MicroPython is
transmuted into JavaScript by Emscripten. MicroPython can then run under
Node.js or in the browser.
2019-03-13 23:47:32 +11:00
921b999225
extmod/moduselect: Adjust select_select and poll_register to use size_t.
2019-03-13 23:18:59 +11:00
912e957512
docs/develop: Fix typos in C-module example for example_add_ints.
2019-03-13 12:54:01 +11:00
ea95bdc1ca
docs/pyboard: Make pyboard v1.1 pinout the default shown in quickref.
2019-03-13 12:37:35 +11:00
d390ad9053
docs/pyboard: Add link to pyboard v1.1 schematic and layout PDF.
2019-03-13 12:33:02 +11:00
68a5d6fe77
extmod/modlwip: Fix case where concurrency lock isn't released on error.
2019-03-12 22:35:52 +11:00
493ee7df18
zephyr/prj_frdm_kw41z.conf: Add new board configuration.
...
Adds a new board configuration for the frdm_kw41z board, including support
for the fxos8700 accelerometer/magnetometer/die temperature sensor.
2019-03-12 17:12:13 +11:00
7748375b6e
zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor.
...
Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the
frdm_k64f board configuration.
2019-03-12 17:12:00 +11:00
6d82499a48
zephyr/Makefile: Proxy ram_report, rom_report targets from Zephyr.
2019-03-12 17:11:52 +11:00
roland van straten
Andrew Leech
Damien George
Boris Vinogradov
spacemanspiff2007
Damiano Mazzella
Andrew Leech
rhubarbdog
Romain Goyet
Maureen Helm
Glenn Ruben Bakke
Dave Hylands
Nguyen Hoan Hoang
Wolf Vollprecht
Rami Ali
Martin Fischer
johnthagen
Paul Sokolovsky