cb7693bab4
esp8266/main: Update _boot module loading for recent frozen modules refactors.
2016-05-22 04:09:15 +03:00
9c2217a165
esp8266: Enable collections.OrderedDict.
2016-05-22 02:57:33 +03:00
0ab372585f
extmod/moduos_dupterm: Dumpterm subsystem is responsible for closing stream.
...
Make dupterm subsystem close a term stream object when EOF or error occurs.
There's no other party than dupterm itself in a better position to do this,
and this is required to properly reclaim stream resources, especially if
multiple dupterm sessions may be established (e.g. as networking
connections).
2016-05-20 22:20:37 +03:00
a0a08b4be1
esp8266: Add APA102 serial individually controllable LEDs support.
...
APA102 is a new "smart LED", similar to WS2812 aka "Neopixel".
2016-05-19 22:29:11 +03:00
6fa60153ea
esp8266/README: Add a very first start section.
...
Adding a very first start section to get people going after flashing.
I tried to condense it to a minimum to avoid as much as possible
redundancy and bloating.
2016-05-19 21:10:35 +03:00
418faae8f7
esp8266/scripts/webrepl_setup: Add max password length check.
...
modwebrepl truncates password to 9 chars, and that led people to confusion.
2016-05-17 02:21:45 +03:00
21ec1fd850
esp8266/scripts/webrepl_setup: Show password placeholder char.
...
That was the intent for the initial user setup, but didn't work before
due to lwIP issues. Enable now that they're fixed.
2016-05-17 00:01:41 +03:00
7327d5f6f7
esp8266/scripts/port_diag: Add network diagnostic output.
2016-05-16 23:52:58 +03:00
a676a41cb7
esp8266/moduos.c: Addition of the rename method to module uos.
...
That one was missing in the module, even if it was available in the
vfs object. The change consist of adding the name and preparing the
call to the underlying vfs module, similar to what was already
implemented e.g. for remove.
Rename is useful by itself, or for instance for a safe file replace,
consisting of the sequence:
write to a temp file
delete the original file
rename the temp file to the original file's name
2016-05-16 13:19:13 +02:00
0d6d315ba6
esp8266: Change to use internal errno's.
2016-05-12 12:49:36 +01:00
7e1f580910
esp8266: Enable uerrno module, weak linked also as errno.
2016-05-10 23:30:39 +01:00
4f2ba9fbdc
esp8266: Convert to use new MP_Exxx errno symbols.
...
These symbols are still defined in terms of the system Exxx symbols, and
can be switched to internal numeric definitions at a later stage.
Note that extmod/modlwip still uses many system Exxx symbols.
2016-05-10 23:30:39 +01:00
d60cb8e180
esp8266/help: Add "sta_if.active(True)" command.
...
As reported on the forum by Roberthh.
2016-05-10 23:21:32 +03:00
f16bec6bc9
esp8266/mpconfigport: Reduce various parser-related allocation params.
...
This gives noticeable result for parsing simple input (modelled on 32-bit
unix port):
Before:
>>> micropython.mem_total()
3360
>>> micropython.mem_total()
4472
After:
>>> micropython.mem_total()
3072
>>> micropython.mem_total()
4052
However, effect on parsing large input is much less conclusive, e.g.:
Before:
>>> micropython.mem_total()
3376
>>> import pystone_lowmem
>>> micropython.mem_total()
33006
delta=29630
After:
>>> micropython.mem_total()
3091
>>> import pystone_lowmem
>>> micropython.mem_total()
32509
delta=29418
2016-05-10 15:38:31 +03:00
de5e0ed2e0
esp8266/main: Bump heap size to 28K.
...
This is kind of compensation for 4K FatFs buffer size which is eaten away
from it on FS mount. This should still leave enough of networking ("OS")
heap.
2016-05-09 19:02:40 +03:00
13a1acc7e2
esp8266/scripts/webrepl: Add start_foreground() method.
...
Starts WebREPL server in foreground and waits for (single) connection.
2016-05-08 20:01:15 +03:00
2724bd4a94
esp8266/scripts/webrepl: Add optional password argument to webrepl.start()
...
This commit fixes issue #2045
2016-05-07 22:45:08 +03:00
13d06a83e1
esp8266/scripts/: Add fill() to NeoPixel
2016-05-07 21:15:33 +03:00
8db61e5b5a
esp8266/scripts/inisetup: Don't start WebREPL on boot in master branch.
...
It interferes with running testsuite. master branch should be optimized for
development, so any features which interfere with that, would need to be
disabled by default.
2016-05-07 20:04:45 +03:00
df2b1a4758
esp8266/scripts/: Remove use of pin.PULL_NONE.
...
This constant is no longer part of hardware API (replaced with just None),
and is a default, so not needed in calls.
2016-05-05 23:47:37 +03:00
fb5017f9dc
esp8266/main: Set sys.path to ["", "/", "/lib"].
2016-05-03 18:25:27 +03:00
496a601c3b
esp8266: Shrink help text by a few lines, to fit in smaller windows.
2016-05-03 15:54:57 +01:00
f873a5005a
esp8266/scripts/ntptime: Add simple NTP client.
...
.time() returns seconds since MicroPython epoch (2000-01-01 00:00UTC),
.settime() sends current system time, assuming UTC timezone.
2016-05-03 16:47:42 +03:00
8e130fcf2b
esp8266/modpybpin: Make pin.irq() methods take keyword args.
2016-05-03 13:47:10 +01:00
8a3e9036eb
esp8266/modpybpin: Use None instead of PULL_NONE for no-pull config.
2016-05-03 13:13:56 +01:00
9df6b3a2c2
esp8266/modpybpin: Use enum+array instead of struct for parsing args.
2016-05-03 12:44:28 +01:00
b539a61490
esp8266/scripts/neopixel.py: Swap red and green in pixel accessor.
2016-05-03 11:17:37 +01:00
5e94f0b43a
esp8266/scripts/inisetup: Update for nic.mac() method being gone.
2016-05-03 02:16:42 +03:00
35e63f0007
esp8266/modnetwork: Remove .mac() method, move to .config("mac").
...
Querying/setting MAC address is pretty adhoc operation to belong to
.config() instead of taking a whole method on its own.
2016-05-03 01:02:14 +03:00
3944d3511f
esp8266/scripts/inisetup: Enable WebREPL auto-start on boot.
2016-05-03 00:38:47 +03:00
76c81cd5a6
esp8266/modesp: Add malloc() and free() functions.
...
Useful for testing fragmentation issues in OS heap. E.g. freemem() may
report large amount, but is it possible to actually allocate block of
a given size? Issue malloc() (followed by free()) to find out.
2016-05-03 00:35:11 +03:00
2123ced3f4
esp8266/modesp: Add esf_free_bufs() debugging function.
...
Return number of free inernal WiFi buffers.
2016-05-03 00:26:22 +03:00
3d830415bc
esp8266/esp_mphal: Add ets_esf_free_bufs(), etc. functions.
...
Returning free number of various WiFi driver packet buffers.
2016-05-03 00:18:14 +03:00
7b7c99fec1
esp8266/modnetwork: Remove deprecated wifi_mode().
...
Network interfaces are now controlled individually using .active() method.
2016-05-03 00:09:23 +03:00
9215cdc7fd
esp8266: Change platform name from ESP8266 to esp8266.
...
The port name is lowercase, and this change is made for consistency with
the docs and other ports.
2016-05-02 18:54:46 +01:00
13d9d50fea
esp8266/scripts/webrepl_setup: Reject too short passwords.
2016-05-02 18:48:32 +03:00
26fd0ac571
esp8266/Makefile: Be sure to pass cross-compiling AR when building axtls.
...
Fixes build under MacOSX.
2016-05-02 01:22:42 +03:00
9dd2c92d01
esp8266/README: Mention WebREPL.
2016-04-30 23:02:54 +03:00
c1d1c562f3
esp8266/scripts/webrepl: Add "first connection" mode to setup password.
...
If there's no port_config.py file, or it lacks WEBREPL_PASS variable,
"initial setup mode" will be entered on first WebREPLconnection. User
will be asked for password, which will be written to
port_config.WEBREPL_PASS, and system restarted to work in normal mode
with password active.
2016-04-30 20:41:09 +03:00
962d5a987f
esp8266/scripts/webrepl: Switch to using _webrepl object wrapper.
...
Handling of binary protocol is untested on esp8266 so far.
2016-04-30 20:39:35 +03:00
006ffe1561
esp8266/scripts/webrepl: Connection ack prompt is now printed by modwebrepl.
...
After password is checked.
2016-04-30 20:38:05 +03:00
6ddd9f3e2b
esp8266/scripts/inisetup: Create default boot.py in filesystem.
...
Currently it pre-imports webrepl, but doesn't start it.
2016-04-29 20:11:48 +03:00
74f413bc60
esp8266/scripts/_boot: builtins is no longer used.
2016-04-29 20:04:17 +03:00
d86d65f625
esp8266/scripts: Move all of initial setup to inisetup module.
2016-04-29 20:02:59 +03:00
adae53d522
esp8266: Enable webrepl module.
2016-04-29 19:38:21 +03:00
f8170db390
esp8266: Enable WebREPL file transfer rate limiting.
2016-04-29 19:15:26 +03:00
22050a3ed0
esp8266/help: Add cheatsheet for basic WiFi configuration.
2016-04-29 00:34:08 +03:00
b639ce27c7
esp8266/help: Implement help() builtin.
2016-04-29 00:17:11 +03:00
af554b4ba2
esp8266/modnetwork: Make WLAN.ifconfig() read/write.
...
Allow setting ip, netmask, gw and dns server (also, allows getting dns).
For docs see: https://github.com/micropython/micropython/commit/06deec9
2016-04-28 23:51:04 +03:00
193c62226c
esp8266/README: Add recently required step of 'make axtls'.
2016-04-28 21:42:04 +03:00
Paul Sokolovsky
misterdanb
Torwag
Robert HH
Damien George
Noah Rosamilia
Mike Causer
Aex Aey
bsdfox