41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
c44c99398d
Merge pull request #3983 from dhalbert/6.1.0-shrink-builds
...
shrink some de_DE builds
2021-01-12 20:19:43 -06:00
8d24e72981
Merge pull request #3978 from ladyada/neotrinkey
...
samd21 board with only 4 neopixels + two touchpads
2021-01-12 20:19:01 -06:00
4b30412871
shrink some de_DE builds
2021-01-12 18:23:37 -05:00
4be5e914ac
Merge pull request #3966 from dhalbert/samd-dac-channels
...
fix atmel-samd DAC channel selection logic
2021-01-12 13:01:50 -05:00
748d44892d
fix some precommit complaints
2021-01-12 12:55:02 -05:00
f7f97ae1b7
samd21 board with only 4 neopixels + two touchpads
2021-01-12 12:50:08 -05:00
452d66dd0e
Update ports/atmel-samd/common-hal/analogio/AnalogOut.c
...
whoops, yes!
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-11 19:12:52 -05:00
10093d37c5
Merge pull request #3960 from dhalbert/pwmout-tcc-resolution
...
Look up TCC resolution as necessary
2021-01-11 15:33:59 -08:00
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
316bd0c72d
fix atmel-samd DAC channel selection logic
2021-01-10 19:22:15 -05:00
908e02439d
Look up TCC resolution as necessary
2021-01-09 15:04:23 -05:00
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
39c166ba6a
update tinyusb; _ticks_enabled only for SAMD21
2021-01-08 13:30:11 -05:00
9a1d864331
overflowed tick counter needs 64 bits everywhere
2021-01-06 11:09:06 -05:00
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
bbd4de33d1
Add adafruit_bus_device to CPX builds.
2021-01-04 15:53:39 -05:00
9286f26831
Added CP Dotstart Lib to Build
...
Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED.
2021-01-03 10:42:58 -06:00
83c6774a44
Revert "Removing frozen libs"
...
This reverts commit 23ed3ef971
2020-12-30 10:55:28 -06:00
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
2729666d82
SAMD51: change of DAC power setting
...
Fixes wrong DAC output levels at high data rate
closes adafruit#3796
2020-12-25 17:53:43 +01:00
eb65765d52
Merge pull request #3867 from dhalbert/frequencyin-fix-6.0.x
...
FrequencyIn: do not raise in interrupt handler
2020-12-23 12:14:16 -08:00
89079039ad
FrequencyIn: do not raise in interrupt handler
2020-12-22 18:54:42 -05:00
f202eb734a
Merge pull request #3842 from StackRduino/main
...
add stackrduino_m0_pro
2020-12-18 12:33:34 -05:00
8f9cd7075e
Merge pull request #3752 from jepler/gcc10
...
build: Update to gcc10
2020-12-17 11:03:40 -05:00
7afa1a1d76
Update mpconfigboard.mk
...
reduced to CFLAGS_INLINE_LIMIT = 35 for tranaslations
2020-12-17 22:47:01 +08:00
06022a5e91
Update mpconfigboard.mk
...
changed CFLAGS_INLINE_LIMIT = 55
2020-12-17 21:58:24 +08:00
81ff95a8eb
Add files via upload
2020-12-17 20:29:54 +08:00
bc95c7f219
Delete board.c
2020-12-17 17:08:52 +08:00
f3fb014166
Delete mpconfigboard.h
2020-12-17 17:08:50 +08:00
1284418fa7
Delete mpconfigboard.mk
2020-12-17 17:08:48 +08:00
736c0d4c3d
Delete pins.c
2020-12-17 17:08:46 +08:00
0a7c74230c
Update mpconfigboard.mk
...
updated for 6.1
2020-12-17 16:26:54 +08:00
109e147b46
Update board.c
...
updated path to board.h
2020-12-17 16:22:47 +08:00
23ad9c7402
Update mpconfigboard.h
...
removed whitespace
2020-12-17 15:17:04 +08:00
3d9e4958c5
Add files via upload
2020-12-17 14:24:24 +08:00
f3b7cd6a5d
Delete pins.c
2020-12-17 14:24:07 +08:00
70739ff639
Update pins.c
2020-12-17 13:11:53 +08:00
fac0bf1db8
Add files via upload
2020-12-17 12:37:32 +08:00
4521dfb732
squeeze some smaller boards
2020-12-15 13:23:49 -05:00
fb33c4e1c0
-ftree-vrp better diagnostics on -Os builds; -fno-inline-functions for -O2; fix struct init in HCI bleio
2020-12-15 12:23:56 -05:00
97947b4fe9
shrink bast_pro_mini_m0; use proper flex-array syntax
2020-12-14 22:07:54 -05:00
6abe3cd0ef
-Os for SAMD51; fix CSUPEROPT typo
2020-12-14 18:57:31 -05:00
fe32dd08b8
Update Big Honking Button configuration to support its newest board revision.
...
v5 of the BHB board has:
* GD25Q64C instead of the GD25Q16C.
* Pin PB10 tied to ground for board revision detection.
2020-12-12 19:16:35 -05:00
344d3c59cb
Merge branch 'main' into msgpack
2020-12-11 11:10:30 -08:00
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
1130b80e2a
Merge pull request #3612 from gamblor21/bus_device
...
Moving Adafruit_CircuitPython_BusDevice to core
2020-12-02 13:23:02 -08:00
608c98501b
Merge remote-tracking branch 'adafruit/main' into msgpack
2020-12-02 13:10:39 -08:00
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
cb863e4c5c
Added to partial builds where frozen removed
2020-12-01 22:19:48 -06:00
59c3e25168
disable on boards tight on memory. add stddef.h to imports (not actually needed).
2020-12-01 18:39:24 -08:00
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
237385798c
Merge branch 'main' into bus_device
2020-12-01 15:47:16 -06:00
a975ef4971
Merge pull request #3695 from cwalther/movable
...
Add movable supervisor allocations
2020-11-30 16:00:55 -08:00
98cf7f67d4
Merge pull request #3773 from dhalbert/no-samd21-complex-arithmetic
...
Disable complex arithmetic on SAMD21 builds to make space
2020-11-30 13:47:56 -08:00
dbfabddf58
rename ESP TX and RX pins; remove support
2020-11-30 11:11:04 -05:00
9768951a2a
Disable complex arithmetic on SAMD21 builds to make space
2020-11-29 15:34:38 -05:00
848eb28132
esp-uart-pins
2020-11-28 14:52:56 -05:00
c7404a3ff8
Add movable allocation system.
...
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
28d9e9186e
Disable complex arithmetic on SAMD21 builds to make space
2020-11-28 10:12:46 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
e778fc1f87
Merge pull request #3741 from hathach/fix-cdc-connection-race
...
update tinyusb to fix cdc connection race
2020-11-24 19:11:41 -06:00
8364734ba3
Merge pull request #3749 from skerr92/add-cpsapling-spiflash
...
Add cpsapling spiflash
2020-11-24 15:22:21 -08:00
c451b22255
Disable 3-arg pow() function on m0 boards
...
`pow(a, b, c)` can compute `(a ** b) % c` efficiently (in time and memory).
This can be useful for extremely specific applications, like implementing
the RSA cryptosystem. For typical uses of CircuitPython, this is not an
important feature. A survey of the bundle and learn system didn't find
any uses.
Disable it on M0 builds so that we can fit in needed upgrades to the USB
stack.
2020-11-24 16:54:33 -06:00
686edcef3f
fixing PID issues with CI Test (whoops)
2020-11-24 07:41:32 -05:00
e5cee98977
removing icy tree files/directory
2020-11-23 19:31:06 -05:00
2635132ce5
adding 'haxpress' kind of build for CP Sapling for use with SPI Flash
2020-11-23 19:21:12 -05:00
491e314799
Merge pull request #3718 from jepler/epd-rotation
...
EPaperDisplay: add rotation property
2020-11-23 15:04:26 -08:00
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
1c92b1bf61
forgot to run pre-commit local
2020-11-20 15:35:52 -05:00
c4f4cdd8c1
readding cp_sapling directory
2020-11-20 15:31:49 -05:00
29e91424d4
removing cp sapling temporarily to read
2020-11-20 15:29:35 -05:00
b69bbfa3d6
fixed issues with trailing whitespace check
2020-11-20 15:17:44 -05:00
0a06530d52
adding CP-Sapling
2020-11-20 15:06:57 -05:00
aaca3eccf1
samd: PDMIn: Reduce code unrolling on samd21 only
...
Instead of unrolling the code 16 times, unroll it 4 times and loop
over it 4 times. This gives the same 16 iterations, but at an expense
of less flash space.
2020-11-19 16:19:37 -06:00
0556f9f851
Revert "samd21: Enable terse error reporting on resource constrained chip family"
...
This reverts commit 9a642fc049
2020-11-19 15:12:56 -06:00
9a642fc049
samd21: Enable terse error reporting on resource constrained chip family
...
This reclaims over 1kB of flash space by simplifying certain exception
messages. e.g., it will no longer display the requested/actual length
when a fixed list/tuple of N items is needed:
if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
mp_raise_ValueError(translate("tuple/list has wrong length"));
} else {
mp_raise_ValueError_varg(translate("requested length %d but object has length %d"),
(int)len, (int)seq_len);
Other chip families including samd51 keep their current error reporting
capabilities.
2020-11-18 20:37:36 -06:00
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
bb77f1d130
wip: initial code changes, starting from @tannewt's sleepio branch
2020-11-16 11:56:20 -05:00
bda3267432
Save flash space
...
* No weak link for modules. It only impacts _os and _time and is
already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
M0 Express.
* Change ejected default to false to move it to BSS. It is set on
USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
RAM.
2020-11-13 18:57:52 -08:00
68eb809fbf
Update parallel bus signatures
2020-11-13 18:57:52 -08:00
c9952798fb
Merge pull request #3683 from BHDynamics/dynossat_edu
...
Rename pins on dynossat_edu_eps to make them the same as the Arduino core
2020-11-12 12:33:16 -08:00
aa68b17223
Freed some more space
2020-11-12 13:26:26 +01:00
9774736a50
Rename pins to make them the same as the Arduino core
2020-11-12 12:30:34 +01:00
23ed3ef971
Removing frozen libs
2020-11-11 11:36:04 -06:00
f61c4e62c1
Removing from smaller builds
2020-11-11 10:24:33 -06:00
36a8828fa3
Merge pull request #3632 from dhalbert/add-binascii
...
add binascii to most builds
2020-11-05 16:16:41 -05:00
e02539bdf5
Merge pull request #3633 from ITACAInnovation/patch-2
...
Update pins.c
2020-11-04 10:30:09 -08:00
ca935c0daf
Update pins.c
...
Changed builtin to standard
2020-11-03 21:22:19 +01:00
441c2c41fb
Merge pull request #3641 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-11-03 09:46:44 -08:00
1f7a3f0dfa
Rev C Feather M4 CAN pin changes
2020-11-02 15:28:30 -05:00
041c2a9f61
.../boards/bdmicro_vina_d51: PAD updates for better resource flexibility.
2020-11-02 08:35:25 -05:00
4e52757f26
Update pins.c
...
Added LED, BOOST_EN and VEXT_SELECT pins.
2020-11-01 22:22:55 +01:00
72b829dff0
add binascii to most builds
2020-11-01 14:52:03 -05:00
1762a36438
restore analogio to feather_m0_rfm9x/rfm69 builds
2020-11-01 05:46:13 -05:00
144eb131ae
Merge pull request #3627 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-10-31 12:28:20 -04:00
gamblor21
Jeff Epler
Dan Halbert
Dan Halbert
lady ada
Scott Shawcroft
foamyguy
iot49
Kattni Rembor
Benjamin Shockley
Jeff Epler
microDev
Uwe Gartmann
Hany Elkomy
Thea Flowers
Scott Shawcroft
Bernhard Boser
Mark
Christian Walther
Seth Kerr
Enrique Casado
ITACA Innovation S.R.L
Brian Dean
Jerry Needell