Commit Graph

300 Commits

Author SHA1 Message Date
Dominic Davis-Foster
e1046b1050
Add support for the 16MB WeAct Studio Pico 2022-11-14 14:04:07 +00:00
Jeff Epler
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.

Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.

Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.

```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```

Closes: #7020
2022-11-08 09:37:15 -06:00
Petr Sedlacek
f3ec46bbb5 Add missing pin definitions for 42. Keebs Frood 2022-11-04 15:33:16 +01:00
Jeff Epler
403a5b2681
Merge pull request #7126 from jepler/scorpio
add feather rp2040 scorpio
2022-11-02 14:47:40 -05:00
Jeff Epler
7545e02a8e
add feather rp2040 scorpio 2022-10-26 10:05:37 -05:00
Petr Sedlacek
bd7f0e23d7 Adds support for the 42. Keebs Frood RP2040 board
https://github.com/piit79/Frood
2022-10-25 16:40:32 +02:00
Kattni Rembor
5ea8b75e17 Add STEMMA_I2C() object to Picos for Cowbells. 2022-10-24 16:27:32 -04:00
Jeff Epler
3b3fe44174
implement hashlib for picow 2022-10-13 20:42:50 -05:00
Dan Halbert
e19abef57e forgot to add these! 2022-10-11 13:12:43 -04:00
Dan Halbert
851f8a188d Merge remote-tracking branch 'adafruit/main' into HEAD 2022-10-11 12:21:59 -04:00
Jeff Epler
f882571366
pico w: pins improvements
Closes: #7017

 * Remove the 'GP23' alias for CYW1
 * Remove the 'CYW0' alias for CYW0
 * Switch VBUS_SENSE to CYW2, remove 'GP24' alias

Code that wants to use SMPS_MODE, VBUS_SENSE and LED while being
portable to the W and non-W variants should use those names, not alias
names.

 * Remove A3 / VOLTAGE_MONITOR

Right now this cannot be used. The ability to check the voltage monitor
should be added back in some fashion in the future.
2022-10-07 08:48:36 -05:00
Jeff Epler
644d293641
Fix CIRCUITPY drive offset in flash correctly, accounting for NVM
.. and fix nvm to read/right the correct area.

.. putting a comment in link.ld to explain it all

Closes #7012
2022-10-06 12:39:46 -05:00
Jeff Epler
07cd2ff065
restore 4kB gap pending resolution of #7011 2022-10-06 11:20:48 -05:00
Jeff Epler
6e2c24083a
switch flash split to leave 512kB for CIRCUITPY 2022-10-06 10:12:22 -05:00
Jeff Epler
dcb650c513 pico w: add ssl module
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
2022-10-05 13:12:43 -04:00
Jeff Epler
2bd50673b6
Finish adapting flash storage size
Before this, CIRCUITPY would start at 1MB anyway. This appeared to work
only because I hadn't checked the actual size of the CIRCUITPY drive,
and because until now the flash hadn't actually crossed that 1MB
boundary into CIRCUITPY storage.

WARNING: on pico_w, upgrading/downgrading CircuitPython across this commit
boundary will erase the CIRCUITPY filesystem. After this commit,
switching between pico and pico_w firmware will erase the CIRCUITPY
filesystem
2022-10-05 10:02:38 -05:00
Jeff Epler
a3bcfd6911
Add pin_CYW1 for SMPS_MODE 2022-09-29 10:54:06 -05:00
Jeff Epler
2dd6df9d93
better to explain why this file has no useful content 2022-09-28 15:19:06 -05:00
Jeff Epler
3d76aa00f5
implementations not needed 2022-09-28 14:38:13 -05:00
Jeff Epler
a7a1bd7880
Implement DNS resolution
```
>>> s = socketpool.SocketPool(wifi.radio)
>>> s.getaddrinfo("google.com", 80)
[(0, 0, 0, '', ('142.250.81.206', 80))]
```
2022-09-28 10:06:33 -05:00
Jeff Epler
6c3cdceb45
Implement scan, connect, ping
My pings go out, and then they come back

```py
import os
import wifi
import ipaddress

wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out 2022-09-28 10:06:33 -05:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5 Use MP_WEAK for default board.c routines 2022-09-08 07:36:50 -04:00
Pontus Oldberg
9a937e6ea3 Added challenger_rp2040_wifi_ble board. 2022-09-06 09:37:21 +02:00
Pontus Oldberg
59fb3fbbd6
Merge branch 'adafruit:main' into main 2022-09-01 10:35:13 +02:00
arturo182
23f2b62196 Add the Solder Party BBQ20KBD board 2022-08-17 20:44:23 +02:00
Dan Halbert
41bcd7b260 Remove support for auto-brightness 2022-08-09 22:40:21 -04:00
takayoshiotake
5ce3778d75 Add custom board: Octave RP2040 2022-08-09 22:19:38 +09:00
Pontus Oldberg
c884194c92 Fixed incorrect PID. 2022-08-03 08:45:39 +02:00
Pontus Oldberg
03181fe362 Adds support for the Challenger RP2040 SubGHz board. 2022-07-31 10:36:04 +02:00
David Glaude
2baf3455bd
Add board.LED (alias of board.LED_R part of RGB)
Totally untested change (will try with the artifact), but I think every board should have a board.LED if possible to be able to use the learn guide basic instruction.
2022-07-28 16:46:56 +02:00
Scott Shawcroft
acdfda7d0e
Merge pull request #6624 from bwshockley/bwshockley-figpi
Add raspberrypi port - figpi
2022-07-25 15:23:52 -07:00
ViktorWiz
ae6c0e347c Add WIZNet W5500-EVB-Pico 2022-07-22 17:31:58 +09:00
Benjamin Shockley
dc686545c2
Update pins.c
Minor whitespace change.
2022-07-20 15:40:43 -05:00
Benjamin Shockley
e9eeaf2096
Update mpconfigboard.h
Moved UART to pins 24/25.
2022-07-20 12:35:40 -05:00
Benjamin Shockley
d01b65dd32
Create pins.c 2022-07-20 12:35:08 -05:00
Benjamin Shockley
3861a97f38
Create pico-sdk-configboard.h 2022-07-20 12:18:22 -05:00
Benjamin Shockley
3647cfa424
Create mpconfigboard.mk 2022-07-20 12:17:39 -05:00
Benjamin Shockley
d2865764ca
Create mpconfigboard.h
Added file.
2022-07-20 12:12:31 -05:00
Benjamin Shockley
21af8f42cc
Create board.c 2022-07-20 11:11:49 -05:00
Xu Hao
be3482ff05 Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed 2022-07-11 16:51:06 +08:00
Xu Hao
1599844b82 Add some frozen libraries to elecfreaks_picoed 2022-06-29 15:03:29 +08:00
Patrick Van Oosterwijck
0b80c62400
Merge branch 'adafruit:main' into rp2040-shim 2022-06-22 11:40:02 -05:00
Patrick Van Oosterwijck
ad56a16c2d Add board Silicognition LLC RP2040-Shim 2022-06-14 11:28:41 -06:00
Omer Kilic
9fbad229c0 Add custom board: Electrolama minik (RP2040) 2022-06-14 15:51:10 +01:00
Pontus Oldberg
5c13f844c7 Fixed pre-commit trailing whitespace 2022-06-08 16:43:49 +02:00
Pontus Oldberg
91000ea294 Adds support for Challenger RP2040 LoRa boards 2022-06-08 16:38:21 +02:00
Scott Shawcroft
2baf476530
Merge pull request #6463 from adafruit/7.3.x
Catch main up to 7.3.x
2022-06-06 11:58:05 -07:00
Nathan Young
2f0d82a50b Disable board.SPI() for Challenger NB RP2040 WiFi
This was done as a result of an issue with the SPI pin mappings.
Please refer to the following for additional information: https://ilabs.se/challenger-rp2040-wifi-spi-bug
2022-06-06 09:52:23 +02:00