1ef4e3c738
Add Adafruit TFT Experiment (rev A)
...
There will be a revision but get the basics in for now.
This successfully displays on a TL040HDS20-B1502A screen with:
```
import board
from framebufferio import FramebufferDisplay
from dotclockframebuffer import DotClockFramebuffer
from displayio import release_displays
tft_pins = board.TFT
tft_timings = {
"frequency": 6_500_000,
"width": 720,
"height": 720,
"hsync_pulse_width": 20,
"hsync_front_porch": 40,
"hsync_back_porch": 40,
"vsync_pulse_width": 10,
"vsync_front_porch": 40,
"vsync_back_porch": 40,
"hsync_idle_low": False,
"vsync_idle_low": False,
"de_idle_high": False,
"pclk_active_high": False,
"pclk_idle_high": False,
}
release_displays()
fb = DotClockFramebuffer(**tft_pins, **tft_timings)
disp = FramebufferDisplay(fb)
```
2023-08-30 15:05:07 -05:00
7dbf9a9b56
fix vprintf_adapter build error
2023-08-30 11:34:01 -05:00
9dcc0b5056
fix those pesky pid/vid duplicates
2023-08-30 10:58:52 -05:00
fb15c7ca51
Fix timings table & remove redundant comment
2023-08-30 10:50:16 -05:00
9e0993af5b
Add espressif esp32s3 lcd devkit
...
This is not working/tested. The display requires an initialization sequence,
and its SPI bus is on the other side of an I2C GPIO expander making things
more difficult.
2023-08-30 10:31:47 -05:00
494aee62b3
Add makerfabs 7" 800x480 TFT
...
this is working, though it has to be down-clocked to 6.5MHz to prevent
display glitching
2023-08-30 10:30:54 -05:00
ed9cacf41d
Add DotClockFramebuffer
2023-08-30 10:30:15 -05:00
b20e211d29
Merge pull request #8293 from fonix232/port/esp32/m5paper
...
Add support for M5Stack M5Paper
2023-08-28 12:53:37 -07:00
b0967cb1a4
Use QSTR_GLOBAL_REQUIREMENTS to give explicit dependency for qstr generation
...
I investigated and found that this seems to be the best way to specify
a file that must be generated before "qstr processing" can occur.
Closes #8337
2023-08-27 16:16:40 -05:00
ab70f8eace
Merge remote-tracking branch 'adafruit/main' into i2s_mclk
2023-08-24 15:07:14 -07:00
4f7e66df08
fix: pre-commit
2023-08-22 15:17:40 +01:00
2ec145ba6c
fix: Minor fixes for M5Paper
2023-08-22 11:44:52 +01:00
d62bf6631b
Use a different way to force building sdkconfig early
...
the `Makefile:...` version broke the shared bindings matrix generation, as
it would fail if esp-idf wasn't in the environment (and we wouldn't want
it to do that much work anyway)
2023-08-21 20:48:42 -05:00
44c26d9d41
Ensure sdkconfig.h is built early, by making Makefile depend on it
...
Here's why this helps fix the build error:
If this file does not exist or is out of date, then it is generated
and then the Makefile is re-read.
I don't know why this worked before but stopped now; it must have
to do with the rework of header generation in the MP build system.
2023-08-20 11:08:43 -05:00
e74ef8b960
ringbuf_alloc no longer has a long-lived argument
2023-08-20 10:15:56 -05:00
a3a9c7a098
fix typo
2023-08-20 10:15:55 -05:00
e43c2fb7ba
pre-commit uncrustify
2023-08-18 22:53:14 -04:00
d9ed21ea07
pre-commit
2023-08-18 13:30:45 -04:00
6851faacaa
Merge remote-tracking branch 'adafruit/main' into merge-micropython-v1.19.1
2023-08-18 13:29:39 -04:00
37352cf7ec
fix: Apply pre-commit patch
2023-08-18 11:22:26 +01:00
37d807509f
port: Add M5Stack M5Paper board target
2023-08-17 21:22:26 +01:00
8c5c73df38
Add I2S MCLK support to iMX RT
2023-08-17 11:39:14 -07:00
3012c275e7
Add SD_CS pin.
2023-08-15 18:09:42 -04:00
d582407b06
pre-commit fixes
2023-08-14 00:59:22 -04:00
2171e67c1b
merge latest adafruit/main
2023-08-13 19:43:54 -04:00
27c7807693
silabs build needs work; other builds are working
2023-08-13 19:05:16 -04:00
10b94796c0
wip; fix more m_malloc and gc_alloc
2023-08-11 00:30:34 -04:00
0d2c3c3f08
wip: continuing compilation fixes; mp_obj_alloc everywhere
2023-08-07 20:45:57 -04:00
84d8224a54
set reserved psram for pycamera
2023-08-04 08:38:07 -05:00
465d1c673e
wip
2023-08-03 23:29:00 -04:00
9cc4b4cd37
Merge pull request #8245 from jepler/esp32-camera-backlight-solarize
...
pycamera: backlight, solarize
2023-08-02 10:00:21 -07:00
f7cc20e936
Update pins.c
2023-08-02 11:01:44 -04:00
f9b98ce54d
Update pins.c
2023-08-02 10:57:46 -04:00
b88e359b00
Update pins.c
2023-08-02 10:41:46 -04:00
37dbe3e24a
Update pins.c
2023-08-02 10:32:40 -04:00
94ed725fd3
Update mpconfigboard.h
2023-08-02 10:24:58 -04:00
4e01e6bbe5
adafruit-esp32s3-camera: set up backlight at boot & add solarize
...
the backlight situation will be revisited with the next board prototype,
but it's good to prove this can be done.
Depends on https://github.com/adafruit/esp32-camera/pull/6 which should
be merged before this.
2023-08-02 08:09:13 -05:00
2b0f1cd087
espressif: fix dependencies in esp-idf modules
...
while developing esp-camera I had the problem that firmware.elf was
not regenerated if the only file I edited was in the esp32-camera
submodule.
By telling make that $(IDF_CMAKE_TARGETS), the list of .a fliles
produced by ninja-building esp-idf, depend on esp-idf-stamp and that
firmware.elf in turn depends on these files, the ninja build is re-run
on each make, which is reasonably quick if nothing needs to be rebuilt.
2023-08-02 07:52:45 -05:00
8baff0bf88
Merge pull request #8133 from dronecz/main
...
Add ES3ink board definition
2023-08-01 13:31:46 -07:00
0bf50d2d6e
Merge pull request #8215 from makermelissa/adafruit-metro-esp32s3
...
Added initial Adafruit Metro ESP32-S3
2023-08-01 13:30:06 -07:00
0d4bc8c163
initial v1.19.1 merge; not compiled yet
2023-08-01 13:50:05 -04:00
272a2dcdb0
Merge pull request #8218 from jepler/esp32-camera
...
Update the camera board to use ESP32-S3 microcontroller
2023-07-31 14:48:50 -05:00
d5daa7ad27
boards/beetle-esp32-c3: fix sdkconfig minor typo.
...
Fixes https://github.com/adafruit/circuitpython/issues/8239
2023-07-30 22:13:10 -07:00
45b1c42be5
Add D0 and D1
2023-07-27 19:26:37 -07:00
ffb1cf116d
Add D pins
2023-07-27 16:46:15 -07:00
3d210bfa45
Merge branch 'main' of https://github.com/adafruit/circuitpython into adafruit-metro-esp32s3
2023-07-27 16:33:19 -07:00
020e4d2e0c
update camera submodule
2023-07-26 12:55:44 -05:00
46d7771152
tinyuf2 adopted the partition scheme called "1ota"
...
.. which irritated our partition table parser in build_memory_info, so
make it work again.
2023-07-26 09:41:10 -05:00
c516870f89
switch camera to use the no-ota partition scheme
...
this gives us a comfortable few hundred kB flash space left for the app
1398912 bytes used, 763776 bytes free in flash firmware space out of 2162688 bytes (2112.0kB).
2023-07-26 08:38:59 -05:00
9edd8957a1
Add a "4MB without OTA" partition scheme
...
This is needed on the camera board, because we have a lot of code.
2023-07-26 08:38:30 -05:00
Jeff Epler
Scott Shawcroft
Jozsef Kiraly
Dan Halbert
Kattni Rembor
Jeremy Littler
KB Sriram
Melissa LeBlanc-Williams