This commit adds support for using Bluetooth on the unix port via a H4
serial interface (distinct from a USB dongle), with both BTstack and NimBLE
Bluetooth stacks.
Note that MICROPY_PY_BLUETOOTH is now disabled for the coverage variant.
Prior to this commit Bluetooth was anyway not being built on Travis because
libusb was not detected. But now that bluetooth works in H4 mode it will
be built, and will lead to a large decrease in coverage because Bluetooth
tests cannot be run on Travis.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack. This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
mp_irq_init() is useful when the IRQ object is allocated by the caller.
The mp_irq_methods_t.init method is not used anywhere so has been removed.
Signed-off-by: Damien George <damien@micropython.org>
This is consistent with the other 'micro' modules and allows implementing
additional features in Python via e.g. micropython-lib's sys.
Note this is a breaking change (not backwards compatible) for ports which
do not enable weak links, as "import sys" must now be replaced with
"import usys".
Verifies mtime timestamps on files match the value returned by time.time().
Also update vfs_fat_ramdisk.py so it doesn't check FAT timestamp of the
root, because that may change across runs/ports.
Signed-off-by: Damien George <damien@micropython.org>
By setting MICROPY_EPOCH_IS_1970 a port can opt to use 1970/1/1 as the
Epoch for timestamps returned by stat(). And this setting is enabled on
the unix and windows ports because that's what they use.
Signed-off-by: Damien George <damien@micropython.org>
On 32-bit builds these stat fields will overflow a small-int, so use
mp_obj_new_int_from_uint to construct the int object.
Signed-off-by: Damien George <damien@micropython.org>
On ports like unix where the Epoch is 1970/1/1 and atime/mtime/ctime are in
seconds since the Epoch, this value will overflow a small-int on 32-bit
systems. So far this is only an issue on 32-bit unix builds that use the
VFS layer (eg dev and coverage unix variants) but the fix (using
mp_obj_new_int_from_uint instead of MP_OBJ_NEW_SMALL_INT) is there for all
ports so as to not complicate the code, and because they will need the
range one day.
Also apply a similar fix to other fields in VfsPosix.stat because they may
also be large.
Signed-off-by: Damien George <damien@micropython.org>
gettimeofday returns seconds since 2000/1/1 so needs to be adjusted to
seconds since 1970/1/1 to give the correct return value of mp_hal_time_ns.
Signed-off-by: Damien George <damien@micropython.org>
This commit fixes the cases when a TCP socket is in STATE_NEW,
STATE_LISTENING or STATE_CONNECTING and recv() is called on it. It now
raises ENOTCONN instead of a random error code due to it previously
indexing beyond the start of error_lookup_table[].
Signed-off-by: Damien George <damien@micropython.org>
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:
- If there is a trailing comma in a list (eg [], () or function call) then
that list is now written out with one line per element. So remove such
trailing commas where the list should stay on one line.
- Spaces at the start of """ doc strings are removed.
Signed-off-by: Damien George <damien@micropython.org>
So they can be skipped if __rOP__'s are not supported on the target. Also
fix the typo in the complex_special_methods.py filename.
Signed-off-by: Damien George <damien@micropython.org>
The memory operation functions read_mem() and write_mem() create a
temporary buffer on the local C stack for the address bytes with the size
of 4 bytes. This buffer is filled in a loop from the user supplied address
and address length. If the user supplied 'addrsize' is bigger than 32, the
local buffer is overrun.
Fix this by raising an exception for invalid 'addrsize' values.
Signed-off-by: Michael Buesch <m@bues.ch>
A configurable result directory is advantageous because it enables
using a dedicated location, eventually outside of the source tree,
instead of forcing the output files into a fixed directory which might
also contain other files already. For that reason the default output
directory also has been changed to tests/results/.
Replace some usages of paths relative to the current working directory
with absolute paths relative to the tests directory.
Fixes and resulting changes:
- default values of MICROPYTHON and MPYCROSS are absolute paths and
always correct
- likewise, the correct full paths for tools and extmod directories
are appended to sys.path
- printing/cleaning failures works properly since it expects the .exp
and .out files in the tests directory which is also where they
are written to now, plus no more need for changing directories
This fixes#5872 and allows running custom tests which use run-tests
without having to cd to the tests directory first, and the test output
still is in the tests/ directory instead of the current working directory.
Discovery of tests and all skip test logic based on paths relative to
the current working directory remains unchanged which essentially means
that for running most of MicroPython's own tests, run-tests must still
be ran from within it's directory, so document that.
With sleep(0.2) a multiple of sleep(0.1), the order of task 2 and 3
execution is not well defined, and depends on the precision of the system
clock and how fast the rest of the code runs. So change 0.2 to 0.18 to
make the test more reliable.
Also fix a typo of t3/t4, and cancel t4 at the end.
Signed-off-by: Damien George <damien@micropython.org>
This adds an additional optional parameter to gap_scan() to select active
scanning, where scan responses are returned as well as normal scan results.
This parameter is False by default which retains the existing behaviour.
The READ_REQUEST callback is handled as a hard interrupt (because the BLE
stack needs an immediate response from it so it can continue) and so calls
to Python require extra protection:
- the caller-owned tuple passed into the callback must be separate from the
tuple used by other callback events (which are soft interrupts);
- the GC and scheduler must be locked during callback execution.
This commit adds support for modification time of files on littlefs v2
filesystems, using file attributes. For some background see issue #6114.
Features/properties of this implementation:
- Only supported on littlefs2 (not littlefs1).
- Uses littlefs2's general file attributes to store the timestamp.
- The timestamp is 64-bits and stores nanoseconds since 1970/1/1 (if the
range to the year 2554 is not enough then additional bits can be added to
this timestamp by adding another file attribute).
- mtime is enabled by default but can be disabled in the constructor, eg:
uos.mount(uos.VfsLfs2(bdev, mtime=False), '/flash')
- It's fully backwards compatible, existing littlefs2 filesystems will work
without reformatting and timestamps will be added transparently to
existing files (once they are opened for writing).
- Files without timestamps will open correctly, and stat will just return 0
for their timestamp.
- mtime can be disabled or enabled each mount time and timestamps will only
be updated if mtime is enabled (otherwise they will be untouched).
Signed-off-by: Damien George <damien@micropython.org>
Otherwise a task that continuously awaits on a large negative sleep can
monopolise the scheduler (because its wake time is always less than
everything else in the pairing heap).
Signed-off-by: Damien George <damien@micropython.org>
As per CPython behaviour, compile(stmt, "file", "single") should create
code which prints to stdout (via __repl_print__) the results of any
expressions in stmt.
Signed-off-by: Damien George <damien@micropython.org>
The existing implementation of mkdir() in this file is not sophisticated
enough to work correctly on all operating systems (eg Mac can raise
EISDIR). Using the standard os.makedirs() function handles all cases
correctly.
Signed-off-by: Damien George <damien@micropython.org>
Prior to this commit, pyboard.py used eval() to "parse" file data received
from the board. Using eval() on received data from a device is dangerous,
because a malicious device may inject arbitrary code execution on the PC
that is doing the operation.
Consider the following scenario:
Eve may write a malicious script to Bob's board in his absence. On return
Bob notices that something is wrong with the board, because it doesn't work
as expected anymore. He wants to read out boot.py (or any other file) to
see what is wrong. What he gets is a remote code execution on his PC.
Proof of concept:
Eve:
$ cat boot.py
_print = print
print = lambda *x, **y: _print("os.system('ls /; echo Pwned!')", end="\r\n\x04")
$ ./pyboard.py -f cp boot.py :
cp boot.py :boot.py
Bob:
$ ./pyboard.py -f cp :boot.py /tmp/foo
cp :boot.py /tmp/foo
bin chroot dev home lib32 media opt root sbin sys usr
boot config etc lib lib64 mnt proc run srv tmp var
Pwned!
There's also the possibility that the device is malfunctioning and sends
random and possibly dangerous data back to the PC, to be eval'd.
Fix this problem by using ast.literal_eval() to parse the received bytes,
instead of eval().
Signed-off-by: Michael Buesch <m@bues.ch>
Prior to this commit, if you configure a pin as an output type (I2C in this
example) and then later configure it back as an input, then it will report
the type incorrectly. Example:
>>> import machine
>>> b6 = machine.Pin('B6')
>>> b6
Pin(Pin.cpu.B6, mode=Pin.IN)
>>> machine.I2C(1)
I2C(1, scl=B6, sda=B7, freq=420000)
>>> b6
Pin(Pin.cpu.B6, mode=Pin.ALT_OPEN_DRAIN, pull=Pin.PULL_UP, af=Pin.AF4_I2C1)
>>> b6.init(machine.Pin.IN)
>>> b6
Pin(Pin.cpu.B6, mode=Pin.ALT_OPEN_DRAIN, af=Pin.AF4_I2C1)
With this commit the last print now works:
>>> b6
Pin(Pin.cpu.B6, mode=Pin.IN)
Latest versions of Sphinx (at least 3.1.0) do not need the `*` escaped and
will render the `\` in the output if it is there, so remove it.
Fixes issue #6209.
Adds a job to build the zephyr port in CI using the same docker container
that the zephyr project uses for its own CI.
Always make clean zephyr builds to ensure we don't just rebuild C code, but
we also rebuild Kconfig and dts. This is required when switching between
boards, which have different Kconfigs and device trees.
Uses the tagged zephyr 2.3.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Include storage/flash_map.h unconditionally so we always have access to the
FLASH_AREA_LABEL_EXISTS macro, even if CONFIG_FLASH_MAP is not defined.
This fixes a build error for the qemu_x86 board:
main.c:108:63: error: missing binary operator before token "("
108 | #elif defined(CONFIG_FLASH_MAP) && FLASH_AREA_LABEL_EXISTS(storage)
| ^
../../py/mkrules.mk:88: recipe for target 'build/genhdr/qstr.i.last' failed
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
mp_reader_new_file() is used to read in files for importing, either .py or
.mpy files, for the lexer and persistent code loader respectively. In both
cases the file should be opened in raw bytes mode: the lexer handles
unicode characters itself, and .mpy files contain 8-bit bytes by nature.
Before this commit importing was working correctly because, although the
file was opened in text mode, all native filesystem implementations (POSIX,
FAT, LFS) would access the file in raw bytes mode via mp_stream_rw()
calling mp_stream_p_t.read(). So it was only an issue for non-native
filesystems, such as those implemented in Python. For Python-based
filesystem implementations, a call to mp_stream_rw() would go via IOBase
and then to readinto() at the Python level, and readinto() is only defined
on files opened in raw bytes mode.
Signed-off-by: Damien George <damien@micropython.org>
