Commit Graph

48 Commits

Author SHA1 Message Date
Dan Halbert 844cd17f03 delay first serial write by 50ms 2022-10-11 23:02:14 -04:00
Dan Halbert 0cd37376a0 finish status bar internal simplification 2022-09-27 15:14:40 -04:00
Dan Halbert e5f2f0be25 simplify suppressing status bar writes 2022-09-25 00:00:37 -04:00
Dan Halbert 52080e24eb status bar control 2022-08-30 15:23:44 -04:00
Scott Shawcroft d6344812e8
Lots of web workflow, C3 and title bar fixes
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
  disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
  explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
  more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
  happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
  now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548.
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
Scott Shawcroft ac460dd1e1
Merge branch 'main' into esp32 2022-07-13 15:30:53 -07:00
Scott Shawcroft 07b2697ae3
WIP websocket to serial 2022-07-01 16:57:10 -07:00
Dan Halbert 8bb369cac5 refactor debug UART to console UART; get working on ESP32 2022-06-30 23:16:46 -04:00
Dan Halbert b0efd130c9 ESP32 REPL working through debug UART 2022-06-29 23:19:36 -04:00
Scott Shawcroft f5d90fc84f
Switch to port_serial_* hooks
This makes it easier to integrate port specific serial alongside
the common approaches.
2022-03-22 19:40:33 -07:00
Scott Shawcroft 91468ed36b
Don't crash on early debug print 2022-03-08 17:55:21 -08:00
Scott Shawcroft 96f5eec2ee
Add Teensy 4.1 power pin and fix SWD for DEBUG=1 2022-03-08 17:17:07 -08:00
Scott Shawcroft 83593a1558
Start of USB host API
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)

Related to #5986
2022-03-07 18:07:25 -08:00
Timon a1052d5f73
Initial broadcom port for Raspberry Pi
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.

There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
  themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
  mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
  and unnecessary for the vast majority of builds.

Fixes #4314
2021-11-22 14:54:44 -08:00
Scott Shawcroft 0fadf028ef
Create first BLE-only board, Micro:Bit v2
This fixes build issues with USB off, tweaks the README to allow
for BLE-only boards and adds the Micro:Bit v2 definition.

Fixes #4546
2021-07-14 09:55:51 -07:00
Scott Shawcroft 3177973843
Add BLE serial service 2021-06-25 15:00:10 -07:00
EmergReanimator 2b64b1d335 [resolves #4771] DEBUG UART supported on ATMSAME5x 2021-05-17 21:22:24 +02:00
Dan Halbert adc3d7d55e update Python API according to review comments 2021-05-03 22:29:02 -04:00
Dan Halbert 71a8cadb09 working! 2021-04-29 22:26:38 -04:00
Dan Halbert f06d54524d merge from adafruit 2021-04-28 23:48:26 -04:00
Dan Halbert 8500e846c6 partially working 2021-04-27 23:53:23 -04:00
jun2sak 7accb8b173 modify copyright notice. 2021-04-25 19:57:21 +09:00
jun2sak a17fcb6d1a add copyright notice. remove obsolete comments. 2021-04-25 19:19:11 +09:00
Scott Shawcroft eacb7dbe58
Don't block serial output in interrupt
The interrupt may have a higher priority than the serial output's
(USB) interrupt and may never make room. This makes prints from
interrupts (like the BLE event calls) best effort for what can be
queued up. The rest of the output will be dropped.
2021-04-09 12:56:03 -07:00
Lucian Copeland 15764b4c24 Merge remote-tracking branch 'upstream/main' into nrf52-sleep 2021-04-09 13:48:45 -04:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
jun2sak 9661d67cd3 replace MY_DEBUG_UART -> NRF_DEBUG_PRINT. 2021-02-25 01:49:57 +09:00
jun2sak 105042e870 move dump_xxx functions to debug_uart.c. 2021-02-23 12:22:33 +09:00
jun2sak 1da8b9900a Merge branch 'main' into nrf52-sleep 2021-02-21 13:35:06 +09:00
jun2sak d659c2ce34 move port-specific debug functions from supervisor/shared/serial.c to ports/nrf/supervisor/port.c 2021-02-21 09:55:10 +09:00
jun2sak 26f8f532f1 safe mode fix. 2021-02-21 00:47:07 +09:00
jun2sak e6350ff834 Initial commit. 2021-02-17 20:53:18 +09:00
Dan Halbert d54b5861a3 wip 2021-02-12 19:01:14 -05:00
Dan Halbert f0564b4986 merge from upstream; complicated webusb merge 2021-02-11 18:50:02 -05:00
Dan Halbert 1b7f3d11e7 wip 2021-02-08 10:57:41 -05:00
Kevin Banks fbfb7b68cc Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors. 2021-01-25 20:37:58 -06:00
Dan Halbert 39e1f52e28 wip; not compiling yet 2020-11-19 17:47:12 -05:00
Dan Halbert 345d84ffde improve USB CDC disconnect/reconnect checking 2020-10-30 22:25:50 -04:00
Jeff Epler 28043c94b5 supervisor: Improve serial connection detection
These changes remove the caveat from supervisor.runtime.serial_connected.

It appears that _tud_cdc_connected() only tracks explicit changes to the
"DTR" bit, which leads to disconnects not being registered.

Instead:
 * when line state is changed explicitly, track the dtr value in
   _serial_connected
 * when the USB bus is suspended, set _serial_connected to False

Testing performed (using sam e54 xplained):  Run a program to show
the state of `serial_connected` on the LED:
```
import digitalio
import supervisor
import board

led = digitalio.DigitalInOut(board.LED)
while True:
    led.switch_to_output(not supervisor.runtime.serial_connected)
```

Try all the following:
 * open, close serial terminal program
    - LED status tracks whether terminal is open
 * turn on/off data lines using the switchable charge-only cable
    - LED turns off when switch is in "charger" position
    - LED turns back on when switch is in Data position and terminal is
      opened (but doesn't turn back on just because switch position is
      changed)
2020-09-17 18:32:06 -05:00
Scott Shawcroft d01f5dc0bd
Turn off terminalio for ja and ko
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.

The serial output will work as usual.
2020-08-17 17:17:59 -07:00
Scott Shawcroft 1a0c10c328
Fix debug UART call 2020-06-29 17:15:01 -07:00
Mark Olsson 007c92ee6a Enable showing the console on a debug uart 2020-05-19 02:02:52 +02:00
Dan Halbert e5e9d2ba47 @hathach's changes; check cdc connected during string write 2019-04-04 18:58:35 -04:00
Scott Shawcroft 601a910f4e
More improvements to Terminal:
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
Scott Shawcroft 1a1dbef992
Hook up the terminal based on the first display. 2019-01-31 11:42:14 -08:00
Scott Shawcroft d012fd1553
Only write to usb when its around. 2018-11-09 17:06:55 -08:00
Scott Shawcroft 355abc835e
Fix output overflow and make help translatable 2018-11-09 16:41:08 -08:00
Scott Shawcroft 9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00