Scott Shawcroft
55c80754c7
Merge pull request #3945 from 2bndy5/fix-table-in-a-readme
...
convert esp32s2 port readme to rst
2021-01-07 10:43:34 -08:00
Scott Shawcroft
0b0b476be6
Merge pull request #3940 from caternuson/magtag_accelo_irq_pin
...
Add MagTag accelo IRQ pin
2021-01-07 10:31:33 -08:00
brendan
18122e0455
missed a couple inline code snippets
2021-01-06 15:28:19 -08:00
brendan
092331eee1
convert esp32s2 readme to rst
2021-01-06 15:19:40 -08:00
BennyE
66d87782be
Adding authmode keyword
2021-01-06 23:52:30 +01:00
caternuson
9db0a4f265
add magtag accelo irq pin
2021-01-06 09:17:19 -08:00
Scott Shawcroft
a33359762d
Merge pull request #3903 from anecdata/reasons
...
ESP32-S2: Log all Wi-Fi events & remove unneeded call
2021-01-06 08:41:19 -08:00
anecdata
98c9492a8c
change ESP_EARLY_LOG* to ESP_LOG* throughout event_handler
2021-01-05 18:39:51 -06:00
jerryneedell
ec02102409
implment use of DotStar for staus led
2021-01-04 07:41:25 -05:00
Seon Rozenblum
10f178d162
Fixed incorrect pin assignment on header
...
IO13 is for blue LED
IO14 is the correct pin header between IO18 and IO12
The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c
Silk will be updated on next PCB production run
2021-01-04 10:06:32 +11:00
askpatricw
2ce07209df
changes based on UM's input
2021-01-01 17:23:11 -08:00
askpatricw
220501e159
dupe LED entries
2020-12-31 18:02:44 -08:00
askpatricw
43f93b097f
release and pre-release FeatherS2 NSync
2020-12-31 17:50:41 -08:00
Jeff Epler
5698b8bb0a
Merge pull request #3850 from microDev1/touch-s2
...
Support for Touch Alarm
2020-12-30 16:25:11 -06:00
microDev
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
microDev
b83bdc540d
enable light-sleep functionality
2020-12-31 02:22:20 +05:30
microDev
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
microDev
c7f68022ef
add pretend-to-sleep functionality
2020-12-30 22:11:22 +05:30
anecdata
d537d94a4c
see what we're missing
2020-12-30 09:45:15 -06:00
anecdata
0914b71653
remove unneeded set_config (wrong param; called in connect anyway)
2020-12-30 09:26:25 -06:00
Hugo Dahl
72cad49c69
Fix minor typo in ESP32S2 readme
2020-12-29 22:52:59 -06:00
Jeff Epler
a7542598a0
esp32s2: add I2SOut
2020-12-29 14:46:38 -06:00
Jeff Epler
b40a579d18
esp32s2: espidf: Consistent error checking of esp-idf calls
...
By surrounding most ESP-IDF API calls with this new macro, their failure will
result in a CircuitPython exception.
2020-12-29 14:06:32 -06:00
Jeff Epler
05ba1431c3
esp32s2: espidf: Add IDFError
...
this is an exception class for "generic" IDF errors that don't have
their own exception type.
2020-12-29 14:06:32 -06:00
Jeff Epler
d024df6b06
esp32s2: Use better optimizer flags in debug builds
...
(note that the before and after files both lack trailing newlines; this is
how the esp-idf do)
OPTIMIZATION_DEFAULT is -Og, which enables optimizations that do not
interfere with the debugger:
```
elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT)
list(APPEND compile_options "-Og")
```
2020-12-29 14:06:32 -06:00
Jeff Epler
7401aa8e85
Merge pull request #3888 from microDev1/fix-reset-pin
...
FIX : common_hal_reset_pin()
2020-12-29 10:08:47 -06:00
Scott Shawcroft
c3396e4b49
Merge pull request #3868 from BennyE/wifi-enhancement-countrycode
...
esp32-s2: wifi enhancement to include countrycode
2020-12-28 11:49:41 -08:00
microDev
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
Scott Shawcroft
6c7e6abcfd
Downgrade OTA API for IDF 4.2
2020-12-27 20:30:49 -08:00
BennyE
64bb055700
Updating comment to reflect feedback of espressif from IDFGH-4486 -> works correct as per the protocol
2020-12-24 15:40:53 +01:00
Dan Halbert
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
BennyE
1a6b1b1953
implementing suggested changes
2020-12-24 00:37:37 +01:00
BennyE
e9c9fce15d
Remove debug log messages
2020-12-23 14:59:09 +01:00
Scott Shawcroft
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
Jeff Epler
da8f023665
esp32s2: make flash: use the stub
...
Very long ago, this was apparently not supported in esptool yet, at
least when operating over USB CDC. This now works just fine, and
our esp webtool relies on it as well. It makes flashing faster,
too.
2020-12-22 10:27:42 -06:00
Dan Halbert
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
Dan Halbert
d6df43b943
Merge pull request #3863 from dhalbert/adafruit-prefix
...
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-22 08:02:35 -05:00
Dan Halbert
39ca406a31
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-21 23:32:11 -05:00
BennyE
ae3b440835
more fixes and still with debug
2020-12-22 00:32:48 +01:00
BennyE
2e393ed195
adding debug infos
2020-12-20 22:03:38 +01:00
microDev
ecd7c0878e
expose wake pin parameter and more tweaks
2020-12-19 20:54:36 +05:30
microDev
a60fabdffa
add touch alarm support for esp32s2
2020-12-19 12:56:34 +05:30
microDev
8eaf2b0c19
implement touch alarm
2020-12-18 12:54:36 +05:30
microDev
4512290ba0
Merge branch 'main' into ota-s2
2020-12-18 00:44:00 +05:30
microDev
4863413bc9
rename ota to dualbank
2020-12-18 00:34:56 +05:30
Scott Shawcroft
0dcc659d53
Swap to IDF release/4.2 branch for stability
2020-12-15 18:12:59 -08:00
Scott Shawcroft
1ad49d9a18
Add alarm.pin that wakes on pin level
...
Fixes #3787
2020-12-15 18:12:59 -08:00
hierophect
3ad4b12ce1
Merge branch 'main' into esp-analog-hang
2020-12-15 15:08:30 -05:00
Scott Shawcroft
d076296659
Merge pull request #3816 from dhalbert/sleepmemory
...
alarm.sleep_memory + alarm.wake_alarm
2020-12-14 17:40:02 -08:00
Scott Shawcroft
d6ee17c6fd
Merge pull request #3817 from BennyE/reserve-pins-only-for-debug
...
esp32s2: Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-14 17:32:17 -08:00
Scott Shawcroft
a1f773d9ed
Merge pull request #3819 from BennyE/issue3663
...
Fix for issue 3663 by returning early if no scan was started before s…
2020-12-14 17:11:18 -08:00
Scott Shawcroft
dc473b29e3
Merge pull request #3643 from hierophect/esp32-pin-reset
...
ESP32-S2: Add IDF pin resets to Microcontroller
2020-12-14 17:09:29 -08:00
Lucian Copeland
d793ec2872
Change pinfunc to default of 0 at reset
2020-12-14 14:25:38 -05:00
Lucian Copeland
cac755ba16
Merge remote-tracking branch 'upstream/main' into esp-analog-hang
2020-12-14 13:00:57 -05:00
Lucian Copeland
f15e2d86c0
Reduce samples from 64 to 2
2020-12-14 12:59:20 -05:00
Dan Halbert
e0afa32cfa
use RTC_DATA_ATTR; address review comments
2020-12-14 11:36:54 -05:00
BennyE
210c0ec89c
add country(code) to wifi network objects)
2020-12-13 13:32:12 +01:00
microDev
37ee5e683d
Merge branch 'main' into ota-s2
2020-12-12 05:25:46 +05:30
BennyE
c5c13620f2
Fix for issue 3663 by returning early if no scan was started before stop is issued
2020-12-12 00:49:53 +01:00
BennyE
81c4871fdf
Set DEBUG CFLAG if set in make
2020-12-11 22:11:39 +01:00
BennyE
e3194ad54e
Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-11 20:35:28 +01:00
Dan Halbert
cf938983e9
SleepMemory + set alarm.wake_alarm
2020-12-11 08:10:26 -05:00
microDev
cb35abfd04
add docs, update translation & fix ota.flash()
2020-12-11 01:01:01 +05:30
Dan Halbert
55f4110983
fix typo
2020-12-10 14:16:25 -05:00
Dan Halbert
5964163649
Initial SleepMemory code
2020-12-10 13:03:40 -05:00
microDev
6a4f74946f
reset ota module on every vm run
2020-12-10 16:48:58 +05:30
microDev
07015ad527
add ability to switch boot partition
2020-12-10 16:42:45 +05:30
microDev
bfa2c604ef
add ability to flash in discontinuous chunks
2020-12-10 15:45:25 +05:30
microDev
ed5add37f6
add ability to flash in continuous chunks
2020-12-10 14:36:49 +05:30
microDev
dee86a014b
factor out esp_ota_end
2020-12-10 14:04:24 +05:30
microDev
20c3184c87
re-organize and clean-up
2020-12-10 12:34:56 +05:30
Scott Shawcroft
e14b148e62
Merge pull request #3803 from skieast/fix_i2c_hang_with_wifi
...
Working, tested with two i2c busses
2020-12-09 10:03:31 -08:00
Scott Shawcroft
133013083a
Merge pull request #3808 from tannewt/panic_safe_mode
...
Enter safe mode after panic or brownout
2020-12-08 16:31:22 -08:00
Scott Shawcroft
57101d7da6
Merge pull request #3807 from tannewt/sleep_tweaks
...
Add `board_deinit` for use with sleep
2020-12-08 16:30:41 -08:00
Lucian Copeland
9a5006e241
Remove problematic calloc
2020-12-08 17:43:39 -05:00
Scott Shawcroft
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
Scott Shawcroft
d0a806d797
Enter safe mode after panic or brownout
...
Uses the IDF's reset reason. Does nothing before reset.
Fixes #3389
2020-12-08 11:03:24 -08:00
Scott Shawcroft
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
microDev
2f95c94ad8
esp32s2 - update common_hal_mcu_reset
2020-12-08 18:00:58 +05:30
microDev
602243748b
add ota support for esp32s2
2020-12-08 11:45:00 +05:30
microDev
fc23a0cc8a
implement ota module
2020-12-08 11:30:00 +05:30
Bruce Segal
571c063c2a
Working, tested with two i2c busses
2020-12-07 17:57:54 -08:00
Scott Shawcroft
44b56f76c4
Store safe mode state in the RTC.
...
Also print backtrace before reset when DEBUG. This will help debug
safe mode issues which calls reset.
2020-12-07 16:39:54 -08:00
Scott Shawcroft
22ad76bb48
Merge pull request #3800 from BennyE/wifi-better-logs
...
Enhance debug log for wifi scan, sta_start, sta_stop
2020-12-07 12:32:15 -08:00
Lucian Copeland
c1a2ea27ce
Change to config-based resets
2020-12-07 13:57:47 -05:00
Lucian Copeland
c7b5928833
Fix submodule desync
2020-12-07 11:47:39 -05:00
Lucian Copeland
40a536904f
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-12-07 11:45:27 -05:00
Dan Halbert
169b487509
Include wifi.radio singleton in gc
2020-12-07 11:07:56 -05:00
BennyE
70827ac3da
debug log for wifi scan, start stop
2020-12-06 23:38:04 +01:00
Dan Halbert
348392f8cc
Merge pull request #3775 from tannewt/nina_certs
...
Use nina-fw root certs
2020-12-02 16:13:19 -05:00
Dan Halbert
9b3186b625
Merge pull request #3776 from tannewt/backup_socket_timeout
...
Two minor socket changes
2020-12-02 16:12:29 -05:00
Dan Halbert
31acfedf93
Merge pull request #3780 from tannewt/block_while_erasing
...
Block all tasks (not interrupts) during flash erase
2020-12-02 16:10:25 -05:00
Scott Shawcroft
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
Scott Shawcroft
73e22f9eeb
Block all tasks (not interrupts) during flash erase
...
Otherwise we risk running code from flash while an erase is in
progress, crashing and corrupting the file system.
Related to #3744
2020-12-01 18:15:06 -08:00
Dan Halbert
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
Scott Shawcroft
927624468d
Two minor socket changes
...
* Remove BrokenPipeError and prefer to return the number of bytes
received. (May be zero.)
* Add two minute backup timeout to reduce the chance we hang on
recv accidentally.
2020-11-30 18:39:50 -08:00
Scott Shawcroft
4ac4faaaf6
Use nina-fw root certs
...
That way we have one set we use for all of Adafruit's connected
devices.
2020-11-30 17:02:26 -08:00
Scott Shawcroft
5b3c930e38
Merge pull request #3738 from microDev1/fix-touch
...
ESP32S2: Fix multiple touchpad don't work simultaneously
2020-11-30 16:03:16 -08:00
Christian Walther
c7404a3ff8
Add movable allocation system.
...
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
Dan Halbert
596e0e4bd2
merge from upstream
2020-11-27 16:06:57 -05:00