Scott Shawcroft
190e7d629e
WIP
2018-02-09 16:37:27 -08:00
Scott Shawcroft
e2d1e1e281
Merge pull request #610 from dhalbert/_etext_fix
...
Correct _etext location; clean up .ld files
2018-02-09 08:48:16 -08:00
Dan Halbert
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
Dan Halbert
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio
...
Enable bitbangio now that we have digitalio.
2018-02-08 21:24:32 -05:00
Dan Halbert
af566e1135
Merge pull request #608 from tannewt/analog
...
ports/atmel-samd: Re-enable analogio
2018-02-08 21:23:07 -05:00
Scott Shawcroft
3e63f59867
Use write instead of set because it clears the bits before setting them.
2018-02-08 16:12:33 -08:00
Scott Shawcroft
aeae0090af
Enable bitbangio now that we have digitalio.
...
Also remove a rogue neopixel_write.
2018-02-08 16:03:05 -08:00
Scott Shawcroft
82bc11585e
ports/atmel-samd: Re-enable analogio
...
This introduces SAMD51 support and re-enables SAMD21 support.
Fixes #263
2018-02-08 14:48:08 -08:00
Scott Shawcroft
3e79638b9c
Merge pull request #603 from siddacious/SAMD51G_support
...
Added SAMD51G support as per issue #597
2018-02-08 09:55:48 -08:00
Kevin Townsend
e5f0cfcf20
Merge pull request #604 from arturo182/nrf_bitbangio
...
nrf: Use the shared bitbangio module
2018-02-08 09:57:44 +01:00
Bryan Siepert
dfc2b82ede
Added SAMD51G support as per issue #597
2018-02-07 21:23:25 -08:00
Kevin Townsend
71128b575f
Merge pull request #602 from arturo182/nrf_struct
...
nrf: Use the shared struct module
2018-02-08 00:56:31 +01:00
Kevin Townsend
9d191f7f9f
Merge pull request #589 from arturo182/nrf_gamepad
...
nrf: Implement ticks, add gamepad module and example
2018-02-07 22:17:05 +01:00
Scott Shawcroft
77c70c7e50
Merge pull request #598 from arturo182/comment_fix
...
shared-bindings: Fix incorrect code comments
2018-02-07 12:02:15 -08:00
arturo182
afaee7f782
nrf: Use the shared bitbangio module
2018-02-07 00:03:23 +01:00
arturo182
ff041caa52
shared-bindings: Fix incorrect code comments
...
Most likely caused by copy-paste.
2018-02-06 22:03:17 +01:00
Kevin Townsend
243279fdc3
Merge pull request #592 from arturo182/nrf_analogout
...
nrf: Cleanup AnalogOut and throw an exception in constructor
2018-02-06 21:31:07 +01:00
arturo182
021df5d3d3
nrf: Cleanup AnalogOut and throw an exception in constructor
...
The nRF MCUs do not support analog output. Throwing an exception
in the constructor will stop users from creating an instance of
the AnalogOut class.
In the future we can ifdef-out the whole class so it is not available
in the module at all.
2018-02-06 21:15:49 +01:00
Scott Shawcroft
6c5cb01b4a
Merge pull request #564 from deanm1278/master
...
DM: added write_readinto to bitbangio
2018-02-06 09:38:17 -08:00
Kevin Townsend
c433a82082
Merge pull request #573 from arturo182/master
...
nRF port improvements and pca10056 support
2018-02-06 15:26:40 +01:00
Scott Shawcroft
c33db95066
Merge pull request #582 from arturo182/gen_docs_name
...
docs: Update the name of the projects in generated docs
2018-02-05 12:39:42 -08:00
arturo182
668524b8e1
docs: Update the name of the projects in generated docs
2018-02-05 21:01:57 +01:00
arturo182
d1b2f69771
nrf: Use the shared struct module
2018-02-05 20:50:06 +01:00
arturo182
1de2ee6884
nrf: Implement ticks, add gamepad module and example
2018-02-05 20:48:25 +01:00
arturo182
76f5c01798
nrf: Get the port working on pca10056 (nRF52840)
2018-02-05 20:38:41 +01:00
dean
68309c3fac
replace tabs with spaces
2018-02-05 10:44:29 -05:00
Scott Shawcroft
f4018bd6b6
Merge pull request #575 from arturo182/nrf_led
...
nrf: Fix missing LED GPIO initialization
2018-02-04 22:51:03 -08:00
arturo182
a64b5c84de
nrf: Fix missing LED GPIO initialization
...
led_init was never called, which means the GPIOs were never set to
output and the LEDs didn't work.
2018-02-03 13:51:11 +01:00
arturo182
6731b47d5a
nrf: Implement MCU temperature reading
...
If softdevice is available and enabled the SD function will be used,
otherwise use MCU registers.
2018-02-02 20:33:21 +01:00
arturo182
c6a542d166
nrf: Add SD 6.0.0-6.alpha to the download script
2018-02-02 20:31:47 +01:00
arturo182
fed9087274
nrf: Add flash section for fatfs for no SD pca10056
2018-02-02 20:31:47 +01:00
arturo182
616cbc6271
nrf: Use more generic header
...
It will include the mcu-specific header based on defines.
2018-02-02 20:31:47 +01:00
arturo182
d0b451be94
nrf: Use the right SPI registers on nRF52840
2018-02-02 20:31:47 +01:00
arturo182
a776c2a51c
nrf: Fix errorneous indent
...
Otherwise we get the "recipe commences before first target" messsage.
2018-02-02 20:31:47 +01:00
Dan Halbert
7c6adaa661
Merge pull request #567 from tannewt/ignore_docs_dir
...
Ignore docs directory when freezing as well.
2018-02-01 05:50:01 -08:00
Scott Shawcroft
737178e0d2
Ignore docs directory when freezing as well.
...
conf.py for Sphinx will be moved here.
2018-01-31 11:10:50 -08:00
dean
0e13aba2fe
DM: fix sytling
2018-01-30 17:45:04 -05:00
Scott Shawcroft
d556ce291f
Merge pull request #563 from dhalbert/3.0_cpx_circuitpy_fail
...
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 14:42:00 -08:00
dean
a7f72eb2d8
DM: added write_readinto to bitbangio
2018-01-30 17:18:57 -05:00
Dan Halbert
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
Dan Halbert
6085599963
Merge pull request #560 from dhalbert/3.0_issue_464_spi_baud_rate
...
Correct computation of SPI baud rate register value, and allow for the value to be 0.
2018-01-30 12:09:12 -08:00
Dan Halbert
cc87363234
documentation: caution on SPI clock speed for SAMD21
2018-01-30 14:31:20 -05:00
Dan Halbert
64831f4e7d
add SPI.frequency to nRF
2018-01-30 13:23:00 -05:00
Dan Halbert
e550b024c5
atmel-samd: Correct computation of SPI baud rate.
...
all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
Dan Halbert
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0
...
Update ugame port for the final ugame10 version
2018-01-29 13:35:06 -08:00
Dan Halbert
36ffd31712
Merge pull request #557 from python-ugame/stage-lib
...
Bring back the _stage library
2018-01-29 13:29:58 -08:00
Radomir Dopieralski
d595a03bbd
Update ugame port for the final ugame10 version
...
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
2018-01-29 22:19:09 +01:00
Radomir Dopieralski
189c62ac7d
Bring back the _stage library
...
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
2018-01-29 21:24:46 +01:00
Dan Halbert
271c4bead6
Merge pull request #552 from tannewt/flexible_parser
...
Make parsing more memory flexible.
2018-01-24 18:50:26 -08:00
Scott Shawcroft
a1254f1255
Merge pull request #551 from dhalbert/3.0_double_word_stack_align
...
3.0 double word stack align
2018-01-24 18:27:22 -08:00