Commit Graph

19654 Commits

Author SHA1 Message Date
Dan Halbert
d0f1cfb039 address review; use gpio_set() carefully 2021-02-25 18:41:22 -05:00
Scott Shawcroft
2b163ccd6a
Fix incorrect deinit mask 2021-02-25 14:57:46 -08:00
Scott Shawcroft
1b00d94b23
Fix second shared PWM
Fixes #4210
2021-02-25 14:49:09 -08:00
Scott Shawcroft
80f7972f72
Update RP2040 Feather pinout for production rev 2021-02-25 14:46:08 -08:00
Scott Shawcroft
b69cb0144c
Merge pull request #4268 from kmatch98/blit_self
Update for clean blitting into itself
2021-02-25 14:15:25 -08:00
Jeff Epler
22276710e6 rp2pio: Fix writing where the stride was 2 or 4
The wrong stride value was being checked.
2021-02-25 15:50:49 -06:00
Kevin Matocha
a7a4f93ff8 Updated build configs to turn off BITMAPTOOLS for smaller builds 2021-02-25 15:44:32 -06:00
Kevin Matocha
4097c949a3 Update for clean blitting into itself 2021-02-25 14:16:40 -06:00
Dan Halbert
94d7bfb1c9
Merge pull request #4264 from UnexpectedCircuitPython/main
Expanded pin names for TinyS2 + FeatherS2 pin additions for DAC1 & DAC2
2021-02-25 15:13:18 -05:00
Dan Halbert
199a8ce8b0 change DigitalInOut direction only when necessary; strong drive strength 2021-02-25 14:10:19 -05:00
Scott Shawcroft
d4bf0d5e2d
Merge pull request #4258 from jepler/pixelbuf-brightness-performance
_pixelbuf: Increase performance of brightness-scaling
2021-02-25 10:51:32 -08:00
root
f8eb5bc275 Cleanup PIOs and State Machines on soft reset 2021-02-25 12:38:43 -06:00
microDev
8170e26a86
more uart improvements
- address suggested changes
- refine uart instance availibility checks
- improve pin validation and rx buffer handling
2021-02-25 23:46:00 +05:30
Dan Halbert
bbe0602738
Merge pull request #4245 from kamtom480/spresense_usb_speed
spresense: Pass the correct USB bus speed after restart
2021-02-25 11:02:33 -05:00
Dan Halbert
a7120bfad9
Merge pull request #4263 from weblate/weblate-circuitpython-main
Translations update from Weblate
2021-02-25 10:39:42 -05:00
Kamil Tomaszewski
fb32e0a7fd qtpy_m0_haxpress: Change config to make it fit. 2021-02-25 09:44:33 +01:00
Seon Rozenblum
69b10d7925 Added DAC1 & DAC2 pin names for FeatherS2
Expanded pin names for TinyS2 and added some new ones for functionality I forgot to add pin names for
Cleaned up mpconfigboard
2021-02-25 17:32:34 +11:00
Hosted Weblate
d9a2c8308f
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/
2021-02-25 01:24:53 +01:00
Hosted Weblate
a52132c170 Merge remote-tracking branch 'origin/main' into main 2021-02-25 01:24:51 +01:00
Daniel Glocker
00b1d4e167
Translated using Weblate (German)
Currently translated at 81.2% (783 of 964 strings)

Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/de/
2021-02-25 01:24:51 +01:00
Jeff Epler
abfacc3742
Merge pull request #4251 from tannewt/rp2040_audiobusio
Implement audiobusio and enhance PIO for it
2021-02-24 18:24:44 -06:00
Jeff Epler
dac4ac5d2a _pixelbuf: Respond to review comments
* Comment on the reason for scaling by 256
 * Divide by 256 instead of shifting
 * fix a cast; eliminate an unneeded roundf() to get a few bytes code back
2021-02-24 16:27:09 -06:00
Kevin Matocha
c883bb773b Rearrange input parameters 2021-02-24 16:03:50 -06:00
microDev
5d7fdafcde
implement suggested changes
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
Kamil Tomaszewski
ef3a61432b Add the missing argument to the HID functions 2021-02-24 19:09:17 +01:00
Kamil Tomaszewski
dafdd246bc Update tinyUSB 2021-02-24 18:27:54 +01:00
Kamil Tomaszewski
e369473794 spresense: change RX and TX buffer size for CDC 2021-02-24 18:19:18 +01:00
Kamil Tomaszewski
ced820c8a7 Update tinyUSB 2021-02-24 18:19:18 +01:00
DavePutz
eeb89a97b4
Merge pull request #41 from adafruit/main
Update from adafruit main
2021-02-24 10:09:52 -06:00
Jeff Epler
b7f5c277ad _pixelbuf: Increase performance of brightness-scaling
On the Pico, this increases the "fill rate" of
    pixels[:] = newvalues
considerably.  On a strip of 240 RGB LEDs, auto_write=False, the timings
are:

|| Brightness || Before || After || Improvement ||
|| 1.0        || 117 kpix/s || 307 kpix/s || 2.62x ||
|| 0.07       || 117 kpix/s || 273 kpix/s || 2.33x ||

It's worth noting that even the "before" rate is fast compared to the
time to transmit a single neopixel, but any time we can gain back
in the whole pipeline will let marginal animations work a little better.
To set all the pixels in this way and then show() gives a pleasant bump
to the framerate, from about 108Hz to 124Hz (1.15x)

The main source of speed-up is using integer math instead of floating
point math for the calculation of the post-scaled pixel values.  A slight
secondary gain is achieved by avoiding the scaling altogether when
the scale factor is 1.0.

Because the math is not exactly the same, some scaled pixel values may
change by +- 1 RGBW "step".  In practice, this is unlikely to matter.

The gains are bigger on the Pico and other M0 microcontrollers than M4
microcontrollers with floating point math in the hardware.

Happily, flash size is also improved a bit on the Pico build I did,
going from
> 542552 bytes used, 506024 bytes free in flash firmware space out of 1048576 bytes (1024.0kB).

to
> 542376 bytes used, 506200 bytes free in flash firmware space out of 1048576 bytes (1024.0kB).
2021-02-24 09:51:27 -06:00
Kevin Matocha
cd4d55a573 yet another sphinx try 2021-02-24 08:05:40 -06:00
Kevin Matocha
e858db07f0 Another sphinx try 2021-02-24 07:59:32 -06:00
Kevin Matocha
2815c6dafa More sphinx attempts 2021-02-24 07:49:34 -06:00
Kevin Matocha
af5ad50125 More sphinx fixes 2021-02-24 01:18:30 -06:00
Kevin Matocha
18658b77f3 Sphinx docstring updates 2021-02-24 01:00:13 -06:00
Kevin Matocha
b720028642 Add bitmaptools module 2021-02-23 23:23:14 -06:00
Mark
b935dcafdc
Merge branch 'main' into rp2040_countio 2021-02-23 19:46:41 -06:00
gamblor21
379f454ce6 Adding countio to rp2040 2021-02-23 19:38:05 -06:00
Scott Shawcroft
889f02abe4
Translations 2021-02-23 16:32:16 -08:00
Scott Shawcroft
abbbb91fa8
Add state machine divisor check
This causes an exception when setting a state machine too slow or
too fast.

Fixes #4222
2021-02-23 16:30:46 -08:00
Scott Shawcroft
360475e266
Implement audiobusio and enhance PIO for it
This adds I2SOut and PDMIn support via PIO.

StateMachines can now:
 * read and read while writing
 * transfer in 1, 2 or 4 byte increments
 * init pins based on expected defaults automatically
 * be stopped and restarted
 * rxfifo can be cleared and rxstalls detected (good for tracking when
   the reading code isn't keeping up)

Fixes #4162
2021-02-23 15:50:00 -08:00
Scott Shawcroft
e41137c745
Merge pull request #4244 from UnexpectedCircuitPython/main
Added Unexpected Maker TinyS2 board definition
2021-02-23 10:40:06 -08:00
Scott Shawcroft
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards
Added definitions for Pimoroni RP2040-based boards
2021-02-23 10:00:19 -08:00
Scott Shawcroft
8b626a4800
Merge pull request #4248 from dhalbert/uniform-build-shrinks
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-23 08:58:01 -08:00
Scott Shawcroft
137a995ef5
Merge pull request #4249 from dhalbert/sys-control-typo
Fix typos for CIRCUITPY_USB_HID_SYS_CONTROL
2021-02-23 08:48:48 -08:00
Dan Halbert
7a4198885e Fix typos for CIRCUITPY_USB_HID_SYS_CONTROL 2021-02-23 09:22:20 -05:00
ZodiusInfuser
1a0bf4c33f
Added flash size for PicoSystem 2021-02-23 11:04:20 +00:00
ZodiusInfuser
a9951c9b6c
Added flash size for Keybow2040 2021-02-23 11:01:40 +00:00
ZodiusInfuser
ca9b7debe0
Added flash size for Tiny2040 2021-02-23 10:43:35 +00:00
Seon Rozenblum
78b2daa2a7 Added Unexpected Maker TinyS2 board definition 2021-02-23 17:55:17 +11:00