159202ad00
lib/utils: Expose pyb_set_repl_info function public
...
The patch enables the possibility to disable or initialize the repl
info from outside of the module. Can also be used to initialize the
repl_display_debugging_info in pyexec.c if not startup file is clearing
.bss segment.
2017-03-03 00:36:25 +01:00
235c0edacb
nrf5/sdk: Updating ringbuffer.h to use volatile variables for start and end.
2017-03-03 00:11:42 +01:00
d057a93675
nrf5/sdk: Rename cccd_enable variable to m_cccd_enable in bluetooth le UART driver. Also made the variable volatile.
2017-03-03 00:06:51 +01:00
df31508d6f
nrf5/modules: Updating example in ubluepy header to use handle instead of data length upon reception of an event.
2017-03-03 00:05:09 +01:00
db3dd8bc8b
nrf5/modules: Updating ubluepy peripheral to pass handle value to python event handler instead of data length. Data length can be derived from the bytearray structure.
2017-03-03 00:04:13 +01:00
22f66e274d
nrf5/sdk: Updating bluetooth le driver to handle SEC PARAM REQUEST by replying that pairing is not supported. Moving initialization of adv and tx in progress state variables to stack enable function.
2017-03-02 22:48:04 +01:00
4efedb67b6
nrf5/modules: Enable ubluepy constants for CONNECT and DISCONNECT for other bluetooth stacks than s132.
2017-03-02 22:43:06 +01:00
e60fa9b3e1
nrf5/sdk: Fixing unaligned access issues for nrf51 (cortex-m0) in bluetooth le driver
2017-03-02 21:25:51 +01:00
44c9888511
nrf5/sdk: Removing SDK dependant BLE UART Service implementation
...
The sdk_12.1.0 nrf52_ble.c implementation was dependent on SDK components.
This has been replaced with the ble_uart.c implementation using a standalone
bluetooth driver implementation without need of SDK components.
Also, sdk.mk has been updated to not use a special linker script.
2017-03-01 00:05:04 +01:00
f88ad9f5ab
nrf52: Removing folder to not confuse which folder is in development
2017-02-28 23:57:08 +01:00
58cc59cfbe
nrf5/sdk: Removing ble_repl_linux.py
...
Script does not really work very well with blocking char read and
async ble notifications printing data when terminal stdout is blocked
by readchar. Bluetooth UART profile implemented in ble_uart.c is
now working with tralamazza's nus_console nodejs script.
Ref: https://github.com/tralamazza/nus_console
2017-02-28 23:40:46 +01:00
ac677efb8b
nrf5: Add default config for MICROPY_PY_BLE_NUS (0)
...
Disable Bluetooth UART to be used for REPL by default. Can be overridden
in nrf5_sdk_conf.h. It is defined in mpconfigport.h as it is connected to
mphalport.c, where the config is used to determine whether default print
functions should be using HW UART or Bluetooth UART.
2017-02-28 23:33:54 +01:00
e8761682b7
nrf5/sdk: Add ble_uart.c to source list
...
ble_uart.c implements UART Bluetooth service on top of the
bluetooth stack driver api calls. Can be enabled to be compiled
in by defining MICROPY_PY_BLE_NUS = 1 in nrf5_sdk_conf.h.
2017-02-28 23:30:36 +01:00
84313b0261
nrf5/sdk: Removing include of sdk_12.1.0's build.mk
...
As no sources are needed from the SDK this build makefile
can be deleted.
2017-02-28 23:28:09 +01:00
9472196ee7
nrf5: Force implementation of tx_str_cooked function if BLE NUS enabled.
...
If BLE UART service has been enabled, the mp_hal_stdout_tx_strn_cooked
is not defined by default anymore, and has to be implemented by the
UART driver (in this case BLE).
2017-02-28 23:18:31 +01:00
216c97ff9a
nrf5/sdk: Adding compiler guard around exchange MTU request event.
...
As s110 is not having this event or function call to answer on a MTU
exchange request, this is excluded for all other version than s132
for now.
2017-02-28 23:13:02 +01:00
c1ffac9998
Merge pull request #1 from ajbaabf/nrf5_no_sdk
...
added support for hardware temperature sensor
2017-02-28 08:33:11 +01:00
0e723091f9
minor documentation and extra tabs removal fixes
2017-02-28 09:34:13 +03:00
382f718cfc
nrf5/sdk: Updating BLE UART implementation by swapping TX and RX uuid and characterisitic handling. Removed dummy write delay of 10 ms.
2017-02-27 23:47:47 +01:00
b032d765ff
nrf5/sdk: Backing up progress in bluetooth le driver. Adding new gap and gatts handlers. Added handling of tx complete events when using notification, responding to MTU request, and setting of default connection parameters.
2017-02-27 23:40:39 +01:00
12a6cb0fbf
fixed temp module to allow for instance support
2017-02-27 21:46:53 +03:00
e52ebb095c
fixed temp module to allow for instance support
2017-02-27 21:37:32 +03:00
56cf514627
Merge pull request #2 from dhylands/fix-makefile
...
Fix up Makefile dependencies
2017-02-26 17:39:09 +01:00
66542c34b9
did required modification to merge the temperature sensore module
2017-02-26 11:17:07 +03:00
378c40b4da
did required modification to merge the temperature sensore module
2017-02-26 11:14:17 +03:00
d3c3fa4a74
Fix up Makefile dependencies
...
I also didn't see any real reason for mkrules.mk to exist,
so I merged the contents into Makefile.
Now you can do:
```
make BOARD=pca10028 clean
make BOARD=pca10028 flash
```
and it will work properly.
2017-02-25 16:52:46 -08:00
dcd980381d
nrf5: Updating Makefile to use correct variable for setting directory of file to freeze as mpy.
2017-02-26 01:30:33 +01:00
65f3e16775
nrf5: Setting stack top in main.c. Thanks dhylands for pointing this out.
2017-02-26 01:29:13 +01:00
64b23e1127
nrf5/sdk: Backing up progress in BLE UART driver. Adding ringbuffer in order to poll bytes from recieved data in REPL main loop.
2017-02-24 15:14:12 +01:00
bfda169dfe
nrf5/modules: Updating ubluepy example to print out gatts write events with data.
2017-02-24 15:08:32 +01:00
e60a06563e
nrf5/boards: Updating pca10028 bluetooth stack targets to have a MCU_SUB_VARIANT.
2017-02-24 15:03:53 +01:00
3882b0e2ff
added support for hardware temperature sensor
2017-02-24 00:38:08 +03:00
6b898d1d67
nrf5/sdk: Adding macro based ringbuffer written by Philip Thrasher. source: https://github.com/pthrasher/c-generic-ring-buffer/blob/master/ringbuffer.h . Copyright noticed copied into the file, and file reviewed by Philip.
2017-02-23 21:52:23 +01:00
f10abda60a
nrf5/sdk: Updating bluetooth le driver to extract data length and pointer from the event structure upon gatts write operation.
2017-02-22 19:54:02 +01:00
7fee0cdde1
nrf5/modules: Expose ubluepy characteristic and peripheral types as external declaration in ublupy header.
2017-02-22 19:10:18 +01:00
09fd2b86d1
nrf5: Updating main to initialize bluetooth le uart module right before bluetooth REPL is started.
2017-02-21 23:38:35 +01:00
3e66898c37
nrf5/sdk: Updating bluetooth le uart implemenatation to block until cccd is written.
2017-02-21 23:37:52 +01:00
80b2d7e4ad
nrf5/sdk: Backing up ubluepy version of ble uart service for Bluetooth LE REPL.
2017-02-21 00:15:51 +01:00
acb5c7b4ee
nrf5/modules: Updating ubluepy example in header to align with bluetooth uart service characteristic's.
2017-02-20 21:28:07 +01:00
c9bfcb5bc5
nrf5/modules: Implementing characteristic write method. Possible to use write for both write and notifications.
2017-02-20 21:27:21 +01:00
7223950864
nrf5/sdk: Remaning bluetooth driver function ble_drv_attr_notif to *_notify.
2017-02-20 21:26:19 +01:00
601f07cbf2
nrf5/modules: Adding props and attrs parameter to ubluepy characteristic constructor to override default values. Adding method for reading characteristic properties. Adding values to the local dict table that gives possibility to OR together a configuration of properties and attributes in the keyword argument during construction.
2017-02-20 20:28:19 +01:00
a973dde603
nrf5/sdk: Adding parsing of characteristic properties and attributes (extra descriptions for the characteristic, for now cccd).
2017-02-20 20:24:27 +01:00
89fc67a9f8
nrf5/modules: Adding new members to ubluepy characteristic object, props and attrs. Adding enum typedefs for various properties and attributes.
2017-02-20 20:22:23 +01:00
7c0195da6c
nrf5/modules: Syncing uart module code after upmerge with upstream master.
2017-02-19 19:06:12 +01:00
f69c1acbbe
Merge branch 'nrf52' into nrf5_no_sdk
2017-02-19 19:03:20 +01:00
05ec4f64e2
Merge branch 'master' into nrf52
2017-02-19 19:02:29 +01:00
486d05ff17
nrf5/boards: Releasing more RAM for heap use in the nrf51 s110 linker script.
2017-02-19 19:00:31 +01:00
10e7c16351
nrf5/modules: Adding new gatts handler and registration of it during creation of a peripheral object. Also, added forwarding to python callback function (for now the same as for GAP).
2017-02-19 00:10:27 +01:00
ac14bb4736
nrf5/modules: Adding new callback type in modubluepy for gatts events.
2017-02-19 00:09:11 +01:00
Glenn Ruben Bakke
Bander Ajba
Dave Hylands