CDario
c8191e8830
Better pins definitions
2022-10-25 11:41:39 +00:00
CDario
5fa67548ea
Added missing sdkconfig file
2022-10-24 20:03:06 +00:00
CDario
39171d7626
Removed unnecessary compiler flags
2022-10-24 19:21:26 +00:00
CDario
beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
MicroDev
773bb99c96
Merge pull request #7099 from Neradoc/add-m5stampc3-board
...
Add M5Stack Stamp C3 Board
2022-10-23 00:05:44 +05:30
Neradoc
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
microDev
8f0a674a1b
coproc module enhancements
...
- add light and pretend-to-deep sleep support
- check coproc running status
2022-10-22 19:08:49 +05:30
microDev
83b54d003d
implement more checks in coproc module
...
- check memory address range
- check firmware size at an earlier stage
2022-10-22 19:05:48 +05:30
askpatrickw
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
Dan Halbert
da7edf80e0
Merge pull request #7091 from MicroDev1/corpoc
...
Add `CoprocAlarm`
2022-10-21 13:36:01 -04:00
microDev
5b2728bd65
reorganize espressif mpconfigport.mk
2022-10-21 17:35:59 +05:30
microDev
2285dd1838
update espressif risc-v build configuration
...
- use optimization level O2
- explicitly state risc-v arch
2022-10-21 17:11:56 +05:30
microDev
b33a2b45dc
add coproc alarm
2022-10-20 18:38:20 +05:30
microDev
5232e3f6c3
add coproc module
2022-10-20 09:09:44 +05:30
microDev
fb91c2f436
cleanup sdkconfig-esp32.defaults
...
- remove log level: set by -opt or -debug sdkconfig
- remove lwip hostname: set by board specific sdkconfig
2022-10-17 22:05:20 +05:30
microDev
434c6d5604
fix uf2 bootloader condition in makefile
2022-10-17 19:45:48 +05:30
microDev
5114ae7a31
fix 2MB-no-uf2 partition table
2022-10-17 19:44:08 +05:30
microDev
f86377e0f1
fix 4MB-no-uf2 partition table
2022-10-17 19:42:41 +05:30
microDev
e7b25dbf73
improve dualbank errors
2022-10-15 13:20:10 +05:30
Dan Halbert
0ce84b27e8
Merge pull request #7053 from CytronTechnologies/add-pin-definitions-maker-feather-aiot-s3
...
Added Pin Definitions for Cytron Maker Feather AIoT S3
2022-10-14 11:31:53 -04:00
Kong Wai Weng
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
microDev
66b539d768
fix espressif log level
2022-10-14 11:33:10 +05:30
Dan Halbert
7e4b2a09eb
Merge pull request #7000 from MicroDev1/storage-extend
...
Add Storage Extension Support
2022-10-13 10:05:55 -04:00
microDev
728fea4ca4
add storage extension python api
2022-10-13 09:53:33 +05:30
Dan Halbert
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev
...
Add BananaPi BPI-PicoW-S3 .
2022-10-11 22:53:37 -04:00
Wind-stormger
376df8ec7e
Add BananaPi BPI-PicoW-S3 .
...
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
2022-10-12 09:11:25 +08:00
Jeff Epler
c98174eea5
Add support for SSL client certificate (load_cert_chain)
...
Tested with badssl.com:
1. Get client certificates from https://badssl.com/download/
2. Convert public portion with `openssl x509 -in badssl.com-client.pem -out CIRCUITPY/cert.pem`
3. Convert private portion with `openssl rsa -in badssl.com-client.pem -out CIRCUITPY/privkey.pem` and the password `badssl.com`
4. Put wifi settings in CIRCUITPY/.env
5. Run the below Python script:
```py
import os
import wifi
import socketpool
import ssl
import adafruit_requests
TEXT_URL = "https://client.badssl.com/ "
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
pool = socketpool.SocketPool(wifi.radio)
context = ssl.create_default_context()
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} without certificate (should fail)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 400 Bad Request")
input("hit enter to continue\r")
print("Loading client certificate")
context.load_cert_chain("/cert.pem", "privkey.pem")
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} with certificate (should succeed)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 200 OK")
```
2022-10-10 15:10:53 -05:00
Dan Halbert
21c0c4c1a6
update esp-idf; allow start/stop channels in wifi scanning
2022-10-07 15:29:09 -04:00
Dan Halbert
8d82e4ba5f
Merge pull request #7008 from MicroDev1/patch
...
Cleanup `mpconfigboard.mk` of espressif boards
2022-10-06 11:20:11 -04:00
Dan Halbert
e0517c7379
Merge pull request #6999 from jepler/picow-ssl
...
pico_w: implement ssl with caveats
2022-10-06 10:51:36 -04:00
microDev
4f753251db
cleanup mpconfigboard.mk of espressif boards
...
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
2022-10-06 16:15:01 +05:30
microDev
b0ef35d50b
update storage extension implementation
2022-10-06 09:19:56 +05:30
Dan Halbert
296960dd89
shorten board.c
2022-10-05 20:23:19 -04:00
Neradoc
d31acdef6c
we don't use AUTORESET_DELAY_MS
2022-10-06 02:19:48 +02:00
Jeff Epler
a64c1a11c5
move nina-fw certificates so it can be shared with other ports
2022-10-05 14:56:25 -05:00
Jeff Epler
09023abcd2
Update espressif function prototype to match
2022-10-05 14:56:25 -05:00
Kyle Mohr
dd5f9411c8
Merge branch 'adafruit:main' into main
2022-10-05 13:44:12 -05:00
Jeff Epler
dcb650c513
pico w: add ssl module
...
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
2022-10-05 13:12:43 -04:00
microDev
2618e11002
use next update partition
2022-10-04 19:42:48 +05:30
microDev
9fe7308b88
conditionally add storage extension
2022-10-04 17:26:28 +05:30
microDev
7d8ff20dac
add initial storage extension support
2022-10-04 17:25:48 +05:30
Kyle Mohr
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
Kyle Mohr
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
Kyle Mohr
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
Kyle Mohr
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
Kyle Mohr
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
Dan Halbert
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
Dan Halbert
ad79f595a5
Merge pull request #6974 from MicroDev1/patch
...
Couple Minor Fixes
2022-10-01 13:12:01 -04:00
microDev
7eaeca4eb3
update espressif port's .gitignore
2022-10-01 09:14:48 +05:30
Dan Halbert
f9e655da47
Merge pull request #6962 from dhalbert/espressif-deep-sleep-hold-pins
...
Espressif: do not hold pins during deep sleep if not necessary
2022-09-30 22:20:44 -04:00
Jeff Epler
907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Dan Halbert
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
Dan Halbert
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
Jeff Epler
72bce51ce3
restore submodule commits
2022-09-28 14:48:54 -05:00
Jeff Epler
6c3cdceb45
Implement scan, connect, ping
...
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
2022-09-28 10:06:33 -05:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
Dan Halbert
de80db681f
Merge pull request #6915 from dhalbert/ringbuf-cleanup
...
ringbuf cleanup
2022-09-25 17:50:21 -04:00
Dan Halbert
d44edc4a0c
Merge pull request #6937 from jepler/issue6839
...
Use new unique ID for this board
2022-09-24 23:55:06 -04:00
Jeff Epler
f12136af7f
esp32-camera: sync doc with code.
...
Closes : #6836
2022-09-23 08:54:00 -05:00
Jeff Epler
5bbbca4d44
lock and unlock i2c bus around any ops that might access it
2022-09-22 17:03:05 -05:00
Jeff Epler
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
Dan Halbert
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
2b25a5d574
update esp32-camera
2022-09-13 13:16:37 -04:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
microDev
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
Dan Halbert
52080e24eb
status bar control
2022-08-30 15:23:44 -04:00
Jeff Epler
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c
...
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
2022-08-28 16:46:50 -05:00
Jeff Epler
dc27fb967d
error at runtime if no psram actually reserved
2022-08-26 09:27:50 -05:00
Jeff Epler
9f22e75e5e
error if camera is configured but no psram
2022-08-26 09:27:50 -05:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
Scott Shawcroft
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix
...
Fix ESP32 touch; rework common code a bit
2022-08-17 10:24:22 -07:00
Dan Halbert
2bc8d73776
Fix ESP32 touch; rework common code a bit
2022-08-16 20:04:27 -04:00
Martin
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
lady ada
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
MicroDev
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset
...
Audit all boards with LED pins defined
2022-08-13 15:25:02 +05:30
