* Always clear the peripheral interrupt so we don't hang when full
* Store the ringbuf in the object so it gets collected when we're alive
* Make UART objects have a finaliser so they are deinit when their
memory is freed
* Copy bytes into the ringbuf from the FIFO after we read to ensure
the interrupt is enabled ASAP
* Copy bytes into the ringbuf from the FIFO before measuring our
rx available because the interrupt is based on a threshold (not
> 0). For example, a single byte won't trigger an interrupt.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture. So rename this config value to better reflect what it
measures, and also prefix it with MP_.
For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).
Signed-off-by: Damien George <damien@micropython.org>
Newer GCC versions are able to warn about switch cases that fall
through. This is usually a sign of a forgotten break statement, but in
the few cases where a fall through is intended we annotate it with this
macro to avoid the warning.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments. This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...). In other places
it is used to prevent excessive reformatting that would make the code less
readable.
When threads and the GIL are enabled, then the GC mutex is not needed. The
gc_mutex field is never used in this case because of:
#if MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL
#define GC_ENTER() mp_thread_mutex_lock(&MP_STATE_MEM(gc_mutex), 1)
#define GC_EXIT() mp_thread_mutex_unlock(&MP_STATE_MEM(gc_mutex))
#else
#define GC_ENTER()
#define GC_EXIT()
#endif
So, we can completely remove gc_mutex everywhere when MICROPY_PY_THREAD
&& !MICROPY_PY_THREAD_GIL.
The remaining assignment was added in upstream micropython; the
deleted assignment was added in circuitpython as part of the long-lived
object area feature. During the merge, the redundant assignment
was not removed.
(since collected is a local variable and no pointers to it escape,
it doesn't seem possible for the placement of the assignment before
or after GC_ENTER() is important)
This diagnostic was found by clang 7's scan-build static analyzer.
This fixes a crash on boards with built-in displays which statically
allocate the display bus. When the pointer is provided to never
free, it tries to allocate on the non-existant heap and crashes.
The older "bool has_finaliser" gets recast as GC_ALLOC_FLAG_HAS_FINALISER=1
so this is a backwards compatible change to the signature. Since bool gets
implicitly converted to 1 this patch doesn't include conversion of all
calls.
Otherwise there is the possibility that n_free starts out non-zero from the
previous iteration, which may have found a few (but not enough) free blocks
at the end of the heap. If this is the case, and if the very first blocks
that are scanned the second time around (starting at
gc_last_free_atb_index) are found to give enough memory (including the
blocks at the end of the heap from the previous iteration that left n_free
non-zero) then memory will be allocated starting before the location that
gc_last_free_atb_index points to, most likely leading to corruption.
This serious bug did not manifest itself in the past because a gc_collect
always resets gc_last_free_atb_index to point to the start of the GC heap,
and the first block there is almost always allocated to a long-lived
object (eg entries from sys.path, or mounted filesystem objects), which
means that n_free would be reset at the start of the search loop.
But with threading enabled with the GIL disabled it is possible to trigger
the bug via the following sequence of events:
1. Thread A runs gc_alloc, fails to find enough memory, and has a non-zero
n_free at the end of the search.
2. Thread A calls gc_collect and frees a bunch of blocks on the GC heap.
3. Just after gc_collect finishes in thread A, thread B takes gc_mutex and
does an allocation, moving gc_last_free_atb_index to point to the
interior of the heap, to a place where there is most likely a run of
available blocks.
4. Thread A regains gc_mutex and does its second search for free memory,
starting with a non-zero n_free. Since it's likely that the first block
it searches is available it will allocate memory which overlaps with the
memory before gc_last_free_atb_index.
DEBUG_printf and MICROPY_DEBUG_PRINTER is now used instead of normal
printf, and a fault is fixed in mp_obj_class_lookup with debugging enabled;
see issue #3999. Debugging can now be enabled on all ports including when
nan-boxing is used.
This patch adds the gc_sweep_all() function which does a garbage collection
without tracing any root pointers, so frees all the memory, and most
importantly runs any remaining finalisers.
This helps primarily for soft reset: it will close any open files, any open
sockets, and help to get the system back to a clean state upon soft reset.
Without this, if GC threshold is hit and there is not enough memory left to
satisfy the request, gc_collect() will run a second time and the search for
memory will happen again and will fail again.
Thanks to @adritium for pointing out this issue, see #3786.
This patch moves the start of the root pointer section in mp_state_ctx_t
so that it skips entries that are not pointers and don't need scanning.
Previously, the start of the root pointer section was at the very beginning
of the mp_state_ctx_t struct (which is the beginning of mp_state_thread_t).
This was the original assembler version of the NLR code was hard-coded to
have the nlr_top pointer at the start of this state structure. But now
that the NLR code is partially written in C there is no longer this
restriction on the location of nlr_top (and a comment to this effect has
been removed in this patch).
So now the root pointer section starts part way through the
mp_state_thread_t structure, after the entries which are not root pointers.
This patch also moves the non-pointer entries for MICROPY_ENABLE_SCHEDULER
outside the root pointer section.
Moving non-pointer entries out of the root pointer section helps to make
the GC more precise and should help to prevent some cases of collectable
garbage being kept.
This patch also has a measurable improvement in performance of the
pystone.py benchmark: on unix x86-64 and stm32 there was an improvement of
roughly 0.6% (tested with both gcc 7.3 and gcc 8.1).
This macro is written out explicitly in the two locations that it is used
and then the code is optimised, opening possibilities for further
optimisations and reducing code size:
unix: -48
minimal CROSS=1: -32
stm32: -32
This adapts the allocation process to start from either end of the heap
when searching for free space. The default behavior is identical to the
existing behavior where it starts with the lowest block and looks higher.
Now it can also look from the highest block and lower depending on the
long_lived parameter to gc_alloc. As the heap fills, the two sections may
overlap. When they overlap, a collect may be triggered in order to keep
the long lived section compact. However, free space is always eligable
for each type of allocation.
By starting from either of the end of the heap we have ability to separate
short lived objects from long lived ones. This separation reduces heap
fragmentation because long lived objects are easy to densely pack.
Most objects are short lived initially but may be made long lived when
they are referenced by a type or module. This involves copying the
memory and then letting the collect phase free the old portion.
QSTR pools and chunks are always long lived because they are never freed.
The reallocation, collection and free processes are largely unchanged. They
simply also maintain an index to the highest free block as well as the lowest.
These indices are used to speed up the allocation search until the next collect.
In practice, this change may slightly slow down import statements with the
benefit that memory is much less fragmented afterwards. For example, a test
import into a 20k heap that leaves ~6k free previously had the largest
continuous free space of ~400 bytes. After this change, the largest continuous
free space is over 3400 bytes.
This patch introduces the MICROPY_ENABLE_PYSTACK option (disabled by
default) which enables a "Python stack" that allows to allocate and free
memory in a scoped, or Last-In-First-Out (LIFO) way, similar to alloca().
A new memory allocation API is introduced along with this Py-stack. It
includes both "local" and "nonlocal" LIFO allocation. Local allocation is
intended to be equivalent to using alloca(), whereby the same function must
free the memory. Nonlocal allocation is where another function may free
the memory, so long as it's still LIFO.
Follow-up patches will convert all uses of alloca() and VLA to the new
scoped allocation API. The old behaviour (using alloca()) will still be
available, but when MICROPY_ENABLE_PYSTACK is enabled then alloca() is no
longer required or used.
The benefits of enabling this option are (or will be once subsequent
patches are made to convert alloca()/VLA):
- Toolchains without alloca() can use this feature to obtain correct and
efficient scoped memory allocation (compared to using the heap instead
of alloca(), which is slower).
- Even if alloca() is available, enabling the Py-stack gives slightly more
efficient use of stack space when calling nested Python functions, due to
the way that compilers implement alloca().
- Enabling the Py-stack with the stackless mode allows for even more
efficient stack usage, as well as retaining high performance (because the
heap is no longer used to build and destroy stackless code states).
- With Py-stack and stackless enabled, Python-calling-Python is no longer
recursive in the C mp_execute_bytecode function.
The micropython.pystack_use() function is included to measure usage of the
Python stack.
Accessing them will crash immediately instead still working for some time,
until overwritten by some other data, leading to much less deterministic
crashes.
These checks are assumed to be true in all cases where gc_realloc is
called with a valid pointer, so no need to waste code space and time
checking them in a non-debug build.
Scott Shawcroft
microDev
Damien George
stijn
Emil Renner Berthing
Diego Elio Pettenò
Damien George
David Lechner
Dan Halbert
Jeff Epler
David Grimes
Paul Sokolovsky
Ayke van Laethem
Scott Shawcroft