1280e9122b
Doc tweaks to clarify external libraries, new boards and add HID library.
2017-05-24 11:44:23 -07:00
3cad7b7b03
atmel-samd: correctly reset the REPL history on reload. Fixes #141
2017-05-24 10:53:52 -07:00
b444788451
Merge pull request #135 from robomike/pins
...
Renamed spi flash to ext flash not to confuse with the actual spi flash
2017-05-23 11:43:20 -07:00
517590a58a
atmel-samd:renamed spi flash to confuse with the actual spi flash
2017-05-23 14:09:28 -04:00
907188972c
Merge pull request #138 from dhalbert/add-ure-et-al
...
Enable ure, center, partition, frozenset, splitlines, reversed for Express builds.
2017-05-21 22:00:19 -07:00
5c7071e92a
Merge branch 'master' into add-ure-et-al
2017-05-21 23:20:47 -04:00
eeced45bed
Remove code size check. Its causing builds to fail because the new GCC made it slightly larger.
2017-05-21 07:53:19 -07:00
253bdf7739
Enable ure, center, partition, frozenset, splitlines, reversed for Express builds.
2017-05-20 14:02:37 -04:00
0a6bed491f
atmel-samd: Enable autoreload by default again.
2017-05-20 08:11:06 -07:00
d275d5bcf7
Update README with new boards and new differences.
2017-05-16 11:15:35 -07:00
b1925b1bd8
atmel-samd: Fixup autoreset after switching boot to running once.
2017-05-15 20:21:26 -07:00
3f5028c666
atmel-samd: Support wav file playback. Tested up to 16bit 22.1khz. Must be mono file!
...
SD card support may work but likely needs buffer tuning. Its untested.
Fixes #105
2017-05-15 19:52:38 -07:00
292ba89ac2
tools: Make now runs uf2conv itself.
2017-05-15 15:44:43 -07:00
974847ac8d
atmel-samd: Add a safe mode which detects hard faults and reboots without running user code again.
2017-05-15 15:29:04 -07:00
790c38e18c
atmel-samd: Rework boot, main and REPL order.
...
Boot will only run once now before USB is started. Its output goes to
boot_out.txt. After main and REPL will run with VM and hardware resets
between each.
2017-05-12 18:26:14 -07:00
7672bf7736
atmel-samd: Rename auto-reset to auto-reload to reduce confusion with physical reset buttons.
2017-05-12 16:45:38 -07:00
e0f931afd3
atmel-samd: Fix pin reset to ensure USB and SWD are not reset.
2017-05-12 16:09:13 -07:00
e1a6f6d584
atmel-samd: Rework SPI flash defines for clarity.
...
Also add sector protection support for the SAMD Xplained board.
2017-05-12 14:47:39 -07:00
7ea76e0889
atmel-samd: Pin reset improvements.
...
* Reset SWD lines to SWD rather than GPIO. This makes OpenOCD happier.
* Default speaker enable lines to False for CircuitPlayground to prevent
the speaker from buzzing when no sound is playing. Fixes #126
2017-05-12 13:14:01 -07:00
6984425f5d
atmel-samd: Correctly wait for the SPI DMA transaction to finish.
2017-05-12 13:13:50 -07:00
c138d0f025
Merge pull request #128 from ntoll/master
...
Rename LEFT_BUTTON -> BUTTON_A, RIGHT_BUTTON -> BUTTON_B.
2017-05-11 10:04:05 -07:00
f3152571c6
Rename LEFT_BUTTON -> BUTTON_A, RIGHT_BUTTON -> BUTTON_B.
2017-05-11 14:48:17 +01:00
ef1a4847b3
shared-bindings: Correct PulseIn.resume to match docs. Fixes #125
2017-05-08 11:14:23 -07:00
c6d539ace3
atmel-samd: Fix sporadic "syntax errors"
...
The GC was deleting memory that was in use because its scan of the
stack missed the very top. Switching to _estack fixes this by relying
on the location from the linker.
Fixes #124
2017-05-05 12:04:20 -07:00
5ad426124b
atmel-samd: Move heap objects into MICROPY_PORT_ROOT_POINTERS so they don't get garbage collected while we are using them.
2017-05-04 11:57:51 -07:00
6512ccf32e
atmel-samd: Use DMA for user SPI.
...
Also replace use of PINMUX_DEFAULT with PINMUX_UNUSED to prevent any
accidental pin changes. This caused user SPI to break internal SPI
flash on the Feather M0 Express.
Fixes #100
2017-05-03 10:50:29 -07:00
24a5752f94
atmel-samd: Use DMA for SPI flash block transfers.
...
Fixes #99
2017-05-02 15:25:06 -07:00
a2c463deb0
Update AudioOut.c
...
fiiiiiiiiiiiiiiiiiiiiiiiiix
2017-05-01 23:32:37 -04:00
7187132d24
tools: Switch method of detecting travis so that it works OK on CIs without artifacts saved.
2017-05-01 15:12:52 -07:00
dd64379c0d
py: Fix version header generation when no tags are available.
2017-05-01 15:12:52 -07:00
58b9789d0c
atmel-samd: Introduce audio sample playback via audioio.AudioOut.
2017-05-01 13:10:03 -07:00
30b8091df0
atmel-samd: Clean up leftovers from QTouch.
2017-05-01 11:32:15 -07:00
4ad22144b0
atmel-samd: Rename metro M0 Express and add NEOPIXEL pin.
2017-05-01 11:29:51 -07:00
541d22e8d0
Update the README with new links.
2017-04-25 11:28:47 -07:00
ef44cec1f1
travis: turn off artifact debug.
2017-04-20 17:02:59 -07:00
9a5ff7766e
travis: working_dir doesn't work as expected. Try and fix it.
2017-04-20 16:48:29 -07:00
bc152da3a6
atmel-samd: Remove debug prints from TouchIn
2017-04-20 16:48:04 -07:00
4c77f84034
travis: artifact upload tweaks.
2017-04-20 16:18:30 -07:00
f66fcbfa4f
travis: Don't try and build ESP8266
2017-04-20 15:14:37 -07:00
bac3a7dcc1
travis: Fix typo
2017-04-20 14:12:14 -07:00
98667b1af8
Turn on build saving and uf2 creation.
2017-04-20 14:04:06 -07:00
a9d25bfae4
atmel-samd: Update CircuitPlayground Express pins for Rev G.
2017-04-20 11:25:57 -07:00
939c0045db
Switch to a shared piece of code to compute start and length of a
...
buffer from start, end and length. The old code miscomputed length
leading to writing and reading from memory past the end of the buffer.
Consolidating the code should make it easier to get right everywhere.
2017-04-20 11:24:05 -07:00
076ff82c46
atmel-samd: Switch to https for freetouch submodule.
2017-04-18 12:34:03 -07:00
b97edd4465
atmel-samd: Turn on framebuf for Express boards because they have space.
2017-04-18 09:44:04 -07:00
8d0d5defc7
atmel-samd: Use LTO for all builds to get 5000 bytes back on express boards.
2017-04-18 09:44:04 -07:00
ca176535a9
esp8266: Fix busio.SPI to take both MOSI and MISO.
2017-04-18 09:44:04 -07:00
67ec52d7a9
atmel-samd: Swap out pulseio for touchio based on FreeTouch.
2017-04-18 09:44:04 -07:00
225fdb0307
Merge pull request #118 from dhalbert/master
...
atmel-samd: HID report descriptor for mouse had to be COMPILER_WORD_ALIGNED
2017-04-15 11:05:48 -07:00
2fe6b74e90
atmel-samd: HID report descriptor for mouse had to be COMPILER_WORD_ALIGNED.
2017-04-15 10:18:56 -04:00
Scott Shawcroft
robomike
Dan Halbert
Nicholas H.Tollervey
Limor "Ladyada" Fried