Commit Graph

13193 Commits

Author SHA1 Message Date
Damien George 11b77263ef stm32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 9a3e1a1808 mimxrt/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 20bfae1471 qemu-arm/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 94077c6402 samd/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 818be10bb5 zephyr/moduos: Convert module to use extmod version.
This also adds uos.unlink(), for all ports that use extmod/moduos.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 1c53d85162 esp32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 926b554daf extmod/moduos: Create general uos module to be used by all ports.
Based on the rp2 port version, with the rp2 port converted to use this
module.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
iabdalkader 507ad03329 rp2: Add USB MSC support.
It is currently not enabled by default on any board.
2022-03-09 00:38:07 +11:00
Daniël van de Giessen e2513bfe8d extmod/moduzlib: Fix parsing zlib header dict size.
From RFC 1950 section 2.2: "CINFO is the base-2 logarithm of the LZ77
window size, minus eight (CINFO=7 indicates a 32K window size)"

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2022-03-08 23:16:14 +11:00
robert-hh e0b97013d0 mimxrt/hal/pwm_backport: Make PWM symmetric, and round division calcs.
Ensure the symmetry of PWM: the duty rate of X and Q channels was not 50%,
when it should have been.  That is evident at high frequencies, like 15Mhz
or 37.5 MHz.  At low frequencies the deviation mattered less.  The A/B
channels were fine.

Also round up or down non-integer division factors. Before, always the
floor value was used.
2022-03-08 23:11:17 +11:00
robert-hh 4774501cab mimxrt/eth: Avoid a race condition for Ethernet.
That caused Ethernet to lock up at high data rates after ~200MByte data
average in a row.  Tested now with data bursts up to 10 GByte and overall
data rates of ~8MByte/s at the Eth100 port.
2022-03-08 23:11:01 +11:00
robert-hh 04f92a2825 mimxrt/boards: Support using an optional board-specific manifest.py.
If the board directory contains a manifest.py file, it will be included.
File not found errors will be ignored.
2022-03-08 23:10:41 +11:00
robert-hh c72dfbcef9 mimxrt/boards/TEENSY41: Use the same SPI1 pins for Teensy 4.0 and 4.1.
Teensy 4.1 used different pins for SPI1 than Teensy 4.0, which made the
boards unnecessarily different.
2022-03-08 23:09:47 +11:00
robert-hh b0d460cd7d mimxrt/eth: Fix an Ethernet transmit error.
Sometimes frames could not be sent immediately because the controller was
still busy with previous frames.  Then, an error was returned to lwip.
This fix adds a limited number of retries for this busy state, waiting
100µs before the next attempt.  Typically the transmit succeeds now at the
second attempt.

Second change: Reset the controller for a clean state after soft reset.
2022-03-08 23:09:17 +11:00
robert-hh 5ea85b7a85 mimxrt/boards: Add board files for MIMXRT1015 and MIMXRT1015_EVK.
OCOTP_Init() has been removed from mphalport.c.  The library files are
missing for the MIMXRT1015, and for just reading the OCOTP the Init is not
required.
2022-03-08 23:08:44 +11:00
robert-hh 5cc50b9f1c mimxrt/machine_spi: Add omitted GPIO config.
The method was changed, but not for the CSx pins.  No functional change.
2022-03-08 23:08:30 +11:00
Philipp Ebensberger 62cb2069bb mimxrt/machine_pin: Change pin drive constants to DRIVE_x naming.
Updated DRIVE_x constants representing pin drive strength.

Signed-off-by: Philipp Ebensberger
2022-03-08 22:30:33 +11:00
Jonathan Hogg 3ebc370344 docs/library/machine.Pin: Update to use preferred DRIVE_x constants.
Update documents with new common names for the drive strength constants.
2022-03-07 23:47:45 +11:00
Jonathan Hogg 4c7c80d626 docs/esp32/quickref: Document GPIO drive strength.
Add brief documentation of the new `drive` keyword argument.
2022-03-07 23:41:29 +11:00
Jonathan Hogg 33083bf527 esp32/machine_pin: Add support for pin drive strength.
Add support for configuring drive strength of output pins with `drive` 
keyword argument and `DRIVE_*` constants.
2022-03-07 23:41:29 +11:00
Damien George 3440201e2e tests/micropython: Switch from set.pop to raise-0 to test exc strings.
To not rely on sets, which are an optional feature.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 16:48:35 +11:00
Damien George 9a8ee6a5df tests/run-tests.py: Include test files ending in _set as set tests.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 16:48:35 +11:00
Damien George cced9a0128 zephyr/prj.conf: Enable CONFIG_BUILD_OUTPUT_HEX to generate .hex output.
The .hex file contains more information than .bin, useful for flashing.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 16:48:35 +11:00
Maureen Helm 474d288e55 zephyr: Upgrade to Zephyr v3.0.0.
Updates the Zephyr port build instructions and CI to use the latest
Zephyr release tag.

Signed-off-by: Maureen Helm <maureen.helm@intel.com>
2022-03-07 16:48:35 +11:00
Maureen Helm 86a4a52670 zephyr: Update include path to disk_access.h.
The disk_access header was moved to a different path in Zephyr v2.6.0.
The old path was deprecated for two releases (v2.6.0 and v2.7.0) and
will no longer be supported after Zephyr v2.7.0.

Signed-off-by: Maureen Helm <maureen.helm@intel.com>
2022-03-07 16:48:35 +11:00
Damien George bf01671a96 tools/mpremote: Bump version to 0.2.0.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 16:02:55 +11:00
Damien George 7cd166ff92 tests/basics: Add test for creating small-ints in nan-box builds.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 15:25:11 +11:00
Damien George bb2bd071f7 docs/library/esp32.rst: Mark esp32.Partition as not taking kw args.
Fixes issue #8380.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-07 15:15:45 +11:00
David Lechner eadc927baf docs/differences/python_35: Mark PEP 486 as not applicable.
This adds the "Not relevant" designation to PEP 486 since it has to do with
the Python Launcher for Windows and not the Python language itself.

Also fix a typo while we are touching this line.

Signed-off-by: David Lechner <david@pybricks.com>
2022-03-07 14:15:21 +11:00
Jan 5d9171b5cc docs/library/machine.UART.rst: Add details for `invert` parameter. 2022-03-07 14:12:50 +11:00
robert-hh d696d9141e esp32/machine_uart: Make UART.init preserve unspecified parameters.
Most of the settings behaved that way, except for baudate, timeout,
timout_char, invert and flow.
2022-03-07 13:45:50 +11:00
robert-hh 55a0125a15 esp32/machine_pwm: Always set the duty cycle when setting the frequency.
If setting the frequency to a value used already by an existing timer, this
timer will be used.  But still, the duty cycle for that channel may have to
be changed.

Fixes issues #8306 and #8345.
2022-03-07 13:37:23 +11:00
Daniël van de Giessen 665f0e2a68 esp32: Sleep one tick in MICROPY_EVENT_POLL_HOOK.
If MicroPython threads are enabled, loops waiting for an incoming event
should release the GIL and suspend, allowing other tasks to run while they
wait.

Prior to this commit, the problem can easily be observed by running a
thread that is both busy and regularly releases the GIL (for example a loop
doing something then sleeping a few ms after each iteration).  When the
main task is at the REPL, the thread is significantly stalled.  If the main
task is manually made to release the GIL (for example, by calling
utime.sleep_ms(500)) the other thread can be seen immediately working at
the expected speed again.

Additionally, there are various instances in where blocking functions run
MICROPY_EVENT_POLL_HOOK in a loop while they wait for a certain event/
condition.  For example the uselect methods poll objects to determine
whether data is available, but uses 100% of CPU while it does, constantly
calling MICROPY_EVENT_POLL_HOOK in the process.

The MICROPY_EVENT_POLL_HOOK macro is only ever used in waiting loops, where
(if threads are enabled) it makes sense to yield for a single tick so that
these loops do not consume all CPU cycles but instead other threads may
execute.  (In fact, the thing these loops wait for may even indirectly or
directly depend on another task being able to run.)

This change moves the sleep that was inside the REPL input function to
inside the MICROPY_EVENT_POLL_HOOK macro, where the GIL is already being
released, solving both the blocking REPL issue and the 100% CPU use issue
at the same time.

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2022-03-02 12:57:43 +11:00
Andrew Leech 919e586e46 esp32/machine_uart: Allow limited configuration of REPL UART.
Some applications may want to adjust the hard coded 115200 REPL buadrate,
and this commit allows it to be changed dynamically via machine.UART(0).
2022-03-01 18:16:50 +11:00
Andrew Leech 2cc9232781 esp32/uart: Correctly init low-level UART driver for REPL.
uart_driver_install() needs to be called to set up the UART correctly.
2022-03-01 17:33:36 +11:00
YoungJoon Chun 2d47020e15 rp2/mpthreadport: Fix memory corruption when thread is created in core1.
The stack (and arg) of core1 is itself a root pointer, not just the entries
in it.  Without this fix the GC could reclaim the entire stack (and
argument object).

Fixes issues #7124 and #7981.
2022-03-01 17:03:57 +11:00
stijn 795370ca23 py/bc.h: Fix C++ compilation of public API.
Casts between unrelated types must be explicit.  Regression in
f2040bfc7e
2022-03-01 16:17:30 +11:00
Damien George 3c2aa5ff93 unix/.gitignore: Remove *.py from ignore list.
.py files are valid source files and shouldn't be ignored.  This line was
from the early days when .py files in the unix directory were used for
testing.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-28 19:02:58 +11:00
Damien George 8626dcd623 tools/ci.sh: Run performance benchmark as part of all unix test runs.
This tests that the performance benchmarks run without error.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-28 19:02:58 +11:00
Damien George c4b8dae438 tests/unix: Add coverage test for freezing various objects.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-28 19:02:58 +11:00
robert-hh 5c46721a1c tools/mpy-tool.py: Fix frozen comment generation to escape chars.
That caused the compile of frozen_content.c to fail if characters like
backslash were in a short string.  Thanks to @hippy for identifying the
spot to change.
2022-02-28 18:47:24 +11:00
Damien George 0a217624e1 tools/upip.py: Remove unused op_basename() function.
It seems this was never used, at least not since its inclusion in this
repository.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-25 18:24:03 +11:00
Damien George 546e213265 esp32/boards: Add specific deploy instructions for S3 variant.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-25 16:52:58 +11:00
stijn c2e8a5acd2 windows: Unify project file headers.
The xmlns attribute is required for older msbuild version (e.g. for
VS2015).  Add it where needed, and reorder the attributes so all
files look the same.
2022-02-25 16:41:11 +11:00
Damien George d6564a3159 tools/mpremote: Add "umount" command.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-25 13:10:45 +11:00
Damien George ad1f523e7e tools/mpremote: Add "resume" and "soft-reset" commands.
This makes the auto soft-reset behaviour of mpremote more logical, and now
configurable via these new commands.

Signed-off-by: Damien George <damien@micropython.org>
2022-02-25 13:09:28 +11:00
Damien George 414b59d39c qemu-arm: Add tests for freezing viper and asm_thumb code.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:29:02 +11:00
Damien George 0a2895b099 tests/perf_bench: Skip bm_chaos test if random.randrange is unavailable.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:29:02 +11:00
Damien George 66fc0f45c1 tools/ci.sh: Run urandom test scripts as part of native module tests.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:29:02 +11:00
Damien George 73a1927fce github/workflows: Add new workflow to test .mpy file format and tools.
Signed-off-by: Damien George <damien@micropython.org>
2022-02-24 18:29:02 +11:00