Commit Graph

103 Commits

Author SHA1 Message Date
sommersoft 4e1f7d43eb added exception for PULL_UP; corrected open_drain handling 2018-04-27 02:51:07 +00:00
sommersoft 441ce2a78f reset GPIO16 to input on deinit 2018-04-26 01:35:58 +00:00
sommersoft bd5a5daaae updated GPIO16 construct and handling 2018-04-25 03:59:36 +00:00
sommersoft e70ece4c41 now checks for proper pin in is_pin_free; initialize GPIO16 as input in reset_pins 2018-04-25 03:57:09 +00:00
Dan Halbert 04b2c8be5a remove unnecessary includes in esp8266 common-hal storage code 2018-04-10 12:13:21 -04:00
Dan Halbert 5f98953ed8 esp8266 and nrf: raise NotImplementedError 2018-04-10 12:08:41 -04:00
Jeff Epler 1e9a27177c esp8266: Disable "strict aliasing" in compiler like in atmel-samd
This caused a fatal compiler diagnostic after #750.  This compiler
flag is already specified in the atmel-samd builds, so it makes
sense to do it here for the same reasons.
2018-04-09 22:23:39 -04:00
Jeff Epler d69ef6bfd3 esp8266/etshal: delete incorrect function prototypes
these are function prototypes not used in circuitpython.  The
declarations began to conflict with ones in the upstream SDK
at some point, so delete them.
2018-04-06 20:37:48 -05:00
Paul Sokolovsky 4982a3ad32 esp8266/esp8266_common.ld: Put .text of more libs into .irom0.text .
Recent vendor SDKs ship libs with code in .text section, which previously
was going into .irom0.text. Adjust the linker script to route these
sections back to iROM (follows upstream change).
2018-04-06 20:37:41 -05:00
Jeff Epler abec199c19 Enable high-quality float hash
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.

Closes: #704
2018-03-27 21:56:30 -05:00
Jeff Epler 355bf8b553 Conditionally compile out nonstandard array/struct typecodes
.. defaulting to off for circuitpython-supported boards, on for others.

.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
2018-03-26 18:13:49 -05:00
Damien George 033c32e694 esp8266/esp_mphal.h: Fix I2C glitching by using input mode for od_high.
Certain pins (eg 4 and 5) seem to behave differently at the hardware level
when in open-drain mode: they glitch when set "high" and drive the pin
active high for a brief period before disabling the output driver.  To work
around this make the pin an input to let it float high.
2018-03-12 12:45:09 +11:00
Damien George 58ebeca6a9 drivers/bus: Pull out software SPI implementation to dedicated driver.
This patch takes the software SPI implementation from extmod/machine_spi.c
and moves it to a dedicated file in drivers/bus/softspi.c.  This allows the
SPI driver to be used independently of the uPy runtime, making it a more
general component.
2018-03-10 00:59:43 +11:00
Olivier Ortigues b691aa0aae esp8266/esppwm: Always start timer to avoid glitch from full to nonfull.
The PWM at full value was not considered as an "active" channel so if no
other channel was used the timer used to mange PWM was not started.  So
when another duty value was set the PWM timer restarted and there was a
visible glitch when driving LEDs.  Such a glitch can be seen with the
following code (assuming active-low LED on pin 0):

    p = machine.PWM(machine.Pin(0))
    p.duty(1023) # full width, LED is off
    p.duty(1022) # LED flashes brightly then goes dim

This patch fixes the glitch.
2018-03-05 11:39:44 +11:00
Scott Shawcroft bf05183158 Merge remote-tracking branch 'adafruit/2.x' into merge_2x 2018-02-27 15:24:16 -08:00
Damien George c5fe610ba1 esp8266/modnetwork: Implement WLAN.status('rssi') for STA interface.
This will return the RSSI of the AP that the STA is connected to.
2018-02-26 16:41:13 +11:00
Damien George 01dcd5bb71 esp8266/uart: Allow to compile with event-driven REPL. 2018-02-26 16:10:27 +11:00
Dan Halbert 907b4417c0 Add .baudrate support to ESP8266.
busio.UART on ESP8266 provides a TX-only UART on GPIO2.
Fixed some bugs in the implementation.
2018-02-24 15:45:15 -05:00
Damien George 82828340a0 ports: Enable ucollections.deque on relevant ports.
These ports are all capable of running uasyncio.
2018-02-21 22:55:13 +11:00
Olivier Ortigues 359d2bdf84 esp8266/README.md: Update build instruction to reflect new ports dir. 2018-02-15 11:14:52 +11:00
Olivier Ortigues 5c83d05b49 esp8266/esppwm: Clip negative duty numbers to 0.
Prior to this patch a negative duty would lead to full PWM.
2018-02-15 11:12:41 +11:00
Damien George a40ce1d829 esp8266/modules: Move dht.py driver to drivers/dht directory. 2018-01-31 18:11:06 +11:00
Dan Halbert e550b024c5 atmel-samd: Correct computation of SPI baud rate.
all: Add .frequency read-only property for busio.SPI to return actual frequency.

Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
sommersoft fe851fc15e re-added header inlcusion for system_get_chip_id 2018-01-23 13:50:24 -08:00
sommersoft 44bc1711aa Added Unique ID Functions/Updated Support Matrix (#527)
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448.

shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes #462.
2018-01-18 11:39:11 -08:00
Dan Halbert 01443a9619 Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf.
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
2018-01-16 18:11:54 -08:00
Dan Halbert 065e82015f merge from 2.2.0 + fix up board defs 2018-01-02 21:25:41 -05:00
Damien George 9bcdb0acd1 esp8266/Makefile: Remove commented-out unused lines.
These were copied from the stm32 port (then stmhal) at the very beginning
of this port, with the anticipation that the esp8266 port would have board
definition files with a list of valid pins and their names.  But that has
not been implemented and likely won't be, so remove the corresponding lines
from the Makefile.
2017-12-22 17:16:42 +11:00
Damien George badaf3ecfe esp8266/machine_hspi: After an SPI write wait for last byte to transfer.
Because otherwise the function can return with data still waiting to be
clocked out, and CS might then be disabled before the SPI transaction is
complete.  Fixes issue #3487.
2017-12-14 10:43:18 +11:00
Paul Sokolovsky 3a431fba50 esp8266/modnetwork: Make sure to intern string passed to .config("param").
This is the proper fix for
https://github.com/micropython/micropython/issues/3442.
2017-12-04 00:13:10 +02:00
Damien George 4e056d82cc esp8266/modules/webrepl_setup: Fix first-time enable of WebREPL.
Prior to this fix, enabling WebREPL for the first time via webrepl_setup
did not work at all because "boot.py" did not contain any lines with
"webrepl" in them that could be uncommented.
2017-11-30 10:54:33 +11:00
Damien George 4601759bf5 py/objstr: Remove "make_qstr_if_not_already" arg from mp_obj_new_str.
This patch simplifies the str creation API to favour the common case of
creating a str object that is not forced to be interned.  To force
interning of a new str the new mp_obj_new_str_via_qstr function is added,
and should only be used if warranted.

Apart from simplifying the mp_obj_new_str function (and making it have the
same signature as mp_obj_new_bytes), this patch also reduces code size by a
bit (-16 bytes for bare-arm and roughly -40 bytes on the bare-metal archs).
2017-11-16 13:17:51 +11:00
Paul Sokolovsky 964bf935a3 esp8266/esp8266_common.ld: Put .text of more libs into .irom0.text .
Recent vendor SDKs ship libs with code in .text section, which previously
was going into .irom0.text. Adjust the linker script to route these
sections back to iROM (follows upstream change).
2017-11-14 09:24:33 +02:00
Paul Sokolovsky 0535d03370 esp8266/README: Add section on using upip. 2017-11-12 18:34:56 +02:00
Paul Sokolovsky 9c209e4d09 esp8266/README: Emphasize the need to change default WiFi password. 2017-11-12 18:34:46 +02:00
Paul Sokolovsky 1b146e9de9 py/mpconfig: Introduce reusable MP_HTOBE32(), etc. macros.
Macros to convert big-endian values to host byte order and vice-versa.
These were defined in adhoc way for some ports (e.g. esp8266), allow
reuse, provide default implementations, while allow ports to override.
2017-11-08 19:47:37 +02:00
Jerry Needell e2867eb4e9 enable framebuf for ESP8266 2017-11-06 14:54:54 -08:00
Paul Sokolovsky e766a4af4a esp8266/etshal.h: Make function prototypes compatible with ESP SDK 2.1.0+.
In the vendor SDK 2.1.0, some of the functions which previously didn't
have prototypes, finally acquired them. Change prototypes on our side
to match those in vendor headers, to avoid warnings-as-errors.
2017-11-05 00:29:33 +02:00
Scott Shawcroft 7b393bc406 Merge tag 'v1.9.3'
Introduction of ports subdirectory where all ports are moved to

The main change in this release is the introduction of a "ports/"
subdirectory at the top-level of the repository, and all of the ports are
moved here.  In the process the "stmhal" port is renamed to "stm32" to
better reflect the MCU that it targets.  In addition, the STM32 CMSIS and
HAL sources are moved to a new submodule called "stm32lib".

The bytecode has changed in this release, compared to the previous release,
and as a consequence the .mpy version number has increased to version 3.
This means that scripts compiled with the previous mpy-cross must be
recompiled to work with this new version.

There have also been various enhancements and optimisations, such as:
check for valid UTF-8 when creating str objects, support for reverse
special binary operations like __radd__, full domain checking in the math
module, support for floor-division and modulo in the viper emitter,
and addition of stack overflow checking when executing a regex.

The stm32 port sees improved support for F7 MCUs, addition of a new board
B_L475E_IOT01A based on the STM32L475, and support for the Wiznet W5500
chipset along with improved socket behaviour.

A detailed list of changes follows.

py core:
- objstr: startswith, endswith: check arg to be a string
- nlrx86,x64: replace #define of defined() with portable macro usage
- objtype: handle NotImplemented return from binary special methods
- objtype: mp_obj_class_lookup: improve debug logging
- map: remove unused new/free functions
- make m_malloc_fail() have void return type, since it doesn't return
- modstruct: in struct.pack, stop converting if there are no args left
- modstruct: check and prevent buffer-read overflow in struct unpacking
- modstruct: check and prevent buffer-write overflow in struct packing
- nlrthumb: get working again on standard Thumb arch (ie not Thumb2)
- objfloat: fix binary ops with incompatible objects
- obj: fix comparison of float/complex NaN with itself
- objtype: implement fallback for instance inplace special methods
- objtuple: properly implement comparison with incompatible types
- objstr: add check for valid UTF-8 when making a str from bytes
- objlist: properly implement comparison with incompatible types
- runtime0.h: move relational ops to the beginning of mp_binary_op_t
- runtime0.h: move MP_BINARY_OP_DIVMOD to the end of mp_binary_op_t
- objtype: make sure mp_binary_op_method_name has full size again
- runtime0.h: put inplace arith ops in front of normal operations
- builtinhelp: simplify code slightly by extracting object type
- runtime: implement dispatch for "reverse op" special methods
- nlrx86: fix building for Android/x86
- builtinhelp: change signature of help text var from pointer to array
- runtime.h: change empty mp_warning macro so var-args are non empty
- modbuiltins: implement abs() by dispatching to MP_UNARY_OP_ABS
- {objfloat,objcomplex}: optimise MP_UNARY_OP_ABS by reusing variables
- mpconfig.h: add note that using computed gotos in VM is not C99
- objstr: strip: don't strip "\0" by default
- objexcept: prevent infinite recursion when allocating exceptions
- stream: remove unnecessary checks for NULL return from vstr_add_len
- vstr: raise a RuntimeError if fixed vstr buffer overflows
- vm: use lowercase letter at start of exception message
- persistentcode: define mp_raw_code_save_file() for any unix target
- add config option to print warnings/errors to stderr
- objfloat: support raising a negative number to a fractional power
- objset: simplify set and frozenset by separating their locals dicts
- objset: check that RHS of a binary op is a set/frozenset
- objset: include the failed key in a KeyError raised from set.remove
- objtype: change type of enum-to-qstr table to uint16_t to save space
- objstr: make empty bytes object have a null-terminating byte
- mpprint: only check for null string printing when NDEBUG not defined
- objtype: clean up unary- and binary-op enum-to-qstr mapping tables
- persistentcode: bump .mpy version number to version 3
- bc: update opcode_format_table to match the bytecode
- modmath: add full checks for math domain errors
- modmath: convert log2 macro into a function
- formatfloat: don't print the negative sign of a NaN value
- formatfloat: use standard isinf, isnan funcs instead of custom ones
- modbuiltins: use existing utf8_get_char helper in builtin ord func
- emitnative: implement floor-division and modulo for viper emitter
- objtype: use CPython compatible method name for sizeof
- objtype: fit qstrs for special methods in byte type
- objtype: define all special methods if requested
- objtype: introduce MICROPY_PY_ALL_INPLACE_SPECIAL_METHODS

extmod:
- modubinascii: only include uzlib/tinf.h when it's really needed
- modussl_mbedtls: allow to compile with MBEDTLS_DEBUG_C disabled
- machine_pinbase: put PinBase singleton in ROM
- re1.5: upgrade to v0.8.2, adds hook for stack overflow checking
- modure: add stack overflow checking when executing a regex
- uos_dupterm: update uos.dupterm() and helper funcs to have index
- uos_dupterm: swallow any errors from dupterm closing the stream
- vfs: replace VLA in proxy func with small, static sized array
- modussl: add finaliser support for ussl objects
- modussl_mbedtls: allow to compile with unix coverage build

lib:
- add new submodule, stm32lib containing STM32 CMSIS and HAL source
- embed/abort_: use mp_raise_msg helper function
- libm: fix tanhf so that it correctly handles +/- infinity args
- libm: remove implementation of log2f, use MP_NEED_LOG2 instead
- axtls: update, support for SSL_EAGAIN return code
- berkeley-db-1.xx: update, allow to override MINCACHE, DEFPSIZE

drivers:
- memory/spiflash: change from hard-coded soft SPI to generic SPI
- display/ssd1306.py: improve performance of graphics methods
- nrf24l01: make nRF24L01 test script more portable
- display/ssd1306: implement SSD1306_I2C poweron method
- display/ssd1306: make poweron() work the same with SSD1306_SPI
- wiznet5k: improve the performance of socket ops with threading
- wiznet5k: get low-level W5500 driver working

tools:
- upip: upgrade to 1.2.2
- pyboard: use repr() when quoting data in error messages
- pyboard: update docstring for additional device support

tests:
- object_new: better messages, check user __new__() method
- class_new: add checks for __init__ being called and other improvements
- class_new: add another testcase for __new__/__init__ interaction
- class_inplace_op: test for inplace op fallback to normal one
- run-bench-tests: update locations of executables, now in ports/
- class_reverse_op: test for reverse arith ops special methods
- run-tests: skip class_inplace_op for minimal profile
- run-tests: fix copy-paste mistake in var name
- cpydiff: add cases for locals() discrepancies
- extmod: add test for ure regexes leading to infinite recursion
- extmod: add test for '-' in character class in regex
- run-tests: close device under test using "finally"
- net_inet: update tls test to work with CPython and incl new site

unix port:
- rename modsocket.c to modusocket.c
- modusocket: remove #if MICROPY_SOCKET_EXTRA code blocks
- enable MICROPY_PY_REVERSE_SPECIAL_METHODS

stm32 port:
- modmachine: make machine.bootloader() work when MPU is enabled
- modmachine: improve support for sleep/deepsleep on F7 MCUs
- compute PLL freq table during build instead of at run time
- modmachine: for F7 MCU, save power by reducing internal volt reg
- boards/pllvalues.py: make script work with both Python 2 and 3
- Makefile: use lib/stm32lib instead of local cmsis and hal files
- remove cmsis and hal files, they are now a submodule
- Makefile: automatically fetch stm32lib submodule if needed
- update to new STM Cube HAL library
- fix clock initialisation of L4 MCUs
- rename stmhal port directory to stm32
- remove unused usbd_msc.c file
- boards: change remaining stm32f4xx_hal_conf.h to unix line ending
- boards: change linker scripts to use "K" instead of hex byte size
- boards: fix I2C1 pin mapping on NUCLEO_F401RE/F411RE boards
- i2c: when scanning for I2C devices only do 1 probe per address
- modnwwiznet5k: release the GIL on blocking network operations
- boards: add new board B_L475E_IOT01A based on STM32L475
- make-stmconst.py: make sure mpz const data lives in ROM
- timer: make pyb.Timer() instances persistent
- mpconfigport.h: add configuration for max periphs on L4 series
- usbdev: make the USBD callback struct const so it can go in ROM
- usbdev: change static function variable to non-static
- usbdev: put all CDC state in a struct
- usbdev: put all HID state in a struct
- usbdev: simplify CDC tx/rx buffer passing
- usbdev: simplify HID tx/rx buffer passing
- usbdev/core: add state parameter to all callback functions
- usbdev: put all state for the USB device driver in a struct
- usbdev: simplify pointers to MSC state and block dev operations
- usbdev: merge all global USB device state into a single struct
- usbdev: make device descriptor callbacks take a state pointer
- usbdev: move all the USB device descriptor state into its struct
- timer: enable ARPE so that timer freq can be changed smoothly
- modnwwiznet5k: get the IP address of an established socket
- boards: fix typos in stm32f767_af.csv table
- usbd_cdc_interface: don't reset CDC output buf on initialisation
- modnwwiznet5k: implement WIZNET5K.isconnected() method
- modusocket: make getaddrinfo() work when passed an IP address
- modusocket: return OSError(-2) if getaddrinfo fails
- mpconfigport.h: add MICROPY_THREAD_YIELD() macro
- modnwwiznet5k: add support for W5500 Ethernet chip
- modnwwiznet5k: increase SPI bus speed to 42MHz
- modnwwiznet5k: implement stream ioctl for the Wiznet driver
- mphalport: improve efficiency of mp_hal_stdout_tx_strn_cooked
- make uos.dupterm() conform to specs by using extmod version

cc3200 port:
- enable micropython.kbd_intr() method
- use standard implementation of keyboard interrupt

esp8266 port:
- rename axtls_helpers.c to posix_helpers.c
- posix_helpers: set ENOMEM on memory alloc failure
- set DEFPSIZE=1024, MINCACHE=3 for "btree" module
- esp_mphal: send data in chunks to mp_uos_dupterm_tx_strn
- modnetwork: add "bssid" keyword arg to WLAN.connect() method
- modules/webrepl_setup: add info about allowed password length

zephyr port:
- Makefile: revamp "test" target after ports were moved to ports/
- use CONFIG_NET_APP_SETTINGS to setup initial network addresses
- switch to interrupt-driven pull-style console

pic16bit port:
- add definition of SEEK_SET to unistd.h

docs:
- pyboard/tutorial: add "timeout=0" to UART in pass-through example
- more xrefs to "MicroPython port" in glossary
- library/network: fix ref to "socket" module (should be "usocket")
- machine.Signal: improve style/grammar and add usage example
- library: add description of "index" parameter to uos.dupterm()
- library/micropython: fix typo in RST formatting
- library/framebuf.rst: generalise constructor to all colour formats
- btree: describe page caching policy of the underlying implementation
- esp8266/tutorial: update neopixel with example of using 4 bbp
- library/network: clarify usage of "bssid" arg in connect() method
- pyboard/quickref: add info for Switch, RTC, CAN, Accel classes
- pyboard/tutorial: update now that yellow LED also supports PWM
- esp8266/quickref: add quickref info for RTC class
- library: add missing cross-ref links for classes in pyb module
- library/network: update docs to state that W5500 is supported
- uselect: document one-shot polling mode
- usocket: elaborate descriptions
- usocket: document inet_ntop(), inet_pton()
- library/network: add dhcp_hostname parameter
- reference/isr_rules: minor typo correction
- ussl: fix module name refs and use "MicroPython port" term
- esp8266/general: add section on TLS limitations
- usocket: document that settimeout() isn't supported by all ports
- ure: add "|" (alternative) to the list of supported operators
- reference/isr_rules.rst: add tutorial on use of micropython.schedule()

travis:
- use --upgrade when pip is installing cpp-coveralls
- update build command now that stm32 Wiznet config has changed

examples:
- hwconfig_console: add .on()/.off() methods

all:
- convert mp_uint_t to mp_unary_op_t/mp_binary_op_t where appropriate
- convert remaining "mp_uint_t n_args" to "size_t n_args"
- make new ports/ sub-directory and move all ports there
- update Makefiles and others to build with new ports/ dir layout
- remove inclusion of internal py header files
- use NULL instead of "" when calling mp_raise exception helpers

README:
- update "Dependencies" section
- add explicit section on contributing
- add gcc and arm-none-eabi-newlib to list of required components

.gitattributes:
- remove obsolete entries for stmhal/hal, stmhal/cmsis
- add entries for files that will move to ports/ dir
2017-11-02 12:41:50 -07:00
Scott Shawcroft d665334e94 esp8266: Fix includes 2017-10-24 23:05:20 -07:00
Scott Shawcroft 73c15dcf8b Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge
This is prep for merging in the NRF5 pull request.
2017-10-24 22:31:16 -07:00
Damien George f4059dcc0c all: Use NULL instead of "" when calling mp_raise exception helpers.
This is the established way of doing it and reduces code size by a little
bit.
2017-10-24 22:39:36 +11:00
Damien George 37282f8fc1 extmod/uos_dupterm: Update uos.dupterm() and helper funcs to have index.
The uos.dupterm() signature and behaviour is updated to reflect the latest
enhancements in the docs.  It has minor backwards incompatibility in that
it no longer accepts zero arguments.

The dupterm_rx helper function is moved from esp8266 to extmod and
generalised to support multiple dupterm slots.

A port can specify multiple slots by defining the MICROPY_PY_OS_DUPTERM
config macro to an integer, being the number of slots it wants to have;
0 means to disable the dupterm feature altogether.

The unix and esp8266 ports are updated to work with the new interface and
are otherwise unchanged with respect to functionality.
2017-10-13 20:01:57 +11:00
Vitor Massaru Iha 1b7d6a7951 esp8266/modules/webrepl_setup: Add info about allowed password length.
This patch also makes the code more concise by combining the checks for the
password length.
2017-10-11 11:37:01 +11:00
Damien George 6db132e130 esp8266/modnetwork: Add "bssid" keyword arg to WLAN.connect() method. 2017-10-09 23:09:06 +11:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George b00040c43c esp8266/esp_mphal: Send data in chunks to mp_uos_dupterm_tx_strn.
Sending byte-by-byte is inefficient and leads to errors in the WebSocket
protocol when sending utf-8 encoded characters.
2017-10-03 23:24:24 +11:00
Damien George da8c4c2653 py/builtinhelp: Change signature of help text var from pointer to array.
As a pointer (const char *) it takes up an extra word of storage which is
in RAM.
2017-09-12 16:03:52 +10:00
Paul Sokolovsky 9355cca610 esp8266: Set DEFPSIZE=1024, MINCACHE=3 for "btree" module.
Defaults of 4096 and 5 respectively are too high to esp8266, causing
out of memory with a database beyond couple of pages.
2017-09-10 13:54:00 +03:00
Paul Sokolovsky 9b4666dad5 esp8266/posix_helpers: Set ENOMEM on memory alloc failure.
POSIX requires malloc(), etc. to set ENOMEM on the failure, and e.g.
BerkeleyDB relies on this:

http://pubs.opengroup.org/onlinepubs/9699919799/functions/malloc.html

This should fix confusing OSError exceptions with 0 error code when
working with btree module.
2017-09-10 09:55:18 +03:00
Paul Sokolovsky 5671a11b81 esp8266: Rename axtls_helpers.c to posix_helpers.c.
As it's used by BerkeleyDB, etc.
2017-09-10 09:47:20 +03:00
Damien George 4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00