Commit Graph

1101 Commits

Author SHA1 Message Date
Ian Davies 1bf2fd0592 extmod/modussl_mbedtls: Set a more sensible default debug log level. 2022-08-06 00:11:46 +10:00
Ian Davies fbe9417b90 extmod/ntptime: Factor out ntptime module from esp8266 port.
The ntptime module was previously only included in the ESP8266 port.  This
commit factors that module out into the extmod directory, makes it support
different epochs, and includes it in the rp2 port.
2022-08-06 00:08:32 +10:00
Jim Mussared b22abcdbbe extmod/uasyncio: Handle gather with no awaitables.
This previously resulted in gather() yielding but with no way to be
resumed.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 18:16:19 +10:00
Jim Mussared e65d1e69e8 py/modio: Remove FileIO and TextIOWrapper from io module.
On ports with more than one filesystem, the type will be wrong, for example
if using LFS but FAT enabled, then the type will be FAT.  So it's not
possible to use these classes to identify a file object type.

Furthermore, constructing an io.FileIO currently crashes on FAT, and
make_new isn't supported on LFS.

And the io.TextIOWrapper class does not match CPython at all.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-26 17:58:01 +10:00
Jim Mussared 924e55aca1 extmod/webrepl: Allow the page to run from the device (over HTTP).
The device will respond to a non-WS request with a simple page that loads
websocket_content.js from a static host (http or https). However, even
if the resources are https, the page is still http and therefore allows
requesting to a WS (not WSS) websocket on the device.

Removed unused client_handshake from websocket_helper, and then merges the
remainder of this file (server_handshake) into webrepl.py (to reduce
firmware size). Also added the respond-as-HTTP handling to
server_handshake.

The default HTTP response is a simple page that sets the base URL and then
loads webrepl_content.js which document.write's the actual HTML.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-23 12:43:08 +10:00
Damien George e05d0a6335 extmod/modbluetooth: Add support for running sync irq on system thread.
If the Bluetooth stack runs on another OS thread then synchronous BLE irq
callbacks, which block the Bluetooth stack until the callback to Python is
complete, must coordinate with the main thread and configure the
MicroPython thread-local-state.

This commit adds MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS_WITH_INTERLOCK which
can be enabled if the system has these requirements.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-22 17:38:15 +10:00
Jim Mussared a053827084 extmod/network_ninaw10: Move ninaw10 root pointer registrations here.
Originally in drivers/ninaw10/nina_wifi_bsp.c but that isn't a QSTR source.

Also remove outdated commment about root pointers in mpconfigport.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-21 16:21:50 +10:00
Damien George bdad63eda2 extmod/btstack: Fix descriptor discovery handle range and events.
This fixes two problems with the BTstack implementation of descriptor
discovery:

- The call to gatt_client_discover_characteristic_descriptors needs to have
  value_handle set to the starting handle (actually characteristic handle)
  to start the search from.

- The BTstack event for a descriptor query result is
  GATT_EVENT_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY_RESULT.

With this change the test tests/multi_bluetooth/ble_subscribe.py now passes
when BTstack is instance1 (for BTstack to pass as instance0 requires
gatts_write to support sending an update on BTstack).

Signed-off-by: Damien George <damien@micropython.org>
2022-07-20 17:01:37 +10:00
Carlosgg b41cfea02a extmod/modussl_mbedtls: Implement cert_reqs and cadata arguments.
Add cert_reqs and cadata keyword-args to ssl.wrap_socket() and
ssl.CERT_NONE, ssl.CERT_OPTIONAL, ssl.CERT_REQUIRED constants to allow
certificate validation.

CPython doesn't accept cadata in ssl.wrap_socket(), but it does in
SSLContext.load_verify_locations(), so we use this name to at least match
the same name in load_verify_locations().

Add docs for these new arguments, as well as docs for the existing
server_hostname argument which is important for certificate validation.

Tests are added as well.

Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
2022-07-20 16:46:04 +10:00
Damien George b89422ceaa extmod: Always use custom mbedtls error message code.
All ports that use mbedtls use the custom error messages in
mp_mbedtls_errors.c.  This commit simplifies the build so that ports don't
need to explicitly add this file, it's now used by default when mbedtls is
enabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-07-18 22:55:22 +10:00
David Lechner 2c728c5330 extmod/modbluetooth: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register `bluetooth`
instead of using a conditional inside of mp_state_vm_t.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:52:01 +10:00
David Lechner 32e32bd761 extmod/vfs: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register vfs_cur and
vfs_mount_table instead of using a conditional inside of mp_state_vm_t.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:52:01 +10:00
David Lechner d532c55e3b extmod/modlwip: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register lwip_slip_stream
instead of using a conditional inside of mp_state_vm_t.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:52:01 +10:00
David Lechner 631b692177 extmod/uos_dupterm: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register dupterm_objs
instead of using a conditional inside of mp_state_vm_t.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:52:01 +10:00
David Lechner a3703584fe extmod/modnetwork: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register mod_network_nic_list and
removes the same from all mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:25 +10:00
David Lechner e531b72b56 extmod/nimble: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register bluetooth_nimble_memory
and bluetooth_nimble_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:50:14 +10:00
David Lechner 8fa6191f95 extmod/btstack: Use MP_REGISTER_ROOT_POINTER().
This uses MP_REGISTER_ROOT_POINTER() to register
bluetooth_btstack_root_pointers and removes the same from all
mpconfigport.h.

Signed-off-by: David Lechner <david@pybricks.com>
2022-07-18 13:49:51 +10:00
Damien George d660a0c3d1 extmod/network_cyw43: Add "security" config option to get/set auth mode.
Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 11:05:13 +10:00
Damien George 4f30c60dcb extmod/modnetwork: Include cyw43-driver header if it's enabled.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 16:03:21 +10:00
Damien George 7dd818052e extmod/network_cyw43: Support new cyw43-driver.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 14:10:58 +10:00
Damien George f75e611054 extmod/vfs: Prevent uninitialized variable warning for path_out.
The warning can appear when building in Release mode on the rp2 port.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-30 13:54:50 +10:00
Damien George db7682e02d extmod/uasyncio: Implement stream read(-1) to read all data up to EOF.
Fixes issue #6355.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-24 17:04:57 +10:00
Thorsten von Eicken c21452a1d2 extmod/uasyncio: Attempt to write immediately in Stream.write method.
The main aim of this change is to reduce the number of heap allocations
when writing data to a stream.  This is done in two ways:

1. Eliminate appending of data when .write() is called multiple times
   before calling .drain().  With this commit, the data is written out
   immediately if the underlying stream is not blocked, so there is no
   accumulation of the data in a temporary buffer.

2. Eliminate copying of non-bytes objects passed to .write().  Prior to
   this commit, passing a bytearray or memoryview to .write() would always
   result in a copy of it being made and turned into a bytes object.  That
   won't happen now if the underlying stream is not blocked.

Also, this change makes .write () more closely implement the CPython
documented semantics: "The method attempts to write the data to the
underlying socket immediately.  If that fails, the data is queued in an
internal write buffer until it can be sent."
2022-06-24 17:00:24 +10:00
Damien George 627ba38154 py/parsenum: Optimise when building with complex disabled.
To reduce code size when MICROPY_PY_BUILTINS_COMPLEX is disabled.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-23 11:46:47 +10:00
David Lechner a565811f23 extmod/modbtree: Use buffer protocol for keys/values.
This changes the btree implementation to use the buffer protocol for
reading key/values in all methods.  `str` and `bytes` objects are not the
only bytes-like objects that could be used.

Documentation and tests are also updated.

Addresses issue #8748.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:44:49 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George 4802b6d3af extmod/extmod.cmake: Only include modbtree in build if it's enabled.
Following how it's done in extmod.mk.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
Damien George f5769698e5 extmod/modlwip: Clean up inclusion of modlwip in build process.
The following changes are made:

- Guard entire file with MICROPY_PY_LWIP, so it can be included in the
  build while still being disabled (for consistency with other extmod
  modules).

- Add modlwip.c to list of all extmod source in py/py.mk and
  extmod/extmod.cmake so all ports can easily use it.

- Move generic modlwip GIT_SUBMODULES build configuration code from
  ports/rp2/CMakeLists.txt to extmod/extmod.cmake, so it can be reused by
  other ports.

- Remove now unnecessary inclusion of modlwip.c in EXTMOD_SRC_C in esp8266
  port, and in SRC_QSTR in mimxrt port.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
iabdalkader efa73ca833 extmod/network_ninaw10: Rename WLAN connect argument from essid to ssid.
Addresses issue #8083.
2022-06-17 21:43:44 +10:00
iabdalkader c502cf73e0 extmod/network_cyw43: Rename WLAN keyword args to ssid/security/key.
Rename WLAN keyword args to scan(), connect() and config() to be more
consistent across ports and WLAN drivers.  This change is backwards
compatible and will support obsolete keyword args, except for positional
"essid" which is now deprecated in favor of "ssid".

The changed argument names are
- "essid" changed to "ssid"
- "auth" or "authmode" changed to "security"
- "password" changed to "key"

Addresses issue #8083.
2022-06-17 21:43:25 +10:00
Damien George 5233fb3a3d extmod/machine_i2c: Only use WRITE1 option if transfer supports it.
When MICROPY_PY_MACHINE_I2C_TRANSFER_WRITE1 is enabled the port's hardware
I2C transfer functions should support the MP_MACHINE_I2C_FLAG_WRITE1
option, but software I2C will not.  So add a flag to the I2C protocol
struct so each individual protocol can indicate whether it supports this
option or not.

Fixes issue #8765.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-17 11:57:57 +10:00
iabdalkader 58b35c9abd extmod/extmod.cmake: Fix hard-coded mbedtls config file path.
* The mbedtls config file path is hard-coded to the config file in
the stm32 port. Any port using this cmake fragment is not actually
using its own config file.
2022-06-11 21:00:13 +10:00
iabdalkader a4eef90b22 extmod/modusocket: Fix polling of closed sockets.
Unbound sockets in NEW state should return HUP|WR when polled, and return
NVAL when in CLOSED state.
2022-06-08 14:15:01 +10:00
iabdalkader 70bf6ab6fb extmod/modusocket: Add socket state to track new/listening/conn/closed. 2022-06-08 14:13:59 +10:00
Damien George bd375df02c extmod/extmod.cmake: Require components to be explicitly enabled.
Otherwise include directories are added unconditionally to the build
variables if the component (submodule) is checked out.  This can lead to,
eg, the esp32 build using lib/lwip header files, instead of lwip header
files from the IDF.

Fixes issue #8727.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-08 13:03:34 +10:00
Damien George e8e8c7c354 extmod/modurandom: Fix missing void in empty argument list.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 23:41:49 +10:00
Damien George 9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Andrew Leech 4188bbd3d3 extmod/modussl_mbedtls: Poll EVENT_POLL_HOOK in ssl handshake loop.
Otherwise this is essentially an infinite loop on ports that do not use
interrupts to service network interfaces.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:29 +10:00
Andrew Leech 15fea3a1ff rp2: Integrate lwIP network stack.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:34:18 +10:00
Andrew Leech 21b3a396de extmod/network_wiznet5k: Add Wiznet Ethernet network interface.
Originally based on both stm32/network_wiznet5k and stm32/modnwwiznet5k.

If MICROPY_PY_LWIP is enabled it uses the lwIP TCP stack in MicroPython,
communicating with the Wiznet controller in MACRAW mode.  In this mode it
supports using the INTN pin from Wiznet controller to receive data from an
interrupt trigger.

If lwIP is not enabled, it runs in modnetwork/socket mode providing an
interface to the TCP stack running on the Wiznet controller chip.  In this
mode it includes some updates by @irinakim12 from #8021, most notably
bringing in DHCP support.

Supports defining hardware pins in board config or dynamically set at
runtime.  Sets a default MAC address in the random namespace from board
unique-id.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech 91fb9e7888 extmod/nimble: Add support for reading whole HCI UART packets.
This can improve efficiency for Bluetooth systems that already process
whole packets at the lower layers.
2022-06-03 11:53:28 +10:00
Damien George a1afb337d2 extmod/uasyncio: Fix edge case for cancellation of wait_for.
This fixes the cases where the task being waited on finishes just before or
just after the wait_for itself is cancelled.

Fixes issue #8717.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 17:14:20 +10:00
Damien George efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George 4a1ae99ac3 extmod/machine_i2c: Add optional support for write-then-read transfers.
This option is useful for ports where it's more efficient to do a full I2C
transfer in one go.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-01 13:20:27 +10:00
iabdalkader 0bdfceacbe extmod/network_ninaw10: Add support for socket events callback. 2022-05-26 11:15:07 +10:00
iabdalkader be83bdf9ec drivers/ninaw10: Update driver to support firmware 1.5.0.
* Firmware 1.5.0 introduces a new BSD-like sockets ABI,
which improves the integration with MicroPython.
2022-05-25 16:05:50 +02:00
Damien George 5956466c0e py/builtin: Clean up and simplify import_stat and builtin_open config.
The following changes are made:

- If MICROPY_VFS is enabled then mp_vfs_import_stat and mp_vfs_open are
  automatically used for mp_import_stat and mp_builtin_open respectively.

- If MICROPY_PY_IO is enabled then "open" is automatically included in the
  set of builtins, and points to mp_builtin_open_obj.

This helps to clean up and simplify the most common port configuration.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
iabdalkader edf41d2bf8 extmod/modusocket: Add sendall function. 2022-05-25 00:19:41 +10:00
iabdalkader b9d2f1e844 extmod/modusocket: Add timeout and callback to socket object. 2022-05-25 00:19:41 +10:00
iabdalkader 6841fecbb2 extmod/modusocket: Fix socket_make_new argument parsing. 2022-05-25 00:19:40 +10:00
iabdalkader 3438e80060 extmod/modusocket: Add support for socket events callback.
Add support for the special sockopt 20.
2022-05-25 00:18:33 +10:00
iabdalkader fc1f876175 extmod/modusocket: Add socket type print function. 2022-05-25 00:18:28 +10:00
iabdalkader eb957b0c95 extmod/modusocket: Fix errcode returned from socket read/write.
Drivers should ensure a positive errcode is returned from read/write.
2022-05-25 00:18:18 +10:00
iabdalkader 6136c7644a extmod/modusocket: Bind unconnected socket to default NIC in setsockopt.
Bind socket to default NIC if setsockopt is called before the socket is
bound, to allow setting SO_REUSEADDR before calling socket_bind().

Fixes issue #8653.
2022-05-25 00:16:32 +10:00
iabdalkader 7b4147dd0b extmod/modusocket: Fix polling of a new socket.
New sockets should return HUP and WR when polled, following modlwip.
2022-05-25 00:12:42 +10:00
iabdalkader 6b6ceafe1a extmod/webrepl: Fix setting password in foreground mode and factor code.
The password was not being set when running in foreground mode.  Duplicate
code has been removed.
2022-05-24 13:12:40 +10:00
Jim Mussared 75efb3267c extmod: Revert accidental usocket->socket rename.
The registration of the usocket module was accidentally changed to socket
in moving to MP_REGISTER_MODULE in bb794f05b7
2022-05-24 00:43:44 +10:00
Jim Mussared bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared 4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Damien George b0a1b60a9b extmod: Move font_petme128_8x8.h from ports/stm32 to extmod.
And add spaces after commas so it is consistently formatted.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 13:30:40 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Damien George caaff940a2 extmod/uasyncio: Rename and merge TaskQueue push/pop methods.
These are internal names and can be safely renamed without affecting user
code.  push_sorted() and push_head() are merged into a single push()
method, which is already how the C version is implemented.  pop_head() is
simply renamed to pop().

The changes are:
- q.push_sorted(task, t) -> q.push(task, t)
- q.push_head(task) -> q.push(task)
- q.pop_head() -> q.pop()

The shorter names and removal of push_head() leads to a code size reduction
of between 40 and 64 bytes on bare-metal targets.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-22 16:37:02 +10:00
Damien George 28e7e15c0a extmod/uasyncio: Fix bug with task ending just after gather is cancel'd.
This fixes a bug where the gather is cancelled externally and then one of
its sub-tasks (that the gather was waiting on) finishes right between the
cancellation being queued and being executed.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-21 14:25:17 +10:00
Damien George f7454f850f extmod/uasyncio: Make Python Task match C version with use of asserts.
This helps to catch bugs when a Task is put on more than one pairing heap.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-21 14:25:17 +10:00
Damien George aab005c75b extmod/modusocket: Provide config macro for socket.listen backlog deflt.
To make it possible to change this value for any given port or board.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:28:56 +10:00
Jon Bjarni Bjarnason 919f696ad2 extmod/modusocket: Implement optional socket.listen backlog argument.
This follows the CPython change: https://bugs.python.org/issue21455

Socket listen backlog defaults to 2 if not given, based on most bare metal
targets not having many resources for a large backlog.  On UNIX it defaults
to SOMAXCONN or 128, whichever is less.
2022-04-11 15:26:47 +10:00
Damien George 11ab90391d extmod/extmod.cmake: Add micropy_lib_mbedtls component.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-04 23:15:01 +10:00
Damien George 90aaf2dbef extmod/uasyncio: Fix gather cancelling and handling of exceptions.
The following fixes are made:
- cancelling a gather now cancels all sub-tasks of the gather (previously
  it would only cancel the first)
- if any sub-task of a gather raises an exception then the gather finishes
  (previously it would only finish if the first sub-task raised)

Fixes issues #5798, #7807, #7901.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-30 16:07:44 +11:00
Damien George 335002a4c0 extmod/uasyncio: Allow task state to be a callable.
This implements a form of CPython's "add_done_callback()", but at this
stage it is a hidden feature and only intended to be used internally.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-30 16:07:44 +11:00
Damien George 63f0e700f4 extmod/modure: Set subject begin_line so ^ doesn't match interior.
Fixes issue #8402.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-16 12:21:00 +11:00
Damien George 0149cd6b8b windows: Switch to VFS subsystem and use VfsPosix.
Following the unix port.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-10 00:26:36 +11:00
Damien George 2b409ef8a4 unix/moduos: Convert module to use extmod version.
All variants now use extmod/moduos.c as their uos module implementation.
In particular this means they all have MICROPY_VFS enabled and use VfsPosix
for their filesystem.

As part of this, the available functions in uos become more consistent with
other ports:
- coverage variant gets uos.urandom
- minimal and standard variant get: unlink, chdir, getcwd, listdir

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 21:13:57 +11:00
Damien George ade2720e55 esp8266/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 11b77263ef stm32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 818be10bb5 zephyr/moduos: Convert module to use extmod version.
This also adds uos.unlink(), for all ports that use extmod/moduos.c.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 1c53d85162 esp32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 926b554daf extmod/moduos: Create general uos module to be used by all ports.
Based on the rp2 port version, with the rp2 port converted to use this
module.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Daniël van de Giessen e2513bfe8d extmod/moduzlib: Fix parsing zlib header dict size.
From RFC 1950 section 2.2: "CINFO is the base-2 logarithm of the LZ77
window size, minus eight (CINFO=7 indicates a 32K window size)"

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2022-03-08 23:16:14 +11:00
stijn 49934fcf8b extmod/moduplatform: Move platform PP definitions into a header.
These are more generally useful than just for the module so make them
globally available, prefixed consistently with MICROPY_PLATFORM_.
2022-02-22 00:59:14 +11:00
iabdalkader 465b74e78d drivers/ninaw10: Add NIC-level ioctl function.
This commit adds support in the driver for irregular commands.  It
currently supports setting GPIO pin mode, and GPIO pin read/write value.
2022-02-18 14:35:26 +11:00
Christian Decker 2e3a2785cd extmod/modubinascii: Add newline keyword to b2a_base64 function.
This allows encoding things (eg a Basic-Auth header for a request) without
slicing the \n from the string, which allocates additional memory.

Co-authored-by: David Lechner <david@lechnology.com>
2022-01-23 10:18:01 +11:00
Damien George 7d71ae25ed extmod/machine_i2c: Increase default SoftI2C timeout to 50ms.
Some devices, eg BNO055, can stretch SCL for a long time, so make the
default large to accommodate them.  50ms matches the current default for
stm32 hardware I2C .

Signed-off-by: Damien George <damien@micropython.org>
2022-01-21 15:10:30 +11:00
Damien George 9438fb7321 extmod/modusocket: Support additional args to getaddrinfo.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-21 13:40:06 +11:00
iabdalkader 1aac151d68 drivers/ninaw10: Return standard error numbers. 2022-01-21 13:35:05 +11:00
iabdalkader a63875d5ad extmod/modusocket: Create new sockets in blocking mode.
To conform with CPython and other MicroPython ports.
2022-01-21 13:34:56 +11:00
iabdalkader 155eb1361e extmod/modusocket: Add makefile() method and common socket options. 2022-01-21 13:34:06 +11:00
iabdalkader b23178a9c0 extmod/modusocket: Make setsockopt return if NIC is not connected. 2022-01-21 13:32:09 +11:00
iabdalkader e401ff8935 drivers/ninaw10: Fix timeout handling to match modusocket. 2022-01-21 13:31:41 +11:00
iabdalkader 9a61bc3aa7 extmod/network_ninaw10: Implement MP_STREAM_POLL in ioctl.
There is currently no function to query if the socket is writable.
2022-01-21 13:30:48 +11:00
Damien George e7fff736b5 extmod/modbluetooth: Put declaration of connect_cancel in correct place.
This fixes a bug introduced in 851ecb2da1

Signed-off-by: Damien George <damien@micropython.org>
2022-01-13 13:45:43 +11:00
Damien George 889dee8076 extmod/modbluetooth: Fix conditional compilation of ringbuf_put_uuid.
This fixes a bug introduced in a76604afba

Signed-off-by: Damien George <damien@micropython.org>
2022-01-13 13:45:07 +11:00
iabdalkader f2ccf87e0b extmod/network_ninaw10: Use socket timeout preset in modusocket. 2022-01-12 14:37:40 +11:00
iabdalkader 842da93011 extmod/modusocket: Initialise accepted socket state. 2022-01-12 14:37:32 +11:00
iabdalkader 67420de4f4 extmod/modusocket: Allow setting timeout on unbound sockets.
For an extended state socket, if settimeout() is called before a NIC is
bound, save the timeout until the NIC is bound.
2022-01-12 14:36:55 +11:00
Damien George 3243abfda2 extmod/moduplatform: Detect xtensa arch.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-06 18:24:52 +11:00
iabdalkader 5a86031223 extmod/network_ninaw10: Make recv/recvfrom interchangeable. 2022-01-06 14:36:57 +11:00
iabdalkader 73a6b53dbe extmod/network_ninaw10: Return -1 on timeout from recv/send. 2022-01-06 14:36:55 +11:00
iabdalkader 544c232eb7 extmod/network_ninaw10: Make NIC state persistent. 2022-01-06 14:36:51 +11:00
iabdalkader 0f25e0387c extmod/network_ninaw10: Disable active connections before connecting. 2022-01-06 14:36:44 +11:00
iabdalkader 1b7eee24eb extmod/network_ninaw10: Fix config of AP mode.
* Fix missing call to connect to configure module in AP mode.
* Use enum for config/connect args indices.
2021-12-14 15:14:58 +11:00