Commit Graph

26 Commits

Author SHA1 Message Date
Andrew Leech a80a146858 extmod/bluetooth: Support active scanning in BLE.gap_scan().
This adds an additional optional parameter to gap_scan() to select active
scanning, where scan responses are returned as well as normal scan results.
This parameter is False by default which retains the existing behaviour.
2020-08-26 15:00:11 +10:00
Jim Mussared 3d9a7ed02f extmod/btstack: Implement GAP scan duration_ms parameter.
This commit makes scanning work when duration_ms is set to zero.  Prior to
this it would not work with duration_ms set to zero.
2020-08-26 14:55:52 +10:00
Jim Mussared 9d823a5d9a extmod/modbluetooth: Add event for "indicate acknowledgement".
This commit adds the IRQ_GATTS_INDICATE_DONE BLE event which will be raised
with the status of gatts_indicate (unlike notify, indications require
acknowledgement).

An example of its use is added to ble_temperature.py, and to the multitests
in ble_characteristic.py.

Implemented for btstack and nimble bindings, tested in both directions
between unix/btstack and pybd/nimble.
2020-07-20 23:26:41 +10:00
Jim Mussared 3c7ca2004c extmod/modbluetooth: Fix so it builds in peripheral-only mode. 2020-07-20 23:25:56 +10:00
Jim Mussared b7698841b2 docs/library: Add gatts_indicate() doc to ubluetooth.rst.
Also clarify behavior of `gatts_notify` and add some TODOs about adding an
event for indication acknowledgement.
2020-07-18 14:34:44 +10:00
Jim Mussared e152d0c197 extmod/btstack: Schedule notify/indicate/write ops for bg completion.
The goal of this commit is to allow using ble.gatts_notify() at any time,
even if the stack is not ready to send the notification right now.  It also
addresses the same issue for ble.gatts_indicate() and ble.gattc_write()
(without response).  In addition this commit fixes the case where the
buffer passed to write-with-response wasn't copied, meaning it could be
modified by the caller, affecting the in-progress write.

The changes are:

- gatts_notify/indicate will now run in the background if the ACL buffer is
  currently full, meaning that notify/indicate can be called at any time.

- gattc_write(mode=0) (no response) will now allow for one outstanding
  write.

- gattc_write(mode=1) (with response) will now copy the buffer so that it
  can't be modified by the caller while the write is in progress.

All four paths also now track the buffer while the operation is in
progress, which prevents the GC free'ing the buffer while it's still
needed.
2020-07-18 14:23:47 +10:00
Damien George 026fda605e tools/codeformat.py: Include extmod/{btstack,nimble} in code formatting.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-18 22:20:20 +10:00
Jim Mussared c07ea3e4c2 extmod/modbluetooth: Implement read done event.
On btstack there's no status associated with the read result, it comes
through as a separate event.  This allows you to detect read failures or
timeouts.
2020-06-05 14:08:15 +10:00
Jim Mussared 919d640aec extmod/modbluetooth: Allow discovery of svc/char by uuid.
In most situations this is a more efficient way of going straight to the
service and characteristic you need.
2020-06-05 14:08:07 +10:00
Jim Mussared 6a3c89d584 extmod/modbluetooth: Add discover complete events for svc/char/desc.
Without this it's difficult to implement a state machine correctly if the
desired services are not found.
2020-06-05 14:07:52 +10:00
Damien George 3b6c9119eb extmod/modbluetooth: Add support for changing the GAP device name.
This commit allows the user to set/get the GAP device name used by service
0x1800, characteristic 0x2a00.  The usage is:

    BLE.config(gap_name="myname")
    print(BLE.config("gap_name"))

As part of this change the compile-time setting
MICROPY_PY_BLUETOOTH_DEFAULT_NAME is renamed to
MICROPY_PY_BLUETOOTH_DEFAULT_GAP_NAME to emphasise its link to GAP and this
new "gap_name" config value.  And the default value of this for the NimBLE
bindings is changed from "PYBD" to "MPY NIMBLE" to be more generic.
2020-05-11 21:30:41 +10:00
Jim Mussared 2e3c42775a unix: Add btstack to the unix submodules list.
But only when bluetooth is enabled, i.e. if building the dev or coverage
variants, and we have libusb available.

Update travis to match, i.e. specify the variant when doing
`make submodules`.
2020-04-29 16:54:12 +10:00
Jim Mussared ebfd9ff2e6 extmod/modbluetooth: Fix sign compare and unused variable warnings. 2020-04-29 16:54:12 +10:00
Jim Mussared 7563d58210 unix: Add support for modbluetooth and BLE using btstack.
This commit adds full support to the unix port for Bluetooth using the
common extmod/modbluetooth Python bindings.  This uses the libusb HCI
transport, which supports many common USB BT adaptors.
2020-04-29 16:45:46 +10:00
Jim Mussared c987adb9e9 extmod/btstack: Implement more robust init/deinit sequencing. 2020-04-29 16:45:46 +10:00
Jim Mussared 8119ec0765 extmod/modbluetooth: Don't hold atomic section during mp_sched_schedule.
Because, for example, on unix the atomic section isn't re-entrant, and
mp_sched_schedule() will try to re-acquire the atomic section.
2020-04-29 16:45:40 +10:00
Jim Mussared 0da47ecc93 stm32/Makefile: Rename SRC_LIB to LIB_SRC_C to match other ports. 2020-04-29 16:38:18 +10:00
Damien George 899e89d4c6 extmod/btstack: Pass through SCAN_RSP events.
The latest version of BTstack has a bug fixed so that it correctly
configures scan parameters if they are set right after activating the
stack.  This means that BLE.gap_scan() will correctly set the scanning to
passive and so SCAN_RSP events are not passed through, so we don't need to
explicitly filter them in our bindings.
2020-04-07 13:46:56 +10:00
Damien George dd0bc26e65 extmod/modbluetooth: Change scan result's "connectable" to "adv_type".
This commit changes the BLE _IRQ_SCAN_RESULT data from:

    addr_type, addr, connectable, rssi, adv_data

to:

    addr_type, addr, adv_type, rssi, adv_data

This allows _IRQ_SCAN_RESULT to handle all scan result types (not just
connectable and non-connectable passive scans), and to distinguish between
them using adv_type which is an integer taking values 0x00-0x04 per the BT
specification.

This is a breaking change to the API, albeit a very minor one: the existing
connectable value was a boolean and True now becomes 0x00, False becomes
0x02.

Documentation is updated and a test added.

Fixes #5738.
2020-03-11 14:00:44 +11:00
Jim Mussared 1937fb22ab extmod/nimble: Clarify active state and check for active in all methods.
This commit ensures that the BLE stack is active before allowing operations
that may otherwise crash if it's not active.  It also clarifies the state
better (adding the "stopping" state) and renames mp_bluetooth_is_enabled to
the more self-explanatory mp_bluetooth_is_active.
2020-03-11 13:01:35 +11:00
Damien George d7259f6b1c extmod/btstack: Implement notifications/indications for GATT clients.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 018ce122ca extmod/btstack: Implement scan and gatt client, connect and disconnect.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 372e5a280e extmod/btstack: Implement gatts_db for btstack.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 86c26db3ff extmod/btstack: Implement service registration.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 0674917bc5 extmod/btstack: Implement advertising.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George fbefcef1df extmod/btstack: Add empty modbluetooth implementation.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00