Commit Graph

3408 Commits

Author SHA1 Message Date
David Lechner 6a4a9bc147 windows/Makefile: Allow variants to add QSTR_DEFS.
This modifies the windows port Makefile to use += for QSTR_DEFS and
QSTR_GLOBAL_DEPENDENCIES so that variants can add additional files if
needed (similar to stm32 port).

Signed-off-by: David Lechner <david@pybricks.com>
2023-05-11 14:34:15 +10:00
David Lechner 6836acf3dc unix/Makefile: Allow variants to add QSTR_DEFS.
This modifies the unix port Makefile to use += for QSTR_DEFS and
QSTR_GLOBAL_DEPENDENCIES so that variants can add additional files if
needed (similar to stm32 port).

Signed-off-by: David Lechner <david@pybricks.com>
2023-05-11 14:34:01 +10:00
robert-hh 65d376b11d mimxrt/machine_pin: Perform full configuration in machine_pin_set_mode.
machine_pin_set_mode() is used by the internal mp_hal_pin_xxx() set of
functions to configure pins.
2023-05-09 16:15:05 +10:00
robert-hh 14b862f70f mimxrt/machine_spi: Ignore transfers with len=0.
It was treated as an error before.  The error surfaced when using the
NINAW10 drivers for WiFi support.  Even if this is a bad behavior of the
NINA driver, machine_spi can be forgiving in that situation.
2023-05-09 16:14:40 +10:00
robert-hh d2a02dcee3 mimxrt: Add missing UART defintion and remove obsolete config.
Changes in this commit:
- Add a missing UART defintion for MIMXRT1010_EVK.
- Remove an obsolete line from mpconfigport.h.
2023-05-09 16:13:51 +10:00
robert-hh facc51f3ea mimxrt/mpconfigport: Add back lost uos.urandom().
It got lost in a clean-up session recently.
2023-05-09 16:13:27 +10:00
Philipp Ebensberger a3f3b9045c mimxrt/flash: Separate low level driver code from flash object.
Separate low level flash access from mimxrt flash driver object.  Allows
better abstraction from hardware for testing and reuse in other areas (e.g.
bootloader).

Signed-off-by: Philipp Ebensberger <philipp.ebensberger@3bricks-software.de>
2023-05-09 15:18:36 +10:00
Jim Lipsey 7333c06d05 stm32/boards/ARDUINO_PORTENTA_H7: Enable FDCAN.
Add pin definitions to enable FDCAN support using the pyb.CAN() class.
2023-05-09 13:25:03 +10:00
glenn20 1093dea709 esp32,esp8266: Add support to set/get power saving mode of WLAN.
For esp32 and esp8266 this commit adds:
- a 'pm' option to WLAN.config() to set/get the wifi power saving mode; and
- PM_NONE, PM_PERFORMANCE and PM_POWERSAVE constants to the WLAN class.

This API should be general enough to use with all WLAN drivers.

Documentation is also added.
2023-05-06 13:51:00 +10:00
Damien George 38243cd8e0 extmod/machine_pwm: Remove PWM_INIT and PWM_DUTY_U16_NS config options.
All ports that enable MICROPY_PY_MACHINE_PWM now enable these two
sub-options, so remove these sub-options altogether to force consistency in
new ports that implement machine.PWM.

Signed-off-by: Damien George <damien@micropython.org>
2023-05-04 13:19:19 +10:00
robert-hh 7952694a3c rp2/machine_pwm: Add duty_x() checks and return 0 if PWM is not started.
Changes in this commit:
- Limit duty_u16() to 65535 and duty_ns() to the period duration.
- Return 0 for pwm.freq() if the frequency has not been set yet.
- Return 0 for pwm.duty_us16() and duty_ns() unless both frequency and
  duty cycle have been set.
- Initialize the pin to PWM at the very end of the constructor, to avoid
  possible glitches on the pin when setting up the PWM.
2023-05-04 13:18:58 +10:00
robert-hh 0b3b508d1d rp2/machine_pwm: Add support for inverting a PWM channel output.
Using the invert=True|False keyword option with the constructor or init().
2023-05-04 13:18:47 +10:00
robert-hh 2ac643c15b esp8266/machine_pwm: Implement duty_u16() and duty_ns() for consistency.
Also adds these keyword arguments to the constructor and init method.
2023-05-04 13:17:55 +10:00
robert-hh 84302b2854 rp2/machine_pwm: Enable keyword args in constructor and add init method.
This adds support for freq/duty_u16/duty_ns keyword arguments in the PWM
constructor, and adds the PWM.init() method.  Using init() without
arguments enables a previously deinit-ed PWM again.

Further changes in this commit:
- Do not start PWM output if only duty was set.
- Stop all PWM slices on soft-reset.
- Fix a bug when changing the freq on a channel pair with duty_ns set.
2023-05-04 13:13:05 +10:00
robert-hh 250757716a samd/machine_pwm: Add init() method to PWM and simplify the PWM code.
The PWM.init() method has been added.  Calling init() without arguments
restarts a PWM channel stopped with deinit().  Otherwise single parameters
except for "device=n" can be changed again.  The device can only be
specified once, either in the constructor or the first init() call.

Also simplify get_pwm_config() and get_adc_config(), and shrink the PWM
object.
2023-05-04 13:10:38 +10:00
robert-hh 9c7ad68165 mimxrt/machine_pwm: Start PWM only if freq and duty are set.
And also fix/improve the following:
- Simplify the duty handling a little bit.
- Allow duty_u16(65536), which sets the output high.
- Rename machine_pwm_start() to mp_machine_pwm_start(), in preparation for
  a possible start/stop method pair.
2023-05-04 13:09:39 +10:00
Christian Clauss 2a1db770ce all: Fix cases of Python variable assigned but never used.
This fixes ruff rule F841.
2023-05-02 16:36:05 +10:00
Christian Clauss 79e57473b2 all: Fix various Python coding inconsistencies found by ruff.
This fixes:
- type-comparison (E721): do not compare types, use isinstance().
- string-dot-format-missing-arguments (F524): .format call is missing
  argument(s) for placeholder(s): {message}.
- f-string-missing-placeholders (F541).
- is-literal (F632): Use != to compare constant literals.

The last one is fixed by just comparing for truthfulness of `state`.
2023-05-02 16:14:45 +10:00
Christian Clauss 8f8bd98164 all: Fix strings with backslash by using raw string literals. 2023-05-02 11:55:02 +10:00
Glenn Moloney 7fa322afb8 esp32,esp8266: Add support for the Espressif ESP-NOW protocol.
ESP-NOW is a proprietary wireless communication protocol which supports
connectionless communication between ESP32 and ESP8266 devices, using
vendor specific WiFi frames.  This commit adds support for this protocol
through a new `espnow` module.

This commit builds on original work done by @nickzoic, @shawwwn and with
contributions from @zoland.  Features include:
- Use of (extended) ring buffers in py/ringbuf.[ch] for robust IO.
- Signal strength (RSSI) monitoring.
- Core support in `_espnow` C module, extended by `espnow.py` module.
- Asyncio support via `aioespnow.py` module (separate to this commit).
- Docs provided at `docs/library/espnow.rst`.

Methods available in espnow.ESPNow class are:
- active(True/False)
- config(): set rx buffer size, read timeout and tx rate
- recv()/irecv()/recvinto() to read incoming messages from peers
- send() to send messages to peer devices
- any() to test if a message is ready to read
- irq() to set callback for received messages
- stats() returns transfer stats:
    (tx_pkts, tx_pkt_responses, tx_failures, rx_pkts, lost_rx_pkts)
- add_peer(mac, ...) registers a peer before sending messages
- get_peer(mac) returns peer info: (mac, lmk, channel, ifidx, encrypt)
- mod_peer(mac, ...) changes peer info parameters
- get_peers() returns all peer info tuples
- peers_table supports RSSI signal monitoring for received messages:
    {peer1: [rssi, time_ms], peer2: [rssi, time_ms], ...}

ESP8266 is a pared down version of the ESP32 ESPNow support due to code
size restrictions and differences in the low-level API.  See docs for
details.

Also included is a test suite in tests/multi_espnow.  This tests basic
espnow data transfer, multiple transfers, various message sizes, encrypted
messages (pmk and lmk), and asyncio support.

Initial work is from https://github.com/micropython/micropython/pull/4115.
Initial import of code is from:
https://github.com/nickzoic/micropython/tree/espnow-4115.
2023-05-01 16:47:21 +10:00
Carlosgg b5f4611969 lib/mbedtls_errors: Add esp32-specific mbedtls error file.
This allows updating mp_mbedtls_errors.c for the other mbedtls based ports
based on mbedTLS v2.28.1.  This esp32-specific file will not be required
after updating IDF support to >= v4.4.1.

Signed-off-by: Carlos Gil <carlosgilglez@gmail.com>
2023-05-01 10:50:01 +10:00
Damien George b1229efbd1 all: Fix spelling mistakes based on codespell check.
Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 18:03:06 +10:00
Damien George 143b863f54 zephyr/modutime: Use extmod version of time module.
API change: time.time_ns() is added, but it just returns 0.

No API or functional change to existing time functions.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:52 +10:00
Damien George fa8a81ae23 webassembly/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:52 +10:00
Damien George 127fd170c8 unix/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:52 +10:00
Damien George 996a1f911b stm32/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:52 +10:00
Damien George d7cb53cb60 samd/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George 67e917609f rp2/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George 322c53bbc9 renesas-ra/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George a3c427898e nrf/modules/utime: Use extmod version of time module.
API additions;
- time.sleep() is added
- time.ticks_cpu() is added, but it just returns 0

No API or functional change to existing time functions.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George c234a26954 mimxrt/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George 4a4046d825 esp8266/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George 5be20b67df esp32/modutime: Use extmod version of time module.
No API or functional change.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George 8ad2da93be cc3200/mods/modutime: Use extmod version of time module.
API change: time.time_ns() is added, but it just returns 0.

No API or functional change to existing time functions.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:11:51 +10:00
Damien George 9955553001 extmod/modutime: Provide a generic time module.
Based on extmod/utime_mphal.c, with:
- a globals dict added
- time.localtime wrapper added
- time.time wrapper added
- time.time_ns function added

New configuration options are added for this module:
- MICROPY_PY_UTIME (enabled at basic features level)
- MICROPY_PY_UTIME_GMTIME_LOCALTIME_MKTIME
- MICROPY_PY_UTIME_TIME_TIME_NS

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 15:09:56 +10:00
Damien George 083dc1f082 ports: Use extmod version of mktime instead of port-specific one.
Apart from slight differences in the error message, the functionality of
all ports is unchanged.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-27 14:55:07 +10:00
Takeo Takahashi dc7de6ed83 renesas-ra: Change MICROPY_HW_BOARD_NAME definition to product name.
Changes in this commit:
- Change MICROPY_HW_BOARD_NAME definition to match the product name.
- Rename board folder's name to match the product name style.
- Change related files like Makefile, document descriptions, test cases, CI
  and tools.

Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2023-04-27 14:12:53 +10:00
Damien George a14e79bcfb stm32/cyw43_configport: Provide cyw43_hal_pin_config_irq_falling func.
Signed-off-by: Damien George <damien@micropython.org>
2023-04-26 12:57:35 +10:00
Damien George fe4ac49d7f rp2/memmap_mp.ld: Allow a board to reserve memory for the C heap.
Since c80e7c14e6 changed the GC heap to use
all unused RAM, there is no longer any RAM available for the traditional C
heap (which is not used by default in MicroPython but may be used by C
extensions).  This commit adds a provision for a board to reserve RAM for
the C heap, by defining MICROPY_C_HEAP_SIZE.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-26 12:36:21 +10:00
IcedRooibos 7ea06a3e26 esp32/esp32_rmt: Fix looping behaviour for RMT on ESP32-S3.
The previous code worked on ESP32 but not ESP32-S3.  All the IDF (v4.4.3)
examples call rmt_set_tx_loop_mode before rmt_write_items, so make that
change here.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-26 12:32:13 +10:00
Jim Mussared a42a8022d8 extmod/modbluetooth: Make all HCI transports trace in the same format.
- Use HCI_TRACE macro consistently.
 - Use the same colour formatting.
 - Add a tool to convert to .pcap for Wireshark.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-04-26 11:37:20 +10:00
Jim Mussared 256f47e2f8 extmod/btstack: Fix indicate/notify queuing.
This adds a mechanism to track a pending notify/indicate operation that
is deferred due to the send buffer being full. This uses a tracked alloc
that is passed as the content arg to the callback.

This replaces the previous mechanism that did this via the global pending
op queue, shared with client read/write ops.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-04-26 11:37:20 +10:00
Jim Mussared bc9ec1cf71 extmod/modbluetooth: Merge gatts_notify/indicate implementation.
Makes gatts_notify and gatts_indicate work in the same way: by default they
send the DB value, but you can manually override the payload.

In other words, makes gatts_indicate work the same as gatts_notify.

Note: This removes support for queuing notifications and indications on
btstack when the ACL buffer is full. This functionality will be
reimplemented in a future commit.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-04-26 11:37:20 +10:00
Damien George 9e6885ad82 extmod/btstack: Switch to use hci_dump_init instead of hci_dump_open.
The latter is no longer available in the version of BTstack now in use by
this repository.

Signed-off-by: Damien George <damien@micropython.org>
2023-04-22 00:39:31 +10:00
David (Pololu) bf3eb9dc39 rp2/machine_i2c: Add timeout parameter for machine.I2C().
This commit adds support for the `timeout` keyword argument to machine.I2C
on the rp2 port, following how it's done on other ports.

The main motivation here is avoid the interpreter crashing due to infinite
loops when SDA is stuck low, which is quite common if the board gets reset
while reading from an I2C device.

A default timeout of 50ms is chosen because it's consistent with:
- Commit a707fe50b0 which used a timeout of
  50,000us for zero-length writes on the rp2 port.
- The machine.SoftI2C class which uses 50,000us as the default timeout.
- The stm32 port's hardware I2C, which uses 50,000us for
  I2C_POLL_DEFAULT_TIMEOUT_US.

This commit also fixes the default timeout on the esp32 port to be
consistent with the above, and updates the documentation for machine.I2C to
document this keyword argument.
2023-04-21 18:03:33 +10:00
iabdalkader 0acc73344a mimxrt: Fix the build for boards without ROM API. 2023-04-12 17:01:25 +02:00
iabdalkader bde222ce84 mimxrt/modmachine: Implement machine.bootloader().
If a board defines a custom bootloader entry function it will be called
first, if not and the ROM API supports RUN bootloader API, then
`machine.bootloader()` will jump to the ROM serial downloader in USB mode.
2023-04-11 17:40:18 +10:00
iabdalkader 8b72721b29 mimxrt/mpconfigport: Allow configuring different network interfaces.
This commit allows boards to disable Ethernet and keep the networking stack
enabled, to use an alternate networking interface, such as WiFi.

Note that the `network` and `socket` modules are now enabled by default for
a board.
2023-04-11 17:20:29 +10:00
iabdalkader 944b4c2058 mimxrt/boards/MIMXRT1064_EVK: Fix board config to use internal flash.
This commit is necessary to make MicroPython work on this eval kit out of
the box, as the eval kit ships with the HyperFlash physically disconnected
from the bus (refer to the schematics or the user guide) and the QSPI
connected instead, but the fuses/board/pins are configured to boot from
internal flash (on FlexSPI2).

Note that enabling the HyperFlash is not trivial, as it requires soldering
and desoldering of many small footprint resistors and changing fuses.
2023-04-11 17:04:21 +10:00
iabdalkader ed5e3598f1 mimxrt/Makefile: Fix internal flash configuration and build. 2023-04-11 17:03:28 +10:00