Commit Graph

225 Commits

Author SHA1 Message Date
Damien George 05bea70979 esp8266/etshal.h: Remove unneeded function declarations.
These removed ones are either unused by MicroPython or provided by osapi.h
in the SDK.  In particular ets_delay_us() has different signatures for
different versions of the SDK, so best to let it provide the declaration.

Fixes issue #8095.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-21 14:37:16 +11:00
Damien George de43b500bd py/runtime: Allow initialising sys.path/argv with defaults.
If MICROPY_PY_SYS_PATH_ARGV_DEFAULTS is enabled (which it is by default)
then sys.path and sys.argv will be initialised and populated with default
values.  This keeps all bare-metal ports aligned.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-18 00:08:07 +11:00
Jim Mussared 86ce442607 ports: Add '.frozen' as the first entry in sys.path.
Frozen modules will be searched preferentially, but gives the user the
ability to override this behavior.

This matches the previous behavior where "" was implicitly the frozen
search path, but the frozen list was checked before the filesystem.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-18 00:08:07 +11:00
Jim Mussared 92353c2911 all: Remove support for FROZEN_DIR and FROZEN_MPY_DIR.
These have been deprecated for over two years in favour of FROZEN_MANIFEST
and manifest.py.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-12-17 23:54:05 +11:00
Damien George 5adb1fa40e esp32,esp8266: Extract qstr from object when comparing keys in config().
Following on from a previous fix for the same problem made in
3a431fba50.

Fixes issue #8052.

Signed-off-by: Damien George <damien@micropython.org>
2021-12-14 14:27:13 +11:00
Damien George ff4f1f3ab3 esp8266/boards/GENERIC: Enable f-strings.
Costs 612 bytes of code space.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-05 14:05:54 +11:00
Mike Causer 7f14344428 ports: Add images, features and urls to board.json. 2021-10-28 15:25:38 +11:00
Jim Mussared e359b077dd ports: Add board.json for all boards.
This will be used by https://micropython.org/download/ to generate the
full listing of boards and firmware files.

Optionally supports a board.md for additional customisation of the
download page, as well as deploy.md for flashing instructions.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-10-27 14:04:53 +11:00
Damien George af64c2ddbd extmod/machine_pwm: Factor out machine.PWM bindings to common code.
This commit refactors machine.PWM and creates extmod/machine_pwm.c.  The
esp8266, esp32 and rp2 ports all use this and provide implementations of
the required PWM functionality.  This helps to reduce code duplication and
keep the same Python API across ports.

This commit does not make any functional changes.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-04 16:31:17 +10:00
Damien George d41f6dde56 extmod/modonewire: Make _onewire module configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George afe0634c98 extmod/machine_spi: Make SoftSPI configurable via macro option.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Damien George 122d901ef1 extmod/machine_i2c: Make SoftI2C configurable via macro option.
The zephyr port doesn't support SoftI2C so it's not enabled, and the legacy
I2C constructor check can be removed.

Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 13:11:23 +10:00
Jim Mussared 996f703166 esp32,esp8266: Remove dead code for end_ticks in machine_bitstream.
The compiler was optimising this out already so it's a no-op change.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-24 23:55:08 +10:00
Jim Mussared 62fd450e62 drivers/neopixel: Add common machine.bitstream-based neopixel module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Jim Mussared 39e9c0788f esp8266: Replace esp.neopixel with machine.bitstream.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Damien George 8616129f2e esp8266,esp32: Include hidden networks in WLAN.scan results.
Addresses issues #2697 and #5329.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 13:28:34 +10:00
Roberto Colistete Jr b099db4426 esp8266/Makefile: Add more libm files to build.
Allows MICROPY_PY_MATH_SPECIAL_FUNCTIONS to be enabled, and for ulab to be
built as a user C module.
2021-07-22 23:55:31 +10:00
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Damien George 132d93886f ports: Use common mp_hal_stdout_tx_strn_cooked instead of custom one.
To reduce code duplication.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-08 12:59:31 +10:00
Michael Weiss b3a34dde36 esp32,esp8266: Add __len__ to NeoPixel driver to support iterating.
Signed-off-by: mishafarms <github@mishafarms.us>
2021-06-22 16:33:55 +10:00
David Lechner ca920f7218 py/mpstate: Make exceptions thread-local.
This moves mp_pending_exception from mp_state_vm_t to mp_state_thread_t.
This allows exceptions to be scheduled on a specific thread.

Signed-off-by: David Lechner <david@pybricks.com>
2021-06-19 09:43:44 +10:00
Damien George eb7ae538f9 esp8266/boards/GENERIC_512K: Add custom minimal _boot.py.
Commit 0abf6f830c removed _boot.py from the
manifest for the GENERIC_512K board because the build does not include a
filesystem.  But the main code expects _boot.py to be there and prints an
error if it's not.  So add a custom _boot.py, which just sets the
gc.threshold().

Signed-off-by: Damien George <damien@micropython.org>
2021-06-18 14:13:18 +10:00
Damien George db8704ecbd esp8266,esp32: Update manifest to point to new dirs in micropython-lib.
Following a refactoring of micropython-lib.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-28 18:32:56 +10:00
Damien George 0abf6f830c esp8266/boards/GENERIC_512K: Add custom manifest without FS modules.
The 512k build does not have a filesystem so there is no reason to include
the filesystem-related modules.  This commit provides a custom manifest.py
for this board which no longer includes: _boot.py, flashbdev.py,
inisetup.py, upip.py, upip_utarfile.py.  This cuts the build down by about
9k of flash.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 21:41:40 +10:00
Damien George e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George 7cbf826a95 py/scheduler: Add mp_sched_exception() to schedule a pending exception.
This helper is added to properly set a pending exception, to mirror
mp_sched_schedule(), which schedules a function.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George a41cd150be esp8266/modnetwork: Use mp_handle_pending() to raise pending exception.
If MICROPY_ENABLE_SCHEDULER is enabled then MP_STATE_VM(sched_state) must
be updated after handling the pending exception, which is done by the
mp_handle_pending() function.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George c7aaee2b2b esp8266/modules: Fix fs_corrupted() to use start_sec not START_SEC.
START_SEC was changed in e0905e85a7.

Also, update the error message to mention how to format the partition at
the REPL, and make the total message shorter to save a bit of flash.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-09 10:46:07 +11:00
Damien George 9dedcf122d py/gc: Change include of stdint.h to stddef.h.
No std-int types are used in gc.h, but size_t is which needs stddef.h.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-05 15:46:56 +11:00
Damien George 7c44354592 ports: Remove def of MP_PLAT_PRINT_STRN if it's the same as the default.
To simplify config, there's no need to specify MP_PLAT_PRINT_STRN if it's
the same as the default definition in py/mpconfig.h.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:39:17 +11:00
Xiang Xiao 5fdf351178 py/gc: Don't include mpconfig.h and misc.h in gc.h.
Because gc.h doesn't reference any symbol from these header files.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-02-04 22:37:26 +11:00
Christopher Tse 5c37e76e4f esp8266/modules/neopixel.py: Add timing param to NeoPixel constructor.
This matches the esp32 port.
2021-01-30 14:35:54 +11:00
robert 5af3c046c7 esp32,esp8266: Remove "FAT" from warning message in inisetup.py.
Because FAT is not any more the only filesystem used.
2020-11-18 16:26:19 +11:00
robert 057193e855 esp8266/mpconfigport.h: Seed the urandom module on import.
For seeding, the hardware RNG of the esp8266 is used.
2020-10-29 14:12:44 +11:00
Damien George d4b61b0017 extmod/utime_mphal: Add generic utime.time_ns() function.
It requires mp_hal_time_ns() to be provided by a port.  This function
allows very accurate absolute timestamps.

Enabled on unix, windows, stm32, esp8266 and esp32.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 14:20:42 +10:00
Damien George 71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 39d50d129c ports: Add SoftI2C and SoftSPI to machine module where appropriate.
Previous commits removed the ability for one I2C/SPI constructor to
construct both software- or hardware-based peripheral instances.  Such
construction is now split to explicit soft and non-soft types.

This commit makes both types available in all ports that previously could
create both software and hardware peripherals: machine.I2C and machine.SPI
construct hardware instances, while machine.SoftI2C and machine.SoftSPI
create software instances.

This is a breaking change for use of software-based I2C and SPI.  Code that
constructed I2C/SPI peripherals in the following way will need to be
changed:

    machine.I2C(-1, ...)            ->  machine.SoftI2C(...)
    machine.I2C(scl=scl, sda=sda)   ->  machine.SoftI2C(scl=scl, sda=sda)

    machine.SPI(-1, ...)            ->  machine.SoftSPI(...)
    machine.SPI(sck=sck, mosi=mosi, miso=miso)
                        ->  machine.SoftSPI(sck=sck, mosi=mosi, miso=miso)

Code which uses machine.I2C and machine.SPI classes to access hardware
peripherals does not need to change.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 9e0533b9e1 extmod/machine_spi: Remove "id" arg in SoftSPI constructor.
The SoftSPI constructor is now used soley to create SoftSPI instances, it
can no longer delegate to create a hardware-based SPI instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 8f20cdc353 all: Rename absolute time-based functions to include "epoch".
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values.  And
different ports may use a different Epoch.

To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").

Along with this rename, the following things have changed:

- mp_hal_time_ns() is now specified to return the number of nanoseconds
  since the Epoch, rather than since 1970 (but since this is an internal
  function it doesn't change anything for the user).

- littlefs timestamps on the esp8266 have been fixed (they were previously
  off by 30 years in nanoseconds).

Otherwise, there is no functional change made by this commit.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 17:20:34 +10:00
Damien George bd7af6151d ports: Add utime.gmtime() function.
To portably get the Epoch.  This is simply aliased to localtime() on ports
that are not timezone aware.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:25:36 +10:00
Damien George b28758054b esp8266: Remove release-specific manifest, disable osdebug by default.
This commit removes release-specific builds for the esp8266 and makes the
normal build of the GENERIC board more like the release build.  This makes
esp8266 like all the other ports, for which there is no difference between
a daily build and a release build, making things less confusing.

Release builds were previously defined by UART_OS=-1 (disable OS messages)
and using manifest_release.py to include more frozen modules.

The changes in this commit are:
- Remove manifest_release.py.
- Add existing modules from manifest_release.py (except example code)
  to the GENERIC board's manifest.py file.
- Change UART_OS default to -1 to disable OS messages by default.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 16:01:42 +10:00
Damien George ee50a6effe py/mphal.h: Introduce mp_hal_time_ns and implement on various ports.
This should return a 64-bit value being the number of nanoseconds since
1970/1/1.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 16:13:44 +10:00
Olivier Ortigues e32302c1a6 esp8266/esppwm: Fix PWM glitch when setting duty on different channel.
The PWM driver uses a double buffer for the PWM timing array, one in
current use and the other one to update when changing duty parameters.
The issue was that once the duty parameters were changed the updated buffer
was applied immediately without synchronising to the start of the PWM
period.  By moving the buffer toggling/swapping to the interrupt when the
cycle is done there are no more glitches.
2020-05-27 16:15:28 +10:00
Rafael Römhild 8f3167a962 esp8266/boards: Allow configuring btree/FAT/LFS2 support when building.
Prior to e0905e85a7 it was possible to
disable btree support on build.  This patch allows to configure btree
support on make again and also the two new introduced options for FAT and
LFS2 filesystems.
2020-05-14 22:16:01 +10:00
Damien George 67fca2b715 esp8266/uart: Move a few functions from iRAM to iROM.
They call functions in iROM so do not need to be in iRAM.
2020-05-08 23:44:57 +10:00
Damien George f2218c2fbd esp8266/esp_mphal: Move most functions in esp_mphal.c from iRAM to iROM.
The ones that are moved out of iRAM should not need to be there, because
either they call functions in iROM (eg mp_hal_stdout_tx_str), or they are
only ever called from a function in iROM and not from an interrupt (eg
ets_esf_free_bufs).

This frees up about 800 bytes of iRAM.
2020-05-08 23:44:57 +10:00
Damien George caa7725642 esp8266/boards: Move py/pairheap.c code from iRAM to iROM.
It doesn't need to be in iRAM.
2020-05-08 23:40:22 +10:00
Damien George e12de1fd9d esp8266: Clean up Pin intr handler by moving all code to machine_pin.c.
The macro MP_FASTCODE is used to explicitly place required functions in
iRAM, instead of needing a separate .c file.
2020-05-08 23:40:22 +10:00
Damien George 419d1aa617 esp8266/mpconfigport.h: Add definitions for BEGIN/END_ATOMIC_SECTION.
These are needed to ensure correct operation of the MicroPython scheduler.
2020-04-30 23:47:11 +10:00
Damien George 0bd58a5613 esp8266/machine_pin: Move pin_intr_handler to iRAM, de-support hard IRQ.
GPIO interrupts can occur when the flash ROM cache is in use and so the
GPIO interrupt handler must be in iRAM.  This commit moves the handler to
iRAM, and also moves mp_sched_schedule to iRAM which is called by
pin_intr_handler.

As part of this fix the Pin class can no longer support hard=True in the
Pin.irq() method, because the VM and runtime are too big to put in iRAM.

Fixes #5714.
2020-04-30 23:47:11 +10:00
Damien George e08ca78f40 py/stream: Remove mp_stream_errno and use system errno instead.
This change is made for two reasons:

1. A 3rd-party library (eg berkeley-db-1.xx, axtls) may use the system
   provided errno for certain errors, and yet MicroPython stream objects
   that it calls will be using the internal mp_stream_errno.  So if the
   library returns an error it is not known whether the corresponding errno
   code is stored in the system errno or mp_stream_errno.  Using the system
   errno in all cases (eg in the mp_stream_posix_XXX wrappers) fixes this
   ambiguity.

2. For systems that have threading the system-provided errno should always
   be used because the errno value is thread-local.

For systems that do not have an errno, the new lib/embed/__errno.c file is
provided.
2020-04-27 23:58:46 +10:00
stijn 84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
stijn d6243568a0 all: Remove commented-out include statements. 2020-04-23 11:24:15 +10:00
Jim Mussared 073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Damien George 497ca99eb2 esp8266/makeimg.py: Print out info about RAM segments when building fw. 2020-04-04 16:30:39 +11:00
Damien George e0905e85a7 esp8266: Change from FAT to littlefs v2 as default filesystem.
This commit changes the esp8266 boards to use littlefs v2 as the
filesystem, rather than FAT.  Since the esp8266 doesn't expose the
filesystem to the PC over USB there's no strong reason to keep it as FAT.
Littlefs is smaller in code size, is more efficient in use of flash to
store data, is resilient over power failure, and using it saves about 4k of
heap RAM, which can now be used for other things.

This is a backwards incompatible change because all existing esp8266 boards
will need to update their filesystem after installing new firmware (eg
backup old files, install firmware, restore files to new filesystem).

As part of this commit the memory layout of the default board (GENERIC) has
changed.  It now allocates all 1M of memory-mapped flash to the firmware,
so the filesystem area starts at the 2M point.  This is done to allow more
frozen bytecode to be stored in the 1M of memory-mapped flash.  This
requires an esp8266 module with 2M or more of flash to work, so a new board
called GENERIC_1M is added which has the old memory-mapping (but still
changed to use littlefs for the filesystem).

In summary there are now 3 esp8266 board definitions:
- GENERIC_512K: for 512k modules, doesn't have a filesystem.
- GENERIC_1M: for 1M modules, 572k for firmware+frozen code, 396k for
  filesystem (littlefs).
- GENERIC: for 2M (or greater) modules, 968k for firmware+frozen code,
  1M+ for filesystem (littlefs), FAT driver also included in firmware for
  use on, eg, external SD cards.
2020-04-04 16:30:36 +11:00
Damien George 1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
Damien George 1d4d688b3b esp8266: Enable and freeze uasyncio.
Only included in GENERIC build.
2020-03-26 01:25:46 +11:00
Zoltán Vörös c5cc64175b ports: Add lib/libm/roundf.c to bare-metal Makefile's.
This function is not used by the core but having it as part of the build
allows it to be used by user C modules, or board extensions.  The linker
won't include it in the final firmware if it remains unused.
2020-03-25 01:22:00 +11:00
Damien George 9fa32169e9 esp8266/modnetwork: Add support for wlan.ifconfig('dhcp').
Fixes issue #5780.
2020-03-25 00:43:04 +11:00
Damien George feb2577585 all: Remove spaces between nested paren and inside function arg paren.
Using new options enabled in the uncrustify configuration.
2020-03-25 00:39:46 +11:00
Jim Mussared 0cd13081df esp8266/README.md: Add docker build instructions. 2020-03-22 13:26:03 +11:00
Damien George 8d34344dce esp8266/modmachine: Implement machine.soft_reset().
Fixes issue #5764.
2020-03-20 13:40:01 +11:00
Damien George a017576706 esp8266/machine_pin: Disable ets_loop_iter during hard IRQ handler.
Otherwise ets_loop_iter may be reentered.  Related to issue #5714.
2020-03-10 16:48:34 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George 3f39d18c2b all: Add *FORMAT-OFF* in various places.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments.  This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...).  In other places
it is used to prevent excessive reformatting that would make the code less
readable.
2020-02-28 10:31:07 +11:00
Damien George ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George 8d0421c3cf esp8266: Put mp_keyboard_interrupt in IRAM.
It was originally in IRAM due to the linker script specification, but
since the function moved from lib/utils/interrupt_char.c to py/scheduler.c
it needs to be put back in IRAM.
2020-02-07 16:08:31 +11:00
Damien George 98a3911c43 py/scheduler: Add "raise_exc" argument to mp_handle_pending.
Previous behaviour is when this argument is set to "true", in which case
the function will raise any pending exception.  Setting it to "false" will
cancel any pending exception.
2020-02-07 16:08:20 +11:00
Damien George e3ff52863b esp8266/modules/ntptime.py: Add comment about configuring NTP host.
The ability to change the host is a frequently requested feature, so
explicitly document how it can be achieved using the existing code.

See issues #2121, #4385, #4622, #5122, #5536.
2020-01-31 23:54:11 +11:00
JensDiemer c14ff6194c esp8266/modules: Fix AttributeError in _boot.py if flash not formatted.
Prior to this commit, if the flash filesystem was not formatted then it
would error: "AttributeError: 'FlashBdev' object has no attribute 'mount'".
That is due to it not being able to detect the filesystem on the block
device and just trying to mount the block device directly.

This commit fixes the issue by just catching all exceptions.  Also it's not
needed to try the mount if `flashbdev.bdev` is None.
2020-01-14 23:53:49 +11:00
David Lechner e79424d672 ports: Allow overriding CROSS_COMPILE in a custom makefile.
Many ports already allow overriding CROSS_COMPILE.  This modifies the
remaining ports to allow it as well.
2019-12-27 23:53:16 +11:00
Jim Mussared 7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Damien George b47e155bd0 py/persistentcode: Add ability to relocate loaded native code.
Implements text, rodata and bss generalised relocations, as well as generic
qstr-object linking.  This allows importing dynamic native modules on all
supported architectures in a unified way.
2019-12-12 20:15:28 +11:00
Damien George 799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George cea9209e0f esp8266/moduos: Add optional support for VfsLfs1 and VfsLfs2.
With this commit an esp8266-based board can now be built with littlefs
support via, eg "make MICROPY_VFS_LFS2=1".
2019-11-07 18:44:16 +11:00
Damien George 6eee5413ff esp8266/modules/flashbdev.py: Support extended block protocol. 2019-11-07 18:43:37 +11:00
Damien George c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Damien George cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Damien George d2384efa80 py: Automatically provide weak links from "foo" to "ufoo" module name.
This commit implements automatic module weak links for all built-in
modules, by searching for "ufoo" in the built-in module list if "foo"
cannot be found.  This means that all modules named "ufoo" are always
available as "foo".  Also, a port can no longer add any other weak links,
which makes strict the definition of a weak link.

It saves some code size (about 100-200 bytes) on ports that previously had
lots of weak links.

Some changes from the previous behaviour:
- It doesn't intern the non-u module names (eg "foo" is not interned),
  which saves code size, but will mean that "import foo" creates a new qstr
  (namely "foo") in RAM (unless the importing module is frozen).
- help('modules') no longer lists non-u module names, only the u-variants;
  this reduces duplication in the help listing.

Weak links are effectively the same as having a set of symbolic links on
the filesystem that is searched last.  So an "import foo" will search
built-in modules first, then all paths in sys.path, then weak links last,
importing "ufoo" if it exists.  Thus a file called "foo.py" somewhere in
sys.path will still have precedence over the weak link of "foo" to "ufoo".

See issues: #1740, #4449, #5229, #5241.
2019-10-22 15:30:52 +11:00
Damien George f1d91908fa esp8266/boards: Add manifest_release.py with files for a release.
A release also sets: UART_OS = -1
2019-10-22 00:23:22 +11:00
Jim Mussared df7f632fd7 esp8266: Allow building without a manifest. 2019-10-21 23:21:14 +11:00
Jim Mussared 8ba963cfa3 tools/makemanifest.py: Eval relative paths w.r.t. current manifest file.
When loading a manifest file, e.g. by include(), it will chdir first to the
directory of that manifest.  This means that all file operations within a
manifest are relative to that manifest's location.

As a consequence of this, additional environment variables are needed to
find absolute paths, so the following are added: $(MPY_LIB_DIR),
$(PORT_DIR), $(BOARD_DIR).  And rename $(MPY) to $(MPY_DIR) to be
consistent.

Existing manifests are updated to match.
2019-10-21 23:01:41 +11:00
Damien George 2fd3f2520d esp8266: Convert to use FROZEN_MANIFEST to specify frozen code.
Removes symlinks in modules directory, all frozen code is now specified by
manifest.py.
2019-10-15 21:36:02 +11:00
Damien George d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Damien George 79ab82ea77 esp8266/modules/ntptime.py: Always close socket, and set day-of-week.
Fixes issue #5189.
2019-10-10 18:05:56 +11:00
Mike Causer 53a9b45da1 esp8266: Add per-board configs, following other ports.
The specific board can be selected with the BOARD makefile variable.  This
defaults (if not specified) to BOARD=GENERIC, which is the original default
firmware build.  For the 512k target use BOARD=GENERIC_512K.
2019-10-10 16:32:25 +11:00
Damien George 0e72cc9029 esp8266/machine_adc: Add read_u16 method and refactor. 2019-09-05 22:13:04 +10:00
Damien George 625609a737 esp8266/machine_adc: Rename pyb_adc_* to machine_adc_*. 2019-09-04 16:17:10 +10:00
Damien George 060209240b esp8266: Put new profile code in iROM. 2019-08-30 16:49:02 +10:00
Damien George 96ace8082e esp8266/machine_uart: Allow remapping UART TX/RX pins from 1/3 to 15/13.
Via the standard tx/rx arguments: UART(0, 115200, tx=Pin(15), rx=Pin(13)).

Resolves issue #4718.
2019-08-21 21:16:40 +10:00
Damien George 2d3d4f7483 esp8266/mpconfigport.h: Enable lwIP raw sockets. 2019-08-06 15:56:05 +10:00
Damien George ef00048fed extmod/modwebrepl: Add config option to put filebuf[512] on stack/bss.
Since the esp8266 has a small stack this buffer is kept in the BSS.
2019-07-03 12:55:57 +10:00
Damien George 89a23a05b3 esp8266: Provide custom machine_time_pulse_us that feeds soft WDT.
So that the timeout for machine.time_pulse_us() can be large.

Fixes issue #2775.
2019-07-01 22:53:00 +10:00
Damien George c80614dfc8 ports: Provide mp_hal_stdio_poll for sys.stdio polling where needed. 2019-07-01 17:10:12 +10:00
Paul m. p. P 637aa9784d esp8266/uart: Fix invalid ringbuf name when event driven REPL enabled. 2019-06-17 12:34:10 +10:00
Damien George 5357dad52e esp8266: Fix ticks_ms to correctly handle wraparound of system counter.
Fixes issue #4795.
2019-05-24 15:37:34 +10:00
Paul Sokolovsky 016d9a40fe various: Add and update my copyright line based on git history.
For modules I initially created or made substantial contributions to.
2019-05-17 18:04:15 +10:00