3f5028c666
atmel-samd: Support wav file playback. Tested up to 16bit 22.1khz. Must be mono file!
...
SD card support may work but likely needs buffer tuning. Its untested.
Fixes #105
2017-05-15 19:52:38 -07:00
ef1a4847b3
shared-bindings: Correct PulseIn.resume to match docs. Fixes #125
2017-05-08 11:14:23 -07:00
58b9789d0c
atmel-samd: Introduce audio sample playback via audioio.AudioOut.
2017-05-01 13:10:03 -07:00
939c0045db
Switch to a shared piece of code to compute start and length of a
...
buffer from start, end and length. The old code miscomputed length
leading to writing and reading from memory past the end of the buffer.
Consolidating the code should make it easier to get right everywhere.
2017-04-20 11:24:05 -07:00
b653c3c8fc
Correct PulseOut example code
2017-04-13 17:52:13 -07:00
4a4f29b8f9
atmel-samd: Rework status LED implementation
...
* Track status pin use by user code separately so it can take over the pins and then give them back.
* Switch to hardware SPI for APA102 on Gemma and Trinket.
* Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 15:24:50 -07:00
f28f8ba568
Split up nativeio.
...
This was done to allow greatly granularity when deciding what functionality
is built into each board's build. For example, this way pulseio can be
omitted to allow for something else such as touchio.
2017-04-10 13:32:19 -07:00
ff208d7677
Add low-level OneWire support class.
...
This class focuses on the timing sensitive parts of the protocol.
Everything else will be done by Python code.
This also establishes that its OK to back a nativeio class with a
bitbang implementation when no hardware acceleration exists. When
it does, then bitbangio should be used to explicitly bitbang a
protocol.
2017-03-25 12:04:49 +00:00
7cb54864aa
Add PulseIn support which can be used to measure a series of pulse widths.
...
This is useful for infrared input and DHT sensors.
2017-03-24 10:30:15 +00:00
d200a62164
Add PulseOut which can pulse a PWMOut for IR remote transmission.
2017-03-10 19:17:54 +01:00
bccfbe4e00
Fix duty_cycle constructor argument to PWMOut.
2017-03-10 18:55:17 +01:00
4aaa0ea008
shared-bindings: Do a pass on the docs and make sure keyword only arguments make sense and are documented correctly. Fixes #109
2017-03-07 12:58:57 +01:00
3891dde7ff
shared-bindings: Reenable struct_time. It was turned off when playing with LTO and never re-enabled.
2017-03-07 12:47:26 +01:00
7ecbc3a148
shared-bindings: Fix two more try_locks. Copy and paste failed me.
2017-02-28 12:31:27 +01:00
d598c2a919
atmel-samd: Add USB HID mouse and keyboard support.
2017-02-27 15:43:58 +01:00
062fac1d43
atmel-samd: Use link time optimization to reduce code size of builds which
...
share space with the file system.
"Express" builds with SPI flash crash the compiler for some reason so its
currently disabled for them.
2017-02-26 01:00:33 +01:00
baf3ff377e
Make more type structures const to save RAM.
2017-02-24 15:23:26 +01:00
12fa5b3a66
Switch exception throwing to mp_raise helpers. It saves a little code space each time to share the call.
2017-02-24 15:13:07 +01:00
75d0b02b3f
Throw an error when sleep time is negative.
2017-02-22 20:41:00 +01:00
4c05086661
Check that neopixel write is actually given a DigitalInOut.
2017-02-22 20:10:10 +01:00
f0b62a2b0e
Save space by only supporting 800khz neopixels.
2017-02-19 17:22:42 +01:00
710b5d8aff
Two I2C fixes:
...
1) Bus error will be thrown on read/write errors with errno set. (Read didn't used to fail at all.)
2) try_lock correctly returns boolean whether lock was grabbed.
Fixes #87
2017-02-19 17:02:29 +01:00
e9659e61f8
Switch enum-like attributes to all caps and add print support for them. Make room for this functionality by adding a shared __enter__ function object. #76
2017-02-19 16:11:33 +01:00
d67968e3c3
Add print support to Pin. #83 #76
2017-02-19 14:23:29 +01:00
3dda38c8ab
Fix pin free check to ignore None objects. Fixes #89
2017-02-19 12:59:31 +01:00
1a3bd67833
nativeio.SPI: Remove extraneous constructor args because they are in configure.
2017-02-19 12:57:00 +01:00
370d1dec88
SPI tweaks for SD Cards:
...
* Always init SPI to 250k to start for SD cards.
* Add ability to configure byte written during read.
* Add ability to read and write to portions of buffers like existing I2C API.
2017-02-10 05:09:17 -08:00
9f6da7b2fe
Add more PWMOut examples and rename the duty constructor argument
...
to duty_cycle so that its consistent with the attribute.
Fixes #84
2017-02-01 15:07:31 -08:00
e3f9ee839a
Add frequency changing support to PWMOut.
...
You can either set it once up front, or set variable_frequency on custruction to
indicate that the frequency must be able to change. This informs whether a timer
can be shared amongst pins.
This also adds persistent clock calibration on atmel-samd. Once the device has
synced its clock frequency over USB it will remember that config value until USB
is used again. This helps ensure the clock frequency is similar on and off USB.
Lastly, this also corrects time.sleep() when on USB by correcting the tick counter.
2017-01-30 15:02:01 -08:00
d239dbdc28
More fixes to pin pull thanks to jerryn:
...
* Correct atmel-samd pin pull state.
* Correct conversion from python pull objects to C enum.
2017-01-16 15:32:23 -08:00
df96823dee
Fix pull kwarg DigitalInOut.switch_to_input and add example use to docs.
...
Thanks to jerryn from the Adafruit Forum for finding the bug!
2017-01-16 10:35:46 -08:00
cea5503ca0
Fixup warnings from merge about undefined macro values, switch to
...
VM keyboard exception and switch to FATFS reader.
2017-01-12 12:46:18 -08:00
161ab018ba
Correct monotonic.
...
Fixes #69 .
2017-01-08 22:10:33 -08:00
63681a736a
Link to the Bus Device docs.
2017-01-05 18:43:22 -08:00
7c302c395e
Improve docs and update to CircuitPython.
2017-01-05 16:20:46 -08:00
e52fbf2e6a
Add time.struct_time support.
2017-01-05 14:00:48 -08:00
f48d2df634
atmel-samd: Improve TouchIn to allow for multiple simultaneous touch pads.
2016-12-20 16:39:32 -08:00
427d33c706
atmel-samd: Add help() and remove mem_info functions from smallest builds to make room.
2016-12-19 16:38:35 -08:00
1598e44231
atmel-samd: Add preliminary support for UART
2016-12-19 13:03:50 -08:00
781633c716
Fix up Analog classes: unify them at 16 bits and adds reference_voltage member
...
to make for easy conversion. Fixes #14 .
2016-12-13 16:09:00 -08:00
3972bc19c7
atmel-samd: Basic capacitive touch button support.
...
Currently only works on a single channel and is only enabled for boards with
SPI flash. Only really designed for hardware testing at this point.
2016-12-12 15:11:25 -08:00
0ae344841f
atmel-samd & esp8266: Make sure pins are not already in use.
...
This prevents corrupting previous functional objects by stealing their pins
out from under them. It prevents this by ensuring that pins are in default
state before claiming them. It also verifies pins are released correctly and
reset on soft reset.
Fixes #4 , instantiating a second class will fail.
Fixes #29 , pins are now reset too.
2016-12-07 15:21:14 -08:00
26229efe78
Add try_lock and unlock to I2C and SPI classes to make sure things
...
are shared well between threads and underlying MicroPython (SPI Flash
for example.)
It is recommended to use the bus device classes to manage the locks
and other transaction state.
https://github.com/adafruit/Adafruit_MicroPython_BusDevice
Fixed #58
Fixed #59
Fixed #60
2016-12-02 15:46:12 -08:00
8ef0dd095a
Fix two bugs found by clang:
...
* PWMOut enter and exit weren't hooked up.
* end couldn't be negative in I2C.
2016-12-01 10:33:50 -08:00
9b3afc7b37
shared-bindings: Make MOSI and MISO optional for SPI.
2016-11-29 16:54:20 -08:00
4933fa1c27
shared-bindings: Ensure pin objects are actually pins.
...
Fixes #12
2016-11-29 15:50:01 -08:00
16764dfa31
shared-bindings: Fix blinky example. Fixes #55
2016-11-29 14:37:25 -08:00
d2aa05a9fe
shared-bindings: Stop using negative length at all. Having uint and int mixed is confusing.
2016-11-28 19:57:05 -08:00
bda6ee9a14
shared-bindings: Stop using max and min because C doesn't define them.
2016-11-28 19:48:48 -08:00
78f8565270
Add start and end kwargs to writeto and readfrom_into so a single buffer can be used to save memory.
2016-11-28 18:35:19 -08:00
Scott Shawcroft
Sebastian Plamauer