Support for Xtensa emitter and assembler, and upgraded F4 and F7 STM HAL
This release adds support for the Xtensa architecture as a target for the
native emitter, as well as Xtensa inline assembler. The int.from_bytes
and int.to_bytes methods now require a second argument (the byte order)
per CPython (only "little" is supported at this time). The "readall"
method has been removed from all stream classes that used it; "read" with
no arguments should be used instead. There is now support for importing
packages from compiled .mpy files. Test coverage is increased to 96%.
The generic I2C driver has improvements: configurable clock stretching
timeout, "stop" argument added to readfrom/writeto methods, "nack"
argument added to readinto, and write[to] now returns num of ACKs
received. The framebuf module now handles 16-bit depth (generic colour
format) and has hline, vline, rect, line methods. A new utimeq module is
added for efficient queue ordering defined by modulo time (to be
compatible with time.ticks_xxx functions). The pyboard.py script has been
modified so that the target board is not reset between scripts or commands
that are given on a single command line.
For the stmhal port the STM Cube HAL has been upgraded: Cube F4 HAL to
v1.13.1 (CMSIS 2.5.1, HAL v1.5.2) and Cube F7 HAL to v1.1.2. There is a
more robust pyb.I2C implementation (DMA is now disabled by default, can be
enabled via an option), and there is an implementation of machine.I2C with
robust error handling and hardware acceleration on F4 MCUs. It is now
recommended to use machine.I2C instead of pyb.I2C. The UART class is now
more robust with better handling of errors/timeouts. There is also more
accurate VBAT and VREFINT measurements for the ADC. New boards that are
supported include: NUCLEO_F767ZI, STM32F769DISC and NUCLEO_L476RG.
For the esp8266 port select/poll is now supported for sockets using the
uselect module. There is support for native and viper emitters, as well
as an inline assembler (with limited iRAM for storage of native functions,
or the option to store code to flash). There is improved software I2C
with a slight API change: scl/sda pins can be specified as positional only
when "-1" is passed as the first argument to indicate the use of software
I2C. It is recommended to use keyword arguments for scl/sda. There is
very early support for over-the-air (OTA) updates using the yaota8266
project.
A detailed list of changes follows.
py core:
- emitnative: fix native import emitter when in viper mode
- remove readall() method, which is equivalent to read() w/o args
- objexcept: allow clearing traceback with 'exc.__traceback__ = None'
- runtime: mp_resume: handle exceptions in Python __next__()
- mkrules.mk: rework find command so it works on OSX
- *.mk: replace uses of 'sed' with $(SED)
- parse: move function to check for const parse node to parse.[ch]
- parse: make mp_parse_node_new_leaf an inline function
- parse: add code to fold logical constants in or/and/not operations
- factor persistent code load/save funcs into persistentcode.[ch]
- factor out persistent-code reader into separate files
- lexer: rewrite mp_lexer_new_from_str_len in terms of mp_reader_mem
- lexer: provide generic mp_lexer_new_from_file based on mp_reader
- lexer: rewrite mp_lexer_new_from_fd in terms of mp_reader
- lexer: make lexer use an mp_reader as its source
- objtype: implement __call__ handling for an instance w/o heap alloc
- factor out common code from assemblers into asmbase.[ch]
- stream: move ad-hoc ioctl constants to stream.h and rename them
- compile: simplify configuration of native emitter
- emit.h: remove long-obsolete declarations for cpython emitter
- move arch-specific assembler macros from emitnative to asmXXX.h
- asmbase: add MP_PLAT_COMMIT_EXEC option for handling exec code
- asmxtensa: add low-level Xtensa assembler
- integrate Xtensa assembler into native emitter
- allow inline-assembler emitter to be generic
- add inline Xtensa assembler
- emitinline: embed entire asm struct instead of a pointer to it
- emitinline: move inline-asm align and data methods to compiler
- emitinline: move common code for end of final pass to compiler
- asm: remove need for dummy_data when doing initial assembler passes
- objint: from_bytes, to_bytes: require byteorder arg, require "little"
- binary: do zero extension when storing a value larger than word size
- builtinimport: support importing packages from compiled .mpy files
- mpz: remove unreachable code in mpn_or_neg functions
- runtime: zero out fs_user_mount array in mp_init
- mpconfig.h: enable MICROPY_PY_SYS_EXIT by default
- add MICROPY_KBD_EXCEPTION config option to provide mp_kbd_exception
- compile: add an extra pass for Xtensa inline assembler
- modbuiltins: remove unreachable code
- objint: rename mp_obj_int_as_float to mp_obj_int_as_float_impl
- emitglue: refactor to remove assert(0), to improve coverage
- lexer: remove unreachable code in string tokeniser
- lexer: remove unnecessary check for EOF in lexer's next_char func
- lexer: permanently disable the mp_lexer_show_token function
- parsenum: simplify and generalise decoding of digit values
- mpz: fix assertion in mpz_set_from_str which checks value of base
- mpprint: add assertion for, and comment about, valid base values
- objint: simplify mp_int_format_size and remove unreachable code
- unicode: comment-out unused function unichar_isprint
- consistently update signatures of .make_new and .call methods
- mkrules.mk: add MPY_CROSS_FLAGS option to pass flags to mpy-cross
- builtinimport: fix bug when importing names from frozen packages
extmod:
- machine_i2c: make the clock stretching timeout configurable
- machine_i2c: raise an error when clock stretching times out
- machine_i2c: release SDA on bus error
- machine_i2c: add a C-level I2C-protocol, refactoring soft I2C
- machine_i2c: add argument to C funcs to control stop generation
- machine_i2c: rewrite i2c.scan in terms of C-level protocol
- machine_i2c: rewrite mem xfer funcs in terms of C-level protocol
- machine_i2c: remove unneeded i2c_write_mem/i2c_read_mem funcs
- machine_i2c: make C-level functions return -errno on I2C error
- machine_i2c: add 'nack' argument to i2c.readinto
- machine_i2c: make i2c.write[to] methods return num of ACKs recvd
- machine_i2c: add 'stop' argument to i2c readfrom/writeto meths
- machine_i2c: remove trivial function wrappers
- machine_i2c: expose soft I2C obj and readfrom/writeto funcs
- machine_i2c: add hook to constructor to call port-specific code
- modurandom: allow to build with float disabled
- modframebuf: make FrameBuffer handle 16bit depth
- modframebuf: add back legacy FrameBuffer1 "class"
- modframebuf: optimise fill and fill_rect methods
- vfs_fat: implement POSIX behaviour of rename, allow to overwrite
- moduselect: use stream helper function instead of ad-hoc code
- moduselect: use configurable EVENT_POLL_HOOK instead of WFI
- modlwip: add ioctl method to socket, with poll implementation
- vfs_fat_file: allow file obj to respond to ioctl flush request
- modbtree: add method to sync the database
- modbtree: rename "sync" method to "flush" for consistency
- modframebuf: add hline, vline, rect and line methods
- machine_spi: provide reusable software SPI class
- modframebuf: make framebuf implement the buffer protocol
- modframebuf: store underlying buffer object to prevent GC free
- modutimeq: copy of current moduheapq with timeq support for refactoring
- modutimeq: refactor into optimized class
- modutimeq: make time_less_than be actually "less than", not less/eq
lib:
- utils/interrupt_char: use core-provided mp_kbd_exception if enabled
drivers:
- display/ssd1306.py: update to use FrameBuffer not FrameBuffer1
- onewire: enable pull up on data pin
- onewire/ds18x20: fix negative temperature calc for DS18B20
tools:
- tinytest-codegen: blacklist recently added uheapq_timeq test (qemu-arm)
- pyboard.py: refactor so target is not reset between scripts/cmd
- mpy-tool.py: add support for OPT_CACHE_MAP_LOOKUP_IN_BYTECODE
tests:
- micropython: add test for import from within viper function
- use read() instead of readall()
- basics: add test for logical constant folding
- micropython: add test for creating traceback without allocation
- micropython: move alloc-less traceback test to separate test file
- extmod: improve ujson coverage
- basics: improve user class coverage
- basics: add test for dict.fromkeys where arg is a generator
- basics: add tests for if-expressions
- basics: change dict_fromkeys test so it doesn't use generators
- basics: enable tests for list slice getting with 3rd arg
- extmod/vfs_fat_fileio: add test for constructor of FileIO type
- extmod/btree1: exercise btree.flush()
- extmod/framebuf1: add basics tests for hline, vline, rect, line
- update for required byteorder arg for int.from_bytes()/to_bytes()
- extmod: improve moductypes test coverage
- extmod: improve modframebuf test coverage
- micropython: get heapalloc_traceback test running on baremetal
- struct*: make skippable
- basics: improve mpz test coverage
- float/builtin_float_round: test round() with second arg
- basics/builtin_dir: add test for dir() of a type
- basics: add test for builtin locals()
- basics/set_pop: improve coverage of set functions
- run-tests: for REPL tests make sure the REPL is exited at the end
- basics: improve test coverage for generators
- import: add a test which uses ... in from-import statement
- add tests to improve coverage of runtime.c
- add tests to improve coverage of objarray.c
- extmod: add test for utimeq module
- basics/lexer: add a test for newline-escaping within a string
- add a coverage test for printing the parse-tree
- utimeq_stable: test for partial stability of utimeq queuing
- heapalloc_inst_call: test for no alloc for simple object calls
- basics: add tests for parsing of ints with base 36
- basics: add tests to improve coverage of binary.c
- micropython: add test for micropython.stack_use() function
- extmod: improve ubinascii.c test coverage
- thread: improve modthread.c test coverage
- cmdline: improve repl.c autocomplete test coverage
- unix: improve runtime_utils.c test coverage
- pyb/uart: update test to match recent change to UART timeout_char
- run-tests: allow to skip set tests
- improve warning.c test coverage
- float: improve formatfloat.c test coverage using Python
- unix: improve formatfloat.c test coverage using C
- unix/extra_coverage: add basic tests to import frozen str and mpy
- types1: split out set type test to set_types
- array: allow to skip test if "array" is unavailable
- unix/extra_coverage: add tests for importing frozen packages
unix port:
- rename define for unix moduselect to MICROPY_PY_USELECT_POSIX
- Makefile: update freedos target for change of USELECT config name
- enable utimeq module
- main: allow to print the parse tree in coverage build
- Makefile: make "coverage_test" target mirror Travis test actions
- moduselect: if file object passed to .register(), return it in .poll()
- Makefile: split long line for coverage target, easier to modify
- enable and add basic frozen str and frozen mpy in coverage build
- Makefile: allow cache-map-lookup optimisation with frozen bytecode
windows port:
- enable READER_POSIX to get access to lexer_new_from_file
stmhal port:
- dma: de-init the DMA peripheral properly before initialising
- i2c: add option to I2C to enable/disable use of DMA transfers
- i2c: reset the I2C peripheral if there was an error on the bus
- rename mp_hal_pin_set_af to _config_alt, to simplify alt config
- upgrade to STM32CubeF4 v1.13.0 - CMSIS/Device 2.5.1
- upgrade to STM32CubeF4 v1.13.0 - HAL v1.5.1
- apply STM32CubeF4 v1.13.1 patch - upgrade HAL driver to v1.5.2
- hal/i2c: reapply HAL commit ea040a4 for f4
- hal/sd: reapply HAL commit 1d7fb82 for f4
- hal: reapply HAL commit 9db719b for f4
- hal/rcc: reapply HAL commit c568a2b for f4
- hal/sd: reapply HAL commit 09de030 for f4
- boards: configure all F4 boards to work with new HAL
- make-stmconst.py: fix regex's to work with current CMSIS
- i2c: handle I2C IRQs
- dma: precalculate register base and bitshift on handle init
- dma: mark DMA sate as READY even if HAL_DMA_Init is skipped
- can: clear FIFO flags in IRQ handler
- i2c: provide custom IRQ handlers
- hal: do not include <stdio.h> in HAL headers
- mphalport.h: use single GPIOx->BSRR register
- make-stmconst.py: add support for files with invalid utf8 bytes
- update HALCOMMITS due to change to hal
- make-stmconst.py: restore Python 2 compatibility
- update HALCOMMITS due to change to hal
- moduselect: move to extmod/ for reuse by other ports
- i2c: use the HAL's I2C IRQ handler for F7 and L4 MCUs
- updates to get F411 MCUs compiling with latest ST HAL
- i2c: remove use of legacy I2C_NOSTRETCH_DISABLED option
- add beginnings of port-specific machine.I2C implementation
- i2c: add support for I2C4 hardware block on F7 MCUs
- i2c: expose the pyb_i2c_obj_t struct and some relevant functions
- machine_i2c: provide HW implementation of I2C peripherals for F4
- add support for flash storage on STM32F415
- add back GPIO_BSRRL and GPIO_BSRRH constants to stm module
- add OpenOCD configuration for STM32L4
- add address parameters to openocd config files
- adc: add "mask" selection parameter to pyb.ADCAll constructor
- adc: provide more accurate measure of VBAT and VREFINT
- adc: make ADCAll.read_core_temp return accurate float value
- adc: add ADCAll.read_vref method, returning "3.3v" value
- adc: add support for F767 MCU
- adc: make channel "16" always map to the temperature sensor
- sdcard: clean/invalidate cache before DMA transfers with SD card
- moduos: implement POSIX behaviour of rename, allow to overwrite
- adc: use constants from new HAL version
- refactor UART configuration to use pin objects
- uart: add support for UART7 and UART8 on F7 MCUs
- uart: add check that UART id is valid for the given board
- cmsis: update STM32F7 CMSIS device include files to V1.1.2
- hal: update ST32CubeF7 HAL files to V1.1.2
- port of f4 hal commit c568a2b to updated f7 hal
- port of f4 hal commit 09de030 to updated f7 hal
- port of f4 hal commit 1d7fb82 to updated f7 hal
- declare and initialise PrescTables for F7 MCUs
- boards/STM32F7DISC: define LSE_STARTUP_TIMEOUT
- hal: update HALCOMMITS due to change in f7 hal files
- refactor to use extmod implementation of software SPI class
- cmsis: add CMSIS file stm32f767xx.h, V1.1.2
- add NUCLEO_F767ZI board, with openocd config for stm32f7
- cmsis: add CMSIS file stm32f769xx.h, V1.1.2
- add STM32F769DISC board files
- move PY_SYS_PLATFORM config from board to general config file
- mpconfigport: add weak-module links for io, collections, random
- rename mp_const_vcp_interrupt to mp_kbd_exception
- usb: always use the mp_kbd_exception object for VCP interrupt
- use core-provided keyboard exception object
- led: properly initialise timer handle to zero before using it
- mphalport.h: explicitly use HAL's GPIO constants for pull modes
- usrsw: use mp_hal_pin_config function instead of HAL_GPIO_Init
- led: use mp_hal_pin_config function instead of HAL_GPIO_Init
- sdcard: use mp_hal_pin_config function instead of HAL_GPIO_Init
- add support for STM32 Nucleo64 L476RG
- uart: provide a custom function to transmit over UART
- uart: increase inter-character timeout by 1ms
- enable utimeq module
cc3200 port:
- tools/smoke.py: change readall() to read()
- pybspi: remove static mode=SPI.MASTER parameter for latest HW API
- mods/pybspi: remove SPI.MASTER constant, it's no longer needed
- update for moduselect moved to extmod/
- re-add support for UART REPL (MICROPY_STDIO_UART setting)
- enable UART REPL by default
- README: (re)add information about accessing REPL on serial
- make: rename "deploy" target to "deploy-ota"
- add targets to erase flash, deploy firmware using cc3200tool
- README: reorganize and update to the current state of affairs
- modwlan: add network.WLAN.print_ver() diagnostic function
esp8266 port:
- enable uselect module
- move websocket_helper.py from scripts to modules for frozen BC
- refactor to use extmod implementation of software SPI class
- mpconfigport_512k: disable framebuf module for 512k build
- enable native emitter for Xtensa arch
- enable inline Xtensa assembler
- add "ota" target to produce firmware binary for use with yaota8266
- use core-provided keyboard exception object
- add "erase" target to Makefile, to erase entire flash
- when doing GC be sure to trace the memory holding native code
- modesp: flash_user_start(): support configuration with yaota8266
- force relinking OTA firmware image if built after normal one
- scripts/inisetup: dump FS starting sector/size on error
- Makefile: produce OTA firmware as firmware-ota.bin
- modesp: make check_fw() work with OTA firmware
- enable utimeq module
- Makefile: put firmware-ota.bin in build/, for consistency
- modules/flashbdev: add RESERVED_SECS before the filesystem
- modules/flashbdev: remove code to patch bootloader flash size
- modules/flashbdev: remove now-unused function set_bl_flash_size
- modules/flashbdev: change RESERVED_SECS to 0
zephyr port:
- add .gitignore to ignore Zephyr's "outdir" directory
- zephyr_getchar: update to Zephyr 1.6 unified kernel API
- switch to Zephyr 1.6 unified kernel API
- support raw REPL
- implement soft reset feature
- main: initialize sys.path and sys.argv
- use core-provided keyboard exception object
- uart_core: access console UART directly instead of printk() hack
- enable slice subscription
docs:
- remove references to readall() and update stream read() docs
- library/index: elaborate on u-modules
- library/machine.I2C: refine definitions of I2C methods
- library/pyb.Accel: add hardware note about pins used by accel
- library/pyb.UART: added clarification about timeouts
- library/pyb.UART: moved writechar doc to sit with other writes
- esp8266/tutorial: update intro to add Getting the firmware section
- library/machine.I2C: fix I2C constructor docs to match impl
- esp8266/tutorial: close socket after reading page content
- esp8266/general: add "Scarcity of runtime resources" section
- library/esp: document esp.set_native_code_location() function
- library/esp: remove para and add further warning about flash
- usocket: clarify that socket timeout raises OSError exception
travis:
- build STM32 F7 and L4 boards under Travis CI
- include persistent bytecode with floats in coverage tests
examples:
- hwapi: button_led: Add GPIO pin read example
- hwapi: add soft_pwm example converted to uasyncio
- http_client: use read() instead of readall()
- hwapi: add uasyncio example of fading 2 LEDs in parallel
- hwapi: add example for machine.time_pulse_us()
- hwapi: add hwconfig for console tracing of LED operations
- accellog.py: change 1: to /sd/, and update comment about FS
- hwapi/hwconfig_console: don't alloc memory in value()
Docs are here: http://tannewt-micropython.readthedocs.io/en/microcontroller/
It differs from upstream's machine in the following ways:
* Python API is identical across ports due to code structure. (Lives in shared-bindings)
* Focuses on abstracting common functionality (AnalogIn) and not representing structure (ADC).
* Documentation lives with code making it easy to ensure they match.
* Pin is split into references (board.D13 and microcontroller.pin.PA17) and functionality (DigitalInOut).
* All nativeio classes claim underlying hardware resources when inited on construction, support Context Managers (aka with statements) and have deinit methods which release the claimed hardware.
* All constructors take pin references rather than peripheral ids. Its up to the implementation to find hardware or throw and exception.
Checks for number of args removes where guaranteed by function descriptor,
self checking is replaced with mp_check_self(). In few cases, exception
is raised instead of assert.
They are sugar for marking function as generator, "yield from"
and pep492 python "semantically equivalents" respectively.
@dpgeorge was the original author of this patch, but @pohmelie made
changes to implement `async for` and `async with`.
Passing an mp_uint_t to a %d printf format is incorrect for builds where
mp_uint_t is larger than word size (eg a nanboxing build). This patch
adds some simple casting to int in these cases.
The first argument to the type.make_new method is naturally a uPy type,
and all uses of this argument cast it directly to a pointer to a type
structure. So it makes sense to just have it a pointer to a type from
the very beginning (and a const pointer at that). This patch makes
such a change, and removes all unnecessary casting to/from mp_obj_t.
MICROPY_ENABLE_COMPILER can be used to enable/disable the entire compiler,
which is useful when only loading of pre-compiled bytecode is supported.
It is enabled by default.
MICROPY_PY_BUILTINS_EVAL_EXEC controls support of eval and exec builtin
functions. By default they are only included if MICROPY_ENABLE_COMPILER
is enabled.
Disabling both options saves about 40k of code size on 32-bit x86.
This allows the mp_obj_t type to be configured to something other than a
pointer-sized primitive type.
This patch also includes additional changes to allow the code to compile
when sizeof(mp_uint_t) != sizeof(void*), such as using size_t instead of
mp_uint_t, and various casts.
Hashing is now done using mp_unary_op function with MP_UNARY_OP_HASH as
the operator argument. Hashing for int, str and bytes still go via
fast-path in mp_unary_op since they are the most common objects which
need to be hashed.
This lead to quite a bit of code cleanup, and should be more efficient
if anything. It saves 176 bytes code space on Thumb2, and 360 bytes on
x86.
The only loss is that the error message "unhashable type" is now the
more generic "unsupported type for __hash__".
Having NotImplemented as MP_OBJ_SENTINEL turned out to be problematic
(it needs to be checked for in a lot of places, otherwise it'll crash
as would pass MP_OBJ_IS_OBJ()), so made a proper singleton value like
Ellipsis, both of them sharing the same type.
From https://docs.python.org/3/library/constants.html#NotImplemented :
"Special value which should be returned by the binary special methods
(e.g. __eq__(), __lt__(), __add__(), __rsub__(), etc.) to indicate
that the operation is not implemented with respect to the other type;
may be returned by the in-place binary special methods (e.g. __imul__(),
__iand__(), etc.) for the same purpose. Its truth value is true."
Some people however appear to abuse it to mean "no value" when None is
a legitimate value (don't do that).
This fixes a long standing problem that viper code generation gave
terrible error messages, and actually no errors on pyboard where
assertions are disabled.
Now all compile-time errors are raised as proper Python exceptions, and
are of type ViperTypeError.
Addresses issue #940.
Previous to this patch the printing mechanism was a bit of a tangled
mess. This patch attempts to consolidate printing into one interface.
All (non-debug) printing now uses the mp_print* family of functions,
mainly mp_printf. All these functions take an mp_print_t structure as
their first argument, and this structure defines the printing backend
through the "print_strn" function of said structure.
Printing from the uPy core can reach the platform-defined print code via
two paths: either through mp_sys_stdout_obj (defined pert port) in
conjunction with mp_stream_write; or through the mp_plat_print structure
which uses the MP_PLAT_PRINT_STRN macro to define how string are printed
on the platform. The former is only used when MICROPY_PY_IO is defined.
With this new scheme printing is generally more efficient (less layers
to go through, less arguments to pass), and, given an mp_print_t*
structure, one can call mp_print_str for efficiency instead of
mp_printf("%s", ...). Code size is also reduced by around 200 bytes on
Thumb2 archs.
Fixes msvc linker warnings about mismatching sizes between the mp_obj_fdfile_t
struct defined in file.c and the mp_uint_t declarations found in modsys.c and modbuiltins.c
This patch allows to reuse vstr memory when creating str/bytes object.
This improves memory usage.
Also saves code ROM: 128 bytes on stmhal, 92 bytes on bare-arm, and 88
bytes on unix x64.
This patch makes MICROPY_PY_BUILTINS_SET compile-time option fully
disable the builtin set object (when set to 0). This includes removing
set constructor/comprehension from the grammar, the compiler and the
emitters. Now, enabling set costs 8168 bytes on unix x64, and 3576
bytes on stmhal.
This patch adds a configuration option (MICROPY_CAN_OVERRIDE_BUILTINS)
which, when enabled, allows to override all names within the builtins
module. A builtins override dict is created the first time the user
assigns to a name in the builtins model, and then that dict is searched
first on subsequent lookups. Note that this implementation doesn't
allow deleting of names.
This patch also does some refactoring of builtins code, creating the
modbuiltins.c file.
Addresses issue #959.
