djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
31,414 Commits 21 Branches 274 Tags 785 MiB
06639a2473
Commit Graph

10143 Commits

Author SHA1 Message Date
Jeff Epler
b4be2317cb
rp2040: Avoid screeches due to audio underflow during flash writes 
By pausing audio during flash writes, the worst screeching of #8121
is avoided. I don't consider this a full fix, but it greatly improves
the by far most common scenario in which the problem occurs.

Tested on rp2040 prop feather with a midi synth playing arpeggios. When
writing to the flash e.g., with
```
dd bs=512 count=32 if=/dev/zero of=/media/jepler/CIRCUITPY/boop
```
the audio goes "tap tap tap tap" during the flash write instead of the
squawking.

This isn't a 100% fix; it will still glitch out, including during USB
enumeration which must be taking a long time without servicing background
tasks. Add a delay if not usb-connected at startup ameliorates this
greatly.
 2023-06-26 10:34:29 -05:00
Neradoc
232e096f93 fix board.BUTTON on espressif_esp32c3_devkitm_1_n4 2023-06-25 17:05:49 +02:00
Dan Halbert
fde6342705
Revert "nrf: prevent I2C hangs" 2023-06-23 13:20:41 -04:00
Dan Halbert
ffebb5af8a
Merge pull request #8094 from furbrain/fix_i2c_hangs 
Fix for #8093
 2023-06-23 13:12:24 -04:00
Dan Halbert
540bf58102 improve start_ap() doc; make "authmode" use consistent internally 2023-06-22 16:24:18 -04:00
Scott Shawcroft
28b0e34d76
Merge pull request #8099 from strid3r21/main 
added bee data logger
 2023-06-21 09:52:26 -07:00
Dan Halbert
60adfa4e6b
Merge pull request #8089 from furbrain/main 
Reset UART on deinit, reduces power consumption on nRF
 2023-06-20 19:48:37 -04:00
paul
9a2e9f7e41 added bee data logger 2023-06-20 18:50:15 -04:00
Phil Underwood
a753490899 Refactor out test for bus sanity state 2023-06-20 23:32:00 +01:00
Scott Shawcroft
9bce4ac30c
Merge pull request #8090 from kamtom480/sdk3.0.1 
spresense: update SDK to 3.0.1
 2023-06-20 13:11:45 -07:00
Phil Underwood
028a81922b
Remove unneeded #define from I2C.c 2023-06-20 13:36:12 +01:00
Phil Underwood
fae14cc55b Fix for #8093 
This adds a check to make sure that SDA and SCL are in a sane condition
before starting any I2C operation. If they are not it tries to rectify it,
and then returns an error code if unable to do so.
 2023-06-19 22:20:46 +01:00
Phil Underwood
4bb475b930 formatting 2023-06-17 22:49:47 +01:00
Phil Underwood
ec1e7a03b3 Reset UART on deinit, reduces power consumption 2023-06-17 22:42:12 +01:00
leosun
7354e2ad03 fix invalid pin error when create busio.SPI 
on specific SCK/MOSI/MISO pins, the `common_hal_busio_spi_construct`
method always skip miso pins which will lead to a `invalid pin`
exception when SPI initilized
 2023-06-15 07:48:19 +08:00
Kamil Tomaszewski
979f2f5ef3 spresense: update SDK to 3.0.1 2023-06-14 12:30:39 +02:00
Jeff Epler
666fb94ca3
Merge pull request #8056 from jepler/matrixportal-s3 
Add Adafruit MatrixPortal S3 board def & update protomatter
 2023-06-13 19:34:08 -05:00
Melissa LeBlanc-Williams
46de2cb682 Add buttons and accelerometer interrupt 2023-06-13 07:59:33 -07:00
Scott Shawcroft
a5e3c6ee82
Merge pull request #8077 from jepler/nrf-synthio 
nrf52840: allow 12 voices
 2023-06-12 12:44:08 -07:00
Seon Rozenblum
14af662ab9 Added support for Unexpected Maker NANOS3 2023-06-12 20:32:46 +10:00
Jeff Epler
d5a2293784 nrf52840: allow 12 voices 
In my testing, the feather bluefruit can do 12 voices at 48kHz!
This is a simple case (no LFOs, no ring modulation) so other situations might
require a lower sample rate, fewer voices, or both.

The sound is a little artifacty & low-fi but I think that's down to the speaker
& use of PWM instead of I2S.
 2023-06-09 11:30:12 -05:00
Dan Halbert
4d5caff0ed fix missing newline 2023-06-08 13:02:24 -04:00
Dan Halbert
46ddacddde
Merge branch 'main' into efr32-doc-fixes 2023-06-08 12:57:09 -04:00
Dan Halbert
6cf7e45f10
Merge pull request #8037 from jpconstantineau/fix-PCA10100 
fix to make buttons and leds compatible with pca10056
 2023-06-08 12:56:09 -04:00
Mario Bodemann
1e3f1d745a Update badger2040 start sequence for more contrast 
This change is taken from the pico-sdk: https://github.com/pimoroni/pimoroni-pico/blob/main/drivers/uc8151_legacy/uc8151_legacy.cpp#L67-L120 and increases the contrast of pictures sent dramatically. It comes with the expense of using way more time when updating though.
 2023-06-08 18:25:45 +02:00
Jeff Epler
d4913b04e0 rgbmatrix: update protomatter 
and re-organize so that esp32 s2/s3 don't do as much at reset

.. it's not necessary (because most data is in esp-idf managed memory)
and doing this saves me from having to debug why reconstruct isn't working
properly on that platform.

This needs to be tested on other platforms again before being merged!
 2023-06-08 10:43:32 -05:00
Jeff Epler
c408193ffe
Merge pull request #8048 from jepler/synthio-biquad 
Synthio: switch to per-note biquad filtering
 2023-06-07 14:48:31 -05:00
applecuckoo
40a31390aa
Remove available modules section 2023-06-07 07:30:02 +12:00
Dan Halbert
e631350b9b
Merge pull request #8070 from dhalbert/port-specific-submodules 
Provide port-specific fetch of submodules
 2023-06-06 14:46:39 -04:00
Dan Halbert
38f6fa27e3 fetch-port-submodules; fetch-all-submodules 2023-06-05 17:23:34 -04:00
applecuckoo
2d78cf3428
Merge branch 'adafruit:main' into efr32-doc-fixes 2023-06-06 08:56:40 +12:00
Jeff Epler
ce84ecf3f6
Fix flash size 2023-06-01 18:57:18 -05:00
Jeff Epler
2fb42579e8
Add minimally tested Adafruit MatrixPortal S3 board def 
tested:
 * board.LED
 * neopixel as status LED
 * i2c scan finds lis3dh sensor
 * psram capacity

not tested:
 * rgb matrix      o_O
 * the gpio pins

Introduce new `board` properties for matrixportal-style boards:
 * MTX_COMMON
 * MTX_ADDRESS

These are intended to simplify use of the RGBMatrix constructor:
```py
matrix = RGBMatrix(..., addr_pins=MTX_ADDRESS[:3], **MTX_COMMON)
```
removing the need for sending in the following individual parameters:
 * rgb_pins
 * clock_pin
 * latch_pin
 * output_enable_pins
and making construction of a 16/32/64-row display easy by slicing a tuple
of all address pins rather than writing out the individual pins. If it
works out it'll be ported back to the matrixportal m4 as well.
 2023-06-01 17:23:34 -05:00
Pierre Constantineau
6fd700eb11 added HW_LED_STATUS as requested 2023-06-01 10:56:43 -06:00
Scott Shawcroft
f2f19e93ec
Fix listing 2023-06-01 09:47:30 -07:00
tomiahola
31f2faa977
SAM E54 Xplained Pro: add support for SST26VF064B flash chip 2023-06-01 08:36:25 +03:00
Jeff Epler
fed8d5825b
synthio: add biquad filter type & basic filter calculations 
the filter cannot be applied as yet.
 2023-05-29 09:50:18 -05:00
hyx0329
d73f390a4d
M60 keyboard: allow run on battery 
This also expose the battery control pin as BATTERY_ENABLE,
so users can fully power off the keyboard.
 2023-05-28 12:11:34 +08:00
applecuckoo
60935c29eb
Fix up EFR32 port readme 2023-05-28 16:01:59 +12:00
Pierre Constantineau
60ce38ed8b fix trailing space of pins.c 2023-05-26 13:30:32 -06:00
Pierre Constantineau
325037b75e fix to make buttons and leds compatible with pca10056 2023-05-26 13:17:05 -06:00
Dan Halbert
ff2003145f
Merge pull request #8025 from tkroo/patch-1 
update spi pins to match schematic
 2023-05-23 23:11:16 -04:00
Dan Halbert
b9bb966835
Merge pull request #8026 from phamhuyvn/patch-1 
Update pins.c
 2023-05-23 23:10:45 -04:00
Dan Halbert
713d86f42b
Merge pull request #8021 from SiliconLabs/dev 
Silabs fixes, BLE bonding and peripheral changes
 2023-05-23 23:10:19 -04:00
phamhuyvn
2d7fa6dd8a
Update pins.c 
Fixed Button_R from GPIO6 to GPIO7
Fixed LCD_BACKLIGHT from GPIO29 to GPIO26
 2023-05-24 08:44:57 +07:00
David Sullivan
d570b8b4ef update spi pins to match schematic 2023-05-23 17:42:36 -07:00
David Sullivan
72b1bc890f
Update spi pins in mpconfigboard.h 2023-05-23 17:27:53 -07:00
David Sullivan
3f845fe8fd board files for lolin-s3-mini 2023-05-23 14:24:28 -07:00
Dan Halbert
b26e4ca0ae
Merge pull request #7985 from jepler/synthio-lfo-dag 
synthio: Add LFOs
 2023-05-23 15:48:11 -04:00
Dan Halbert
2422179419
Merge pull request #8014 from tkroo/lolin-c3-pico 
Board files for LOLIN C3 PICO
 2023-05-23 15:02:20 -04:00
Scott Shawcroft
596773286d
Merge pull request #8016 from charlieh0tel/new-mimxrt1060-evkb-board 
Adds MIMXRT1060-EVKB as new board.
 2023-05-23 11:11:32 -07:00
Christopher Hoover
49b1368d65 Changed PID to 0x813C. 2023-05-22 20:06:50 -07:00
David Sullivan
a163273ee0
Update ports/espressif/boards/lolin_c3_pico/mpconfigboard.h 
update board I2C pins.

Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2023-05-22 19:00:16 -07:00
Scott Shawcroft
9040ac8bc6
Merge pull request #8003 from dhalbert/esp-touch-alarm-fix 
Esp touch alarm fix
 2023-05-22 13:43:54 -07:00
David Sullivan
a5df186fa7 change copyright notice 2023-05-22 13:30:36 -07:00
Scott Shawcroft
3f7e6db4fa
Merge pull request #8015 from dhalbert/rp2040-sleep-memory 
RP2040 SleepMemory
 2023-05-22 13:08:37 -07:00
David Sullivan
7048ce46b1 match pins to what wemos uses 2023-05-22 10:06:50 -07:00
David Sullivan
393c0bb1f6 move sck, scl, and sda pin assignments 2023-05-21 23:27:58 -07:00
Christopher Hoover
73299ae48c Adds new board for MIMRT1060-EVKB (not to be confused with MIMRT1060-EVK). 2023-05-21 17:42:30 -07:00
Dan Halbert
955d2723d0 RP2040 SleepMemory 2023-05-21 19:05:25 -04:00
David Sullivan
0a1b2f8771 include neopixel lib 2023-05-21 14:30:51 -07:00
David Sullivan
a64d66846b remove leftover files 2023-05-21 12:45:23 -07:00
David Sullivan
ebd7e29b98 create files 2023-05-21 11:35:11 -07:00
David Sullivan
612dbc0500 update board name 2023-05-21 11:34:54 -07:00
David Sullivan
18213c4e87 increment creation id 2023-05-21 11:34:33 -07:00
rcarteraz
a4a4bdfeb0
Update board.c 
Change column start from 52 to 53 to fix a line at the top of the display.
 2023-05-20 18:33:37 -07:00
David Sullivan
437d8d7a38
Board files for LOLIN S3 MINI 2023-05-20 18:17:10 -07:00
Dan Halbert
d755238005 add pin_skip_reset_once capability 2023-05-19 15:08:53 -04:00
Jeff Epler
4da32a7b86
Merge remote-tracking branch 'origin/main' into synthio-lfo-dag 2023-05-19 11:56:13 -05:00
Dan Halbert
9e995a5e98 Fix Espressif TouchAlarm 2023-05-19 12:36:28 -04:00
Scott Shawcroft
02cb13e1a1
Merge pull request #7941 from bill88t/m5timer 
M5 Timer Camera X
 2023-05-19 09:13:22 -07:00
Scott Shawcroft
177b98174e
Shrink by combining error messages 2023-05-18 16:24:37 -07:00
Scott Shawcroft
9d11bda9e8
Fix memoryview.cast over sliced memoryview 
Fixes #4758
 2023-05-18 13:26:50 -07:00
Bill Sideris
a731c26f01
Update m5x creator id 2023-05-18 22:29:21 +03:00
Bill Sideris
302cdad4ca
m5x camera working 2023-05-18 21:39:59 +03:00
Bill Sideris
ed0cc9295f
More camera pin definition improvements 2023-05-18 19:07:48 +03:00
Bill Sideris
d426ba79f9
Merge branch 'adafruit:main' into m5timer 2023-05-18 15:13:24 +03:00
Jeff Epler
4901bdceb7
synthio: disable on more boards where it stopped fitting 2023-05-17 18:49:45 -05:00
Jeff Epler
391438102b
synthio: Finish implementing Math blocks 2023-05-17 16:32:20 -05:00
Dan Halbert
f2bfced407
Merge pull request #7976 from anecdata/ap_ipv4_picow 
Allow Access Point static IPv4 on the raspberrypi port
 2023-05-16 18:45:22 -04:00
Dan Halbert
d945d8b6e0
Merge pull request #7988 from Neradoc/add-feather-rp2040-button-pin 
Add the Feather RP2040 boot button to the board module ?
 2023-05-16 18:41:15 -04:00
Dan Halbert
ab83c98c1d
Merge pull request #7982 from bill88t/picow-stop-ap 
Await `CYW43_LINK_DOWN` in `stop_station`
 2023-05-16 12:31:46 -04:00
silabs-ChatNguyen
8ca87a5d27 Fix ble bonding fail 2023-05-16 09:46:15 +07:00
Jeff Epler
f83212314e
synthio: Add LFOs 2023-05-15 21:15:39 -05:00
Bill Sideris
95c1d849d3
Just 500 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2023-05-16 04:47:44 +03:00
Dan Halbert
afdc3a5ced
Merge pull request #7973 from tannewt/maybe_help_c3 
Check usb/jtag for incoming chars too
 2023-05-15 21:44:46 -04:00
Dan Halbert
c1f7f8009e
Merge pull request #7972 from tannewt/improve_c3 
Minor C3 debug tweaks
 2023-05-15 21:33:12 -04:00
Scott Shawcroft
10b2e6bb4a
Add defined check 2023-05-15 13:04:12 -07:00
Bill Sideris
ed31c7dc8f
Await down on stop_station 2023-05-15 22:38:59 +03:00
anecdata
4ac7e7643a
netutils dhcp server 2023-05-14 17:44:27 -05:00
anecdata
6dd2e86727
remove dhcp calls 2023-05-14 14:52:49 -05:00
anecdata
cd41fb101a
oops 2023-05-13 22:55:08 -05:00
anecdata
8196366c94 initial 2023-05-13 22:06:16 -05:00
Neradoc
16c8c9a739 Add the Feather RP2040 button to the board module 2023-05-13 22:13:47 +02:00
Eric Rong
91380f1957
Update to use new display construct. 2023-05-12 22:28:11 -07:00
Eric Rong
22665a113d
Merge branch 'adafruit:main' into lilygo_t_display_rp2040 2023-05-12 22:02:16 -07:00
Eric Rong
49a5518bd3
Attempt to fix build error 2023-05-12 18:19:49 -07:00
Eric Rong
285131a87a
Update typo on pin GP2 2023-05-12 18:04:07 -07:00
Eric Rong
8a3dc92920
Update with the official VID/PID for CircuitPython 2023-05-12 17:45:33 -07:00
Scott Shawcroft
bd097de277
Check usb/jtag for incoming chars too 2023-05-12 16:49:42 -07:00
Dan Halbert
827eaeb1f9
Merge pull request #7962 from tannewt/inky_frame_5_7 
Add Pimoroni Inky Frame 5.7
 2023-05-12 18:22:42 -04:00
Scott Shawcroft
bd2c1198d9
Minor C3 debug tweaks 2023-05-12 14:51:59 -07:00
Scott Shawcroft
ca01200b4f
Merge pull request #7965 from dhalbert/stm-rtc-monotonic 
STM: monotonic time even when RTC is changed
 2023-05-12 13:43:13 -07:00
Dan Halbert
e8067851f5 fix subticks handling 2023-05-12 14:39:57 -04:00
Scott Shawcroft
0a3faf8c9d
Merge pull request #7959 from jepler/synthio-bend-pan-ring 
Synthio: next round of features
 2023-05-12 08:54:49 -07:00
Scott Shawcroft
db8bd56c6c
Merge pull request #7946 from anecdata/ap_ipv4 
Allow Access Point static IPv4 on the espressif port
 2023-05-12 08:47:07 -07:00
Scott Shawcroft
02d4c8153b
Merge pull request #7953 from jepler/issue7944-v3 
Fix some regressions on feather M7
 2023-05-12 08:34:39 -07:00
Bojan Potočnik
74624e7c22
Add missing ESP32-S3 pins to microcontroller module 
ESP32-S3 defines two additional general use pins in
ports/espressif/peripherals/esp32s3/pins.h, for which
support is missing in the microcontroller module HAL.
 2023-05-12 09:10:26 +02:00
Dan Halbert
0b2f857542 STM: monotonic time even when RTC is changed 2023-05-12 00:28:37 -04:00
Jeff Epler
5a5474b5dc
mimxrt: 101x: MIDI_RX_BUFSIZE must be 512 
It's not clear why this is required, but otherwise it stops
midi_intest1 from ever receiving any MIDI events.

Closes: #7944
 2023-05-11 21:47:54 -05:00
Jeff Epler
137e55696e
Merge pull request #7964 from tannewt/fix_imx_usb_reset 
Correct pad count.
 2023-05-11 21:47:36 -05:00
Scott Shawcroft
a56174dc10
Correct pad count. 
This prevents running into the pins that cannot be reset. On 1011
it was off by one pin that isn't attached to the package. So,
having the USB pins forbidden prevented resetting to a NULL address.

Fixes #7952
 2023-05-11 15:02:56 -07:00
Dan Halbert
d99b0634f7 Report SPI frequency accurately on Espressif 2023-05-11 16:57:07 -04:00
Jeff Epler
23baf02399
synthio: disable on a few boards where it doesn't fit 2023-05-11 15:22:48 -05:00
Scott Shawcroft
cbfb2d0f55
Add Pimoroni Inky Frame 5.7 
Tweak DTCM and ITCM loading and prevent epd refresh while waiting
for autoreload.
 2023-05-11 12:12:34 -07:00
Alex Sirota
55d8f0db4e Add board.DISPLAY to hack_club_sprig 2023-05-10 11:24:26 -07:00
anecdata
29bf64decb raspberrypi common-hal f(x)s Not Implemented 2023-05-08 22:41:33 -05:00
Scott Shawcroft
9e4dea7b15
Merge pull request #7933 from jepler/synthio-note 
synthio: add 'Note' with arbitrary frequency and more
 2023-05-08 13:32:37 -07:00
anecdata
2f2a9e7e28 Allow Access Point static IPv4 on the espressif port. 2023-05-08 13:25:52 -05:00
Scott Shawcroft
7cd65ffb40
Merge pull request #7942 from furbrain/main 
Add memorymap support to nrf boards
 2023-05-08 10:42:29 -07:00
Phil Underwood
bcd9d6bacc Add memorymap to nrf52840 devices only 2023-05-07 18:21:22 +01:00
Phil Underwood
fe90cc759a remove excess line 2023-05-07 16:09:44 +01:00
Phil Underwood
a31dc5cc70
Merge branch 'adafruit:main' into main 2023-05-07 16:07:16 +01:00
Phil Underwood
3abcc6a2c3 Add memorymap support for the nRF processors. 
This gives very permissive access to the internals of the microprocessor.
It needs the user to be **very** careful that they do not break things
 2023-05-07 15:58:25 +01:00
Bill Sideris
f63aac9e52
Merge branch 'adafruit:main' into m5timer 2023-05-07 16:49:02 +03:00
Bill Sideris
f4079b6799
add preliminary support for m5stack_timer_camera_x 2023-05-07 16:47:57 +03:00
RetiredWizard
a52d0c742e Add call to rtc_reset 2023-05-06 03:16:38 -04:00
Kattni
018f15de95
Merge pull request #7938 from jepler/issue5980 
Fix crash with fast ping on espressif
 2023-05-05 18:52:02 -04:00
Jeff Epler
66411fdd38
espressif: check return value from esp_ping_new_session 
esp_ping_new_session can fail, particularly if ping is called quickly
many times in succession.

This is because `esp_ping_new_session` has to do a bunch of stuff
including creating a task and a socket. Calling `esp_ping_delete_session`
doesn't clean up these resources immediately. Instead, it signals the
task to clean up resources and exit 'soon', but 'soon' is defined as 1
second.

When the calls are frequent, the in-use sockets and tasks fill up
available slots—I didn't actually check which resource gets used
up first.

With this change, the ping call will raise an exception instead of
continuing with a call to esp_ping_start that crashes.

Closes #5980 based on my testing on an ESP32S3-N8R2.
 2023-05-05 17:11:03 -05:00
Scott Shawcroft
fa9b59d14c
Merge pull request #7915 from RetiredWizard/picodvi 
Add Pimoroni Pico dv Demo Base (pico only)
 2023-05-04 10:07:48 -07:00
Jeff Epler
eebd4a7f52
synthio: no longer fits on feather m4 can 2023-05-04 10:16:58 -05:00
Jeff Epler
a388a59543
rp2040: fix audio glitch at soft-reload 
The internal flash cache wasn't being properly used, because
`write_blocks` unconditionally performed the flash write.

Fixing this so that the write's not done until `internal_flash_flush`
fixes the problem in my test program with i2sout & synthio.

as a future optimization, `flash_read_blocks` could learn to read out
of the cache, but that's probably not super important.
 2023-05-04 08:41:23 -05:00
Jeff Epler
a7da245ad0
synthio: Add synthio.Note 
This class allows much more expressive sound synthesis:
 * tremolo & vibrato
 * arbitrary frequency
 * different evelope & waveform per note
 * all properties dynamically settable from Python code
 2023-05-04 07:23:49 -05:00
RetiredWizard
4f7d88676b Remove pico-w version 2023-05-03 17:30:01 -04:00
Jeff Epler
bd9aca2526
Merge pull request #7862 from jepler/synthio-envelope 
Synthio envelope
 2023-05-03 12:42:56 -05:00
Liz
480c4f1081
Update pins.c 2023-05-02 17:27:53 -04:00
Liz
facd3a4e78 Updating directory name 2023-05-02 17:07:49 -04:00
Liz
cba7a812fc Minor update for Feather RP2040 ThinkInk 
hihi - updating board name from EPD to ThinkInk and adding pin def for board.BUTTON
 2023-05-02 17:02:59 -04:00
Scott Shawcroft
750615f2da
Merge pull request #7430 from Lanzaa/rp2040_cpu_frequency 
Add frequency setting for RP2040 boards.
 2023-05-02 09:52:28 -07:00
Scott Shawcroft
488dca565f
Merge pull request #7922 from tannewt/dvi320 
Take in framebuffer resolution, not output res
 2023-05-02 09:22:51 -07:00
Jeff Epler
80e1418c01
Merge pull request #7921 from tannewt/imx_evks 
Add additional iMX RT support
 2023-05-02 07:09:50 -05:00
Scott Shawcroft
051540f8da
Fix broadcom NAN 2023-05-01 11:38:13 -07:00
Scott Shawcroft
0aa71ed6e6
Tweak the picodvi docs and arg checking 2023-05-01 11:30:04 -07:00
Scott Shawcroft
b08714bb8f
Take in framebuffer resolution, not output res 
Fixes #7911
 2023-04-28 17:13:17 -07:00
Scott Shawcroft
1a4e1d114c
Merge pull request #7916 from bablokb/badger_2040_w 
Add support for Pimoroni Badger2040W
 2023-04-28 16:42:03 -07:00
Scott Shawcroft
8104b824e0
Standardize CPU temp and voltage. Add autogen warning 2023-04-28 16:19:43 -07:00
RetiredWizard
1fb6d4d77e I2S pin names per Dan's suggestions on iMX PR 2023-04-28 16:58:39 -04:00
Scott Shawcroft
f837f2438a
Update USB PIDs 2023-04-28 11:16:45 -07:00
Scott Shawcroft
a9dc31a881
Add additional iMX RT support 
This adds a script to generate the peripherals files (except clock).

It adds support for the 1015, 1020, 1040, and 1050 EVKs.

Some work was started on 1176 but it isn't working. So, the board
def is in a separate branch.

Fixes #3521. Fixes #2477.
 2023-04-28 11:01:13 -07:00
Bernhard Bablok
14c17224a1 update product-id 2023-04-28 08:57:22 +02:00