Zephyr's default value for CONFIG_NET_SOCKETS_POSIX_NAMES was changed
from false to true between Zephyr v2.5.0 and v2.6.0. This caused
conflicts in MicroPython, which uses the zsock_ prefixed functions, so
disable it.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr's Kconfig symbols and defaults for SDHC/SDMMC disk drivers and
the disk access subsystem were reworked between Zephyr v2.5.0 and
v2.6.0. Update MicroPython accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Following on from ef16834887, this adds a
coverage build and running of the test suite on an ARM 32-bit Linux-based
architecture.
Signed-off-by: Damien George <damien@micropython.org>
Prior to this commit, cache flushing for ARM native code was done only in
the assembler code asm_thumb_end_pass()/asm_arm_end_pass(), at the last
pass of the assembler. But this misses flushing the cache when loading
native code from an .mpy file, ie in persistentcode.c.
The change here makes sure the cache is always flushed/cleaned/invalidated
when assigning native code on ARM architectures.
This problem was found running tests/micropython/import_mpy_native_gc.py on
the mimxrt port.
Signed-off-by: Damien George <damien@micropython.org>
Initial version, using the LP RTC clock. It provides setting the date and
time with rtc.init() or rtc.datetime(), and reading the date and time with
rtc.datetime() or rtc.now(). The method weekday() reports the weekday of
the current date. It starts with 0 for Monday.
The tuple order for datetime() and now() matches the CPython sequence:
(year, month, day, hour, minute, second, microsecond, TZ). TZ is ignored
and reported as None. Microsecond is provided at a best effort.
If a battery is not supplied, the default boot date/time is 1970/1/1 0:0:0.
With a battery, the clock continues to run even when the board is not
powered. The clock is quite precise. If not, using rtc.calibration() may
help.
It supports three hardware timer channels based on the PIT timers of the
MIMXRT MCU. The timer id's are 0, 1 and 2. On soft reboot all active
timers will be stopped via finalisers.
This is required since the Teensy Halfkay loader attempts to erase all of
the flash but fails to do so, at least in my tests. Formatting brings it
back to a known state.
This commit adds full support for a filesystem on all boards, with a block
device object mimxrt.Flash() and uos.VfsLfs2 enabled.
Main changes are:
- Refactoring of linker scripts to accomodate reserved area for VFS. VFS
will take up most of the available flash. 1M is reserved for code. 9K is
reserved for flash configuration, interrupts, etc.
- Addition of _boot.py with filesystem init code, called from main.c.
- Definition of the mimxrt module with a Flash class in modmimxrt.[ch].
- Implementation of a flash driver class in mimxrt_flash.c. All flashing
related functions are stored in ITCM RAM.
- Addition of the uos module with filesystem functions.
- Implementation of uos.urandom() for the sake of completeness of the uos
module.
It uses sample code from CircuitPython supplied under MIT license, which
uses the NXP SDK example code.
Done in collaboration with Philipp Ebensberger aka @alphaFred who
contributed the essential part to enable writing to flash while code is
executing, among other things.
Adds support for NeoPixels on GPIO32 and GPIO33 on ESP32. Otherwise,
NeoPixels wired to GPIO32/33 wll silently fail without any hints to the
user.
With thanks to @robert-hh.
Fixes issue #7221.
ATOM is a very small ESP32 development board produced by M5Stack, with a
size of 24mm * 24mm, with peripherals such as WS2812, IR, button, MPU6886
(Only Matrix), and 8 GPIO extensions. It also has a plastic shell.
The random module's getrandbits() method didn't give a proper error message
when calling it with a value that was outside of the range of 1-32, which
can lead to confusion using this function (which under CPython can accept
numbers larger than 32). Now instead of simply giving a ValueError it
gives an error message that states that the number of bits is constrained.
Also, since the random module's functions getrandbits() and randint()
differ from CPython, tests have been added to describe these differences.
For getrandbits the relevant documentation is shown and added to the docs.
The same is given for randint method so that the information is more easily
found.
Finally, since the int object lacks the bit_length() method there is a test
for that method also to include within the docs, showing the difference to
CPython.
asan considers that memcmp(p, q, N) is permitted to access N bytes at each
of p and q, even for values of p and q that have a difference earlier.
Accessing additional values is frequently done in practice, reading 4 or
more bytes from each input at a time for efficiency, so when completing
"non_exist<TAB>" in the repl, this causes a diagnostic:
==16938==ERROR: AddressSanitizer: global-buffer-overflow on
address 0x555555cd8dc8 at pc 0x7ffff726457b bp 0x7fffffffda20 sp 0x7fff
READ of size 9 at 0x555555cd8dc8 thread T0
#0 0x7ffff726457a (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xb857a)
#1 0x555555b0e82a in mp_repl_autocomplete ../../py/repl.c:301
#2 0x555555c89585 in readline_process_char ../../lib/mp-readline/re
#3 0x555555c8ac6e in readline ../../lib/mp-readline/readline.c:513
#4 0x555555b8dcbd in do_repl /home/jepler/src/micropython/ports/uni
#5 0x555555b90859 in main_ /home/jepler/src/micropython/ports/unix/
#6 0x555555b90a3a in main /home/jepler/src/micropython/ports/unix/m
#7 0x7ffff619a09a in __libc_start_main ../csu/libc-start.c:308
#8 0x55555595fd69 in _start (/home/jepler/src/micropython/ports/uni
0x555555cd8dc8 is located 0 bytes to the right of global variable
'import_str' defined in '../../py/repl.c:285:23' (0x555555cd8dc0) of
size 8
'import_str' is ascii string 'import '
Signed-off-by: Jeff Epler <jepler@gmail.com>
With GCC 11 there is now a warning about array bounds of OTP-mac, due to
the OTP being a literal address.
Signed-off-by: Damien George <damien@micropython.org>
If digest is called then the hash object is put in a "final" state and
calling update() or digest() again will raise a ValueError (instead of
silently producing the wrong result).
See issue #4119.
Signed-off-by: Damien George <damien@micropython.org>
The 512k build does not have a filesystem so there is no reason to include
the filesystem-related modules. This commit provides a custom manifest.py
for this board which no longer includes: _boot.py, flashbdev.py,
inisetup.py, upip.py, upip_utarfile.py. This cuts the build down by about
9k of flash.
Signed-off-by: Damien George <damien@micropython.org>
This adds a coverage build and running of the test suite on a MIPS 32-bit
big endian architecture. It uses the feature of qemu to execute foreign
code as though it were native to the system (using qemu user mode). The
code compiled for MIPS will run under the qemu VM, but all syscalls made by
this code go to the host (Linux) system.
See related #7268 and #7273.
Signed-off-by: Damien George <damien@micropython.org>
