40e833c746
[Fix] Wrong fix of cache use for STM32
2023-08-02 20:13:52 +02:00
9cc4b4cd37
Merge pull request #8245 from jepler/esp32-camera-backlight-solarize
...
pycamera: backlight, solarize
2023-08-02 10:00:21 -07:00
f7cc20e936
Update pins.c
2023-08-02 11:01:44 -04:00
f9b98ce54d
Update pins.c
2023-08-02 10:57:46 -04:00
b88e359b00
Update pins.c
2023-08-02 10:41:46 -04:00
37dbe3e24a
Update pins.c
2023-08-02 10:32:40 -04:00
94ed725fd3
Update mpconfigboard.h
2023-08-02 10:24:58 -04:00
4e01e6bbe5
adafruit-esp32s3-camera: set up backlight at boot & add solarize
...
the backlight situation will be revisited with the next board prototype,
but it's good to prove this can be done.
Depends on https://github.com/adafruit/esp32-camera/pull/6 which should
be merged before this.
2023-08-02 08:09:13 -05:00
2b0f1cd087
espressif: fix dependencies in esp-idf modules
...
while developing esp-camera I had the problem that firmware.elf was
not regenerated if the only file I edited was in the esp32-camera
submodule.
By telling make that $(IDF_CMAKE_TARGETS), the list of .a fliles
produced by ninja-building esp-idf, depend on esp-idf-stamp and that
firmware.elf in turn depends on these files, the ninja build is re-run
on each make, which is reasonably quick if nothing needs to be rebuilt.
2023-08-02 07:52:45 -05:00
8baff0bf88
Merge pull request #8133 from dronecz/main
...
Add ES3ink board definition
2023-08-01 13:31:46 -07:00
0bf50d2d6e
Merge pull request #8215 from makermelissa/adafruit-metro-esp32s3
...
Added initial Adafruit Metro ESP32-S3
2023-08-01 13:30:06 -07:00
539f34f7fd
Three small changes
...
1. Raise an exception when creating a USB device when host isn't
initialized.
2. Mark RP2040 dtcm_bss as NOLOAD since it doesn't need to be
loaded (just zeroed.)
3. Fix submodule location for ulab to Jeff's copy.
2023-08-01 13:16:38 -07:00
0d4bc8c163
initial v1.19.1 merge; not compiled yet
2023-08-01 13:50:05 -04:00
cfbfd53b00
Merge pull request #8235 from elpekenin/fix/stm32-cache-skip
...
Redo of #8228
2023-08-01 10:16:24 -07:00
aecaab779b
Merge pull request #8241 from MakerClassCZ/picopad-rgb-fix
...
Fix RGB/BGR color order for Picopad
2023-08-01 09:55:36 -07:00
272a2dcdb0
Merge pull request #8218 from jepler/esp32-camera
...
Update the camera board to use ESP32-S3 microcontroller
2023-07-31 14:48:50 -05:00
a9c828011a
Fix RGB/BGR color order
2023-07-31 12:22:27 +02:00
d5daa7ad27
boards/beetle-esp32-c3: fix sdkconfig minor typo.
...
Fixes https://github.com/adafruit/circuitpython/issues/8239
2023-07-30 22:13:10 -07:00
1ece85ee1e
Fix logic (i think)
2023-07-28 23:49:45 +02:00
e931a526f1
Merge branch 'main' of https://github.com/adafruit/circuitpython into arduino-nano-esp32s3
2023-07-27 19:27:16 -07:00
45b1c42be5
Add D0 and D1
2023-07-27 19:26:37 -07:00
6083de017a
fix method name in docstr
2023-07-27 20:09:13 -05:00
f466a4373e
Merge pull request #8222 from tannewt/fat_window_align
...
Align fatfs window buffer for tinyusb
2023-07-27 20:35:23 -04:00
ffb1cf116d
Add D pins
2023-07-27 16:46:15 -07:00
3d210bfa45
Merge branch 'main' of https://github.com/adafruit/circuitpython into adafruit-metro-esp32s3
2023-07-27 16:33:19 -07:00
92e2134009
rp2: StateMachine: Allow loading programs at fixed offsets
2023-07-27 15:47:04 -05:00
5780d9a3d2
rp2: Add StateMachine.may_exec
...
and also sanity-check the init instructions, thanks to the newly
factored-out checker.
Closes : #8221
2023-07-27 15:47:01 -05:00
e45a61f57e
Align fatfs window buffer for tinyusb
...
Also, update tinyusb.
2023-07-27 09:15:58 -07:00
020e4d2e0c
update camera submodule
2023-07-26 12:55:44 -05:00
5cc42d5041
Merge pull request #8126 from jepler/update-ulab-6.3.2
...
update ulab to 6.3.2
2023-07-26 11:54:42 -04:00
fd83a09078
Merge pull request #8214 from MakerClassCZ/picopad
...
Add PicoPad support
2023-07-26 11:49:46 -04:00
46d7771152
tinyuf2 adopted the partition scheme called "1ota"
...
.. which irritated our partition table parser in build_memory_info, so
make it work again.
2023-07-26 09:41:10 -05:00
c516870f89
switch camera to use the no-ota partition scheme
...
this gives us a comfortable few hundred kB flash space left for the app
1398912 bytes used, 763776 bytes free in flash firmware space out of 2162688 bytes (2112.0kB).
2023-07-26 08:38:59 -05:00
9edd8957a1
Add a "4MB without OTA" partition scheme
...
This is needed on the camera board, because we have a lot of code.
2023-07-26 08:38:30 -05:00
f503b37b2b
espressif: allow setting FLASH_SDKCONFIG at board level
2023-07-26 08:32:25 -05:00
9a18524c30
simplify circuitpy_mpconfig with enable-if-any, -all
...
and make corresponding simplifications in shared-bindings-matrix,
but directly using the final defines from CFLAGS instead of the
status quo.
The net changes are to disable audiocore & audiomixer on some espressif
devices that have no audio output at all. Other than that, the
shared-bindings-matrix seems to be identical.
2023-07-25 19:56:08 -05:00
6030d87025
Change to octal ram
2023-07-25 16:30:21 -07:00
fd60cccb06
Re-enable ulab at the expense of some other modules
...
.. and gate audiomixer based on audiocore (should be no net change)
.. and get rid of now-redundant enables in the espressif mpconfigport
2023-07-25 16:01:11 -05:00
45b6c84cdd
Merge branch 'main' of github.com:ladyada/circuitpython
2023-07-25 16:13:47 -04:00
767b7a0506
compiling
2023-07-25 16:12:53 -04:00
1303fe5378
Merge branch 'adafruit:main' into main
2023-07-25 16:10:42 -04:00
318191433d
disable gifio on feather_m4_can
2023-07-25 14:03:47 -05:00
58d6c3ac9d
Formatting
2023-07-25 19:25:27 +02:00
6a5e4e6652
turn off terminalio in a few more builds for space
2023-07-25 11:19:16 -05:00
509ddf2f89
samd: disable some modules so updated ulab fits
...
* floppyio: disable on itsybitsy m4, metro m4 express & airlift, pybadge, pygamer, wio terminal
* gifio: disable on itsybitsy m4 express
* framebufferio: disable on treills m4 express, wio terminal
* terminalio: disable on metro m4 express/airlift for ja/ko/ru
2023-07-25 10:48:35 -05:00
adc2dab3a9
disable ulab on pyb_nano_v2
2023-07-25 09:35:55 -05:00
8579766ede
Optimize ulab for size on samd51/same51
2023-07-25 09:35:49 -05:00
c781204105
Add PicoPad support
2023-07-25 14:40:53 +02:00
ae0ebfef2f
ESP32 synthio channels to 12
2023-07-24 23:03:34 -04:00
8f1ebdbd10
Added initial Adafruit Metro ESP32-S3
2023-07-24 18:41:52 -07:00
2d53627796
Merge pull request #8189 from todbot/esp32_synthio_channels
...
ESP32 synthio channels to 12
2023-07-24 21:39:00 -04:00
cd96198242
Ran pre-commit
2023-07-24 15:18:07 -07:00
f26d92fdb8
Add inverted board and fix pins
2023-07-24 15:11:22 -07:00
7f8f1b37fd
Fix pin names
2023-07-24 10:47:37 -07:00
fff309b90a
Merge pull request #8164 from madcitygeek/add_luatos_core_esp32c3_ch343
...
Add luatos core esp32c3 ch343
2023-07-24 10:17:03 -07:00
c22a31e023
Merge pull request #8194 from dhalbert/8.2.x-backport-8035-8181-metro-rp2040
...
8.2.x backport 8035 8181 metro rp2040
2023-07-24 10:10:53 -07:00
70d7b6ffb7
Merge pull request #8196 from dhalbert/8.2.x-backport-8127-metro-m1011-sd
...
8.2.x backport: add Adafruit Metro M7 1011 SD
2023-07-24 10:10:15 -07:00
03c1cde918
Merge pull request #8204 from dhalbert/8.2.x-backport-8156-datanoise-picoadk
...
8.2.x backport 8156 datanoise picoadk
2023-07-24 10:07:32 -07:00
2a99ec3fc3
Merge pull request #8203 from dhalbert/8.2.x-backport-8154-keebs-frood
...
8.2.x backport: Update 42. Keebs Frood support for Rev7
2023-07-24 09:49:38 -07:00
818bd8f043
Merge pull request #8202 from dhalbert/8.2.x-backport-8152-liatris-board
...
8.2.x backport 8152 liatris board
2023-07-24 09:49:11 -07:00
f902e0d86b
Merge pull request #8201 from dhalbert/8.2.x-backport-8150-set-hostname
...
8.2.x backport: fix set hostname
2023-07-24 09:48:33 -07:00
99347aee1e
Merge pull request #8200 from dhalbert/8.2.x-backport-8142-makerdiary-nrf52840-connect
...
8.2.x backport: Added Makerdiary nRF52840 Connect Kit.
2023-07-24 09:48:11 -07:00
eebff5cb77
Merge pull request #8198 from dhalbert/8.2.x-backport-8130-qtpy-esp32s3-m4r2
...
8.2.x backport: adafruit_qtpy_esp32s3_4mbflash_2mbpsram
2023-07-24 09:47:47 -07:00
b901063eea
Merge pull request #8197 from dhalbert/8.2.x-backport-8129-s3-box-psram
...
8.2.x backport: Fix PSRAM on espressif ESP32S3 box and box lite
2023-07-24 09:46:42 -07:00
66a76d034e
Merge pull request #8187 from tannewt/three_small
...
Three small changes
2023-07-24 12:42:38 -04:00
a134eebefb
Merge branch 'main' of https://github.com/adafruit/circuitpython into arduino-nano-esp32s3
2023-07-24 08:47:15 -07:00
d84c69c056
Add NeoPixel Library for Datanoise PicoADK.
2023-07-23 12:14:13 -04:00
a4b4f57ff1
Add Datanoise PicoADK
2023-07-23 12:07:30 -04:00
b87ceb26aa
Add Datanoise PicoADK
2023-07-23 12:07:30 -04:00
df821bf22c
Update 42. Keebs Frood support for Rev7
2023-07-23 11:59:49 -04:00
317cab87a7
Add new board: splitkb.com's Liatris
2023-07-23 11:57:44 -04:00
b6d4488b31
fix set hostname
2023-07-23 11:56:05 -04:00
4dc9b0dde7
Added Makerdiary nRF52840 Connect Kit.
...
Signed-off-by: Zelin Cai <zelin@makerdiary.com>
2023-07-23 10:52:28 -04:00
97a8d71356
Swapped address pins for Rev C
2023-07-23 10:50:07 -04:00
66d0d95f23
adafruit_qtpy_esp32s3_4mbflash_2mbpsram
2023-07-23 10:47:37 -04:00
31aa9b2bb0
Fix PSRAM on espressif ESP32S3 box and box lite
2023-07-23 10:22:45 -04:00
311f6b0c79
add Adafruit Metro M7 1011 SD
2023-07-23 10:19:42 -04:00
9a9fe1240d
update metro rp2040 to work with 16MB flash
2023-07-23 10:05:54 -04:00
391bb1c45f
Add Adafruit Metro RP2040
2023-07-23 10:00:56 -04:00
688f62a927
Merge pull request #8174 from UnexpectedCircuitPython/main
...
Added second I2C bus and IO for UM FeatherS3
2023-07-23 00:07:42 -04:00
4bc12d9fb0
Update pins.c
...
Changed naming of the second I2C board reference to match how others name things.
2023-07-23 13:39:53 +10:00
e47e7bcdde
Ran pre-commit
2023-07-21 14:50:24 -07:00
ed2e30b4d1
Added Arduino Nano ESP32-S3
2023-07-21 13:07:05 -07:00
a5fc766b2f
ESP32 synthio channels to 12
2023-07-21 10:06:17 -07:00
924422eff8
Merge remote-tracking branch 'adafruit/main' into three_small
2023-07-21 09:37:26 -07:00
525dad71c3
Add RuntimeError_varg and fix imx capitalization
2023-07-20 16:00:43 -07:00
70cf0610cc
disable synthio on this board, it's very full
2023-07-20 14:18:03 -05:00
a56e97db1d
Align MP heap allocations to cache lines
2023-07-20 11:20:32 -07:00
5f082561b3
Unify some error strings
2023-07-20 11:20:32 -07:00
305303996d
Merge pull request #8182 from tannewt/usb_host_singleton
...
Make usb_host.Port a singleton
2023-07-19 15:04:19 -07:00
e81ed62cfd
Add missing header file
2023-07-19 11:46:04 -07:00
12d1181c64
Merge pull request #8183 from Qyriad/features/samx5x-external-clock
...
samx5x: support external clock sources
2023-07-19 09:59:27 -07:00
3f3ec1c835
samx5x: support external clock sources
...
Adds two board config define's, which can be added in a board's
mpconfigboard.h: BOARD_XOSC_FREQ_HZ, and BOARD_XOSC_IS_CRYSTAL, which
are passed to clock_init(). External clock sources are currently only
implemented for SAM_D5X_E5X series chips, so defining BOARD_XOSC_FREQ_HZ
for a SAMD21 board will emit an error.
Signed-off-by: Qyriad <qyriad@qyriad.me>
2023-07-18 17:12:58 -06:00
1629faf8b3
Make usb_host.Port a singleton
...
This allows you to initialize usb_host.Port once successfully and
then returns the same object as long as you pass the same arguments
in. It does allow you to fix incorrect pins but not switching from
one valid set to another. (It needs a reset for that.)
This also moves hcd cache operations to RAM so that they don't
access the cache when doing maintenance.
2023-07-18 10:40:54 -07:00
dd266f2622
renamed since we are now s3
2023-07-18 01:02:38 -04:00
4f09078293
update metro rp2040 to work with 16MB flash
2023-07-17 12:56:55 -05:00
9642e38783
Added second I2C B\bus IO and stuff for FeatherS3
2023-07-15 08:52:57 +10:00
4e01674cbd
Fix rp2 safe mode via reset press
...
The picodvi PR #7880 switched the saved word to the watchdog
register since it reworked the RAM layout. This works for
reset_into_safe_mode because the watchdog scratch registers are
preserved by soft resets. They *aren't* preserved for pressing the
reset button. So it broken manual safe mode. Switch back to using
RAM to store the saved word but use the pico-sdks "uninitialized"
designation instead of a fixed location.
Also fixes USB host feather status neopixel by setting the power
pin.
2023-07-13 14:49:08 -07:00
3ac84281bf
Add NeoPixel Library for Datanoise PicoADK.
2023-07-13 12:04:27 +02:00
a7bbb05e25
Update mpconfigboard.mk
...
Use unique CIRCUITPY_CREATION_ID
2023-07-12 22:59:43 -05:00
2742466709
Merge branch 'adafruit:main' into add_luatos_core_esp32c3_ch343
2023-07-12 22:29:47 -05:00
6b5cf5537a
Merge pull request #8035 from dhalbert/metro-rp2040
...
Add Adafruit Metro RP2040
2023-07-12 10:40:37 -05:00
8d6ef37a7c
Update pins.c
...
Fix pre-commit error
2023-07-11 23:12:46 +02:00
2746709dfc
Update pins.c
...
Add EPD pins definition
2023-07-11 22:58:12 +02:00
812df860cc
Merge branch 'adafruit:main' into main
2023-07-11 22:54:01 +02:00
5e97ff80f2
Added a varient of the luatos board with on-board ch343
2023-07-11 14:56:10 -05:00
346ec8d4a8
Merge pull request #8156 from DatanoiseTV/datanoise_picoadk
...
Add Datanoise PicoADK Board
2023-07-11 11:01:28 -07:00
5a7a7e221d
Merge pull request #8130 from dhalbert/adafruit_qtpy_esp32s3_4mbflash_2mbpsram
...
Add adafruit_qtpy_esp32s3_4mbflash_2mbpsram; remove frozen libs from qtpy_esp32s3_nopsram
2023-07-11 13:05:19 -04:00
7764cde6c2
Merge pull request #8155 from tannewt/imx_usb_host
...
Basic USB host support and keyboard workflow
2023-07-11 09:50:09 -07:00
9b80943885
Add Datanoise PicoADK
2023-07-11 10:01:46 +02:00
449416f5e1
Add Datanoise PicoADK
2023-07-11 09:52:47 +02:00
52ca0504d9
Comment out debug UART on RP2040 USB host feather
2023-07-10 15:37:57 -07:00
ae84441575
Update 42. Keebs Frood support for Rev7
2023-07-10 23:32:02 +02:00
2686beab36
Basic USB host support and keyboard workflow
...
Connects up read, write and ctrl_transfer to TinyUSB. USB Host
support is available on iMX RT and RP2040.
Fixes #6527 (imx) and fixes #5986 (rp2).
2023-07-10 14:22:21 -07:00
9f3f2aabff
Merge pull request #8152 from splitkb/liatris
...
Add new board: splitkb.com's Liatris
2023-07-10 12:07:27 -07:00
164fcb22c2
Enable "from __future__ import annotations" on unix build
2023-07-10 13:53:26 -05:00
036eca8123
Add new board: splitkb.com's Liatris
2023-07-10 14:45:08 +02:00
8704ba158b
fix set hostname
2023-07-09 21:25:37 +05:30
4caccfdf8d
Merge branch 'adafruit:main' into main
2023-07-07 11:48:38 +02:00
8991f0cd7a
Update ES3ink board definition
...
- fix wrong VID
- add NEOPIXEL definition
- add DOUBLE_TAP_PIN definition
- add definition for default SPI bus
2023-07-07 11:48:03 +02:00
5fedf02806
Added Makerdiary nRF52840 Connect Kit.
...
Signed-off-by: Zelin Cai <zelin@makerdiary.com>
2023-07-07 15:11:12 +08:00
fad86bfb27
Merge pull request #8129 from Neradoc/fix-psram-on-esp32s3-box
...
Fix PSRAM on espressif ESP32S3 box and box lite
2023-07-05 14:16:17 -07:00
5dc7e9472b
Swapped address pins for Rev C
2023-07-03 12:08:10 -07:00
1787e76389
Add ES3ink board definition
2023-06-30 11:01:00 +02:00
2a8d6d655c
adafruit_qtpy_esp32s3_4mbflash_2mbpsram
2023-06-28 22:59:00 -04:00
f1d9ee0de3
Fix PSRAM on espressif ESP32S3 box and box lite
2023-06-28 19:26:08 +02:00
ce3df829e1
Merge pull request #8118 from n0xa/M5StickCPlus
...
Adding support for M5Stack Stick C Plus
2023-06-28 09:08:02 -07:00
77b3a0570e
add Adafruit Metro M7 1011 SD
2023-06-27 19:11:25 -04:00
5dc2b168d7
Merge pull request #8123 from jepler/issue8121-workaround
...
rp2040: Avoid screeches due to audio underflow during flash writes
2023-06-27 09:09:03 -07:00
385366128f
Don't use "cookie" variable/function name
2023-06-27 09:59:02 -05:00
b4be2317cb
rp2040: Avoid screeches due to audio underflow during flash writes
...
By pausing audio during flash writes, the worst screeching of #8121
is avoided. I don't consider this a full fix, but it greatly improves
the by far most common scenario in which the problem occurs.
Tested on rp2040 prop feather with a midi synth playing arpeggios. When
writing to the flash e.g., with
```
dd bs=512 count=32 if=/dev/zero of=/media/jepler/CIRCUITPY/boop
```
the audio goes "tap tap tap tap" during the flash write instead of the
squawking.
This isn't a 100% fix; it will still glitch out, including during USB
enumeration which must be taking a long time without servicing background
tasks. Add a delay if not usb-connected at startup ameliorates this
greatly.
2023-06-26 10:34:29 -05:00
232e096f93
fix board.BUTTON on espressif_esp32c3_devkitm_1_n4
2023-06-25 17:05:49 +02:00
75dbb7d102
Added a new creation ID for this board
2023-06-25 07:29:18 -05:00
6bdfed2bb0
Adding support for M5Stack Stick C Plus
2023-06-25 07:08:59 -05:00
fde6342705
Revert "nrf: prevent I2C hangs"
2023-06-23 13:20:41 -04:00
ffebb5af8a
Merge pull request #8094 from furbrain/fix_i2c_hangs
...
Fix for #8093
2023-06-23 13:12:24 -04:00
540bf58102
improve start_ap() doc; make "authmode" use consistent internally
2023-06-22 16:24:18 -04:00
28b0e34d76
Merge pull request #8099 from strid3r21/main
...
added bee data logger
2023-06-21 09:52:26 -07:00
60adfa4e6b
Merge pull request #8089 from furbrain/main
...
Reset UART on deinit, reduces power consumption on nRF
2023-06-20 19:48:37 -04:00
9a2e9f7e41
added bee data logger
2023-06-20 18:50:15 -04:00
112f0fd767
Add `-Wno-undef` to rp2 makefile for sdk
2023-06-21 01:43:10 +03:00
e139cd9ec0
Update cyw43 to 1.0.1
2023-06-21 01:35:52 +03:00
a753490899
Refactor out test for bus sanity state
2023-06-20 23:32:00 +01:00
9bce4ac30c
Merge pull request #8090 from kamtom480/sdk3.0.1
...
spresense: update SDK to 3.0.1
2023-06-20 13:11:45 -07:00
028a81922b
Remove unneeded #define from I2C.c
2023-06-20 13:36:12 +01:00
fae14cc55b
Fix for #8093
...
This adds a check to make sure that SDA and SCL are in a sane condition
before starting any I2C operation. If they are not it tries to rectify it,
and then returns an error code if unable to do so.
2023-06-19 22:20:46 +01:00
0aa7854d5b
Update pico-sdk to 1.5.1
2023-06-19 18:00:49 +03:00
4bb475b930
formatting
2023-06-17 22:49:47 +01:00
ec1e7a03b3
Reset UART on deinit, reduces power consumption
2023-06-17 22:42:12 +01:00
7354e2ad03
fix `invalid pin` error when create `busio.SPI`
...
on specific SCK/MOSI/MISO pins, the `common_hal_busio_spi_construct`
method always skip miso pins which will lead to a `invalid pin`
exception when SPI initilized
2023-06-15 07:48:19 +08:00
979f2f5ef3
spresense: update SDK to 3.0.1
2023-06-14 12:30:39 +02:00
666fb94ca3
Merge pull request #8056 from jepler/matrixportal-s3
...
Add Adafruit MatrixPortal S3 board def & update protomatter
2023-06-13 19:34:08 -05:00
46de2cb682
Add buttons and accelerometer interrupt
2023-06-13 07:59:33 -07:00
a5e3c6ee82
Merge pull request #8077 from jepler/nrf-synthio
...
nrf52840: allow 12 voices
2023-06-12 12:44:08 -07:00
14af662ab9
Added support for Unexpected Maker NANOS3
2023-06-12 20:32:46 +10:00
d5a2293784
nrf52840: allow 12 voices
...
In my testing, the feather bluefruit can do 12 voices at 48kHz!
This is a simple case (no LFOs, no ring modulation) so other situations might
require a lower sample rate, fewer voices, or both.
The sound is a little artifacty & low-fi but I think that's down to the speaker
& use of PWM instead of I2S.
2023-06-09 11:30:12 -05:00
4d5caff0ed
fix missing newline
2023-06-08 13:02:24 -04:00
46ddacddde
Merge branch 'main' into efr32-doc-fixes
2023-06-08 12:57:09 -04:00
6cf7e45f10
Merge pull request #8037 from jpconstantineau/fix-PCA10100
...
fix to make buttons and leds compatible with pca10056
2023-06-08 12:56:09 -04:00
1e3f1d745a
Update badger2040 start sequence for more contrast
...
This change is taken from the pico-sdk: https://github.com/pimoroni/pimoroni-pico/blob/main/drivers/uc8151_legacy/uc8151_legacy.cpp#L67-L120 and increases the contrast of pictures sent dramatically. It comes with the expense of using way more time when updating though.
2023-06-08 18:25:45 +02:00
d4913b04e0
rgbmatrix: update protomatter
...
and re-organize so that esp32 s2/s3 don't do as much at reset
.. it's not necessary (because most data is in esp-idf managed memory)
and doing this saves me from having to debug why reconstruct isn't working
properly on that platform.
This needs to be tested on other platforms again before being merged!
2023-06-08 10:43:32 -05:00
c408193ffe
Merge pull request #8048 from jepler/synthio-biquad
...
Synthio: switch to per-note biquad filtering
2023-06-07 14:48:31 -05:00
40a31390aa
Remove available modules section
2023-06-07 07:30:02 +12:00
e631350b9b
Merge pull request #8070 from dhalbert/port-specific-submodules
...
Provide port-specific fetch of submodules
2023-06-06 14:46:39 -04:00
38f6fa27e3
fetch-port-submodules; fetch-all-submodules
2023-06-05 17:23:34 -04:00
2d78cf3428
Merge branch 'adafruit:main' into efr32-doc-fixes
2023-06-06 08:56:40 +12:00
ce84ecf3f6
Fix flash size
2023-06-01 18:57:18 -05:00
2fb42579e8
Add minimally tested Adafruit MatrixPortal S3 board def
...
tested:
* board.LED
* neopixel as status LED
* i2c scan finds lis3dh sensor
* psram capacity
not tested:
* rgb matrix o_O
* the gpio pins
Introduce new `board` properties for matrixportal-style boards:
* MTX_COMMON
* MTX_ADDRESS
These are intended to simplify use of the RGBMatrix constructor:
```py
matrix = RGBMatrix(..., addr_pins=MTX_ADDRESS[:3], **MTX_COMMON)
```
removing the need for sending in the following individual parameters:
* rgb_pins
* clock_pin
* latch_pin
* output_enable_pins
and making construction of a 16/32/64-row display easy by slicing a tuple
of all address pins rather than writing out the individual pins. If it
works out it'll be ported back to the matrixportal m4 as well.
2023-06-01 17:23:34 -05:00
6fd700eb11
added HW_LED_STATUS as requested
2023-06-01 10:56:43 -06:00
f2f19e93ec
Fix listing
2023-06-01 09:47:30 -07:00
31f2faa977
SAM E54 Xplained Pro: add support for SST26VF064B flash chip
2023-06-01 08:36:25 +03:00
fed8d5825b
synthio: add biquad filter type & basic filter calculations
...
the filter cannot be applied as yet.
2023-05-29 09:50:18 -05:00
d73f390a4d
M60 keyboard: allow run on battery
...
This also expose the battery control pin as BATTERY_ENABLE,
so users can fully power off the keyboard.
2023-05-28 12:11:34 +08:00
60935c29eb
Fix up EFR32 port readme
2023-05-28 16:01:59 +12:00
60ce38ed8b
fix trailing space of pins.c
2023-05-26 13:30:32 -06:00
325037b75e
fix to make buttons and leds compatible with pca10056
2023-05-26 13:17:05 -06:00
3a893594b2
Add Adafruit Metro RP2040
2023-05-26 12:42:23 -04:00
ff2003145f
Merge pull request #8025 from tkroo/patch-1
...
update spi pins to match schematic
2023-05-23 23:11:16 -04:00
b9bb966835
Merge pull request #8026 from phamhuyvn/patch-1
...
Update pins.c
2023-05-23 23:10:45 -04:00
713d86f42b
Merge pull request #8021 from SiliconLabs/dev
...
Silabs fixes, BLE bonding and peripheral changes
2023-05-23 23:10:19 -04:00
2d7fa6dd8a
Update pins.c
...
Fixed Button_R from GPIO6 to GPIO7
Fixed LCD_BACKLIGHT from GPIO29 to GPIO26
2023-05-24 08:44:57 +07:00
d570b8b4ef
update spi pins to match schematic
2023-05-23 17:42:36 -07:00
72b1bc890f
Update spi pins in mpconfigboard.h
2023-05-23 17:27:53 -07:00
3f845fe8fd
board files for lolin-s3-mini
2023-05-23 14:24:28 -07:00
b26e4ca0ae
Merge pull request #7985 from jepler/synthio-lfo-dag
...
synthio: Add LFOs
2023-05-23 15:48:11 -04:00
2422179419
Merge pull request #8014 from tkroo/lolin-c3-pico
...
Board files for LOLIN C3 PICO
2023-05-23 15:02:20 -04:00
596773286d
Merge pull request #8016 from charlieh0tel/new-mimxrt1060-evkb-board
...
Adds MIMXRT1060-EVKB as new board.
2023-05-23 11:11:32 -07:00
49b1368d65
Changed PID to 0x813C.
2023-05-22 20:06:50 -07:00
a163273ee0
Update ports/espressif/boards/lolin_c3_pico/mpconfigboard.h
...
update board I2C pins.
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2023-05-22 19:00:16 -07:00
9040ac8bc6
Merge pull request #8003 from dhalbert/esp-touch-alarm-fix
...
Esp touch alarm fix
2023-05-22 13:43:54 -07:00
a5df186fa7
change copyright notice
2023-05-22 13:30:36 -07:00
3f7e6db4fa
Merge pull request #8015 from dhalbert/rp2040-sleep-memory
...
RP2040 SleepMemory
2023-05-22 13:08:37 -07:00
7048ce46b1
match pins to what wemos uses
2023-05-22 10:06:50 -07:00
393c0bb1f6
move sck, scl, and sda pin assignments
2023-05-21 23:27:58 -07:00
73299ae48c
Adds new board for MIMRT1060-EVKB (not to be confused with MIMRT1060-EVK).
2023-05-21 17:42:30 -07:00
955d2723d0
RP2040 SleepMemory
2023-05-21 19:05:25 -04:00
0a1b2f8771
include neopixel lib
2023-05-21 14:30:51 -07:00
a64d66846b
remove leftover files
2023-05-21 12:45:23 -07:00
ebd7e29b98
create files
2023-05-21 11:35:11 -07:00
612dbc0500
update board name
2023-05-21 11:34:54 -07:00
elpekenin
Scott Shawcroft
Jeremy Littler
Jeff Epler
Dan Halbert
Vladimír Smitka
KB Sriram
Melissa LeBlanc-Williams
Dan Halbert
ladyada
Limor "Ladyada" Fried
Tod Kurt
Sylwester
Petr Sedlacek
Leah Post
MicroDev
Zelin Cai
Neradoc
Unexpected Maker
Qyriad
madcitygeek
Miroslav Zuzelka
Noah Axon
paul
Bill Sideris
Phil Underwood
leosun
Kamil Tomaszewski
Mario Bodemann
applecuckoo
applecuckoo
Pierre Constantineau
tomiahola
hyx0329
phamhuyvn
David Sullivan
David Sullivan
Christopher Hoover