all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448.
shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes#462.
The example code for the gamepad module would skip detected
button presses in the code that waits for a button to be released,
because it would run it even when no button is pressed.
Also updated the example pin names to not use RX and TX.
shared-bindings/index.rst: added `aduiobusio` to Support Matrix. Used `audiobusio/_init_.c` to verify applicable ports; SAMD21 was the only one listed...ESP8266 wasn't. This fixes issue #448.
/docs/design_guide: added links to firmware build learning guides for SAMD21 & ESP8266. Changes were placed in the "Adding native modules" section, since that seemed to me the best place based on target audience.
Updated documentation for `delay()` which fixes#243.
Changes:
* New faster filter loop, by @ladyada. New filter coefficients as well.
* Turn on microphone clock when PDMIn object is created, and run it all the time, so the user code doesn't have to wait for microphone startup, which can be 10ms or even 100ms.
* Wait for microphone startup when PDMIn is first created, based on new optional parameter microphone_startup in seconds (takes a float).
* record() returns number of samples actually recorded, so you can see if it's not keeping up.
* Fix buffer overflow errors when buffer size was not a multiple of 16 or something like that.
* Tweak a few peripheral settings.
* Minimum sampling frequency is now 16kHZ or so, because 8kHz runs microphone at only 0.5MHz, which is too slow for many mics.
Note: I tried 128x oversampling instead of 64x, but the code cannot keep up at 24kHz or above sampling. 128x would reduce the high-frequency noise by 6db.
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5
Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
This is a C module with some low-level functions required for the
CircuitPython "stage" library. It provides support for fast
rendering of tile grids and sprites on SPI-based RGB displays.
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.
simpler reset of SERCOMs; remove unused routine
This is mostly for convenience, so that user code doesn't
need to add additional checks.
Also, bring the bitbangio into compatibility with busio wrt. empty
buffers.
The readonly arg to storage.remount() is now a keyword arg that
defaults to False. To maintain backwards compatibility, readonly
can be passed as a positional arg or keyword arg.
* Add microcontroller.cpu, the sole instance of microcontroller.Processor.
microcontroller.cpu.frequency is the clock frequency, in Hz.
microcontroller.cpu.temperature is the reading from the internal temperature sensor, in Celsius. None if not available.
* Squeeze firmware size by using -finline-limit. Otherwise non-Express builds were slightly too big.
* Update submodules.
* Fix documentation glitches
* atmel-samd: Introduce a nvm module for non-volatile byte-level memory access.
This allows for persisting small configuration values even when the file system
is read-only from CircuitPython.
Fixes#160
* Review feedback:
* Add tests.
* Fix non-zero index.
* Fix len()
also initializes in the same way where it takes from a true random
source when available through os.urandom(). After initializing, it
produces deterministic results until the seed is set.
This replaces urandom!
Fixes#139.
Fixes for stmhal USB mass storage, lwIP bindings and VFS regressions
This release provides an important fix for the USB mass storage device in
the stmhal port by implementing the SCSI SYNCHRONIZE_CACHE command, which
is now require by some Operating Systems. There are also fixes for the
lwIP bindings to improve non-blocking sockets and error codes. The VFS has
some regressions fixed including the ability to statvfs the root.
All changes are listed below.
py core:
- modbuiltins: add core-provided version of input() function
- objstr: catch case of negative "maxsplit" arg to str.rsplit()
- persistentcode: allow to compile with complex numbers disabled
- objstr: allow to compile with obj-repr D, and unicode disabled
- modsys: allow to compile with obj-repr D and PY_ATTRTUPLE disabled
- provide mp_decode_uint_skip() to help reduce stack usage
- makeqstrdefs.py: make script run correctly with Python 2.6
- objstringio: if created from immutable object, follow copy on write policy
extmod:
- modlwip: connect: for non-blocking mode, return EINPROGRESS
- modlwip: fix error codes for duplicate calls to connect()
- modlwip: accept: fix error code for non-blocking mode
- vfs: allow to statvfs the root directory
- vfs: allow "buffering" and "encoding" args to VFS's open()
- modframebuf: fix signed/unsigned comparison pendantic warning
lib:
- libm: use isfinite instead of finitef, for C99 compatibility
- utils/interrupt_char: remove support for KBD_EXCEPTION disabled
tests:
- basics/string_rsplit: add tests for negative "maxsplit" argument
- float: convert "sys.exit()" to "raise SystemExit"
- float/builtin_float_minmax: PEP8 fixes
- basics: convert "sys.exit()" to "raise SystemExit"
- convert remaining "sys.exit()" to "raise SystemExit"
unix port:
- convert to use core-provided version of built-in import()
- Makefile: replace references to make with $(MAKE)
windows port:
- convert to use core-provided version of built-in import()
qemu-arm port:
- Makefile: adjust object-file lists to get correct dependencies
- enable micropython.mem_*() functions to allow more tests
stmhal port:
- boards: enable DAC for NUCLEO_F767ZI board
- add support for NUCLEO_F446RE board
- pass USB handler as parameter to allow more than one USB handler
- usb: use local USB handler variable in Start-of-Frame handler
- usb: make state for USB device private to top-level USB driver
- usbdev: for MSC implement SCSI SYNCHRONIZE_CACHE command
- convert from using stmhal's input() to core provided version
cc3200 port:
- convert from using stmhal's input() to core provided version
teensy port:
- convert from using stmhal's input() to core provided version
esp8266 port:
- Makefile: replace references to make with $(MAKE)
- Makefile: add clean-modules target
- convert from using stmhal's input() to core provided version
zephyr port:
- modusocket: getaddrinfo: Fix mp_obj_len() usage
- define MICROPY_PY_SYS_PLATFORM (to "zephyr")
- machine_pin: use native Zephyr types for Zephyr API calls
docs:
- machine.Pin: remove out_value() method
- machine.Pin: add on() and off() methods
- esp8266: consistently replace Pin.high/low methods with .on/off
- esp8266/quickref: polish Pin.on()/off() examples
- network: move confusingly-named cc3200 Server class to its reference
- uos: deconditionalize, remove minor port-specific details
- uos: move cc3200 port legacy VFS mounting functions to its ref doc
- machine: sort machine classes in logical order, not alphabetically
- network: first step to describe standard network class interface
examples:
- embedding: use core-provided KeyboardInterrupt object
Also, rename Direction.IN to Direction.INPUT and Direction.OUT to Direction.OUTPUT.
This simplifies using them. Prior to the nativeio split this would have led to
clutter in the top-level namespace but having digitalio prevents this.
Fixes#152
buffer from start, end and length. The old code miscomputed length
leading to writing and reading from memory past the end of the buffer.
Consolidating the code should make it easier to get right everywhere.
* Track status pin use by user code separately so it can take over the pins and then give them back.
* Switch to hardware SPI for APA102 on Gemma and Trinket.
* Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
This was done to allow greatly granularity when deciding what functionality
is built into each board's build. For example, this way pulseio can be
omitted to allow for something else such as touchio.
This class focuses on the timing sensitive parts of the protocol.
Everything else will be done by Python code.
This also establishes that its OK to back a nativeio class with a
bitbang implementation when no hardware acceleration exists. When
it does, then bitbangio should be used to explicitly bitbang a
protocol.
1) Bus error will be thrown on read/write errors with errno set. (Read didn't used to fail at all.)
2) try_lock correctly returns boolean whether lock was grabbed.
Fixes#87
* Always init SPI to 250k to start for SD cards.
* Add ability to configure byte written during read.
* Add ability to read and write to portions of buffers like existing I2C API.
You can either set it once up front, or set variable_frequency on custruction to
indicate that the frequency must be able to change. This informs whether a timer
can be shared amongst pins.
This also adds persistent clock calibration on atmel-samd. Once the device has
synced its clock frequency over USB it will remember that config value until USB
is used again. This helps ensure the clock frequency is similar on and off USB.
Lastly, this also corrects time.sleep() when on USB by correcting the tick counter.
This prevents corrupting previous functional objects by stealing their pins
out from under them. It prevents this by ensuring that pins are in default
state before claiming them. It also verifies pins are released correctly and
reset on soft reset.
Fixes#4, instantiating a second class will fail.
Fixes#29, pins are now reset too.
Docs are here: http://tannewt-micropython.readthedocs.io/en/microcontroller/
It differs from upstream's machine in the following ways:
* Python API is identical across ports due to code structure. (Lives in shared-bindings)
* Focuses on abstracting common functionality (AnalogIn) and not representing structure (ADC).
* Documentation lives with code making it easy to ensure they match.
* Pin is split into references (board.D13 and microcontroller.pin.PA17) and functionality (DigitalInOut).
* All nativeio classes claim underlying hardware resources when inited on construction, support Context Managers (aka with statements) and have deinit methods which release the claimed hardware.
* All constructors take pin references rather than peripheral ids. Its up to the implementation to find hardware or throw and exception.
on a per port basis.
Also enables generating docs from inline RST in C code. Simply omits all
lines except those that start with //|. Indentation after "//| " will be
preserved.
This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api.
To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
sommersoft
Kattni
Kevin Townsend
Scott Shawcroft
arturo182
Scott Shawcroft
dean
Dan Halbert
sommersoft
Radomir Dopieralski
Kattni
Radomir Dopieralski
mrmcwethy
Josh Gadeken
Scott Shawcroft
brentru
Sebastian Plamauer