Merge branch 'origin/main' into Weblate.

locale/ID.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-10-10 23:51+0000\n"
 "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -954,6 +954,10 @@ msgstr "File sudah ada"
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -963,11 +967,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-"Frekuensi yang ditangkap berada di atas kemampuan. Penangkapan Ditunda."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Frekuensi harus cocok dengan PWMOut yang ada menggunakan timer ini"
@@ -2021,6 +2020,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3046,7 +3049,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3184,6 +3187,14 @@ msgstr "non-keyword arg setelah */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "non-keyword arg setelah keyword arg"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3256,6 +3267,10 @@ msgstr "panjang data string memiliki keganjilan (odd-length)"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 #, fuzzy
 msgid "offset out of bounds"
@@ -3602,6 +3617,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
 msgid "timeout must be >= 0.0"
@@ -3862,6 +3881,10 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr ""
+#~ "Frekuensi yang ditangkap berada di atas kemampuan. Penangkapan Ditunda."
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk "

locale/cs.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-12-04 18:33+0000\n"
 "Last-Translator: vkuthan <vit.kuthan@seznam.cz>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -940,6 +940,10 @@ msgstr ""
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -949,10 +953,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -1987,6 +1987,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3005,7 +3009,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3143,6 +3147,14 @@ msgstr ""
 msgid "non-keyword arg after keyword arg"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3215,6 +3227,10 @@ msgstr ""
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3560,6 +3576,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr ""

locale/de_DE.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-11-26 03:11+0000\n"
 "Last-Translator: Daniel Bravo Darriba <bravodarriba@gmail.com>\n"
 "Language: de_DE\n"
@@ -951,6 +951,10 @@ msgstr "Datei existiert"
 msgid "Filters too complex"
 msgstr "Filter zu komplex"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Format nicht unterstützt"
@@ -960,12 +964,6 @@ msgstr "Format nicht unterstützt"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framepuffer benötigt %d bytes"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-"Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme "
-"angehalten."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -2033,6 +2031,10 @@ msgstr "Nicht unterstützte Operation"
 msgid "Unsupported pull value."
 msgstr "Nicht unterstützter Pull-Wert."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3081,7 +3083,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "max_length muss 0-%d sein, wenn fixed_length %s ist"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3219,6 +3221,14 @@ msgstr "Nicht-Schlüsselwort arg nach * / **"
 msgid "non-keyword arg after keyword arg"
 msgstr "Nicht-Schlüsselwort Argument nach Schlüsselwort Argument"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3292,6 +3302,10 @@ msgstr "String mit ungerader Länge"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "offset außerhalb der Grenzen"
@@ -3643,6 +3657,10 @@ msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "Das Zeitlimit muss 0,0-100,0 Sekunden betragen"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "timeout muss >= 0.0 sein"
@@ -3906,6 +3924,11 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr ""
+#~ "Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme "
+#~ "angehalten."
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Drücke eine Taste um dich mit der REPL zu verbinden. Drücke Strg-D zum "

locale/el.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -935,6 +935,10 @@ msgstr ""
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -944,10 +948,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -1982,6 +1982,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3000,7 +3004,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3138,6 +3142,14 @@ msgstr ""
 msgid "non-keyword arg after keyword arg"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3210,6 +3222,10 @@ msgstr ""
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3555,6 +3571,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr ""

locale/es.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-11-27 18:34+0000\n"
 "Last-Translator: Iván Montiel Cardona <ivan_montiel2013@hotmail.com>\n"
 "Language-Team: \n"
@@ -955,6 +955,10 @@ msgstr "El archivo ya existe"
 msgid "Filters too complex"
 msgstr "Filtros muy complejos"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Sin capacidades para el formato"
@@ -964,10 +968,6 @@ msgstr "Sin capacidades para el formato"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framebuffer requiere %d bytes"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr "Frecuencia capturada por encima de la capacidad. Captura en pausa."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -2036,6 +2036,10 @@ msgstr "Operación no soportada"
 msgid "Unsupported pull value."
 msgstr "valor pull no soportado."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3073,8 +3077,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "max_length debe ser 0-%d cuando fixed_length es %s"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_lenght debe ser > 0"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3213,6 +3217,14 @@ msgstr ""
 "no deberia estar/tener agumento por palabra clave despues de argumento por "
 "palabra clave"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr "norma está definida para arrays 1D y 2D"
@@ -3286,6 +3298,10 @@ msgstr "string de longitud impar"
 msgid "offset is too large"
 msgstr "offset es demasiado grande"
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "offset fuera de límites"
@@ -3634,6 +3650,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "el tiempo de espera debe ser 0.0-100.0 segundos"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "tiempo muerto debe ser >= 0.0"
@@ -3893,6 +3913,12 @@ msgstr "zi debe ser de tipo flotante"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi debe ser una forma (n_section,2)"
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr "Frecuencia capturada por encima de la capacidad. Captura en pausa."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_lenght debe ser > 0"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Presiona cualquier tecla para entrar al REPL. Usa CTRL-D para recargar."

locale/fil.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -948,6 +948,10 @@ msgstr "Mayroong file"
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -957,10 +961,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -2004,6 +2004,10 @@ msgstr "Hindi sinusuportahang operasyon"
 msgid "Unsupported pull value."
 msgstr "Hindi suportado ang pull value."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3047,7 +3051,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3185,6 +3189,14 @@ msgstr "non-keyword arg sa huli ng */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "non-keyword arg sa huli ng keyword arg"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3257,6 +3269,10 @@ msgstr "odd-length string"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 #, fuzzy
 msgid "offset out of bounds"
@@ -3607,6 +3623,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
 msgid "timeout must be >= 0.0"

locale/fr.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-12-08 19:21+0000\n"
 "Last-Translator: Antonin ENFRUN <antonin.e@me.com>\n"
 "Language: fr\n"
@@ -960,6 +960,10 @@ msgstr "Le fichier existe"
 msgid "Filters too complex"
 msgstr "Filtre trop complexe"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Format non supporté"
@@ -969,10 +973,6 @@ msgstr "Format non supporté"
 msgid "Framebuffer requires %d bytes"
 msgstr "Le framebuffer nécessite %d octets"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr "La fréquence capturée est au delà des capacités. Capture en pause."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -2045,6 +2045,10 @@ msgstr "Opération non supportée"
 msgid "Unsupported pull value."
 msgstr "Valeur de tirage 'pull' non supportée."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3093,8 +3097,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "max_length doit être 0-%d lorsque fixed_length est %s"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_length doit être > 0"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3232,6 +3236,14 @@ msgstr "argument non-nommé après */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "argument non-nommé après argument nommé"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3305,6 +3317,10 @@ msgstr "chaîne de longueur impaire"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "décalage hors limites"
@@ -3656,6 +3672,10 @@ msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "le délai doit être compris entre 0.0 et 100.0 secondes"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "'timeout' doit être >= 0.0"
@@ -3915,6 +3935,12 @@ msgstr "zi doit être de type float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi doit être de forme (n_section, 2)"
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr "La fréquence capturée est au delà des capacités. Capture en pause."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_length doit être > 0"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger."

locale/hi.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: Automatically generated\n"
 "Language-Team: none\n"
@@ -935,6 +935,10 @@ msgstr ""
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -944,10 +948,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -1982,6 +1982,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3000,7 +3004,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3138,6 +3142,14 @@ msgstr ""
 msgid "non-keyword arg after keyword arg"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3210,6 +3222,10 @@ msgstr ""
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3555,6 +3571,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr ""

locale/it_IT.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -948,6 +948,10 @@ msgstr "File esistente"
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -957,10 +961,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -2016,6 +2016,10 @@ msgstr "Operazione non supportata"
 msgid "Unsupported pull value."
 msgstr "Valore di pull non supportato."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3050,7 +3054,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3189,6 +3193,14 @@ msgstr "argomento non nominato dopo */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "argomento non nominato seguito da argomento nominato"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3263,6 +3275,10 @@ msgstr "stringa di lunghezza dispari"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 #, fuzzy
 msgid "offset out of bounds"
@@ -3615,6 +3631,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
 msgid "timeout must be >= 0.0"

locale/ja.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-11-27 18:34+0000\n"
 "Last-Translator: sporeball <sporeballdev@gmail.com>\n"
 "Language-Team: none\n"
@@ -948,6 +948,10 @@ msgstr "ファイルが存在します"
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "非対応の形式"
@@ -957,10 +961,6 @@ msgstr "非対応の形式"
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr "キャプチャした周波数は能力を超えています。キャプチャ停止"
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "このタイマーを使う既存のPWMOutと周波数を一致させる必要があります"
@@ -2007,6 +2007,10 @@ msgstr "非対応の操作"
 msgid "Unsupported pull value."
 msgstr "非対応のpull値"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3030,8 +3034,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_lengthは0より大きくなければなりません"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3168,6 +3172,14 @@ msgstr "*/** の後に非キーワード引数は置けません"
 msgid "non-keyword arg after keyword arg"
 msgstr "キーワード引数の後に非キーワード引数は置けません"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3240,6 +3252,10 @@ msgstr "奇数長の文字列"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3588,6 +3604,10 @@ msgstr "タイムアウト長は対応する最大値を超えています"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "timeoutは0.0〜100.0秒でなければなりません"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "timeoutは0.0以上でなければなりません"
@@ -3847,6 +3867,12 @@ msgstr "ziはfloat値でなければなりません"
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr "キャプチャした周波数は能力を超えています。キャプチャ停止"
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_lengthは0より大きくなければなりません"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr "何らかのキーを押すとREPLに入ります。CTRL-Dでリロード。"
 

locale/ko.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-10-05 12:12+0000\n"
 "Last-Translator: Michal Čihař <michal@cihar.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -940,6 +940,10 @@ msgstr ""
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr ""
@@ -949,10 +953,6 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -1988,6 +1988,10 @@ msgstr ""
 msgid "Unsupported pull value."
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3006,7 +3010,7 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
@@ -3144,6 +3148,14 @@ msgstr ""
 msgid "non-keyword arg after keyword arg"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3216,6 +3228,10 @@ msgstr ""
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3561,6 +3577,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr ""

locale/nl.po

@@ -5,16 +5,16 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
-"PO-Revision-Date: 2020-10-27 16:47+0000\n"
+"PO-Revision-Date: 2020-12-23 20:14+0000\n"
-"Last-Translator: Jelle Jager <jell@jjc.id.au>\n"
+"Last-Translator: _fonzlate <vooralfred@gmail.com>\n"
 "Language-Team: none\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.3.2-dev\n"
+"X-Generator: Weblate 4.4.1-dev\n"
 
 #: main.c
 msgid ""
@@ -294,7 +294,7 @@ msgstr "Adres type buiten bereik"
 
 #: ports/esp32s2/common-hal/canio/CAN.c
 msgid "All CAN peripherals are in use"
-msgstr ""
+msgstr "Alle CAN-peripherals zijn in gebruik"
 
 #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
@@ -304,7 +304,7 @@ msgstr "Alle I2C peripherals zijn in gebruik"
 #: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
-msgstr ""
+msgstr "Alle PCNT-eenheden zijn in gebruik"
 
 #: ports/atmel-samd/common-hal/canio/Listener.c
 #: ports/esp32s2/common-hal/canio/Listener.c
@@ -427,7 +427,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/canio/CAN.c
 msgid "Baudrate not supported by peripheral"
-msgstr ""
+msgstr "Baudrate wordt niet ondersteund door randapparatuur"
 
 #: shared-module/displayio/Display.c
 #: shared-module/framebufferio/FramebufferDisplay.c
@@ -441,7 +441,7 @@ msgstr "Bit clock en word select moeten een clock eenheid delen"
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Bit depth must be from 1 to 6 inclusive, not %d"
-msgstr ""
+msgstr "Bitdiepte moet tussen 1 en 6 liggen, niet %d"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Bit depth must be multiple of 8."
@@ -859,7 +859,7 @@ msgstr "Verwachtte een adres"
 
 #: shared-bindings/alarm/__init__.c
 msgid "Expected an alarm"
-msgstr ""
+msgstr "Verwachtte een alarm"
 
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
@@ -876,7 +876,7 @@ msgstr "FFT alleen voor ndarrays gedefineerd"
 
 #: extmod/ulab/code/fft/fft.c
 msgid "FFT is implemented for linear arrays only"
-msgstr ""
+msgstr "FFT is alleen geïmplementeerd voor lineaire arrays"
 
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Failed SSL handshake"
@@ -948,6 +948,10 @@ msgstr "Bestand bestaat"
 msgid "Filters too complex"
 msgstr "Filters zijn te complex"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr "Firmware image is ongeldig"
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Formaat wordt niet ondersteund"
@@ -957,11 +961,6 @@ msgstr "Formaat wordt niet ondersteund"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framebuffer benodigd %d bytes"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-"De vastgelegde frequentie is boven de capaciteit. Vastleggen gepauzeerd."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -1010,7 +1009,7 @@ msgstr "I2SOut is niet beschikbaar"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
-msgstr ""
+msgstr "IO's 0, 2 en 4 ondersteunen geen interne pullup in slaapstand"
 
 #: shared-bindings/aesio/aes.c
 #, c-format
@@ -1031,7 +1030,7 @@ msgstr "Incorrecte buffer grootte"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
-msgstr ""
+msgstr "De initialisatie is mislukt vanwege een gebrek aan geheugen"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "Input taking too long"
@@ -1098,7 +1097,7 @@ msgstr "Ongeldige PWM frequentie"
 
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 msgid "Invalid Pin"
-msgstr ""
+msgstr "Ongeldige Pin"
 
 #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
@@ -1296,7 +1295,7 @@ msgstr "Een meervoud van 6 rgb pinnen moet worden gebruikt, niet %d"
 
 #: ports/esp32s2/common-hal/nvm/ByteArray.c
 msgid "NVS Error"
-msgstr ""
+msgstr "NVS-fout"
 
 #: py/parse.c
 msgid "Name too long"
@@ -1319,7 +1318,7 @@ msgstr "Geen DMA kanaal gevonden"
 #: shared-module/adafruit_bus_device/I2CDevice.c
 #, c-format
 msgid "No I2C device at address: %x"
-msgstr ""
+msgstr "Geen I2C-apparaat op adres: %x"
 
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
@@ -1461,7 +1460,7 @@ msgstr "Alleen IPv4 adressen worden ondersteund"
 
 #: ports/esp32s2/common-hal/socketpool/SocketPool.c
 msgid "Only IPv4 sockets supported"
-msgstr ""
+msgstr "Alleen IPv4-sockets ondersteund"
 
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
@@ -1482,7 +1481,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "Only one alarm.time alarm can be set."
-msgstr ""
+msgstr "Slechts één alarm.time alarm kan worden ingesteld."
 
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
@@ -1547,7 +1546,7 @@ msgstr "Pin nummer al gereserveerd door EXTI"
 
 #: ports/esp32s2/common-hal/alarm/__init__.c
 msgid "PinAlarm not yet implemented"
-msgstr ""
+msgstr "PinAlarm nog niet geïmplementeerd"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
@@ -1594,10 +1593,14 @@ msgstr "Prefix buffer moet op de heap zijn"
 #: main.c
 msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
 msgstr ""
+"Druk een willekeurige toets om de REPL te starten. Gebruik CTRL+D om te "
+"herstarten.\n"
 
 #: main.c
 msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
+"Simuleert diepe slaapstand tot alarm, een willekeurige toets of schrijven "
+"naar bestand.\n"
 
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
@@ -1769,7 +1772,7 @@ msgstr "Geef op zijn minst 1 UART pin op"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Supply one of monotonic_time or epoch_time"
-msgstr ""
+msgstr "Geef monotonic_time of epoch_time"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
@@ -1844,7 +1847,7 @@ msgstr "Tile breedte moet exact de bitmap breedte verdelen"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "Time is in the past."
-msgstr ""
+msgstr "Tijdstip ligt in het verleden."
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
@@ -1959,7 +1962,7 @@ msgstr "Niet in staat om naar nvm te schrijven."
 
 #: shared-bindings/alarm/SleepMemory.c
 msgid "Unable to write to sleep_memory."
-msgstr ""
+msgstr "Kan niet naar sleep_memory schrijven."
 
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
@@ -2027,6 +2030,10 @@ msgstr "Niet-ondersteunde operatie"
 msgid "Unsupported pull value."
 msgstr "Niet-ondersteunde pull-waarde."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr "Update Mislukt"
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -2094,7 +2101,7 @@ msgstr "WiFi wachtwoord moet tussen 8 en 63 karakters bevatten"
 
 #: main.c
 msgid "Woken up by alarm.\n"
-msgstr ""
+msgstr "Gewekt door alarm.\n"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
@@ -2151,7 +2158,7 @@ msgstr "argsort argument moet een ndarray zijn"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "argsort is not implemented for flattened arrays"
-msgstr ""
+msgstr "argsort wordt niet geïmplementeerd voor vlakke arrays"
 
 #: py/runtime.c
 msgid "argument has wrong type"
@@ -2176,7 +2183,7 @@ msgstr "argumenten moeten ndarrays zijn"
 
 #: extmod/ulab/code/ndarray.c
 msgid "array and index length must be equal"
-msgstr ""
+msgstr "array en indexlengte moeten gelijk zijn"
 
 #: py/objarray.c shared-bindings/alarm/SleepMemory.c
 #: shared-bindings/nvm/ByteArray.c
@@ -2185,7 +2192,7 @@ msgstr "array/bytes vereist aan de rechterkant"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get (arg)min/(arg)max of empty sequence"
-msgstr ""
+msgstr "verzoek om (arg)min.(arg)max te krijgen van lege reeks"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get argmin/argmax of an empty sequence"
@@ -2197,15 +2204,15 @@ msgstr "attributen nog niet ondersteund"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis is out of bounds"
-msgstr ""
+msgstr "as is buiten bereik"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis must be None, or an integer"
-msgstr ""
+msgstr "as moet None of een integer zijn"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "axis too long"
-msgstr ""
+msgstr "as te lang"
 
 #: py/builtinevex.c
 msgid "bad compile mode"
@@ -2411,7 +2418,7 @@ msgstr "kan niet schakelen tussen handmatige en automatische veld specificatie"
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "cannot cast output with casting rule"
-msgstr ""
+msgstr "kan uitvoer niet converteren zonder conversieregel"
 
 #: py/objtype.c
 msgid "cannot create '%q' instances"
@@ -2512,7 +2519,7 @@ msgstr "kon SD kaart versie niet bepalen"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "cross is defined for 1D arrays of length 3"
-msgstr ""
+msgstr "kruis wordt gedefinieerd voor 1D-arrays van lengte 3"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "data must be iterable"
@@ -2555,7 +2562,7 @@ msgstr "diff argument moet een ndarray zijn"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "differentiation order out of range"
-msgstr ""
+msgstr "differentiatievolgorde buiten bereik"
 
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
@@ -2588,7 +2595,7 @@ msgstr "end_x moet een int zijn"
 
 #: shared-bindings/alarm/time/TimeAlarm.c
 msgid "epoch_time not supported on this board"
-msgstr ""
+msgstr "epoch_time niet ondersteund op dit bord"
 
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
@@ -2678,7 +2685,7 @@ msgstr "eerste argument moet een functie zijn"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "first argument must be a tuple of ndarrays"
-msgstr ""
+msgstr "eerste argument moet een tupel van ndarrays zijn"
 
 #: extmod/ulab/code/ndarray.c
 msgid "first argument must be an iterable"
@@ -2735,7 +2742,7 @@ msgstr "functie heeft hetzelfde teken aan beide uiteinden van het interval"
 
 #: extmod/ulab/code/ndarray.c
 msgid "function is defined for ndarrays only"
-msgstr ""
+msgstr "functie is alleen gedefinieerd voor ndarrays"
 
 #: py/argcheck.c
 #, c-format
@@ -2832,7 +2839,7 @@ msgstr "inline assembler moet een functie zijn"
 
 #: extmod/ulab/code/ndarray.c
 msgid "input and output shapes are not compatible"
-msgstr ""
+msgstr "in- en uitvoervormen zijn niet compatibel"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input argument must be an integer or a 2-tuple"
@@ -2844,7 +2851,7 @@ msgstr "invoer array lengte moet een macht van 2 zijn"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input arrays are not compatible"
-msgstr ""
+msgstr "input arrays zijn niet compatibel"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "input data must be an iterable"
@@ -2860,19 +2867,19 @@ msgstr "invoermatrix is singulier"
 
 #: extmod/ulab/code/user/user.c
 msgid "input must be a dense ndarray"
-msgstr ""
+msgstr "invoer moet een gesloten ndarray zijn"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "input must be a tensor of rank 2"
-msgstr ""
+msgstr "invoer moet een tensor van rang 2 zijn"
 
 #: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
 msgid "input must be an ndarray"
-msgstr ""
+msgstr "invoer moet een ndarray zijn"
 
 #: extmod/ulab/code/filter/filter.c
 msgid "input must be one-dimensional"
-msgstr ""
+msgstr "invoer moet eendimensionaal zijn"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "input must be square matrix"
@@ -2888,7 +2895,7 @@ msgstr "invoervectors moeten van gelijke lengte zijn"
 
 #: extmod/ulab/code/poly/poly.c
 msgid "inputs are not iterable"
-msgstr ""
+msgstr "invoer is niet itereerbaar"
 
 #: py/parsenum.c
 msgid "int() arg 2 must be >= 2 and <= 36"
@@ -2962,7 +2969,7 @@ msgstr "ongeldige syntax voor nummer"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "io must be rtc io"
-msgstr ""
+msgstr "io moet rtc io zijn"
 
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
@@ -3033,7 +3040,7 @@ msgstr "long int wordt niet ondersteund in deze build"
 
 #: ports/esp32s2/common-hal/canio/CAN.c
 msgid "loopback + silent mode not supported by peripheral"
-msgstr ""
+msgstr "loopback + silent mode wordt niet ondersteund door randapparaat"
 
 #: py/parse.c
 msgid "malformed f-string"
@@ -3062,12 +3069,12 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "max_length moet 0-%d zijn als fixed_length %s is"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_length moet >0 zijn"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
-msgstr ""
+msgstr "maximaal aantal dimensies is 4"
 
 #: py/runtime.c
 msgid "maximum recursion depth exceeded"
@@ -3075,11 +3082,11 @@ msgstr "maximale recursiediepte overschreden"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "maxiter must be > 0"
-msgstr ""
+msgstr "maxiter moet groter dan 0 zijn"
 
 #: extmod/ulab/code/approx/approx.c
 msgid "maxiter should be > 0"
-msgstr ""
+msgstr "maxiter moet groter dan 0 zijn"
 
 #: py/runtime.c
 #, c-format
@@ -3200,9 +3207,17 @@ msgstr "niet-trefwoord argument na */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "niet-trefwoord argument na trefwoord argument"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
-msgstr ""
+msgstr "norm is gedefinieerd voor 1D en 2D arrays"
 
 #: shared-bindings/_bleio/UUID.c
 msgid "not a 128-bit UUID"
@@ -3270,7 +3285,11 @@ msgstr "string met oneven lengte"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "offset is too large"
-msgstr ""
+msgstr "compensatie is te groot"
+
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr "compensatie moet groter of gelijk 0 zijn"
 
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
@@ -3296,11 +3315,11 @@ msgstr "operands konden niet samen verzonden worden"
 
 #: extmod/ulab/code/ndarray.c
 msgid "operation is implemented for 1D Boolean arrays only"
-msgstr ""
+msgstr "operatie is alleen geïmplementeerd voor 1D Booleaanse arrays"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented for flattened array"
-msgstr ""
+msgstr "operatie is niet geïmplementeerd voor vlakke array"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented on ndarrays"
@@ -3439,7 +3458,7 @@ msgstr "gevraagde lengte is %d maar object heeft lengte %d"
 
 #: extmod/ulab/code/ndarray_operators.c
 msgid "results cannot be cast to specified type"
-msgstr ""
+msgstr "resultaat kan niet naar gespecificeerd type geconverteerd worden"
 
 #: py/compile.c
 msgid "return annotation must be an identifier"
@@ -3461,7 +3480,7 @@ msgstr "rgb_pins[%d] bevindt zich niet op dezelfde poort als klok"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "roll argument must be an ndarray"
-msgstr ""
+msgstr "roll argument moet een ndarray zijn"
 
 #: py/objstr.c
 msgid "rsplit(None,n)"
@@ -3489,7 +3508,7 @@ msgstr "scriptcompilatie wordt niet ondersteund"
 
 #: extmod/ulab/code/ndarray.c
 msgid "shape must be a tuple"
-msgstr ""
+msgstr "vorm moet een tupel zijn"
 
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
@@ -3620,6 +3639,10 @@ msgstr "time-outduur is groter dan de ondersteunde maximale waarde"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "timeout moet tussen 0.0 en 100.0 seconden zijn"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "timeout moet groter dan 0.0 zijn"
@@ -3638,7 +3661,7 @@ msgstr "timestamp buiten bereik voor platform time_t"
 
 #: extmod/ulab/code/ndarray.c
 msgid "tobytes can be invoked for dense arrays only"
-msgstr ""
+msgstr "tobytes kunnen alleen ingeroepen worden voor gesloten arrays"
 
 #: shared-module/struct/__init__.c
 msgid "too many arguments provided with the given format"
@@ -3659,7 +3682,7 @@ msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "trigger level must be 0 or 1"
-msgstr ""
+msgstr "triggerniveau moet 0 of 1 zijn"
 
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
@@ -3672,12 +3695,12 @@ msgstr "tuple of lijst heeft onjuiste lengte"
 #: ports/esp32s2/common-hal/canio/CAN.c
 #, c-format
 msgid "twai_driver_install returned esp-idf error #%d"
-msgstr ""
+msgstr "twai_driver_install geeft esp-idf fout #%d"
 
 #: ports/esp32s2/common-hal/canio/CAN.c
 #, c-format
 msgid "twai_start returned esp-idf error #%d"
-msgstr ""
+msgstr "twai_start geeft esp-idf error #%d"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
@@ -3805,11 +3828,11 @@ msgstr "vectoren moeten van gelijke lengte zijn"
 
 #: ports/esp32s2/common-hal/alarm/pin/__init__.c
 msgid "wakeup conflict"
-msgstr ""
+msgstr "conflict bij ontwaken"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
-msgstr ""
+msgstr "watchdog niet geïnitialiseerd"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "watchdog timeout must be greater than 0"
@@ -3825,11 +3848,11 @@ msgstr "window moet <= interval zijn"
 
 #: extmod/ulab/code/numerical/numerical.c
 msgid "wrong axis index"
-msgstr ""
+msgstr "foute index voor as"
 
 #: extmod/ulab/code/ulab_create.c
 msgid "wrong axis specified"
-msgstr ""
+msgstr "onjuiste as gespecificeerd"
 
 #: extmod/ulab/code/vector/vectorise.c
 msgid "wrong input type"
@@ -3879,6 +3902,13 @@ msgstr "zi moet van type float zijn"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi moet vorm (n_section, 2) hebben"
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr ""
+#~ "De vastgelegde frequentie is boven de capaciteit. Vastleggen gepauzeerd."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_length moet >0 zijn"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Druk een willekeurige toets om de REPL te starten. Gebruik CTRL+D om te "

locale/pl.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-12-02 20:29+0000\n"
 "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n"
 "Language-Team: pl\n"
@@ -948,6 +948,10 @@ msgstr "Plik istnieje"
 msgid "Filters too complex"
 msgstr ""
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Nie wspierany format"
@@ -957,10 +961,6 @@ msgstr "Nie wspierany format"
 msgid "Framebuffer requires %d bytes"
 msgstr "Bufor ramki wymaga %d bajtów"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr "Uzyskana częstotliwość jest niemożliwa. Spauzowano."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -1998,6 +1998,10 @@ msgstr "Zła operacja"
 msgid "Unsupported pull value."
 msgstr "Zła wartość podciągnięcia."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3023,8 +3027,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr ""
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_length musi być > 0"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3161,6 +3165,14 @@ msgstr "argument nienazwany po */**"
 msgid "non-keyword arg after keyword arg"
 msgstr "argument nienazwany po nazwanym"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3233,6 +3245,10 @@ msgstr "łańcuch o nieparzystej długości"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "offset poza zakresem"
@@ -3580,6 +3596,10 @@ msgstr ""
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "timeout musi być >= 0.0"
@@ -3839,6 +3859,12 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr "Uzyskana częstotliwość jest niemożliwa. Spauzowano."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_length musi być > 0"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr "Dowolny klawisz aby uruchomić konsolę. CTRL-D aby przeładować."
 

locale/pt_BR.po

@@ -5,8 +5,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
-"PO-Revision-Date: 2020-12-16 17:00+0000\n"
+"PO-Revision-Date: 2020-12-22 18:07+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -957,6 +957,10 @@ msgstr "Arquivo já existe"
 msgid "Filters too complex"
 msgstr "Os filtros são muito complexos"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr "A imagem do firmware é invalida"
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "O formato não é suportado"
@@ -966,11 +970,6 @@ msgstr "O formato não é suportado"
 msgid "Framebuffer requires %d bytes"
 msgstr "O Framebuffer requer %d bytes"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr ""
-"A frequência capturada está acima da capacidade. A captura está em pausa."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
@@ -2045,6 +2044,10 @@ msgstr "Operação não suportada"
 msgid "Unsupported pull value."
 msgstr "O valor pull não é compatível."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr "A atualização falou"
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3085,8 +3088,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "o max_length deve ser 0-%d quando Fixed_length for %s"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_length deve ser > 0"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3225,6 +3228,14 @@ msgstr "um arg sem palavra-chave após */ **"
 msgid "non-keyword arg after keyword arg"
 msgstr "um arg não-palavra-chave após a palavra-chave arg"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr "a norma é definida para matrizes 1D e 2D"
@@ -3297,6 +3308,10 @@ msgstr "sequência com comprimento ímpar"
 msgid "offset is too large"
 msgstr "o offset é muito grande"
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr "o offset deve ser >= 0"
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "desvio fora dos limites"
@@ -3649,6 +3664,10 @@ msgstr "a duração do tempo limite excedeu o valor máximo suportado"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "o tempo limite deve ser entre 0.0 a 100.0 segundos"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "o tempo limite deve ser >= 0,0"
@@ -3908,6 +3927,13 @@ msgstr "zi deve ser de um tipo float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi deve estar na forma (n_section, 2)"
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr ""
+#~ "A frequência capturada está acima da capacidade. A captura está em pausa."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_length deve ser > 0"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Pressione qualquer tecla para entrar no REPL. Use CTRL-D para recarregar."

locale/sv.po

@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-12-07 20:26+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -948,6 +948,10 @@ msgstr "Filen finns redan"
 msgid "Filters too complex"
 msgstr "Filter för komplexa"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Formatet stöds inte"
@@ -957,10 +961,6 @@ msgstr "Formatet stöds inte"
 msgid "Framebuffer requires %d bytes"
 msgstr "Framebuffer kräver %d byte"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr "Infångningsfrekvens är för hög. Infångning pausad."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Frekvensen måste matcha befintlig PWMOut med denna timer"
@@ -2024,6 +2024,10 @@ msgstr "Åtgärd som inte stöds"
 msgid "Unsupported pull value."
 msgstr "Ogiltigt Pull-värde."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3056,8 +3060,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "max_length måste vara 0-%d när fixed_length är %s"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "max_length måste vara > 0"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3194,6 +3198,14 @@ msgstr "icke nyckelord arg efter * / **"
 msgid "non-keyword arg after keyword arg"
 msgstr "icke nyckelord arg efter nyckelord arg"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr "norm är definierad för 1D- och 2D-matriser"
@@ -3266,6 +3278,10 @@ msgstr "sträng har udda längd"
 msgid "offset is too large"
 msgstr "offset är för stor"
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "offset utanför gränserna"
@@ -3614,6 +3630,10 @@ msgstr "timeout-längd överskred det maximala värde som stöds"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "timeout måste vara 0.0-100.0 sekunder"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "timeout måste vara >= 0.0"
@@ -3873,6 +3893,12 @@ msgstr "zi måste vara av typ float"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi måste vara i formen (n_section, 2)"
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr "Infångningsfrekvens är för hög. Infångning pausad."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "max_length måste vara > 0"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr ""
 #~ "Tryck på valfri knapp för att gå in i REPL. Använd CTRL-D för att ladda "

locale/zh_Latn_pinyin.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-12-14 12:59-0500\n"
+"POT-Creation-Date: 2020-12-23 16:41-0500\n"
 "PO-Revision-Date: 2020-11-19 01:28+0000\n"
 "Last-Translator: hexthat <hexthat@gmail.com>\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -946,6 +946,10 @@ msgstr "Wénjiàn cúnzài"
 msgid "Filters too complex"
 msgstr "guò lǜ qì tài fù zá"
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Firmware image is invalid"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Format not supported"
 msgstr "Bù zhīyuán géshì"
@@ -955,10 +959,6 @@ msgstr "Bù zhīyuán géshì"
 msgid "Framebuffer requires %d bytes"
 msgstr "zhēn huǎn chōng qū xū yào %d zì jié"
 
-#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
-msgid "Frequency captured is above capability. Capture Paused."
-msgstr "Pínlǜ bǔhuò gāo yú nénglì. Bǔhuò zàntíng."
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr "Pínlǜ bìxū yǔ shǐyòng cǐ jìshí qì de xiàn yǒu PWMOut xiāng pǐpèi"
@@ -2016,6 +2016,10 @@ msgstr "Bù zhīchí de cāozuò"
 msgid "Unsupported pull value."
 msgstr "Bù zhīchí de lādòng zhí."
 
+#: ports/esp32s2/common-hal/dualbank/__init__.c
+msgid "Update Failed"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 msgid "Value length != required fixed length"
@@ -3047,8 +3051,8 @@ msgid "max_length must be 0-%d when fixed_length is %s"
 msgstr "Dāng gùdìng chángdù wèi %s shí, zuìdà chángdù bìxū wèi 0-%d"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
-msgid "max_length must be > 0"
+msgid "max_length must be >= 0"
-msgstr "Max_length bìxū > 0"
+msgstr ""
 
 #: extmod/ulab/code/ndarray.c
 msgid "maximum number of dimensions is 4"
@@ -3185,6 +3189,14 @@ msgstr "zài */** zhīhòu fēi guānjiàn cí cānshù"
 msgid "non-keyword arg after keyword arg"
 msgstr "guānjiàn zì cānshù zhīhòu de fēi guānjiàn zì cānshù"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "non-zero timeout must be > 0.01"
+msgstr ""
+
+#: shared-bindings/_bleio/Adapter.c
+msgid "non-zero timeout must be >= interval"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "norm is defined for 1D and 2D arrays"
 msgstr ""
@@ -3257,6 +3269,10 @@ msgstr "jīshù zìfú chuàn"
 msgid "offset is too large"
 msgstr ""
 
+#: shared-bindings/dualbank/__init__.c
+msgid "offset must be >= 0"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr "piānlí biānjiè"
@@ -3604,6 +3620,10 @@ msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí"
 msgid "timeout must be 0.0-100.0 seconds"
 msgstr "Chāo shí shíjiān bìxū wèi 0.0 Dào 100.0 Miǎo"
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "timeout must be < 655.35 secs"
+msgstr ""
+
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
 msgstr "chāoshí bìxū shì >= 0.0"
@@ -3863,6 +3883,12 @@ msgstr "zi bìxū wèi fú diǎn xíng"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)"
 
+#~ msgid "Frequency captured is above capability. Capture Paused."
+#~ msgstr "Pínlǜ bǔhuò gāo yú nénglì. Bǔhuò zàntíng."
+
+#~ msgid "max_length must be > 0"
+#~ msgstr "Max_length bìxū > 0"
+
 #~ msgid "Press any key to enter the REPL. Use CTRL-D to reload."
 #~ msgstr "Àn xià rènhé jiàn jìnrù REPL. Shǐyòng CTRL-D chóngxīn jiāzài."