Merge branch 'master' into ndbit6

.github/workflows/build.yml

@@ -73,6 +73,7 @@ jobs:
       fail-fast: false
       matrix:
         board:
+        - "aramcon_badge_2019"
         - "arduino_mkr1300"
         - "arduino_mkrzero"
         - "arduino_nano_33_ble"
@@ -84,6 +85,7 @@ jobs:
         - "circuitplayground_express"
         - "circuitplayground_express_crickit"
         - "circuitplayground_express_displayio"
+        - "clue_nrf52840_express"
         - "cp32-m4"
         - "datalore_ip_m4"
         - "datum_distance"
@@ -101,6 +103,8 @@ jobs:
         - "feather_m0_rfm9x"
         - "feather_m0_supersized"
         - "feather_m4_express"
+        - "feather_mimxrt1011"
+        - "feather_mimxrt1062"
         - "feather_nrf52840_express"
         - "feather_radiofruit_zigbee"
         - "feather_stm32f405_express"
@@ -108,6 +112,7 @@ jobs:
         - "grandcentral_m4_express"
         - "hallowing_m0_express"
         - "hallowing_m4_express"
+        - "imxrt1010_evk"
         - "itsybitsy_m0_express"
         - "itsybitsy_m4_express"
         - "itsybitsy_nrf52840_express"
@@ -122,6 +127,8 @@ jobs:
         - "mini_sam_m4"
         - "monster_m4sk"
         - "ndgarage_ndbit6"
+        - "ohs2020_badge"
+        - "openbook_m4"
         - "particle_argon"
         - "particle_boron"
         - "particle_xenon"
@@ -130,6 +137,7 @@ jobs:
         - "pewpew10"
         - "pewpew_m4"
         - "pirkey_m0"
+        - "pyb_nano_v2"
         - "pybadge"
         - "pybadge_airlift"
         - "pyboard_v11"
@@ -138,10 +146,11 @@ jobs:
         - "pyportal"
         - "pyportal_titano"
         - "pyruler"
-        - "robohatmm1_m0"
         - "robohatmm1_m4"
         - "sam32"
+        - "seeeduino_xiao"
         - "serpente"
+        - "shirtty"
         - "snekboard"
         - "sparkfun_lumidrive"
         - "sparkfun_nrf52840_mini"
@@ -151,15 +160,19 @@ jobs:
         - "sparkfun_samd21_dev"
         - "sparkfun_samd21_mini"
         - "spresense"
+        - "stm32f411ce_blackpill"
         - "stm32f411ve_discovery"
         - "stm32f412zg_discovery"
         - "stringcar_m0_express"
+        - "teknikio_bluebird"
         - "trellis_m4_express"
         - "trinket_m0"
         - "trinket_m0_haxpress"
         - "uchip"
         - "ugame10"
         - "winterbloom_sol"
+        - "xinabox_cc03"
+        - "xinabox_cs11"
 
     steps:
     - name: Set up Python 3.5
@@ -170,7 +183,8 @@ jobs:
       run: |
         sudo apt-get install -y gettext
         pip install requests sh click setuptools awscli
-        wget https://s3.amazonaws.com/adafruit-circuit-python/gcc-arm-embedded_7-2018q2-1~xenial1_amd64.deb && sudo dpkg -i gcc-arm-embedded*_amd64.deb
+        wget https://adafruit-circuit-python.s3.amazonaws.com/gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2
+        sudo tar -C /usr --strip-components=1 -xaf gcc-arm-none-eabi-9-2019-q4-major-x86_64-linux.tar.bz2
     - name: Versions
       run: |
         gcc --version
@@ -191,7 +205,7 @@ jobs:
         name: ${{ matrix.board }}
         path: bin/${{ matrix.board }}
     - name: Upload to S3
-      run: aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1
+      run: "[ -z \"$AWS_ACCESS_KEY_ID\" ] || aws s3 cp bin/ s3://adafruit-circuit-python/bin/ --recursive --no-progress --region us-east-1"
       env:
         AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
         AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
@@ -200,7 +214,7 @@ jobs:
       run: |
         pip install uritemplate
     - name: Upload to Release
-      run: python3 -u upload_release_files.py
+      run: "[ -z \"$ADABOT_GITHUB_ACCESS_TOKEN\" ] || python3 -u upload_release_files.py"
       working-directory: tools
       env:
         UPLOAD_URL: ${{ github.event.release.upload_url }}

.gitignore

@@ -65,6 +65,8 @@ TAGS
 *~
 
 *.DS_Store
+**/*.DS_Store
+*.icloud
 
 # POEdit mo files
 ####################

.gitmodules

@@ -76,7 +76,8 @@
 [submodule "lib/tinyusb"]
 	path = lib/tinyusb
 	url = https://github.com/hathach/tinyusb.git
-	branch = develop
+	branch = master
+	fetchRecurseSubmodules = false
 [submodule "tools/huffman"]
 	path = tools/huffman
 	url = https://github.com/tannewt/huffman.git
@@ -101,3 +102,12 @@
 [submodule "ports/cxd56/spresense-exported-sdk"]
 	path = ports/cxd56/spresense-exported-sdk
 	url = https://github.com/sonydevworld/spresense-exported-sdk.git
+[submodule "frozen/Adafruit_CircuitPython_SD"]
+	path = frozen/Adafruit_CircuitPython_SD
+	url = https://github.com/adafruit/Adafruit_CircuitPython_SD.git
+[submodule "lib/mp3"]
+	path = lib/mp3
+	url = https://github.com/adafruit/Adafruit_MP3
+[submodule "ports/mimxrt10xx/sdk"]
+	path = ports/mimxrt10xx/sdk
+	url = https://github.com/arturo182/MIMXRT10xx_SDK

BUILDING.md

@@ -0,0 +1,82 @@
+
+# Building CircuitPython
+
+Welcome to CircuitPython!  
+
+This document is a quick-start guide only.
+
+Detailed guides on how to build CircuitPython can be found in the Adafruit Learn system at
+https://learn.adafruit.com/building-circuitpython/
+
+## Setup
+
+Please ensure you setup your build environment appropriately, as per the guide.  You will need:
+
+* Linux: https://learn.adafruit.com/building-circuitpython/linux
+* MacOS: https://learn.adafruit.com/building-circuitpython/macos
+* Windows Subsystem for Linux (WSL): https://learn.adafruit.com/building-circuitpython/windows-subsystem-for-linux
+
+### Submodules
+
+This project has a bunch of git submodules.  You will need to update them regularly.
+
+    git submodule sync
+    git submodule update --init
+
+### mpy-cross
+
+As part of the build process, mpy-cross is needed to compile .py files into .mpy files.
+To compile (or recompile) mpy-cross:
+
+    make -C mpy-cross 
+
+# Building
+
+There a number of ports of CircuitPython!  To build for your board, change to the appropriate ports directory and build.
+
+Examples:
+
+    cd ports/atmel-samd
+    make BOARD=circuitplayground_express
+
+    cd ports/nrf
+    make BOARD=circuitplayground_bluefruit
+
+If you aren't sure what boards exist, have a peek in the boards subdirectory of your port.
+If you have a fast computer with many cores, consider adding `-j` to your build flags, such as `-j17` on
+a 6-core 12-thread machine.
+
+# Testing
+
+If you are working on changes to the core language, you might find it useful to run the test suite.
+The test suite in the top level `tests` directory.  It needs the unix port to run.
+
+    cd ports/unix
+    make axtls
+    make micropython
+
+Then you can run the test suite:
+
+    cd ../../tests
+    ./run-tests
+
+A successful run will say something like
+
+    676 tests performed (19129 individual testcases)
+    676 tests passed
+    30 tests skipped: buffered_writer builtin_help builtin_range_binop class_delattr_setattr cmd_parsetree extra_coverage framebuf1 framebuf16 framebuf2 framebuf4 framebuf8 framebuf_subclass mpy_invalid namedtuple_asdict non_compliant resource_stream schedule sys_getsizeof urandom_extra ure_groups ure_span ure_sub ure_sub_unmatched vfs_basic vfs_fat_fileio1 vfs_fat_fileio2 vfs_fat_more vfs_fat_oldproto vfs_fat_ramdisk vfs_userfs
+
+# Debugging
+
+The easiest way to debug CircuitPython on hardware is with a JLink device, JLinkGDBServer, and an appropriate GDB.   
+Instructions can be found at https://learn.adafruit.com/debugging-the-samd21-with-gdb
+
+If using JLink, you'll need both the `JLinkGDBServer` and `arm-none-eabi-gdb` running.
+
+Example:
+
+    JLinkGDBServer -if SWD -device ATSAMD51J19
+    arm-none-eabi-gdb build-metro_m4_express/firmware.elf -iex "target extended-remote :2331"
+
+If your port/build includes `arm-none-eabi-gdb-py`, consider using it instead, as it can be used for better register
+debugging with https://github.com/bnahill/PyCortexMDebug

Makefile

@@ -204,7 +204,7 @@ pseudoxml:
 all-source:
 
 locale/circuitpython.pot: all-source
-	find $(TRANSLATE_SOURCES) -iname "*.c" -print0 | (LC_ALL=C sort -z) | xargs -0 xgettext -L C -s --add-location=file --keyword=translate -o circuitpython.pot -p locale
+	find $(TRANSLATE_SOURCES) -iname "*.c" -print | (LC_ALL=C sort) | xgettext -f- -L C -s --add-location=file --keyword=translate -o circuitpython.pot -p locale
 
 translate: locale/circuitpython.pot
 	for po in $(shell ls locale/*.po); do msgmerge -U $$po -s --no-fuzzy-matching --add-location=file locale/circuitpython.pot; done

README.rst

@@ -94,13 +94,12 @@ Differences from `MicroPython <https://github.com/micropython/micropython>`__
 
 CircuitPython:
 
--  includes ports for MicroChip SAMD21 (Commonly known as M0 in Adafruit
+-  Supports native USB on all boards, allowing file editing without special tools.
-   product names) and SAMD51 (M4).
+-  Supports only SAMD21, SAMD51, nRF52840, CXD56, STM32F4 and i.MX RT ports.
--  supports only SAMD21, SAMD51, and nRF52840 ports.
+-  Tracks MicroPython's releases (not master).
--  tracks MicroPython's releases (not master).
+-  Floats (aka decimals) are enabled for all builds.
--  floats (aka decimals) are enabled for all builds.
+-  Error messages are translated into 10+ languages.
--  error messages are translated into 10+ languages.
+-  Does not support concurrency within Python (including interrupts and threading). Some concurrency
--  does not support concurrency within Python (including interrupts and threading). Some concurrency
    is achieved with native modules for tasks that require it such as audio file playback.
 
 Behavior

conf.py

@@ -125,12 +125,15 @@ exclude_patterns = ["**/build*",
                     "ports/cc3200",
                     "ports/cc3200/FreeRTOS",
                     "ports/cc3200/hal",
+                    "ports/cxd56/mkspk",
                     "ports/cxd56/spresense-exported-sdk",
                     "ports/esp32",
                     "ports/esp8266/boards",
                     "ports/esp8266/common-hal",
                     "ports/esp8266/modules",
                     "ports/minimal",
+                    "ports/mimxrt10xx/peripherals",
+                    "ports/mimxrt10xx/sdk",
                     "ports/nrf/device",
                     "ports/nrf/bluetooth",
                     "ports/nrf/modules",

docs/index.rst

@@ -43,6 +43,7 @@ Full Table of Contents
 
    ../README
    ../CONTRIBUTING
+   ../BUILDING
    ../CODE_OF_CONDUCT
    ../license.rst
 

docs/shared_bindings_matrix.py

@@ -26,7 +26,7 @@ import os
 import re
 
 
-SUPPORTED_PORTS = ["atmel-samd", "nrf"]
+SUPPORTED_PORTS = ["atmel-samd", "nrf", "mimxrt10xx"]
 
 
 def parse_port_config(contents, chip_keyword=None):
@@ -185,7 +185,7 @@ def get_excluded_boards(base):
                     board_is_excluded = True
 
                 # check if module is specifically disabled for this board
-                re_pattern = "CIRCUITPY_{}\s=\s(\w)".format(module.upper())
+                re_pattern = r"CIRCUITPY_{}\s=\s(\w)".format(module.upper())
                 find_module = re.search(re_pattern, contents)
                 if not find_module:
                     if base[module]["default_value"].isdigit():
@@ -204,9 +204,7 @@ def get_excluded_boards(base):
                             ]):
                                 check_dependent_modules[module] = base[module]["default_value"]
                 else:
-                    if (find_module.group(1) == "0" and
+                    board_is_excluded = find_module.group(1) == "0"
-                        find_module.group(1) != base[module]["default_value"]):
-                            board_is_excluded = True
 
                 if board_is_excluded:
                     if board_chip in base[module]["excluded"]:

docs/supported_ports.rst

@@ -8,6 +8,7 @@ and ESP8266.
     :maxdepth: 2
 
     ../ports/atmel-samd/README
+    ../ports/mimxrt10xx/README
     ../ports/nrf/README
     ../ports/stm32f4/README
     ../ports/cxd56/README

drivers/wiznet5k/internet/dns/dns.c

@@ -52,7 +52,7 @@
 
 #include <string.h>
 #include <stdlib.h>
-#include "tick.h"
+#include "supervisor/shared/tick.h"
 
 //#include "Ethernet/socket.h"
 //#include "Internet/DNS/dns.h"
@@ -125,7 +125,7 @@ uint16_t DNS_MSGID;     // DNS message ID
 
 
 uint32_t HAL_GetTick(void) {
-    return ticks_ms;
+    return supervisor_ticks_ms32();
 }
 
 uint32_t hal_sys_tick;

extmod/machine_i2c.c

@@ -318,7 +318,7 @@ MP_DEFINE_CONST_FUN_OBJ_KW(machine_i2c_init_obj, 1, machine_i2c_obj_init);
 
 STATIC mp_obj_t machine_i2c_scan(mp_obj_t self_in) {
     mp_obj_base_t *self = MP_OBJ_TO_PTR(self_in);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     mp_obj_t list = mp_obj_new_list(0, NULL);
     // 7-bit addresses 0b0000xxx and 0b1111xxx are reserved
     for (int addr = 0x08; addr < 0x78; ++addr) {
@@ -333,7 +333,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(machine_i2c_scan_obj, machine_i2c_scan);
 
 STATIC mp_obj_t machine_i2c_start(mp_obj_t self_in) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(self_in);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     if (i2c_p->start == NULL) {
         mp_raise_msg(&mp_type_OSError, translate("I2C operation not supported"));
     }
@@ -347,7 +347,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(machine_i2c_start_obj, machine_i2c_start);
 
 STATIC mp_obj_t machine_i2c_stop(mp_obj_t self_in) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(self_in);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     if (i2c_p->stop == NULL) {
         mp_raise_msg(&mp_type_OSError, translate("I2C operation not supported"));
     }
@@ -361,7 +361,7 @@ MP_DEFINE_CONST_FUN_OBJ_1(machine_i2c_stop_obj, machine_i2c_stop);
 
 STATIC mp_obj_t machine_i2c_readinto(size_t n_args, const mp_obj_t *args) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(args[0]);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     if (i2c_p->read == NULL) {
         mp_raise_msg(&mp_type_OSError, translate("I2C operation not supported"));
     }
@@ -385,7 +385,7 @@ MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(machine_i2c_readinto_obj, 2, 3, machine_i2c_
 
 STATIC mp_obj_t machine_i2c_write(mp_obj_t self_in, mp_obj_t buf_in) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(self_in);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     if (i2c_p->write == NULL) {
         mp_raise_msg(&mp_type_OSError, translate("I2C operation not supported"));
     }
@@ -407,7 +407,7 @@ MP_DEFINE_CONST_FUN_OBJ_2(machine_i2c_write_obj, machine_i2c_write);
 
 STATIC mp_obj_t machine_i2c_readfrom(size_t n_args, const mp_obj_t *args) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(args[0]);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     mp_int_t addr = mp_obj_get_int(args[1]);
     vstr_t vstr;
     vstr_init_len(&vstr, mp_obj_get_int(args[2]));
@@ -422,7 +422,7 @@ MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(machine_i2c_readfrom_obj, 3, 4, machine_i2c_
 
 STATIC mp_obj_t machine_i2c_readfrom_into(size_t n_args, const mp_obj_t *args) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(args[0]);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     mp_int_t addr = mp_obj_get_int(args[1]);
     mp_buffer_info_t bufinfo;
     mp_get_buffer_raise(args[2], &bufinfo, MP_BUFFER_WRITE);
@@ -437,7 +437,7 @@ MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(machine_i2c_readfrom_into_obj, 3, 4, machine
 
 STATIC mp_obj_t machine_i2c_writeto(size_t n_args, const mp_obj_t *args) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(args[0]);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     mp_int_t addr = mp_obj_get_int(args[1]);
     mp_buffer_info_t bufinfo;
     mp_get_buffer_raise(args[2], &bufinfo, MP_BUFFER_READ);
@@ -453,7 +453,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(machine_i2c_writeto_obj, 3, 4, machin
 
 STATIC int read_mem(mp_obj_t self_in, uint16_t addr, uint32_t memaddr, uint8_t addrsize, uint8_t *buf, size_t len) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(self_in);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
     uint8_t memaddr_buf[4];
     size_t memaddr_len = 0;
     for (int16_t i = addrsize - 8; i >= 0; i -= 8) {
@@ -473,7 +473,7 @@ STATIC int read_mem(mp_obj_t self_in, uint16_t addr, uint32_t memaddr, uint8_t a
 
 STATIC int write_mem(mp_obj_t self_in, uint16_t addr, uint32_t memaddr, uint8_t addrsize, const uint8_t *buf, size_t len) {
     mp_obj_base_t *self = (mp_obj_base_t*)MP_OBJ_TO_PTR(self_in);
-    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)self->type->protocol;
+    mp_machine_i2c_p_t *i2c_p = (mp_machine_i2c_p_t*)mp_proto_get(self, QSTR_protocol_i2c);
 
     // need some memory to create the buffer to send; try to use stack if possible
     uint8_t buf2_stack[MAX_MEMADDR_SIZE + BUF_STACK_SIZE];
@@ -621,6 +621,7 @@ int mp_machine_soft_i2c_write(mp_obj_base_t *self_in, const uint8_t *src, size_t
 }
 
 STATIC const mp_machine_i2c_p_t mp_machine_soft_i2c_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_i2c)
     .start = (int(*)(mp_obj_base_t*))mp_hal_i2c_start,
     .stop = (int(*)(mp_obj_base_t*))mp_hal_i2c_stop,
     .read = mp_machine_soft_i2c_read,

extmod/machine_i2c.h

@@ -27,10 +27,12 @@
 #define MICROPY_INCLUDED_EXTMOD_MACHINE_I2C_H
 
 #include "py/obj.h"
+#include "py/proto.h"
 
 // I2C protocol
 // the first 4 methods can be NULL, meaning operation is not supported
 typedef struct _mp_machine_i2c_p_t {
+    MP_PROTOCOL_HEAD
     int (*start)(mp_obj_base_t *obj);
     int (*stop)(mp_obj_base_t *obj);
     int (*read)(mp_obj_base_t *obj, uint8_t *dest, size_t len, bool nack);

extmod/machine_pinbase.c

@@ -74,6 +74,7 @@ mp_uint_t pinbase_ioctl(mp_obj_t obj, mp_uint_t request, uintptr_t arg, int *err
 }
 
 STATIC const mp_pin_p_t pinbase_pin_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_pin)
     .ioctl = pinbase_ioctl,
 };
 

extmod/machine_signal.c

@@ -47,12 +47,7 @@ STATIC mp_obj_t signal_make_new(const mp_obj_type_t *type, size_t n_args, const
     bool invert = false;
 
     #if defined(MICROPY_PY_MACHINE_PIN_MAKE_NEW)
-    mp_pin_p_t *pin_p = NULL;
+    mp_pin_p_t *pin_p = (mp_pin_t*)mp_proto_get(QSTR_pin_protocol, pin);
-
-    if (MP_OBJ_IS_OBJ(pin)) {
-        mp_obj_base_t *pin_base = (mp_obj_base_t*)MP_OBJ_TO_PTR(args[0]);
-        pin_p = (mp_pin_p_t*)pin_base->type->protocol;
-    }
 
     if (pin_p == NULL) {
         // If first argument isn't a Pin-like object, we filter out "invert"
@@ -170,6 +165,7 @@ STATIC const mp_rom_map_elem_t signal_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(signal_locals_dict, signal_locals_dict_table);
 
 STATIC const mp_pin_p_t signal_pin_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_pin)
     .ioctl = signal_ioctl,
 };
 

extmod/machine_spi.c

@@ -67,7 +67,7 @@ mp_obj_t mp_machine_spi_make_new(const mp_obj_type_t *type, size_t n_args, const
 
 STATIC mp_obj_t machine_spi_init(size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) {
     mp_obj_base_t *s = (mp_obj_base_t*)MP_OBJ_TO_PTR(args[0]);
-    mp_machine_spi_p_t *spi_p = (mp_machine_spi_p_t*)s->type->protocol;
+    mp_machine_spi_p_t *spi_p = (mp_machine_spi_p_t*)mp_proto_get(QSTR_protocol_spi, s);
     spi_p->init(s, n_args - 1, args + 1, kw_args);
     return mp_const_none;
 }
@@ -75,7 +75,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(machine_spi_init_obj, 1, machine_spi_init);
 
 STATIC mp_obj_t machine_spi_deinit(mp_obj_t self) {
     mp_obj_base_t *s = (mp_obj_base_t*)MP_OBJ_TO_PTR(self);
-    mp_machine_spi_p_t *spi_p = (mp_machine_spi_p_t*)s->type->protocol;
+    mp_machine_spi_p_t *spi_p = (mp_machine_spi_p_t*)mp_proto_get(QSTR_protocol_spi, s);
     if (spi_p->deinit != NULL) {
         spi_p->deinit(s);
     }
@@ -85,7 +85,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_spi_deinit_obj, machine_spi_deinit);
 
 STATIC void mp_machine_spi_transfer(mp_obj_t self, size_t len, const void *src, void *dest) {
     mp_obj_base_t *s = (mp_obj_base_t*)MP_OBJ_TO_PTR(self);
-    mp_machine_spi_p_t *spi_p = (mp_machine_spi_p_t*)s->type->protocol;
+    mp_machine_spi_p_t *spi_p = (mp_machine_spi_p_t*)mp_proto_get(QSTR_protocol_spi, s);
     spi_p->transfer(s, len, src, dest);
 }
 
@@ -268,6 +268,7 @@ STATIC void mp_machine_soft_spi_transfer(mp_obj_base_t *self_in, size_t len, con
 }
 
 const mp_machine_spi_p_t mp_machine_soft_spi_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_spi)
     .init = mp_machine_soft_spi_init,
     .deinit = NULL,
     .transfer = mp_machine_soft_spi_transfer,

extmod/machine_spi.h

@@ -27,11 +27,13 @@
 #define MICROPY_INCLUDED_EXTMOD_MACHINE_SPI_H
 
 #include "py/obj.h"
+#include "py/proto.h"
 #include "py/mphal.h"
 #include "drivers/bus/spi.h"
 
 // SPI protocol
 typedef struct _mp_machine_spi_p_t {
+    MP_PROTOCOL_HEAD
     void (*init)(mp_obj_base_t *obj, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args);
     void (*deinit)(mp_obj_base_t *obj); // can be NULL
     void (*transfer)(mp_obj_base_t *obj, size_t len, const uint8_t *src, uint8_t *dest);

extmod/modbtree.c

@@ -247,7 +247,7 @@ STATIC mp_obj_t btree_iternext(mp_obj_t self_in) {
 }
 
 STATIC mp_obj_t btree_subscr(mp_obj_t self_in, mp_obj_t index, mp_obj_t value) {
-    mp_obj_btree_t *self = MP_OBJ_TO_PTR(self_in);
+    mp_obj_btree_t *self = mp_instance_cast_to_native_base(self_in, &btree_type);
     if (value == MP_OBJ_NULL) {
         // delete
         DBT key;

extmod/modframebuf.c

@@ -28,6 +28,7 @@
 #include <string.h>
 
 #include "py/runtime.h"
+#include "py/proto.h"
 
 #if MICROPY_PY_FRAMEBUF
 
@@ -46,6 +47,7 @@ typedef uint32_t (*getpixel_t)(const mp_obj_framebuf_t*, int, int);
 typedef void (*fill_rect_t)(const mp_obj_framebuf_t *, int, int, int, int, uint32_t);
 
 typedef struct _mp_framebuf_p_t {
+    MP_PROTOCOL_HEAD
     setpixel_t setpixel;
     getpixel_t getpixel;
     fill_rect_t fill_rect;
@@ -227,13 +229,13 @@ STATIC void gs8_fill_rect(const mp_obj_framebuf_t *fb, int x, int y, int w, int
 }
 
 STATIC mp_framebuf_p_t formats[] = {
-    [FRAMEBUF_MVLSB] = {mvlsb_setpixel, mvlsb_getpixel, mvlsb_fill_rect},
+    [FRAMEBUF_MVLSB] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) mvlsb_setpixel, mvlsb_getpixel, mvlsb_fill_rect},
-    [FRAMEBUF_RGB565] = {rgb565_setpixel, rgb565_getpixel, rgb565_fill_rect},
+    [FRAMEBUF_RGB565] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) rgb565_setpixel, rgb565_getpixel, rgb565_fill_rect},
-    [FRAMEBUF_GS2_HMSB] = {gs2_hmsb_setpixel, gs2_hmsb_getpixel, gs2_hmsb_fill_rect},
+    [FRAMEBUF_GS2_HMSB] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) gs2_hmsb_setpixel, gs2_hmsb_getpixel, gs2_hmsb_fill_rect},
-    [FRAMEBUF_GS4_HMSB] = {gs4_hmsb_setpixel, gs4_hmsb_getpixel, gs4_hmsb_fill_rect},
+    [FRAMEBUF_GS4_HMSB] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) gs4_hmsb_setpixel, gs4_hmsb_getpixel, gs4_hmsb_fill_rect},
-    [FRAMEBUF_GS8] = {gs8_setpixel, gs8_getpixel, gs8_fill_rect},
+    [FRAMEBUF_GS8] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) gs8_setpixel, gs8_getpixel, gs8_fill_rect},
-    [FRAMEBUF_MHLSB] = {mono_horiz_setpixel, mono_horiz_getpixel, mono_horiz_fill_rect},
+    [FRAMEBUF_MHLSB] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) mono_horiz_setpixel, mono_horiz_getpixel, mono_horiz_fill_rect},
-    [FRAMEBUF_MHMSB] = {mono_horiz_setpixel, mono_horiz_getpixel, mono_horiz_fill_rect},
+    [FRAMEBUF_MHMSB] = {MP_PROTO_IMPLEMENT(MP_QSTR_protocol_framebuf) mono_horiz_setpixel, mono_horiz_getpixel, mono_horiz_fill_rect},
 };
 
 static inline void setpixel(const mp_obj_framebuf_t *fb, int x, int y, uint32_t col) {

extmod/modlwip.c

@@ -1261,6 +1261,7 @@ STATIC const mp_rom_map_elem_t lwip_socket_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(lwip_socket_locals_dict, lwip_socket_locals_dict_table);
 
 STATIC const mp_stream_p_t lwip_socket_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = lwip_socket_read,
     .write = lwip_socket_write,
     .ioctl = lwip_socket_ioctl,

extmod/moductypes.c

@@ -518,8 +518,8 @@ STATIC void uctypes_struct_attr(mp_obj_t self_in, qstr attr, mp_obj_t *dest) {
     }
 }
 
-STATIC mp_obj_t uctypes_struct_subscr(mp_obj_t self_in, mp_obj_t index_in, mp_obj_t value) {
+STATIC mp_obj_t uctypes_struct_subscr(mp_obj_t base_in, mp_obj_t index_in, mp_obj_t value) {
-    mp_obj_uctypes_struct_t *self = MP_OBJ_TO_PTR(self_in);
+    mp_obj_uctypes_struct_t *self = mp_instance_cast_to_native_base(base_in, &uctypes_struct_type);
 
     if (value == MP_OBJ_NULL) {
         // delete

extmod/modussl_axtls.c

@@ -221,6 +221,7 @@ STATIC const mp_rom_map_elem_t ussl_socket_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(ussl_socket_locals_dict, ussl_socket_locals_dict_table);
 
 STATIC const mp_stream_p_t ussl_socket_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = socket_read,
     .write = socket_write,
     .ioctl = socket_ioctl,

extmod/modussl_mbedtls.c

@@ -305,6 +305,7 @@ STATIC const mp_rom_map_elem_t ussl_socket_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(ussl_socket_locals_dict, ussl_socket_locals_dict_table);
 
 STATIC const mp_stream_p_t ussl_socket_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = socket_read,
     .write = socket_write,
     .ioctl = socket_ioctl,

extmod/moduzlib.c

@@ -134,6 +134,7 @@ STATIC const mp_rom_map_elem_t decompio_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(decompio_locals_dict, decompio_locals_dict_table);
 
 STATIC const mp_stream_p_t decompio_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = decompio_read,
 };
 

extmod/modwebrepl.c

@@ -331,6 +331,7 @@ STATIC const mp_rom_map_elem_t webrepl_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(webrepl_locals_dict, webrepl_locals_dict_table);
 
 STATIC const mp_stream_p_t webrepl_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = webrepl_read,
     .write = webrepl_write,
     .ioctl = webrepl_ioctl,

extmod/modwebsocket.c

@@ -286,6 +286,7 @@ STATIC const mp_rom_map_elem_t websocket_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(websocket_locals_dict, websocket_locals_dict_table);
 
 STATIC const mp_stream_p_t websocket_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = websocket_read,
     .write = websocket_write,
     .ioctl = websocket_ioctl,

extmod/vfs.c

@@ -126,7 +126,7 @@ mp_import_stat_t mp_vfs_import_stat(const char *path) {
     }
 
     // If the mounted object has the VFS protocol, call its import_stat helper
-    const mp_vfs_proto_t *proto = mp_obj_get_type(vfs->obj)->protocol;
+    const mp_vfs_proto_t *proto = (mp_vfs_proto_t*)mp_proto_get(MP_QSTR_protocol_vfs, vfs->obj);
     if (proto != NULL) {
         return proto->import_stat(MP_OBJ_TO_PTR(vfs->obj), path_out);
     }

extmod/vfs.h

@@ -28,6 +28,7 @@
 
 #include "py/lexer.h"
 #include "py/obj.h"
+#include "py/proto.h"
 
 // return values of mp_vfs_lookup_path
 // ROOT is 0 so that the default current directory is the root directory
@@ -47,6 +48,7 @@
 
 // At the moment the VFS protocol just has import_stat, but could be extended to other methods
 typedef struct _mp_vfs_proto_t {
+    MP_PROTOCOL_HEAD
     mp_import_stat_t (*import_stat)(void *self, const char *path);
 } mp_vfs_proto_t;
 

extmod/vfs_fat.c

@@ -488,6 +488,7 @@ STATIC const mp_rom_map_elem_t fat_vfs_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(fat_vfs_locals_dict, fat_vfs_locals_dict_table);
 
 STATIC const mp_vfs_proto_t fat_vfs_proto = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_vfs)
     .import_stat = fat_vfs_import_stat,
 };
 

extmod/vfs_fat_file.c

@@ -254,6 +254,7 @@ STATIC MP_DEFINE_CONST_DICT(rawfile_locals_dict, rawfile_locals_dict_table);
 
 #if MICROPY_PY_IO_FILEIO
 STATIC const mp_stream_p_t fileio_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = file_obj_read,
     .write = file_obj_write,
     .ioctl = file_obj_ioctl,
@@ -272,6 +273,7 @@ const mp_obj_type_t mp_type_vfs_fat_fileio = {
 #endif
 
 STATIC const mp_stream_p_t textio_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = file_obj_read,
     .write = file_obj_write,
     .ioctl = file_obj_ioctl,

extmod/vfs_posix.c

@@ -350,6 +350,7 @@ STATIC const mp_rom_map_elem_t vfs_posix_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(vfs_posix_locals_dict, vfs_posix_locals_dict_table);
 
 STATIC const mp_vfs_proto_t vfs_posix_proto = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_vfs)
     .import_stat = mp_vfs_posix_import_stat,
 };
 

extmod/vfs_posix_file.c

@@ -220,6 +220,7 @@ STATIC MP_DEFINE_CONST_DICT(rawfile_locals_dict, rawfile_locals_dict_table);
 
 #if MICROPY_PY_IO_FILEIO
 STATIC const mp_stream_p_t fileio_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = vfs_posix_file_read,
     .write = vfs_posix_file_write,
     .ioctl = vfs_posix_file_ioctl,
@@ -238,6 +239,7 @@ const mp_obj_type_t mp_type_vfs_posix_fileio = {
 #endif
 
 STATIC const mp_stream_p_t textio_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = vfs_posix_file_read,
     .write = vfs_posix_file_write,
     .ioctl = vfs_posix_file_ioctl,

extmod/virtpin.c

@@ -25,15 +25,16 @@
  */
 
 #include "extmod/virtpin.h"
+#include "py/proto.h"
 
 int mp_virtual_pin_read(mp_obj_t pin) {
     mp_obj_base_t* s = (mp_obj_base_t*)MP_OBJ_TO_PTR(pin);
-    mp_pin_p_t *pin_p = (mp_pin_p_t*)s->type->protocol;
+    const mp_pin_p_t *pin_p = mp_proto_get(MP_QSTR_protocol_pin, s);
     return pin_p->ioctl(pin, MP_PIN_READ, 0, NULL);
 }
 
 void mp_virtual_pin_write(mp_obj_t pin, int value) {
     mp_obj_base_t* s = (mp_obj_base_t*)MP_OBJ_TO_PTR(pin);
-    mp_pin_p_t *pin_p = (mp_pin_p_t*)s->type->protocol;
+    const mp_pin_p_t *pin_p = mp_proto_get(MP_QSTR_protocol_pin, s);
     pin_p->ioctl(pin, MP_PIN_WRITE, value, NULL);
 }

extmod/virtpin.h

@@ -27,6 +27,7 @@
 #define MICROPY_INCLUDED_EXTMOD_VIRTPIN_H
 
 #include "py/obj.h"
+#include "py/proto.h"
 
 #define MP_PIN_READ   (1)
 #define MP_PIN_WRITE  (2)
@@ -35,6 +36,7 @@
 
 // Pin protocol
 typedef struct _mp_pin_p_t {
+    MP_PROTOCOL_HEAD
     mp_uint_t (*ioctl)(mp_obj_t obj, mp_uint_t request, uintptr_t arg, int *errcode);
 } mp_pin_p_t;
 

frozen/Adafruit_CircuitPython_BusDevice

@@ -1 +1 @@
-Subproject commit 52d87bd7e571af66ecb57ee32b5af92531134150
+Subproject commit 805d41a021c70df7609da772a6f6131810e5d6ba

frozen/Adafruit_CircuitPython_CircuitPlayground

@@ -1 +1 @@
-Subproject commit d87ea261c40ecbc6d893d72d337beefbea1cf932
+Subproject commit 82ba9e40dfff41fdc0541636afde4936c930d86c

frozen/Adafruit_CircuitPython_Crickit

@@ -1 +1 @@
-Subproject commit a6100fb5d867c7f4980f071119bfa7e0a76e1d47
+Subproject commit 5534662902a223ac8562e6f999d6359e4c17dab1

frozen/Adafruit_CircuitPython_DotStar

@@ -1 +1 @@
-Subproject commit 409e90902ac49720c4add985e8e1a1660bbe63a0
+Subproject commit 01e89a8437c78b62d4d655c745ded57e26dc747a

frozen/Adafruit_CircuitPython_HID

@@ -1 +1 @@
-Subproject commit 89faee0eb08a6855e14f117c514fecf2dd90769d
+Subproject commit 2d1dce6ad6ca7e091fd8b5c3f102693c24af8b88

frozen/Adafruit_CircuitPython_Motor

@@ -1 +1 @@
-Subproject commit ddc74844983b35b027bd45091c7b8bb3c8d7a2d1
+Subproject commit f69fc9b47fa25ba1414eb3d5c82f05013280c0d2

frozen/Adafruit_CircuitPython_NeoPixel

@@ -1 +1 @@
-Subproject commit c0bdd8b10383725ee9293f5d88fb8d47eb1272bd
+Subproject commit ff99d55115f81899902c2c4a84fdfbea9ae83823

frozen/Adafruit_CircuitPython_SD

@@ -0,0 +1 @@
+Subproject commit dd0fe8530a2dcc64ac95bb3e116af2158dcd7cd2

frozen/circuitpython-stage

@@ -1 +1 @@
-Subproject commit c1d8e1d645cbc83d857e12cf4ba67549b988a4e7
+Subproject commit 8d5cc384058b1cb296aaeab86fb8405042d547ed

lib/mp3

@@ -0,0 +1 @@
+Subproject commit c3c664bf4db6a36d11808dfcbb5dbf7cff1715b8

lib/oofatfs/ff.c

@@ -3382,7 +3382,11 @@ FRESULT f_read (
             if (!sect) ABORT(fs, FR_INT_ERR);
             sect += csect;
             cc = btr / SS(fs);                  /* When remaining bytes >= sector size, */
-            if (cc) {                           /* Read maximum contiguous sectors directly */
+            if (cc
+#if _FS_DISK_READ_ALIGNED
+                    && (((int)rbuff & 3) == 0)
+#endif
+                    ) {/* Read maximum contiguous sectors directly */
                 if (csect + cc > fs->csize) {   /* Clip at cluster boundary */
                     cc = fs->csize - csect;
                 }

lib/oofatfs/ffconf.h

@@ -343,6 +343,12 @@
 /  SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be
 /  included somewhere in the scope of ff.h. */
 
+// Set to nonzero if buffers passed to disk_read have a word alignment
+// restriction
+#ifndef _FS_DISK_READ_ALIGNED
+#define _FS_DISK_READ_ALIGNED 0
+#endif
+
 /* #include <windows.h> // O/S definitions  */
 
 

lib/tinyusb

@@ -1 +1 @@
-Subproject commit e413c9efa303d70de019a91aa415384fe80ca78f
+Subproject commit dda4c9a94b509238faa7b5ab5b9464c1d2e63ff0

lib/utils/sys_stdio_mphal.c

@@ -123,6 +123,7 @@ STATIC const mp_rom_map_elem_t stdio_locals_dict_table[] = {
 STATIC MP_DEFINE_CONST_DICT(stdio_locals_dict, stdio_locals_dict_table);
 
 STATIC const mp_stream_p_t stdio_obj_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = stdio_read,
     .write = stdio_write,
     .ioctl = stdio_ioctl,
@@ -158,6 +159,7 @@ STATIC mp_uint_t stdio_buffer_write(mp_obj_t self_in, const void *buf, mp_uint_t
 }
 
 STATIC const mp_stream_p_t stdio_buffer_obj_stream_p = {
+    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
     .read = stdio_buffer_read,
     .write = stdio_buffer_write,
     .is_text = false,

locale/ID.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 #, fuzzy
 msgid "%q must be >= 1"
 msgstr "buffers harus mempunyai panjang yang sama"
@@ -120,6 +134,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' integer 0x%x tidak cukup didalam mask 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -290,7 +308,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -360,6 +378,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
@@ -379,11 +401,6 @@ msgstr ""
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -402,6 +419,10 @@ msgstr "Tidak bisa mendapatkan pull pada saat mode output"
 msgid "Cannot get temperature"
 msgstr "Tidak bisa mendapatkan temperatur. status: 0x%02x"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@@ -450,6 +471,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@@ -488,25 +519,30 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
 
-#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Couldn't allocate first buffer"
+msgid "Couldn't allocate decoder"
 msgstr ""
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate first buffer"
+msgstr ""
+
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -565,10 +601,14 @@ msgid "Expected a %q"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -587,11 +627,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -601,15 +636,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Gagal untuk mengalokasikan buffer RX"
@@ -620,10 +646,6 @@ msgstr "Gagal untuk mengalokasikan buffer RX"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -632,118 +654,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-#, fuzzy
-msgid "Failed to discover services"
-msgstr "Gagal untuk menemukan layanan, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get local address"
-msgstr "Gagal untuk mendapatkan alamat lokal, error: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get softdevice state"
-msgstr "Gagal untuk mendapatkan status softdevice, error: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, fuzzy, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Gagal untuk membaca nilai atribut, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Gagal untuk menulis nilai gatts, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, fuzzy, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Gagal untuk menambahkan Vendor Spesific UUID, status: 0x%08lX"
-
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Gagal untuk melakukan scanning, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Gagal untuk menulis nilai atribut, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Gagal untuk menulis nilai gatts, status: 0x%08lX"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -784,6 +715,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -810,6 +749,10 @@ msgstr ""
 msgid "Invalid buffer size"
 msgstr "Ukuran buffer tidak valid"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -908,13 +851,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@@ -929,11 +865,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
@@ -944,6 +880,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1002,6 +942,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -1039,10 +983,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1138,7 +1078,7 @@ msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 "Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA atau SCL membutuhkan pull up"
 
@@ -1147,7 +1087,6 @@ msgid "Sample rate must be positive"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Nilai sampel terlalu tinggi. Nilai harus kurang dari %d"
@@ -1185,10 +1124,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1198,21 +1134,11 @@ msgid ""
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-#, fuzzy
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
-"memberikan daya\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1246,10 +1172,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Untuk keluar, silahkan reset board tanpa "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Terlalu banyak channel dalam sampel"
@@ -1323,11 +1245,36 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate tidak didukung"
@@ -1383,13 +1330,13 @@ msgstr ""
 "\n"
 "Untuk menampilkan modul built-in silahkan ketik `help(\"modules\")`.\n"
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-#, fuzzy
+msgid "Writes not supported on Characteristic"
-msgid ""
+msgstr ""
-"You are running in safe mode which means something unanticipated happened.\n"
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang "
-"sangat buruk telah terjadi.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1526,8 +1473,7 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1854,7 +1800,7 @@ msgstr "argumen keyword ekstra telah diberikan"
 msgid "extra positional arguments given"
 msgstr "argumen posisi ekstra telah diberikan"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -2207,7 +2153,7 @@ msgstr "tidak ada modul yang bernama '%q'"
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr ""
 
@@ -2389,10 +2335,6 @@ msgstr "antrian meluap (overflow)"
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr ""
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "relative import"
@@ -2533,12 +2475,8 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2699,10 +2637,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""
@@ -2765,7 +2699,7 @@ msgstr ""
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Gagal untuk menambahkan karakteristik, status: 0x%08lX"
 
@@ -2773,7 +2707,7 @@ msgstr ""
 #~ msgid "Failed to add service"
 #~ msgstr "Gagal untuk menambahkan layanan, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Gagal untuk menambahkan layanan, status: 0x%08lX"
 
@@ -2789,7 +2723,7 @@ msgstr ""
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Gagal untuk melanjutkan scanning, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Gagal untuk melanjutkan scanning, status: 0x%08lX"
 
@@ -2797,14 +2731,38 @@ msgstr ""
 #~ msgid "Failed to create mutex"
 #~ msgstr "Gagal untuk membuat mutex, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to discover services"
+#~ msgstr "Gagal untuk menemukan layanan, status: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to get local address"
+#~ msgstr "Gagal untuk mendapatkan alamat lokal, error: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Gagal untuk mendapatkan status softdevice, error: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "Gagal untuk melaporkan nilai atribut, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Gagal untuk membaca nilai atribut, status: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "Gagal untuk membaca nilai atribut, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Gagal untuk menulis nilai gatts, status: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Gagal untuk menambahkan Vendor Spesific UUID, status: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to release mutex"
 #~ msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
@@ -2813,7 +2771,7 @@ msgstr ""
 #~ msgid "Failed to start advertising"
 #~ msgstr "Gagal untuk memulai advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Gagal untuk memulai advertisement, status: 0x%08lX"
 
@@ -2821,14 +2779,26 @@ msgstr ""
 #~ msgid "Failed to start scanning"
 #~ msgstr "Gagal untuk melakukan scanning, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Gagal untuk melakukan scanning, status: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Gagal untuk memberhentikan advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Gagal untuk memberhentikan advertisement, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Gagal untuk menulis nilai atribut, status: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Gagal untuk menulis nilai gatts, status: 0x%08lX"
+
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 tidak mendukung pull up"
 
@@ -2878,10 +2848,23 @@ msgstr ""
 #~ msgid "STA required"
 #~ msgstr "STA dibutuhkan"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Dukungan soft device, id: 0x%08lX, pc: 0x%08l"
 
+#, fuzzy
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
+#~ "memberikan daya\n"
+
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Untuk keluar, silahkan reset board tanpa "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) tidak ada"
 
@@ -2899,6 +2882,14 @@ msgstr ""
 #~ "Gunakan esptool untuk menghapus flash dan upload ulang Python sebagai "
 #~ "gantinya"
 
+#, fuzzy
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang "
+#~ "sangat buruk telah terjadi.\n"
+
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[addrinfo error %d]"
 

locale/circuitpython.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-13 18:15-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr ""
 
@@ -119,6 +133,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr ""
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -288,7 +306,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -356,6 +374,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -374,11 +396,6 @@ msgstr ""
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -396,6 +413,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@@ -440,6 +461,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@@ -478,25 +509,30 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3Decoder.c
-msgid "Couldn't allocate first buffer"
+msgid "Couldn't allocate decoder"
 msgstr ""
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3Decoder.c
+msgid "Couldn't allocate first buffer"
+msgstr ""
+
+#: shared-module/audiomp3/MP3Decoder.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate second buffer"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -554,10 +590,14 @@ msgid "Expected a %q"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -576,29 +616,15 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
 
-#: ports/nrf/sd_mutex.c
+#: ports/nrf/sd.c ports/nrf/sd_mutex.c
 #, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr ""
@@ -609,10 +635,6 @@ msgstr ""
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -621,115 +643,23 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3Decoder.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
+#: ports/nrf/sd.c ports/nrf/sd_mutex.c
-msgid "Failed to discover services"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/sd_mutex.c
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
 msgstr ""
 
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-msgid "Flash write failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -770,6 +700,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -796,6 +734,10 @@ msgstr ""
 msgid "Invalid buffer size"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -894,13 +836,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@@ -915,11 +850,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
@@ -930,6 +865,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -988,6 +927,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1024,10 +967,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1119,7 +1058,7 @@ msgstr ""
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1128,7 +1067,6 @@ msgid "Sample rate must be positive"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr ""
@@ -1166,10 +1104,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1180,18 +1115,11 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@@ -1224,10 +1152,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@@ -1301,11 +1225,36 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
@@ -1354,9 +1303,12 @@ msgid ""
 "To list built-in modules please do `help(\"modules\")`.\n"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Writes not supported on Characteristic"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
-"You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1493,8 +1445,7 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1821,7 +1772,7 @@ msgstr ""
 msgid "extra positional arguments given"
 msgstr ""
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -2174,7 +2125,7 @@ msgstr ""
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr ""
 
@@ -2355,10 +2306,6 @@ msgstr ""
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr ""
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2499,12 +2446,8 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2664,10 +2607,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""

locale/de_DE.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Pascal Deneaux\n"
 "Language-Team: Sebastian Plamauer, Pascal Deneaux\n"
@@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Der Code wurde ausgeführt. Warte auf reload.\n"
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Datei \"%q\""
@@ -55,7 +68,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "%q Indizes müssen ganze Zahlen sein, nicht %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr "%q muss >= 1 sein"
 
@@ -121,6 +135,10 @@ msgstr "'%s' integer %d ist nicht im Bereich %d..%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' Integer 0x%x passt nicht in Maske 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -290,7 +308,7 @@ msgid "Array values should be single bytes."
 msgstr "Array-Werte sollten aus Einzelbytes bestehen."
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -360,6 +378,10 @@ msgstr "Die Pufferlänge %d ist zu groß. Sie muss kleiner als %d sein."
 msgid "Buffer must be at least length 1"
 msgstr "Der Puffer muss eine Mindestenslänge von 1 haben"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -378,11 +400,6 @@ msgstr "Ein Bytes kann nur Werte zwischen 0 und 255 annehmen."
 msgid "Call super().__init__() before accessing native object."
 msgstr "Rufe super().__init__() vor dem Zugriff auf ein natives Objekt auf."
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr "Kann dotstar nicht mit %s verwenden"
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -400,6 +417,10 @@ msgstr "Pull up im Ausgabemodus nicht möglich"
 msgid "Cannot get temperature"
 msgstr "Kann Temperatur nicht holen"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Kann nicht beite Kanäle auf dem gleichen Pin ausgeben"
@@ -444,6 +465,16 @@ msgstr "Kann nicht ohne MOSI-Pin schreiben."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Schreiben von CharacteristicBuffer ist nicht vorgesehen"
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Clock pin init fehlgeschlagen."
@@ -482,26 +513,31 @@ msgstr "Beschädigte .mpy Datei"
 msgid "Corrupt raw code"
 msgstr "Beschädigter raw code"
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr "Konnte ble_uuid nicht decodieren. Status: 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Konnte first buffer nicht zuteilen"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Konnte second buffer nicht zuteilen"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Absturz in HardFault_Handler.\n"
+msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -558,10 +594,14 @@ msgid "Expected a %q"
 msgstr "Erwartet ein(e) %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr "Characteristic wird erwartet"
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr "Ein Service wird erwartet"
@@ -580,11 +620,6 @@ msgstr "Erwartet eine Adresse"
 msgid "Expected tuple of length %d, got %d"
 msgstr "Habe ein Tupel der Länge %d erwartet aber %d erhalten"
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Kommando nicht gesendet."
@@ -594,15 +629,6 @@ msgstr "Kommando nicht gesendet."
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Mutex konnte nicht akquiriert werden. Status: 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr "Deskriptor konnte nicht hinzugefügt werden. Status: 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Konnte keinen RX Buffer allozieren"
@@ -613,10 +639,6 @@ msgstr "Konnte keinen RX Buffer allozieren"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Konnte keine RX Buffer mit %d allozieren"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -625,118 +647,32 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr "Verbindung nicht erfolgreich: timeout"
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to discover services"
-msgstr "Es konnten keine Dienste gefunden werden"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr "Lokale Adresse konnte nicht abgerufen werden"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr "Fehler beim Abrufen des Softdevice-Status"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr "Koppeln fehlgeschlagen"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Kann CCCD value nicht lesen. Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr "Kann Attributwert nicht lesen, Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "gatts value konnte nicht gelesen werden. Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Kann keine herstellerspezifische UUID hinzufügen. Status: 0x%04x"
-
 #: ports/nrf/sd_mutex.c
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Mutex konnte nicht freigegeben werden. Status: 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr "Verbindung konnte nicht hergestellt werden. Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Der Scanvorgang kann nicht gestartet werden. Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr "Konnte CCCD nicht schreiben, Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Kann den Attributwert nicht schreiben. Status: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "gatts value konnte nicht geschrieben werden. Status: 0x%04x"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Datei existiert"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
-msgstr "Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme angehalten."
+msgstr ""
+"Die aufgezeichnete Frequenz liegt über der Leistungsgrenze. Aufnahme "
+"angehalten."
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
 #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
@@ -776,6 +712,14 @@ msgstr "Inkorrekte Puffergröße"
 msgid "Input/output error"
 msgstr "Eingabe-/Ausgabefehler"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -802,6 +746,10 @@ msgstr "Ungültige Bits pro Wert"
 msgid "Invalid buffer size"
 msgstr "Ungültige Puffergröße"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Ungültiger Aufnahmezeitraum. Gültiger Bereich: 1 - 500"
@@ -900,17 +848,6 @@ msgstr "Länge muss ein int sein"
 msgid "Length must be non-negative"
 msgstr "Länge darf nicht negativ sein"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-"Sieht aus, als wäre der CircuitPython-Kernel-Code abgestürzt. Uups!\n"
-"Bitte melde das Problem unter https://github.com/adafruit/circuitpython/"
-"issues\n"
-"mit dem Inhalt deines CIRCUITPY-Laufwerks und dieser Nachricht:\n"
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "MISO pin Initialisierung fehlgeschlagen"
@@ -925,14 +862,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Maximaler x-Wert beim Spiegeln ist %d"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
-"MicroPython-NLR-Sprung ist fehlgeschlagen. Wahrscheinlich "
-"Speicherbeschädigung.\n"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Schwerwiegender MicroPython-Fehler\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -943,6 +878,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr "Muss eine %q Unterklasse sein."
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr "Kein CCCD für diese Charakteristik"
@@ -1001,6 +940,10 @@ msgstr "Kein Speicherplatz mehr verfügbar auf dem Gerät"
 msgid "No such file/directory"
 msgstr "Keine solche Datei/Verzeichnis"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1043,10 +986,6 @@ msgstr ""
 "Nur monochrome, indizierte 4bpp oder 8bpp, und 16bpp oder größere BMPs "
 "unterstützt: %d bpp wurden gegeben"
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Oversample muss ein Vielfaches von 8 sein."
@@ -1140,7 +1079,7 @@ msgstr "Sicherheitsmodus aktiv! Automatisches Neuladen ist deaktiviert.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Sicherheitsmodus aktiv! Gespeicherter Code wird nicht ausgeführt\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA oder SCL brauchen pull up"
 
@@ -1149,7 +1088,6 @@ msgid "Sample rate must be positive"
 msgstr "Abtastrate muss positiv sein"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Abtastrate zu hoch. Wert muss unter %d liegen"
@@ -1187,17 +1125,8 @@ msgstr "Stream fehlt readinto() oder write() Methode."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
-"Der CircuitPython-Heap war beschädigt, weil der Stack zu klein war.\n"
-"Bitte erhöhe die stack size limits und drücke die Reset-Taste (nach Auswurf "
-"des CIRCUITPY-Laufwerks)\n"
-"Wenn du den Stack nicht geändert hast, melde bitte das Problem unter https://"
-"github.com/adafruit/circuitpython/issues\n"
-"mit dem Inhalt deines CIRCUITPY-Laufwerks.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1209,23 +1138,10 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"Die Stromversorgung des Mikrocontrollers ist eingebrochen. Stelle sicher, "
-"dass deine Stromversorgung genug Leistung für die gesamte Schaltung zur "
-"Verfügung stellt und drücke die Reset-Taste (nach Auswurf des CIRCUITPY-"
-"Laufwerks)\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-"Die Reset-Taste wurde beim Booten von CircuitPython gedrückt. Drücke sie "
-"erneut um den abgesicherten Modus zu verlassen. \n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1259,10 +1175,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Zum beenden, resette bitte das board ohne "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Zu viele Kanäle im sample"
@@ -1336,6 +1248,25 @@ msgstr "Schreiben in nvm nicht möglich."
 msgid "Unexpected nrfx uuid type"
 msgstr "Unerwarteter nrfx uuid-Typ"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
@@ -1343,6 +1274,12 @@ msgstr ""
 "Nicht übereinstimmende Anzahl von Elementen auf der rechten Seite (erwartet "
 "%d, %d erhalten)."
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate wird nicht unterstützt"
@@ -1398,12 +1335,13 @@ msgstr ""
 "Um die integrierten Module aufzulisten, führe bitte `help(\"modules\")` "
 "aus.\n"
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-msgid ""
+msgid "Writes not supported on Characteristic"
-"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Sie laufen im abgesicherten Modus, was bedeutet, dass etwas Unerwartetes "
-"passiert ist.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1539,9 +1477,8 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgstr ""
-msgstr "byteorder ist keine Instanz von ByteOrder (%s erhalten)"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
@@ -1868,7 +1805,7 @@ msgstr "Es wurden zusätzliche Keyword-Argumente angegeben"
 msgid "extra positional arguments given"
 msgstr "Es wurden zusätzliche Argumente ohne Keyword angegeben"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr "Die Datei muss eine im Byte-Modus geöffnete Datei sein"
@@ -2228,7 +2165,7 @@ msgstr "Kein Modul mit dem Namen '%q'"
 msgid "no reset pin available"
 msgstr "kein Reset Pin verfügbar"
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "kein solches Attribut"
 
@@ -2411,10 +2348,6 @@ msgstr "Warteschlangenüberlauf"
 msgid "rawbuf is not the same size as buf"
 msgstr "rawbuf hat nicht die gleiche Größe wie buf"
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr "Readonly-Attribut"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "relativer Import"
@@ -2558,12 +2491,8 @@ msgstr "threshold muss im Intervall 0-65536 liegen"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2727,10 +2656,6 @@ msgstr "value_count muss größer als 0 sein"
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr "write_args muss eine Liste, ein Tupel oder None sein"
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "falsche Anzahl an Argumenten"
@@ -2764,6 +2689,10 @@ msgstr ""
 #~ msgid "C-level assert"
 #~ msgstr "C-Level Assert"
 
+#, c-format
+#~ msgid "Can not use dotstar with %s"
+#~ msgstr "Kann dotstar nicht mit %s verwenden"
+
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Im Central mode können Dienste nicht hinzugefügt werden"
 
@@ -2794,6 +2723,12 @@ msgstr ""
 #~ msgid "Characteristic already in use by another Service."
 #~ msgstr "Characteristic wird bereits von einem anderen Dienst verwendet."
 
+#~ msgid "Could not decode ble_uuid, err 0x%04x"
+#~ msgstr "Konnte ble_uuid nicht decodieren. Status: 0x%04x"
+
+#~ msgid "Crash into the HardFault_Handler.\n"
+#~ msgstr "Absturz in HardFault_Handler.\n"
+
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Daten sind zu groß für das advertisement packet"
 
@@ -2816,14 +2751,15 @@ msgstr ""
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Akquirieren des Mutex gescheitert"
 
-#, c-format
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Hinzufügen des Characteristic ist gescheitert. Status: 0x%04x"
 
+#~ msgid "Failed to add descriptor, err 0x%04x"
+#~ msgstr "Deskriptor konnte nicht hinzugefügt werden. Status: 0x%04x"
+
 #~ msgid "Failed to add service"
 #~ msgstr "Dienst konnte nicht hinzugefügt werden"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Dienst konnte nicht hinzugefügt werden. Status: 0x%04x"
 
@@ -2836,47 +2772,81 @@ msgstr ""
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Der Scanvorgang kann nicht fortgesetzt werden"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Der Scanvorgang kann nicht fortgesetzt werden. Status: 0x%04x"
 
 #~ msgid "Failed to create mutex"
 #~ msgstr "Erstellen des Mutex ist fehlgeschlagen"
 
+#~ msgid "Failed to discover services"
+#~ msgstr "Es konnten keine Dienste gefunden werden"
+
+#~ msgid "Failed to get local address"
+#~ msgstr "Lokale Adresse konnte nicht abgerufen werden"
+
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Fehler beim Abrufen des Softdevice-Status"
+
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "Kann den Attributwert nicht mitteilen. Status: 0x%04x"
 
+#~ msgid "Failed to pair"
+#~ msgstr "Koppeln fehlgeschlagen"
+
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Kann CCCD value nicht lesen. Status: 0x%04x"
+
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "Kann den Attributwert nicht lesen. Status: 0x%04x"
 
+#~ msgid "Failed to read attribute value, err 0x%04x"
+#~ msgstr "Kann Attributwert nicht lesen, Status: 0x%04x"
+
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "gatts value konnte nicht gelesen werden. Status: 0x%04x"
+
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Kann keine herstellerspezifische UUID hinzufügen. Status: 0x%04x"
+
 #~ msgid "Failed to release mutex"
 #~ msgstr "Loslassen des Mutex gescheitert"
 
-#, c-format
 #~ msgid "Failed to set device name, err 0x%04x"
 #~ msgstr "Gerätename konnte nicht gesetzt werden, Status: 0x%04x"
 
 #~ msgid "Failed to start advertising"
 #~ msgstr "Kann advertisement nicht starten"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Kann advertisement nicht starten. Status: 0x%04x"
 
-#, c-format
+#~ msgid "Failed to start connecting, error 0x%04x"
+#~ msgstr "Verbindung konnte nicht hergestellt werden. Status: 0x%04x"
+
 #~ msgid "Failed to start pairing, error 0x%04x"
 #~ msgstr "Starten des Koppelns fehlgeschlagen, Status: 0x%04x"
 
 #~ msgid "Failed to start scanning"
 #~ msgstr "Der Scanvorgang kann nicht gestartet werden"
 
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Der Scanvorgang kann nicht gestartet werden. Status: 0x%04x"
+
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Kann advertisement nicht stoppen"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Kann advertisement nicht stoppen. Status: 0x%04x"
 
+#~ msgid "Failed to write CCCD, err 0x%04x"
+#~ msgstr "Konnte CCCD nicht schreiben, Status: 0x%04x"
+
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Kann den Attributwert nicht schreiben. Status: 0x%04x"
+
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "gatts value konnte nicht geschrieben werden. Status: 0x%04x"
+
 #~ msgid "Function requires lock."
 #~ msgstr ""
 #~ "Die Funktion erwartet, dass der 'lock'-Befehl zuvor ausgeführt wurde"
@@ -2893,9 +2863,27 @@ msgstr ""
 #~ msgid "Invalid data pin"
 #~ msgstr "Ungültiger data pin"
 
+#~ msgid ""
+#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+#~ " with the contents of your CIRCUITPY drive and this message:\n"
+#~ msgstr ""
+#~ "Sieht aus, als wäre der CircuitPython-Kernel-Code abgestürzt. Uups!\n"
+#~ "Bitte melde das Problem unter https://github.com/adafruit/circuitpython/"
+#~ "issues\n"
+#~ "mit dem Inhalt deines CIRCUITPY-Laufwerks und dieser Nachricht:\n"
+
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "Maximale PWM Frequenz ist %dHz"
 
+#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+#~ msgstr ""
+#~ "MicroPython-NLR-Sprung ist fehlgeschlagen. Wahrscheinlich "
+#~ "Speicherbeschädigung.\n"
+
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "Schwerwiegender MicroPython-Fehler\n"
+
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "Minimale PWM Frequenz ist %dHz"
 
@@ -2942,6 +2930,41 @@ msgstr ""
 #~ msgid "STA required"
 #~ msgstr "STA erforderlich"
 
+#~ msgid ""
+#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
+#~ "Please increase stack size limits and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ "If you didn't change the stack, then file an issue here with the contents "
+#~ "of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Der CircuitPython-Heap war beschädigt, weil der Stack zu klein war.\n"
+#~ "Bitte erhöhe die stack size limits und drücke die Reset-Taste (nach "
+#~ "Auswurf des CIRCUITPY-Laufwerks)\n"
+#~ "Wenn du den Stack nicht geändert hast, melde bitte das Problem unter "
+#~ "https://github.com/adafruit/circuitpython/issues\n"
+#~ "mit dem Inhalt deines CIRCUITPY-Laufwerks.\n"
+
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "Die Stromversorgung des Mikrocontrollers ist eingebrochen. Stelle sicher, "
+#~ "dass deine Stromversorgung genug Leistung für die gesamte Schaltung zur "
+#~ "Verfügung stellt und drücke die Reset-Taste (nach Auswurf des CIRCUITPY-"
+#~ "Laufwerks)\n"
+
+#~ msgid ""
+#~ "The reset button was pressed while booting CircuitPython. Press again to "
+#~ "exit safe mode.\n"
+#~ msgstr ""
+#~ "Die Reset-Taste wurde beim Booten von CircuitPython gedrückt. Drücke sie "
+#~ "erneut um den abgesicherten Modus zu verlassen. \n"
+
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Zum beenden, resette bitte das board ohne "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) existiert nicht"
 
@@ -2964,9 +2987,20 @@ msgstr ""
 #~ msgid "Voice index too high"
 #~ msgstr "Voice index zu hoch"
 
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Sie laufen im abgesicherten Modus, was bedeutet, dass etwas Unerwartetes "
+#~ "passiert ist.\n"
+
 #~ msgid "buffer too long"
 #~ msgstr "Buffer zu lang"
 
+#, c-format
+#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
+#~ msgstr "byteorder ist keine Instanz von ByteOrder (%s erhalten)"
+
 #~ msgid "expected a DigitalInOut"
 #~ msgstr "erwarte DigitalInOut"
 
@@ -3019,6 +3053,9 @@ msgstr ""
 #~ msgid "pin does not have IRQ capabilities"
 #~ msgstr "Pin hat keine IRQ Fähigkeiten"
 
+#~ msgid "readonly attribute"
+#~ msgstr "Readonly-Attribut"
+
 #~ msgid "scan failed"
 #~ msgstr "Scan fehlgeschlagen"
 
@@ -3030,3 +3067,6 @@ msgstr ""
 
 #~ msgid "wifi_set_ip_info() failed"
 #~ msgstr "wifi_set_ip_info() fehlgeschlagen"
+
+#~ msgid "write_args must be a list, tuple, or None"
+#~ msgstr "write_args muss eine Liste, ein Tupel oder None sein"

locale/en_US.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr ""
 
@@ -119,6 +133,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr ""
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -288,7 +306,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -356,6 +374,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -374,11 +396,6 @@ msgstr ""
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -396,6 +413,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@@ -440,6 +461,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@@ -478,25 +509,30 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Couldn't allocate first buffer"
+msgid "Couldn't allocate decoder"
 msgstr ""
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate first buffer"
+msgstr ""
+
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -554,10 +590,14 @@ msgid "Expected a %q"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -576,11 +616,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -590,15 +625,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr ""
@@ -609,10 +635,6 @@ msgstr ""
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -621,49 +643,8 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to discover services"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
 msgstr ""
 
 #: ports/nrf/sd_mutex.c
@@ -671,65 +652,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
 msgstr ""
 
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -770,6 +704,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -796,6 +738,10 @@ msgstr ""
 msgid "Invalid buffer size"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -894,13 +840,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@@ -915,11 +854,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
@@ -930,6 +869,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -988,6 +931,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1024,10 +971,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1119,7 +1062,7 @@ msgstr ""
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1128,7 +1071,6 @@ msgid "Sample rate must be positive"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr ""
@@ -1166,10 +1108,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1180,18 +1119,11 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@@ -1224,10 +1156,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@@ -1301,11 +1229,36 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
@@ -1354,9 +1307,12 @@ msgid ""
 "To list built-in modules please do `help(\"modules\")`.\n"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Writes not supported on Characteristic"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
-"You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1493,8 +1449,7 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1821,7 +1776,7 @@ msgstr ""
 msgid "extra positional arguments given"
 msgstr ""
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -2174,7 +2129,7 @@ msgstr ""
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr ""
 
@@ -2355,10 +2310,6 @@ msgstr ""
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr ""
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2499,12 +2450,8 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2664,10 +2611,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""

locale/en_x_pirate.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: @sommersoft, @MrCertainly\n"
@@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Captin's orders are complete. Holdin' fast fer reload.\n"
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@@ -55,7 +68,8 @@ msgid "%q indices must be integers, not %s"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr ""
 
@@ -121,6 +135,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr ""
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -290,7 +308,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -360,6 +378,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -378,11 +400,6 @@ msgstr ""
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -400,6 +417,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@@ -444,6 +465,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@@ -482,25 +513,30 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Couldn't allocate first buffer"
+msgid "Couldn't allocate decoder"
 msgstr ""
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate first buffer"
+msgstr ""
+
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
+#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -558,10 +594,14 @@ msgid "Expected a %q"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -580,11 +620,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -594,15 +629,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr ""
@@ -613,10 +639,6 @@ msgstr ""
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -625,49 +647,8 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to discover services"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
 msgstr ""
 
 #: ports/nrf/sd_mutex.c
@@ -675,65 +656,18 @@ msgstr ""
 msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
 msgstr ""
 
 #: py/moduerrno.c
 msgid "File exists"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -774,6 +708,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -800,6 +742,10 @@ msgstr ""
 msgid "Invalid buffer size"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -898,13 +844,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@@ -919,11 +858,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
@@ -934,6 +873,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -992,6 +935,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1028,10 +975,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1123,7 +1066,7 @@ msgstr "Runnin' in safe mode! Auto-reload be off.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Runnin' in safe mode! Nay runnin' saved code.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1132,7 +1075,6 @@ msgid "Sample rate must be positive"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr ""
@@ -1170,10 +1112,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1184,18 +1123,11 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@@ -1228,10 +1160,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@@ -1305,11 +1233,36 @@ msgstr ""
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
@@ -1358,9 +1311,12 @@ msgid ""
 "To list built-in modules please do `help(\"modules\")`.\n"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Writes not supported on Characteristic"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
-"You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1497,8 +1453,7 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1825,7 +1780,7 @@ msgstr ""
 msgid "extra positional arguments given"
 msgstr ""
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -2178,7 +2133,7 @@ msgstr ""
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr ""
 
@@ -2359,10 +2314,6 @@ msgstr ""
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr ""
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2503,12 +2454,8 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2668,10 +2615,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""

locale/es.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "El código terminó su ejecución. Esperando para recargar.\n"
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Archivo \"%q\""
@@ -55,7 +68,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "%q indices deben ser enteros, no %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr "%q debe ser >= 1"
 
@@ -121,6 +135,10 @@ msgstr "'%s' entero %d no esta dentro del rango %d..%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' entero 0x%x no cabe en la máscara 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -292,10 +310,8 @@ msgid "Array values should be single bytes."
 msgstr "Valores del array deben ser bytes individuales."
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
-"Intento de allocation de heap cuando la VM de MicroPython no estaba "
-"corriendo.\n"
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -364,6 +380,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr "Buffer debe ser de longitud 1 como minimo"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -382,11 +402,6 @@ msgstr "Bytes debe estar entre 0 y 255."
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr "No se puede usar dotstar con %s"
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -404,6 +419,10 @@ msgstr "No puede ser pull mientras este en modo de salida"
 msgid "Cannot get temperature"
 msgstr "No se puede obtener la temperatura."
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "No se puede tener ambos canales en el mismo pin"
@@ -448,6 +467,16 @@ msgstr "No se puede escribir sin pin MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "CharateristicBuffer escritura no proporcionada"
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Clock pin init fallido"
@@ -486,26 +515,31 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr "No se puede descodificar ble_uuid, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "No se pudo asignar el primer buffer"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "No se pudo asignar el segundo buffer"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Choque en el HardFault_Handler.\n"
+msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -562,10 +596,14 @@ msgid "Expected a %q"
 msgstr "Se espera un %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr "Se esperaba una Característica."
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -584,11 +622,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr "Se esperaba un tuple de %d, se obtuvo %d"
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Fallo enviando comando"
@@ -598,15 +631,6 @@ msgstr "Fallo enviando comando"
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "No se puede adquirir el mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Ha fallado la asignación del buffer RX"
@@ -617,10 +641,6 @@ msgstr "Ha fallado la asignación del buffer RX"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Falló la asignación del buffer RX de %d bytes"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -629,116 +649,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-#, fuzzy
-msgid "Failed to discover services"
-msgstr "No se puede descubrir servicios"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr "No se puede obtener la dirección local"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr "No se puede obtener el estado del softdevice"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr "Error al notificar o indicar el valor del atributo, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "No se puede leer el valor del atributo. err 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr "Error al leer valor del atributo, err 0x%04"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "No se puede escribir el valor del atributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Fallo al registrar el Vendor-Specific UUID, err 0x%04x"
-
 #: ports/nrf/sd_mutex.c
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "No se puede liberar el mutex, err 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "No se puede iniciar el escaneo. err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "No se puede escribir el valor del atributo. err: 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "No se puede escribir el valor del atributo. err: 0x%04x"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "El archivo ya existe"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr "Falló borrado de flash"
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr "Falló el iniciar borrado de flash, err 0x%04x"
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Falló la escritura"
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr "Falló el iniciar la escritura de flash, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "Frecuencia capturada por encima de la capacidad. Captura en pausa."
@@ -781,6 +712,14 @@ msgstr "Tamaño incorrecto del buffer"
 msgid "Input/output error"
 msgstr "error Input/output"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -807,6 +746,10 @@ msgstr "Inválido bits por valor"
 msgid "Invalid buffer size"
 msgstr "Tamaño de buffer inválido"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Inválido periodo de captura. Rango válido: 1 - 500"
@@ -905,17 +848,6 @@ msgstr "Length debe ser un int"
 msgid "Length must be non-negative"
 msgstr "Longitud no deberia ser negativa"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-"Parece que nuestro código de CircuitPython ha fallado con fuerza. Whoops!\n"
-"Por favor, crea un issue en https://github.com/adafruit/circuitpython/"
-"issues\n"
-" con el contenido de su unidad CIRCUITPY y este mensaje:\n"
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "MISO pin init fallido."
@@ -930,12 +862,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Valor máximo de x cuando se refleja es %d"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "MicroPython NLR salto fallido. Probable corrupción de memoria.\n"
+msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Error fatal de MicroPython.\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -945,6 +877,10 @@ msgstr "Micrófono demora de inicio debe estar en el rango 0.0 a 1.0"
 msgid "Must be a %q subclass."
 msgstr "Debe de ser una subclase de %q"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1003,6 +939,10 @@ msgstr "No queda espacio en el dispositivo"
 msgid "No such file/directory"
 msgstr "No existe el archivo/directorio"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1043,11 +983,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, fuzzy
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr "solo se admiten segmentos con step=1 (alias None)"
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "El sobremuestreo debe ser un múltiplo de 8"
@@ -1145,7 +1080,7 @@ msgstr "Ejecutando en modo seguro! La auto-recarga esta deshabilitada.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Ejecutando en modo seguro! No se esta ejecutando el código guardado.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necesitan una pull up"
 
@@ -1154,7 +1089,6 @@ msgid "Sample rate must be positive"
 msgstr "Sample rate debe ser positivo"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Frecuencia de muestreo demasiado alta. Debe ser menor a %d"
@@ -1192,17 +1126,8 @@ msgstr "A Stream le falta el método readinto() o write()."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
-"El heap de CircuitPython estaba corrupto porque el stack era demasiado "
-"pequeño.\n"
-"Aumente los límites del tamaño del stacj y presione reset (después de "
-"expulsarCIRCUITPY).\n"
-"Si no cambió el stack, entonces reporte un issue aquí con el contenido desu "
-"unidad CIRCUITPY:\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1212,23 +1137,10 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"La alimentación del microcontrolador cayó. Por favor asegurate de que tu "
-"fuente de alimentación provee\n"
-"suficiente energia para todo el circuito y presiona el botón de reset "
-"(despuesde expulsar CIRCUITPY).\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-"El botón reset fue presionado mientras arrancaba CircuitPython. Presiona "
-"otra vez para salir del modo seguro.\n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1262,10 +1174,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr "Ancho del Tile debe dividir exactamente el ancho de mapa de bits"
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Para salir, por favor reinicia la tarjeta sin "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Demasiados canales en sample."
@@ -1339,11 +1247,36 @@ msgstr "Imposible escribir en nvm"
 msgid "Unexpected nrfx uuid type"
 msgstr "Tipo de uuid nrfx inesperado"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr "Número incomparable de elementos en RHS (%d esperado,%d obtenido)"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate no soportado"
@@ -1399,12 +1332,13 @@ msgstr ""
 "\n"
 "Para listar los módulos incorporados por favor haga `help(\"modules\")`.\n"
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-msgid ""
+msgid "Writes not supported on Characteristic"
-"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Estás ejecutando en modo seguro, lo cual significa que algo realmente malo "
-"ha sucedido.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1540,9 +1474,8 @@ msgid "byte code not implemented"
 msgstr "codigo byte no implementado"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgstr ""
-msgstr "byteorder no es instancia de ByteOrder (encontarmos un %s)"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
@@ -1875,7 +1808,7 @@ msgstr "argumento(s) por palabra clave adicionales fueron dados"
 msgid "extra positional arguments given"
 msgstr "argumento posicional adicional dado"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr "el archivo deberia ser una archivo abierto en modo byte"
@@ -2231,7 +2164,7 @@ msgstr "ningún módulo se llama '%q'"
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "no hay tal atributo"
 
@@ -2416,11 +2349,6 @@ msgstr "desbordamiento de cola(queue)"
 msgid "rawbuf is not the same size as buf"
 msgstr "rawbuf no es el mismo tamaño que buf"
 
-#: shared-bindings/_pixelbuf/__init__.c
-#, fuzzy
-msgid "readonly attribute"
-msgstr "atributo no legible"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "import relativo"
@@ -2564,13 +2492,9 @@ msgstr "limite debe ser en el rango 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr "time.struct_time() toma un sequencio 9"
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr "time.struct_time() acepta exactamente 1 argumento"
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
-msgstr "timepo muerto >100 (unidades en segundos)"
+msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
@@ -2729,10 +2653,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "numero erroneo de argumentos"
@@ -2765,6 +2685,15 @@ msgstr "paso cero"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "Direción no es %d bytes largo o esta en el formato incorrecto"
 
+#~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
+#~ msgstr ""
+#~ "Intento de allocation de heap cuando la VM de MicroPython no estaba "
+#~ "corriendo.\n"
+
+#, c-format
+#~ msgid "Can not use dotstar with %s"
+#~ msgstr "No se puede usar dotstar con %s"
+
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "No se pueden agregar servicio en modo Central"
 
@@ -2795,6 +2724,12 @@ msgstr "paso cero"
 #~ msgid "Characteristic already in use by another Service."
 #~ msgstr "Características ya esta en uso por otro Serivice"
 
+#~ msgid "Could not decode ble_uuid, err 0x%04x"
+#~ msgstr "No se puede descodificar ble_uuid, err 0x%04x"
+
+#~ msgid "Crash into the HardFault_Handler.\n"
+#~ msgstr "Choque en el HardFault_Handler.\n"
+
 #, fuzzy
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Los datos no caben en el paquete de anuncio."
@@ -2815,7 +2750,7 @@ msgstr "paso cero"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "No se puede adquirir el mutex, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Fallo al añadir caracteristica, err: 0x%08lX"
 
@@ -2823,7 +2758,6 @@ msgstr "paso cero"
 #~ msgid "Failed to add service"
 #~ msgstr "No se puede detener el anuncio. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Fallo al agregar servicio. err: 0x%02x"
 
@@ -2838,7 +2772,6 @@ msgstr "paso cero"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "No se puede iniciar el escaneo. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "No se puede iniciar el escaneo. err: 0x%02x"
 
@@ -2846,14 +2779,40 @@ msgstr "paso cero"
 #~ msgid "Failed to create mutex"
 #~ msgstr "No se puede leer el valor del atributo. status 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to discover services"
+#~ msgstr "No se puede descubrir servicios"
+
+#~ msgid "Failed to get local address"
+#~ msgstr "No se puede obtener la dirección local"
+
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "No se puede obtener el estado del softdevice"
+
 #, fuzzy
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "No se puede notificar el valor del anuncio. status: 0x%02x"
 
+#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
+#~ msgstr "Error al notificar o indicar el valor del atributo, err 0x%04x"
+
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "No se puede leer el valor del atributo. err 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "No se puede leer el valor del atributo. status 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to read attribute value, err 0x%04x"
+#~ msgstr "Error al leer valor del atributo, err 0x%04"
+
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "No se puede escribir el valor del atributo. status: 0x%02x"
+
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Fallo al registrar el Vendor-Specific UUID, err 0x%04x"
+
 #, fuzzy
 #~ msgid "Failed to release mutex"
 #~ msgstr "No se puede liberar el mutex, status: 0x%08lX"
@@ -2862,7 +2821,6 @@ msgstr "paso cero"
 #~ msgid "Failed to start advertising"
 #~ msgstr "No se puede inicar el anuncio. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "No se puede inicar el anuncio. err: 0x%04x"
 
@@ -2870,14 +2828,31 @@ msgstr "paso cero"
 #~ msgid "Failed to start scanning"
 #~ msgstr "No se puede iniciar el escaneo. status: 0x%02x"
 
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "No se puede iniciar el escaneo. err 0x%04x"
+
 #, fuzzy
 #~ msgid "Failed to stop advertising"
 #~ msgstr "No se puede detener el anuncio. status: 0x%02x"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "No se puede detener el anuncio. err: 0x%04x"
 
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "No se puede escribir el valor del atributo. err: 0x%04x"
+
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "No se puede escribir el valor del atributo. err: 0x%04x"
+
+#~ msgid "Flash erase failed"
+#~ msgstr "Falló borrado de flash"
+
+#~ msgid "Flash erase failed to start, err 0x%04x"
+#~ msgstr "Falló el iniciar borrado de flash, err 0x%04x"
+
+#~ msgid "Flash write failed to start, err 0x%04x"
+#~ msgstr "Falló el iniciar la escritura de flash, err 0x%04x"
+
 #~ msgid "Function requires lock."
 #~ msgstr "La función requiere lock"
 
@@ -2893,9 +2868,26 @@ msgstr "paso cero"
 #~ msgid "Invalid data pin"
 #~ msgstr "Pin de datos inválido"
 
+#~ msgid ""
+#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+#~ " with the contents of your CIRCUITPY drive and this message:\n"
+#~ msgstr ""
+#~ "Parece que nuestro código de CircuitPython ha fallado con fuerza. "
+#~ "Whoops!\n"
+#~ "Por favor, crea un issue en https://github.com/adafruit/circuitpython/"
+#~ "issues\n"
+#~ " con el contenido de su unidad CIRCUITPY y este mensaje:\n"
+
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "La frecuencia máxima del PWM es %dhz."
 
+#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+#~ msgstr "MicroPython NLR salto fallido. Probable corrupción de memoria.\n"
+
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "Error fatal de MicroPython.\n"
+
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "La frecuencia mínima del PWM es 1hz"
 
@@ -2928,6 +2920,10 @@ msgstr "paso cero"
 #~ "Solo se admiten BMP monocromos, indexados de 8bpp y 16bpp o superiores:% "
 #~ "d bppdado"
 
+#, fuzzy
+#~ msgid "Only slices with step=1 (aka None) are supported"
+#~ msgstr "solo se admiten segmentos con step=1 (alias None)"
+
 #~ msgid "Only true color (24 bpp or higher) BMP supported %x"
 #~ msgstr "Solo color verdadero (24 bpp o superior) BMP admitido %x"
 
@@ -2952,13 +2948,47 @@ msgstr "paso cero"
 #~ msgid "STA required"
 #~ msgstr "STA requerido"
 
-#, c-format
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 
+#~ msgid ""
+#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
+#~ "Please increase stack size limits and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ "If you didn't change the stack, then file an issue here with the contents "
+#~ "of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "El heap de CircuitPython estaba corrupto porque el stack era demasiado "
+#~ "pequeño.\n"
+#~ "Aumente los límites del tamaño del stacj y presione reset (después de "
+#~ "expulsarCIRCUITPY).\n"
+#~ "Si no cambió el stack, entonces reporte un issue aquí con el contenido "
+#~ "desu unidad CIRCUITPY:\n"
+
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "La alimentación del microcontrolador cayó. Por favor asegurate de que tu "
+#~ "fuente de alimentación provee\n"
+#~ "suficiente energia para todo el circuito y presiona el botón de reset "
+#~ "(despuesde expulsar CIRCUITPY).\n"
+
+#~ msgid ""
+#~ "The reset button was pressed while booting CircuitPython. Press again to "
+#~ "exit safe mode.\n"
+#~ msgstr ""
+#~ "El botón reset fue presionado mientras arrancaba CircuitPython. Presiona "
+#~ "otra vez para salir del modo seguro.\n"
+
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Los índices de Tile deben ser 0 - 255"
 
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Para salir, por favor reinicia la tarjeta sin "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) no existe"
 
@@ -2981,12 +3011,23 @@ msgstr "paso cero"
 #~ msgid "Voice index too high"
 #~ msgstr "Index de voz demasiado alto"
 
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Estás ejecutando en modo seguro, lo cual significa que algo realmente "
+#~ "malo ha sucedido.\n"
+
 #~ msgid "bad GATT role"
 #~ msgstr "mal GATT role"
 
 #~ msgid "buffer too long"
 #~ msgstr "buffer demasiado largo"
 
+#, c-format
+#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
+#~ msgstr "byteorder no es instancia de ByteOrder (encontarmos un %s)"
+
 #~ msgid "can query only one param"
 #~ msgstr "puede consultar solo un param"
 
@@ -3063,6 +3104,10 @@ msgstr "paso cero"
 #~ msgid "position must be 2-tuple"
 #~ msgstr "posición debe ser 2-tuple"
 
+#, fuzzy
+#~ msgid "readonly attribute"
+#~ msgstr "atributo no legible"
+
 #~ msgid "row must be packed and word aligned"
 #~ msgstr "la fila debe estar empacada y la palabra alineada"
 
@@ -3075,6 +3120,12 @@ msgstr "paso cero"
 #~ msgid "tile index out of bounds"
 #~ msgstr "el indice del tile fuera de limite"
 
+#~ msgid "time.struct_time() takes exactly 1 argument"
+#~ msgstr "time.struct_time() acepta exactamente 1 argumento"
+
+#~ msgid "timeout >100 (units are now seconds, not msecs)"
+#~ msgstr "timepo muerto >100 (unidades en segundos)"
+
 #~ msgid "too many arguments"
 #~ msgstr "muchos argumentos"
 

locale/fil.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  File \"%q\""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "%q indeks ay dapat integers, hindi %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 #, fuzzy
 msgid "%q must be >= 1"
 msgstr "aarehas na haba dapat ang buffer slices"
@@ -122,6 +136,10 @@ msgstr "'%s' integer %d ay wala sa sakop ng %d..%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' integer 0x%x ay wala sa mask na sakop ng 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -292,7 +310,7 @@ msgid "Array values should be single bytes."
 msgstr "Array values ay dapat single bytes."
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -362,6 +380,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr "Buffer dapat ay hindi baba sa 1 na haba"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
@@ -381,11 +403,6 @@ msgstr "Sa gitna ng 0 o 255 dapat ang bytes."
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -404,6 +421,10 @@ msgstr "Hindi makakakuha ng pull habang nasa output mode"
 msgid "Cannot get temperature"
 msgstr "Hindi makuha ang temperatura. status 0x%02x"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Hindi maaaring output ang mga parehong channel sa parehong pin"
@@ -448,6 +469,16 @@ msgstr "Hindi maaring isulat kapag walang MOSI pin."
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Nabigo sa pag init ng Clock pin."
@@ -487,26 +518,31 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Hindi ma-iallocate ang first buffer"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Hindi ma-iallocate ang second buffer"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Nagcrash sa HardFault_Handler.\n"
+msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -566,11 +602,15 @@ msgid "Expected a %q"
 msgstr "Umasa ng %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Hindi mabasa and Characteristic."
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -590,11 +630,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -604,15 +639,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Nabigo sa pag kuha ng mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Nabigong ilaan ang RX buffer"
@@ -623,10 +649,6 @@ msgstr "Nabigong ilaan ang RX buffer"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Nabigong ilaan ang RX buffer ng %d bytes"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -635,118 +657,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-#, fuzzy
-msgid "Failed to discover services"
-msgstr "Nabigo sa pagdiscover ng services, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get local address"
-msgstr "Nabigo sa pagkuha ng local na address, , error: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get softdevice state"
-msgstr "Nabigo sa pagkuha ng softdevice state, error: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, fuzzy, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Hindi mabasa ang value ng attribute, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Hindi maisulat ang gatts value, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, fuzzy, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Hindi matagumpay ang paglagay ng Vender Specific UUID, status: 0x%08lX"
-
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Nabigo sa pagrelease ng mutex, status: 0x%08lX"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Hindi masimulaan mag i-scan, status: 0x%0xlX"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Hindi maisulat ang attribute value, status: 0x%08lX"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Hindi maisulat ang gatts value, status: 0x%08lX"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Mayroong file"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -789,6 +720,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr "May mali sa Input/Output"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -815,6 +754,10 @@ msgstr ""
 msgid "Invalid buffer size"
 msgstr "Mali ang buffer size"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -913,17 +856,6 @@ msgstr "Haba ay dapat int"
 msgid "Length must be non-negative"
 msgstr "Haba ay dapat hindi negatibo"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-"Mukhang ang core CircuitPython code nag crash. Ay!\n"
-"Maaring mag file ng issue sa https://github.com/adafruit/circuitpython/"
-"issues\n"
-"kasama ng laman ng iyong CIRCUITPY drive at ang message na ito:\n"
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Hindi ma-initialize ang MISO pin."
@@ -938,12 +870,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "CircuitPython NLR jump nabigo. Maaring memory corruption.\n"
+msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "CircuitPython fatal na pagkakamali.\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -953,6 +885,10 @@ msgstr "Ang delay ng startup ng mikropono ay dapat na nasa 0.0 hanggang 1.0"
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1011,6 +947,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr "Walang file/directory"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -1050,11 +990,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, fuzzy
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr "ang mga slices lamang na may hakbang = 1 (aka None) ang sinusuportahan"
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Oversample ay dapat multiple ng 8."
@@ -1151,7 +1086,7 @@ msgstr "Tumatakbo sa safe mode! Awtomatikong pag re-reload ay OFF.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Tumatakbo sa safe mode! Hindi tumatakbo ang nai-save na code.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "Kailangan ng pull up resistors ang SDA o SCL"
 
@@ -1160,7 +1095,6 @@ msgid "Sample rate must be positive"
 msgstr "Sample rate ay dapat positibo"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Sample rate ay masyadong mataas. Ito ay dapat hindi hiigit sa %d"
@@ -1198,16 +1132,8 @@ msgstr "Stream kulang ng readinto() o write() method."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
-"Ang CircuitPython heap ay na corrupt dahil ang stack ay maliit.\n"
-"Maaring i-increase ang stack size limit at i-press ang reset (pagkatapos i-"
-"eject ang CIRCUITPY.\n"
-"Kung hindi mo pinalitan ang stack, mag file ng issue dito kasama ng laman ng "
-"CIRCUITPY drive:\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1217,22 +1143,10 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"Ang kapangyarihan ng mikrokontroller ay bumaba. Mangyaring suriin ang power "
-"supply \n"
-"pindutin ang reset (pagkatapos i-eject ang CIRCUITPY).\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-"Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
-"ulit para lumabas sa safe mode.\n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1266,10 +1180,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Para lumabas, paki-reset ang board na wala ang "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Sobra ang channels sa sample."
@@ -1344,11 +1254,36 @@ msgstr "Hindi ma i-sulat sa NVM."
 msgid "Unexpected nrfx uuid type"
 msgstr "hindi inaasahang indent"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Hindi supportadong baudrate"
@@ -1406,10 +1341,13 @@ msgstr ""
 "\n"
 "Para makita ang listahan ng modules, `help(“modules”)`.\n"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Writes not supported on Characteristic"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
-"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
-msgstr "Ikaw ay tumatakbo sa safe mode dahil may masamang nangyari.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1546,8 +1484,7 @@ msgid "byte code not implemented"
 msgstr "byte code hindi pa implemented"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1885,7 +1822,7 @@ msgstr "dagdag na keyword argument na ibinigay"
 msgid "extra positional arguments given"
 msgstr "dagdag na positional argument na ibinigay"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr "file ay dapat buksan sa byte mode"
@@ -2243,7 +2180,7 @@ msgstr "walang module na '%q'"
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "walang ganoon na attribute"
 
@@ -2426,11 +2363,6 @@ msgstr "puno na ang pila (overflow)"
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-#, fuzzy
-msgid "readonly attribute"
-msgstr "hindi mabasa ang attribute"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "relative import"
@@ -2574,13 +2506,9 @@ msgstr "ang threshold ay dapat sa range 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr "time.struct_time() kumukuha ng 9-sequence"
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr "time.struct_time() kumukuha ng 1 argument"
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
-msgstr "timeout >100 (units ay seconds, hindi na msecs)"
+msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -2740,10 +2668,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "mali ang bilang ng argumento"
@@ -2800,6 +2724,9 @@ msgstr "zero step"
 #~ msgid "Cannot update i/f status"
 #~ msgstr "Hindi ma-update i/f status"
 
+#~ msgid "Crash into the HardFault_Handler.\n"
+#~ msgstr "Nagcrash sa HardFault_Handler.\n"
+
 #, fuzzy
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Hindi makasya ang data sa loob ng advertisement packet"
@@ -2820,7 +2747,7 @@ msgstr "zero step"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Nabigo sa pag kuha ng mutex, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Nabigo sa paglagay ng characteristic, status: 0x%08lX"
 
@@ -2828,7 +2755,7 @@ msgstr "zero step"
 #~ msgid "Failed to add service"
 #~ msgstr "Hindi matagumpay ang paglagay ng service, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Hindi matagumpay ang paglagay ng service, status: 0x%08lX"
 
@@ -2844,7 +2771,7 @@ msgstr "zero step"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Hindi maituloy ang pag scan, status: 0x%0xlX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Hindi maituloy ang pag scan, status: 0x%0xlX"
 
@@ -2852,14 +2779,39 @@ msgstr "zero step"
 #~ msgid "Failed to create mutex"
 #~ msgstr "Hindi matagumpay ang pagbuo ng mutex, status: 0x%0xlX"
 
+#, fuzzy
+#~ msgid "Failed to discover services"
+#~ msgstr "Nabigo sa pagdiscover ng services, status: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to get local address"
+#~ msgstr "Nabigo sa pagkuha ng local na address, , error: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Nabigo sa pagkuha ng softdevice state, error: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "Hindi mabalitaan ang attribute value, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Hindi mabasa ang value ng attribute, status: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "Hindi mabasa ang value ng attribute, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Hindi maisulat ang gatts value, status: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr ""
+#~ "Hindi matagumpay ang paglagay ng Vender Specific UUID, status: 0x%08lX"
+
 #, fuzzy
 #~ msgid "Failed to release mutex"
 #~ msgstr "Nabigo sa pagrelease ng mutex, status: 0x%08lX"
@@ -2868,7 +2820,7 @@ msgstr "zero step"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Hindi masimulaan ang advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Hindi masimulaan ang advertisement, status: 0x%08lX"
 
@@ -2876,14 +2828,26 @@ msgstr "zero step"
 #~ msgid "Failed to start scanning"
 #~ msgstr "Hindi masimulaan mag i-scan, status: 0x%0xlX"
 
+#, fuzzy
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Hindi masimulaan mag i-scan, status: 0x%0xlX"
+
 #, fuzzy
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Hindi mahinto ang advertisement, status: 0x%08lX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Hindi mahinto ang advertisement, status: 0x%08lX"
 
+#, fuzzy
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Hindi maisulat ang attribute value, status: 0x%08lX"
+
+#, fuzzy
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Hindi maisulat ang gatts value, status: 0x%08lX"
+
 #~ msgid "Function requires lock."
 #~ msgstr "Kailangan ng lock ang function."
 
@@ -2899,9 +2863,25 @@ msgstr "zero step"
 #~ msgid "Invalid data pin"
 #~ msgstr "Mali ang data pin"
 
+#~ msgid ""
+#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+#~ " with the contents of your CIRCUITPY drive and this message:\n"
+#~ msgstr ""
+#~ "Mukhang ang core CircuitPython code nag crash. Ay!\n"
+#~ "Maaring mag file ng issue sa https://github.com/adafruit/circuitpython/"
+#~ "issues\n"
+#~ "kasama ng laman ng iyong CIRCUITPY drive at ang message na ito:\n"
+
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "Pinakamataas na PWM frequency ay %dhz."
 
+#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+#~ msgstr "CircuitPython NLR jump nabigo. Maaring memory corruption.\n"
+
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "CircuitPython fatal na pagkakamali.\n"
+
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "Pinakamababang PWM frequency ay 1hz."
 
@@ -2922,6 +2902,11 @@ msgstr "zero step"
 #~ msgid "Only bit maps of 8 bit color or less are supported"
 #~ msgstr "Tanging bit maps na may 8 bit color o mas mababa ang supportado"
 
+#, fuzzy
+#~ msgid "Only slices with step=1 (aka None) are supported"
+#~ msgstr ""
+#~ "ang mga slices lamang na may hakbang = 1 (aka None) ang sinusuportahan"
+
 #~ msgid "Only true color (24 bpp or higher) BMP supported %x"
 #~ msgstr "Dapat true color (24 bpp o mas mataas) BMP lamang ang supportado %x"
 
@@ -2946,6 +2931,39 @@ msgstr "zero step"
 #~ msgid "STA required"
 #~ msgstr "STA kailangan"
 
+#~ msgid ""
+#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
+#~ "Please increase stack size limits and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ "If you didn't change the stack, then file an issue here with the contents "
+#~ "of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Ang CircuitPython heap ay na corrupt dahil ang stack ay maliit.\n"
+#~ "Maaring i-increase ang stack size limit at i-press ang reset (pagkatapos "
+#~ "i-eject ang CIRCUITPY.\n"
+#~ "Kung hindi mo pinalitan ang stack, mag file ng issue dito kasama ng laman "
+#~ "ng CIRCUITPY drive:\n"
+
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "Ang kapangyarihan ng mikrokontroller ay bumaba. Mangyaring suriin ang "
+#~ "power supply \n"
+#~ "pindutin ang reset (pagkatapos i-eject ang CIRCUITPY).\n"
+
+#~ msgid ""
+#~ "The reset button was pressed while booting CircuitPython. Press again to "
+#~ "exit safe mode.\n"
+#~ msgstr ""
+#~ "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
+#~ "ulit para lumabas sa safe mode.\n"
+
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Para lumabas, paki-reset ang board na wala ang "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "Walang UART(%d)"
 
@@ -2965,6 +2983,11 @@ msgstr "zero step"
 #~ msgid "Voice index too high"
 #~ msgstr "Index ng Voice ay masyadong mataas"
 
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr "Ikaw ay tumatakbo sa safe mode dahil may masamang nangyari.\n"
+
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[addrinfo error %d]"
 
@@ -3042,12 +3065,22 @@ msgstr "zero step"
 #~ msgid "position must be 2-tuple"
 #~ msgstr "position ay dapat 2-tuple"
 
+#, fuzzy
+#~ msgid "readonly attribute"
+#~ msgstr "hindi mabasa ang attribute"
+
 #~ msgid "row must be packed and word aligned"
 #~ msgstr "row ay dapat packed at ang word nakahanay"
 
 #~ msgid "scan failed"
 #~ msgstr "nabigo ang pag-scan"
 
+#~ msgid "time.struct_time() takes exactly 1 argument"
+#~ msgstr "time.struct_time() kumukuha ng 1 argument"
+
+#~ msgid "timeout >100 (units are now seconds, not msecs)"
+#~ msgstr "timeout >100 (units ay seconds, hindi na msecs)"
+
 #~ msgid "too many arguments"
 #~ msgstr "masyadong maraming argumento"
 

locale/fr.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2019-04-14 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Fin d'éxecution du code. En attente de recharge.\n"
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Fichier \"%q\""
@@ -55,7 +68,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "les indices %q doivent être des entiers, pas %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 #, fuzzy
 msgid "%q must be >= 1"
 msgstr "%d doit être >=1"
@@ -123,6 +137,10 @@ msgstr "'%s' l'entier %d n'est pas dans la gamme %d..%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' l'entier 0x%x ne correspond pas au masque 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -296,9 +314,8 @@ msgid "Array values should be single bytes."
 msgstr "Les valeurs du tableau doivent être des octets simples 'bytes'."
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
-"Tentative d'allocation de tas alors que la VM MicroPython ne tourne pas.\n"
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -367,6 +384,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr "Le tampon doit être de longueur au moins 1"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
@@ -386,11 +407,6 @@ msgstr "Les octets 'bytes' doivent être entre 0 et 255"
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr "Impossible d'utiliser 'dotstar' avec %s"
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -409,6 +425,10 @@ msgstr "Ne peut être tiré ('pull') en mode 'output'"
 msgid "Cannot get temperature"
 msgstr "Impossible de lire la température"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Les 2 canaux de sortie ne peuvent être sur la même broche"
@@ -454,6 +474,16 @@ msgstr "Impossible d'écrire sans broche MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Ecriture sur 'CharacteristicBuffer' non fournie"
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Echec de l'init. de la broche d'horloge"
@@ -493,26 +523,31 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr "Impossible de décoder le 'ble_uuid', err 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Impossible d'allouer le 1er tampon"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Impossible d'allouer le 2e tampon"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Plantage vers le 'HardFault_Handler'.\n"
+msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -570,11 +605,15 @@ msgid "Expected a %q"
 msgstr "Attendu un %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Une 'Characteristic' est attendue"
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -594,11 +633,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr "Tuple de longueur %d attendu, obtenu %d"
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -608,15 +642,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Echec de l'obtention de mutex, err 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Echec de l'allocation du tampon RX"
@@ -627,10 +652,6 @@ msgstr "Echec de l'allocation du tampon RX"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Echec de l'allocation de %d octets du tampon RX"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -639,119 +660,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-#, fuzzy
-msgid "Failed to discover services"
-msgstr "Echec de la découverte de services"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get local address"
-msgstr "Echec de l'obtention de l'adresse locale"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get softdevice state"
-msgstr "Echec de l'obtention de l'état du périphérique"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-"Impossible de notifier ou d'indiquer la valeur de l'attribut, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, fuzzy, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Impossible de lire la valeur 'CCCD', err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr "Impossible de lire la valeur de l'attribut, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Impossible de lire la valeur de 'gatts', err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, fuzzy, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Echec de l'ajout de l'UUID du fournisseur, err 0x%04x"
-
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Impossible de libérer mutex, err 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Impossible de commencer à scanner, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Impossible d'écrire la valeur de l'attribut, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Impossible d'écrire la valeur de 'gatts', err 0x%04x"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Le fichier existe"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr "L'effacement de la flash a échoué"
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr "Echec du démarrage de l'effacement de la flash, err 0x%04x"
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "L'écriture de la flash échoué"
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr "Echec du démarrage de l'écriture de la flash, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "La fréquence capturée est au delà des capacités. Capture en pause."
@@ -794,6 +723,14 @@ msgstr "Taille de tampon incorrecte"
 msgid "Input/output error"
 msgstr "Erreur d'entrée/sortie"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -822,6 +759,10 @@ msgstr "Bits par valeur invalides"
 msgid "Invalid buffer size"
 msgstr "Longueur de tampon invalide"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Période de capture invalide. Gamme valide: 1 à 500"
@@ -922,17 +863,6 @@ msgstr "La longueur doit être un nombre entier"
 msgid "Length must be non-negative"
 msgstr "La longueur ne doit pas être négative"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-"On dirait que notre code CircuitPython a durement planté. Oups !\n"
-"Merci de remplir un ticket sur https://github.com/adafruit/circuitpython/"
-"issues\n"
-"avec le contenu de votre lecteur CIRCUITPY et ce message:\n"
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Echec de l'init. de la broche MISO"
@@ -947,12 +877,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "La valeur max. de x est %d lors d'une opération miroir"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "Saut MicroPython NLR a échoué. Corruption de mémoire possible.\n"
+msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Erreur fatale de MicroPython.\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -962,6 +892,10 @@ msgstr "Le délais au démarrage du micro doit être entre 0.0 et 1.0"
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1020,6 +954,10 @@ msgstr "Il n'y a plus d'espace libre sur le périphérique"
 msgid "No such file/directory"
 msgstr "Fichier/dossier introuvable"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -1062,11 +1000,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, fuzzy
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr "seuls les slices avec 'step=1' (cad 'None') sont supportées"
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Le sur-échantillonage doit être un multiple de 8."
@@ -1166,7 +1099,7 @@ msgstr "Mode sans-échec! Auto-chargement désactivé.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Mode sans-échec! Le code sauvegardé n'est pas éxecuté.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')"
 
@@ -1176,7 +1109,6 @@ msgid "Sample rate must be positive"
 msgstr "Le taux d'échantillonage doit être positif"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Taux d'échantillonage trop élevé. Doit être inf. à %d"
@@ -1214,17 +1146,8 @@ msgstr "Il manque une méthode readinto() ou write() au flux."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
-"Le tas (heap) de CircuitPython a été corrompu parce que la pile était trop "
-"petite.\n"
-"Augmentez la limite de taille de la pile et appuyez sur 'reset' (après avoir "
-"éjecté CIRCUITPY).\n"
-"Si vous n'avez pas modifié la pile, merci de remplir un ticket avec le "
-"contenu  de votre lecteur CIRCUITPY :\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1233,25 +1156,11 @@ msgid ""
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-#, fuzzy
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"L'alimentation du microcontroleur a chuté. Merci de vérifier que votre "
-"alimentation fournit\n"
-"suffisamment de puissance pour l'ensemble du circuit et appuyez sur "
-"'reset' (après avoir éjecté CIRCUITPY).\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-"Le bouton 'reset' a été appuyé pendant le démarrage de CircuitPython. "
-"Appuyer de nouveau pour quitter de le mode sans-échec.\n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1286,10 +1195,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr "La largeur de la tuile doit diviser exactement la largeur de l'image"
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Pour quitter, redémarrez la carte SVP sans "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Trop de canaux dans l'échantillon."
@@ -1367,12 +1272,37 @@ msgstr "Impossible d'écrire sur la mémoire non-volatile."
 msgid "Unexpected nrfx uuid type"
 msgstr "Type inattendu pour l'uuid nrfx"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 "Pas de correspondance du nombres d'éléments à droite (attendu %d, obtenu %d)"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Débit non supporté"
@@ -1428,12 +1358,13 @@ msgstr ""
 "\n"
 "Pour lister les modules inclus, tapez `help(\"modules\")`.\n"
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-#, fuzzy
+msgid "Writes not supported on Characteristic"
-msgid ""
+msgstr ""
-"You are running in safe mode which means something unanticipated happened.\n"
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Vous êtes en mode sans-échec ce qui signifie qu'un imprévu est survenu.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1572,9 +1503,8 @@ msgid "byte code not implemented"
 msgstr "bytecode non implémenté"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgstr ""
-msgstr "'byteorder' n'est pas une instance de ByteOrder (reçu un %s)"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
@@ -1918,7 +1848,7 @@ msgstr "argument(s) nommé(s) supplémentaire(s) donné(s)"
 msgid "extra positional arguments given"
 msgstr "argument(s) positionnel(s) supplémentaire(s) donné(s)"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr "le fichier doit être un fichier ouvert en mode 'byte'"
@@ -2276,7 +2206,7 @@ msgstr "pas de module '%q'"
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "pas de tel attribut"
 
@@ -2466,11 +2396,6 @@ msgstr "dépassement de file"
 msgid "rawbuf is not the same size as buf"
 msgstr "'rawbuf' n'est pas de la même taille que 'buf'"
 
-#: shared-bindings/_pixelbuf/__init__.c
-#, fuzzy
-msgid "readonly attribute"
-msgstr "attribut en lecture seule"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "import relatif"
@@ -2615,13 +2540,9 @@ msgstr "le seuil doit être dans la gamme 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr "time.struct_time() prend une séquence de longueur 9"
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr "time.struct_time() prend exactement 1 argument"
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
-msgstr "timeout >100 (exprimé en secondes, pas en ms)"
+msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -2782,10 +2703,6 @@ msgstr "'value_count' doit être > 0"
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr "'write_args' doit être une liste, un tuple ou 'None'"
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "mauvais nombres d'arguments"
@@ -2819,6 +2736,14 @@ msgstr "'step' nul"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "L'adresse n'est pas longue de %d octets ou est d'un format erroné"
 
+#~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
+#~ msgstr ""
+#~ "Tentative d'allocation de tas alors que la VM MicroPython ne tourne pas.\n"
+
+#, c-format
+#~ msgid "Can not use dotstar with %s"
+#~ msgstr "Impossible d'utiliser 'dotstar' avec %s"
+
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Impossible d'ajouter des services en mode Central"
 
@@ -2849,6 +2774,12 @@ msgstr "'step' nul"
 #~ msgid "Characteristic already in use by another Service."
 #~ msgstr "'Characteristic' déjà en utilisation par un autre service"
 
+#~ msgid "Could not decode ble_uuid, err 0x%04x"
+#~ msgstr "Impossible de décoder le 'ble_uuid', err 0x%04x"
+
+#~ msgid "Crash into the HardFault_Handler.\n"
+#~ msgstr "Plantage vers le 'HardFault_Handler'.\n"
+
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Données trop volumineuses pour le paquet de diffusion"
 
@@ -2868,7 +2799,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Echec de l'obtention de mutex"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Echec de l'ajout de caractéristique, err 0x%04x"
 
@@ -2876,7 +2807,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to add service"
 #~ msgstr "Echec de l'ajout de service"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Echec de l'ajout de service, err 0x%04x"
 
@@ -2892,7 +2823,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Impossible de poursuivre le scan"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Impossible de poursuivre le scan, err 0x%04x"
 
@@ -2900,14 +2831,45 @@ msgstr "'step' nul"
 #~ msgid "Failed to create mutex"
 #~ msgstr "Echec de la création de mutex"
 
+#, fuzzy
+#~ msgid "Failed to discover services"
+#~ msgstr "Echec de la découverte de services"
+
+#, fuzzy
+#~ msgid "Failed to get local address"
+#~ msgstr "Echec de l'obtention de l'adresse locale"
+
+#, fuzzy
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Echec de l'obtention de l'état du périphérique"
+
 #, fuzzy
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "Impossible de notifier la valeur de l'attribut. status: 0x%08lX"
 
+#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
+#~ msgstr ""
+#~ "Impossible de notifier ou d'indiquer la valeur de l'attribut, err 0x%04x"
+
+#, fuzzy
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Impossible de lire la valeur 'CCCD', err 0x%04x"
+
 #, fuzzy
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "Impossible de lire la valeur de l'attribut. status: 0x%08lX"
 
+#~ msgid "Failed to read attribute value, err 0x%04x"
+#~ msgstr "Impossible de lire la valeur de l'attribut, err 0x%04x"
+
+#, fuzzy
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Impossible de lire la valeur de 'gatts', err 0x%04x"
+
+#, fuzzy
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Echec de l'ajout de l'UUID du fournisseur, err 0x%04x"
+
 #, fuzzy
 #~ msgid "Failed to release mutex"
 #~ msgstr "Impossible de libérer mutex"
@@ -2916,7 +2878,7 @@ msgstr "'step' nul"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Echec du démarrage de la diffusion"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Impossible de commencer à diffuser, err 0x%04x"
 
@@ -2924,14 +2886,35 @@ msgstr "'step' nul"
 #~ msgid "Failed to start scanning"
 #~ msgstr "Impossible de commencer à scanner"
 
+#, fuzzy
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Impossible de commencer à scanner, err 0x%04x"
+
 #, fuzzy
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Echec de l'arrêt de diffusion"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Echec de l'arrêt de diffusion, err 0x%04x"
 
+#, fuzzy
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Impossible d'écrire la valeur de l'attribut, err 0x%04x"
+
+#, fuzzy
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Impossible d'écrire la valeur de 'gatts', err 0x%04x"
+
+#~ msgid "Flash erase failed"
+#~ msgstr "L'effacement de la flash a échoué"
+
+#~ msgid "Flash erase failed to start, err 0x%04x"
+#~ msgstr "Echec du démarrage de l'effacement de la flash, err 0x%04x"
+
+#~ msgid "Flash write failed to start, err 0x%04x"
+#~ msgstr "Echec du démarrage de l'écriture de la flash, err 0x%04x"
+
 #~ msgid "Function requires lock."
 #~ msgstr "La fonction nécessite un verrou."
 
@@ -2947,9 +2930,25 @@ msgstr "'step' nul"
 #~ msgid "Invalid data pin"
 #~ msgstr "Broche de données invalide"
 
+#~ msgid ""
+#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+#~ " with the contents of your CIRCUITPY drive and this message:\n"
+#~ msgstr ""
+#~ "On dirait que notre code CircuitPython a durement planté. Oups !\n"
+#~ "Merci de remplir un ticket sur https://github.com/adafruit/circuitpython/"
+#~ "issues\n"
+#~ "avec le contenu de votre lecteur CIRCUITPY et ce message:\n"
+
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "La fréquence de PWM maximale est %dHz"
 
+#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+#~ msgstr "Saut MicroPython NLR a échoué. Corruption de mémoire possible.\n"
+
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "Erreur fatale de MicroPython.\n"
+
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "La fréquence de PWM minimale est 1Hz"
 
@@ -2979,6 +2978,10 @@ msgstr "'step' nul"
 #~ "Seul les BMP monochromes, 8bit indexé et 16bit sont supportés: %d bpp "
 #~ "fourni"
 
+#, fuzzy
+#~ msgid "Only slices with step=1 (aka None) are supported"
+#~ msgstr "seuls les slices avec 'step=1' (cad 'None') sont supportées"
+
 #~ msgid "Only true color (24 bpp or higher) BMP supported %x"
 #~ msgstr "Seul les BMP 24bits ou plus sont supportés %x"
 
@@ -3003,13 +3006,48 @@ msgstr "'step' nul"
 #~ msgid "STA required"
 #~ msgstr "'STA' requis"
 
-#, c-format
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Assertion en mode 'soft-device', id: 0x%08lX, pc: 0x%08lX"
 
+#~ msgid ""
+#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
+#~ "Please increase stack size limits and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ "If you didn't change the stack, then file an issue here with the contents "
+#~ "of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Le tas (heap) de CircuitPython a été corrompu parce que la pile était "
+#~ "trop petite.\n"
+#~ "Augmentez la limite de taille de la pile et appuyez sur 'reset' (après "
+#~ "avoir éjecté CIRCUITPY).\n"
+#~ "Si vous n'avez pas modifié la pile, merci de remplir un ticket avec le "
+#~ "contenu  de votre lecteur CIRCUITPY :\n"
+
+#, fuzzy
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "L'alimentation du microcontroleur a chuté. Merci de vérifier que votre "
+#~ "alimentation fournit\n"
+#~ "suffisamment de puissance pour l'ensemble du circuit et appuyez sur "
+#~ "'reset' (après avoir éjecté CIRCUITPY).\n"
+
+#~ msgid ""
+#~ "The reset button was pressed while booting CircuitPython. Press again to "
+#~ "exit safe mode.\n"
+#~ msgstr ""
+#~ "Le bouton 'reset' a été appuyé pendant le démarrage de CircuitPython. "
+#~ "Appuyer de nouveau pour quitter de le mode sans-échec.\n"
+
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Les indices des tuiles doivent être compris entre 0 et 255 "
 
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Pour quitter, redémarrez la carte SVP sans "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) n'existe pas"
 
@@ -3032,12 +3070,23 @@ msgstr "'step' nul"
 #~ msgid "Voice index too high"
 #~ msgstr "Index de la voix trop grand"
 
+#, fuzzy
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Vous êtes en mode sans-échec ce qui signifie qu'un imprévu est survenu.\n"
+
 #~ msgid "bad GATT role"
 #~ msgstr "mauvais rôle GATT"
 
 #~ msgid "buffer too long"
 #~ msgstr "tampon trop long"
 
+#, c-format
+#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
+#~ msgstr "'byteorder' n'est pas une instance de ByteOrder (reçu un %s)"
+
 #~ msgid "can query only one param"
 #~ msgstr "ne peut demander qu'un seul paramètre"
 
@@ -3114,6 +3163,10 @@ msgstr "'step' nul"
 #~ msgid "position must be 2-tuple"
 #~ msgstr "position doit être un 2-tuple"
 
+#, fuzzy
+#~ msgid "readonly attribute"
+#~ msgstr "attribut en lecture seule"
+
 #~ msgid "scan failed"
 #~ msgstr "échec du scan"
 
@@ -3123,6 +3176,12 @@ msgstr "'step' nul"
 #~ msgid "tile index out of bounds"
 #~ msgstr "indice de tuile hors limites"
 
+#~ msgid "time.struct_time() takes exactly 1 argument"
+#~ msgstr "time.struct_time() prend exactement 1 argument"
+
+#~ msgid "timeout >100 (units are now seconds, not msecs)"
+#~ msgstr "timeout >100 (exprimé en secondes, pas en ms)"
+
 #~ msgid "too many arguments"
 #~ msgstr "trop d'arguments"
 
@@ -3134,3 +3193,6 @@ msgstr "'step' nul"
 
 #~ msgid "wifi_set_ip_info() failed"
 #~ msgstr "wifi_set_ip_info() a échoué"
+
+#~ msgid "write_args must be a list, tuple, or None"
+#~ msgstr "'write_args' doit être une liste, un tuple ou 'None'"

locale/it_IT.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  File \"%q\""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "gli indici %q devono essere interi, non %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 #, fuzzy
 msgid "%q must be >= 1"
 msgstr "slice del buffer devono essere della stessa lunghezza"
@@ -121,6 +135,10 @@ msgstr "intero '%s' non è nell'intervallo %d..%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "intero '%s' non è nell'intervallo %d..%d"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -291,7 +309,7 @@ msgid "Array values should be single bytes."
 msgstr "Valori di Array dovrebbero essere bytes singulari"
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -362,6 +380,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr "Il buffer deve essere lungo almeno 1"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
@@ -381,11 +403,6 @@ msgstr "I byte devono essere compresi tra 0 e 255"
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr "dotstar non può essere usato con %s"
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -404,6 +421,10 @@ msgstr "non si può tirare quando nella modalita output"
 msgid "Cannot get temperature"
 msgstr "Impossibile leggere la temperatura. status: 0x%02x"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Impossibile dare in output entrambi i canal sullo stesso pin"
@@ -449,6 +470,16 @@ msgstr "Impossibile scrivere senza pin MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "CharacteristicBuffer scritura non dato"
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Inizializzazione del pin di clock fallita."
@@ -488,25 +519,30 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Impossibile allocare il primo buffer"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Impossibile allocare il secondo buffer"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -566,11 +602,15 @@ msgid "Expected a %q"
 msgstr "Atteso un %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Non è possibile aggiungere Characteristic."
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -590,11 +630,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -604,15 +639,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Impossibile allocare buffer RX"
@@ -623,10 +649,6 @@ msgstr "Impossibile allocare buffer RX"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Fallita allocazione del buffer RX di %d byte"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -635,117 +657,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-#, fuzzy
-msgid "Failed to discover services"
-msgstr "Impossibile fermare advertisement. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get softdevice state"
-msgstr "Impossibile fermare advertisement. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr "Notificamento o indicazione di attribute value fallito, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, fuzzy, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr "Tentative leggere attribute value fallito, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, fuzzy, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Non è possibile aggiungere l'UUID del vendor specifico da 128-bit"
-
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Impossible iniziare la scansione. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "File esistente"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr "Cancellamento di Flash fallito"
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr "Iniziamento di Cancellamento di Flash fallito, err 0x%04x"
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Impostazione di Flash fallito"
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr "Iniziamento di Impostazione di Flash dallito, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -788,6 +720,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr "Errore input/output"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -815,6 +755,10 @@ msgstr "bits per valore invalido"
 msgid "Invalid buffer size"
 msgstr "lunghezza del buffer non valida"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "periodo di cattura invalido. Zona valida: 1 - 500"
@@ -915,13 +859,6 @@ msgstr "Length deve essere un intero"
 msgid "Length must be non-negative"
 msgstr "Length deve essere non negativo"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "inizializzazione del pin MISO fallita."
@@ -936,12 +873,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Valore massimo di x quando rispachiato è %d"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Errore fatale in MicroPython.\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -952,6 +889,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1010,6 +951,10 @@ msgstr "Non che spazio sul dispositivo"
 msgid "No such file/directory"
 msgstr "Nessun file/directory esistente"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -1050,11 +995,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, fuzzy
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr "solo slice con step=1 (aka None) sono supportate"
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "L'oversampling deve essere multiplo di 8."
@@ -1155,7 +1095,7 @@ msgstr "Modalità sicura in esecuzione! Auto-reload disattivato.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Modalità sicura in esecuzione! Codice salvato non in esecuzione.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necessitano un pull-up"
 
@@ -1165,7 +1105,6 @@ msgid "Sample rate must be positive"
 msgstr "STA deve essere attiva"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr ""
@@ -1204,10 +1143,7 @@ msgstr "Metodi mancanti readinto() o write() allo stream."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1217,21 +1153,11 @@ msgid ""
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-#, fuzzy
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"La potenza del microcontrollore è calata. Assicurati che l'alimentazione sia "
-"attaccata correttamente\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1265,10 +1191,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Per uscire resettare la scheda senza "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@@ -1343,11 +1265,36 @@ msgstr "Imposibile scrivere su nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "indentazione inaspettata"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "baudrate non supportato"
@@ -1397,13 +1344,13 @@ msgid ""
 "To list built-in modules please do `help(\"modules\")`.\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-#, fuzzy
+msgid "Writes not supported on Characteristic"
-msgid ""
+msgstr ""
-"You are running in safe mode which means something unanticipated happened.\n"
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Sei nella modalità sicura che significa che qualcosa di molto brutto è "
-"successo.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1542,8 +1489,7 @@ msgid "byte code not implemented"
 msgstr "byte code non implementato"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1877,7 +1823,7 @@ msgstr "argomento nominato aggiuntivo fornito"
 msgid "extra positional arguments given"
 msgstr "argomenti posizonali extra dati"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -2237,7 +2183,7 @@ msgstr "nessun modulo chiamato '%q'"
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "attributo inesistente"
 
@@ -2424,11 +2370,6 @@ msgstr "overflow della coda"
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-#, fuzzy
-msgid "readonly attribute"
-msgstr "attributo non leggibile"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "importazione relativa"
@@ -2572,12 +2513,8 @@ msgstr "la soglia deve essere nell'intervallo 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr "time.struct_time() prende esattamente un argomento"
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2738,10 +2675,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "numero di argomenti errato"
@@ -2774,6 +2707,10 @@ msgstr "zero step"
 #~ msgid "C-level assert"
 #~ msgstr "assert a livello C"
 
+#, c-format
+#~ msgid "Can not use dotstar with %s"
+#~ msgstr "dotstar non può essere usato con %s"
+
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "non si può aggiungere servizi in Central mode"
 
@@ -2824,7 +2761,7 @@ msgstr "zero step"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Impossibile allocare buffer RX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
@@ -2832,7 +2769,7 @@ msgstr "zero step"
 #~ msgid "Failed to add service"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
@@ -2848,7 +2785,7 @@ msgstr "zero step"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
@@ -2856,14 +2793,40 @@ msgstr "zero step"
 #~ msgid "Failed to create mutex"
 #~ msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to discover services"
+#~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
+
+#, fuzzy
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "Impossibile notificare valore dell'attributo. status: 0x%02x"
 
+#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
+#~ msgstr "Notificamento o indicazione di attribute value fallito, err 0x%04x"
+
+#, fuzzy
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
 
+#~ msgid "Failed to read attribute value, err 0x%04x"
+#~ msgstr "Tentative leggere attribute value fallito, err 0x%04x"
+
+#, fuzzy
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
+
+#, fuzzy
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Non è possibile aggiungere l'UUID del vendor specifico da 128-bit"
+
 #, fuzzy
 #~ msgid "Failed to release mutex"
 #~ msgstr "Impossibile leggere valore dell'attributo. status: 0x%02x"
@@ -2872,7 +2835,7 @@ msgstr "zero step"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Impossibile avviare advertisement. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Impossibile avviare advertisement. status: 0x%02x"
 
@@ -2880,14 +2843,35 @@ msgstr "zero step"
 #~ msgid "Failed to start scanning"
 #~ msgstr "Impossible iniziare la scansione. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Impossible iniziare la scansione. status: 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Impossibile fermare advertisement. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
+
+#, fuzzy
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Impossibile scrivere valore dell'attributo. status: 0x%02x"
+
+#~ msgid "Flash erase failed"
+#~ msgstr "Cancellamento di Flash fallito"
+
+#~ msgid "Flash erase failed to start, err 0x%04x"
+#~ msgstr "Iniziamento di Cancellamento di Flash fallito, err 0x%04x"
+
+#~ msgid "Flash write failed to start, err 0x%04x"
+#~ msgstr "Iniziamento di Impostazione di Flash dallito, err 0x%04x"
+
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 non supporta pull-up"
 
@@ -2903,6 +2887,9 @@ msgstr "zero step"
 #~ msgid "Maximum PWM frequency is %dhz."
 #~ msgstr "Frequenza massima su PWM è %dhz"
 
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "Errore fatale in MicroPython.\n"
+
 #~ msgid "Minimum PWM frequency is 1hz."
 #~ msgstr "Frequenza minima su PWM è 1hz"
 
@@ -2924,6 +2911,10 @@ msgstr "zero step"
 #~ msgid "Only bit maps of 8 bit color or less are supported"
 #~ msgstr "Sono supportate solo bitmap con colori a 8 bit o meno"
 
+#, fuzzy
+#~ msgid "Only slices with step=1 (aka None) are supported"
+#~ msgstr "solo slice con step=1 (aka None) sono supportate"
+
 #~ msgid "Only true color (24 bpp or higher) BMP supported %x"
 #~ msgstr "Solo BMP true color (24 bpp o superiore) sono supportati %x"
 
@@ -2948,6 +2939,19 @@ msgstr "zero step"
 #~ msgid "STA required"
 #~ msgstr "STA richiesta"
 
+#, fuzzy
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "La potenza del microcontrollore è calata. Assicurati che l'alimentazione "
+#~ "sia attaccata correttamente\n"
+
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Per uscire resettare la scheda senza "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) non esistente"
 
@@ -2963,6 +2967,14 @@ msgstr "zero step"
 #~ msgid "Use esptool to erase flash and re-upload Python instead"
 #~ msgstr "Usa esptool per cancellare la flash e ricaricare Python invece"
 
+#, fuzzy
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Sei nella modalità sicura che significa che qualcosa di molto brutto è "
+#~ "successo.\n"
+
 #~ msgid "[addrinfo error %d]"
 #~ msgstr "[errore addrinfo %d]"
 
@@ -3040,12 +3052,19 @@ msgstr "zero step"
 #~ msgid "position must be 2-tuple"
 #~ msgstr "position deve essere una 2-tuple"
 
+#, fuzzy
+#~ msgid "readonly attribute"
+#~ msgstr "attributo non leggibile"
+
 #~ msgid "row must be packed and word aligned"
 #~ msgstr "la riga deve essere compattata e allineata alla parola"
 
 #~ msgid "scan failed"
 #~ msgstr "scansione fallita"
 
+#~ msgid "time.struct_time() takes exactly 1 argument"
+#~ msgstr "time.struct_time() prende esattamente un argomento"
+
 #~ msgid "too many arguments"
 #~ msgstr "troppi argomenti"
 

locale/pl.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -24,6 +24,19 @@ msgstr ""
 "\n"
 "Kod wykonany. Czekam na przeładowanie.\n"
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Plik \"%q\""
@@ -54,7 +67,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "%q indeks musi być liczbą całkowitą, a nie %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr "%q musi być >= 1"
 
@@ -120,6 +134,10 @@ msgstr "'%s' liczba %d poza zakresem %d..%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' liczba 0x%x nie pasuje do maski 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -289,8 +307,8 @@ msgid "Array values should be single bytes."
 msgstr "Wartości powinny być bajtami."
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
-msgstr "Próba alokacji pamięci na stercie gdy VM nie działa.\n"
+msgstr ""
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -359,6 +377,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr "Bufor musi mieć długość 1 lub więcej"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -377,11 +399,6 @@ msgstr "Bytes musi być między 0 a 255."
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr "Nie można używać dotstar z %s"
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -399,6 +416,10 @@ msgstr "Nie ma podciągnięcia w trybie wyjścia"
 msgid "Cannot get temperature"
 msgstr "Nie można odczytać temperatury"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Nie można mieć obu kanałów na tej samej nóżce"
@@ -443,6 +464,16 @@ msgstr "Nie można pisać bez nóżki MOSI."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Pisanie do CharacteristicBuffer niewspierane"
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Nie powiodło się ustawienie nóżki zegara"
@@ -481,26 +512,31 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr "Nie można zdekodować ble_uuid, błąd 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Ustawienie UART nie powiodło się"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Nie udała się alokacja pierwszego bufora"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Nie udała się alokacja drugiego bufora"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Katastrofa w HardFault_Handler.\n"
+msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -557,10 +593,14 @@ msgid "Expected a %q"
 msgstr "Oczekiwano %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr "Oczekiwano charakterystyki"
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -579,11 +619,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr "Oczekiwano krotkę długości %d, otrzymano %d"
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -593,15 +628,6 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Nie udało się uzyskać blokady, błąd 0x$04x"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Nie udała się alokacja bufora RX"
@@ -612,10 +638,6 @@ msgstr "Nie udała się alokacja bufora RX"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Nie udała się alokacja %d bajtów na bufor RX"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -624,115 +646,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to discover services"
-msgstr "Nie udało się odkryć serwisów"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr "Nie udało się uzyskać lokalnego adresu"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr "Nie udało się odczytać stanu softdevice"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr "Nie udało się powiadomić o wartości atrybutu, błąd 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Nie udało się odczytać CCCD, błąd 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr "Nie udało się odczytać wartości atrybutu, błąd 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Nie udało się odczytać gatts, błąd 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Nie udało się zarejestrować UUID dostawcy, błąd 0x%04x"
-
 #: ports/nrf/sd_mutex.c
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Nie udało się zwolnić blokady, błąd 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Nie udało się rozpocząć skanowania, błąd 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Nie udało się zapisać atrybutu, błąd 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Nie udało się zapisać gatts, błąd 0x%04x"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Plik istnieje"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr "Nie udało się skasować flash"
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr "Nie udało się rozpocząć kasowania flash, błąd 0x%04x"
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Zapis do flash nie powiódł się"
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr "Nie udało się rozpocząć zapisu do flash, błąd 0x%04x"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "Uzyskana częstotliwość jest niemożliwa. Spauzowano."
@@ -775,6 +709,14 @@ msgstr "Niewłaściwa wielkość bufora"
 msgid "Input/output error"
 msgstr "Błąd I/O"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -801,6 +743,10 @@ msgstr "Zła liczba bitów wartości"
 msgid "Invalid buffer size"
 msgstr "Zła wielkość bufora"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Zły okres. Poprawny zakres to: 1 - 500"
@@ -899,17 +845,6 @@ msgstr "Długość musi być całkowita"
 msgid "Length must be non-negative"
 msgstr "Długość musi być nieujemna"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-"Ojej, wygląda na to, że CircuitPython natrafił na poważny problem!\n"
-"Prosimy o zgłoszenie błędu pod adresem https://github.com/adafruit/"
-"circuitpython/issues\n"
-" z zawartością dysku CIRCUITPY oraz tym komunikatem:\n"
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Nie powiodło się ustawienie nóżki MISO."
@@ -924,13 +859,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Największa wartość x przy odwróceniu to %d"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
-"Skok NLR MicroPythona nie powiódł się. Prawdopodobne skażenie pamięci.\n"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "Krytyczny błąd MicroPythona.\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -940,6 +874,10 @@ msgstr "Opóźnienie włączenia mikrofonu musi być w zakresie od 0.0 do 1.0"
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -998,6 +936,10 @@ msgstr "Brak miejsca"
 msgid "No such file/directory"
 msgstr "Brak pliku/katalogu"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1034,10 +976,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr "Wspierane są tylko fragmenty z step=1 (albo None)"
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Nadpróbkowanie musi być wielokrotnością 8."
@@ -1129,7 +1067,7 @@ msgstr "Uruchomiony tryb bezpieczeństwa! Samo-przeładowanie wyłączone.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Uruchomiony tryb bezpieczeństwa! Zapisany kod nie jest uruchamiany.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA lub SCL wymagają podciągnięcia"
 
@@ -1138,7 +1076,6 @@ msgid "Sample rate must be positive"
 msgstr "Częstotliwość próbkowania musi być dodatnia"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Zbyt wysoka częstotliwość próbkowania. Musi być mniejsza niż %d"
@@ -1176,16 +1113,8 @@ msgstr "Strumień nie ma metod readinto() lub write()."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
-"Sterta CircuitPythona jest skażona z powodu zbyt małego stosu.\n"
-"Proszę zwiększyć limity wielkości stosu i nazisnąć reset (po odmontowaniu "
-"CIRCUITPY).\n"
-"Jeśli wielkość stosu nie była zmieniana, proszę zgłosić błąd zawierający "
-"zawartość CIRCUITPY tutaj:\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1195,22 +1124,10 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"Zasilanie mikrokontrolera gwałtownie spadło. Proszę upewnić się,\n"
-"że zasilanie jest wystarczające dla całego obwodu in nacisnąć reset (po "
-"odmontowaniu CIRCUITPY).\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-"Przycisk reset został wciśnięty podczas startu CircuitPythona. Wciśnij go "
-"ponownie aby wyjść z trybu bezpieczeństwa.\n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1244,10 +1161,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr "Szerokość bitmapy musi być wielokrotnością szerokości kafelka"
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "By wyjść, proszę zresetować płytkę bez "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Zbyt wiele kanałów."
@@ -1321,11 +1234,36 @@ msgstr "Błąd zapisu do NVM."
 msgid "Unexpected nrfx uuid type"
 msgstr "Nieoczekiwany typ nrfx uuid."
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr "Zła liczba obiektów po prawej stronie (oczekiwano %d, jest %d)."
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Zła szybkość transmisji"
@@ -1377,11 +1315,13 @@ msgstr ""
 "Podręczniki dostępne na learn.adafruit.com/category/circuitpyhon.\n"
 "Aby zobaczyć wbudowane moduły, wpisz `help(\"modules\")`.\n"
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-msgid ""
+msgid "Writes not supported on Characteristic"
-"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Uruchomiono w trybie bezpieczeństwa, gdyż nastąpiło coś nieoczekiwanego.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1517,9 +1457,8 @@ msgid "byte code not implemented"
 msgstr "bajtkod niezaimplemntowany"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgstr ""
-msgstr "byteorder musi być typu ByteOrder (jest %s)"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
@@ -1846,7 +1785,7 @@ msgstr "nadmiarowe argumenty nazwane"
 msgid "extra positional arguments given"
 msgstr "nadmiarowe argumenty pozycyjne"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr "file musi być otwarte w trybie bajtowym"
@@ -2199,7 +2138,7 @@ msgstr "brak modułu o nazwie '%q'"
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "nie ma takiego atrybutu"
 
@@ -2381,10 +2320,6 @@ msgstr "przepełnienie kolejki"
 msgid "rawbuf is not the same size as buf"
 msgstr "rawbuf nie jest tej samej wielkości co buf"
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr "atrybut tylko do odczytu"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "relatywny import"
@@ -2526,13 +2461,9 @@ msgstr "threshold musi być w zakresie 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr "time.struct_time() wymaga 9-elementowej sekwencji"
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr "time.struct_time() wymaga jednego argumentu"
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
-msgstr "timeout > 100 (jednostkami są sekundy)"
+msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
@@ -2691,10 +2622,6 @@ msgstr "value_count musi być > 0"
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr "write_args musi być listą, krotką lub None"
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "zła liczba argumentów"
@@ -2722,6 +2649,13 @@ msgstr "zerowy krok"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "Adres nie ma długości %d bajtów lub zły format"
 
+#~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
+#~ msgstr "Próba alokacji pamięci na stercie gdy VM nie działa.\n"
+
+#, c-format
+#~ msgid "Can not use dotstar with %s"
+#~ msgstr "Nie można używać dotstar z %s"
+
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Nie można dodać serwisów w trybie Central"
 
@@ -2740,20 +2674,25 @@ msgstr "zerowy krok"
 #~ msgid "Characteristic already in use by another Service."
 #~ msgstr "Charakterystyka w użyciu w innym serwisie"
 
+#~ msgid "Could not decode ble_uuid, err 0x%04x"
+#~ msgstr "Nie można zdekodować ble_uuid, błąd 0x%04x"
+
+#~ msgid "Crash into the HardFault_Handler.\n"
+#~ msgstr "Katastrofa w HardFault_Handler.\n"
+
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Zbyt dużo danych pakietu rozgłoszeniowego"
 
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Nie udało się uzyskać blokady"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Nie udało się dodać charakterystyki, błąd 0x$04x"
 
 #~ msgid "Failed to add service"
 #~ msgstr "Nie udało się dodać serwisu"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Nie udało się dodać serwisu, błąd 0x%04x"
 
@@ -2766,33 +2705,72 @@ msgstr "zerowy krok"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Nie udała się kontynuacja skanowania"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Nie udała się kontynuacja skanowania, błąd 0x%04x"
 
 #~ msgid "Failed to create mutex"
 #~ msgstr "Nie udało się stworzyć blokady"
 
+#~ msgid "Failed to discover services"
+#~ msgstr "Nie udało się odkryć serwisów"
+
+#~ msgid "Failed to get local address"
+#~ msgstr "Nie udało się uzyskać lokalnego adresu"
+
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Nie udało się odczytać stanu softdevice"
+
+#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
+#~ msgstr "Nie udało się powiadomić o wartości atrybutu, błąd 0x%04x"
+
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Nie udało się odczytać CCCD, błąd 0x%04x"
+
+#~ msgid "Failed to read attribute value, err 0x%04x"
+#~ msgstr "Nie udało się odczytać wartości atrybutu, błąd 0x%04x"
+
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Nie udało się odczytać gatts, błąd 0x%04x"
+
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Nie udało się zarejestrować UUID dostawcy, błąd 0x%04x"
+
 #~ msgid "Failed to release mutex"
 #~ msgstr "Nie udało się zwolnić blokady"
 
 #~ msgid "Failed to start advertising"
 #~ msgstr "Nie udało się rozpocząć rozgłaszania"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Nie udało się rozpocząć rozgłaszania, błąd 0x%04x"
 
 #~ msgid "Failed to start scanning"
 #~ msgstr "Nie udało się rozpocząć skanowania"
 
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Nie udało się rozpocząć skanowania, błąd 0x%04x"
+
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Nie udało się zatrzymać rozgłaszania"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Nie udało się zatrzymać rozgłaszania, błąd 0x%04x"
 
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Nie udało się zapisać atrybutu, błąd 0x%04x"
+
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Nie udało się zapisać gatts, błąd 0x%04x"
+
+#~ msgid "Flash erase failed"
+#~ msgstr "Nie udało się skasować flash"
+
+#~ msgid "Flash erase failed to start, err 0x%04x"
+#~ msgstr "Nie udało się rozpocząć kasowania flash, błąd 0x%04x"
+
+#~ msgid "Flash write failed to start, err 0x%04x"
+#~ msgstr "Nie udało się rozpocząć zapisu do flash, błąd 0x%04x"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Zła nóżka zegara"
 
@@ -2802,6 +2780,23 @@ msgstr "zerowy krok"
 #~ msgid "Invalid data pin"
 #~ msgstr "Zła nóżka danych"
 
+#~ msgid ""
+#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+#~ " with the contents of your CIRCUITPY drive and this message:\n"
+#~ msgstr ""
+#~ "Ojej, wygląda na to, że CircuitPython natrafił na poważny problem!\n"
+#~ "Prosimy o zgłoszenie błędu pod adresem https://github.com/adafruit/"
+#~ "circuitpython/issues\n"
+#~ " z zawartością dysku CIRCUITPY oraz tym komunikatem:\n"
+
+#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+#~ msgstr ""
+#~ "Skok NLR MicroPythona nie powiódł się. Prawdopodobne skażenie pamięci.\n"
+
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "Krytyczny błąd MicroPythona.\n"
+
 #~ msgid "Must be a Group subclass."
 #~ msgstr "Musi dziedziczyć z Group."
 
@@ -2810,22 +2805,67 @@ msgstr "zerowy krok"
 #~ "bpp given"
 #~ msgstr "Wspierane są tylko pliki BMP czarno-białe, 8bpp i 16bpp: %d bpp "
 
-#, c-format
+#~ msgid "Only slices with step=1 (aka None) are supported"
+#~ msgstr "Wspierane są tylko fragmenty z step=1 (albo None)"
+
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 
+#~ msgid ""
+#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
+#~ "Please increase stack size limits and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ "If you didn't change the stack, then file an issue here with the contents "
+#~ "of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Sterta CircuitPythona jest skażona z powodu zbyt małego stosu.\n"
+#~ "Proszę zwiększyć limity wielkości stosu i nazisnąć reset (po odmontowaniu "
+#~ "CIRCUITPY).\n"
+#~ "Jeśli wielkość stosu nie była zmieniana, proszę zgłosić błąd zawierający "
+#~ "zawartość CIRCUITPY tutaj:\n"
+
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "Zasilanie mikrokontrolera gwałtownie spadło. Proszę upewnić się,\n"
+#~ "że zasilanie jest wystarczające dla całego obwodu in nacisnąć reset (po "
+#~ "odmontowaniu CIRCUITPY).\n"
+
+#~ msgid ""
+#~ "The reset button was pressed while booting CircuitPython. Press again to "
+#~ "exit safe mode.\n"
+#~ msgstr ""
+#~ "Przycisk reset został wciśnięty podczas startu CircuitPythona. Wciśnij go "
+#~ "ponownie aby wyjść z trybu bezpieczeństwa.\n"
+
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Indeks kafelka musi być pomiędzy 0 a 255 włącznie"
 
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "By wyjść, proszę zresetować płytkę bez "
+
 #~ msgid "UUID integer value not in range 0 to 0xffff"
 #~ msgstr "Wartość UUID poza zakresem 0 do 0xffff"
 
 #~ msgid "Voice index too high"
 #~ msgstr "Zbyt wysoki indeks głosu"
 
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Uruchomiono w trybie bezpieczeństwa, gdyż nastąpiło coś nieoczekiwanego.\n"
+
 #~ msgid "bad GATT role"
 #~ msgstr "zła rola GATT"
 
+#, c-format
+#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
+#~ msgstr "byteorder musi być typu ByteOrder (jest %s)"
+
 #~ msgid "characteristics includes an object that is not a Characteristic"
 #~ msgstr ""
 #~ "charakterystyki zawierają obiekt, który nie jest typu Characteristic"
@@ -2841,3 +2881,12 @@ msgstr "zerowy krok"
 
 #~ msgid "tile index out of bounds"
 #~ msgstr "indeks kafelka poza zakresem"
+
+#~ msgid "time.struct_time() takes exactly 1 argument"
+#~ msgstr "time.struct_time() wymaga jednego argumentu"
+
+#~ msgid "timeout >100 (units are now seconds, not msecs)"
+#~ msgstr "timeout > 100 (jednostkami są sekundy)"
+
+#~ msgid "write_args must be a list, tuple, or None"
+#~ msgstr "write_args musi być listą, krotką lub None"

locale/pt_BR.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Arquivo \"%q\""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 #, fuzzy
 msgid "%q must be >= 1"
 msgstr "buffers devem ser o mesmo tamanho"
@@ -121,6 +135,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr ""
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -291,7 +309,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -359,6 +377,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, fuzzy, c-format
@@ -378,11 +400,6 @@ msgstr "Os bytes devem estar entre 0 e 255."
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -401,6 +418,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr "Não pode obter a temperatura. status: 0x%02x"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@@ -445,6 +466,16 @@ msgstr "Não é possível ler sem um pino MOSI"
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Inicialização do pino de Clock falhou."
@@ -484,25 +515,30 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Não pôde alocar primeiro buffer"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Não pôde alocar segundo buffer"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -561,11 +597,15 @@ msgid "Expected a %q"
 msgstr "Esperado um"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 #, fuzzy
 msgid "Expected a Characteristic"
 msgstr "Não é possível adicionar Característica."
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -585,11 +625,6 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Falha ao enviar comando."
@@ -599,15 +634,6 @@ msgstr "Falha ao enviar comando."
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Falha ao alocar buffer RX"
@@ -618,10 +644,6 @@ msgstr "Falha ao alocar buffer RX"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Falha ao alocar buffer RX de %d bytes"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -630,117 +652,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-#, fuzzy
-msgid "Failed to discover services"
-msgstr "Não pode parar propaganda. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy
-msgid "Failed to get softdevice state"
-msgstr "Não pode parar propaganda. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, fuzzy, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, fuzzy, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Não é possível adicionar o UUID de 128 bits específico do fornecedor."
-
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, fuzzy, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, fuzzy, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Arquivo já existe"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
@@ -781,6 +713,14 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -808,6 +748,10 @@ msgstr ""
 msgid "Invalid buffer size"
 msgstr "Arquivo inválido"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -908,13 +852,6 @@ msgstr "Tamanho deve ser um int"
 msgid "Length must be non-negative"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "Inicialização do pino MISO falhou"
@@ -929,11 +866,11 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
@@ -944,6 +881,10 @@ msgstr ""
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1002,6 +943,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #, fuzzy
@@ -1041,10 +986,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -1138,7 +1079,7 @@ msgstr "Rodando em modo seguro! Atualização automática está desligada.\n"
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Rodando em modo seguro! Não está executando o código salvo.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL precisa de um pull up"
 
@@ -1147,7 +1088,6 @@ msgid "Sample rate must be positive"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Taxa de amostragem muito alta. Deve ser menor que %d"
@@ -1185,10 +1125,7 @@ msgstr ""
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1199,18 +1136,11 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@@ -1243,10 +1173,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Para sair, por favor, reinicie a placa sem "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Muitos canais na amostra."
@@ -1320,11 +1246,36 @@ msgstr "Não é possível gravar no nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Taxa de transmissão não suportada"
@@ -1374,9 +1325,12 @@ msgid ""
 "To list built-in modules please do `help(\"modules\")`.\n"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Writes not supported on Characteristic"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
-msgid ""
+msgid "You are in safe mode: something unanticipated happened.\n"
-"You are running in safe mode which means something unanticipated happened.\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1516,8 +1470,7 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1845,7 +1798,7 @@ msgstr "argumentos extras de palavras-chave passados"
 msgid "extra positional arguments given"
 msgstr "argumentos extra posicionais passados"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -2198,7 +2151,7 @@ msgstr ""
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr ""
 
@@ -2379,11 +2332,6 @@ msgstr "estouro de fila"
 msgid "rawbuf is not the same size as buf"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-#, fuzzy
-msgid "readonly attribute"
-msgstr "atributo ilegível"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2525,12 +2473,8 @@ msgstr "Limite deve estar no alcance de 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2691,10 +2635,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""
@@ -2754,7 +2694,7 @@ msgstr "passo zero"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Falha ao alocar buffer RX"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
@@ -2762,7 +2702,7 @@ msgstr "passo zero"
 #~ msgid "Failed to add service"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
@@ -2770,7 +2710,7 @@ msgstr "passo zero"
 #~ msgid "Failed to change softdevice state"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
@@ -2778,14 +2718,35 @@ msgstr "passo zero"
 #~ msgid "Failed to create mutex"
 #~ msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to discover services"
+#~ msgstr "Não pode parar propaganda. status: 0x%02x"
+
+#, fuzzy
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Não pode parar propaganda. status: 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to notify or indicate attribute value, err %0x04x"
 #~ msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to read attribute value, err %0x04x"
 #~ msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
+
+#, fuzzy
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr ""
+#~ "Não é possível adicionar o UUID de 128 bits específico do fornecedor."
+
 #, fuzzy
 #~ msgid "Failed to release mutex"
 #~ msgstr "Não é possível ler o valor do atributo. status: 0x%02x"
@@ -2794,7 +2755,7 @@ msgstr "passo zero"
 #~ msgid "Failed to start advertising"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
@@ -2802,14 +2763,26 @@ msgstr "passo zero"
 #~ msgid "Failed to start scanning"
 #~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Não é possível iniciar o anúncio. status: 0x%02x"
+
 #, fuzzy
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
-#, fuzzy, c-format
+#, fuzzy
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Não pode parar propaganda. status: 0x%02x"
 
+#, fuzzy
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
+
+#, fuzzy
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Não é possível gravar o valor do atributo. status: 0x%02x"
+
 #~ msgid "GPIO16 does not support pull up."
 #~ msgstr "GPIO16 não suporta pull up."
 
@@ -2868,6 +2841,9 @@ msgstr "passo zero"
 #~ msgid "STA required"
 #~ msgstr "STA requerido"
 
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Para sair, por favor, reinicie a placa sem "
+
 #~ msgid "UART(%d) does not exist"
 #~ msgstr "UART(%d) não existe"
 
@@ -2950,6 +2926,10 @@ msgstr "passo zero"
 #~ msgid "pin does not have IRQ capabilities"
 #~ msgstr "Pino não tem recursos de IRQ"
 
+#, fuzzy
+#~ msgid "readonly attribute"
+#~ msgstr "atributo ilegível"
+
 #~ msgid "row must be packed and word aligned"
 #~ msgstr "Linha deve ser comprimida e com as palavras alinhadas"
 

locale/zh_Latn_pinyin.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-10-21 19:50-0700\n"
+"POT-Creation-Date: 2020-01-07 14:31-0800\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -25,6 +25,19 @@ msgstr ""
 "\n"
 "Dàimǎ yǐ wánchéng yùnxíng. Zhèngzài děngdài chóngxīn jiāzài.\n"
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr "  Wénjiàn \"%q\""
@@ -55,7 +68,8 @@ msgid "%q indices must be integers, not %s"
 msgstr "%q suǒyǐn bìxū shì zhěngshù, ér bùshì %s"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr "%q bìxū dàyú huò děngyú 1"
 
@@ -121,6 +135,10 @@ msgstr "'%s' zhěngshù %d bùzài fànwéi nèi %d.%d"
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr "'%s' zhěngshù 0x%x bù shìyòng yú yǎn mǎ 0x%x"
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -290,8 +308,8 @@ msgid "Array values should be single bytes."
 msgstr "Shùzǔ zhí yīnggāi shì dāngè zì jié."
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
-msgstr "MicroPython VM wèi yùnxíng shí chángshì duī fēnpèi.\n"
+msgstr ""
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -360,6 +378,10 @@ msgstr "Huǎnchōng qū chángdù%d tài dà. Tā bìxū xiǎoyú%d"
 msgid "Buffer must be at least length 1"
 msgstr "Huǎnchōng qū bìxū zhìshǎo chángdù 1"
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -378,11 +400,6 @@ msgstr "Zì jié bìxū jiè yú 0 dào 255 zhī jiān."
 msgid "Call super().__init__() before accessing native object."
 msgstr "Zài fǎngwèn běn jī wùjiàn zhīqián diàoyòng super().__init__()"
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr "Wúfǎ yǔ dotstar yīqǐ shǐyòng %s"
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -400,6 +417,10 @@ msgstr "Zài shūchū móshì xià wúfǎ huòqǔ lādòng"
 msgid "Cannot get temperature"
 msgstr "Wúfǎ huòqǔ wēndù"
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr "Wúfǎ shūchū tóng yīgè yǐn jiǎo shàng de liǎng gè píndào"
@@ -444,6 +465,16 @@ msgstr "Wúfǎ xiě rù MOSI de yǐn jiǎo."
 msgid "CharacteristicBuffer writing not provided"
 msgstr "Wèi tígōng zìfú huǎncún xiě rù"
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr "Shízhōng de yǐn jiǎo chūshǐhuà shībài."
@@ -482,26 +513,31 @@ msgstr "Fǔbài de .mpy wénjiàn"
 msgid "Corrupt raw code"
 msgstr "Sǔnhuài de yuánshǐ dàimǎ"
 
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Could not decode ble_uuid, err 0x%04x"
-msgstr "Wúfǎ jiěmǎ kě dú_uuid, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Wúfǎ chūshǐhuà UART"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate first buffer"
 msgstr "Wúfǎ fēnpèi dì yī gè huǎnchōng qū"
 
+#: shared-module/audiomp3/MP3File.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3File.c
 msgid "Couldn't allocate second buffer"
 msgstr "Wúfǎ fēnpèi dì èr gè huǎnchōng qū"
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
-msgstr "Bēngkuì dào HardFault_Handler.\n"
+msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -558,10 +594,14 @@ msgid "Expected a %q"
 msgstr "Yùqí %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr "Yùqí de tèdiǎn"
 
+#: shared-bindings/_pixelbuf/__init__.c
+msgid "Expected a PixelBuf instance"
+msgstr ""
+
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr "Yùqí fúwù"
@@ -580,11 +620,6 @@ msgstr "Qídài yīgè dìzhǐ"
 msgid "Expected tuple of length %d, got %d"
 msgstr "Qīwàng de chángdù wèi %d de yuán zǔ, dédào %d"
 
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed initiate attribute read, err 0x%04x"
-msgstr ""
-
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr "Fāsòng mìnglìng shībài."
@@ -594,15 +629,6 @@ msgstr "Fāsòng mìnglìng shībài."
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr "Wúfǎ huòdé mutex, err 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Service.c
-msgid "Failed to add characteristic, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to add descriptor, err 0x%04x"
-msgstr "Wúfǎ tiānjiā miáoshù fú, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr "Fēnpèi RX huǎnchōng shībài"
@@ -613,10 +639,6 @@ msgstr "Fēnpèi RX huǎnchōng shībài"
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr "Fēnpèi RX huǎnchōng qū%d zì jié shībài"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to change softdevice state, NRF_ERROR_%q"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
 msgstr ""
@@ -625,115 +647,27 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr "Liánjiē shībài: Chāoshí"
 
-#: ports/nrf/common-hal/_bleio/Service.c
+#: shared-module/audiomp3/MP3File.c
-msgid "Failed to create service, NRF_ERROR_%q"
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to discover services"
-msgstr "Fāxiàn fúwù shībài"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get local address"
-msgstr "Huòqǔ běndì dìzhǐ shībài"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to get softdevice state"
-msgstr "Wúfǎ huòdé ruǎnjiàn shèbèi zhuàngtài"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to notify or indicate attribute value, err 0x%04x"
-msgstr "Wúfǎ tōngzhī huò xiǎnshì shǔxìng zhí, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to pair"
-msgstr "Pèiduì shībài"
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to read CCCD value, err 0x%04x"
-msgstr "Dòu qǔ CCCD zhí, err 0x%04x shībài"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read attribute value, err 0x%04x"
-msgstr "Dòu qǔ shǔxìng zhí shībài, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to read gatts value, err 0x%04x"
-msgstr "Wúfǎ dòu qǔ gatts zhí, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/UUID.c
-#, c-format
-msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
-msgstr "Wúfǎ zhùcè màizhǔ tèdìng de UUID, err 0x%04x"
-
 #: ports/nrf/sd_mutex.c
 #, c-format
 msgid "Failed to release mutex, err 0x%04x"
 msgstr "Wúfǎ shìfàng mutex, err 0x%04x"
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
+#: supervisor/shared/safe_mode.c
-msgid "Failed to start advertising, NRF_ERROR_%q"
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start connecting, error 0x%04x"
-msgstr "Wúfǎ kāishǐ liánjiē, cuòwù 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Connection.c
-msgid "Failed to start pairing, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-#, c-format
-msgid "Failed to start scanning, err 0x%04x"
-msgstr "Qǐdòng sǎomiáo shībài, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/Adapter.c
-msgid "Failed to stop advertising, NRF_ERROR_%q"
-msgstr ""
-
-#: ports/nrf/common-hal/_bleio/Characteristic.c
-#, c-format
-msgid "Failed to write CCCD, err 0x%04x"
-msgstr "Wúfǎ xiě rù CCCD, cuòwù 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write attribute value, err 0x%04x"
-msgstr "Xiě rù shǔxìng zhí shībài, err 0x%04x"
-
-#: ports/nrf/common-hal/_bleio/__init__.c
-#, c-format
-msgid "Failed to write gatts value, err 0x%04x"
-msgstr "Xiě rù gatts zhí,err 0x%04x shībài"
-
 #: py/moduerrno.c
 msgid "File exists"
 msgstr "Wénjiàn cúnzài"
 
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash erase failed"
-msgstr "Flash cā chú shībài"
-
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash erase failed to start, err 0x%04x"
-msgstr "Flash cā chú shībài, err 0x%04x"
-
-#: ports/nrf/peripherals/nrf/nvm.c
 msgid "Flash write failed"
 msgstr "Flash xiě rù shībài"
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
-msgstr "Flash xiě rù shībài, err 0x%04x"
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr "Pínlǜ bǔhuò gāo yú nénglì. Bǔhuò zàntíng."
@@ -776,6 +710,14 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè"
 msgid "Input/output error"
 msgstr "Shūrù/shūchū cuòwù"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient authentication"
+msgstr "Rènzhèng bùzú"
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid "Insufficient encryption"
+msgstr "Jiāmì bùzú"
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -802,6 +744,10 @@ msgstr "Měi gè zhí de wèi wúxiào"
 msgid "Invalid buffer size"
 msgstr "Wúxiào de huǎnchōng qū dàxiǎo"
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr "Wúxiào de bǔhuò zhōuqí. Yǒuxiào fànwéi: 1-500"
@@ -900,17 +846,6 @@ msgstr "Chángdù bìxū shì yīgè zhěngshù"
 msgid "Length must be non-negative"
 msgstr "Chángdù bìxū shìfēi fùshù"
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-"Kàn lái wǒmen de héxīn CircuitPython dàimǎ bēngkuì dé hěn lìhài. Āi yōu!\n"
-"Qǐng zài https://Github.Com/adafruit/circuitpython/issues\n"
-"shàng tíjiāo yīgè wèntí, qízhōng bāohán nín de CIRCUITPY qūdòngqì de nèiróng "
-"hé cǐ xiāoxī:\n"
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr "MISO yǐn jiǎo chūshǐhuà shībài."
@@ -925,12 +860,12 @@ msgid "Maximum x value when mirrored is %d"
 msgstr "Jìngxiàng shí de zuìdà X zhí wèi%d"
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr "MicroPython NLR tiàoyuè shībài. Kěnéng nèicún fǔbài.\n"
+msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
-msgstr "MicroPython zhìmìng cuòwù.\n"
+msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -940,6 +875,10 @@ msgstr "Màikèfēng qǐdòng yánchí bìxū zài 0.0 Dào 1.0 De fànwéi nèi
 msgid "Must be a %q subclass."
 msgstr "Bìxū shì %q zi lèi."
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr "Zhège tèzhēng méiyǒu CCCD"
@@ -998,6 +937,10 @@ msgstr "Shèbèi shàng méiyǒu kònggé"
 msgid "No such file/directory"
 msgstr "Méiyǒu cǐ lèi wénjiàn/mùlù"
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -1037,10 +980,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr "Jǐn zhīchí 1 bù qiēpiàn"
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr "Guò cǎiyàng bìxū shì 8 de bèishù."
@@ -1133,7 +1072,7 @@ msgstr "Zài ānquán móshì xià yùnxíng! Zìdòng chóngxīn jiāzài yǐ g
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr "Zài ānquán móshì xià yùnxíng! Bù yùnxíng yǐ bǎocún de dàimǎ.\n"
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA huò SCL xūyào lādòng"
 
@@ -1142,7 +1081,6 @@ msgid "Sample rate must be positive"
 msgstr "Cǎiyàng lǜ bìxū wèi zhèng shù"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr "Cǎiyàng lǜ tài gāo. Tā bìxū xiǎoyú %d"
@@ -1180,16 +1118,8 @@ msgstr "Liú quēshǎo readinto() huò write() fāngfǎ."
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
+"Please increase the stack size if you know how, or if not:"
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
 msgstr ""
-"Yóuyú duīzhàn tài xiǎo, huánliú Python rè sǔnhuài.\n"
-"Qǐng zēngjiā duīzhàn chǐcùn xiànzhì, ránhòu chóngxīn shèzhì (zài dànchū "
-"CIRCUITPY).\n"
-"Rúguǒ nín méiyǒu gǎibiàn duīzhàn, qǐng zài cǐ chù tíchū yīgè wèntí, bìng zài "
-"rù nín de CIRCUITPY qūdòngqì:\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1201,22 +1131,10 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
+"The microcontroller's power dipped. Make sure your power supply provides\n"
-"provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
-"Wēi kòngzhì qì de diànliàng bèi chōng chū. Qǐng quèbǎo nín de diànyuán wèi\n"
-"zhěnggè diànlù tígōng zúgòu de diànyuán bìng àn xià fùwèi (zài dànchū "
-"CIRCUITPY hòu).\n"
-
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-"Qǐdòng CircuitPython shí, chóng zhì ànniǔ bèi àn xià. Zàicì àn xià yǐ tuìchū "
-"ānquán móshì\n"
 
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
@@ -1250,10 +1168,6 @@ msgstr "Píng pū zhí chāochū fànwéi"
 msgid "Tile width must exactly divide bitmap width"
 msgstr "Píng pū kuāndù bìxū huàfēn wèi tú kuāndù"
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng "
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr "Chōuyàng zhōng de píndào tài duō."
@@ -1327,11 +1241,36 @@ msgstr "Wúfǎ xiě rù nvm."
 msgid "Unexpected nrfx uuid type"
 msgstr "Yìwài de nrfx uuid lèixíng"
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown gatt error: 0x%04x"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown security error: 0x%04x"
+msgstr ""
+
+#: ports/nrf/common-hal/_bleio/__init__.c
+#, c-format
+msgid "Unknown soft device error: %04x"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
 msgstr "RHS (yùqí %d, huòdé %d) shàng wèi pǐpèi de xiàngmù."
 
+#: ports/nrf/common-hal/_bleio/__init__.c
+msgid ""
+"Unspecified issue. Can be that the pairing prompt on the other device was "
+"declined or ignored."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Bù zhīchí de baudrate"
@@ -1385,12 +1324,13 @@ msgstr ""
 "\n"
 "Ruò yào liè chū nèizài de mókuài, qǐng qǐng zuò yǐxià `help(\"modules\")`.\n"
 
-#: supervisor/shared/safe_mode.c
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
-msgid ""
+msgid "Writes not supported on Characteristic"
-"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
-"Nǐ zhèngzài ānquán móshì xià yùnxíng, zhè yì wèi zhuó yìwài fāshēng de "
-"shìqíng.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid "You requested starting safe mode by "
@@ -1526,9 +1466,8 @@ msgid "byte code not implemented"
 msgstr "zì jié dàimǎ wèi zhíxíng"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
+msgid "byteorder is not a string"
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgstr ""
-msgstr "zì jié bùshì zì jié xù shílì (yǒu %s)"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 msgid "bytes > 8 bits not supported"
@@ -1857,7 +1796,7 @@ msgstr "éwài de guānjiàn cí cānshù"
 msgid "extra positional arguments given"
 msgstr "gěi chūle éwài de wèizhì cānshù"
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr "wénjiàn bìxū shì zài zì jié móshì xià dǎkāi de wénjiàn"
@@ -2212,7 +2151,7 @@ msgstr "méiyǒu mókuài '%q'"
 msgid "no reset pin available"
 msgstr "Méiyǒu kěyòng de fùwèi yǐn jiǎo"
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr "méiyǒu cǐ shǔxìng"
 
@@ -2393,10 +2332,6 @@ msgstr "duìliè yìchū"
 msgid "rawbuf is not the same size as buf"
 msgstr "yuánshǐ huǎnchōng qū hé huǎnchōng qū de dàxiǎo bùtóng"
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr "zhǐ dú shǔxìng"
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr "xiāngduì dǎorù"
@@ -2539,13 +2474,9 @@ msgstr "yùzhí bìxū zài fànwéi 0-65536"
 msgid "time.struct_time() takes a 9-sequence"
 msgstr "time.struct_time() xūyào 9 xùliè"
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr "time.struct_time() xūyào wánquán 1 cānshù"
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
-msgstr "chāoshí >100 (dānwèi shì miǎo, ér bùshì háomiǎo)"
+msgstr "Chāo shí shíjiān bìxū wèi 0.0 Dào 100.0 Miǎo"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
@@ -2704,10 +2635,6 @@ msgstr "zhí jìshù bìxū wèi > 0"
 msgid "window must be <= interval"
 msgstr "Chuāngkǒu bìxū shì <= jiàngé"
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr "xiě cānshù bìxū shì yuán zǔ, lièbiǎo huò None"
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr "cānshù shù cuòwù"
@@ -2735,6 +2662,13 @@ msgstr "líng bù"
 #~ msgid "Address is not %d bytes long or is in wrong format"
 #~ msgstr "Dìzhǐ bùshì %d zì jié zhǎng, huòzhě géshì cuòwù"
 
+#~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
+#~ msgstr "MicroPython VM wèi yùnxíng shí chángshì duī fēnpèi.\n"
+
+#, c-format
+#~ msgid "Can not use dotstar with %s"
+#~ msgstr "Wúfǎ yǔ dotstar yīqǐ shǐyòng %s"
+
 #~ msgid "Can't add services in Central mode"
 #~ msgstr "Wúfǎ zài zhōngyāng móshì xià tiānjiā fúwù"
 
@@ -2756,6 +2690,12 @@ msgstr "líng bù"
 #~ msgid "Characteristic already in use by another Service."
 #~ msgstr "Qítā fúwù bùmén yǐ shǐyòng de gōngnéng."
 
+#~ msgid "Could not decode ble_uuid, err 0x%04x"
+#~ msgstr "Wúfǎ jiěmǎ kě dú_uuid, err 0x%04x"
+
+#~ msgid "Crash into the HardFault_Handler.\n"
+#~ msgstr "Bēngkuì dào HardFault_Handler.\n"
+
 #~ msgid "Data too large for the advertisement packet"
 #~ msgstr "Guǎnggào bāo de shùjù tài dà"
 
@@ -2765,21 +2705,21 @@ msgstr "líng bù"
 #~ msgid "Failed to acquire mutex"
 #~ msgstr "Wúfǎ huòdé mutex"
 
-#, c-format
 #~ msgid "Failed to add characteristic, err 0x%04x"
 #~ msgstr "Tiānjiā tèxìng shībài, err 0x%04x"
 
+#~ msgid "Failed to add descriptor, err 0x%04x"
+#~ msgstr "Wúfǎ tiānjiā miáoshù fú, err 0x%04x"
+
 #~ msgid "Failed to add service"
 #~ msgstr "Tiānjiā fúwù shībài"
 
-#, c-format
 #~ msgid "Failed to add service, err 0x%04x"
 #~ msgstr "Tiānjiā fúwù shībài, err 0x%04x"
 
 #~ msgid "Failed to change softdevice state"
 #~ msgstr "Gēnggǎi ruǎn shèbèi zhuàngtài shībài"
 
-#, c-format
 #~ msgid "Failed to configure advertising, err 0x%04x"
 #~ msgstr "Wúfǎ pèizhì guǎnggào, cuòwù 0x%04x"
 
@@ -2789,41 +2729,87 @@ msgstr "líng bù"
 #~ msgid "Failed to continue scanning"
 #~ msgstr "Jìxù sǎomiáo shībài"
 
-#, c-format
 #~ msgid "Failed to continue scanning, err 0x%04x"
 #~ msgstr "Jìxù sǎomiáo shībài, err 0x%04x"
 
 #~ msgid "Failed to create mutex"
 #~ msgstr "Wúfǎ chuàngjiàn hù chì suǒ"
 
+#~ msgid "Failed to discover services"
+#~ msgstr "Fāxiàn fúwù shībài"
+
+#~ msgid "Failed to get local address"
+#~ msgstr "Huòqǔ běndì dìzhǐ shībài"
+
+#~ msgid "Failed to get softdevice state"
+#~ msgstr "Wúfǎ huòdé ruǎnjiàn shèbèi zhuàngtài"
+
+#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
+#~ msgstr "Wúfǎ tōngzhī huò xiǎnshì shǔxìng zhí, err 0x%04x"
+
+#~ msgid "Failed to pair"
+#~ msgstr "Pèiduì shībài"
+
+#~ msgid "Failed to read CCCD value, err 0x%04x"
+#~ msgstr "Dòu qǔ CCCD zhí, err 0x%04x shībài"
+
+#~ msgid "Failed to read attribute value, err 0x%04x"
+#~ msgstr "Dòu qǔ shǔxìng zhí shībài, err 0x%04x"
+
+#~ msgid "Failed to read gatts value, err 0x%04x"
+#~ msgstr "Wúfǎ dòu qǔ gatts zhí, err 0x%04x"
+
+#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
+#~ msgstr "Wúfǎ zhùcè màizhǔ tèdìng de UUID, err 0x%04x"
+
 #~ msgid "Failed to release mutex"
 #~ msgstr "Wúfǎ shìfàng mutex"
 
-#, c-format
 #~ msgid "Failed to set device name, err 0x%04x"
 #~ msgstr "Wúfǎ shèzhì shèbèi míngchēng, cuòwù 0x%04x"
 
 #~ msgid "Failed to start advertising"
 #~ msgstr "Qǐdòng guǎnggào shībài"
 
-#, c-format
 #~ msgid "Failed to start advertising, err 0x%04x"
 #~ msgstr "Qǐdòng guǎnggào shībài, err 0x%04x"
 
-#, c-format
+#~ msgid "Failed to start connecting, error 0x%04x"
+#~ msgstr "Wúfǎ kāishǐ liánjiē, cuòwù 0x%04x"
+
 #~ msgid "Failed to start pairing, error 0x%04x"
 #~ msgstr "Wúfǎ kāishǐ pèiduì, cuòwù 0x%04x"
 
 #~ msgid "Failed to start scanning"
 #~ msgstr "Qǐdòng sǎomiáo shībài"
 
+#~ msgid "Failed to start scanning, err 0x%04x"
+#~ msgstr "Qǐdòng sǎomiáo shībài, err 0x%04x"
+
 #~ msgid "Failed to stop advertising"
 #~ msgstr "Wúfǎ tíngzhǐ guǎnggào"
 
-#, c-format
 #~ msgid "Failed to stop advertising, err 0x%04x"
 #~ msgstr "Wúfǎ tíngzhǐ guǎnggào, err 0x%04x"
 
+#~ msgid "Failed to write CCCD, err 0x%04x"
+#~ msgstr "Wúfǎ xiě rù CCCD, cuòwù 0x%04x"
+
+#~ msgid "Failed to write attribute value, err 0x%04x"
+#~ msgstr "Xiě rù shǔxìng zhí shībài, err 0x%04x"
+
+#~ msgid "Failed to write gatts value, err 0x%04x"
+#~ msgstr "Xiě rù gatts zhí,err 0x%04x shībài"
+
+#~ msgid "Flash erase failed"
+#~ msgstr "Flash cā chú shībài"
+
+#~ msgid "Flash erase failed to start, err 0x%04x"
+#~ msgstr "Flash cā chú shībài, err 0x%04x"
+
+#~ msgid "Flash write failed to start, err 0x%04x"
+#~ msgstr "Flash xiě rù shībài, err 0x%04x"
+
 #~ msgid "Invalid bit clock pin"
 #~ msgstr "Wúxiào de wèi shízhōng yǐn jiǎo"
 
@@ -2833,6 +2819,22 @@ msgstr "líng bù"
 #~ msgid "Invalid data pin"
 #~ msgstr "Wúxiào de shùjù yǐn jiǎo"
 
+#~ msgid ""
+#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+#~ " with the contents of your CIRCUITPY drive and this message:\n"
+#~ msgstr ""
+#~ "Kàn lái wǒmen de héxīn CircuitPython dàimǎ bēngkuì dé hěn lìhài. Āi yōu!\n"
+#~ "Qǐng zài https://Github.Com/adafruit/circuitpython/issues\n"
+#~ "shàng tíjiāo yīgè wèntí, qízhōng bāohán nín de CIRCUITPY qūdòngqì de "
+#~ "nèiróng hé cǐ xiāoxī:\n"
+
+#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+#~ msgstr "MicroPython NLR tiàoyuè shībài. Kěnéng nèicún fǔbài.\n"
+
+#~ msgid "MicroPython fatal error.\n"
+#~ msgstr "MicroPython zhìmìng cuòwù.\n"
+
 #~ msgid "Must be a Group subclass."
 #~ msgstr "Bìxū shì fēnzǔ zi lèi."
 
@@ -2854,22 +2856,69 @@ msgstr "líng bù"
 #~ msgstr ""
 #~ "Jǐn zhīchí dān sè, suǒyǐn 8bpp hé 16bpp huò gèng dà de BMP: %d bpp tígōng"
 
-#, c-format
+#~ msgid "Only slices with step=1 (aka None) are supported"
+#~ msgstr "Jǐn zhīchí 1 bù qiēpiàn"
+
 #~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
 #~ msgstr "Ruǎn shèbèi wéihù, id: 0X%08lX, pc: 0X%08lX"
 
+#~ msgid ""
+#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
+#~ "Please increase stack size limits and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ "If you didn't change the stack, then file an issue here with the contents "
+#~ "of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Yóuyú duīzhàn tài xiǎo, huánliú Python rè sǔnhuài.\n"
+#~ "Qǐng zēngjiā duīzhàn chǐcùn xiànzhì, ránhòu chóngxīn shèzhì (zài dànchū "
+#~ "CIRCUITPY).\n"
+#~ "Rúguǒ nín méiyǒu gǎibiàn duīzhàn, qǐng zài cǐ chù tíchū yīgè wèntí, bìng "
+#~ "zài rù nín de CIRCUITPY qūdòngqì:\n"
+
+#~ msgid ""
+#~ "The microcontroller's power dipped. Please make sure your power supply "
+#~ "provides\n"
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "Wēi kòngzhì qì de diànliàng bèi chōng chū. Qǐng quèbǎo nín de diànyuán "
+#~ "wèi\n"
+#~ "zhěnggè diànlù tígōng zúgòu de diànyuán bìng àn xià fùwèi (zài dànchū "
+#~ "CIRCUITPY hòu).\n"
+
+#~ msgid ""
+#~ "The reset button was pressed while booting CircuitPython. Press again to "
+#~ "exit safe mode.\n"
+#~ msgstr ""
+#~ "Qǐdòng CircuitPython shí, chóng zhì ànniǔ bèi àn xià. Zàicì àn xià yǐ "
+#~ "tuìchū ānquán móshì\n"
+
 #~ msgid "Tile indices must be 0 - 255"
 #~ msgstr "Píng pū zhǐshù bìxū wèi 0 - 255"
 
+#~ msgid "To exit, please reset the board without "
+#~ msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng "
+
 #~ msgid "UUID integer value not in range 0 to 0xffff"
 #~ msgstr "UUID zhěngshù zhí bùzài fànwéi 0 zhì 0xffff"
 
 #~ msgid "Voice index too high"
 #~ msgstr "Yǔyīn suǒyǐn tài gāo"
 
+#~ msgid ""
+#~ "You are running in safe mode which means something unanticipated "
+#~ "happened.\n"
+#~ msgstr ""
+#~ "Nǐ zhèngzài ānquán móshì xià yùnxíng, zhè yì wèi zhuó yìwài fāshēng de "
+#~ "shìqíng.\n"
+
 #~ msgid "bad GATT role"
 #~ msgstr "zǒng xiédìng de bùliáng juésè"
 
+#, c-format
+#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
+#~ msgstr "zì jié bùshì zì jié xù shílì (yǒu %s)"
+
 #~ msgid "characteristics includes an object that is not a Characteristic"
 #~ msgstr "tèxìng bāokuò bùshì zìfú de wùtǐ"
 
@@ -2891,8 +2940,17 @@ msgstr "líng bù"
 #~ msgid "tile index out of bounds"
 #~ msgstr "kuài suǒyǐn chāochū fànwéi"
 
+#~ msgid "time.struct_time() takes exactly 1 argument"
+#~ msgstr "time.struct_time() xūyào wánquán 1 cānshù"
+
+#~ msgid "timeout >100 (units are now seconds, not msecs)"
+#~ msgstr "chāoshí >100 (dānwèi shì miǎo, ér bùshì háomiǎo)"
+
 #~ msgid "too many arguments"
 #~ msgstr "tài duō cānshù"
 
 #~ msgid "unsupported bitmap type"
 #~ msgstr "bù zhīchí de bitmap lèixíng"
+
+#~ msgid "write_args must be a list, tuple, or None"
+#~ msgstr "xiě cānshù bìxū shì yuán zǔ, lièbiǎo huò None"

main.c

@@ -204,7 +204,7 @@ void cleanup_after_vm(supervisor_allocation* heap) {
 
 bool run_code_py(safe_mode_t safe_mode) {
     bool serial_connected_at_start = serial_connected();
-    #ifdef CIRCUITPY_AUTORELOAD_DELAY_MS
+    #if CIRCUITPY_AUTORELOAD_DELAY_MS > 0
     if (serial_connected_at_start) {
         serial_write("\n");
         if (autoreload_is_enabled()) {
@@ -264,9 +264,7 @@ bool run_code_py(safe_mode_t safe_mode) {
     rgb_status_animation_t animation;
     prep_rgb_status_animation(&result, found_main, safe_mode, &animation);
     while (true) {
-        #ifdef MICROPY_VM_HOOK_LOOP
+        RUN_BACKGROUND_TASKS;
-            MICROPY_VM_HOOK_LOOP
-        #endif
         if (reload_requested) {
             reload_requested = false;
             return true;

ports/atmel-samd/Makefile

@@ -122,7 +122,16 @@ else
   ifdef CFLAGS_INLINE_LIMIT
     CFLAGS += -finline-limit=$(CFLAGS_INLINE_LIMIT)
   endif
+
   CFLAGS += -flto -flto-partition=none
+
+  ifeq ($(CIRCUITPY_SMALL_BUILD),1)
+    CFLAGS += --param inline-unit-growth=15 --param max-inline-insns-auto=20
+  endif
+
+  ifdef CFLAGS_BOARD
+    CFLAGS += $(CFLAGS_BOARD)
+  endif
 endif
 
 CFLAGS += $(INC) -Wall -Werror -std=gnu11 -nostdlib $(BASE_CFLAGS) $(CFLAGS_MOD) $(COPT)
@@ -148,7 +157,7 @@ endif
 
 
 
-LDFLAGS = $(CFLAGS) -nostartfiles -fshort-enums -Wl,-nostdlib -Wl,-T,$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
+LDFLAGS = $(CFLAGS) -nostartfiles -fshort-enums -Wl,-nostdlib -Wl,-T,$(GENERATED_LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
 LIBS := -lgcc -lc
 
 # Use toolchain libm if we're not using our own.
@@ -224,7 +233,7 @@ SRC_C = \
 	lib/oofatfs/ff.c \
 	lib/oofatfs/option/ccsbcs.c \
 	lib/timeutils/timeutils.c \
-	lib/tinyusb/src/portable/microchip/$(CHIP_FAMILY)/dcd_$(CHIP_FAMILY).c \
+	lib/tinyusb/src/portable/microchip/samd/dcd_samd.c \
 	lib/utils/buffer_helper.c \
 	lib/utils/context_manager_helpers.c \
 	lib/utils/interrupt_char.c \
@@ -292,12 +301,17 @@ SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE))
                              $(addprefix shared-module/, $(SRC_SHARED_MODULE)) \
                              $(addprefix shared-module/, $(SRC_SHARED_MODULE_INTERNAL))
 
+# There may be duplicates between SRC_COMMON_HAL_EXPANDED and SRC_SHARED_MODULE_EXPANDED,
+# because a few modules have files both in common-hal/ and shared-modules/.
+# Doing a $(sort ...) removes duplicates as part of sorting.
+SRC_COMMON_HAL_SHARED_MODULE_EXPANDED = $(sort $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED))
+
+
 SRC_S = supervisor/$(CHIP_FAMILY)_cpu.s
 
 OBJ = $(PY_O) $(SUPERVISOR_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
 OBJ += $(addprefix $(BUILD)/, $(SRC_ASF:.c=.o))
-OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_EXPANDED:.c=.o))
+OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_SHARED_MODULE_EXPANDED:.c=.o))
-OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
 ifeq ($(INTERNAL_LIBM),1)
 OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o))
 endif
@@ -310,10 +324,10 @@ SRC_QSTR_PREPROCESSOR += peripherals/samd/$(CHIP_FAMILY)/clocks.c
 
 all: $(BUILD)/firmware.bin $(BUILD)/firmware.uf2
 
-$(BUILD)/firmware.elf: $(OBJ)
+$(BUILD)/firmware.elf: $(OBJ) $(GENERATED_LD_FILE)
 	$(STEPECHO) "LINK $@"
-	$(Q)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
+	$(Q)$(CC) -o $@ $(LDFLAGS) $(OBJ) -Wl,--start-group $(LIBS) -Wl,--end-group
-	$(Q)$(SIZE) $@ | $(PYTHON3) $(TOP)/tools/build_memory_info.py $(LD_FILE)
+	$(Q)$(SIZE) $@ | $(PYTHON3) $(TOP)/tools/build_memory_info.py $(GENERATED_LD_FILE)
 
 $(BUILD)/firmware.bin: $(BUILD)/firmware.elf
 	$(STEPECHO) "Create $@"

ports/atmel-samd/background.c

@@ -28,6 +28,7 @@
 #include "audio_dma.h"
 #include "tick.h"
 #include "supervisor/filesystem.h"
+#include "supervisor/shared/tick.h"
 #include "supervisor/usb.h"
 
 #include "py/runtime.h"
@@ -44,6 +45,23 @@ bool stack_ok_so_far = true;
 
 static bool running_background_tasks = false;
 
+#ifdef MONITOR_BACKGROUND_TASKS
+// PB03 is physical pin "SCL" on the Metro M4 express
+// so you can't use this code AND an i2c peripheral
+// at the same time unless you change this
+STATIC void start_background_task(void) {
+    REG_PORT_DIRSET1 = (1<<3);
+    REG_PORT_OUTSET1 = (1<<3);
+}
+
+STATIC void finish_background_task(void) {
+    REG_PORT_OUTCLR1 = (1<<3);
+}
+#else
+STATIC void start_background_task(void) {}
+STATIC void finish_background_task(void) {}
+#endif
+
 void background_tasks_reset(void) {
     running_background_tasks = false;
 }
@@ -53,6 +71,9 @@ void run_background_tasks(void) {
     if (running_background_tasks) {
         return;
     }
+
+    start_background_task();
+
     assert_heap_ok();
     running_background_tasks = true;
 
@@ -71,9 +92,10 @@ void run_background_tasks(void) {
     running_background_tasks = false;
     assert_heap_ok();
 
-    last_finished_tick = ticks_ms;
+    last_finished_tick = supervisor_ticks_ms64();
+    finish_background_task();
 }
 
 bool background_tasks_ok(void) {
-    return ticks_ms - last_finished_tick < 1000;
+    return supervisor_ticks_ms64() - last_finished_tick < 1000;
 }

ports/atmel-samd/bindings/samd/Clock.c

@@ -163,3 +163,263 @@ const mp_obj_type_t samd_clock_type = {
     .print = samd_clock_print,
     .locals_dict = (mp_obj_t)&samd_clock_locals_dict,
 };
+
+#ifdef SAMD21
+
+#ifdef SAMD21_EXPOSE_ALL_CLOCKS
+CLOCK_SOURCE(XOSC);
+CLOCK_SOURCE(GCLKIN);
+CLOCK_SOURCE(GCLKGEN1);
+CLOCK_SOURCE(OSCULP32K);
+#endif
+CLOCK_SOURCE(OSC32K);
+CLOCK_SOURCE(XOSC32K);
+#ifdef SAMD21_EXPOSE_ALL_CLOCKS
+CLOCK_SOURCE(OSC8M);
+CLOCK_SOURCE(DFLL48M);
+CLOCK_SOURCE(DPLL96M);
+
+CLOCK_GCLK_(SYSCTRL, DFLL48);
+CLOCK_GCLK_(SYSCTRL, FDPLL);
+CLOCK_GCLK_(SYSCTRL, FDPLL32K);
+CLOCK_GCLK(WDT);
+#endif
+CLOCK_GCLK(RTC);
+#ifdef SAMD21_EXPOSE_ALL_CLOCKS
+CLOCK_GCLK(EIC);
+CLOCK_GCLK(USB);
+CLOCK_GCLK_(EVSYS, 0);
+CLOCK_GCLK_(EVSYS, 1);
+CLOCK_GCLK_(EVSYS, 2);
+CLOCK_GCLK_(EVSYS, 3);
+CLOCK_GCLK_(EVSYS, 4);
+CLOCK_GCLK_(EVSYS, 5);
+CLOCK_GCLK_(EVSYS, 6);
+CLOCK_GCLK_(EVSYS, 7);
+CLOCK_GCLK_(EVSYS, 8);
+CLOCK_GCLK_(EVSYS, 9);
+CLOCK_GCLK_(EVSYS, 10);
+CLOCK_GCLK_(EVSYS, 11);
+CLOCK(SERCOMx_SLOW, 1, 19);
+CLOCK_GCLK_(SERCOM0, CORE);
+CLOCK_GCLK_(SERCOM1, CORE);
+CLOCK_GCLK_(SERCOM2, CORE);
+CLOCK_GCLK_(SERCOM3, CORE);
+CLOCK_GCLK_(SERCOM4, CORE);
+CLOCK_GCLK_(SERCOM5, CORE);
+CLOCK(TCC0_TCC1, 1, 26);
+CLOCK(TCC2_TCC3, 1, 27);
+CLOCK(TC4_TC5, 1, 28);
+CLOCK(TC6_TC7, 1, 29);
+CLOCK_GCLK(ADC);
+CLOCK_GCLK_(AC, DIG);
+CLOCK_GCLK_(AC, ANA);
+CLOCK_GCLK(DAC);
+CLOCK_GCLK(PTC);
+CLOCK_GCLK_(I2S, 0);
+CLOCK_GCLK_(I2S, 1);
+
+CLOCK(SYSTICK, 2, 0);
+#endif
+
+STATIC const mp_rom_map_elem_t samd_clock_global_dict_table[] = {
+#ifdef SAMD21_EXPOSE_ALL_CLOCKS
+    CLOCK_ENTRY(XOSC),
+    CLOCK_ENTRY(GCLKIN),
+    CLOCK_ENTRY(GCLKGEN1),
+    CLOCK_ENTRY(OSCULP32K),
+#endif
+    CLOCK_ENTRY(OSC32K),
+    CLOCK_ENTRY(XOSC32K),
+#ifdef SAMD21_EXPOSE_ALL_CLOCKS
+    CLOCK_ENTRY(OSC8M),
+    CLOCK_ENTRY(DFLL48M),
+    CLOCK_ENTRY(DPLL96M),
+    CLOCK_ENTRY_(SYSCTRL, DFLL48),
+    CLOCK_ENTRY_(SYSCTRL, FDPLL),
+    CLOCK_ENTRY_(SYSCTRL, FDPLL32K),
+    CLOCK_ENTRY(WDT),
+#endif
+    CLOCK_ENTRY(RTC),
+#ifdef SAMD21_EXPOSE_ALL_CLOCKS
+    CLOCK_ENTRY(EIC),
+    CLOCK_ENTRY(USB),
+    CLOCK_ENTRY_(EVSYS, 0),
+    CLOCK_ENTRY_(EVSYS, 1),
+    CLOCK_ENTRY_(EVSYS, 2),
+    CLOCK_ENTRY_(EVSYS, 3),
+    CLOCK_ENTRY_(EVSYS, 4),
+    CLOCK_ENTRY_(EVSYS, 5),
+    CLOCK_ENTRY_(EVSYS, 6),
+    CLOCK_ENTRY_(EVSYS, 7),
+    CLOCK_ENTRY_(EVSYS, 8),
+    CLOCK_ENTRY_(EVSYS, 9),
+    CLOCK_ENTRY_(EVSYS, 10),
+    CLOCK_ENTRY_(EVSYS, 11),
+    CLOCK_ENTRY(SERCOMx_SLOW),
+    CLOCK_ENTRY_(SERCOM0, CORE),
+    CLOCK_ENTRY_(SERCOM1, CORE),
+    CLOCK_ENTRY_(SERCOM2, CORE),
+    CLOCK_ENTRY_(SERCOM3, CORE),
+    CLOCK_ENTRY_(SERCOM4, CORE),
+    CLOCK_ENTRY_(SERCOM5, CORE),
+    CLOCK_ENTRY(TCC0_TCC1),
+    CLOCK_ENTRY(TCC2_TCC3),
+    CLOCK_ENTRY(TC4_TC5),
+    CLOCK_ENTRY(TC6_TC7),
+    CLOCK_ENTRY(ADC),
+    CLOCK_ENTRY_(AC, DIG),
+    CLOCK_ENTRY_(AC, ANA),
+    CLOCK_ENTRY(DAC),
+    CLOCK_ENTRY(PTC),
+    CLOCK_ENTRY_(I2S, 0),
+    CLOCK_ENTRY_(I2S, 1),
+
+    CLOCK_ENTRY(SYSTICK),
+#endif
+};
+MP_DEFINE_CONST_DICT(samd_clock_globals, samd_clock_global_dict_table);
+
+#endif // SAMD21
+
+#ifdef SAMD51
+
+
+
+#include <instance/can0.h>
+#include <instance/can1.h>
+#include <instance/i2s.h>
+#include <instance/sdhc1.h>
+#include <instance/sercom6.h>
+#include <instance/sercom7.h>
+#include <instance/tcc4.h>
+
+CLOCK_SOURCE(XOSC0);
+CLOCK_SOURCE(XOSC1);
+CLOCK_SOURCE(GCLKIN);
+CLOCK_SOURCE(GCLKGEN1);
+CLOCK_SOURCE(OSCULP32K);
+CLOCK_SOURCE(XOSC32K);
+CLOCK_SOURCE(DFLL);
+CLOCK_SOURCE(DPLL0);
+CLOCK_SOURCE(DPLL1);
+
+CLOCK_GCLK_(OSCCTRL, DFLL48);
+CLOCK_GCLK_(OSCCTRL, FDPLL0);
+CLOCK_GCLK_(OSCCTRL, FDPLL1);
+CLOCK_GCLK_(OSCCTRL, FDPLL032K); // GCLK_OSCCTRL_FDPLL1_32K, GCLK_SDHC0_SLOW, GCLK_SDHC1_SLOW, GCLK_SERCOM[0..7]_SLOW
+CLOCK_GCLK(EIC);
+CLOCK_GCLK_(FREQM, MSR);
+// 6: GCLK_FREQM_REF
+CLOCK_GCLK_(SERCOM0, CORE);
+CLOCK_GCLK_(SERCOM1, CORE);
+CLOCK(TC0_TC1, 1, 9);
+CLOCK_GCLK(USB);
+CLOCK_GCLK_(EVSYS, 0);
+CLOCK_GCLK_(EVSYS, 1);
+CLOCK_GCLK_(EVSYS, 2);
+CLOCK_GCLK_(EVSYS, 3);
+CLOCK_GCLK_(EVSYS, 4);
+CLOCK_GCLK_(EVSYS, 5);
+CLOCK_GCLK_(EVSYS, 6);
+CLOCK_GCLK_(EVSYS, 7);
+CLOCK_GCLK_(EVSYS, 8);
+CLOCK_GCLK_(EVSYS, 9);
+CLOCK_GCLK_(EVSYS, 10);
+CLOCK_GCLK_(EVSYS, 11);
+CLOCK_GCLK_(SERCOM2, CORE);
+CLOCK_GCLK_(SERCOM3, CORE);
+CLOCK(TCC0_TCC1, 1, 25);
+CLOCK(TC2_TC3, 1, 26);
+CLOCK_GCLK(CAN0);
+CLOCK_GCLK(CAN1);
+CLOCK(TCC2_TCC3, 1, 29);
+CLOCK(TC4_TC5, 1, 30);
+// CLOCK_GCLK(PDEC);
+// CLOCK_GCLK(AC);
+// CLOCK_GCLK(CCL);
+CLOCK_GCLK_(SERCOM4, CORE);
+CLOCK_GCLK_(SERCOM5, CORE);
+CLOCK_GCLK_(SERCOM6, CORE);
+CLOCK_GCLK_(SERCOM7, CORE);
+CLOCK_GCLK(TCC4);
+CLOCK(TC6_TC7, 1, 39);
+CLOCK_GCLK(ADC0);
+CLOCK_GCLK(ADC1);
+CLOCK_GCLK(DAC);
+CLOCK_GCLK_(I2S, 0);
+CLOCK_GCLK_(I2S, 1);
+// CLOCK_GCLK(SDHC0);
+// CLOCK_GCLK(SDHC1);
+// 47: GCLK_CM4_TRACE
+
+CLOCK(SYSTICK, 2, 0);
+CLOCK(CPU, 2, 1);
+CLOCK(RTC, 2, 2);
+
+
+STATIC const mp_rom_map_elem_t samd_clock_global_dict_table[] = {
+    CLOCK_ENTRY(XOSC0),
+    CLOCK_ENTRY(XOSC1),
+    CLOCK_ENTRY(GCLKIN),
+    CLOCK_ENTRY(GCLKGEN1),
+    CLOCK_ENTRY(OSCULP32K),
+    CLOCK_ENTRY(XOSC32K),
+    CLOCK_ENTRY(DFLL),
+    CLOCK_ENTRY(DPLL0),
+    CLOCK_ENTRY(DPLL1),
+
+    CLOCK_ENTRY_(OSCCTRL, DFLL48),
+    CLOCK_ENTRY_(OSCCTRL, FDPLL0),
+    CLOCK_ENTRY_(OSCCTRL, FDPLL1),
+    CLOCK_ENTRY_(OSCCTRL, FDPLL032K),
+    CLOCK_ENTRY(EIC),
+    CLOCK_ENTRY_(FREQM, MSR),
+    CLOCK_ENTRY_(SERCOM0, CORE),
+    CLOCK_ENTRY_(SERCOM1, CORE),
+    CLOCK_ENTRY(TC0_TC1),
+    CLOCK_ENTRY(USB),
+    CLOCK_ENTRY_(EVSYS, 0),
+    CLOCK_ENTRY_(EVSYS, 1),
+    CLOCK_ENTRY_(EVSYS, 2),
+    CLOCK_ENTRY_(EVSYS, 3),
+    CLOCK_ENTRY_(EVSYS, 4),
+    CLOCK_ENTRY_(EVSYS, 5),
+    CLOCK_ENTRY_(EVSYS, 6),
+    CLOCK_ENTRY_(EVSYS, 7),
+    CLOCK_ENTRY_(EVSYS, 8),
+    CLOCK_ENTRY_(EVSYS, 9),
+    CLOCK_ENTRY_(EVSYS, 10),
+    CLOCK_ENTRY_(EVSYS, 11),
+    CLOCK_ENTRY_(SERCOM2, CORE),
+    CLOCK_ENTRY_(SERCOM3, CORE),
+    CLOCK_ENTRY(TCC0_TCC1),
+    CLOCK_ENTRY(TC2_TC3),
+    CLOCK_ENTRY(CAN0),
+    CLOCK_ENTRY(CAN1),
+    CLOCK_ENTRY(TCC2_TCC3),
+    CLOCK_ENTRY(TC4_TC5),
+    // CLOCK_ENTRY(PDEC),
+    // CLOCK_ENTRY(AC),
+    // CLOCK_ENTRY(CCL),
+    CLOCK_ENTRY_(SERCOM4, CORE),
+    CLOCK_ENTRY_(SERCOM5, CORE),
+    CLOCK_ENTRY_(SERCOM6, CORE),
+    CLOCK_ENTRY_(SERCOM7, CORE),
+    CLOCK_ENTRY(TCC4),
+    CLOCK_ENTRY(TC6_TC7),
+    CLOCK_ENTRY(ADC0),
+    CLOCK_ENTRY(ADC1),
+    CLOCK_ENTRY(DAC),
+    CLOCK_ENTRY_(I2S, 0),
+    CLOCK_ENTRY_(I2S, 1),
+    // CLOCK_ENTRY(SDHC0),
+    // CLOCK_ENTRY(SDHC1),
+
+    CLOCK_ENTRY(SYSTICK),
+    CLOCK_ENTRY(CPU),
+    CLOCK_ENTRY(RTC),
+};
+MP_DEFINE_CONST_DICT(samd_clock_globals, samd_clock_global_dict_table);
+
+#endif // SAMD51

ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.h

@@ -7,10 +7,6 @@
 
 #define MICROPY_HW_LED_STATUS   (&pin_PB23)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA09)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA08)
 

ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x2341
 USB_PID = 0x8053
 USB_PRODUCT = "Arduino MKR1300"

ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.h

@@ -5,10 +5,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA09)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA08)
 

ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x239A
 USB_PID = 0x8050
 USB_PRODUCT = "Arduino MKRZero"

ports/atmel-samd/boards/arduino_zero/mpconfigboard.h

@@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (PORT_PB03)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
 

ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x2341
 USB_PID = 0x824D
 USB_PRODUCT = "Arduino Zero"

ports/atmel-samd/boards/bast_pro_mini_m0/mpconfigboard.h

@@ -5,6 +5,7 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
+// No microcontroller.nvm
 #define CIRCUITPY_INTERNAL_NVM_SIZE 0
 
 #define DEFAULT_I2C_BUS_SCL (&pin_PA08)
@@ -17,8 +18,6 @@
 #define DEFAULT_UART_BUS_RX (&pin_PA01)
 #define DEFAULT_UART_BUS_TX (&pin_PA00)
 
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000)
-
 #define IGNORE_PIN_PA03     1
 #define IGNORE_PIN_PA12     1
 #define IGNORE_PIN_PA13     1

ports/atmel-samd/boards/bast_pro_mini_m0/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB3
 USB_PRODUCT = "Bast Pro Mini M0"

ports/atmel-samd/boards/capablerobot_usbhub/board.c

@@ -30,13 +30,6 @@
 #include "common-hal/microcontroller/Pin.h"
 
 void board_init(void) {
-	// Don't reset:
-	// 	- USB Host Enable Pin
-	// 	- reset pin of the USB Hub
-	//
-	// If either are reset, USB devices will disconnect when the MCU restarts
-	never_reset_pin_number(PIN_PA07);
-	never_reset_pin_number(PIN_PB08);
 }
 
 bool board_requests_safe_mode(void) {

ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.h

@@ -3,7 +3,6 @@
 
 #define CIRCUITPY_MCU_FAMILY samd51
 
-
 #define MICROPY_HW_LED_STATUS   (&pin_PA22)
 
 // These are pins not to reset.
@@ -14,14 +13,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 
-#define AUTORESET_DELAY_MS 500
-
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code
-#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
-
-#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
 

ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x04D8
 USB_PID = 0xEDB3
 USB_PRODUCT = "Programmable USB Hub"
@@ -8,8 +7,8 @@ CHIP_VARIANT = SAMD51G19A
 CHIP_FAMILY = samd51
 
 QSPI_FLASH_FILESYSTEM = 1
-EXTERNAL_FLASH_DEVICE_COUNT = 1
+EXTERNAL_FLASH_DEVICE_COUNT = 2
-EXTERNAL_FLASH_DEVICES = GD25Q16C
+EXTERNAL_FLASH_DEVICES = "GD25Q16C, W25Q16JV_IQ"
 LONGINT_IMPL = MPZ
 
 # No I2S on SAMD51G

ports/atmel-samd/boards/capablerobot_usbhub/pins.c

@@ -17,8 +17,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
     { MP_OBJ_NEW_QSTR(MP_QSTR_RX),     MP_ROM_PTR(&pin_PA16) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_TX),     MP_ROM_PTR(&pin_PA17) },
 
-    { MP_OBJ_NEW_QSTR(MP_QSTR_USBHEN), MP_ROM_PTR(&pin_PA07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_USBHOSTEN),  MP_ROM_PTR(&pin_PA07) },
-    { MP_OBJ_NEW_QSTR(MP_QSTR_USBRST), MP_ROM_PTR(&pin_PB08) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_USBRESET),   MP_ROM_PTR(&pin_PB08) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_USBBCEN),    MP_ROM_PTR(&pin_PB22) },
 
     { MP_OBJ_NEW_QSTR(MP_QSTR_SDA),    MP_ROM_PTR(&pin_PA22) },
     { MP_OBJ_NEW_QSTR(MP_QSTR_SCL),    MP_ROM_PTR(&pin_PA23) },

ports/atmel-samd/boards/catwan_usbstick/mpconfigboard.h

@@ -7,14 +7,10 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
 #define DEFAULT_SPI_BUS_SCK (&pin_PA19)
 #define DEFAULT_SPI_BUS_MOSI (&pin_PA18)
 #define DEFAULT_SPI_BUS_MISO (&pin_PA22)
 
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define IGNORE_PIN_PA00     1
 #define IGNORE_PIN_PA01     1
 #define IGNORE_PIN_PA02     1

ports/atmel-samd/boards/catwan_usbstick/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB2
 USB_PRODUCT = "CatWAN USBStick"

ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h

@@ -22,17 +22,14 @@
 
 #define SPEAKER_ENABLE_PIN    (&pin_PA30)
 
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code.
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
 #define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up"
 
+// Increase stack size slightly due to CPX library import nesting
+#define CIRCUITPY_DEFAULT_STACK_SIZE  (4760) //divisible by 8
+
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB02)
 

ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8019
 USB_PRODUCT = "CircuitPlayground Express"

ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h

@@ -22,17 +22,14 @@
 
 #define SPEAKER_ENABLE_PIN    (&pin_PA30)
 
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code.
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
 #define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up"
 
+// Increase stack size slightly due to CPX library import nesting
+#define CIRCUITPY_DEFAULT_STACK_SIZE  (4760) // divisible by 8
+
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB02)
 

ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8019
 USB_PRODUCT = "CircuitPlayground Express with Crickit libraries"
@@ -14,9 +13,10 @@ EXTERNAL_FLASH_DEVICES = "S25FL216K, GD25Q16C"
 # Turn off features and optimizations for Crickit build to make room for additional frozen libs.
 LONGINT_IMPL = NONE
 CIRCUITPY_DISPLAYIO = 0
-CIRCUITPY_PIXELBUF = 0
 CIRCUITPY_FREQUENCYIO = 0
+CIRCUITPY_GAMEPAD = 0
 CIRCUITPY_I2CSLAVE = 0
+CIRCUITPY_PIXELBUF = 0
 
 SUPEROPT_GC = 0
 CFLAGS_INLINE_LIMIT = 55

ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h

@@ -22,17 +22,14 @@
 
 #define SPEAKER_ENABLE_PIN    (&pin_PA30)
 
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code.
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.
 #define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up"
 
+// Increase stack size slightly due to CPX library import nesting.
+#define CIRCUITPY_DEFAULT_STACK_SIZE  (4760)  // divisible by 8
+
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB02)
 
@@ -46,3 +43,5 @@
 // USB is always used internally so skip the pin objects for it.
 #define IGNORE_PIN_PA24     1
 #define IGNORE_PIN_PA25     1
+
+#define MICROPY_PY_URE 0

ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader-external-flash-crystalless.ld
 USB_VID = 0x239A
 USB_PID = 0x8019
 USB_PRODUCT = "CircuitPlayground Express with displayio"

ports/atmel-samd/boards/common.template.ld

@@ -1,13 +1,16 @@
-/*
+/* Template for SAMD21/SAMD51 linking. dollar-sign-curly-bracket items are replaced with strings. */
-    GNU linker script for SAMD21x18 (256K flash, 32K RAM)
-*/
 
 /* Specify the memory areas */
 MEMORY
 {
-    /* Leave 8KiB for the bootloader, 256b for persistent config (clock), 64k for the flash file system and 256b for the user config. */
+    FLASH_BOOTLOADER (rx): ORIGIN = ${BOOTLOADER_START_ADDR}, LENGTH = ${BOOTLOADER_SIZE}
-    FLASH (rx) : ORIGIN = 0x00000000 + 8K, LENGTH = 256K - 8K - 256 - 64K - 256
+
-    RAM (xrw)  : ORIGIN = 0x20000000, LENGTH = 32K
+    FLASH_FIRMWARE (rx) : ORIGIN = ${CIRCUITPY_FIRMWARE_START_ADDR}, LENGTH = ${CIRCUITPY_FIRMWARE_SIZE}
+    FLASH_FILESYSTEM (r) : ORIGIN = ${CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_START_ADDR}, LENGTH = ${CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE}
+    FLASH_CONFIG (r) : ORIGIN = ${CIRCUITPY_INTERNAL_CONFIG_START_ADDR}, LENGTH = ${CIRCUITPY_INTERNAL_CONFIG_SIZE}
+    FLASH_NVM (r) : ORIGIN = ${CIRCUITPY_INTERNAL_NVM_START_ADDR}, LENGTH = ${CIRCUITPY_INTERNAL_NVM_SIZE}
+
+    RAM (xrw)  : ORIGIN = 0x20000000, LENGTH = ${RAM_SIZE}
 }
 
 /* top end of the stack */
@@ -30,7 +33,7 @@ SECTIONS
         *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
 
         . = ALIGN(4);
-    } >FLASH
+    } >FLASH_FIRMWARE
 
     .ARM.exidx :
     {
@@ -38,12 +41,12 @@ SECTIONS
         *(.gnu.linkonce.armexidx.*)
         _etext = .;        /* define a global symbol at end of code */
         _sidata = .;       /* start of .data section */
-    } > FLASH
+    } >FLASH_FIRMWARE
 
     /* This is the initialized data section
     The program executes knowing that the data is in the RAM
-    but the loader puts the initial values in the FLASH (inidata).
+    but the loader puts the initial values in the FLASH_FIRMWARE (inidata).
-    It is one task of the startup to copy the initial values from FLASH to RAM. */
+    It is one task of the startup to copy the initial values from FLASH_FIRMWARE to RAM. */
     .data : AT ( _sidata )
     {
         . = ALIGN(4);
@@ -72,11 +75,11 @@ SECTIONS
         _ebss = .;
     } >RAM
 
-    /* this just checks there is enough RAM for a minimal stack */
+    /* this just checks there is enough RAM for the requested stack. */
     .stack :
     {
         . = ALIGN(4);
-        . = . + 2K; /* Reserve a minimum of 2K for the stack. */
+        . = . + ${CIRCUITPY_DEFAULT_STACK_SIZE};
         . = ALIGN(4);
     } >RAM
 

ports/atmel-samd/boards/cp32-m4/mpconfigboard.h

@@ -12,14 +12,6 @@
 #define MICROPY_PORT_C        (0)
 #define MICROPY_PORT_D        (0)
 
-#define AUTORESET_DELAY_MS 500
-
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code
-#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
-
-#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PB09)
 #define DEFAULT_I2C_BUS_SDA (&pin_PB08)
 

ports/atmel-samd/boards/cp32-m4/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd51x20-bootloader-external-flash.ld
 USB_VID = 0x239A
 USB_PID = 0x8021
 USB_PRODUCT = "CP32-M4"
@@ -11,6 +10,5 @@ QSPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICE_COUNT = 1
 EXTERNAL_FLASH_DEVICES = "W25Q128JV_PM"
 
-CIRCUITPY_PS2IO = 1
 # No I2S on SAMD51G.
 CIRCUITPY_AUDIOBUSIO = 0

ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.h

@@ -20,14 +20,6 @@
 #define MICROPY_PORT_C (0)
 #define MICROPY_PORT_D (0)
 
-#define AUTORESET_DELAY_MS 500
-
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code
-#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
-
-#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define BOARD_HAS_CRYSTAL 1
 
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)

ports/atmel-samd/boards/datalore_ip_m4/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd51x19-bootloader-external-flash.ld
 USB_VID = 0x4097
 USB_PID = 0x0001
 USB_PRODUCT = "Datalore IP M4"
@@ -11,7 +10,3 @@ QSPI_FLASH_FILESYSTEM = 1
 EXTERNAL_FLASH_DEVICE_COUNT = 3
 EXTERNAL_FLASH_DEVICES = "GD25Q16C, W25Q16JV_IQ, W25Q16JV_IM"
 LONGINT_IMPL = MPZ
-
-CIRCUITPY_NETWORK = 1
-MICROPY_PY_WIZNET5K = 5500
-CIRCUITPY_PS2IO = 1

ports/atmel-samd/boards/datum_distance/mpconfigboard.h

@@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
 

ports/atmel-samd/boards/datum_distance/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8C
 USB_PRODUCT = "datum-Distance"

ports/atmel-samd/boards/datum_imu/mpconfigboard.h

@@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
 

ports/atmel-samd/boards/datum_imu/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8D
 USB_PRODUCT = "datum-IMU"

ports/atmel-samd/boards/datum_light/mpconfigboard.h

@@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
 

ports/atmel-samd/boards/datum_light/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8E
 USB_PRODUCT = "datum-Light"

ports/atmel-samd/boards/datum_weather/mpconfigboard.h

@@ -10,10 +10,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define DEFAULT_I2C_BUS_SCL (&pin_PA23)
 #define DEFAULT_I2C_BUS_SDA (&pin_PA22)
 

ports/atmel-samd/boards/datum_weather/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x04D8
 USB_PID = 0xEE8F
 USB_PRODUCT = "datum-Weather"

ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h

@@ -8,12 +8,6 @@
 #define MICROPY_PORT_B        (0)
 #define MICROPY_PORT_C        (0)
 
-// If you change this, then make sure to update the linker scripts as well to
-// make sure you don't overwrite code.
-#define CIRCUITPY_INTERNAL_NVM_SIZE 256
-
-#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
-
 #define CALIBRATE_CRYSTALLESS 1
 
 // Explanation of how a user got into safe mode.

ports/atmel-samd/boards/escornabot_makech/mpconfigboard.mk

@@ -1,4 +1,3 @@
-LD_FILE = boards/samd21x18-bootloader.ld
 USB_VID = 0x1209
 USB_PID = 0xBAB6
 USB_PRODUCT = "Escornabot Makech"