Merge branch 'master' into stm32-f405-support
This commit is contained in:
Hierophect
commit
fd1a257df3
@ -143,7 +143,6 @@ CFLAGS += -DHSE_VALUE=8000000 -DCFG_TUSB_MCU=OPT_MCU_STM32F4 -DCFG_TUD_CDC_RX_BU
|
|||||||
######################################
|
######################################
|
||||||
|
|
||||||
SRC_STM32 = \
|
SRC_STM32 = \
|
||||||
boards/$(BOARD)/stm32f4xx_hal_msp.c \
|
|
||||||
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c \
|
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c \
|
||||||
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c \
|
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c \
|
||||||
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c \
|
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c \
|
||||||
@ -192,6 +191,7 @@ SRC_C += \
|
|||||||
peripherals/stm32f4/$(MCU_SUB_VARIANT)/pins.c \
|
peripherals/stm32f4/$(MCU_SUB_VARIANT)/pins.c \
|
||||||
peripherals/stm32f4/$(MCU_SUB_VARIANT)/clocks.c \
|
peripherals/stm32f4/$(MCU_SUB_VARIANT)/clocks.c \
|
||||||
peripherals/stm32f4/$(MCU_SUB_VARIANT)/gpio.c \
|
peripherals/stm32f4/$(MCU_SUB_VARIANT)/gpio.c \
|
||||||
|
peripherals/stm32f4/$(MCU_SUB_VARIANT)/periph.c \
|
||||||
lib/libc/string0.c \
|
lib/libc/string0.c \
|
||||||
lib/mp-readline/readline.c \
|
lib/mp-readline/readline.c \
|
||||||
lib/oofatfs/ff.c \
|
lib/oofatfs/ff.c \
|
||||||
|
|||||||
@ -1,427 +0,0 @@
|
|||||||
/* USER CODE BEGIN Header */
|
|
||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* File Name : stm32f4xx_hal_msp.c
|
|
||||||
* Description : This file provides code for the MSP Initialization
|
|
||||||
* and de-Initialization codes.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under Ultimate Liberty license
|
|
||||||
* SLA0044, the "License"; You may not use this file except in compliance with
|
|
||||||
* the License. You may obtain a copy of the License at:
|
|
||||||
* www.st.com/SLA0044
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
/* USER CODE END Header */
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Includes */
|
|
||||||
#include "stm32f4xx_hal.h"
|
|
||||||
/* USER CODE END Includes */
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN TD */
|
|
||||||
|
|
||||||
/* USER CODE END TD */
|
|
||||||
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Define */
|
|
||||||
#define DATA_Ready_Pin GPIO_PIN_2
|
|
||||||
#define DATA_Ready_GPIO_Port GPIOE
|
|
||||||
#define CS_I2C_SPI_Pin GPIO_PIN_3
|
|
||||||
#define CS_I2C_SPI_GPIO_Port GPIOE
|
|
||||||
#define INT1_Pin GPIO_PIN_4
|
|
||||||
#define INT1_GPIO_Port GPIOE
|
|
||||||
#define INT2_Pin GPIO_PIN_5
|
|
||||||
#define INT2_GPIO_Port GPIOE
|
|
||||||
#define PC14_OSC32_IN_Pin GPIO_PIN_14
|
|
||||||
#define PC14_OSC32_IN_GPIO_Port GPIOC
|
|
||||||
#define PC15_OSC32_OUT_Pin GPIO_PIN_15
|
|
||||||
#define PC15_OSC32_OUT_GPIO_Port GPIOC
|
|
||||||
#define PH0_OSC_IN_Pin GPIO_PIN_0
|
|
||||||
#define PH0_OSC_IN_GPIO_Port GPIOH
|
|
||||||
#define PH1_OSC_OUT_Pin GPIO_PIN_1
|
|
||||||
#define PH1_OSC_OUT_GPIO_Port GPIOH
|
|
||||||
#define OTG_FS_PowerSwitchOn_Pin GPIO_PIN_0
|
|
||||||
#define OTG_FS_PowerSwitchOn_GPIO_Port GPIOC
|
|
||||||
#define PDM_OUT_Pin GPIO_PIN_3
|
|
||||||
#define PDM_OUT_GPIO_Port GPIOC
|
|
||||||
#define I2S3_WS_Pin GPIO_PIN_4
|
|
||||||
#define I2S3_WS_GPIO_Port GPIOA
|
|
||||||
#define SPI1_SCK_Pin GPIO_PIN_5
|
|
||||||
#define SPI1_SCK_GPIO_Port GPIOA
|
|
||||||
#define SPI1_MISO_Pin GPIO_PIN_6
|
|
||||||
#define SPI1_MISO_GPIO_Port GPIOA
|
|
||||||
#define SPI1_MOSI_Pin GPIO_PIN_7
|
|
||||||
#define SPI1_MOSI_GPIO_Port GPIOA
|
|
||||||
#define CLK_IN_Pin GPIO_PIN_10
|
|
||||||
#define CLK_IN_GPIO_Port GPIOB
|
|
||||||
#define LD4_Pin GPIO_PIN_12
|
|
||||||
#define LD4_GPIO_Port GPIOD
|
|
||||||
#define LD3_Pin GPIO_PIN_13
|
|
||||||
#define LD3_GPIO_Port GPIOD
|
|
||||||
#define LD5_Pin GPIO_PIN_14
|
|
||||||
#define LD5_GPIO_Port GPIOD
|
|
||||||
#define LD6_Pin GPIO_PIN_15
|
|
||||||
#define LD6_GPIO_Port GPIOD
|
|
||||||
#define I2S3_MCK_Pin GPIO_PIN_7
|
|
||||||
#define I2S3_MCK_GPIO_Port GPIOC
|
|
||||||
#define VBUS_FS_Pin GPIO_PIN_9
|
|
||||||
#define VBUS_FS_GPIO_Port GPIOA
|
|
||||||
#define OTG_FS_ID_Pin GPIO_PIN_10
|
|
||||||
#define OTG_FS_ID_GPIO_Port GPIOA
|
|
||||||
#define OTG_FS_DM_Pin GPIO_PIN_11
|
|
||||||
#define OTG_FS_DM_GPIO_Port GPIOA
|
|
||||||
#define OTG_FS_DP_Pin GPIO_PIN_12
|
|
||||||
#define OTG_FS_DP_GPIO_Port GPIOA
|
|
||||||
#define SWDIO_Pin GPIO_PIN_13
|
|
||||||
#define SWDIO_GPIO_Port GPIOA
|
|
||||||
#define SWCLK_Pin GPIO_PIN_14
|
|
||||||
#define SWCLK_GPIO_Port GPIOA
|
|
||||||
#define I2S3_SCK_Pin GPIO_PIN_10
|
|
||||||
#define I2S3_SCK_GPIO_Port GPIOC
|
|
||||||
#define I2S3_SD_Pin GPIO_PIN_12
|
|
||||||
#define I2S3_SD_GPIO_Port GPIOC
|
|
||||||
#define Audio_RST_Pin GPIO_PIN_4
|
|
||||||
#define Audio_RST_GPIO_Port GPIOD
|
|
||||||
#define OTG_FS_OverCurrent_Pin GPIO_PIN_5
|
|
||||||
#define OTG_FS_OverCurrent_GPIO_Port GPIOD
|
|
||||||
#define SWO_Pin GPIO_PIN_3
|
|
||||||
#define SWO_GPIO_Port GPIOB
|
|
||||||
#define Audio_SCL_Pin GPIO_PIN_6
|
|
||||||
#define Audio_SCL_GPIO_Port GPIOB
|
|
||||||
#define Audio_SDA_Pin GPIO_PIN_9
|
|
||||||
#define Audio_SDA_GPIO_Port GPIOB
|
|
||||||
#define MEMS_INT2_Pin GPIO_PIN_1
|
|
||||||
#define MEMS_INT2_GPIO_Port GPIOE
|
|
||||||
|
|
||||||
/* USER CODE END Define */
|
|
||||||
|
|
||||||
/* Private macro -------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Macro */
|
|
||||||
|
|
||||||
/* USER CODE END Macro */
|
|
||||||
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN PV */
|
|
||||||
|
|
||||||
/* USER CODE END PV */
|
|
||||||
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN PFP */
|
|
||||||
|
|
||||||
/* USER CODE END PFP */
|
|
||||||
|
|
||||||
/* External functions --------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN ExternalFunctions */
|
|
||||||
|
|
||||||
/* USER CODE END ExternalFunctions */
|
|
||||||
|
|
||||||
/* USER CODE BEGIN 0 */
|
|
||||||
|
|
||||||
/* USER CODE END 0 */
|
|
||||||
/**
|
|
||||||
* Initializes the Global MSP.
|
|
||||||
*/
|
|
||||||
void HAL_MspInit(void)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END MspInit 0 */
|
|
||||||
|
|
||||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
||||||
__HAL_RCC_PWR_CLK_ENABLE();
|
|
||||||
|
|
||||||
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0);
|
|
||||||
|
|
||||||
/* System interrupt init*/
|
|
||||||
|
|
||||||
/* USER CODE BEGIN MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2C MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hi2c: I2C handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hi2c->Instance==I2C1)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN I2C1_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspInit 0 */
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
||||||
/**I2C1 GPIO Configuration
|
|
||||||
PB6 ------> I2C1_SCL
|
|
||||||
PB9 ------> I2C1_SDA
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = Audio_SCL_Pin|GPIO_PIN_7;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
|
|
||||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_I2C1_CLK_ENABLE();
|
|
||||||
/* USER CODE BEGIN I2C1_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2C MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hi2c: I2C handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
|
||||||
{
|
|
||||||
if(hi2c->Instance==I2C1)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN I2C1_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_I2C1_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**I2C1 GPIO Configuration
|
|
||||||
PB6 ------> I2C1_SCL
|
|
||||||
PB9 ------> I2C1_SDA
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOB, Audio_SCL_Pin|Audio_SDA_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN I2C1_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2S MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hi2s: I2S handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hi2s->Instance==SPI2)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI2_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI2_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_SPI2_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
||||||
/**I2S2 GPIO Configuration
|
|
||||||
PC2 ------> I2S2_ext_SD
|
|
||||||
PC3 ------> I2S2_SD
|
|
||||||
PB10 ------> I2S2_CK
|
|
||||||
PB12 ------> I2S2_WS
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF6_I2S2ext;
|
|
||||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = PDM_OUT_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
||||||
HAL_GPIO_Init(PDM_OUT_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = CLK_IN_Pin|GPIO_PIN_12;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
||||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI2_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI2_MspInit 1 */
|
|
||||||
}
|
|
||||||
else if(hi2s->Instance==SPI3)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI3_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_SPI3_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
||||||
/**I2S3 GPIO Configuration
|
|
||||||
PA4 ------> I2S3_WS
|
|
||||||
PC7 ------> I2S3_MCK
|
|
||||||
PC10 ------> I2S3_CK
|
|
||||||
PC12 ------> I2S3_SD
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = I2S3_WS_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
|
||||||
HAL_GPIO_Init(I2S3_WS_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = I2S3_MCK_Pin|I2S3_SCK_Pin|I2S3_SD_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
|
||||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI3_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2S MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hi2s: I2S handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
|
|
||||||
{
|
|
||||||
if(hi2s->Instance==SPI2)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI2_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_SPI2_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**I2S2 GPIO Configuration
|
|
||||||
PC2 ------> I2S2_ext_SD
|
|
||||||
PC3 ------> I2S2_SD
|
|
||||||
PB10 ------> I2S2_CK
|
|
||||||
PB12 ------> I2S2_WS
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|PDM_OUT_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(GPIOB, CLK_IN_Pin|GPIO_PIN_12);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI2_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
else if(hi2s->Instance==SPI3)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI3_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_SPI3_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**I2S3 GPIO Configuration
|
|
||||||
PA4 ------> I2S3_WS
|
|
||||||
PC7 ------> I2S3_MCK
|
|
||||||
PC10 ------> I2S3_CK
|
|
||||||
PC12 ------> I2S3_SD
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(I2S3_WS_GPIO_Port, I2S3_WS_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(GPIOC, I2S3_MCK_Pin|I2S3_SCK_Pin|I2S3_SD_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief SPI MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hspi: SPI handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hspi->Instance==SPI1)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI1_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI1_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_SPI1_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
||||||
/**SPI1 GPIO Configuration
|
|
||||||
PA5 ------> SPI1_SCK
|
|
||||||
PA6 ------> SPI1_MISO
|
|
||||||
PA7 ------> SPI1_MOSI
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
||||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI1_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI1_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief SPI MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hspi: SPI handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
|
||||||
{
|
|
||||||
if(hspi->Instance==SPI1)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI1_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_SPI1_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**SPI1 GPIO Configuration
|
|
||||||
PA5 ------> SPI1_SCK
|
|
||||||
PA6 ------> SPI1_MISO
|
|
||||||
PA7 ------> SPI1_MOSI
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOA, SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI1_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/* USER CODE BEGIN 1 */
|
|
||||||
|
|
||||||
/* USER CODE END 1 */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -82,6 +82,8 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
|||||||
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PC04) },
|
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PC04) },
|
||||||
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PC05) }, //alt PB09, see F401ZG-DISCO manual
|
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PC05) }, //alt PB09, see F401ZG-DISCO manual
|
||||||
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) }, //alt PB10, see F401ZG-DISCO manual
|
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB00) }, //alt PB10, see F401ZG-DISCO manual
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB10) },
|
||||||
|
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB09) },
|
||||||
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PE00) },
|
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PE00) },
|
||||||
{ MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PE01) },
|
{ MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PE01) },
|
||||||
{ MP_ROM_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PE02) },
|
{ MP_ROM_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PE02) },
|
||||||
|
|||||||
@ -1,832 +0,0 @@
|
|||||||
/* USER CODE BEGIN Header */
|
|
||||||
/**
|
|
||||||
******************************************************************************
|
|
||||||
* File Name : stm32f4xx_hal_msp.c
|
|
||||||
* Description : This file provides code for the MSP Initialization
|
|
||||||
* and de-Initialization codes.
|
|
||||||
******************************************************************************
|
|
||||||
* @attention
|
|
||||||
*
|
|
||||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
|
||||||
* All rights reserved.</center></h2>
|
|
||||||
*
|
|
||||||
* This software component is licensed by ST under Ultimate Liberty license
|
|
||||||
* SLA0044, the "License"; You may not use this file except in compliance with
|
|
||||||
* the License. You may obtain a copy of the License at:
|
|
||||||
* www.st.com/SLA0044
|
|
||||||
*
|
|
||||||
******************************************************************************
|
|
||||||
*/
|
|
||||||
/* USER CODE END Header */
|
|
||||||
|
|
||||||
/* Includes ------------------------------------------------------------------*/
|
|
||||||
#include "stm32f4xx_hal.h"
|
|
||||||
/* USER CODE BEGIN Includes */
|
|
||||||
|
|
||||||
/* USER CODE END Includes */
|
|
||||||
|
|
||||||
/* Private typedef -----------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN TD */
|
|
||||||
|
|
||||||
/* USER CODE END TD */
|
|
||||||
|
|
||||||
/* Private define ------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Define */
|
|
||||||
#define LED3_Pin GPIO_PIN_2
|
|
||||||
#define LED3_GPIO_Port GPIOE
|
|
||||||
#define LED4_Pin GPIO_PIN_3
|
|
||||||
#define LED4_GPIO_Port GPIOE
|
|
||||||
#define DFSDM_DATIN3_Pin GPIO_PIN_4
|
|
||||||
#define DFSDM_DATIN3_GPIO_Port GPIOE
|
|
||||||
#define A0_Pin GPIO_PIN_0
|
|
||||||
#define A0_GPIO_Port GPIOF
|
|
||||||
#define LCD_BLCTRL_Pin GPIO_PIN_5
|
|
||||||
#define LCD_BLCTRL_GPIO_Port GPIOF
|
|
||||||
#define QSPI_BK1_IO3_Pin GPIO_PIN_6
|
|
||||||
#define QSPI_BK1_IO3_GPIO_Port GPIOF
|
|
||||||
#define QSPI_BK1_IO2_Pin GPIO_PIN_7
|
|
||||||
#define QSPI_BK1_IO2_GPIO_Port GPIOF
|
|
||||||
#define QSPI_BK1_IO0_Pin GPIO_PIN_8
|
|
||||||
#define QSPI_BK1_IO0_GPIO_Port GPIOF
|
|
||||||
#define QSPI_BK1_IO1_Pin GPIO_PIN_9
|
|
||||||
#define QSPI_BK1_IO1_GPIO_Port GPIOF
|
|
||||||
#define STLK_MCO_Pin GPIO_PIN_0
|
|
||||||
#define STLK_MCO_GPIO_Port GPIOH
|
|
||||||
#define DFSDM_CKOUT_Pin GPIO_PIN_2
|
|
||||||
#define DFSDM_CKOUT_GPIO_Port GPIOC
|
|
||||||
#define JOY_SEL_Pin GPIO_PIN_0
|
|
||||||
#define JOY_SEL_GPIO_Port GPIOA
|
|
||||||
#define STLINK_RX_Pin GPIO_PIN_2
|
|
||||||
#define STLINK_RX_GPIO_Port GPIOA
|
|
||||||
#define STLINK_TX_Pin GPIO_PIN_3
|
|
||||||
#define STLINK_TX_GPIO_Port GPIOA
|
|
||||||
#define CODEC_I2S3_WS_Pin GPIO_PIN_4
|
|
||||||
#define CODEC_I2S3_WS_GPIO_Port GPIOA
|
|
||||||
#define DFSDM_DATIN0_Pin GPIO_PIN_1
|
|
||||||
#define DFSDM_DATIN0_GPIO_Port GPIOB
|
|
||||||
#define QSPI_CLK_Pin GPIO_PIN_2
|
|
||||||
#define QSPI_CLK_GPIO_Port GPIOB
|
|
||||||
#define EXT_RESET_Pin GPIO_PIN_11
|
|
||||||
#define EXT_RESET_GPIO_Port GPIOF
|
|
||||||
#define CTP_RST_Pin GPIO_PIN_12
|
|
||||||
#define CTP_RST_GPIO_Port GPIOF
|
|
||||||
#define JOY_RIGHT_Pin GPIO_PIN_14
|
|
||||||
#define JOY_RIGHT_GPIO_Port GPIOF
|
|
||||||
#define JOY_LEFT_Pin GPIO_PIN_15
|
|
||||||
#define JOY_LEFT_GPIO_Port GPIOF
|
|
||||||
#define JOY_UP_Pin GPIO_PIN_0
|
|
||||||
#define JOY_UP_GPIO_Port GPIOG
|
|
||||||
#define JOY_DOWN_Pin GPIO_PIN_1
|
|
||||||
#define JOY_DOWN_GPIO_Port GPIOG
|
|
||||||
#define D4_Pin GPIO_PIN_7
|
|
||||||
#define D4_GPIO_Port GPIOE
|
|
||||||
#define D5_Pin GPIO_PIN_8
|
|
||||||
#define D5_GPIO_Port GPIOE
|
|
||||||
#define D6_Pin GPIO_PIN_9
|
|
||||||
#define D6_GPIO_Port GPIOE
|
|
||||||
#define D7_Pin GPIO_PIN_10
|
|
||||||
#define D7_GPIO_Port GPIOE
|
|
||||||
#define D8_Pin GPIO_PIN_11
|
|
||||||
#define D8_GPIO_Port GPIOE
|
|
||||||
#define D9_Pin GPIO_PIN_12
|
|
||||||
#define D9_GPIO_Port GPIOE
|
|
||||||
#define D10_Pin GPIO_PIN_13
|
|
||||||
#define D10_GPIO_Port GPIOE
|
|
||||||
#define D11_Pin GPIO_PIN_14
|
|
||||||
#define D11_GPIO_Port GPIOE
|
|
||||||
#define D12_Pin GPIO_PIN_15
|
|
||||||
#define D12_GPIO_Port GPIOE
|
|
||||||
#define I2C2_SCL_Pin GPIO_PIN_10
|
|
||||||
#define I2C2_SCL_GPIO_Port GPIOB
|
|
||||||
#define M2_CKIN_Pin GPIO_PIN_11
|
|
||||||
#define M2_CKIN_GPIO_Port GPIOB
|
|
||||||
#define CODEC_I2S3_SCK_Pin GPIO_PIN_12
|
|
||||||
#define CODEC_I2S3_SCK_GPIO_Port GPIOB
|
|
||||||
#define D13_Pin GPIO_PIN_8
|
|
||||||
#define D13_GPIO_Port GPIOD
|
|
||||||
#define D14_Pin GPIO_PIN_9
|
|
||||||
#define D14_GPIO_Port GPIOD
|
|
||||||
#define D15_Pin GPIO_PIN_10
|
|
||||||
#define D15_GPIO_Port GPIOD
|
|
||||||
#define LCD_RESET_Pin GPIO_PIN_11
|
|
||||||
#define LCD_RESET_GPIO_Port GPIOD
|
|
||||||
#define D0_Pin GPIO_PIN_14
|
|
||||||
#define D0_GPIO_Port GPIOD
|
|
||||||
#define D1_Pin GPIO_PIN_15
|
|
||||||
#define D1_GPIO_Port GPIOD
|
|
||||||
#define CODEC_INT_Pin GPIO_PIN_2
|
|
||||||
#define CODEC_INT_GPIO_Port GPIOG
|
|
||||||
#define LCD_TE_Pin GPIO_PIN_4
|
|
||||||
#define LCD_TE_GPIO_Port GPIOG
|
|
||||||
#define CTP_INT_Pin GPIO_PIN_5
|
|
||||||
#define CTP_INT_GPIO_Port GPIOG
|
|
||||||
#define QSPI_BK1_NCS_Pin GPIO_PIN_6
|
|
||||||
#define QSPI_BK1_NCS_GPIO_Port GPIOG
|
|
||||||
#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7
|
|
||||||
#define USB_OTGFS_OVRCR_GPIO_Port GPIOG
|
|
||||||
#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8
|
|
||||||
#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG
|
|
||||||
#define CODEC_I2S3_MCK_Pin GPIO_PIN_7
|
|
||||||
#define CODEC_I2S3_MCK_GPIO_Port GPIOC
|
|
||||||
#define uSD_D0_Pin GPIO_PIN_8
|
|
||||||
#define uSD_D0_GPIO_Port GPIOC
|
|
||||||
#define uSD_D1_Pin GPIO_PIN_9
|
|
||||||
#define uSD_D1_GPIO_Port GPIOC
|
|
||||||
#define M2_CKINA8_Pin GPIO_PIN_8
|
|
||||||
#define M2_CKINA8_GPIO_Port GPIOA
|
|
||||||
#define USB_OTGFS_VBUS_Pin GPIO_PIN_9
|
|
||||||
#define USB_OTGFS_VBUS_GPIO_Port GPIOA
|
|
||||||
#define USB_OTGFS_ID_Pin GPIO_PIN_10
|
|
||||||
#define USB_OTGFS_ID_GPIO_Port GPIOA
|
|
||||||
#define USB_OTGFS_DM_Pin GPIO_PIN_11
|
|
||||||
#define USB_OTGFS_DM_GPIO_Port GPIOA
|
|
||||||
#define USB_OTGFS_DP_Pin GPIO_PIN_12
|
|
||||||
#define USB_OTGFS_DP_GPIO_Port GPIOA
|
|
||||||
#define SWDIO_Pin GPIO_PIN_13
|
|
||||||
#define SWDIO_GPIO_Port GPIOA
|
|
||||||
#define SWCLK_Pin GPIO_PIN_14
|
|
||||||
#define SWCLK_GPIO_Port GPIOA
|
|
||||||
#define uSD_D2_Pin GPIO_PIN_10
|
|
||||||
#define uSD_D2_GPIO_Port GPIOC
|
|
||||||
#define uSD_D3_Pin GPIO_PIN_11
|
|
||||||
#define uSD_D3_GPIO_Port GPIOC
|
|
||||||
#define uSD_CLK_Pin GPIO_PIN_12
|
|
||||||
#define uSD_CLK_GPIO_Port GPIOC
|
|
||||||
#define D2_Pin GPIO_PIN_0
|
|
||||||
#define D2_GPIO_Port GPIOD
|
|
||||||
#define D3_Pin GPIO_PIN_1
|
|
||||||
#define D3_GPIO_Port GPIOD
|
|
||||||
#define uSD_CMD_Pin GPIO_PIN_2
|
|
||||||
#define uSD_CMD_GPIO_Port GPIOD
|
|
||||||
#define uSD_DETECT_Pin GPIO_PIN_3
|
|
||||||
#define uSD_DETECT_GPIO_Port GPIOD
|
|
||||||
#define FMC_NOE_Pin GPIO_PIN_4
|
|
||||||
#define FMC_NOE_GPIO_Port GPIOD
|
|
||||||
#define FMC_NWE_Pin GPIO_PIN_5
|
|
||||||
#define FMC_NWE_GPIO_Port GPIOD
|
|
||||||
#define FMC_NE1_Pin GPIO_PIN_7
|
|
||||||
#define FMC_NE1_GPIO_Port GPIOD
|
|
||||||
#define SWO_Pin GPIO_PIN_3
|
|
||||||
#define SWO_GPIO_Port GPIOB
|
|
||||||
#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4
|
|
||||||
#define CODEC_I2S3ext_SD_GPIO_Port GPIOB
|
|
||||||
#define CODEC_I2S3_SD_Pin GPIO_PIN_5
|
|
||||||
#define CODEC_I2S3_SD_GPIO_Port GPIOB
|
|
||||||
#define I2C1_SCL_Pin GPIO_PIN_6
|
|
||||||
#define I2C1_SCL_GPIO_Port GPIOB
|
|
||||||
#define I2C1_SDA_Pin GPIO_PIN_7
|
|
||||||
#define I2C1_SDA_GPIO_Port GPIOB
|
|
||||||
#define I2C2_SDA_Pin GPIO_PIN_9
|
|
||||||
#define I2C2_SDA_GPIO_Port GPIOB
|
|
||||||
#define LED1_Pin GPIO_PIN_0
|
|
||||||
#define LED1_GPIO_Port GPIOE
|
|
||||||
#define LED2_Pin GPIO_PIN_1
|
|
||||||
#define LED2_GPIO_Port GPIOE
|
|
||||||
|
|
||||||
/* USER CODE END Define */
|
|
||||||
|
|
||||||
/* Private macro -------------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN Macro */
|
|
||||||
|
|
||||||
/* USER CODE END Macro */
|
|
||||||
|
|
||||||
/* Private variables ---------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN PV */
|
|
||||||
|
|
||||||
/* USER CODE END PV */
|
|
||||||
|
|
||||||
/* Private function prototypes -----------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN PFP */
|
|
||||||
|
|
||||||
/* USER CODE END PFP */
|
|
||||||
|
|
||||||
/* External functions --------------------------------------------------------*/
|
|
||||||
/* USER CODE BEGIN ExternalFunctions */
|
|
||||||
|
|
||||||
/* USER CODE END ExternalFunctions */
|
|
||||||
|
|
||||||
/* USER CODE BEGIN 0 */
|
|
||||||
|
|
||||||
/* USER CODE END 0 */
|
|
||||||
/**
|
|
||||||
* Initializes the Global MSP.
|
|
||||||
*/
|
|
||||||
void HAL_MspInit(void)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END MspInit 0 */
|
|
||||||
|
|
||||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
||||||
__HAL_RCC_PWR_CLK_ENABLE();
|
|
||||||
|
|
||||||
/* System interrupt init*/
|
|
||||||
|
|
||||||
/* USER CODE BEGIN MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2C MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hi2c: I2C handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hi2c->Instance==I2C1)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN I2C1_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspInit 0 */
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
||||||
/**I2C1 GPIO Configuration
|
|
||||||
PB6 ------> I2C1_SCL
|
|
||||||
PB7 ------> I2C1_SDA
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = I2C1_SCL_Pin|I2C1_SDA_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
|
|
||||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_I2C1_CLK_ENABLE();
|
|
||||||
/* USER CODE BEGIN I2C1_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspInit 1 */
|
|
||||||
}
|
|
||||||
else if(hi2c->Instance==I2C2)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN I2C2_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C2_MspInit 0 */
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
||||||
/**I2C2 GPIO Configuration
|
|
||||||
PB10 ------> I2C2_SCL
|
|
||||||
PB9 ------> I2C2_SDA
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = I2C2_SCL_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;//GPIO_PULLUP;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
|
|
||||||
HAL_GPIO_Init(I2C2_SCL_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = I2C2_SDA_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;//GPIO_PULLUP;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF9_I2C2;
|
|
||||||
HAL_GPIO_Init(I2C2_SDA_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_I2C2_CLK_ENABLE();
|
|
||||||
/* USER CODE BEGIN I2C2_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C2_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2C MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hi2c: I2C handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
|
||||||
{
|
|
||||||
if(hi2c->Instance==I2C1)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN I2C1_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_I2C1_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**I2C1 GPIO Configuration
|
|
||||||
PB6 ------> I2C1_SCL
|
|
||||||
PB7 ------> I2C1_SDA
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOB, I2C1_SCL_Pin|I2C1_SDA_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN I2C1_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C1_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
else if(hi2c->Instance==I2C2)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN I2C2_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C2_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_I2C2_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**I2C2 GPIO Configuration
|
|
||||||
PB10 ------> I2C2_SCL
|
|
||||||
PB9 ------> I2C2_SDA
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOB, I2C2_SCL_Pin|I2C2_SDA_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN I2C2_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END I2C2_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2S MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hi2s: I2S handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hi2s->Instance==SPI3)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI3_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_SPI3_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
||||||
/**I2S3 GPIO Configuration
|
|
||||||
PA4 ------> I2S3_WS
|
|
||||||
PB12 ------> I2S3_CK
|
|
||||||
PC7 ------> I2S3_MCK
|
|
||||||
PB4 ------> I2S3_ext_SD
|
|
||||||
PB5 ------> I2S3_SD
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = CODEC_I2S3_WS_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
|
||||||
HAL_GPIO_Init(CODEC_I2S3_WS_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = CODEC_I2S3_SCK_Pin|CODEC_I2S3ext_SD_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF7_SPI3;
|
|
||||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = CODEC_I2S3_MCK_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
|
||||||
HAL_GPIO_Init(CODEC_I2S3_MCK_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = CODEC_I2S3_SD_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
|
||||||
HAL_GPIO_Init(CODEC_I2S3_SD_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI3_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief I2S MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hi2s: I2S handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
|
|
||||||
{
|
|
||||||
if(hi2s->Instance==SPI3)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SPI3_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_SPI3_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**I2S3 GPIO Configuration
|
|
||||||
PA4 ------> I2S3_WS
|
|
||||||
PB12 ------> I2S3_CK
|
|
||||||
PC7 ------> I2S3_MCK
|
|
||||||
PB4 ------> I2S3_ext_SD
|
|
||||||
PB5 ------> I2S3_SD
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(CODEC_I2S3_WS_GPIO_Port, CODEC_I2S3_WS_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(GPIOB, CODEC_I2S3_SCK_Pin|CODEC_I2S3ext_SD_Pin|CODEC_I2S3_SD_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(CODEC_I2S3_MCK_GPIO_Port, CODEC_I2S3_MCK_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SPI3_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief QSPI MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hqspi: QSPI handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hqspi->Instance==QUADSPI)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN QUADSPI_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_QSPI_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
|
||||||
/**QUADSPI GPIO Configuration
|
|
||||||
PF6 ------> QUADSPI_BK1_IO3
|
|
||||||
PF7 ------> QUADSPI_BK1_IO2
|
|
||||||
PF8 ------> QUADSPI_BK1_IO0
|
|
||||||
PF9 ------> QUADSPI_BK1_IO1
|
|
||||||
PB2 ------> QUADSPI_CLK
|
|
||||||
PG6 ------> QUADSPI_BK1_NCS
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = QSPI_BK1_IO3_Pin|QSPI_BK1_IO2_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF9_QSPI;
|
|
||||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = QSPI_BK1_IO0_Pin|QSPI_BK1_IO1_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
|
||||||
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = QSPI_CLK_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF9_QSPI;
|
|
||||||
HAL_GPIO_Init(QSPI_CLK_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = QSPI_BK1_NCS_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
|
||||||
HAL_GPIO_Init(QSPI_BK1_NCS_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN QUADSPI_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief QSPI MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hqspi: QSPI handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
|
|
||||||
{
|
|
||||||
if(hqspi->Instance==QUADSPI)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN QUADSPI_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_QSPI_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**QUADSPI GPIO Configuration
|
|
||||||
PF6 ------> QUADSPI_BK1_IO3
|
|
||||||
PF7 ------> QUADSPI_BK1_IO2
|
|
||||||
PF8 ------> QUADSPI_BK1_IO0
|
|
||||||
PF9 ------> QUADSPI_BK1_IO1
|
|
||||||
PB2 ------> QUADSPI_CLK
|
|
||||||
PG6 ------> QUADSPI_BK1_NCS
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOF, QSPI_BK1_IO3_Pin|QSPI_BK1_IO2_Pin|QSPI_BK1_IO0_Pin|QSPI_BK1_IO1_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(QSPI_CLK_GPIO_Port, QSPI_CLK_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(QSPI_BK1_NCS_GPIO_Port, QSPI_BK1_NCS_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN QUADSPI_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END QUADSPI_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief SD MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param hsd: SD handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(hsd->Instance==SDIO)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SDIO_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SDIO_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_SDIO_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
||||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
||||||
/**SDIO GPIO Configuration
|
|
||||||
PC8 ------> SDIO_D0
|
|
||||||
PC9 ------> SDIO_D1
|
|
||||||
PC10 ------> SDIO_D2
|
|
||||||
PC11 ------> SDIO_D3
|
|
||||||
PC12 ------> SDIO_CK
|
|
||||||
PD2 ------> SDIO_CMD
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = uSD_D0_Pin|uSD_D1_Pin|uSD_D2_Pin|uSD_D3_Pin
|
|
||||||
|uSD_CLK_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
|
||||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = uSD_CMD_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
|
|
||||||
HAL_GPIO_Init(uSD_CMD_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SDIO_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SDIO_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief SD MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param hsd: SD handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
|
|
||||||
{
|
|
||||||
if(hsd->Instance==SDIO)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN SDIO_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SDIO_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_SDIO_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**SDIO GPIO Configuration
|
|
||||||
PC8 ------> SDIO_D0
|
|
||||||
PC9 ------> SDIO_D1
|
|
||||||
PC10 ------> SDIO_D2
|
|
||||||
PC11 ------> SDIO_D3
|
|
||||||
PC12 ------> SDIO_CK
|
|
||||||
PD2 ------> SDIO_CMD
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOC, uSD_D0_Pin|uSD_D1_Pin|uSD_D2_Pin|uSD_D3_Pin
|
|
||||||
|uSD_CLK_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(uSD_CMD_GPIO_Port, uSD_CMD_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN SDIO_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SDIO_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief UART MSP Initialization
|
|
||||||
* This function configures the hardware resources used in this example
|
|
||||||
* @param huart: UART handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
||||||
{
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
||||||
if(huart->Instance==USART2)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END USART2_MspInit 0 */
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_USART2_CLK_ENABLE();
|
|
||||||
|
|
||||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
||||||
/**USART2 GPIO Configuration
|
|
||||||
PA2 ------> USART2_TX
|
|
||||||
PA3 ------> USART2_RX
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = STLINK_RX_Pin|STLINK_TX_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
|
||||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END USART2_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* @brief UART MSP De-Initialization
|
|
||||||
* This function freeze the hardware resources used in this example
|
|
||||||
* @param huart: UART handle pointer
|
|
||||||
* @retval None
|
|
||||||
*/
|
|
||||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
||||||
{
|
|
||||||
if(huart->Instance==USART2)
|
|
||||||
{
|
|
||||||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END USART2_MspDeInit 0 */
|
|
||||||
/* Peripheral clock disable */
|
|
||||||
__HAL_RCC_USART2_CLK_DISABLE();
|
|
||||||
|
|
||||||
/**USART2 GPIO Configuration
|
|
||||||
PA2 ------> USART2_TX
|
|
||||||
PA3 ------> USART2_RX
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(GPIOA, STLINK_RX_Pin|STLINK_TX_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END USART2_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
static uint32_t FSMC_Initialized = 0;
|
|
||||||
|
|
||||||
static void HAL_FSMC_MspInit(void){
|
|
||||||
/* USER CODE BEGIN FSMC_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END FSMC_MspInit 0 */
|
|
||||||
GPIO_InitTypeDef GPIO_InitStruct ={0};
|
|
||||||
if (FSMC_Initialized) {
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
FSMC_Initialized = 1;
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_FSMC_CLK_ENABLE();
|
|
||||||
|
|
||||||
/** FSMC GPIO Configuration
|
|
||||||
PF0 ------> FSMC_A0
|
|
||||||
PE7 ------> FSMC_D4
|
|
||||||
PE8 ------> FSMC_D5
|
|
||||||
PE9 ------> FSMC_D6
|
|
||||||
PE10 ------> FSMC_D7
|
|
||||||
PE11 ------> FSMC_D8
|
|
||||||
PE12 ------> FSMC_D9
|
|
||||||
PE13 ------> FSMC_D10
|
|
||||||
PE14 ------> FSMC_D11
|
|
||||||
PE15 ------> FSMC_D12
|
|
||||||
PD8 ------> FSMC_D13
|
|
||||||
PD9 ------> FSMC_D14
|
|
||||||
PD10 ------> FSMC_D15
|
|
||||||
PD14 ------> FSMC_D0
|
|
||||||
PD15 ------> FSMC_D1
|
|
||||||
PD0 ------> FSMC_D2
|
|
||||||
PD1 ------> FSMC_D3
|
|
||||||
PD4 ------> FSMC_NOE
|
|
||||||
PD5 ------> FSMC_NWE
|
|
||||||
PD7 ------> FSMC_NE1
|
|
||||||
*/
|
|
||||||
GPIO_InitStruct.Pin = A0_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
||||||
HAL_GPIO_Init(A0_GPIO_Port, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = D4_Pin|D5_Pin|D6_Pin|D7_Pin
|
|
||||||
|D8_Pin|D9_Pin|D10_Pin|D11_Pin
|
|
||||||
|D12_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
||||||
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
GPIO_InitStruct.Pin = D13_Pin|D14_Pin|D15_Pin|D0_Pin
|
|
||||||
|D1_Pin|D2_Pin|D3_Pin|FMC_NOE_Pin
|
|
||||||
|FMC_NWE_Pin|FMC_NE1_Pin;
|
|
||||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
||||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
||||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
||||||
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
|
|
||||||
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN FSMC_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END FSMC_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){
|
|
||||||
/* USER CODE BEGIN SRAM_MspInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SRAM_MspInit 0 */
|
|
||||||
HAL_FSMC_MspInit();
|
|
||||||
/* USER CODE BEGIN SRAM_MspInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SRAM_MspInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
static uint32_t FSMC_DeInitialized = 0;
|
|
||||||
|
|
||||||
static void HAL_FSMC_MspDeInit(void){
|
|
||||||
/* USER CODE BEGIN FSMC_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END FSMC_MspDeInit 0 */
|
|
||||||
if (FSMC_DeInitialized) {
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
FSMC_DeInitialized = 1;
|
|
||||||
/* Peripheral clock enable */
|
|
||||||
__HAL_RCC_FSMC_CLK_DISABLE();
|
|
||||||
|
|
||||||
/** FSMC GPIO Configuration
|
|
||||||
PF0 ------> FSMC_A0
|
|
||||||
PE7 ------> FSMC_D4
|
|
||||||
PE8 ------> FSMC_D5
|
|
||||||
PE9 ------> FSMC_D6
|
|
||||||
PE10 ------> FSMC_D7
|
|
||||||
PE11 ------> FSMC_D8
|
|
||||||
PE12 ------> FSMC_D9
|
|
||||||
PE13 ------> FSMC_D10
|
|
||||||
PE14 ------> FSMC_D11
|
|
||||||
PE15 ------> FSMC_D12
|
|
||||||
PD8 ------> FSMC_D13
|
|
||||||
PD9 ------> FSMC_D14
|
|
||||||
PD10 ------> FSMC_D15
|
|
||||||
PD14 ------> FSMC_D0
|
|
||||||
PD15 ------> FSMC_D1
|
|
||||||
PD0 ------> FSMC_D2
|
|
||||||
PD1 ------> FSMC_D3
|
|
||||||
PD4 ------> FSMC_NOE
|
|
||||||
PD5 ------> FSMC_NWE
|
|
||||||
PD7 ------> FSMC_NE1
|
|
||||||
*/
|
|
||||||
HAL_GPIO_DeInit(A0_GPIO_Port, A0_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(GPIOE, D4_Pin|D5_Pin|D6_Pin|D7_Pin
|
|
||||||
|D8_Pin|D9_Pin|D10_Pin|D11_Pin
|
|
||||||
|D12_Pin);
|
|
||||||
|
|
||||||
HAL_GPIO_DeInit(GPIOD, D13_Pin|D14_Pin|D15_Pin|D0_Pin
|
|
||||||
|D1_Pin|D2_Pin|D3_Pin|FMC_NOE_Pin
|
|
||||||
|FMC_NWE_Pin|FMC_NE1_Pin);
|
|
||||||
|
|
||||||
/* USER CODE BEGIN FSMC_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END FSMC_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){
|
|
||||||
/* USER CODE BEGIN SRAM_MspDeInit 0 */
|
|
||||||
|
|
||||||
/* USER CODE END SRAM_MspDeInit 0 */
|
|
||||||
HAL_FSMC_MspDeInit();
|
|
||||||
/* USER CODE BEGIN SRAM_MspDeInit 1 */
|
|
||||||
|
|
||||||
/* USER CODE END SRAM_MspDeInit 1 */
|
|
||||||
}
|
|
||||||
|
|
||||||
/* USER CODE BEGIN 1 */
|
|
||||||
|
|
||||||
/* USER CODE END 1 */
|
|
||||||
|
|
||||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
||||||
@ -24,6 +24,7 @@
|
|||||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
* THE SOFTWARE.
|
* THE SOFTWARE.
|
||||||
*/
|
*/
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
#include "shared-bindings/busio/I2C.h"
|
#include "shared-bindings/busio/I2C.h"
|
||||||
#include "py/mperrno.h"
|
#include "py/mperrno.h"
|
||||||
@ -32,52 +33,163 @@
|
|||||||
|
|
||||||
#include "shared-bindings/microcontroller/__init__.h"
|
#include "shared-bindings/microcontroller/__init__.h"
|
||||||
#include "supervisor/shared/translate.h"
|
#include "supervisor/shared/translate.h"
|
||||||
|
#include "common-hal/microcontroller/Pin.h"
|
||||||
|
|
||||||
I2C_HandleTypeDef hi2c2;
|
STATIC bool reserved_i2c[3];
|
||||||
|
|
||||||
|
void i2c_reset(void) {
|
||||||
|
//Note: I2Cs are also forcibly reset in construct, due to silicon error
|
||||||
|
#ifdef I2C1
|
||||||
|
reserved_i2c[0] = false;
|
||||||
|
__HAL_RCC_I2C1_CLK_DISABLE();
|
||||||
|
#endif
|
||||||
|
#ifdef I2C2
|
||||||
|
reserved_i2c[1] = false;
|
||||||
|
__HAL_RCC_I2C2_CLK_DISABLE();
|
||||||
|
#endif
|
||||||
|
#ifdef I2C3
|
||||||
|
reserved_i2c[3] = false;
|
||||||
|
__HAL_RCC_I2C3_CLK_DISABLE();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
|
void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
|
||||||
const mcu_pin_obj_t* scl, const mcu_pin_obj_t* sda, uint32_t frequency, uint32_t timeout) {
|
const mcu_pin_obj_t* scl, const mcu_pin_obj_t* sda, uint32_t frequency, uint32_t timeout) {
|
||||||
//TODO: Rework this entire section to use LL so we can properly assign pins
|
|
||||||
// This will also be bundled with MSP removal
|
//match pins to I2C objects
|
||||||
hi2c2.Instance = I2C1;
|
I2C_TypeDef * I2Cx;
|
||||||
hi2c2.Init.ClockSpeed = 100000;
|
|
||||||
hi2c2.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
uint8_t sda_len = sizeof(mcu_i2c_sda_list)/sizeof(*mcu_i2c_sda_list);
|
||||||
hi2c2.Init.OwnAddress1 = 0;
|
uint8_t scl_len = sizeof(mcu_i2c_scl_list)/sizeof(*mcu_i2c_scl_list);
|
||||||
hi2c2.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
for(uint i=0; i<sda_len;i++) {
|
||||||
hi2c2.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
if (mcu_i2c_sda_list[i].pin == sda) {
|
||||||
hi2c2.Init.OwnAddress2 = 0;
|
for(uint j=0; j<scl_len;j++) {
|
||||||
hi2c2.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
if ((mcu_i2c_scl_list[j].pin == scl)
|
||||||
hi2c2.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
&& (mcu_i2c_scl_list[j].i2c_index == mcu_i2c_sda_list[i].i2c_index)) {
|
||||||
if(HAL_I2C_Init(&hi2c2) != HAL_OK) {
|
self->scl = &mcu_i2c_scl_list[j];
|
||||||
mp_raise_RuntimeError(translate("I2C Init Error"));
|
self->sda = &mcu_i2c_sda_list[i];
|
||||||
} else {
|
break;
|
||||||
mp_printf(&mp_plat_print, "I2C INIT OK");
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
self->sda_pin = sda->number;
|
//handle typedef selection, errors
|
||||||
self->scl_pin = scl->number;
|
if(self->sda!=NULL && self->scl!=NULL ) {
|
||||||
|
I2Cx = mcu_i2c_banks[self->sda->i2c_index-1];
|
||||||
|
} else {
|
||||||
|
mp_raise_RuntimeError(translate("Invalid I2C pin selection"));
|
||||||
|
}
|
||||||
|
|
||||||
|
if(reserved_i2c[self->sda->i2c_index-1]) {
|
||||||
|
mp_raise_RuntimeError(translate("Hardware busy, try alternative pins"));
|
||||||
|
}
|
||||||
|
|
||||||
|
//Start GPIO for each pin
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
GPIO_InitStruct.Pin = pin_mask(sda->number);
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = self->sda->altfn_index;
|
||||||
|
HAL_GPIO_Init(pin_port(sda->port), &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = pin_mask(scl->number);
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = self->scl->altfn_index;
|
||||||
|
HAL_GPIO_Init(pin_port(scl->port), &GPIO_InitStruct);
|
||||||
|
|
||||||
|
//Fix for HAL error caused by soft reboot GPIO init SDA pin voltage drop. See Eratta.
|
||||||
|
//Must be in this exact spot or I2C will get stuck in infinite loop.
|
||||||
|
//TODO: See git issue #2172
|
||||||
|
#ifdef I2C1
|
||||||
|
__HAL_RCC_I2C1_FORCE_RESET();
|
||||||
|
HAL_Delay(2);
|
||||||
|
__HAL_RCC_I2C1_RELEASE_RESET();
|
||||||
|
#endif
|
||||||
|
#ifdef I2C2
|
||||||
|
__HAL_RCC_I2C2_FORCE_RESET();
|
||||||
|
HAL_Delay(2);
|
||||||
|
__HAL_RCC_I2C2_RELEASE_RESET();
|
||||||
|
#endif
|
||||||
|
#ifdef I2C3
|
||||||
|
__HAL_RCC_I2C3_FORCE_RESET();
|
||||||
|
HAL_Delay(2);
|
||||||
|
__HAL_RCC_I2C3_RELEASE_RESET();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//Keep separate so above hack can be cleanly replaced
|
||||||
|
#ifdef I2C1
|
||||||
|
if(I2Cx==I2C1) {
|
||||||
|
reserved_i2c[0] = true;
|
||||||
|
__HAL_RCC_I2C1_CLK_ENABLE();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#ifdef I2C2
|
||||||
|
if(I2Cx==I2C2) {
|
||||||
|
reserved_i2c[1] = true;
|
||||||
|
__HAL_RCC_I2C2_CLK_ENABLE();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#ifdef I2C3
|
||||||
|
if(I2Cx==I2C3) {
|
||||||
|
reserved_i2c[2] = true;
|
||||||
|
__HAL_RCC_I2C3_CLK_ENABLE();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
self->handle.Instance = I2Cx;
|
||||||
|
self->handle.Init.ClockSpeed = 100000;
|
||||||
|
self->handle.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
||||||
|
self->handle.Init.OwnAddress1 = 0;
|
||||||
|
self->handle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
||||||
|
self->handle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
||||||
|
self->handle.Init.OwnAddress2 = 0;
|
||||||
|
self->handle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
||||||
|
self->handle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
||||||
|
if(HAL_I2C_Init(&(self->handle)) != HAL_OK) {
|
||||||
|
mp_raise_RuntimeError(translate("I2C Init Error"));
|
||||||
|
}
|
||||||
claim_pin(sda);
|
claim_pin(sda);
|
||||||
claim_pin(scl);
|
claim_pin(scl);
|
||||||
}
|
}
|
||||||
|
|
||||||
bool common_hal_busio_i2c_deinited(busio_i2c_obj_t *self) {
|
bool common_hal_busio_i2c_deinited(busio_i2c_obj_t *self) {
|
||||||
return self->sda_pin == NO_PIN;
|
return self->sda->pin == mp_const_none;
|
||||||
}
|
}
|
||||||
|
|
||||||
void common_hal_busio_i2c_deinit(busio_i2c_obj_t *self) {
|
void common_hal_busio_i2c_deinit(busio_i2c_obj_t *self) {
|
||||||
if (common_hal_busio_i2c_deinited(self)) {
|
if (common_hal_busio_i2c_deinited(self)) {
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
#ifdef I2C1
|
||||||
HAL_I2C_MspDeInit(&hi2c2);
|
if(self->handle.Instance==I2C1) {
|
||||||
|
reserved_i2c[0] = 0;
|
||||||
self->sda_pin = NO_PIN;
|
__HAL_RCC_I2C1_CLK_DISABLE();
|
||||||
self->scl_pin = NO_PIN;
|
}
|
||||||
|
#endif
|
||||||
|
#ifdef I2C2
|
||||||
|
if(self->handle.Instance==I2C2) {
|
||||||
|
reserved_i2c[1] = 0;
|
||||||
|
__HAL_RCC_I2C2_CLK_DISABLE();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#ifdef I2C3
|
||||||
|
if(self->handle.Instance==I2C3) {
|
||||||
|
reserved_i2c[3] = 0;
|
||||||
|
__HAL_RCC_I2C3_CLK_DISABLE();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
reset_pin_number(self->sda->pin->port,self->sda->pin->number);
|
||||||
|
reset_pin_number(self->scl->pin->port,self->scl->pin->number);
|
||||||
|
self->sda = mp_const_none;
|
||||||
|
self->scl = mp_const_none;
|
||||||
}
|
}
|
||||||
|
|
||||||
bool common_hal_busio_i2c_probe(busio_i2c_obj_t *self, uint8_t addr) {
|
bool common_hal_busio_i2c_probe(busio_i2c_obj_t *self, uint8_t addr) {
|
||||||
return HAL_I2C_IsDeviceReady(&hi2c2, (uint16_t)(addr<<1),2,2) == HAL_OK;
|
return HAL_I2C_IsDeviceReady(&(self->handle), (uint16_t)(addr<<1),2,2) == HAL_OK;
|
||||||
}
|
}
|
||||||
|
|
||||||
bool common_hal_busio_i2c_try_lock(busio_i2c_obj_t *self) {
|
bool common_hal_busio_i2c_try_lock(busio_i2c_obj_t *self) {
|
||||||
@ -109,10 +221,11 @@ void common_hal_busio_i2c_unlock(busio_i2c_obj_t *self) {
|
|||||||
|
|
||||||
uint8_t common_hal_busio_i2c_write(busio_i2c_obj_t *self, uint16_t addr,
|
uint8_t common_hal_busio_i2c_write(busio_i2c_obj_t *self, uint16_t addr,
|
||||||
const uint8_t *data, size_t len, bool transmit_stop_bit) {
|
const uint8_t *data, size_t len, bool transmit_stop_bit) {
|
||||||
return HAL_I2C_Master_Transmit(&hi2c2, (uint16_t)(addr<<1), (uint8_t *)data, (uint16_t)len, 2) == HAL_OK ? 0 : MP_EIO;
|
HAL_StatusTypeDef result = HAL_I2C_Master_Transmit(&(self->handle), (uint16_t)(addr<<1), (uint8_t *)data, (uint16_t)len, 2);
|
||||||
|
return result == HAL_OK ? 0 : MP_EIO;
|
||||||
}
|
}
|
||||||
|
|
||||||
uint8_t common_hal_busio_i2c_read(busio_i2c_obj_t *self, uint16_t addr,
|
uint8_t common_hal_busio_i2c_read(busio_i2c_obj_t *self, uint16_t addr,
|
||||||
uint8_t *data, size_t len) {
|
uint8_t *data, size_t len) {
|
||||||
return HAL_I2C_Master_Receive(&hi2c2, (uint16_t)(addr<<1), data, (uint16_t)len, 2) == HAL_OK ? 0 : MP_EIO;
|
return HAL_I2C_Master_Receive(&(self->handle), (uint16_t)(addr<<1), data, (uint16_t)len, 2) == HAL_OK ? 0 : MP_EIO;
|
||||||
}
|
}
|
||||||
|
|||||||
@ -31,15 +31,18 @@
|
|||||||
#include "common-hal/microcontroller/Pin.h"
|
#include "common-hal/microcontroller/Pin.h"
|
||||||
|
|
||||||
#include "stm32f4xx_hal.h"
|
#include "stm32f4xx_hal.h"
|
||||||
|
#include "stm32f4/periph.h"
|
||||||
|
|
||||||
#include "py/obj.h"
|
#include "py/obj.h"
|
||||||
|
|
||||||
typedef struct {
|
typedef struct {
|
||||||
mp_obj_base_t base;
|
mp_obj_base_t base;
|
||||||
I2C_HandleTypeDef i2c_handle;
|
I2C_HandleTypeDef handle;
|
||||||
bool has_lock;
|
bool has_lock;
|
||||||
uint8_t scl_pin;
|
const mcu_i2c_scl_obj_t *scl;
|
||||||
uint8_t sda_pin;
|
const mcu_i2c_sda_obj_t *sda;
|
||||||
} busio_i2c_obj_t;
|
} busio_i2c_obj_t;
|
||||||
|
|
||||||
|
void i2c_reset(void);
|
||||||
|
|
||||||
#endif // MICROPY_INCLUDED_STM32F4_COMMON_HAL_BUSIO_I2C_H
|
#endif // MICROPY_INCLUDED_STM32F4_COMMON_HAL_BUSIO_I2C_H
|
||||||
|
|||||||
66
ports/stm32f4/common-hal/os/__init__.c
Normal file
66
ports/stm32f4/common-hal/os/__init__.c
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "genhdr/mpversion.h"
|
||||||
|
#include "py/mpconfig.h"
|
||||||
|
#include "py/objstr.h"
|
||||||
|
#include "py/objtuple.h"
|
||||||
|
|
||||||
|
STATIC const qstr os_uname_info_fields[] = {
|
||||||
|
MP_QSTR_sysname, MP_QSTR_nodename,
|
||||||
|
MP_QSTR_release, MP_QSTR_version, MP_QSTR_machine
|
||||||
|
};
|
||||||
|
STATIC const MP_DEFINE_STR_OBJ(os_uname_info_sysname_obj, "stm32f4");
|
||||||
|
STATIC const MP_DEFINE_STR_OBJ(os_uname_info_nodename_obj, "stm32f4");
|
||||||
|
|
||||||
|
STATIC const MP_DEFINE_STR_OBJ(os_uname_info_release_obj, MICROPY_VERSION_STRING);
|
||||||
|
STATIC const MP_DEFINE_STR_OBJ(os_uname_info_version_obj, MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE);
|
||||||
|
STATIC const MP_DEFINE_STR_OBJ(os_uname_info_machine_obj, MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME);
|
||||||
|
|
||||||
|
STATIC MP_DEFINE_ATTRTUPLE(
|
||||||
|
os_uname_info_obj,
|
||||||
|
os_uname_info_fields,
|
||||||
|
5,
|
||||||
|
(mp_obj_t)&os_uname_info_sysname_obj,
|
||||||
|
(mp_obj_t)&os_uname_info_nodename_obj,
|
||||||
|
(mp_obj_t)&os_uname_info_release_obj,
|
||||||
|
(mp_obj_t)&os_uname_info_version_obj,
|
||||||
|
(mp_obj_t)&os_uname_info_machine_obj
|
||||||
|
);
|
||||||
|
|
||||||
|
mp_obj_t common_hal_os_uname(void) {
|
||||||
|
return (mp_obj_t)&os_uname_info_obj;
|
||||||
|
}
|
||||||
|
|
||||||
|
bool common_hal_os_urandom(uint8_t *buffer, uint32_t length) {
|
||||||
|
|
||||||
|
for (uint32_t i = 0; i < length; i++) {
|
||||||
|
buffer[i] = 4; //read in my coffee dregs; the truest random number, chosen by Nrthalotep
|
||||||
|
//todo: spurn the gods, replace with actual code.
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
@ -21,6 +21,8 @@ CIRCUITPY_ANALOGIO = 1
|
|||||||
CIRCUITPY_MICROCONTROLLER = 1
|
CIRCUITPY_MICROCONTROLLER = 1
|
||||||
CIRCUITPY_BUSIO = 1
|
CIRCUITPY_BUSIO = 1
|
||||||
CIRCUITPY_TIME = 1
|
CIRCUITPY_TIME = 1
|
||||||
|
CIRCUITPY_OS = 1
|
||||||
|
CIRCUITPY_STRUCT = 1
|
||||||
|
|
||||||
#ifeq ($(MCU_SUB_VARIANT), stm32f412zx)
|
#ifeq ($(MCU_SUB_VARIANT), stm32f412zx)
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
74
ports/stm32f4/peripherals/stm32f4/periph.h
Normal file
74
ports/stm32f4/peripherals/stm32f4/periph.h
Normal file
@ -0,0 +1,74 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __MICROPY_INCLUDED_STM32F4_PERIPHERALS_PERIPH_H__
|
||||||
|
#define __MICROPY_INCLUDED_STM32F4_PERIPHERALS_PERIPH_H__
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
|
#include "stm32f4xx_hal.h"
|
||||||
|
#include "stm32f4/pins.h"
|
||||||
|
|
||||||
|
// Address Version
|
||||||
|
typedef struct {
|
||||||
|
uint8_t i2c_index:4; // Index of the I2C unit (1 to 3)
|
||||||
|
uint8_t altfn_index:4; //Index of the altfn for this pin (0 to 15)
|
||||||
|
const mcu_pin_obj_t * pin;
|
||||||
|
} mcu_i2c_sda_obj_t;
|
||||||
|
|
||||||
|
// Address Version
|
||||||
|
typedef struct {
|
||||||
|
uint8_t i2c_index:4; // Index of the I2C unit (1 to 3)
|
||||||
|
uint8_t altfn_index:4; //Index of the altfn for this pin (0 to 15)
|
||||||
|
const mcu_pin_obj_t * pin;
|
||||||
|
} mcu_i2c_scl_obj_t;
|
||||||
|
|
||||||
|
|
||||||
|
#define I2C_SDA(index, alt, sda_pin) \
|
||||||
|
{ \
|
||||||
|
.i2c_index = index, \
|
||||||
|
.altfn_index = alt, \
|
||||||
|
.pin = sda_pin, \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define I2C_SCL(index, alt, scl_pin) \
|
||||||
|
{ \
|
||||||
|
.i2c_index = index, \
|
||||||
|
.altfn_index = alt, \
|
||||||
|
.pin = scl_pin, \
|
||||||
|
}
|
||||||
|
|
||||||
|
// TODO: SPI, UART, etc
|
||||||
|
|
||||||
|
// Choose based on chip
|
||||||
|
#ifdef STM32F412Zx
|
||||||
|
#include "stm32f412zx/periph.h"
|
||||||
|
#endif
|
||||||
|
#ifdef STM32F411xE
|
||||||
|
#include "stm32f411xe/periph.h"
|
||||||
|
#endif
|
||||||
|
#endif // __MICROPY_INCLUDED_STM32F4_PERIPHERALS_PERIPH_H__
|
||||||
52
ports/stm32f4/peripherals/stm32f4/stm32f411xe/periph.c
Normal file
52
ports/stm32f4/peripherals/stm32f4/stm32f411xe/periph.c
Normal file
@ -0,0 +1,52 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "py/obj.h"
|
||||||
|
#include "py/mphal.h"
|
||||||
|
#include "stm32f4/pins.h"
|
||||||
|
#include "stm32f4/periph.h"
|
||||||
|
|
||||||
|
// I2C
|
||||||
|
|
||||||
|
I2C_TypeDef * mcu_i2c_banks[3] = {I2C1, I2C2, I2C3};
|
||||||
|
|
||||||
|
const mcu_i2c_sda_obj_t mcu_i2c_sda_list[7] = {
|
||||||
|
I2C_SDA(1, 4, &pin_PB07),
|
||||||
|
I2C_SDA(1, 4, &pin_PB09),
|
||||||
|
I2C_SDA(2, 9, &pin_PB09),
|
||||||
|
I2C_SDA(2, 9, &pin_PB03),
|
||||||
|
I2C_SDA(3, 4, &pin_PC09),
|
||||||
|
I2C_SDA(3, 9, &pin_PB04),
|
||||||
|
I2C_SDA(3, 9, &pin_PB08)
|
||||||
|
};
|
||||||
|
|
||||||
|
const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4] = {
|
||||||
|
I2C_SCL(1, 4, &pin_PB06),
|
||||||
|
I2C_SCL(1, 4, &pin_PB08),
|
||||||
|
I2C_SCL(2, 4, &pin_PB10),
|
||||||
|
I2C_SCL(3, 4, &pin_PA08)
|
||||||
|
};
|
||||||
|
//SPI, UART, Etc
|
||||||
36
ports/stm32f4/peripherals/stm32f4/stm32f411xe/periph.h
Normal file
36
ports/stm32f4/peripherals/stm32f4/stm32f411xe/periph.h
Normal file
@ -0,0 +1,36 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||||
|
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||||
|
|
||||||
|
//I2C
|
||||||
|
extern I2C_TypeDef * mcu_i2c_banks[3];
|
||||||
|
|
||||||
|
extern const mcu_i2c_sda_obj_t mcu_i2c_sda_list[7];
|
||||||
|
extern const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4];
|
||||||
|
|
||||||
|
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||||
53
ports/stm32f4/peripherals/stm32f4/stm32f412zx/periph.c
Normal file
53
ports/stm32f4/peripherals/stm32f4/stm32f412zx/periph.c
Normal file
@ -0,0 +1,53 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "py/obj.h"
|
||||||
|
#include "py/mphal.h"
|
||||||
|
#include "stm32f4/pins.h"
|
||||||
|
#include "stm32f4/periph.h"
|
||||||
|
|
||||||
|
// I2C
|
||||||
|
|
||||||
|
I2C_TypeDef * mcu_i2c_banks[3] = {I2C1, I2C2, I2C3};
|
||||||
|
|
||||||
|
const mcu_i2c_sda_obj_t mcu_i2c_sda_list[8] = {
|
||||||
|
I2C_SDA(1, 4, &pin_PB07),
|
||||||
|
I2C_SDA(1, 4, &pin_PB09),
|
||||||
|
I2C_SDA(2, 4, &pin_PB11), //not on LQFP100
|
||||||
|
I2C_SDA(2, 9, &pin_PB09),
|
||||||
|
I2C_SDA(2, 9, &pin_PB03),
|
||||||
|
I2C_SDA(3, 4, &pin_PC09),
|
||||||
|
I2C_SDA(3, 9, &pin_PB04),
|
||||||
|
I2C_SDA(3, 9, &pin_PB08)
|
||||||
|
};
|
||||||
|
|
||||||
|
const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4] = {
|
||||||
|
I2C_SCL(1, 4, &pin_PB06),
|
||||||
|
I2C_SCL(1, 4, &pin_PB08),
|
||||||
|
I2C_SCL(2, 4, &pin_PB10),
|
||||||
|
I2C_SCL(3, 4, &pin_PA08)
|
||||||
|
};
|
||||||
|
//SPI, UART, Etc
|
||||||
37
ports/stm32f4/peripherals/stm32f4/stm32f412zx/periph.h
Normal file
37
ports/stm32f4/peripherals/stm32f4/stm32f412zx/periph.h
Normal file
@ -0,0 +1,37 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the MicroPython project, http://micropython.org/
|
||||||
|
*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||||
|
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||||
|
|
||||||
|
//I2C
|
||||||
|
extern I2C_TypeDef * mcu_i2c_banks[3];
|
||||||
|
|
||||||
|
extern const mcu_i2c_sda_obj_t mcu_i2c_sda_list[8];
|
||||||
|
extern const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4];
|
||||||
|
|
||||||
|
|
||||||
|
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
|
||||||
@ -31,6 +31,7 @@
|
|||||||
#include "tick.h"
|
#include "tick.h"
|
||||||
|
|
||||||
#include "common-hal/microcontroller/Pin.h"
|
#include "common-hal/microcontroller/Pin.h"
|
||||||
|
#include "common-hal/busio/I2C.h"
|
||||||
|
|
||||||
#include "stm32f4/clocks.h"
|
#include "stm32f4/clocks.h"
|
||||||
#include "stm32f4/gpio.h"
|
#include "stm32f4/gpio.h"
|
||||||
@ -39,6 +40,8 @@
|
|||||||
|
|
||||||
safe_mode_t port_init(void) {
|
safe_mode_t port_init(void) {
|
||||||
HAL_Init();
|
HAL_Init();
|
||||||
|
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||||
|
__HAL_RCC_PWR_CLK_ENABLE();
|
||||||
|
|
||||||
stm32f4_peripherals_clocks_init();
|
stm32f4_peripherals_clocks_init();
|
||||||
stm32f4_peripherals_gpio_init();
|
stm32f4_peripherals_gpio_init();
|
||||||
@ -51,6 +54,7 @@ safe_mode_t port_init(void) {
|
|||||||
|
|
||||||
void reset_port(void) {
|
void reset_port(void) {
|
||||||
reset_all_pins();
|
reset_all_pins();
|
||||||
|
i2c_reset();
|
||||||
}
|
}
|
||||||
|
|
||||||
void reset_to_bootloader(void) {
|
void reset_to_bootloader(void) {
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user