djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added notes on flashing bootloader

This commit is contained in:
Kevin Townsend 2018-02-13 11:26:10 +01:00
parent 4745272d6c
commit fc28fc4f0b
1 changed files with 58 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
ports/nrf/boards/feather52840/README.md
View File

@ -21,7 +21,7 @@ $ cd ports/nrf
$ ./drivers/bluetooth/download_ble_stack.sh
```
## Serial Bootloader
## Installing the Serial Bootloader
The Adafruit nRF52840 Feather uses a serial bootloader that allows you to
update the core CircuitPython firmware and internal file system contents
@ -31,14 +31,70 @@ On empty devices, the serial bootloader will need to be flashed once using a
HW debugger such as a Segger J-Link before the serial updater (`nrfutil`) can
be used.
### Install the Bootloader with `nrfjprog`
### Install `nrfjprog`
Before you can install the bootloader, you will first need to install the
`nrfjprog` tool from Nordic Semiconductors for your operating system. The
binary files can be downloaded via the following links:
- [nRF5x toolset tar for Linux 32-bit v9.7.2](http://www.nordicsemi.com/eng/nordic/Products/nRF52832/nRF5x-Command-Line-Tools-Linux32/52619)
- [nRF5x toolset tar for Linux 64-bit v9.7.2](http://www.nordicsemi.com/eng/nordic/Products/nRF52832/nRF5x-Command-Line-Tools-Linux64/51388)
- [nRF5x toolset tar for OSX v9.7.2](http://www.nordicsemi.com/eng/nordic/Products/nRF52832/nRF5x-Command-Line-Tools-OSX/53406)
- [nRF5x toolset installer for Windows v9.7.2](http://www.nordicsemi.com/eng/nordic/Products/nRF52832/nRF5x-Command-Line-Tools-Win32/48768)
You will then need to add the `nrfjprog` folder to your system `PATH` variable
so that it is available from the command line. The exact process for this is
OS specific, but on a POSIX type system like OS X or Linux, you can
temporarily add the location to your `PATH` environment variables as follows:
```
$ export PATH=$PATH:YOURPATHHERE/nRF5x-Command-Line-Tools_9_7_2_OSX/nrfjprog/
```
You can test this by running the following command:
```
$ nrfjprog --version
nrfjprog version: 9.7.2
JLinkARM.dll version: 6.20f
```
### Flash the Bootloader with `nrfjprog`
> This operation only needs to be done once, and only on boards that don't
already have the serial bootloader installed.
Once `nrfjprog` is installed and available in `PATH` you can flash your
board with the serial bootloader via the following command:
```
make SD=s140 BOARD=feather52840 boot-flash
```
This should give you the following (or very similar) output, and you will see
a DFU blinky pattern on one of the board LEDs:
```
$ make SD=s140 BOARD=feather52840 boot-flash
Use make V=1, make V=2 or set BUILD_VERBOSE similarly in your environment to increase build verbosity.
nrfjprog --program boards/feather52840/bootloader/feather52840_bootloader_6.0.0_s140_single.hex -f nrf52 --chiperase --reset
Parsing hex file.
Erasing user available code and UICR flash areas.
Applying system reset.
Checking that the area to write is not protected.
Programing device.
Applying system reset.
Run.
```
From this point onward, you can now use a simple serial port for firmware
updates.
## Building and Flashing CircuitPython
With the serial bootloader present on your board, you can build and flash
a CircuitPython binary via the following command:
```
make SD=s140 SERIAL=/dev/ttyACM0 BOARD=feather52840 dfu-gen dfu-flash
```