diff --git a/docs/tutorial/img/pyboard_servo.jpg b/docs/tutorial/img/pyboard_servo.jpg
new file mode 100644
index 0000000000..0d64e46c42
Binary files /dev/null and b/docs/tutorial/img/pyboard_servo.jpg differ
diff --git a/docs/tutorial/img/pyboard_usb_micro.jpg b/docs/tutorial/img/pyboard_usb_micro.jpg
new file mode 100644
index 0000000000..bc1c2b8323
Binary files /dev/null and b/docs/tutorial/img/pyboard_usb_micro.jpg differ
diff --git a/docs/tutorial/script.rst b/docs/tutorial/script.rst
index 9b1df408fd..5f70b72507 100644
--- a/docs/tutorial/script.rst
+++ b/docs/tutorial/script.rst
@@ -10,7 +10,7 @@ Connecting your pyboard
Connect your pyboard to your PC (Windows, Mac or Linux) with a micro USB cable.
There is only one way that the cable will connect, so you can't get it wrong.
-
+.. image:: img/pyboard_usb_micro.jpg
When the pyboard is connected to your PC it will power on and enter the start up
process (the boot process). The green LED should light up for half a second or
diff --git a/docs/tutorial/servo.rst b/docs/tutorial/servo.rst
index 31ab47d109..83d1b0cc15 100644
--- a/docs/tutorial/servo.rst
+++ b/docs/tutorial/servo.rst
@@ -8,7 +8,7 @@ These motors have 3 wires: ground, power and signal. On the pyboard you
can connect them in the bottom right corner, with the signal pin on the
far right. Pins X1, X2, X3 and X4 are the 4 dedicated servo signal pins.
-
+.. image:: img/pyboard_servo.jpg
In this picture there are male-male double adaptors to connect the servos
to the header pins on the pyboard.