djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #6753 from tannewt/esp_led_reset

Browse Source 
Audit all boards with LED pins defined
This commit is contained in:
MicroDev 2022-08-13 15:25:02 +05:30 committed by GitHub
commit fa3e265bfb
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
39 changed files with 96 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ports/espressif/boards/adafruit_esp32s2_camera/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO21) #define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
#define MICROPY_HW_NEOPIXEL_COUNT (6) #define MICROPY_HW_NEOPIXEL_COUNT (6)
#define MICROPY_HW_LED_STATUS (&pin_GPIO2)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)

12
ports/espressif/boards/adafruit_feather_esp32_v2/board.c
View File

@ -49,17 +49,5 @@ void board_deinit(void) {
} }
bool espressif_board_reset_pin_number(gpio_num_t pin_number) { bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
// Pull LED down on reset rather than the default up
if (pin_number == 13) {
gpio_config_t cfg = {
.pin_bit_mask = BIT64(pin_number),
.mode = GPIO_MODE_DISABLE,
.pull_up_en = false,
.pull_down_en = true,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&cfg);
return true;
}
return false; return false;
} }

2
ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO0) #define MICROPY_HW_NEOPIXEL (&pin_GPIO0)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO2) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO2)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define CIRCUITPY_BOARD_I2C (1) #define CIRCUITPY_BOARD_I2C (1)
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO20, .sda = &pin_GPIO22}} #define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO20, .sda = &pin_GPIO22}}

2
ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

12
ports/espressif/boards/adafruit_feather_esp32s2_tft/board.c
View File

@ -141,18 +141,6 @@ bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
gpio_set_level(21, true); gpio_set_level(21, true);
return true; return true;
} }
// Pull LED down on reset rather than the default up
if (pin_number == 13) {
gpio_config_t cfg = {
.pin_bit_mask = BIT64(pin_number),
.mode = GPIO_MODE_DISABLE,
.pull_up_en = false,
.pull_down_en = true,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&cfg);
return true;
}
return false; return false;
} }

2
ports/espressif/boards/adafruit_feather_esp32s2_tft/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO41) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO41)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO42) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO42)

2
ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

2
ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

2
ports/espressif/boards/adafruit_feather_esp32s3_nopsram/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO3) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)

2
ports/espressif/boards/adafruit_feather_esp32s3_tft/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO41) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO41)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO42) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO42)

2
ports/espressif/boards/adafruit_funhouse/mpconfigboard.h
View File

@ -33,6 +33,8 @@
#define MICROPY_HW_APA102_SCK (&pin_GPIO15) #define MICROPY_HW_APA102_SCK (&pin_GPIO15)
#define MICROPY_HW_APA102_COUNT (5) #define MICROPY_HW_APA102_COUNT (5)
#define MICROPY_HW_LED_STATUS (&pin_GPIO37)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO33) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO33)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO34) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO34)

2
ports/espressif/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
View File

@ -34,6 +34,8 @@
#define CIRCUITPY_STATUS_LED_POWER_INVERTED (1) #define CIRCUITPY_STATUS_LED_POWER_INVERTED (1)
#define MICROPY_HW_NEOPIXEL_COUNT (4) #define MICROPY_HW_NEOPIXEL_COUNT (4)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

2
ports/espressif/boards/adafruit_metro_esp32s2/mpconfigboard.h
View File

@ -31,6 +31,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45) #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define MICROPY_HW_LED_STATUS (&pin_GPIO42)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

2
ports/espressif/boards/beetle-esp32-c3/mpconfigboard.h
View File

@ -30,7 +30,7 @@
#define MICROPY_HW_MCU_NAME "ESP32-C3FN4" #define MICROPY_HW_MCU_NAME "ESP32-C3FN4"
// Status LED // Status LED
#define MICROPY_HW_NEOPIXEL (&pin_GPIO10) #define MICROPY_HW_LED_STATUS (&pin_GPIO10)
#define CIRCUITPY_BOARD_I2C (1) #define CIRCUITPY_BOARD_I2C (1)
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO9, .sda = &pin_GPIO8}} #define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO9, .sda = &pin_GPIO8}}

4
ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
View File

@ -28,3 +28,7 @@
#define MICROPY_HW_BOARD_NAME "CrumpS2" #define MICROPY_HW_BOARD_NAME "CrumpS2"
#define MICROPY_HW_MCU_NAME "ESP32S2" #define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_APA102_MOSI (&pin_GPIO40)
#define MICROPY_HW_APA102_SCK (&pin_GPIO45)
#define MICROPY_HW_APA102_COUNT (1)

3
ports/espressif/boards/cytron_maker_feather_aiot_s3/mpconfigboard.h
View File

@ -30,7 +30,8 @@
#define MICROPY_HW_MCU_NAME "ESP32S3" #define MICROPY_HW_MCU_NAME "ESP32S3"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO46) #define MICROPY_HW_NEOPIXEL (&pin_GPIO46)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO13)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO41) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO41)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO42) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO42)

2
ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
View File

@ -28,3 +28,5 @@
#define MICROPY_HW_BOARD_NAME "BastWiFi" #define MICROPY_HW_BOARD_NAME "BastWiFi"
#define MICROPY_HW_MCU_NAME "ESP32S2" #define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_LED_STATUS (&pin_GPIO14)

15
ports/espressif/boards/espressif_esp32_eye/board.c
View File

@ -44,3 +44,18 @@ void reset_board(void) {
void board_deinit(void) { void board_deinit(void) {
} }
bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
// Pull LEDs down on reset rather than the default up
if (pin_number == 21 || pin_number == 22) {
gpio_config_t cfg = {
.pin_bit_mask = BIT64(pin_number),
.mode = GPIO_MODE_DISABLE,
.pull_up_en = false,
.pull_down_en = true,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&cfg);
return true;
}
return false;
}

2
ports/espressif/boards/espressif_esp32_eye/mpconfigboard.h
View File

@ -29,6 +29,8 @@
#define MICROPY_HW_BOARD_NAME "Espressif ESP32-EYE" #define MICROPY_HW_BOARD_NAME "Espressif ESP32-EYE"
#define MICROPY_HW_MCU_NAME "ESP32" #define MICROPY_HW_MCU_NAME "ESP32"
#define MICROPY_HW_LED_STATUS (&pin_GPIO21)
#define CIRCUITPY_BOARD_I2C (1) #define CIRCUITPY_BOARD_I2C (1)
#define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO23, .sda = &pin_GPIO18}} #define CIRCUITPY_BOARD_I2C_PIN {{.scl = &pin_GPIO23, .sda = &pin_GPIO18}}

1
ports/espressif/boards/espressif_esp32s3_eye/pins.c
View File

@ -46,7 +46,6 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO43) }, { MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO43) },
{ MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO44) }, { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO44) },
{ MP_ROM_QSTR(MP_QSTR_BACKLIGHT), MP_ROM_PTR(&pin_GPIO48) }, { MP_ROM_QSTR(MP_QSTR_BACKLIGHT), MP_ROM_PTR(&pin_GPIO48) },
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },

3
ports/espressif/boards/gravitech_cucumber_m/mpconfigboard.h
View File

@ -31,5 +31,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define MICROPY_HW_LED_STATUS (&pin_GPIO2)
#define MICROPY_HW_LED_STATUS_INVERTED (1)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43) #define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44) #define DEFAULT_UART_BUS_RX (&pin_GPIO44)

3
ports/espressif/boards/gravitech_cucumber_ms/mpconfigboard.h
View File

@ -31,6 +31,9 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define MICROPY_HW_LED_STATUS (&pin_GPIO2)
#define MICROPY_HW_LED_STATUS_INVERTED (1)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO40) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO41) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)

3
ports/espressif/boards/gravitech_cucumber_r/mpconfigboard.h
View File

@ -31,5 +31,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define MICROPY_HW_LED_STATUS (&pin_GPIO2)
#define MICROPY_HW_LED_STATUS_INVERTED (1)
#define DEFAULT_UART_BUS_TX (&pin_GPIO43) #define DEFAULT_UART_BUS_TX (&pin_GPIO43)
#define DEFAULT_UART_BUS_RX (&pin_GPIO44) #define DEFAULT_UART_BUS_RX (&pin_GPIO44)

3
ports/espressif/boards/gravitech_cucumber_rs/mpconfigboard.h
View File

@ -31,6 +31,9 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
#define MICROPY_HW_LED_STATUS (&pin_GPIO2)
#define MICROPY_HW_LED_STATUS_INVERTED (1)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO40) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO41) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)

2
ports/espressif/boards/hexky_s2/mpconfigboard.h
View File

@ -30,7 +30,7 @@
#define MICROPY_HW_MCU_NAME "ESP32S2" #define MICROPY_HW_MCU_NAME "ESP32S2"
#define MICROPY_HW_NEOPIXEL (&pin_GPIO40) #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39) #define MICROPY_HW_LED_STATUS (&pin_GPIO39)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

16
ports/espressif/boards/lilygo_ttgo_t-01c3/board.c
View File

@ -15,22 +15,6 @@ bool board_requests_safe_mode(void) {
return false; return false;
} }
bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
// Pull LED down on reset rather than the default up
if (pin_number == MICROPY_HW_LED_STATUS->number) {
gpio_config_t cfg = {
.pin_bit_mask = BIT64(pin_number),
.mode = GPIO_MODE_DISABLE,
.pull_up_en = false,
.pull_down_en = true,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&cfg);
return true;
}
return false;
}
void reset_board(void) { void reset_board(void) {
} }

16
ports/espressif/boards/lilygo_ttgo_t-oi-plus/board.c
View File

@ -15,22 +15,6 @@ bool board_requests_safe_mode(void) {
return false; return false;
} }
bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
// Pull LED down on reset rather than the default up
if (pin_number == MICROPY_HW_LED_STATUS->number) {
gpio_config_t cfg = {
.pin_bit_mask = BIT64(pin_number),
.mode = GPIO_MODE_DISABLE,
.pull_up_en = false,
.pull_down_en = true,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&cfg);
return true;
}
return false;
}
void reset_board(void) { void reset_board(void) {
} }

2
ports/espressif/boards/lolin_s2_mini/mpconfigboard.h
View File

@ -29,6 +29,8 @@
#define MICROPY_HW_BOARD_NAME "S2Mini" #define MICROPY_HW_BOARD_NAME "S2Mini"
#define MICROPY_HW_MCU_NAME "ESP32S2-S2FN4R2" // from Wemos MP #define MICROPY_HW_MCU_NAME "ESP32S2-S2FN4R2" // from Wemos MP
#define MICROPY_HW_LED_STATUS (&pin_GPIO15)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO35) // no I2C labels on S2 Mini, def from Wemos MP #define DEFAULT_I2C_BUS_SCL (&pin_GPIO35) // no I2C labels on S2 Mini, def from Wemos MP
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) // no I2C labels on S2 Mini, def from Wemos MP #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) // no I2C labels on S2 Mini, def from Wemos MP

2
ports/espressif/boards/lolin_s2_pico/mpconfigboard.h
View File

@ -29,6 +29,8 @@
#define MICROPY_HW_BOARD_NAME "S2Pico" #define MICROPY_HW_BOARD_NAME "S2Pico"
#define MICROPY_HW_MCU_NAME "ESP32S2-S2FN4R2" // from Wemos MP #define MICROPY_HW_MCU_NAME "ESP32S2-S2FN4R2" // from Wemos MP
#define MICROPY_HW_LED_STATUS (&pin_GPIO10)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) // JST SH Connector Pin 3 NOT STEMMA QT / Feather pinout #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) // JST SH Connector Pin 3 NOT STEMMA QT / Feather pinout
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) // JST SH Connector Pin 2 NOT STEMMA QT / Feather pinout #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) // JST SH Connector Pin 2 NOT STEMMA QT / Feather pinout

4
ports/espressif/boards/microdev_micro_c3/mpconfigboard.h
View File

@ -28,10 +28,12 @@
#define MICROPY_HW_BOARD_NAME "MicroDev microC3" #define MICROPY_HW_BOARD_NAME "MicroDev microC3"
#define MICROPY_HW_MCU_NAME "ESP32-C3FN4" #define MICROPY_HW_MCU_NAME "ESP32-C3FN4"
// Status LED // Status LEDs
#define MICROPY_HW_NEOPIXEL (&pin_GPIO7) #define MICROPY_HW_NEOPIXEL (&pin_GPIO7)
#define MICROPY_HW_NEOPIXEL_COUNT (2) #define MICROPY_HW_NEOPIXEL_COUNT (2)
#define MICROPY_HW_LED_STATUS (&pin_GPIO8)
// Default bus pins // Default bus pins
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO4) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO5) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO5)

11
ports/espressif/boards/microdev_micro_s2/board.c
View File

@ -42,17 +42,6 @@ bool board_requests_safe_mode(void) {
return false; return false;
} }
bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
// Pin 21 is a high side LED so pull it down to prevent lighting the LED.
if (pin_number == 21) {
gpio_reset_pin(21);
gpio_pullup_dis(21);
gpio_pulldown_en(21);
return true;
}
return false;
}
void reset_board(void) { void reset_board(void) {
} }

4
ports/espressif/boards/microdev_micro_s2/mpconfigboard.h
View File

@ -28,9 +28,11 @@
#define MICROPY_HW_BOARD_NAME "MicroDev microS2" #define MICROPY_HW_BOARD_NAME "MicroDev microS2"
#define MICROPY_HW_MCU_NAME "ESP32-S2" #define MICROPY_HW_MCU_NAME "ESP32-S2"
// Status LED // Status LEDs
#define MICROPY_HW_NEOPIXEL (&pin_GPIO33) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
#define MICROPY_HW_LED_STATUS (&pin_GPIO21)
// Default bus pins // Default bus pins
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO1) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO1)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)

2
ports/espressif/boards/odt_pixelwing_esp32_s2/mpconfigboard.h
View File

@ -31,5 +31,7 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO45) #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
#define MICROPY_HW_LED_STATUS (&pin_GPIO21)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO34) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

2
ports/espressif/boards/unexpectedmaker_feathers2/mpconfigboard.h
View File

@ -32,6 +32,8 @@
// #define MICROPY_HW_APA102_MOSI (&pin_GPIO40) // #define MICROPY_HW_APA102_MOSI (&pin_GPIO40)
// #define MICROPY_HW_APA102_SCK (&pin_GPIO45) // #define MICROPY_HW_APA102_SCK (&pin_GPIO45)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

2
ports/espressif/boards/unexpectedmaker_feathers2_neo/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO40) #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

2
ports/espressif/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
View File

@ -32,6 +32,8 @@
// #define MICROPY_HW_APA102_MOSI (&pin_GPIO40) // #define MICROPY_HW_APA102_MOSI (&pin_GPIO40)
// #define MICROPY_HW_APA102_SCK (&pin_GPIO45) // #define MICROPY_HW_APA102_SCK (&pin_GPIO45)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO38) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO38)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

2
ports/espressif/boards/unexpectedmaker_feathers3/mpconfigboard.h
View File

@ -32,6 +32,8 @@
#define MICROPY_HW_NEOPIXEL (&pin_GPIO40) #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39) #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
#define MICROPY_HW_LED_STATUS (&pin_GPIO13)
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

2
ports/espressif/boards/waveshare_esp32s2_pico/mpconfigboard.h
View File

@ -29,4 +29,4 @@
#define MICROPY_HW_BOARD_NAME "Waveshare ESP32-S2-Pico" #define MICROPY_HW_BOARD_NAME "Waveshare ESP32-S2-Pico"
#define MICROPY_HW_MCU_NAME "ESP32S2" #define MICROPY_HW_MCU_NAME "ESP32S2"
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO9) #define MICROPY_HW_LED_STATUS (&pin_GPIO9)

17
ports/espressif/common-hal/microcontroller/Pin.c
View File

@ -130,15 +130,26 @@ STATIC void _reset_pin(gpio_num_t pin_number) {
return; return;
} }
gpio_reset_pin(pin_number); bool pull_down = false;
// Special case the status LED pin.
#if defined(MICROPY_HW_LED_STATUS) && (!defined(MICROPY_HW_LED_STATUS_INVERTED) || !MICROPY_HW_LED_STATUS_INVERTED)
pull_down = pull_down || pin_number == MICROPY_HW_LED_STATUS->number;
#endif
#ifdef DOUBLE_TAP_PIN #ifdef DOUBLE_TAP_PIN
// Pull the double tap pin down so that resets come back to CircuitPython. // Pull the double tap pin down so that resets come back to CircuitPython.
if (pin_number == DOUBLE_TAP_PIN->number) { pull_down = pull_down || pin_number == DOUBLE_TAP_PIN->number;
#endif
// This will pull the pin up. For pins needing pull down it shouldn't be a
// problem for a moment.
gpio_reset_pin(pin_number);
if (pull_down) {
gpio_pullup_dis(pin_number); gpio_pullup_dis(pin_number);
gpio_pulldown_en(pin_number); gpio_pulldown_en(pin_number);
} }
#endif
} }
// Mark pin as free and return it to a quiescent state. // Mark pin as free and return it to a quiescent state.