diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 34e0b08217..adba66314e 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -208,6 +208,7 @@ jobs: - "datum_imu" - "datum_light" - "datum_weather" + - "dynalora_usb" - "dynossat_edu_eps" - "dynossat_edu_obc" - "electronut_labs_blip" diff --git a/WEBUSB_README.md b/WEBUSB_README.md new file mode 100644 index 0000000000..a257d5259c --- /dev/null +++ b/WEBUSB_README.md @@ -0,0 +1,94 @@ + + +# WebUSB Serial Support + +To date, this has only been tested on one port (esp32s2), on one board (espressif_kaluga_1). + +## What it does + +If you have ever used CircuitPython on a platform with a graphical LCD display, you have probably +already seen multiple "consoles" in use (although the LCD console is "output only"). + +New compile-time option CIRCUITPY_USB_VENDOR enables an additional "console" that can be used in +parallel with the original (CDC) serial console. + +Web pages that support the WebUSB standard can connect to the "vendor" interface and activate +this WebUSB serial console at any time. + +You can type into either console, and CircuitPython output is sent to all active consoles. + +One example of a web page you can use to test drive this feature can be found at: + +https://adafruit.github.io/Adafruit_TinyUSB_Arduino/examples/webusb-serial/index.html + +## How to enable + +Update your platform's mpconfigboard.mk file to enable and disable specific types of USB interfaces. + +CIRCUITPY_USB_HID = xxx +CIRCUITPY_USB_MIDI = xxx +CIRCUITPY_USB_VENDOR = xxx + +On at least some of the hardware platforms, the maximum number of USB endpoints is fixed. +For example, on the ESP32S2, you must pick only one of the above 3 interfaces to be enabled. + +Original espressif_kaluga_1 mpconfigboard.mk settings: + +CIRCUITPY_USB_HID = 1 +CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_USB_VENDOR = 0 + +Settings to enable WebUSB instead: + +CIRCUITPY_USB_HID = 0 +CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_USB_VENDOR = 1 + +Notice that to enable VENDOR on ESP32-S2, we had to give up HID. There may be platforms that can have both, or even all three. + +## Implementation Notes + +CircuitPython uses the tinyusb library. + +The tinyusb library already has support for WebUSB serial. +The tinyusb examples already include a "WebUSB serial" example. + + Sidenote - The use of the term "vendor" instead of "WebUSB" was done to match tinyusb. + +Basically, this feature was ported into CircuitPython by pulling code snippets out of the +tinyusb example, and putting them where they best belonged in the CircuitPython codebase. + +There was one complication: + +tinyusb uses C preprocessor macros to define things like USB descriptors. + +CircuitPython uses a Python program (tools/gen_usb_descriptor.py) to create USB descriptors (etc.) +using "helper objects" from another repo (adafruit_usb_descriptor). This means some of the example +code had to be adapted to the new programing model, and gen_usb_descriptor gained new command-line +options to control the generated code. + +The generated files go into the "build" directory, look for autogen_usb_descriptor.c and +genhdr/autogen_usb_descriptor.h. + + +Also worth pointing out - the re-use of the CDC connect/disconnect mechanism is not actually part +of the WebUSB standard, it's more of "common idiom". We make use of it here because we need to know +when we should be paying attention to the WebUSB serial interface, and when we should ignore it.. + +## Possible future work areas + +The current code uses the existing Python infrastructure to create the Interface descriptor, but +simply outputs the code snippets from the original tinyusb demo code to create the WEBUSB_URL, +BOS, and MS_OS_20 descriptors. I suppose additional work could be done to add these to the +adafruit_usb_descriptor project, and then gen_usb_descriptor.py could be modified to make use +of them. + +Program gen_usb_descriptor.py creates objects for most interface types, regardless of whether or +not they are actually enabled. This increases the size of a generated string table. I made the +new vendor-interface-related code not do this (because some of the ARM platforms would no longer +build), but I did not go back and do this for the other interface types (CDC, MIDI, HID, etc.) +Some FLASH savings are probably possible if this is done. diff --git a/docs/index.rst b/docs/index.rst index 6dadddfc1a..3ee76fdd8e 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -46,6 +46,7 @@ Full Table of Contents ../BUILDING ../CODE_OF_CONDUCT ../license.rst + ../WEBUSB_README Indices and tables ================== diff --git a/locale/ID.po b/locale/ID.po index 3e07620698..d2d1cc9ad7 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -642,6 +642,10 @@ msgstr "" "Tidak dapat melakukan reset ke bootloader karena tidak ada bootloader yang " "terisi" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Tidak dapat menetapkan nilai saat arah input." @@ -884,7 +888,7 @@ msgstr "Channel EXTINT sedang digunakan" msgid "Error in regex" msgstr "Error pada regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -943,7 +947,7 @@ msgstr "FFT didefinisikan hanya untuk ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1316,7 +1320,7 @@ msgstr "security_mode tidak valid" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1324,10 +1328,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Suara tidak valid" @@ -1344,10 +1344,6 @@ msgstr "File wave tidak valid" msgid "Invalid word/bit length" msgstr "Panjang kata/bit tidak valid" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Panjang kunci harus 16, 24, atau 32 byte" @@ -1560,6 +1556,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Tidak ada pull-down pada pin; 1Mohm direkomendasikan" @@ -1674,7 +1676,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1825,6 +1827,10 @@ msgstr "Kesalahan DeInit RNG" msgid "RNG Init Error" msgstr "Kesalahan Init RNG" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1832,6 +1838,7 @@ msgstr "Pembalikan RS485 ditentukan saat tidak dalam mode RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Kalibrasi RTC tidak didukung pada board ini" @@ -1840,7 +1847,7 @@ msgid "RTC is not supported on this board" msgstr "RTC tidak didukung di board ini" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Belum didukung pada perangkat ini" @@ -1898,12 +1905,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA atau SCL membutuhkan pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2203,7 +2204,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Tipe urf nrfx tak sesuai" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2512,7 +2513,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3673,6 +3674,10 @@ msgstr "Muncul dari PulseIn yang kosong" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" @@ -4202,6 +4207,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA atau SCL membutuhkan pull up" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "pin alamat %d dan pin rgb %d menunjukkan tinggi %d, bukan %d" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 0fd758e978..035941ff53 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -629,6 +629,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -865,7 +869,7 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -924,7 +928,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1295,7 +1299,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1303,10 +1307,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1323,10 +1323,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1539,6 +1535,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1647,7 +1649,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1870,12 +1872,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2167,7 +2163,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2466,7 +2462,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3626,6 +3622,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index e6ad0a83f7..b71c491c39 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -632,6 +632,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -868,7 +872,7 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -927,7 +931,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1298,7 +1302,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1306,10 +1310,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1326,10 +1326,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1542,6 +1538,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1650,7 +1652,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1796,6 +1798,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1803,6 +1809,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1811,7 +1818,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1868,12 +1875,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2165,7 +2166,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2464,7 +2465,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3624,6 +3625,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index e23f27bfe3..caaa28cedd 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -6,14 +6,14 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-07 18:01+0000\n" -"Last-Translator: Dennis Schweer \n" +"PO-Revision-Date: 2021-02-05 15:41+0000\n" +"Last-Translator: Jeff Epler \n" "Language: de_DE\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -120,7 +120,8 @@ msgstr "%q sollte ein integer sein" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" -msgstr "%q() nimmt %d Argumente ohne Keyword an, aber es wurden %d angegeben" +msgstr "" +"%q() nimmt %d Argumente ohne Schlüsselwort an, aber es wurden %d angegeben" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format @@ -235,7 +236,7 @@ msgstr "'await' außerhalb einer Funktion" #: py/compile.c msgid "'await', 'async for' or 'async with' outside async function" -msgstr "" +msgstr "'await', 'async for' oder 'async with' außerhalb einer async Funktion" #: py/compile.c msgid "'break' outside loop" @@ -267,7 +268,7 @@ msgstr "'return' außerhalb einer Funktion" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' innerhalb einer async Funktion" #: py/compile.c msgid "'yield' outside function" @@ -313,7 +314,7 @@ msgstr "Adresstyp außerhalb des zulässigen Bereichs" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "Alle CAN Schnittstellen sind in Benutzung" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -329,7 +330,7 @@ msgstr "Alle PCNT Einheiten sind in Benutzung" #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" -msgstr "" +msgstr "Alle RX FIFOs sind in Benutzung" #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" @@ -541,7 +542,7 @@ msgstr "Puffer zu groß und kann nicht reserviert werden" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" -msgstr "Buffer um %d Bytes zu kurz" +msgstr "Puffer um %d Bytes zu kurz" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/esp32s2/common-hal/displayio/ParallelBus.c @@ -638,6 +639,10 @@ msgstr "Kann '/' nicht remounten when USB aktiv ist." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Reset zum bootloader nicht möglich da bootloader nicht vorhanden." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Der Wert kann nicht gesetzt werden, wenn die Richtung input ist." @@ -691,7 +696,7 @@ msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython was unable to allocate the heap.\n" -msgstr "" +msgstr "CircuitPython war es nicht möglich heap-Speicher zu allozieren.\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." @@ -769,7 +774,7 @@ msgstr "PWM konnte nicht neu gestartet werden" #: ports/esp32s2/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" -msgstr "" +msgstr "Clock konnte nicht ermittelt werden" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" @@ -807,7 +812,7 @@ msgstr "Absturz in den HardFault_Handler." #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" -msgstr "DAC Kanal Intialisierungs Fehler" +msgstr "DAC Kanal Initialisierungsfehler" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" @@ -880,7 +885,7 @@ msgstr "EXTINT Kanal ist schon in Benutzung" msgid "Error in regex" msgstr "Fehler in regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -940,7 +945,7 @@ msgstr "FFT ist nur für ndarrays definiert" msgid "FFT is implemented for linear arrays only" msgstr "FFT ist nur für lineare Arrays implementiert" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "SSL Handshake fehlgeschlagen" @@ -973,7 +978,7 @@ msgstr "Zuweisung des Wifi Speichers ist fehlgeschlagen" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" -msgstr "" +msgstr "Zuweisung des Wifi Scan Speichers ist fehlgeschlagen" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" @@ -989,7 +994,7 @@ msgstr "Wifi Initialisierung ist fehlgeschlagen" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" -msgstr "Parsen der MP3 Datei fehlgeschlagen" +msgstr "MP3-Datei konnte nicht analysiert werden" #: ports/nrf/sd_mutex.c #, c-format @@ -1012,7 +1017,7 @@ msgstr "Filter zu komplex" #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" -msgstr "" +msgstr "Firmware Image ist ungültig" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" @@ -1315,7 +1320,7 @@ msgstr "Ungültiger security_mode" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1323,10 +1328,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ungültige Stimme" @@ -1343,10 +1344,6 @@ msgstr "Ungültige wave Datei" msgid "Invalid word/bit length" msgstr "Ungültige Wort- / Bitlänge" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Der Schlüssel muss 16, 24 oder 32 Byte lang sein" @@ -1561,6 +1558,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen" @@ -1675,7 +1678,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1824,6 +1827,10 @@ msgstr "RNG DeInit-Fehler" msgid "RNG Init Error" msgstr "RNG Init Fehler" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1831,6 +1838,7 @@ msgstr "RS485-Inversion angegeben, wenn nicht im RS485-Modus" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Die RTC-Kalibrierung wird auf diesem Board nicht unterstützt" @@ -1839,7 +1847,7 @@ msgid "RTC is not supported on this board" msgstr "Eine RTC wird auf diesem Board nicht unterstützt" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS / CTS / RS485 Wird von diesem Gerät noch nicht unterstützt" @@ -1896,12 +1904,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA oder SCL brauchen pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2207,7 +2209,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Unerwarteter nrfx uuid-Typ" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2521,7 +2523,7 @@ msgstr "Puffersegmente müssen gleich lang sein" msgid "buffer too small" msgstr "Der Puffer ist zu klein" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -2902,7 +2904,7 @@ msgstr "erwarte tuple/list" #: py/modthread.c msgid "expecting a dict for keyword args" -msgstr "erwarte ein dict als Keyword-Argumente" +msgstr "erwarte ein dict als Schlüsselwort-Argumente" #: py/compile.c msgid "expecting an assembler instruction" @@ -2922,11 +2924,11 @@ msgstr "" #: py/argcheck.c msgid "extra keyword arguments given" -msgstr "Es wurden zusätzliche Keyword-Argumente angegeben" +msgstr "Es wurden zusätzliche Schlüsselwort-Argumente angegeben" #: py/argcheck.c msgid "extra positional arguments given" -msgstr "Es wurden zusätzliche Argumente ohne Keyword angegeben" +msgstr "Es wurden zusätzliche Argumente ohne Schlüsselwort angegeben" #: py/parse.c msgid "f-string expression part cannot include a '#'" @@ -3007,7 +3009,7 @@ msgstr "voll" #: py/argcheck.c msgid "function does not take keyword arguments" -msgstr "Funktion akzeptiert keine Keyword-Argumente" +msgstr "Funktion akzeptiert keine Schlüsselwort-Argumente" #: py/argcheck.c #, c-format @@ -3029,26 +3031,27 @@ msgstr "" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" -msgstr "Funktion vermisst %d benötigte Argumente ohne Keyword" +msgstr "Funktion vermisst %d benötigte Argumente ohne Schlüsselwort" #: py/bc.c msgid "function missing keyword-only argument" -msgstr "Funktion vermisst Keyword-only-Argument" +msgstr "Funktion vermisst Nur-Schlüsselwort-Argument" #: py/bc.c msgid "function missing required keyword argument '%q'" -msgstr "Funktion vermisst benötigtes Keyword-Argumente '%q'" +msgstr "Funktion vermisst benötigtes Schlüsselwort-Argumente '%q'" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" -msgstr "Funktion vermisst benötigtes Argumente ohne Keyword #%d" +msgstr "Funktion vermisst benötigtes Argumente ohne Schlüsselwort #%d" #: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "" -"Funktion nimmt %d Argumente ohne Keyword an, aber es wurden %d angegeben" +"Funktion nimmt %d Argumente ohne Schlüsselwort an, aber es wurden %d " +"angegeben" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" @@ -3278,8 +3281,8 @@ msgstr "" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "" -"Keyword-Argument(e) noch nicht implementiert - verwenden Sie stattdessen " -"normale Argumente" +"Schlüsselwort-Argument(e) noch nicht implementiert - verwenden Sie " +"stattdessen normale Argumente" #: py/bc.c msgid "keywords must be strings" @@ -3704,6 +3707,10 @@ msgstr "pop von einem leeren PulseIn" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() drittes Argument darf nicht 0 sein" @@ -4069,11 +4076,11 @@ msgstr "" #: py/bc.c msgid "unexpected keyword argument" -msgstr "unerwartetes Keyword-Argument" +msgstr "unerwartetes Schlüsselwort-Argument" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" -msgstr "unerwartetes Keyword-Argument '%q'" +msgstr "unerwartetes Schlüsselwort-Argument '%q'" #: py/lexer.c msgid "unicode name escapes" @@ -4239,6 +4246,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA oder SCL brauchen pull up" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d Adress-Pins und %d rgb-Pins zeigen eine Höhe von %d, nicht von %d" diff --git a/locale/el.po b/locale/el.po index 0c7cb5f6bb..bf03a5d825 100644 --- a/locale/el.po +++ b/locale/el.po @@ -629,6 +629,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -865,7 +869,7 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -924,7 +928,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1295,7 +1299,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1303,10 +1307,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1323,10 +1323,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1539,6 +1535,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1647,7 +1649,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1793,6 +1795,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1800,6 +1806,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1808,7 +1815,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1865,12 +1872,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2162,7 +2163,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2461,7 +2462,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3621,6 +3622,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" diff --git a/locale/es.po b/locale/es.po index b446ceb484..fbde0ce37c 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,27 +8,31 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-12-30 22:25+0000\n" -"Last-Translator: Hugo Dahl \n" +"PO-Revision-Date: 2021-02-08 21:21+0000\n" +"Last-Translator: Alvaro Figueroa \n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" "\n" "Code done running.\n" msgstr "" +"\n" +"El código terminó de ejecutar.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload.\n" msgstr "" +"\n" +"El código fue detenido por el auto-reiniciado.\n" #: supervisor/shared/safe_mode.c msgid "" @@ -50,7 +54,7 @@ msgstr " Archivo \"%q\", línea %d" #: py/builtinhelp.c msgid " is of type %q\n" -msgstr "" +msgstr " es de tipo %q\n" #: main.c msgid " output:\n" @@ -126,7 +130,7 @@ msgstr "%q() toma %d argumentos posicionales pero %d fueron dados" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format msgid "%s error 0x%x" -msgstr "" +msgstr "%s error 0x%x" #: py/argcheck.c msgid "'%q' argument required" @@ -292,7 +296,7 @@ msgstr "pow() con 3 argumentos no soportado" #: shared-module/msgpack/__init__.c msgid "64 bit types" -msgstr "" +msgstr "tipos de 64 bit" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c @@ -346,7 +350,7 @@ msgstr "Todos los canales de eventos estan siendo usados" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "All state machines in use" -msgstr "" +msgstr "Todas las máquinas de estado en uso" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" @@ -567,7 +571,7 @@ msgstr "Los bloques CBC deben ser múltiplos de 16 bytes" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "CRC or checksum was invalid" -msgstr "" +msgstr "CRC o suma de comprobación inválida" #: py/objtype.c msgid "Call super().__init__() before accessing native object." @@ -642,6 +646,10 @@ msgstr "No se puede volver a montar '/' cuando el USB esta activo." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "No se puede reiniciar a bootloader porque no hay bootloader presente." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "No se pueden definir opciones para enchufe" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "No se puede asignar un valor cuando la dirección es input." @@ -882,7 +890,7 @@ msgstr "El canal EXTINT ya está siendo utilizado" msgid "Error in regex" msgstr "Error en regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -941,7 +949,7 @@ msgstr "FFT se define solo para ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "FFT solo esta implementado para arrays lineales" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Fallo en saludo SSL" @@ -1013,7 +1021,7 @@ msgstr "Filtros muy complejos" #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" -msgstr "" +msgstr "La imagen de firmware es inválida" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" @@ -1036,7 +1044,7 @@ msgstr "La función requiere lock" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Generic Failure" -msgstr "" +msgstr "Fallo Genérico" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c @@ -1072,7 +1080,7 @@ msgstr "I2C Error de inicio" #: ports/raspberrypi/common-hal/busio/I2C.c msgid "I2C peripheral in use" -msgstr "" +msgstr "Dispositivo I2C en uso" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" @@ -1315,7 +1323,7 @@ msgstr "'security_mode' no válido" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1323,10 +1331,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Voz inválida" @@ -1343,10 +1347,6 @@ msgstr "Archivo wave inválido" msgid "Invalid word/bit length" msgstr "Tamaño no válido de palabra/bit" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "La llave debe tener 16, 24 o 32 bytes de longitud" @@ -1559,6 +1559,12 @@ msgstr "No hay una red con ese ssid" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "No hay pulldown en el pin; 1Mohm recomendado" @@ -1673,7 +1679,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Se acabaron los enchufes" @@ -1828,6 +1834,10 @@ msgstr "Error de desinicialización de RNG" msgid "RNG Init Error" msgstr "Error de inicialización de RNG" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1835,6 +1845,7 @@ msgstr "Se especifica inversión de RS485 si no está en modo RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Calibración de RTC no es soportada en esta placa" @@ -1843,7 +1854,7 @@ msgid "RTC is not supported on this board" msgstr "RTC no soportado en esta placa" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "Sin capacidad de RTS/CTS/RS485 para este dispositivo" @@ -1900,12 +1911,6 @@ msgstr "¡Corriendo en modo seguro! " msgid "SD card CSD format not supported" msgstr "Sin capacidad para formato CSD para tarjeta SD" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA o SCL necesitan una pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2211,7 +2216,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Tipo de uuid nrfx inesperado" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Error no manejado de ESP TLS %d %d %x %d" @@ -2521,7 +2526,7 @@ msgstr "Las secciones del buffer necesitan tener longitud igual" msgid "buffer too small" msgstr "buffer demasiado pequeño" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "búfer muy pequeño para los bytes solicitados" @@ -3694,6 +3699,10 @@ msgstr "pop de un PulseIn vacío" msgid "pop from empty %q" msgstr "pop desde %q vacía" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "el 3er argumento de pow() no puede ser 0" @@ -4225,6 +4234,9 @@ msgstr "zi debe ser de tipo flotante" msgid "zi must be of shape (n_section, 2)" msgstr "zi debe ser una forma (n_section,2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA o SCL necesitan una pull up" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d pines de dirección y %d pines rgb indican una altura de %d, no de %d" diff --git a/locale/fil.po b/locale/fil.po index bba9761ad9..b030bd5c89 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -636,6 +636,10 @@ msgstr "Hindi ma-remount '/' kapag aktibo ang USB." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Hindi ma-reset sa bootloader dahil walang bootloader." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Hindi ma i-set ang value kapag ang direksyon ay input." @@ -876,7 +880,7 @@ msgstr "Ginagamit na ang EXTINT channel" msgid "Error in regex" msgstr "May pagkakamali sa REGEX" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -937,7 +941,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1310,7 +1314,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1318,10 +1322,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1338,10 +1338,6 @@ msgstr "May hindi tama sa wave file" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1554,6 +1550,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1665,7 +1667,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1812,6 +1814,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1819,6 +1825,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibration ay hindi supportado ng board na ito" @@ -1827,7 +1834,7 @@ msgid "RTC is not supported on this board" msgstr "Hindi supportado ang RTC sa board na ito" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1885,12 +1892,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "Kailangan ng pull up resistors ang SDA o SCL" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2183,7 +2184,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "hindi inaasahang indent" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2492,7 +2493,7 @@ msgstr "aarehas na haba dapat ang buffer slices" msgid "buffer too small" msgstr "masyadong maliit ang buffer" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3670,6 +3671,10 @@ msgstr "pop mula sa walang laman na PulseIn" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3rd argument ay hindi maaring 0" @@ -4204,6 +4209,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "Kailangan ng pull up resistors ang SDA o SCL" + #~ msgid "tuple index out of range" #~ msgstr "indeks ng tuple wala sa sakop" diff --git a/locale/fr.po b/locale/fr.po index 83af1f9f7c..ed7c124868 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -654,6 +654,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Ne peut être redémarré vers le bootloader car il n'y a pas de bootloader." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -897,7 +901,7 @@ msgstr "Canal EXTINT déjà utilisé" msgid "Error in regex" msgstr "Erreur dans l'expression régulière" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "Erreur : Impossible de lier" @@ -957,7 +961,7 @@ msgstr "La FFT est définie uniquement pour les ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "FFT n'est implémenté que pour les tableaux linéaires" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Échec du handshake SSL" @@ -1332,7 +1336,7 @@ msgstr "'security_mode' invalide" msgid "Invalid size" msgstr "Taille invalide" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "Socket non valide pour TLS" @@ -1340,10 +1344,6 @@ msgstr "Socket non valide pour TLS" msgid "Invalid state" msgstr "État invalide" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "Utilisation incorrecte de socket TLS" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Voix invalide" @@ -1360,10 +1360,6 @@ msgstr "Fichier WAVE invalide" msgid "Invalid word/bit length" msgstr "Longueur de mot / bit invalide" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "Problème en activant SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "La clé doit comporter 16, 24 ou 32 octets" @@ -1576,6 +1572,12 @@ msgstr "Aucun réseau avec ce ssid" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Pas de pulldown sur la broche ; 1Mohm recommandé" @@ -1690,7 +1692,7 @@ msgstr "Timeout de l'opération" msgid "Out of memory" msgstr "Hors de mémoire" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Plus de sockets" @@ -1850,6 +1852,10 @@ msgstr "Erreur de désinitiation du RNG (RNG DeInit)" msgid "RNG Init Error" msgstr "Erreur d'initialisation du RNG (RNG Init)" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1857,6 +1863,7 @@ msgstr "Inversion RS485 spécifiée sans être en mode RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "La calibration du RTC non supportée sur cette carte" @@ -1865,7 +1872,7 @@ msgid "RTC is not supported on this board" msgstr "RTC non supporté sur cette carte" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS / CTS / RS485 Pas encore supporté sur cet appareil" @@ -1922,12 +1929,6 @@ msgstr "Exécution en mode sécurisé! " msgid "SD card CSD format not supported" msgstr "Le format de carte SD CSD n'est pas supporté" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2234,7 +2235,7 @@ msgstr "Écriture impossible vers sleep_memory." msgid "Unexpected nrfx uuid type" msgstr "Type inattendu pour l'uuid nrfx" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Erreur ESP TLS non gérée %d %d %x %d" @@ -2546,7 +2547,7 @@ msgstr "les tranches de tampon doivent être de longueurs égales" msgid "buffer too small" msgstr "tampon trop petit" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "tampon trop petit pour le nombre d'octets demandé" @@ -3731,6 +3732,10 @@ msgstr "'pop' d'une entrée PulseIn vide" msgid "pop from empty %q" msgstr "pop sur %q vide" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "le 3e argument de pow() ne peut être 0" @@ -4262,6 +4267,15 @@ msgstr "zi doit être de type float" msgid "zi must be of shape (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "Utilisation incorrecte de socket TLS" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "Problème en activant SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "Les broches d'adresse %d et les broches RVB %d indiquent une hauteur de " diff --git a/locale/hi.po b/locale/hi.po index 5150d164e1..fa57c47e52 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -629,6 +629,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -865,7 +869,7 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -924,7 +928,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1295,7 +1299,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1303,10 +1307,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1323,10 +1323,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1539,6 +1535,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1647,7 +1649,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1793,6 +1795,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1800,6 +1806,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1808,7 +1815,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1865,12 +1872,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2162,7 +2163,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2461,7 +2462,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3621,6 +3622,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index cecfe11298..561f9fb08e 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -637,6 +637,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Impossibile resettare nel bootloader poiché nessun bootloader è presente." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "non si può impostare un valore quando direzione è input" @@ -876,7 +880,7 @@ msgstr "Canale EXTINT già in uso" msgid "Error in regex" msgstr "Errore nella regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -937,7 +941,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1312,7 +1316,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1320,10 +1324,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1341,10 +1341,6 @@ msgstr "File wave non valido" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1558,6 +1554,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1670,7 +1672,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1822,6 +1824,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1829,6 +1835,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "calibrazione RTC non supportata su questa scheda" @@ -1837,7 +1844,7 @@ msgid "RTC is not supported on this board" msgstr "RTC non supportato su questa scheda" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1895,12 +1902,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA o SCL necessitano un pull-up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2195,7 +2196,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "indentazione inaspettata" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2498,7 +2499,7 @@ msgstr "slice del buffer devono essere della stessa lunghezza" msgid "buffer too small" msgstr "buffer troppo piccolo" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3678,6 +3679,10 @@ msgstr "pop sun un PulseIn vuoto" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "il terzo argomento di pow() non può essere 0" @@ -4212,6 +4217,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA o SCL necessitano un pull-up" + #~ msgid "tuple index out of range" #~ msgstr "indice della tupla fuori intervallo" diff --git a/locale/ja.po b/locale/ja.po index c139ec3cc8..c58264a7dd 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -638,6 +638,10 @@ msgstr "USBがアクティブの時に'/'を再マウントできません" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "ブートローダが存在しないためブートローダへとリセットできません" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "方向がinputのときは値を設定できません" @@ -876,7 +880,7 @@ msgstr "EXTINTチャネルはすでに使用されています" msgid "Error in regex" msgstr "正規表現にエラーがあります" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -935,7 +939,7 @@ msgstr "FFTはndarrayでのみ使えます" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1308,7 +1312,7 @@ msgstr "不正なsecurity_mode" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1316,10 +1320,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "不正なボイス" @@ -1336,10 +1336,6 @@ msgstr "不正なwaveファイル" msgid "Invalid word/bit length" msgstr "不正なワード/ビット長" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Keyの長さは、16, 24, 32バイトのいずれかでなければなりません" @@ -1552,6 +1548,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "ピンにプルダウンがありません。1Mオーム推奨" @@ -1662,7 +1664,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1809,6 +1811,10 @@ msgstr "RNG解体エラー" msgid "RNG Init Error" msgstr "乱数生成器の初期化エラー" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1816,6 +1822,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "このボードはRTCのキャリブレーションに非対応" @@ -1824,7 +1831,7 @@ msgid "RTC is not supported on this board" msgstr "このボードはRTCに対応していません" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485はこのデバイスでは未対応" @@ -1881,12 +1888,6 @@ msgstr "セーフモードで実行中！ " msgid "SD card CSD format not supported" msgstr "SDカードのCSDフォーマットは非対応" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDAとSCLにプルアップが必要" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2185,7 +2186,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "想定されていないnrfx UUID型" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2484,7 +2485,7 @@ msgstr "バッファのスライスは同じ長さでなければなりません msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3651,6 +3652,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow()の3つ目の引数は0にできません" @@ -4180,6 +4185,9 @@ msgstr "ziはfloat値でなければなりません" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDAとSCLにプルアップが必要" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/ko.po b/locale/ko.po index 54e57f191f..ff1217f1ca 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -632,6 +632,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -868,7 +872,7 @@ msgstr "" msgid "Error in regex" msgstr "Regex에 오류가 있습니다." -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -927,7 +931,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1298,7 +1302,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1306,10 +1310,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1326,10 +1326,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1542,6 +1538,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1650,7 +1652,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1796,6 +1798,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1803,6 +1809,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1811,7 +1818,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1868,12 +1875,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2166,7 +2167,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2465,7 +2466,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3625,6 +3626,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index de9aed9e7d..451241ba54 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -636,6 +636,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Kan niet resetten naar bootloader omdat er geen bootloader aanwezig is." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Kan de waarde niet toewijzen als de richting input is." @@ -876,7 +880,7 @@ msgstr "EXTINT kanaal al in gebruik" msgid "Error in regex" msgstr "Fout in regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -935,7 +939,7 @@ msgstr "FFT alleen voor ndarrays gedefineerd" msgid "FFT is implemented for linear arrays only" msgstr "FFT is alleen geïmplementeerd voor lineaire arrays" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "SSL handdruk mislukt" @@ -1309,7 +1313,7 @@ msgstr "Ongeldige security_mode" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1317,10 +1321,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ongeldige stem" @@ -1337,10 +1337,6 @@ msgstr "Ongeldig wave bestand" msgid "Invalid word/bit length" msgstr "Ongeldig woord/bit lengte" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Sleutel moet 16, 24, of 32 bytes lang zijn" @@ -1553,6 +1549,12 @@ msgstr "Geen netwerk met dat SSID gevonden" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Geen pulldown op pin; 1MOhm aangeraden" @@ -1667,7 +1669,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Geen sockets meer beschikbaar" @@ -1825,6 +1827,10 @@ msgstr "RNG DeInit Fout" msgid "RNG Init Error" msgstr "RNG Init Fout" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1832,6 +1838,7 @@ msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibratie niet ondersteund door dit board" @@ -1840,7 +1847,7 @@ msgid "RTC is not supported on this board" msgstr "RTC is niet ondersteund door dit board" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Nog niet ondersteund door dit apparaat" @@ -1897,12 +1904,6 @@ msgstr "Veilige modus wordt uitgevoerd! " msgid "SD card CSD format not supported" msgstr "SD kaart CSD formaat niet ondersteund" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA of SCL hebben een pullup nodig" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2204,7 +2205,7 @@ msgstr "Kan niet naar sleep_memory schrijven." msgid "Unexpected nrfx uuid type" msgstr "Onverwacht mrfx uuid type" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Niet behandelde ESP TLS fout %d %d %x %d" @@ -2514,7 +2515,7 @@ msgstr "buffer slices moeten van gelijke grootte zijn" msgid "buffer too small" msgstr "buffer te klein" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "buffer te klein voor gevraagde bytes" @@ -3683,6 +3684,10 @@ msgstr "pop van een lege PulseIn" msgid "pop from empty %q" msgstr "pop van een lege %q" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "derde argument van pow() mag geen 0 zijn" @@ -4213,6 +4218,9 @@ msgstr "zi moet van type float zijn" msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA of SCL hebben een pullup nodig" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "%d adres pins en %d RGB pins geven een hoogte van %d aan, niet %d" diff --git a/locale/pl.po b/locale/pl.po index e9a794cac8..c9fd04c385 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-27 01:31+0000\n" +"PO-Revision-Date: 2021-02-10 21:50+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" @@ -636,6 +636,10 @@ msgstr "Nie można przemontować '/' gdy USB działa." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Nie można zrestartować -- nie ma bootloadera." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Nie można ustawić wartości w trybie wejścia." @@ -876,7 +880,7 @@ msgstr "Kanał EXTINT w użyciu" msgid "Error in regex" msgstr "Błąd w regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -935,7 +939,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1308,7 +1312,7 @@ msgstr "Nieprawidłowy security_mode" msgid "Invalid size" msgstr "Nieprawidłowy rozmiar" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1316,10 +1320,6 @@ msgstr "" msgid "Invalid state" msgstr "Nieprawidłowy stan" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1336,10 +1336,6 @@ msgstr "Zły plik wave" msgid "Invalid word/bit length" msgstr "Niepoprawna długość słowa/bitu" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Klucz musi mieć długość 16, 24 lub 32 bajtów" @@ -1553,6 +1549,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1661,7 +1663,7 @@ msgstr "" msgid "Out of memory" msgstr "Brak pamięci" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1807,6 +1809,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1814,6 +1820,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Brak obsługi kalibracji RTC" @@ -1822,7 +1829,7 @@ msgid "RTC is not supported on this board" msgstr "Brak obsługi RTC" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1879,12 +1886,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA lub SCL wymagają podciągnięcia" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2176,7 +2177,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Nieoczekiwany typ nrfx uuid" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2481,7 +2482,7 @@ msgstr "fragmenty bufora muszą mieć tę samą długość" msgid "buffer too small" msgstr "zbyt mały bufor" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3643,6 +3644,10 @@ msgstr "pop z pustego PulseIn" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "trzeci argument pow() nie może być 0" @@ -4102,7 +4107,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "" +msgstr "szerokość musi być większa niż zero" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "wifi is not enabled" @@ -4122,7 +4127,7 @@ msgstr "" #: extmod/ulab/code/vector/vectorise.c msgid "wrong input type" -msgstr "" +msgstr "nieprawidłowy typ wejścia" #: extmod/ulab/code/ulab_create.c py/objstr.c msgid "wrong number of arguments" @@ -4138,7 +4143,7 @@ msgstr "zły typ operandu" #: extmod/ulab/code/vector/vectorise.c msgid "wrong output type" -msgstr "" +msgstr "nieprawidłowy typ wyjścia" #: shared-module/displayio/Shape.c msgid "x value out of bounds" @@ -4172,6 +4177,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA lub SCL wymagają podciągnięcia" + #~ msgid "tuple index out of range" #~ msgstr "indeks krotki poza zakresem" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 2b9f9afa2e..04fbb64cc5 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-02-01 17:50+0000\n" +"PO-Revision-Date: 2021-02-09 14:03+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -654,6 +654,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Não é possível redefinir para o bootloader porque o mesmo não está presente." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "Não foi possível definir as opções do socket" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Não é possível definir o valor quando a direção é inserida." @@ -894,7 +898,7 @@ msgstr "Canal EXTINT em uso" msgid "Error in regex" msgstr "Erro no regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "Erro: Falha na vinculação" @@ -953,7 +957,7 @@ msgstr "O FFT é definido apenas para ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "O FFT é implementado apenas para matrizes lineares" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Houve uma falha no handshake do SSL" @@ -1327,7 +1331,7 @@ msgstr "O Security_mode é inválido" msgid "Invalid size" msgstr "Tamanho inválido" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "Soquete inválido para o TLS" @@ -1335,10 +1339,6 @@ msgstr "Soquete inválido para o TLS" msgid "Invalid state" msgstr "Estado inválido" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "Uso inválido do soquete TLS" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "A voz é inválida" @@ -1355,10 +1355,6 @@ msgstr "Aqruivo de ondas inválido" msgid "Invalid word/bit length" msgstr "O comprimento do bit/palavra são inválidos" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "Problema na configuração do SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "A chave deve ter 16, 24 ou 32 bytes de comprimento" @@ -1571,6 +1567,14 @@ msgstr "Não há rede com este ssid" msgid "No out in program" msgstr "Sem saída no programa" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" +"Nenhum pull up foi encontrado no SDA ou no SCL; verifique o fio das suas " +"conexões" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Não há pulldown no pino; É recomendável utilizar um resistor de 1M ohm" @@ -1684,7 +1688,7 @@ msgstr "A operação expirou" msgid "Out of memory" msgstr "Sem memória" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Sem soquetes" @@ -1846,6 +1850,10 @@ msgstr "Erro DeInit RNG" msgid "RNG Init Error" msgstr "Houve um erro na inicialização do RNG" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "Ainda não há suporte para o RS485 neste dispositivo" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1853,6 +1861,7 @@ msgstr "A definição da inversão do RS485 quando não está no modo RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "A calibração RTC não é suportada nesta placa" @@ -1861,7 +1870,7 @@ msgid "RTC is not supported on this board" msgstr "O RTC não é suportado nesta placa" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Ainda não é compatível neste dispositivo" @@ -1918,12 +1927,6 @@ msgstr "Executando no modo de segurança! " msgid "SD card CSD format not supported" msgstr "O formato CSD do Cartão SD não é compatível" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA ou SCL precisa de um pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -2230,7 +2233,7 @@ msgstr "Não foi possível escrever no sleep_memory." msgid "Unexpected nrfx uuid type" msgstr "Tipo uuid nrfx inesperado" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Erro não tratado do ESP TLS %d %d %x %d" @@ -2541,7 +2544,7 @@ msgstr "as fatias do buffer devem ter o mesmo comprimento" msgid "buffer too small" msgstr "o buffer é muito pequeno" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "o buffer é pequeno demais para os bytes requisitados" @@ -3721,6 +3724,10 @@ msgstr "pop a partir de um PulseIn vazio" msgid "pop from empty %q" msgstr "pop a partir do %q vazio" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "a porta deve ser > = 0" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "O terceiro argumento pow() não pode ser 0" @@ -4251,6 +4258,15 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA ou SCL precisa de um pull up" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "Uso inválido do soquete TLS" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "Problema na configuração do SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d endereços dos pinos e %d pinos rgb indicam uma altura do %d, não %d" diff --git a/locale/sv.po b/locale/sv.po index c4c51fcc00..e9eb91b056 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-25 19:32+0000\n" +"PO-Revision-Date: 2021-02-05 19:47+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -68,6 +68,7 @@ msgstr "%%c kräver int eller char" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d adresspinnar, %d rgb-stift och %d brickor anger en höjd på %d, inte %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -348,7 +349,7 @@ msgstr "Alla händelsekanaler används" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "All state machines in use" -msgstr "" +msgstr "Alla tillståndsmaskiner används" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" @@ -641,6 +642,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Det går inte att återställa till bootloader eftersom bootloader saknas." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "Det går inte att ange socketalternativ" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Kan inte sätta värde när riktning är input." @@ -825,7 +830,7 @@ msgstr "Datapinne 0 måste vara bytejusterad" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "Datapinne 0 måste vara byte-justerad." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -881,7 +886,7 @@ msgstr "EXTINT-kanalen används redan" msgid "Error in regex" msgstr "Fel i regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "Fel: Bind misslyckades" @@ -940,7 +945,7 @@ msgstr "FFT är enbart definierade för ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "FTT är enbart implementerad för linjära matriser" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Misslyckad SSL-handskakning" @@ -1070,7 +1075,7 @@ msgstr "I2C init-fel" #: ports/raspberrypi/common-hal/busio/I2C.c msgid "I2C peripheral in use" -msgstr "" +msgstr "I2C-enhet används redan" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" @@ -1099,7 +1104,7 @@ msgstr "Fel buffertstorlek" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Init program size invalid" -msgstr "" +msgstr "Storlek på init-program ogiltigt" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" @@ -1116,27 +1121,27 @@ msgstr "Indata-/utdatafel" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d jumps on pin" -msgstr "" +msgstr "Instruktion %d hoppar på pinne" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts in more bits than pin count" -msgstr "" +msgstr "Instruktion %d skiftar fler bitar än antalet pinnar" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts out more bits than pin count" -msgstr "" +msgstr "Instruktion %d skiftar fler bitar än antal pinnar" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d uses extra pin" -msgstr "" +msgstr "Instruktion %d använder extra pinne" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d waits on input outside of count" -msgstr "" +msgstr "Instruktion %d väntar på inmatning utanför intervallet" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" @@ -1313,7 +1318,7 @@ msgstr "Ogiltigt säkerhetsläge" msgid "Invalid size" msgstr "Ogiltig storlek" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "Ogiltig socket för TLS" @@ -1321,10 +1326,6 @@ msgstr "Ogiltig socket för TLS" msgid "Invalid state" msgstr "Ogiltigt tillstånd" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "Ogiltig användning av TLS Socket" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ogiltig kanal" @@ -1341,10 +1342,6 @@ msgstr "Ogiltig wave-fil" msgid "Invalid word/bit length" msgstr "Ogiltig word-/bitlängd" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "Misslyckades att sätta SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Nyckeln måste vara 16, 24 eller 32 byte lång" @@ -1410,32 +1407,32 @@ msgstr "MISO- eller MOSI-pinne saknas" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d reads pin(s)" -msgstr "" +msgstr "Saknad first_in_pin. Instruktion %d läser pinnar" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" -msgstr "" +msgstr "Saknad first_in_pin. Instruktion %d skiftar in från pinnar" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d waits based on pin" -msgstr "" +msgstr "Saknad first_in_pin. Instruktion %d väntar baserat på pinne" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" -msgstr "" +msgstr "Saknad first_out_pin. Instruktion %d skiftar ut till pinnar" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d writes pin(s)" -msgstr "" +msgstr "Saknad first_out_pin. Instruktion %d skriver till pinnar" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_set_pin. Instruction %d sets pin(s)" -msgstr "" +msgstr "Saknad first_set_pin. Instruktion %d sätter pinnar" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." @@ -1556,7 +1553,13 @@ msgstr "Inget nätverk med sådant ssid" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No out in program" -msgstr "" +msgstr "Inget out i programmet" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "Ingen pull-up hittades på SDA eller SCL; kontrollera inkopplingen" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" @@ -1617,7 +1620,7 @@ msgstr "Endast 8 eller 16 bitars mono med " #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Only IN/OUT of up to 8 supported" -msgstr "" +msgstr "Endast IN/OUT på upp till 8 stöds" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" @@ -1671,7 +1674,7 @@ msgstr "Åtgärden orsakade timeout" msgid "Out of memory" msgstr "Slut på minne" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Slut på sockets" @@ -1711,11 +1714,11 @@ msgstr "Åtkomst nekad" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Pin count must be at least 1" -msgstr "" +msgstr "Antalet pinnar måste vara minst 1" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Pin count too large" -msgstr "" +msgstr "Antal pinnar för stort" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c @@ -1794,23 +1797,23 @@ msgstr "Fingerar djup sömn tills larm, Ctrl-C eller filskrivning.\n" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does IN without loading ISR" -msgstr "" +msgstr "Program gör IN utan att ladda ISR" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does OUT without loading OSR" -msgstr "" +msgstr "Program gör OUT utan att läsa in OSR" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program must contain at least one 16-bit instruction." -msgstr "" +msgstr "Programmet måste innehålla minst en 16-bitars instruktion." #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program size invalid" -msgstr "" +msgstr "Programstorlek ogiltig" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program too large" -msgstr "" +msgstr "Programmet är för stort" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." @@ -1818,7 +1821,7 @@ msgstr "Pull används inte när riktningen är output." #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "RAISE mode is not implemented" -msgstr "" +msgstr "RAISE-läge är inte implementerat" #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" @@ -1828,6 +1831,10 @@ msgstr "RNG DeInit-fel" msgid "RNG Init Error" msgstr "RNG Init-fel" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "RS485 stöds ännu inte på den här enheten" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1835,6 +1842,7 @@ msgstr "RS485-inversion specificerad när den inte är i RS485-läge" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC-kalibrering stöds inte av detta kort" @@ -1843,7 +1851,7 @@ msgid "RTC is not supported on this board" msgstr "RTC stöds inte av detta kort" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Stöds ännu inte på den här enheten" @@ -1900,12 +1908,6 @@ msgstr "Kör i säkert läge! " msgid "SD card CSD format not supported" msgstr "SD-kort CSD-format stöds inte" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA eller SCL behöver en pullup" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1926,7 +1928,7 @@ msgstr "SPI reinitialiseringsfel" #: ports/raspberrypi/common-hal/busio/SPI.c msgid "SPI peripheral in use" -msgstr "" +msgstr "SPI-enhet används redan" #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" @@ -1960,11 +1962,11 @@ msgstr "Serversidans kontext kan inte ha värdnamn" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Set pin count must be between 1 and 5" -msgstr "" +msgstr "Inställt antal pinnar måste vara mellan 1 och 5" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Side set pin count must be between 1 and 5" -msgstr "" +msgstr "Sido-setets antal pinnar måste vara mellan 1 och 5" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" @@ -2142,7 +2144,7 @@ msgstr "UART reinit-fel" #: ports/raspberrypi/common-hal/busio/UART.c msgid "UART not yet supported" -msgstr "" +msgstr "UART stöds ännu inte" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" @@ -2207,7 +2209,7 @@ msgstr "Det gick inte att skriva till sleep_memory." msgid "Unexpected nrfx uuid type" msgstr "Oväntad nrfx uuid-typ" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Ej hanterat ESP TLS-fel %d-%d-%x-%d" @@ -2514,7 +2516,7 @@ msgstr "buffertsegmenten måste vara lika långa" msgid "buffer too small" msgstr "buffert för liten" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "buffert för liten för begärd längd" @@ -3683,6 +3685,10 @@ msgstr "pop från en tom PulseIn" msgid "pop from empty %q" msgstr "pop från tom %q" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3: e argument kan inte vara 0" @@ -3719,11 +3725,11 @@ msgstr "trycka båda knapparna vid uppstart.\n" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "pull_threshold must be between 1 and 32" -msgstr "" +msgstr "pull_threshold måste vara mellan 1 och 32" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "push_threshold must be between 1 and 32" -msgstr "" +msgstr "push_threshold måste vara mellan 1 och 32" #: extmod/modutimeq.c msgid "queue overflow" @@ -3922,7 +3928,7 @@ msgstr "tröskelvärdet måste ligga i intervallet 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "tile måste vara större än noll" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -4213,6 +4219,15 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA eller SCL behöver en pullup" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "Ogiltig användning av TLS Socket" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "Misslyckades att sätta SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "%d adresspinnar och %d RGB-pinnar indikerar en höjd av %d, inte %d" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 09def43300..f4b5497778 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-30 02:32+0000\n" +"PO-Revision-Date: 2021-02-09 14:03+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -351,7 +351,7 @@ msgstr "Suǒyǒu shǐyòng de shìjiàn píndào" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "All state machines in use" -msgstr "" +msgstr "suǒ yǒu zhèng zài shǐ yòng de zhuàng tài jī" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" @@ -643,6 +643,10 @@ msgstr "USB jīhuó shí wúfǎ chóngxīn bǎng ding '/'." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Wúfǎ chóng zhì wèi bootloader, yīnwèi méiyǒu bootloader cúnzài." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "wú fǎ shè zhì tào jiē zì xuǎn xiàng" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Dāng fāngxiàng xiàng nèi shí, bùnéng shèzhì gāi zhí." @@ -881,7 +885,7 @@ msgstr "EXTINT píndào yǐjīng shǐyòng" msgid "Error in regex" msgstr "Zhèngzé biǎodá shì cuòwù" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "cuò wù: bǎng dìng shī bài" @@ -940,7 +944,7 @@ msgstr "FFT jǐn wéi ndarrays dìng yì" msgid "FFT is implemented for linear arrays only" msgstr "FFT jǐn shì yòng yú xiàn xìng zhèn liè" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "SSL wòshǒu shībài" @@ -1070,7 +1074,7 @@ msgstr "I2C chūshǐhuà cuòwù" #: ports/raspberrypi/common-hal/busio/I2C.c msgid "I2C peripheral in use" -msgstr "" +msgstr "I2C wài shè zhèng zài shǐ yòng zhōng" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" @@ -1099,7 +1103,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Init program size invalid" -msgstr "" +msgstr "Init chéng xù dà xiǎo wú xiào" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" @@ -1116,27 +1120,27 @@ msgstr "Shūrù/shūchū cuòwù" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d jumps on pin" -msgstr "" +msgstr "zhǐ lìng %d zài yǐn jiǎo shàng tiào zhuǎn" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts in more bits than pin count" -msgstr "" +msgstr "zhǐ lìng %d yí wèi chāo guò yǐn jiǎo jì shù" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts out more bits than pin count" -msgstr "" +msgstr "zhǐ lìng %d yí chū de wèi bǐ yǐn jiǎo shù duō" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d uses extra pin" -msgstr "" +msgstr "zhǐ lìng %d shǐ yòng é wài de yǐn jiǎo" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d waits on input outside of count" -msgstr "" +msgstr "zhǐ lìng %d děng dài jì shù zhī wài de shū rù" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" @@ -1313,7 +1317,7 @@ msgstr "Ānquán móshì wúxiào" msgid "Invalid size" msgstr "dà xiǎo wú xiào" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "TLS de chā zuò wú xiào" @@ -1321,10 +1325,6 @@ msgstr "TLS de chā zuò wú xiào" msgid "Invalid state" msgstr "wú xiào zhuàng tài" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "TLS tào jiē zì de wú xiào shǐ yòng" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Yǔyīn wúxiào" @@ -1341,10 +1341,6 @@ msgstr "Wúxiào de làng làngcháo wénjiàn" msgid "Invalid word/bit length" msgstr "Wúxiào de zì/wèi chángdù" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "wèn tí shè zhì SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "mì yào bì xū wéi 16, 24 huò 32 zì jié cháng" @@ -1409,32 +1405,33 @@ msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d reads pin(s)" -msgstr "" +msgstr "shǒu xiān zài yǐn jiǎo zhōng quē shī. zhǐ lìng %d dú qǔ yǐn jiǎo" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" -msgstr "" +msgstr "shǒu xiān zài yǐn jiǎo zhōng quē shī. zhǐ lìng %d cóng yǐn jiǎo yí wèi" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d waits based on pin" msgstr "" +"shǒu xiān zài yǐn jiǎo zhōng quē shī. jī yú yǐn jiǎo de zhǐ lìng %d děng dài" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" -msgstr "" +msgstr "xiān lòu chū yǐn jiǎo. zhǐ lìng %d yí chū dào yǐn jiǎo" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d writes pin(s)" -msgstr "" +msgstr "xiān lòu chū yǐn jiǎo. zhǐ lìng %d xiě rù yǐn jiǎo" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_set_pin. Instruction %d sets pin(s)" -msgstr "" +msgstr "quē shǎo dì yī zǔ yǐn jiǎo. zhǐ lìng %d shè zhì yǐn jiǎo" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." @@ -1555,7 +1552,13 @@ msgstr "Méiyǒu wǎngluò yǔ gāi ssid" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No out in program" -msgstr "" +msgstr "chéng xù zhōng wèi tuì chū" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "zài SDA huò SCL shàng wèi zhǎo dào shàng lā; jiǎn chá nín de xiàn lù" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" @@ -1615,7 +1618,7 @@ msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi " #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Only IN/OUT of up to 8 supported" -msgstr "" +msgstr "jǐn zhī chí zuì duō 8 gè IN/OUT" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" @@ -1670,7 +1673,7 @@ msgstr "cāo zuò yǐ fēn shí" msgid "Out of memory" msgstr "nèi cún bù zú" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "tào jiē zì wài" @@ -1709,11 +1712,11 @@ msgstr "Quánxiàn bèi jùjué" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Pin count must be at least 1" -msgstr "" +msgstr "yǐn jiǎo jì shù bì xū zhì shǎo wéi 1" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Pin count too large" -msgstr "" +msgstr "yǐn jiǎo jì shù tài dà" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c @@ -1789,23 +1792,23 @@ msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does IN without loading ISR" -msgstr "" +msgstr "chéng xù zài bù jiā zǎi ISR de qíng kuàng xià wán chéng" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does OUT without loading OSR" -msgstr "" +msgstr "chéng xù zài bù jiā zǎi Osr de qíng kuàng xià zhí xíng OUT" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program must contain at least one 16-bit instruction." -msgstr "" +msgstr "chéng xù bì xū zhì shǎo bāo hán yí gè 16 wèi zhǐ lìng ." #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program size invalid" -msgstr "" +msgstr "chéng xù dà xiǎo wú xiào" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program too large" -msgstr "" +msgstr "chéng xù tài dà" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." @@ -1813,7 +1816,7 @@ msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng." #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "RAISE mode is not implemented" -msgstr "" +msgstr "wèi shí xiàn tí shēng mó shì" #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" @@ -1823,6 +1826,10 @@ msgstr "RNG qǔxiāo chūshǐhuà cuòwù" msgid "RNG Init Error" msgstr "RNG chūshǐhuà cuòwù" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "RS485 cǐ shè bèi shàng bù zhī chí" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1830,6 +1837,7 @@ msgstr "Wèi chǔyú RS485 móshì shí zhǐdìngle RS485 fǎn zhuǎn" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Cǐ bǎn bù zhīchí RTC jiàozhǔn" @@ -1838,7 +1846,7 @@ msgid "RTC is not supported on this board" msgstr "Cǐ bǎn bù zhīchí RTC" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 gāi shèbèi shàng bù zhīchí" @@ -1895,12 +1903,6 @@ msgstr "Zài ānquán móshì xià yùnxíng! " msgid "SD card CSD format not supported" msgstr "Bù zhīchí SD kǎ CSD géshì" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA huò SCL xūyào lādòng" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1921,7 +1923,7 @@ msgstr "SPI chóngxīn chūshǐhuà cuòwù" #: ports/raspberrypi/common-hal/busio/SPI.c msgid "SPI peripheral in use" -msgstr "" +msgstr "SPI wài shè zhèng zài shǐ yòng zhōng" #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" @@ -1955,11 +1957,11 @@ msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Set pin count must be between 1 and 5" -msgstr "" +msgstr "shè zhì yǐn jiǎo shù bì xū jiè yú 1 hé 5 zhī jiān" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Side set pin count must be between 1 and 5" -msgstr "" +msgstr "cè miàn shè zhì yǐn jiǎo shù bì xū jiè yú 1 hé 5 zhī jiān" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" @@ -2136,7 +2138,7 @@ msgstr "UART chóngxīn chūshǐhuà cuòwù" #: ports/raspberrypi/common-hal/busio/UART.c msgid "UART not yet supported" -msgstr "" +msgstr "UART shàng wèi shòu zhī chí" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" @@ -2201,7 +2203,7 @@ msgstr "wú fǎ xiě rù sleep_memory。" msgid "Unexpected nrfx uuid type" msgstr "Yìwài de nrfx uuid lèixíng" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Wèi chǔlǐ de ESP TLS cuòwù %d %d %x %d" @@ -2509,7 +2511,7 @@ msgstr "huǎnchōng qū qiēpiàn bìxū chángdù xiāngděng" msgid "buffer too small" msgstr "huǎnchōng qū tài xiǎo" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "huǎn chōng qū tài xiǎo, duì yú qǐng qiú de zì jié" @@ -3676,6 +3678,10 @@ msgstr "cóng kōng mài chōng tán chū" msgid "pop from empty %q" msgstr "cóng kōng %q dànchū" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "duān kǒu bì xū wéi >= 0" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3 cān shǔ bùnéng wéi 0" @@ -3712,11 +3718,11 @@ msgstr "zài qǐdòng shí tóngshí àn xià liǎng gè ànniǔ.\n" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "pull_threshold must be between 1 and 32" -msgstr "" +msgstr "lā lì yù zhí bì xū jiè yú 1 hé 32 zhī jiān" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "push_threshold must be between 1 and 32" -msgstr "" +msgstr "tuī sòng yù zhí bì xū jiè yú 1 hé 32 zhī jiān" #: extmod/modutimeq.c msgid "queue overflow" @@ -4206,6 +4212,15 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA huò SCL xūyào lādòng" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "TLS tào jiē zì de wú xiào shǐ yòng" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "wèn tí shè zhì SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d dìzhǐ yǐn jiǎo hé %d rgb yǐn jiǎo jiāng gāodù biǎoshì wèi %d, ér bùshì " diff --git a/main.c b/main.c index d9cdcca1da..7bfa565df4 100755 --- a/main.c +++ b/main.c @@ -184,6 +184,7 @@ STATIC void stop_mp(void) { #endif background_callback_reset(); + usb_background(); gc_deinit(); } diff --git a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk index a5722c9ade..697ec02c36 100644 --- a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk +++ b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk @@ -11,3 +11,4 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 diff --git a/ports/atmel-samd/boards/dynalora_usb/board.c b/ports/atmel-samd/boards/dynalora_usb/board.c new file mode 100644 index 0000000000..84960e73cf --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/board.c @@ -0,0 +1,37 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "supervisor/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.h b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.h new file mode 100644 index 0000000000..12359ce8f6 --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.h @@ -0,0 +1,36 @@ +#define MICROPY_HW_BOARD_NAME "DynaLoRa_USB" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_LED_STATUS (&pin_PA27) +#define MICROPY_HW_NEOPIXEL (&pin_PA19) + +#define SPI_FLASH_MOSI_PIN &pin_PA04 +#define SPI_FLASH_MISO_PIN &pin_PA05 +#define SPI_FLASH_SCK_PIN &pin_PA07 +#define SPI_FLASH_CS_PIN &pin_PA06 + +// These are pins not to reset. +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define DEFAULT_I2C_BUS_SCL (&pin_PA01) +#define DEFAULT_I2C_BUS_SDA (&pin_PA00) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA17) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA16) +#define DEFAULT_SPI_BUS_MISO (&pin_PA18) + +#define DEFAULT_UART_BUS_RX (&pin_PA00) +#define DEFAULT_UART_BUS_TX (&pin_PA01) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA23 1 +#define IGNORE_PIN_PA24 1 + +// Not connected +#define IGNORE_PIN_PA08 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA21 1 +#define IGNORE_PIN_PA22 1 +#define IGNORE_PIN_PA28 1 diff --git a/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.mk b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.mk new file mode 100644 index 0000000000..ac14e73956 --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.mk @@ -0,0 +1,39 @@ +USB_VID = 0x04D8 +USB_PID = 0xEA2A +USB_PRODUCT = "DynaLoRa_USB" +USB_MANUFACTURER = "BHDynamics" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = GD25Q32C +LONGINT_IMPL = MPZ + +CIRCUITPY_AUDIOBUSIO = 0 +CIRCUITPY_FREQUENCYIO = 0 +CIRCUITPY_GAMEPAD = 0 +CIRCUITPY_DISPLAYIO = 0 +CIRCUITPY_FULL_BUILD = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), ja) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif + +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM9x +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD diff --git a/ports/atmel-samd/boards/dynalora_usb/pins.c b/ports/atmel-samd/boards/dynalora_usb/pins.c new file mode 100644 index 0000000000..25f4985432 --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/pins.c @@ -0,0 +1,41 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA31) }, + + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA02) }, + + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_RADIO_CS), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_RADIO_INT), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_RADIO_RESET), MP_ROM_PTR(&pin_PA10) }, + + { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA00) }, + + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA00) }, + + { MP_ROM_QSTR(MP_QSTR_MOSI1), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_MISO1), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_SCK1), MP_ROM_PTR(&pin_PA01) }, + + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA27) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk b/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk index bedec87f45..6bbd84235a 100644 --- a/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk +++ b/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk @@ -11,3 +11,4 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 diff --git a/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk b/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk index 735d422973..1f88fbeade 100644 --- a/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk @@ -11,14 +11,5 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 - -CFLAGS_BOARD = --param max-inline-insns-auto=15 -ifeq ($(TRANSLATION), zh_Latn_pinyin) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 -endif -ifeq ($(TRANSLATION), de_DE) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 SUPEROPT_VM = 0 -endif +CFLAGS_INLINE_LIMIT = 45 diff --git a/ports/atmel-samd/common-hal/_pew/PewPew.c b/ports/atmel-samd/common-hal/_pew/PewPew.c index cfdfe75d8d..1e7561ac8e 100644 --- a/ports/atmel-samd/common-hal/_pew/PewPew.c +++ b/ports/atmel-samd/common-hal/_pew/PewPew.c @@ -40,6 +40,7 @@ static uint8_t pewpew_tc_index = 0xff; +static volatile uint16_t pewpew_ticks = 0; void pewpew_interrupt_handler(uint8_t index) { @@ -52,6 +53,7 @@ void pewpew_interrupt_handler(uint8_t index) { } pew_tick(); + ++pewpew_ticks; // Clear the interrupt bit. tc->COUNT16.INTFLAG.reg = TC_INTFLAG_MC0; @@ -123,3 +125,7 @@ void pew_reset(void) { } MP_STATE_VM(pew_singleton) = NULL; } + +uint16_t pew_get_ticks() { + return pewpew_ticks; +} diff --git a/ports/atmel-samd/common-hal/_pew/PewPew.h b/ports/atmel-samd/common-hal/_pew/PewPew.h index da1cae0a2c..a9c3b6626c 100644 --- a/ports/atmel-samd/common-hal/_pew/PewPew.h +++ b/ports/atmel-samd/common-hal/_pew/PewPew.h @@ -44,5 +44,6 @@ typedef struct { void pew_init(void); void pewpew_interrupt_handler(uint8_t index); void pew_reset(void); +uint16_t pew_get_ticks(void); #endif // MICROPY_INCLUDED_PEW_PEWPEW_H diff --git a/ports/atmel-samd/common-hal/busio/I2C.c b/ports/atmel-samd/common-hal/busio/I2C.c index ffe74a2743..2551f7bf17 100644 --- a/ports/atmel-samd/common-hal/busio/I2C.c +++ b/ports/atmel-samd/common-hal/busio/I2C.c @@ -97,7 +97,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (!gpio_get_pin_level(sda->number) || !gpio_get_pin_level(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/atmel-samd/common-hal/supervisor/Runtime.c b/ports/atmel-samd/common-hal/supervisor/Runtime.c index 6be38f216a..974f26cec1 100755 --- a/ports/atmel-samd/common-hal/supervisor/Runtime.c +++ b/ports/atmel-samd/common-hal/supervisor/Runtime.c @@ -28,10 +28,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { return (bool) serial_bytes_available(); } diff --git a/ports/cxd56/common-hal/supervisor/Runtime.c b/ports/cxd56/common-hal/supervisor/Runtime.c index a0d9e70ab1..eeeb1430f4 100755 --- a/ports/cxd56/common-hal/supervisor/Runtime.c +++ b/ports/cxd56/common-hal/supervisor/Runtime.c @@ -27,10 +27,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { return (bool) serial_bytes_available(); } diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index aac9347824..b4ff0612b3 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -164,7 +164,9 @@ LIBS += -lm endif # TinyUSB defines -CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_ESP32S2 -DCFG_TUSB_OS=OPT_OS_FREERTOS -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128 +CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_ESP32S2 -DCFG_TUSB_OS=OPT_OS_FREERTOS -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 +CFLAGS += -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128 +CFLAGS += -DCFG_TUD_VENDOR_RX_BUFSIZE=128 -DCFG_TUD_VENDOR_TX_BUFSIZE=128 ###################################### diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk index 2dce038819..52c63cb9c7 100644 --- a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk @@ -14,4 +14,10 @@ CIRCUITPY_ESP_FLASH_MODE=dio CIRCUITPY_ESP_FLASH_FREQ=80m CIRCUITPY_ESP_FLASH_SIZE=4MB +# We only have enough endpoints available in hardware to +# enable ONE of these at a time. +CIRCUITPY_USB_MIDI = 1 +CIRCUITPY_USB_HID = 0 +CIRCUITPY_USB_VENDOR = 0 + CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c index aaef97c7d1..4aa7b3b24f 100644 --- a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c +++ b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c @@ -27,6 +27,109 @@ #include "supervisor/board.h" #include "mpconfigboard.h" #include "shared-bindings/microcontroller/Pin.h" +#include "shared-module/displayio/__init__.h" +#include "shared-module/displayio/mipi_constants.h" + +#define DELAY 0x80 + +// display init sequence according to LilyGO example app +uint8_t display_init_sequence[] = { + // sw reset + 0x01, 0 | DELAY, 150, + // sleep out + 0x11, 0 | DELAY, 255, + // normal display mode on + 0x13, 0, + // display and color format settings + 0x36, 1, 0x08, + 0xB6, 2, 0x0A, 0x82, + 0x3A, 1 | DELAY, 0x55, 10, + // ST7789V frame rate setting + 0xB2, 5, 0x0C, 0x0C, 0x00, 0x33, 0x33, + // voltages: VGH / VGL + 0xB7, 1, 0x35, + // ST7789V power setting + 0xBB, 1, 0x28, + 0xC0, 1, 0x0C, + 0xC2, 2, 0x01, 0xFF, + 0xC3, 1, 0x10, + 0xC4, 1, 0x20, + 0xC6, 1, 0x0F, + 0xD0, 2, 0xA4, 0xA1, + // ST7789V gamma setting + 0xE0, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x32, 0x44, 0x42, 0x06, 0x0E, 0x12, 0x14, 0x17, + 0xE1, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x31, 0x54, 0x47, 0x0E, 0x1C, 0x17, 0x1B, 0x1E, + 0x21, 0, + // display on + 0x29, 0 | DELAY, 255, + }; + +static void display_init(void) { + busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; + + common_hal_busio_spi_construct( + spi, + &pin_GPIO36, // CLK + &pin_GPIO35, // MOSI + NULL // MISO not connected + ); + + common_hal_busio_spi_never_reset(spi); + + displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + bus->base.type = &displayio_fourwire_type; + + common_hal_displayio_fourwire_construct( + bus, + spi, + &pin_GPIO37, // DC + &pin_GPIO34, // CS + &pin_GPIO38, // RST + 40000000, // baudrate + 0, // polarity + 0 // phase + ); + + displayio_display_obj_t* display = &displays[0].display; + display->base.type = &displayio_display_type; + + // workaround as board_init() is called before reset_port() in main.c + pwmout_reset(); + + common_hal_displayio_display_construct( + display, + bus, + 240, // width (after rotation) + 135, // height (after rotation) + 52, // column start + 40, // row start + 90, // rotation + 16, // color depth + false, // grayscale + false, // pixels in a byte share a row. Only valid for depths < 8 + 1, // bytes per cell. Only valid for depths < 8 + false, // reverse_pixels_in_byte. Only valid for depths < 8 + true, // reverse_pixels_in_word + MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command + MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command + MIPI_COMMAND_WRITE_MEMORY_START, // write memory command + 0x37, // set vertical scroll command + display_init_sequence, + sizeof(display_init_sequence), + &pin_GPIO33, // backlight pin + NO_BRIGHTNESS_COMMAND, + 1.0f, // brightness (ignored) + false, // auto_brightness + false, // single_byte_bounds + false, // data_as_commands + true, // auto_refresh + 60, // native_frames_per_second + true, // backlight_on_high + false // SH1107_addressing + ); + + common_hal_never_reset_pin(&pin_GPIO33); // backlight pin +} void board_init(void) { // USB @@ -38,6 +141,9 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); #endif /* DEBUG */ + + // Display + display_init(); } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c index bda0fd227a..a30c6797a5 100644 --- a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c +++ b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c @@ -1,4 +1,5 @@ #include "shared-bindings/board/__init__.h" +#include "shared-module/displayio/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, @@ -41,13 +42,13 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO10) }, // 1.14 inch LCD ST7789 - { MP_ROM_QSTR(MP_QSTR_LCD_MISO), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_LCD_MOSI), MP_ROM_PTR(&pin_GPIO35) }, { MP_ROM_QSTR(MP_QSTR_LCD_CLK), MP_ROM_PTR(&pin_GPIO36) }, { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO34) }, { MP_ROM_QSTR(MP_QSTR_LCD_RST), MP_ROM_PTR(&pin_GPIO38) }, { MP_ROM_QSTR(MP_QSTR_LCD_BCKL), MP_ROM_PTR(&pin_GPIO33) }, { MP_ROM_QSTR(MP_QSTR_LCD_D_C), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) }, // Peripheral Power control { MP_ROM_QSTR(MP_QSTR_PE_POWER), MP_ROM_PTR(&pin_GPIO14) }, diff --git a/ports/esp32s2/common-hal/alarm/__init__.c b/ports/esp32s2/common-hal/alarm/__init__.c index 1cec5d4ae8..be435e2104 100644 --- a/ports/esp32s2/common-hal/alarm/__init__.c +++ b/ports/esp32s2/common-hal/alarm/__init__.c @@ -150,6 +150,14 @@ void common_hal_alarm_set_deep_sleep_alarms(size_t n_alarms, const mp_obj_t *ala void NORETURN alarm_enter_deep_sleep(void) { alarm_pin_pinalarm_prepare_for_deep_sleep(); alarm_touch_touchalarm_prepare_for_deep_sleep(); + + // Disable brownout detection, which appears to be triggered sometimes when + // waking from deep sleep. + // See https://www.esp32.com/viewtopic.php?f=13&t=19208#p71084 + // and https://github.com/adafruit/circuitpython/issues/4025#issuecomment-771027606 + // TODO: We can remove this workaround when ESP-IDF handles this. + CLEAR_PERI_REG_MASK(RTC_CNTL_BROWN_OUT_REG, RTC_CNTL_BROWN_OUT_RST_ENA); + // The ESP-IDF caches the deep sleep settings and applies them before sleep. // We don't need to worry about resetting them in the interim. esp_deep_sleep_start(); diff --git a/ports/esp32s2/common-hal/audiobusio/I2SOut.c b/ports/esp32s2/common-hal/audiobusio/I2SOut.c index 86322be865..eb9b6f8e16 100644 --- a/ports/esp32s2/common-hal/audiobusio/I2SOut.c +++ b/ports/esp32s2/common-hal/audiobusio/I2SOut.c @@ -63,6 +63,9 @@ void common_hal_audiobusio_i2sout_construct(audiobusio_i2sout_obj_t* self, self->bit_clock = bit_clock; self->word_select = word_select; self->data = data; + claim_pin(bit_clock); + claim_pin(word_select); + claim_pin(data); } bool common_hal_audiobusio_i2sout_deinited(audiobusio_i2sout_obj_t* self) { diff --git a/ports/esp32s2/common-hal/busio/I2C.c b/ports/esp32s2/common-hal/busio/I2C.c index 772262d0a5..8372eb8c30 100644 --- a/ports/esp32s2/common-hal/busio/I2C.c +++ b/ports/esp32s2/common-hal/busio/I2C.c @@ -85,7 +85,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (gpio_get_level(sda->number) == 0 || gpio_get_level(scl->number) == 0) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/esp32s2/common-hal/socketpool/Socket.c b/ports/esp32s2/common-hal/socketpool/Socket.c index fc50ca3ab2..5f93807bb6 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.c +++ b/ports/esp32s2/common-hal/socketpool/Socket.c @@ -3,7 +3,6 @@ * * The MIT License (MIT) * - * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries * Copyright (c) 2020 Lucian Copeland for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy @@ -38,16 +37,15 @@ #include "components/lwip/lwip/src/include/lwip/sys.h" #include "components/lwip/lwip/src/include/lwip/netdb.h" -STATIC socketpool_socket_obj_t * open_socket_handles[CONFIG_LWIP_MAX_SOCKETS]; // 4 on the wrover/wroom +STATIC socketpool_socket_obj_t * open_socket_handles[CONFIG_LWIP_MAX_SOCKETS]; void socket_reset(void) { for (size_t i = 0; i < MP_ARRAY_SIZE(open_socket_handles); i++) { if (open_socket_handles[i]) { if (open_socket_handles[i]->num > 0) { + // Close automatically clears socket handle common_hal_socketpool_socket_close(open_socket_handles[i]); - open_socket_handles[i] = NULL; } else { - // accidentally got a TCP socket in here, or something. open_socket_handles[i] = NULL; } } @@ -64,73 +62,14 @@ bool register_open_socket(socketpool_socket_obj_t* self) { return false; } -STATIC void _lazy_init_LWIP(socketpool_socket_obj_t* self) { - if (self->num != -1) { - return; //safe to call on existing socket - } - if (self->tls != NULL) { - mp_raise_RuntimeError(translate("Invalid use of TLS Socket")); - } - int socknum = -1; - socknum = lwip_socket(self->family, self->type, self->ipproto); - if (socknum < 0 || !register_open_socket(self)) { - mp_raise_RuntimeError(translate("Out of sockets")); - } - self->num = socknum; - lwip_fcntl(socknum, F_SETFL, O_NONBLOCK); -} - -STATIC void _lazy_init_TLS(socketpool_socket_obj_t* self) { - if (self->type != SOCK_STREAM || self->num != -1) { - mp_raise_RuntimeError(translate("Invalid socket for TLS")); - } - esp_tls_t* tls_handle = esp_tls_init(); - if (tls_handle == NULL) { - mp_raise_espidf_MemoryError(); - } - self->tls = tls_handle; -} - -void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, mp_uint_t timeout_ms) { - self->timeout_ms = timeout_ms; -} - -bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, - const char* host, size_t hostlen, uint8_t port) { - _lazy_init_LWIP(self); - - struct sockaddr_in bind_addr; - bind_addr.sin_addr.s_addr = inet_addr(host); - bind_addr.sin_family = AF_INET; - bind_addr.sin_port = htons(port); - - int opt = 1; - int err = lwip_setsockopt(self->num, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); - if (err != 0) { - mp_raise_RuntimeError(translate("Issue setting SO_REUSEADDR")); - } - int result = lwip_bind(self->num, (struct sockaddr *)&bind_addr, sizeof(bind_addr)) == 0; - return result; -} - -bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog) { - return lwip_listen(self->num, backlog) == 0; -} - socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, - uint8_t* ip, uint *port) { + uint8_t* ip, uint32_t *port) { struct sockaddr_in accept_addr; socklen_t socklen = sizeof(accept_addr); int newsoc = -1; bool timed_out = false; uint64_t start_ticks = supervisor_ticks_ms64(); - if (self->timeout_ms != (uint)-1) { - mp_printf(&mp_plat_print, "will timeout"); - } else { - mp_printf(&mp_plat_print, "won't timeout"); - } - // Allow timeouts and interrupts while (newsoc == -1 && !timed_out && @@ -140,7 +79,7 @@ socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_o } RUN_BACKGROUND_TASKS; newsoc = lwip_accept(self->num, (struct sockaddr *)&accept_addr, &socklen); - // In non-blocking mode, fail instead of looping + // In non-blocking mode, fail instead of timing out if (newsoc == -1 && self->timeout_ms == 0) { mp_raise_OSError(MP_EAGAIN); } @@ -159,9 +98,8 @@ socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_o socketpool_socket_obj_t *sock = m_new_obj_with_finaliser(socketpool_socket_obj_t); sock->base.type = &socketpool_socket_type; sock->num = newsoc; - sock->tls = NULL; - sock->ssl_context = NULL; sock->pool = self->pool; + sock->connected = true; if (!register_open_socket(sock)) { mp_raise_OSError(MP_EBADF); @@ -175,182 +113,97 @@ socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_o } } +bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + struct sockaddr_in bind_addr; + bind_addr.sin_addr.s_addr = inet_addr(host); + bind_addr.sin_family = AF_INET; + bind_addr.sin_port = htons(port); + + int opt = 1; + int err = lwip_setsockopt(self->num, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + if (err != 0) { + mp_raise_RuntimeError(translate("Cannot set socket options")); + } + int result = lwip_bind(self->num, (struct sockaddr *)&bind_addr, sizeof(bind_addr)) == 0; + return result; +} + +void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self) { + self->connected = false; + if (self->num >= 0) { + lwip_shutdown(self->num, 0); + lwip_close(self->num); + self->num = -1; + } + // Remove socket record + for (size_t i = 0; i < MP_ARRAY_SIZE(open_socket_handles); i++) { + if (open_socket_handles[i] == self) { + open_socket_handles[i] = NULL; + } + } +} + bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, - const char* host, mp_uint_t hostlen, mp_int_t port) { - // For simplicity we use esp_tls for all TCP connections. If it's not SSL, ssl_context will be - // NULL and should still work. This makes regular TCP connections more memory expensive but TLS - // should become more and more common. Therefore, we optimize for the TLS case. - - // Todo: move to SSL Wrapper and add lwip_connect() - _lazy_init_TLS(self); - - esp_tls_cfg_t* tls_config = NULL; - if (self->ssl_context != NULL) { - tls_config = &self->ssl_context->ssl_config; - } - int result = esp_tls_conn_new_sync(host, hostlen, port, tls_config, self->tls); - self->connected = result >= 0; - if (result < 0) { - int esp_tls_code; - int flags; - esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); - - if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { - mp_raise_espidf_MemoryError(); - } else if (ESP_ERR_MBEDTLS_SSL_HANDSHAKE_FAILED) { - mp_raise_OSError_msg_varg(translate("Failed SSL handshake")); - } else { - mp_raise_OSError_msg_varg(translate("Unhandled ESP TLS error %d %d %x %d"), esp_tls_code, flags, err, result); - } - } else { - // Connection successful, set the timeout on the underlying socket. We can't rely on the IDF - // to do it because the config structure is only used for TLS connections. Generally, we - // shouldn't hit this timeout because we try to only read available data. However, there is - // always a chance that we try to read something that is used internally. - int fd; - esp_tls_get_conn_sockfd(self->tls, &fd); - struct timeval tv; - tv.tv_sec = 2 * 60; // Two minutes - tv.tv_usec = 0; - setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)); - setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)); - } - - return self->connected; -} - -bool common_hal_socketpool_socket_get_connected(socketpool_socket_obj_t* self) { - return self->connected; -} - -mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { - int sent = -1; - if (self->num != -1) { - // LWIP Socket - // TODO: deal with potential failure/add timeout? - sent = lwip_send(self->num, buf, len, 0); - } else if (self->tls != NULL) { - // TLS Socket - sent = esp_tls_conn_write(self->tls, buf, len); - } - - if (sent < 0) { - mp_raise_OSError(MP_ENOTCONN); - } - return sent; -} - -mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { - int received = 0; - bool timed_out = false; - - if (self->num != -1) { - // LWIP Socket - uint64_t start_ticks = supervisor_ticks_ms64(); - received = -1; - while (received == -1 && - !timed_out && - !mp_hal_is_interrupted()) { - if (self->timeout_ms != (uint)-1 && self->timeout_ms != 0) { - timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; - } - RUN_BACKGROUND_TASKS; - received = lwip_recv(self->num, (void*) buf, len - 1, 0); - - // In non-blocking mode, fail instead of looping - if (received == -1 && self->timeout_ms == 0) { - mp_raise_OSError(MP_EAGAIN); - } - } - } else if (self->tls != NULL) { - // TLS Socket - int status = 0; - uint64_t start_ticks = supervisor_ticks_ms64(); - int sockfd; - esp_err_t err = esp_tls_get_conn_sockfd(self->tls, &sockfd); - if (err != ESP_OK) { - mp_raise_OSError(MP_EBADF); - } - while (received == 0 && - status >= 0 && - !timed_out && - !mp_hal_is_interrupted()) { - if (self->timeout_ms != (uint)-1) { - timed_out = self->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; - } - RUN_BACKGROUND_TASKS; - size_t available = esp_tls_get_bytes_avail(self->tls); - if (available == 0) { - // This reads the raw socket buffer and is used for non-TLS connections - // and between encrypted TLS blocks. - status = lwip_ioctl(sockfd, FIONREAD, &available); - } - size_t remaining = len - received; - if (available > remaining) { - available = remaining; - } - if (available > 0) { - status = esp_tls_conn_read(self->tls, (void*) buf + received, available); - if (status == 0) { - // Reading zero when something is available indicates a closed - // connection. (The available bytes could have been TLS internal.) - break; - } - if (status > 0) { - received += status; - } - } - } - } else { - // Socket does not have a valid descriptor of either type - mp_raise_OSError(MP_EBADF); - } - - if (timed_out) { - mp_raise_OSError(ETIMEDOUT); - } - return received; -} - -mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, - const char* host, size_t hostlen, uint8_t port, const uint8_t* buf, mp_uint_t len) { - - _lazy_init_LWIP(self); - - // Get the IP address string + const char* host, size_t hostlen, uint32_t port) { const struct addrinfo hints = { .ai_family = AF_INET, .ai_socktype = SOCK_STREAM, }; - struct addrinfo *result; - int error = lwip_getaddrinfo(host, NULL, &hints, &result); - if (error != 0 || result == NULL) { - return 0; + struct addrinfo *result_i; + int error = lwip_getaddrinfo(host, NULL, &hints, &result_i); + if (error != 0 || result_i == NULL) { + mp_raise_OSError(EHOSTUNREACH); } // Set parameters struct sockaddr_in dest_addr; #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wcast-align" - dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result->ai_addr)->sin_addr.s_addr; + dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result_i->ai_addr)->sin_addr.s_addr; #pragma GCC diagnostic pop - freeaddrinfo(result); + freeaddrinfo(result_i); dest_addr.sin_family = AF_INET; dest_addr.sin_port = htons(port); - int bytes_sent = lwip_sendto(self->num, buf, len, 0, (struct sockaddr *)&dest_addr, sizeof(dest_addr)); - if (bytes_sent < 0) { - mp_raise_BrokenPipeError(); - return 0; + // Replace above with function call ----- + + // Switch to blocking mode for this one call + int opts; + opts = lwip_fcntl(self->num,F_GETFL,0); + opts = opts & (~O_NONBLOCK); + lwip_fcntl(self->num, F_SETFL, opts); + + int result = -1; + result = lwip_connect(self->num, (struct sockaddr *)&dest_addr, sizeof(struct sockaddr_in)); + + // Switch back once complete + opts = opts | O_NONBLOCK; + lwip_fcntl(self->num, F_SETFL, opts); + + if (result >= 0) { + self->connected = true; + return true; + } else { + mp_raise_OSError(errno); } - return bytes_sent; +} + +bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self) { + return self->num < 0; +} + +bool common_hal_socketpool_socket_get_connected(socketpool_socket_obj_t* self) { + return self->connected; +} + +bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog) { + return lwip_listen(self->num, backlog) == 0; } mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, - uint8_t* buf, mp_uint_t len, uint8_t* ip, uint *port) { - - _lazy_init_LWIP(self); + uint8_t* buf, uint32_t len, uint8_t* ip, uint *port) { struct sockaddr_in source_addr; socklen_t socklen = sizeof(source_addr); @@ -362,7 +215,7 @@ mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* se while (received == -1 && !timed_out && !mp_hal_is_interrupted()) { - if (self->timeout_ms != (uint)-1 && self->timeout_ms != 0) { + if (self->timeout_ms != (uint)-1 && self->timeout_ms != 0) { timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; } RUN_BACKGROUND_TASKS; @@ -389,24 +242,87 @@ mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* se return received; } -void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self) { - self->connected = false; - if (self->tls != NULL) { - esp_tls_conn_destroy(self->tls); - self->tls = NULL; +mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len) { + int received = 0; + bool timed_out = false; + + if (self->num != -1) { + // LWIP Socket + uint64_t start_ticks = supervisor_ticks_ms64(); + received = -1; + while (received == -1 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->timeout_ms != (uint)-1 && self->timeout_ms != 0) { + timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; + } + RUN_BACKGROUND_TASKS; + received = lwip_recv(self->num, (void*) buf, len, 0); + + // In non-blocking mode, fail instead of looping + if (received == -1 && self->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } + } + } else { + mp_raise_OSError(MP_EBADF); } - if (self->num >= 0) { - lwip_shutdown(self->num, 0); - lwip_close(self->num); - self->num = -1; + + if (timed_out) { + mp_raise_OSError(ETIMEDOUT); } + return received; } -bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self) { - return self->tls == NULL && self->num < 0; +mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len) { + int sent = -1; + if (self->num != -1) { + // LWIP Socket + // TODO: deal with potential failure/add timeout? + sent = lwip_send(self->num, buf, len, 0); + } else { + mp_raise_OSError(MP_EBADF); + } + + if (sent < 0) { + mp_raise_OSError(errno); + } + return sent; } +mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port, const uint8_t* buf, uint32_t len) { -mp_uint_t common_hal_socketpool_socket_get_hash(socketpool_socket_obj_t* self) { - return self->num; + // Set parameters + const struct addrinfo hints = { + .ai_family = AF_INET, + .ai_socktype = SOCK_STREAM, + }; + struct addrinfo *result_i; + int error = lwip_getaddrinfo(host, NULL, &hints, &result_i); + if (error != 0 || result_i == NULL) { + mp_raise_OSError(EHOSTUNREACH); + } + + // Set parameters + struct sockaddr_in dest_addr; + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wcast-align" + dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result_i->ai_addr)->sin_addr.s_addr; + #pragma GCC diagnostic pop + freeaddrinfo(result_i); + + dest_addr.sin_family = AF_INET; + dest_addr.sin_port = htons(port); + + int bytes_sent = lwip_sendto(self->num, buf, len, 0, (struct sockaddr *)&dest_addr, sizeof(dest_addr)); + if (bytes_sent < 0) { + mp_raise_BrokenPipeError(); + return 0; + } + return bytes_sent; +} + +void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, uint32_t timeout_ms) { + self->timeout_ms = timeout_ms; } diff --git a/ports/esp32s2/common-hal/socketpool/Socket.h b/ports/esp32s2/common-hal/socketpool/Socket.h index 4e6cfa5ef6..b86f5597c4 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.h +++ b/ports/esp32s2/common-hal/socketpool/Socket.h @@ -41,8 +41,6 @@ typedef struct { int family; int ipproto; bool connected; - esp_tls_t* tls; - ssl_sslcontext_obj_t* ssl_context; socketpool_socketpool_obj_t* pool; mp_uint_t timeout_ms; } socketpool_socket_obj_t; diff --git a/ports/esp32s2/common-hal/socketpool/SocketPool.c b/ports/esp32s2/common-hal/socketpool/SocketPool.c index 70a8b4eca5..fbd6dca7af 100644 --- a/ports/esp32s2/common-hal/socketpool/SocketPool.c +++ b/ports/esp32s2/common-hal/socketpool/SocketPool.c @@ -25,6 +25,7 @@ */ #include "shared-bindings/socketpool/SocketPool.h" +#include "common-hal/socketpool/Socket.h" #include "py/runtime.h" #include "shared-bindings/wifi/__init__.h" @@ -65,23 +66,23 @@ socketpool_socket_obj_t* common_hal_socketpool_socket(socketpool_socketpool_obj_ mp_raise_NotImplementedError(translate("Only IPv4 sockets supported")); } - // Consider LWIP and MbedTLS "variant" sockets to be incompatible (for now) - // The variant of the socket is determined by whether the socket is wrapped - // by SSL. If no TLS handle is set in sslcontext_wrap_socket, the first call - // of bind() or connect() will create a LWIP socket with a corresponding - // socketnum. - // TODO: move MbedTLS to its own duplicate Socket or Server API, maybe? socketpool_socket_obj_t *sock = m_new_obj_with_finaliser(socketpool_socket_obj_t); sock->base.type = &socketpool_socket_type; - sock->num = -1; sock->type = socket_type; sock->family = addr_family; sock->ipproto = ipproto; + sock->pool = self; sock->timeout_ms = (uint)-1; - sock->tls = NULL; - sock->ssl_context = NULL; - sock->pool = self; + // Create LWIP socket + int socknum = -1; + socknum = lwip_socket(sock->family, sock->type, sock->ipproto); + if (socknum < 0 || !register_open_socket(sock)) { + mp_raise_RuntimeError(translate("Out of sockets")); + } + sock->num = socknum; + // Sockets should be nonblocking in most cases + lwip_fcntl(socknum, F_SETFL, O_NONBLOCK); return sock; } diff --git a/ports/esp32s2/common-hal/ssl/SSLContext.c b/ports/esp32s2/common-hal/ssl/SSLContext.c index e24fd338b6..afc3ecce22 100644 --- a/ports/esp32s2/common-hal/ssl/SSLContext.c +++ b/ports/esp32s2/common-hal/ssl/SSLContext.c @@ -25,6 +25,9 @@ */ #include "shared-bindings/ssl/SSLContext.h" +#include "shared-bindings/ssl/SSLSocket.h" + +#include "bindings/espidf/__init__.h" #include "py/runtime.h" @@ -32,10 +35,26 @@ void common_hal_ssl_sslcontext_construct(ssl_sslcontext_obj_t* self) { } -socketpool_socket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, +ssl_sslsocket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, socketpool_socket_obj_t* socket, bool server_side, const char* server_hostname) { - socket->ssl_context = self; + if (socket->type != SOCK_STREAM) { + mp_raise_RuntimeError(translate("Invalid socket for TLS")); + } + + ssl_sslsocket_obj_t *sock = m_new_obj_with_finaliser(ssl_sslsocket_obj_t); + sock->base.type = &ssl_sslsocket_type; + sock->ssl_context = self; + sock->sock = socket; + + esp_tls_t* tls_handle = esp_tls_init(); + if (tls_handle == NULL) { + mp_raise_espidf_MemoryError(); + } + sock->tls = tls_handle; + + // TODO: do something with the original socket? Don't call a close on the internal LWIP. + // Should we store server hostname on the socket in case connect is called with an ip? - return socket; + return sock; } diff --git a/ports/esp32s2/common-hal/ssl/SSLSocket.c b/ports/esp32s2/common-hal/ssl/SSLSocket.c new file mode 100644 index 0000000000..10c29108c4 --- /dev/null +++ b/ports/esp32s2/common-hal/ssl/SSLSocket.c @@ -0,0 +1,176 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/ssl/SSLSocket.h" +#include "shared-bindings/socketpool/Socket.h" +#include "shared-bindings/ssl/SSLContext.h" + +#include "bindings/espidf/__init__.h" +#include "lib/utils/interrupt_char.h" +#include "py/mperrno.h" +#include "py/runtime.h" +#include "supervisor/shared/tick.h" + +ssl_sslsocket_obj_t* common_hal_ssl_sslsocket_accept(ssl_sslsocket_obj_t* self, + uint8_t* ip, uint32_t *port) { + socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self->sock, ip, port); + ssl_sslsocket_obj_t * sslsock = common_hal_ssl_sslcontext_wrap_socket(self->ssl_context, sock, false, NULL); + return sslsock; +} + +bool common_hal_ssl_sslsocket_bind(ssl_sslsocket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + return common_hal_socketpool_socket_bind(self->sock, host, hostlen, port); +} + +void common_hal_ssl_sslsocket_close(ssl_sslsocket_obj_t* self) { + common_hal_socketpool_socket_close(self->sock); + esp_tls_conn_destroy(self->tls); + self->tls = NULL; +} + +bool common_hal_ssl_sslsocket_connect(ssl_sslsocket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + esp_tls_cfg_t* tls_config = NULL; + tls_config = &self->ssl_context->ssl_config; + int result = esp_tls_conn_new_sync(host, hostlen, port, tls_config, self->tls); + self->sock->connected = result >= 0; + if (result < 0) { + int esp_tls_code; + int flags; + esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); + + if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { + mp_raise_espidf_MemoryError(); + } else if (ESP_ERR_MBEDTLS_SSL_HANDSHAKE_FAILED) { + mp_raise_OSError_msg_varg(translate("Failed SSL handshake")); + } else { + mp_raise_OSError_msg_varg(translate("Unhandled ESP TLS error %d %d %x %d"), esp_tls_code, flags, err, result); + } + } else { + // Connection successful, set the timeout on the underlying socket. We can't rely on the IDF + // to do it because the config structure is only used for TLS connections. Generally, we + // shouldn't hit this timeout because we try to only read available data. However, there is + // always a chance that we try to read something that is used internally. + int fd; + esp_tls_get_conn_sockfd(self->tls, &fd); + struct timeval tv; + tv.tv_sec = 2 * 60; // Two minutes + tv.tv_usec = 0; + setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)); + setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)); + } + + return self->sock->connected; +} + +bool common_hal_ssl_sslsocket_get_closed(ssl_sslsocket_obj_t* self) { + return self->tls == NULL && self->sock->num < 0; +} + +bool common_hal_ssl_sslsocket_get_connected(ssl_sslsocket_obj_t* self) { + return self->sock->connected; +} + +bool common_hal_ssl_sslsocket_listen(ssl_sslsocket_obj_t* self, int backlog) { + return common_hal_socketpool_socket_listen(self->sock, backlog); +} + +mp_uint_t common_hal_ssl_sslsocket_recv_into(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len) { + int received = 0; + bool timed_out = false; + int status = 0; + uint64_t start_ticks = supervisor_ticks_ms64(); + int sockfd; + esp_err_t err = esp_tls_get_conn_sockfd(self->tls, &sockfd); + if (err != ESP_OK) { + mp_raise_OSError(MP_EBADF); + } + while (received == 0 && + status >= 0 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->sock->timeout_ms != (uint)-1 && self->sock->timeout_ms != 0) { + timed_out = self->sock->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks >= self->sock->timeout_ms; + } + RUN_BACKGROUND_TASKS; + size_t available = esp_tls_get_bytes_avail(self->tls); + if (available == 0) { + // This reads the raw socket buffer and is used for non-TLS connections + // and between encrypted TLS blocks. + status = lwip_ioctl(sockfd, FIONREAD, &available); + } + size_t remaining = len - received; + if (available > remaining) { + available = remaining; + } + if (available > 0) { + status = esp_tls_conn_read(self->tls, (void*) buf + received, available); + if (status == 0) { + // Reading zero when something is available indicates a closed + // connection. (The available bytes could have been TLS internal.) + break; + } + if (status > 0) { + received += status; + } + } + // In non-blocking mode, fail instead of timing out + if (received==0 && self->sock->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } + } + + if (timed_out) { + mp_raise_OSError(ETIMEDOUT); + } + return received; +} + +mp_uint_t common_hal_ssl_sslsocket_send(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len) { + int sent = -1; + sent = esp_tls_conn_write(self->tls, buf, len); + + if (sent < 0) { + int esp_tls_code; + int flags; + esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); + + if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { + mp_raise_espidf_MemoryError(); + } else if (ESP_ERR_MBEDTLS_SSL_HANDSHAKE_FAILED) { + mp_raise_OSError_msg_varg(translate("Failed SSL handshake")); + } else { + mp_raise_OSError_msg_varg(translate("Unhandled ESP TLS error %d %d %x %d"), esp_tls_code, flags, err, sent); + } + } + return sent; +} + +void common_hal_ssl_sslsocket_settimeout(ssl_sslsocket_obj_t* self, uint32_t timeout_ms) { + self->sock->timeout_ms = timeout_ms; +} diff --git a/ports/esp32s2/common-hal/ssl/SSLSocket.h b/ports/esp32s2/common-hal/ssl/SSLSocket.h new file mode 100644 index 0000000000..e9e5bff062 --- /dev/null +++ b/ports/esp32s2/common-hal/ssl/SSLSocket.h @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SSL_SSLSOCKET_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SSL_SSLSOCKET_H + +#include "py/obj.h" + +#include "common-hal/ssl/SSLContext.h" +#include "common-hal/socketpool/Socket.h" + +#include "components/esp-tls/esp_tls.h" + +typedef struct { + mp_obj_base_t base; + socketpool_socket_obj_t * sock; + esp_tls_t* tls; + ssl_sslcontext_obj_t* ssl_context; +} ssl_sslsocket_obj_t; + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SSL_SSLSOCKET_H diff --git a/ports/esp32s2/common-hal/supervisor/Runtime.c b/ports/esp32s2/common-hal/supervisor/Runtime.c index ea663f897d..974f26cec1 100644 --- a/ports/esp32s2/common-hal/supervisor/Runtime.c +++ b/ports/esp32s2/common-hal/supervisor/Runtime.c @@ -28,10 +28,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { - return (bool) serial_bytes_available(); +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { + return (bool) serial_bytes_available(); } diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 562c60998c..5073d8812d 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -28,18 +28,18 @@ CIRCUITPY_FREQUENCYIO = 1 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_ROTARYIO = 1 CIRCUITPY_NVM = 1 +CIRCUITPY_PS2IO ?= 1 +CIRCUITPY_TOUCHIO_USE_NATIVE ?= 1 # We don't have enough endpoints to include MIDI. -CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_USB_MIDI ?= 0 +CIRCUITPY_USB_HID ?= 1 +# We have borrowed the VENDOR nomenclature from tinyusb. VENDOR AKA WEBUSB +CIRCUITPY_USB_VENDOR ?= 0 CIRCUITPY_WIFI = 1 CIRCUITPY_WATCHDOG ?= 1 + CIRCUITPY_ESPIDF = 1 -ifndef CIRCUITPY_PS2IO -CIRCUITPY_PS2IO = 1 -endif - -ifndef CIRCUITPY_TOUCHIO_USE_NATIVE -CIRCUITPY_TOUCHIO_USE_NATIVE = 1 -endif - CIRCUITPY_MODULE ?= none + +USB_NUM_EP = 5 diff --git a/ports/litex/common-hal/supervisor/Runtime.c b/ports/litex/common-hal/supervisor/Runtime.c index ea663f897d..974f26cec1 100644 --- a/ports/litex/common-hal/supervisor/Runtime.c +++ b/ports/litex/common-hal/supervisor/Runtime.c @@ -28,10 +28,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { - return (bool) serial_bytes_available(); +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { + return (bool) serial_bytes_available(); } diff --git a/ports/mimxrt10xx/common-hal/busio/I2C.c b/ports/mimxrt10xx/common-hal/busio/I2C.c index aaa2549a81..c8daddc4bb 100644 --- a/ports/mimxrt10xx/common-hal/busio/I2C.c +++ b/ports/mimxrt10xx/common-hal/busio/I2C.c @@ -110,7 +110,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if( !GPIO_PinRead(sda->gpio, sda->number) || !GPIO_PinRead(scl->gpio, scl->number)) { common_hal_reset_pin(sda); common_hal_reset_pin(scl); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/mimxrt10xx/common-hal/busio/SPI.c b/ports/mimxrt10xx/common-hal/busio/SPI.c index ce7cbea7ec..00d8d9867f 100644 --- a/ports/mimxrt10xx/common-hal/busio/SPI.c +++ b/ports/mimxrt10xx/common-hal/busio/SPI.c @@ -38,6 +38,8 @@ #define LPSPI_MASTER_CLK_FREQ (CLOCK_GetFreq(kCLOCK_Usb1PllPfd0Clk) / (CLOCK_GetDiv(kCLOCK_LpspiDiv) + 1)) +#define MAX_SPI_BUSY_RETRIES 100 + //arrays use 0 based numbering: SPI1 is stored at index 0 #define MAX_SPI 4 STATIC bool reserved_spi[MAX_SPI]; @@ -289,7 +291,12 @@ bool common_hal_busio_spi_write(busio_spi_obj_t *self, xfer.dataSize = len; xfer.configFlags = kLPSPI_MasterPcs0; - const status_t status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + status_t status; + int retries = MAX_SPI_BUSY_RETRIES; + do { + status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + } while (status == kStatus_LPSPI_Busy && --retries > 0); + if (status != kStatus_Success) printf("%s: status %ld\r\n", __func__, status); @@ -311,7 +318,12 @@ bool common_hal_busio_spi_read(busio_spi_obj_t *self, xfer.rxData = data; xfer.dataSize = len; - const status_t status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + status_t status; + int retries = MAX_SPI_BUSY_RETRIES; + do { + status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + } while (status == kStatus_LPSPI_Busy && --retries > 0); + if (status != kStatus_Success) printf("%s: status %ld\r\n", __func__, status); @@ -333,7 +345,12 @@ bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, const uint8_t *data_ou xfer.rxData = data_in; xfer.dataSize = len; - const status_t status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + status_t status; + int retries = MAX_SPI_BUSY_RETRIES; + do { + status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + } while (status == kStatus_LPSPI_Busy && --retries > 0); + if (status != kStatus_Success) printf("%s: status %ld\r\n", __func__, status); diff --git a/ports/mimxrt10xx/common-hal/supervisor/Runtime.c b/ports/mimxrt10xx/common-hal/supervisor/Runtime.c index 6be38f216a..974f26cec1 100755 --- a/ports/mimxrt10xx/common-hal/supervisor/Runtime.c +++ b/ports/mimxrt10xx/common-hal/supervisor/Runtime.c @@ -28,10 +28,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { return (bool) serial_bytes_available(); } diff --git a/ports/nrf/common-hal/busio/I2C.c b/ports/nrf/common-hal/busio/I2C.c index 37cb192df8..654fa857ff 100644 --- a/ports/nrf/common-hal/busio/I2C.c +++ b/ports/nrf/common-hal/busio/I2C.c @@ -131,7 +131,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, const mcu_pin_obj_t * if (!nrf_gpio_pin_read(sda->number) || !nrf_gpio_pin_read(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/raspberrypi/Makefile b/ports/raspberrypi/Makefile index eab7deee68..e1169ce7d2 100644 --- a/ports/raspberrypi/Makefile +++ b/ports/raspberrypi/Makefile @@ -99,6 +99,7 @@ INC += -I. \ -isystem sdk/src/rp2_common/pico_platform/include/ \ -isystem sdk/src/rp2_common/pico_runtime/printf/include/ \ -isystem sdk/src/rp2_common/pico_bootrom/include/ \ + -isystem sdk/src/rp2_common/pico_unique_id/include/ \ -Isdk_config \ -I../../lib/tinyusb/src \ -I../../supervisor/shared/usb \ @@ -184,6 +185,7 @@ SRC_SDK := \ src/rp2_common/pico_printf/printf.c \ src/rp2_common/pico_runtime/runtime.c \ src/rp2_common/pico_stdio/stdio.c \ + src/rp2_common/pico_unique_id/unique_id.c \ SRC_SDK := $(addprefix sdk/, $(SRC_SDK)) diff --git a/ports/raspberrypi/background.c b/ports/raspberrypi/background.c index c85b83b41e..52f2e4fb4e 100644 --- a/ports/raspberrypi/background.c +++ b/ports/raspberrypi/background.c @@ -25,20 +25,11 @@ */ #include "background.h" -#include "supervisor/filesystem.h" -#include "supervisor/shared/tick.h" -#include "supervisor/usb.h" - #include "py/runtime.h" -#include "shared-module/network/__init__.h" -#include "supervisor/shared/stack.h" #include "supervisor/port.h" -#if CIRCUITPY_DISPLAYIO -#include "shared-module/displayio/__init__.h" -#endif - void port_start_background_task(void) {} void port_finish_background_task(void) {} -void port_background_task(void) {} +void port_background_task(void) { +} diff --git a/ports/raspberrypi/bindings/rp2pio/StateMachine.c b/ports/raspberrypi/bindings/rp2pio/StateMachine.c index 0f6f84a565..34633949ed 100644 --- a/ports/raspberrypi/bindings/rp2pio/StateMachine.c +++ b/ports/raspberrypi/bindings/rp2pio/StateMachine.c @@ -189,7 +189,7 @@ STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n if (bufinfo.len % 2 != 0) { mp_raise_ValueError(translate("Program size invalid")); } - if (bufinfo.len > 32) { + if (bufinfo.len > 64) { mp_raise_ValueError(translate("Program too large")); } diff --git a/ports/raspberrypi/boards/raspberry_pi_pico/pins.c b/ports/raspberrypi/boards/raspberry_pi_pico/pins.c index 913676ad26..e1927bc80c 100644 --- a/ports/raspberrypi/boards/raspberry_pi_pico/pins.c +++ b/ports/raspberrypi/boards/raspberry_pi_pico/pins.c @@ -24,6 +24,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_GP20), MP_ROM_PTR(&pin_GPIO20) }, { MP_ROM_QSTR(MP_QSTR_GP21), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_GP22), MP_ROM_PTR(&pin_GPIO22) }, + { MP_ROM_QSTR(MP_QSTR_SMPS_MODE), MP_ROM_PTR(&pin_GPIO23) }, { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO25) }, { MP_ROM_QSTR(MP_QSTR_GP25), MP_ROM_PTR(&pin_GPIO25) }, { MP_ROM_QSTR(MP_QSTR_GP26_A0), MP_ROM_PTR(&pin_GPIO26) }, @@ -35,5 +36,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_GP28_A2), MP_ROM_PTR(&pin_GPIO28) }, { MP_ROM_QSTR(MP_QSTR_GP28), MP_ROM_PTR(&pin_GPIO28) }, { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) }, + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO29) }, }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/raspberrypi/bs2_default_padded_checksummed.S b/ports/raspberrypi/bs2_default_padded_checksummed.S index d77f4867c6..6b7074e3b0 100644 --- a/ports/raspberrypi/bs2_default_padded_checksummed.S +++ b/ports/raspberrypi/bs2_default_padded_checksummed.S @@ -1,20 +1,23 @@ -// Padded and checksummed version of: /Users/graham/dev/mu/pico_sdk/cmake-build-debug-mu/src/rp2_common/boot_stage2/bs2_default.bin +// Padded and checksummed version of: /home/pi/pico/pico-examples/build/pico-sdk/src/rp2_common/boot_stage2/bs2_default.bin -.section .boot2, "a" +.cpu cortex-m0plus +.thumb -.byte 0x00, 0xb5, 0x2f, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60 -.byte 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2b, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x02, 0x21, 0x59, 0x61 -.byte 0x01, 0x21, 0xf0, 0x22, 0x99, 0x50, 0x28, 0x49, 0x19, 0x60, 0x01, 0x21, 0x99, 0x60, 0x35, 0x20 -.byte 0x00, 0xf0, 0x3e, 0xf8, 0x02, 0x22, 0x90, 0x42, 0x14, 0xd0, 0x06, 0x21, 0x19, 0x66, 0x00, 0xf0 -.byte 0x2e, 0xf8, 0x19, 0x6e, 0x01, 0x21, 0x19, 0x66, 0x00, 0x20, 0x18, 0x66, 0x1a, 0x66, 0x00, 0xf0 -.byte 0x26, 0xf8, 0x19, 0x6e, 0x19, 0x6e, 0x19, 0x6e, 0x05, 0x20, 0x00, 0xf0, 0x29, 0xf8, 0x01, 0x21 -.byte 0x08, 0x42, 0xf9, 0xd1, 0x00, 0x21, 0x99, 0x60, 0x18, 0x49, 0x19, 0x60, 0x00, 0x21, 0x59, 0x60 -.byte 0x17, 0x49, 0x18, 0x48, 0x01, 0x60, 0x01, 0x21, 0x99, 0x60, 0xeb, 0x21, 0x19, 0x66, 0xa0, 0x21 -.byte 0x19, 0x66, 0x00, 0xf0, 0x0c, 0xf8, 0x00, 0x21, 0x99, 0x60, 0x13, 0x49, 0x11, 0x48, 0x01, 0x60 -.byte 0x01, 0x21, 0x99, 0x60, 0x01, 0xbc, 0x00, 0x28, 0x00, 0xd1, 0x10, 0x48, 0x00, 0x47, 0x03, 0xb5 -.byte 0x99, 0x6a, 0x04, 0x20, 0x01, 0x42, 0xfb, 0xd0, 0x01, 0x20, 0x01, 0x42, 0xf8, 0xd1, 0x03, 0xbd -.byte 0x02, 0xb5, 0x18, 0x66, 0x18, 0x66, 0xff, 0xf7, 0xf2, 0xff, 0x18, 0x6e, 0x18, 0x6e, 0x02, 0xbd -.byte 0x00, 0x00, 0x02, 0x40, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x07, 0x00, 0x00, 0x03, 0x5f, 0x00 -.byte 0x21, 0x22, 0x00, 0x00, 0xf4, 0x00, 0x00, 0x18, 0x22, 0x20, 0x00, 0xa0, 0x01, 0x01, 0x00, 0x10 -.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x27, 0x2a, 0x60 +.section .boot2, "ax" + +.byte 0x00, 0xb5, 0x32, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60 +.byte 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2e, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x02, 0x21, 0x59, 0x61 +.byte 0x01, 0x21, 0xf0, 0x22, 0x99, 0x50, 0x2b, 0x49, 0x19, 0x60, 0x01, 0x21, 0x99, 0x60, 0x35, 0x20 +.byte 0x00, 0xf0, 0x44, 0xf8, 0x02, 0x22, 0x90, 0x42, 0x14, 0xd0, 0x06, 0x21, 0x19, 0x66, 0x00, 0xf0 +.byte 0x34, 0xf8, 0x19, 0x6e, 0x01, 0x21, 0x19, 0x66, 0x00, 0x20, 0x18, 0x66, 0x1a, 0x66, 0x00, 0xf0 +.byte 0x2c, 0xf8, 0x19, 0x6e, 0x19, 0x6e, 0x19, 0x6e, 0x05, 0x20, 0x00, 0xf0, 0x2f, 0xf8, 0x01, 0x21 +.byte 0x08, 0x42, 0xf9, 0xd1, 0x00, 0x21, 0x99, 0x60, 0x1b, 0x49, 0x19, 0x60, 0x00, 0x21, 0x59, 0x60 +.byte 0x1a, 0x49, 0x1b, 0x48, 0x01, 0x60, 0x01, 0x21, 0x99, 0x60, 0xeb, 0x21, 0x19, 0x66, 0xa0, 0x21 +.byte 0x19, 0x66, 0x00, 0xf0, 0x12, 0xf8, 0x00, 0x21, 0x99, 0x60, 0x16, 0x49, 0x14, 0x48, 0x01, 0x60 +.byte 0x01, 0x21, 0x99, 0x60, 0x01, 0xbc, 0x00, 0x28, 0x00, 0xd0, 0x00, 0x47, 0x12, 0x48, 0x13, 0x49 +.byte 0x08, 0x60, 0x03, 0xc8, 0x80, 0xf3, 0x08, 0x88, 0x08, 0x47, 0x03, 0xb5, 0x99, 0x6a, 0x04, 0x20 +.byte 0x01, 0x42, 0xfb, 0xd0, 0x01, 0x20, 0x01, 0x42, 0xf8, 0xd1, 0x03, 0xbd, 0x02, 0xb5, 0x18, 0x66 +.byte 0x18, 0x66, 0xff, 0xf7, 0xf2, 0xff, 0x18, 0x6e, 0x18, 0x6e, 0x02, 0xbd, 0x00, 0x00, 0x02, 0x40 +.byte 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x07, 0x00, 0x00, 0x03, 0x5f, 0x00, 0x21, 0x22, 0x00, 0x00 +.byte 0xf4, 0x00, 0x00, 0x18, 0x22, 0x20, 0x00, 0xa0, 0x00, 0x01, 0x00, 0x10, 0x08, 0xed, 0x00, 0xe0 +.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x74, 0xb2, 0x4e, 0x7a diff --git a/ports/raspberrypi/common-hal/busio/I2C.c b/ports/raspberrypi/common-hal/busio/I2C.c index fa49e375e2..26a7f3807f 100644 --- a/ports/raspberrypi/common-hal/busio/I2C.c +++ b/ports/raspberrypi/common-hal/busio/I2C.c @@ -90,7 +90,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (!gpio_get(sda->number) || !gpio_get(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.c b/ports/raspberrypi/common-hal/microcontroller/Processor.c index 0ad3a51e28..e22286ca3d 100644 --- a/ports/raspberrypi/common-hal/microcontroller/Processor.c +++ b/ports/raspberrypi/common-hal/microcontroller/Processor.c @@ -25,6 +25,7 @@ */ #include +#include #include "py/mphal.h" #include "common-hal/microcontroller/Processor.h" @@ -53,12 +54,9 @@ uint32_t common_hal_mcu_processor_get_frequency(void) { } void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) { - // TODO: get the unique id from the flash. The chip itself doesn't have one. - // for (int i=0; i<4; i++) { - // for (int k=0; k<4; k++) { - // raw_id[4 * i + k] = (*(id_addresses[i]) >> k * 8) & 0xff; - // } - // } + pico_unique_board_id_t retrieved_id; + pico_get_unique_board_id(&retrieved_id); + memcpy(raw_id, retrieved_id.id, COMMON_HAL_MCU_PROCESSOR_UID_LENGTH); } mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) { diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.h b/ports/raspberrypi/common-hal/microcontroller/Processor.h index b7c86e8506..afb43f9bdf 100644 --- a/ports/raspberrypi/common-hal/microcontroller/Processor.h +++ b/ports/raspberrypi/common-hal/microcontroller/Processor.h @@ -27,7 +27,9 @@ #ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H #define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H -#define COMMON_HAL_MCU_PROCESSOR_UID_LENGTH 16 +#include "src/rp2_common/pico_unique_id/include/pico/unique_id.h" + +#define COMMON_HAL_MCU_PROCESSOR_UID_LENGTH PICO_UNIQUE_BOARD_ID_SIZE_BYTES #include "py/obj.h" diff --git a/ports/raspberrypi/common-hal/microcontroller/__init__.c b/ports/raspberrypi/common-hal/microcontroller/__init__.c index 85bfc329d3..bfea8b2d9a 100644 --- a/ports/raspberrypi/common-hal/microcontroller/__init__.c +++ b/ports/raspberrypi/common-hal/microcontroller/__init__.c @@ -35,12 +35,16 @@ #include "shared-bindings/microcontroller/__init__.h" #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/microcontroller/Processor.h" +#include "supervisor/filesystem.h" +#include "supervisor/port.h" #include "supervisor/shared/safe_mode.h" #include "supervisor/shared/translate.h" #include "src/rp2040/hardware_structs/include/hardware/structs/sio.h" #include "src/rp2_common/hardware_sync/include/hardware/sync.h" +#include "hardware/watchdog.h" + void common_hal_mcu_delay_us(uint32_t delay) { mp_hal_delay_us(delay); } @@ -66,8 +70,11 @@ void common_hal_mcu_enable_interrupts(void) { asm volatile ("cpsie i" : : : "memory"); } +static bool next_reset_to_bootloader = false; + void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) { if (runmode == RUNMODE_BOOTLOADER) { + next_reset_to_bootloader = true; } else { } if (runmode == RUNMODE_SAFE_MODE) { @@ -76,6 +83,12 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) { } void common_hal_mcu_reset(void) { + filesystem_flush(); + if (next_reset_to_bootloader) { + reset_to_bootloader(); + } else { + reset_cpu(); + } } // The singleton microcontroller.Processor object, bound to microcontroller.cpu diff --git a/ports/raspberrypi/common-hal/neopixel_write/__init__.c b/ports/raspberrypi/common-hal/neopixel_write/__init__.c index 10462b5a33..561d438e2e 100644 --- a/ports/raspberrypi/common-hal/neopixel_write/__init__.c +++ b/ports/raspberrypi/common-hal/neopixel_write/__init__.c @@ -29,6 +29,7 @@ #include "bindings/rp2pio/StateMachine.h" #include "common-hal/rp2pio/StateMachine.h" #include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/digitalio/DigitalInOut.h" #include "supervisor/port.h" @@ -89,7 +90,11 @@ void common_hal_neopixel_write(const digitalio_digitalinout_obj_t* digitalinout, // Use a private deinit of the state machine that doesn't reset the pin. rp2pio_statemachine_deinit(&state_machine, true); + + // Reset the pin and release it from the PIO gpio_init(digitalinout->pin->number); + common_hal_digitalio_digitalinout_switch_to_output((digitalio_digitalinout_obj_t*)digitalinout, false, DRIVE_MODE_PUSH_PULL); + // Update the next start. next_start_raw_ticks = port_get_raw_ticks(NULL) + 1; } diff --git a/ports/raspberrypi/common-hal/pwmio/PWMOut.c b/ports/raspberrypi/common-hal/pwmio/PWMOut.c index 567ec5ef54..3d8979a036 100644 --- a/ports/raspberrypi/common-hal/pwmio/PWMOut.c +++ b/ports/raspberrypi/common-hal/pwmio/PWMOut.c @@ -107,7 +107,7 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, if (variable_frequency) { return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; } - // If the other user wants to change frequency then we can't share either. + // If the other user wants a variable frequency then we can't share either. if ((slice_fixed_frequency & (1 << slice)) != 0) { return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; } @@ -119,7 +119,7 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, self->slice = slice; self->channel = channel; channel_use |= channel_use_mask; - if (!variable_frequency) { + if (variable_frequency) { slice_fixed_frequency |= 1 << slice; } diff --git a/ports/raspberrypi/common-hal/rp2pio/StateMachine.c b/ports/raspberrypi/common-hal/rp2pio/StateMachine.c index 6510410b0e..90c48130e1 100644 --- a/ports/raspberrypi/common-hal/rp2pio/StateMachine.c +++ b/ports/raspberrypi/common-hal/rp2pio/StateMachine.c @@ -546,15 +546,23 @@ static bool _transfer(rp2pio_statemachine_obj_t *self, size_t tx_remaining = out_len; while (rx_remaining || tx_remaining) { - if (tx_remaining && !pio_sm_is_tx_fifo_full(self->pio, self->state_machine)) { - *tx_destination = *data_out; - data_out++; - --tx_remaining; - } - if (rx_remaining && !pio_sm_is_rx_fifo_empty(self->pio, self->state_machine)) { - *data_in = (uint8_t) *rx_source; - data_in++; - --rx_remaining; + for (int i=0; i<32; i++) { + bool did_transfer = false; + if (tx_remaining && !pio_sm_is_tx_fifo_full(self->pio, self->state_machine)) { + *tx_destination = *data_out; + data_out++; + --tx_remaining; + did_transfer = true; + } + if (rx_remaining && !pio_sm_is_rx_fifo_empty(self->pio, self->state_machine)) { + *data_in = (uint8_t) *rx_source; + data_in++; + --rx_remaining; + did_transfer = true; + } + if (!did_transfer) { + break; + } } RUN_BACKGROUND_TASKS; if (mp_hal_is_interrupted()) { diff --git a/ports/raspberrypi/common-hal/supervisor/Runtime.c b/ports/raspberrypi/common-hal/supervisor/Runtime.c index 6be38f216a..974f26cec1 100755 --- a/ports/raspberrypi/common-hal/supervisor/Runtime.c +++ b/ports/raspberrypi/common-hal/supervisor/Runtime.c @@ -28,10 +28,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { return (bool) serial_bytes_available(); } diff --git a/ports/raspberrypi/link.ld b/ports/raspberrypi/link.ld index d642fd6807..b83299dee8 100644 --- a/ports/raspberrypi/link.ld +++ b/ports/raspberrypi/link.ld @@ -59,12 +59,11 @@ SECTIONS */ .text : { - __reset_start = .; - KEEP (*(.reset)) - . = ALIGN(256); - __reset_end = .; - ASSERT(__reset_end - __reset_start == 256, "ERROR: reset section should only be 256 bytes"); + __logical_binary_start = .; KEEP (*(.vectors)) + KEEP (*(.binary_info_header)) + __binary_info_header_end = .; + KEEP (*(.reset)) /* TODO revisit this now memset/memcpy/float in ROM */ /* bit of a hack right now to exclude all floating point and time critical (e.g. memset, memcpy) code from * FLASH ... we will include any thing excluded here in .data below by default */ @@ -246,5 +245,7 @@ SECTIONS /* Check if data + heap + stack exceeds RAM limit */ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed") + + ASSERT( __binary_info_header_end - __logical_binary_start <= 256, "Binary info must be in first 256 bytes of the binary") /* todo assert on extra code */ } diff --git a/ports/raspberrypi/mpconfigport.mk b/ports/raspberrypi/mpconfigport.mk index 6fb4ffaae3..292e509cd3 100644 --- a/ports/raspberrypi/mpconfigport.mk +++ b/ports/raspberrypi/mpconfigport.mk @@ -42,7 +42,7 @@ CIRCUITPY_AUDIOIO = 0 INTERNAL_LIBM = 1 -USB_SERIAL_NUMBER_LENGTH = 32 +USB_SERIAL_NUMBER_LENGTH = 16 # Number of USB endpoint pairs. USB_NUM_EP = 8 diff --git a/ports/raspberrypi/sdk b/ports/raspberrypi/sdk index 26653ea81e..55346c9530 160000 --- a/ports/raspberrypi/sdk +++ b/ports/raspberrypi/sdk @@ -1 +1 @@ -Subproject commit 26653ea81e340cacee55025d110c3e014a252a87 +Subproject commit 55346c953012ef5b32f392fea3b42814db8df2a5 diff --git a/ports/raspberrypi/supervisor/port.c b/ports/raspberrypi/supervisor/port.c index b14f5173d6..7c503514ab 100644 --- a/ports/raspberrypi/supervisor/port.c +++ b/ports/raspberrypi/supervisor/port.c @@ -52,6 +52,8 @@ #include "tusb.h" +#include "pico/bootrom.h" +#include "hardware/watchdog.h" extern volatile bool mp_msc_enabled; @@ -110,13 +112,17 @@ void reset_port(void) { } void reset_to_bootloader(void) { - // reset(); + reset_usb_boot(0, 0); while (true) {} } void reset_cpu(void) { - // reset(); - while (true) {} + watchdog_reboot(0, SRAM_END, 0); + watchdog_start_tick(12); + + while (true) { + __wfi(); + } } bool port_has_fixed_stack(void) { diff --git a/ports/stm/common-hal/supervisor/Runtime.c b/ports/stm/common-hal/supervisor/Runtime.c index ea663f897d..974f26cec1 100755 --- a/ports/stm/common-hal/supervisor/Runtime.c +++ b/ports/stm/common-hal/supervisor/Runtime.c @@ -28,10 +28,10 @@ #include "shared-bindings/supervisor/Runtime.h" #include "supervisor/serial.h" -bool common_hal_get_serial_connected(void) { +bool common_hal_supervisor_runtime_get_serial_connected(void) { return (bool) serial_connected(); } -bool common_hal_get_serial_bytes_available(void) { - return (bool) serial_bytes_available(); +bool common_hal_supervisor_runtime_get_serial_bytes_available(void) { + return (bool) serial_bytes_available(); } diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index 3ce7c01173..f907bf7ae6 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -292,6 +292,9 @@ endif ifeq ($(CIRCUITPY_USB_MIDI),1) SRC_PATTERNS += usb_midi/% endif +ifeq ($(CIRCUITPY_USB_VENDOR),1) +SRC_PATTERNS += usb_vendor/% +endif ifeq ($(CIRCUITPY_USTACK),1) SRC_PATTERNS += ustack/% endif @@ -388,6 +391,7 @@ SRC_COMMON_HAL_ALL = \ socketpool/Socket.c \ ssl/__init__.c \ ssl/SSLContext.c \ + ssl/SSLSocket.c \ supervisor/Runtime.c \ supervisor/__init__.c \ watchdog/WatchDogMode.c \ diff --git a/py/circuitpy_mpconfig.mk b/py/circuitpy_mpconfig.mk index e13eca6efe..b63bbcb3ea 100644 --- a/py/circuitpy_mpconfig.mk +++ b/py/circuitpy_mpconfig.mk @@ -346,7 +346,10 @@ CIRCUITPY_USB_MSC ?= 1 CFLAGS += -DCIRCUITPY_USB_MSC=$(CIRCUITPY_USB_MSC) CIRCUITPY_USB_SERIAL ?= 1 -CFLAGS += -DCIRCUITPY_USB_SERIAL=$(CIRCUITPY_USB_MSC) +CFLAGS += -DCIRCUITPY_USB_SERIAL=$(CIRCUITPY_USB_SERIAL) + +CIRCUITPY_USB_VENDOR ?= 0 +CFLAGS += -DCIRCUITPY_USB_VENDOR=$(CIRCUITPY_USB_VENDOR) ifndef USB_NUM_EP $(error "USB_NUM_EP (number of USB endpoint pairs)must be defined") diff --git a/shared-bindings/_pew/__init__.c b/shared-bindings/_pew/__init__.c index 498beaf1c9..912d267c4c 100644 --- a/shared-bindings/_pew/__init__.c +++ b/shared-bindings/_pew/__init__.c @@ -29,6 +29,7 @@ #include "PewPew.h" #include "common-hal/_pew/PewPew.h" + STATIC mp_obj_t get_pressed(void) { pew_obj_t *pew = MP_STATE_VM(pew_singleton); if (!pew) { @@ -41,12 +42,19 @@ STATIC mp_obj_t get_pressed(void) { STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_pressed_obj, get_pressed); +STATIC mp_obj_t get_ticks(void) { + return mp_obj_new_int(pew_get_ticks()); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_ticks_obj, get_ticks); + + //| """LED matrix driver""" //| STATIC const mp_rom_map_elem_t pew_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR__pew) }, { MP_OBJ_NEW_QSTR(MP_QSTR_PewPew), MP_ROM_PTR(&pewpew_type)}, { MP_OBJ_NEW_QSTR(MP_QSTR_get_pressed), MP_ROM_PTR(&get_pressed_obj)}, + { MP_OBJ_NEW_QSTR(MP_QSTR_get_ticks), MP_ROM_PTR(&get_ticks_obj)}, }; STATIC MP_DEFINE_CONST_DICT(pew_module_globals, pew_module_globals_table); diff --git a/shared-bindings/adafruit_bus_device/I2CDevice.c b/shared-bindings/adafruit_bus_device/I2CDevice.c index 3c5d33f52d..e6ec8c1472 100644 --- a/shared-bindings/adafruit_bus_device/I2CDevice.c +++ b/shared-bindings/adafruit_bus_device/I2CDevice.c @@ -234,23 +234,24 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_write_then_readinto(size_t n_args, mp_obj_t dest[13]; uint8_t num_kws = 2; + uint8_t index = 2; mp_load_method(self->i2c, MP_QSTR_writeto_then_readfrom, dest); - dest[2] = MP_OBJ_NEW_SMALL_INT(self->device_address); - dest[3] = args[ARG_out_buffer].u_obj; - dest[4] = args[ARG_in_buffer].u_obj; - dest[5] = MP_OBJ_NEW_QSTR(MP_QSTR_out_start); - dest[6] = MP_OBJ_NEW_SMALL_INT(args[ARG_out_start].u_int); + dest[index++] = MP_OBJ_NEW_SMALL_INT(self->device_address); + dest[index++] = args[ARG_out_buffer].u_obj; + dest[index++] = args[ARG_in_buffer].u_obj; + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_out_start); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_out_start].u_int); if (args[ARG_out_end].u_int != INT_MAX) { - dest[7] = MP_OBJ_NEW_QSTR(MP_QSTR_out_end); - dest[8] = MP_OBJ_NEW_SMALL_INT(args[ARG_out_end].u_int); + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_out_end); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_out_end].u_int); num_kws++; } - dest[9] = MP_OBJ_NEW_QSTR(MP_QSTR_in_start); - dest[10] = MP_OBJ_NEW_SMALL_INT(args[ARG_in_start].u_int); + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_in_start); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_in_start].u_int); if (args[ARG_in_end].u_int != INT_MAX) { - dest[11] = MP_OBJ_NEW_QSTR(MP_QSTR_in_end); - dest[12] = MP_OBJ_NEW_SMALL_INT(args[ARG_in_end].u_int); + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_in_end); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_in_end].u_int); num_kws++; } diff --git a/shared-bindings/adafruit_bus_device/SPIDevice.c b/shared-bindings/adafruit_bus_device/SPIDevice.c index e127e39b81..e37f883682 100644 --- a/shared-bindings/adafruit_bus_device/SPIDevice.c +++ b/shared-bindings/adafruit_bus_device/SPIDevice.c @@ -34,6 +34,7 @@ #include "lib/utils/buffer_helper.h" #include "lib/utils/context_manager_helpers.h" +#include "py/objproperty.h" #include "py/runtime.h" #include "supervisor/shared/translate.h" @@ -100,22 +101,51 @@ STATIC mp_obj_t adafruit_bus_device_spidevice_make_new(const mp_obj_type_t *type return (mp_obj_t)self; } +//| def __enter__(self) -> busio.SPI: +//| """Starts a SPI transaction by configuring the SPI and asserting chip select.""" +//| ... +//| STATIC mp_obj_t adafruit_bus_device_spidevice_obj___enter__(mp_obj_t self_in) { adafruit_bus_device_spidevice_obj_t *self = MP_OBJ_TO_PTR(self_in); - common_hal_adafruit_bus_device_spidevice_enter(self); - return self->spi; + return common_hal_adafruit_bus_device_spidevice_enter(self); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adafruit_bus_device_spidevice___enter___obj, adafruit_bus_device_spidevice_obj___enter__); + +//| def __exit__(self) -> None: +//| """Ends a SPI transaction by deasserting chip select. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t adafruit_bus_device_spidevice_obj___exit__(size_t n_args, const mp_obj_t *args) { common_hal_adafruit_bus_device_spidevice_exit(MP_OBJ_TO_PTR(args[0])); return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(adafruit_bus_device_spidevice___exit___obj, 4, 4, adafruit_bus_device_spidevice_obj___exit__); +//| spi: busio.SPI +//| """The underlying SPI bus. Useful for weird uses like clocking an SD card without chip select. +//| +//| You shouldn't normally need this.""" +//| +STATIC mp_obj_t adafruit_bus_device_spidevice_obj_get_spi(mp_obj_t self_in) { + adafruit_bus_device_spidevice_obj_t *self = MP_OBJ_TO_PTR(self_in); + return common_hal_adafruit_bus_device_spidevice_get_spi(self); +} +MP_DEFINE_CONST_FUN_OBJ_1(adafruit_bus_device_spidevice_get_spi_obj, adafruit_bus_device_spidevice_obj_get_spi); + +const mp_obj_property_t adafruit_bus_device_spidevice_spi_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&adafruit_bus_device_spidevice_get_spi_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + STATIC const mp_rom_map_elem_t adafruit_bus_device_spidevice_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&adafruit_bus_device_spidevice___enter___obj) }, { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&adafruit_bus_device_spidevice___exit___obj) }, + + { MP_ROM_QSTR(MP_QSTR_spi), MP_ROM_PTR(&adafruit_bus_device_spidevice_spi_obj) }, }; STATIC MP_DEFINE_CONST_DICT(adafruit_bus_device_spidevice_locals_dict, adafruit_bus_device_spidevice_locals_dict_table); diff --git a/shared-bindings/adafruit_bus_device/SPIDevice.h b/shared-bindings/adafruit_bus_device/SPIDevice.h index 5596b157f0..baa9ec464a 100644 --- a/shared-bindings/adafruit_bus_device/SPIDevice.h +++ b/shared-bindings/adafruit_bus_device/SPIDevice.h @@ -44,7 +44,8 @@ extern const mp_obj_type_t adafruit_bus_device_spidevice_type; // Initializes the hardware peripheral. extern void common_hal_adafruit_bus_device_spidevice_construct(adafruit_bus_device_spidevice_obj_t *self, busio_spi_obj_t *spi, digitalio_digitalinout_obj_t *cs, uint32_t baudrate, uint8_t polarity, uint8_t phase, uint8_t extra_clocks); -extern void common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self); +extern mp_obj_t common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self); extern void common_hal_adafruit_bus_device_spidevice_exit(adafruit_bus_device_spidevice_obj_t *self); +extern mp_obj_t common_hal_adafruit_bus_device_spidevice_get_spi(adafruit_bus_device_spidevice_obj_t *self); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_BUSDEVICE_SPIDEVICE_H diff --git a/shared-bindings/sdcardio/SDCard.c b/shared-bindings/sdcardio/SDCard.c index 975f8b0953..35d6c14973 100644 --- a/shared-bindings/sdcardio/SDCard.c +++ b/shared-bindings/sdcardio/SDCard.c @@ -55,6 +55,12 @@ //| Data transfers use the specified baurate (rounded down to one that is supported by //| the microcontroller) //| +//| .. important:: +//| If the same SPI bus is shared with other peripherals, it is important that +//| the SD card be initialized before accessing any other peripheral on the bus. +//| Failure to do so can prevent the SD card from being recognized until it is +//| powered off or re-inserted. +//| //| Example usage: //| //| .. code-block:: python diff --git a/shared-bindings/socketpool/Socket.c b/shared-bindings/socketpool/Socket.c index 0074173405..da827798c4 100644 --- a/shared-bindings/socketpool/Socket.c +++ b/shared-bindings/socketpool/Socket.c @@ -3,8 +3,8 @@ * * The MIT License (MIT) * - * SPDX-FileCopyrightText: Copyright (c) 2014 Damien P. George - * 2018 Nick Moore for Adafruit Industries + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -64,6 +64,25 @@ STATIC mp_obj_t socketpool_socket___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket___exit___obj, 4, 4, socketpool_socket___exit__); +//| def accept(self) -> Tuple[Socket, Tuple[str, int]]: +//| """Accept a connection on a listening socket of type SOCK_STREAM, +//| creating a new socket of type SOCK_STREAM. +//| Returns a tuple of (new_socket, remote_address)""" +//| +STATIC mp_obj_t socketpool_socket_accept(mp_obj_t self_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + uint8_t ip[4]; + uint32_t port; + + socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self, ip, &port); + + mp_obj_t tuple_contents[2]; + tuple_contents[0] = MP_OBJ_FROM_PTR(sock); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_accept_obj, socketpool_socket_accept); + //| def bind(self, address: Tuple[str, int]) -> None: //| """Bind a socket to an address //| @@ -79,8 +98,11 @@ STATIC mp_obj_t socketpool_socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { size_t hostlen; const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } - bool ok = common_hal_socketpool_socket_bind(self, host, hostlen, port); + bool ok = common_hal_socketpool_socket_bind(self, host, hostlen, (uint32_t)port); if (!ok) { mp_raise_ValueError(translate("Error: Failure to bind")); } @@ -89,41 +111,6 @@ STATIC mp_obj_t socketpool_socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_bind_obj, socketpool_socket_bind); -//| def listen(self, backlog: int) -> None: -//| """Set socket to listen for incoming connections -//| -//| :param ~int backlog: length of backlog queue for waiting connetions""" -//| ... -//| -STATIC mp_obj_t socketpool_socket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { - socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - - int backlog = mp_obj_get_int(backlog_in); - - common_hal_socketpool_socket_listen(self, backlog); - return mp_const_none; -} -STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_listen_obj, socketpool_socket_listen); - -//| def accept(self) -> Tuple[Socket, Tuple[str, int]]: -//| """Accept a connection on a listening socket of type SOCK_STREAM, -//| creating a new socket of type SOCK_STREAM. -//| Returns a tuple of (new_socket, remote_address)""" -//| -STATIC mp_obj_t socketpool_socket_accept(mp_obj_t self_in) { - socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - uint8_t ip[4]; - uint port; - - socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self, ip, &port); - - mp_obj_t tuple_contents[2]; - tuple_contents[0] = MP_OBJ_FROM_PTR(sock); - tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); - return mp_obj_new_tuple(2, tuple_contents); -} -STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_accept_obj, socketpool_socket_accept); - //| def close(self) -> None: //| """Closes this Socket and makes its resources available to its SocketPool.""" //| @@ -149,8 +136,11 @@ STATIC mp_obj_t socketpool_socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { size_t hostlen; const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } - bool ok = common_hal_socketpool_socket_connect(self, host, hostlen, port); + bool ok = common_hal_socketpool_socket_connect(self, host, hostlen, (uint32_t)port); if (!ok) { mp_raise_OSError(0); } @@ -159,31 +149,47 @@ STATIC mp_obj_t socketpool_socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_connect_obj, socketpool_socket_connect); -//| def send(self, bytes: ReadableBuffer) -> int: -//| """Send some bytes to the connected remote address. -//| Suits sockets of type SOCK_STREAM +//| def listen(self, backlog: int) -> None: +//| """Set socket to listen for incoming connections //| -//| :param ~bytes bytes: some bytes to send""" +//| :param ~int backlog: length of backlog queue for waiting connetions""" //| ... //| -STATIC mp_obj_t socketpool_socket_send(mp_obj_t self_in, mp_obj_t buf_in) { +STATIC mp_obj_t socketpool_socket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - if (common_hal_socketpool_socket_get_closed(self)) { - // Bad file number. - mp_raise_OSError(MP_EBADF); - } - if (!common_hal_socketpool_socket_get_connected(self)) { - mp_raise_BrokenPipeError(); - } - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); - mp_int_t ret = common_hal_socketpool_socket_send(self, bufinfo.buf, bufinfo.len); - if (ret == -1) { - mp_raise_BrokenPipeError(); - } - return mp_obj_new_int_from_uint(ret); + + int backlog = mp_obj_get_int(backlog_in); + + common_hal_socketpool_socket_listen(self, backlog); + return mp_const_none; } -STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_send); +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_listen_obj, socketpool_socket_listen); + +//| def recvfrom_into(self, buffer: WriteableBuffer) -> Tuple[int, Tuple[str, int]]: +//| """Reads some bytes from a remote address. +//| +//| Returns a tuple containing +//| * the number of bytes received into the given buffer +//| * a remote_address, which is a tuple of ip address and port number +//| +//| :param object buffer: buffer to read into""" +//| ... +//| +STATIC mp_obj_t socketpool_socket_recvfrom_into(mp_obj_t self_in, mp_obj_t data_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(data_in, &bufinfo, MP_BUFFER_WRITE); + + byte ip[4]; + mp_uint_t port; + mp_int_t ret = common_hal_socketpool_socket_recvfrom_into(self, + (byte*)bufinfo.buf, bufinfo.len, ip, &port); + mp_obj_t tuple_contents[2]; + tuple_contents[0] = mp_obj_new_int_from_uint(ret); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_recvfrom_into_obj, socketpool_socket_recvfrom_into); //| def recv_into(self, buffer: WriteableBuffer, bufsize: int) -> int: //| """Reads some bytes from the connected remote address, writing @@ -199,7 +205,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_s //| :param int bufsize: optionally, a maximum number of bytes to read.""" //| ... //| - STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(args[0]); if (common_hal_socketpool_socket_get_closed(self)) { @@ -232,6 +237,32 @@ STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket_recv_into_obj, 2, 3, socketpool_socket_recv_into); +//| def send(self, bytes: ReadableBuffer) -> int: +//| """Send some bytes to the connected remote address. +//| Suits sockets of type SOCK_STREAM +//| +//| :param ~bytes bytes: some bytes to send""" +//| ... +//| +STATIC mp_obj_t socketpool_socket_send(mp_obj_t self_in, mp_obj_t buf_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + if (common_hal_socketpool_socket_get_closed(self)) { + // Bad file number. + mp_raise_OSError(MP_EBADF); + } + if (!common_hal_socketpool_socket_get_connected(self)) { + mp_raise_BrokenPipeError(); + } + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); + mp_int_t ret = common_hal_socketpool_socket_send(self, bufinfo.buf, bufinfo.len); + if (ret == -1) { + mp_raise_BrokenPipeError(); + } + return mp_obj_new_int_from_uint(ret); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_send); + //| def sendto(self, bytes: ReadableBuffer, address: Tuple[str, int]) -> int: //| """Send some bytes to a specific address. //| Suits sockets of type SOCK_DGRAM @@ -240,7 +271,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket_recv_into_obj, 2, 3 //| :param ~tuple address: tuple of (remote_address, remote_port)""" //| ... //| - STATIC mp_obj_t socketpool_socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_obj_t addr_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -254,8 +284,11 @@ STATIC mp_obj_t socketpool_socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_ size_t hostlen; const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } - mp_int_t ret = common_hal_socketpool_socket_sendto(self, host, hostlen, port, bufinfo.buf, bufinfo.len); + mp_int_t ret = common_hal_socketpool_socket_sendto(self, host, hostlen, (uint32_t)port, bufinfo.buf, bufinfo.len); if (!ret) { mp_raise_OSError(0); } @@ -264,37 +297,28 @@ STATIC mp_obj_t socketpool_socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_ } STATIC MP_DEFINE_CONST_FUN_OBJ_3(socketpool_socket_sendto_obj, socketpool_socket_sendto); -//| def recvfrom_into(self, buffer: WriteableBuffer) -> Tuple[int, Tuple[str, int]]: -//| """Reads some bytes from a remote address. +//| def setblocking(self, flag: bool) -> Optional[int]: +//| """Set the blocking behaviour of this socket. //| -//| Returns a tuple containing -//| * the number of bytes received into the given buffer -//| * a remote_address, which is a tuple of ip address and port number -//| -//| :param object buffer: buffer to read into""" +//| :param ~bool flag: False means non-blocking, True means block indefinitely.""" //| ... //| -STATIC mp_obj_t socketpool_socket_recvfrom_into(mp_obj_t self_in, mp_obj_t data_in) { +// method socket.setblocking(flag) +STATIC mp_obj_t socketpool_socket_setblocking(mp_obj_t self_in, mp_obj_t blocking) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(data_in, &bufinfo, MP_BUFFER_WRITE); - - byte ip[4]; - mp_uint_t port; - mp_int_t ret = common_hal_socketpool_socket_recvfrom_into(self, - (byte*)bufinfo.buf, bufinfo.len, ip, &port); - mp_obj_t tuple_contents[2]; - tuple_contents[0] = mp_obj_new_int_from_uint(ret); - tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); - return mp_obj_new_tuple(2, tuple_contents); + if (mp_obj_is_true(blocking)) { + common_hal_socketpool_socket_settimeout(self, -1); + } else { + common_hal_socketpool_socket_settimeout(self, 0); + } + return mp_const_none; } -STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_recvfrom_into_obj, socketpool_socket_recvfrom_into); +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_setblocking_obj, socketpool_socket_setblocking); // //| def setsockopt(self, level: int, optname: int, value: int) -> None: // //| """Sets socket options""" // //| ... // //| - // STATIC mp_obj_t socketpool_socket_setsockopt(size_t n_args, const mp_obj_t *args) { // // mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(args[0]); @@ -324,13 +348,13 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_recvfrom_into_obj, socketpool // } // STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket_setsockopt_obj, 4, 4, socketpool_socket_setsockopt); + //| def settimeout(self, value: int) -> None: //| """Set the timeout value for this socket. //| //| :param ~int value: timeout in seconds. 0 means non-blocking. None means block indefinitely.""" //| ... //| - STATIC mp_obj_t socketpool_socket_settimeout(mp_obj_t self_in, mp_obj_t timeout_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); mp_uint_t timeout_ms; @@ -348,24 +372,6 @@ STATIC mp_obj_t socketpool_socket_settimeout(mp_obj_t self_in, mp_obj_t timeout_ } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_settimeout_obj, socketpool_socket_settimeout); -// //| def setblocking(self, flag: bool) -> Optional[int]: -// //| """Set the blocking behaviour of this socket. -// //| -// //| :param ~bool flag: False means non-blocking, True means block indefinitely.""" -// //| ... -// //| - -// // method socket.setblocking(flag) -// STATIC mp_obj_t socketpool_socket_setblocking(mp_obj_t self_in, mp_obj_t blocking) { -// // if (mp_obj_is_true(blocking)) { -// // return socket_settimeout(self_in, mp_const_none); -// // } else { -// // return socket_settimeout(self_in, MP_OBJ_NEW_SMALL_INT(0)); -// // } -// return mp_const_none; -// } -// STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_setblocking_obj, socketpool_socket_setblocking); - //| def __hash__(self) -> int: //| """Returns a hash for the Socket.""" //| ... @@ -373,7 +379,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_settimeout_obj, socketpool_so STATIC mp_obj_t socketpool_socket_unary_op(mp_unary_op_t op, mp_obj_t self_in) { switch (op) { case MP_UNARY_OP_HASH: { - return MP_OBJ_NEW_SMALL_INT(common_hal_socketpool_socket_get_hash(MP_OBJ_TO_PTR(self_in))); + return mp_obj_id(self_in); } default: return MP_OBJ_NULL; // op not supported @@ -384,19 +390,19 @@ STATIC const mp_rom_map_elem_t socketpool_socket_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&socketpool_socket___exit___obj) }, { MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&socketpool_socket_close_obj) }, - { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&socketpool_socket_close_obj) }, - { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&socketpool_socket_bind_obj) }, - { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&socketpool_socket_listen_obj) }, { MP_ROM_QSTR(MP_QSTR_accept), MP_ROM_PTR(&socketpool_socket_accept_obj) }, + { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&socketpool_socket_bind_obj) }, + { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&socketpool_socket_close_obj) }, { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&socketpool_socket_connect_obj) }, - { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&socketpool_socket_send_obj) }, - { MP_ROM_QSTR(MP_QSTR_sendto), MP_ROM_PTR(&socketpool_socket_sendto_obj) }, + { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&socketpool_socket_listen_obj) }, { MP_ROM_QSTR(MP_QSTR_recvfrom_into), MP_ROM_PTR(&socketpool_socket_recvfrom_into_obj) }, { MP_ROM_QSTR(MP_QSTR_recv_into), MP_ROM_PTR(&socketpool_socket_recv_into_obj) }, + { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&socketpool_socket_send_obj) }, + { MP_ROM_QSTR(MP_QSTR_sendto), MP_ROM_PTR(&socketpool_socket_sendto_obj) }, + { MP_ROM_QSTR(MP_QSTR_setblocking), MP_ROM_PTR(&socketpool_socket_setblocking_obj) }, // { MP_ROM_QSTR(MP_QSTR_setsockopt), MP_ROM_PTR(&socketpool_socket_setsockopt_obj) }, { MP_ROM_QSTR(MP_QSTR_settimeout), MP_ROM_PTR(&socketpool_socket_settimeout_obj) }, - // { MP_ROM_QSTR(MP_QSTR_setblocking), MP_ROM_PTR(&socketpool_socket_setblocking_obj) }, }; STATIC MP_DEFINE_CONST_DICT(socketpool_socket_locals_dict, socketpool_socket_locals_dict_table); diff --git a/shared-bindings/socketpool/Socket.h b/shared-bindings/socketpool/Socket.h index b5dceb50f4..27173c8b3f 100644 --- a/shared-bindings/socketpool/Socket.h +++ b/shared-bindings/socketpool/Socket.h @@ -31,22 +31,20 @@ extern const mp_obj_type_t socketpool_socket_type; -void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, mp_uint_t timeout_ms); - -bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint8_t port); -bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog); -socketpool_socket_obj_t * common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, uint8_t* ip, uint *port); - -bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const char* host, size_t hostlen, mp_int_t port); -mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len); -mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len); -mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, - const char* host, size_t hostlen, uint8_t port, const uint8_t* buf, mp_uint_t len); -mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, - uint8_t* buf, mp_uint_t len, uint8_t* ip, uint *port); +socketpool_socket_obj_t * common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, uint8_t* ip, uint32_t *port); +bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint32_t port); void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self); +bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint32_t port); bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self); bool common_hal_socketpool_socket_get_connected(socketpool_socket_obj_t* self); -mp_uint_t common_hal_socketpool_socket_get_hash(socketpool_socket_obj_t* self); +mp_uint_t common_hal_socketpool_socket_get_timeout(socketpool_socket_obj_t* self); +bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog); +mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, + uint8_t* buf, uint32_t len, uint8_t* ip, uint32_t *port); +mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len); +mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len); +mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port, const uint8_t* buf, uint32_t len); +void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, uint32_t timeout_ms); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_SOCKETPOOL_SOCKET_H diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index 8f4069faad..6ff6d5f98d 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -3,8 +3,7 @@ * * The MIT License (MIT) * - * SPDX-FileCopyrightText: Copyright (c) 2014 Damien P. George - * 2018 Nick Moore for Adafruit Industries + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal diff --git a/shared-bindings/ssl/SSLContext.c b/shared-bindings/ssl/SSLContext.c index 9d4df72619..44e9e6bbf8 100644 --- a/shared-bindings/ssl/SSLContext.c +++ b/shared-bindings/ssl/SSLContext.c @@ -51,7 +51,7 @@ STATIC mp_obj_t ssl_sslcontext_make_new(const mp_obj_type_t *type, size_t n_args return MP_OBJ_FROM_PTR(s); } -//| def wrap_socket(sock: socketpool.Socket, *, server_side: bool = False, server_hostname: Optional[str] = None) -> socketpool.Socket: +//| def wrap_socket(sock: socketpool.Socket, *, server_side: bool = False, server_hostname: Optional[str] = None) -> ssl.SSLSocket: //| """Wraps the socket into a socket-compatible class that handles SSL negotiation. //| The socket must be of type SOCK_STREAM.""" //| ... diff --git a/shared-bindings/ssl/SSLContext.h b/shared-bindings/ssl/SSLContext.h index f7f985af70..ad4d7e6a8c 100644 --- a/shared-bindings/ssl/SSLContext.h +++ b/shared-bindings/ssl/SSLContext.h @@ -30,12 +30,13 @@ #include "common-hal/ssl/SSLContext.h" #include "shared-bindings/socketpool/Socket.h" +#include "shared-bindings/ssl/SSLSocket.h" extern const mp_obj_type_t ssl_sslcontext_type; void common_hal_ssl_sslcontext_construct(ssl_sslcontext_obj_t* self); -socketpool_socket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, +ssl_sslsocket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, socketpool_socket_obj_t* sock, bool server_side, const char* server_hostname); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLCONTEXT_H diff --git a/shared-bindings/ssl/SSLSocket.c b/shared-bindings/ssl/SSLSocket.c new file mode 100644 index 0000000000..0daa930ef7 --- /dev/null +++ b/shared-bindings/ssl/SSLSocket.c @@ -0,0 +1,326 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/ssl/SSLSocket.h" + +#include +#include + +#include "lib/utils/context_manager_helpers.h" +#include "py/objtuple.h" +#include "py/objlist.h" +#include "py/runtime.h" +#include "py/mperrno.h" + +#include "lib/netutils/netutils.h" + +//| class SSLSocket: +//| """Implements TLS security on a subset of `socketpool.Socket` functions. Cannot be created +//| directly. Instead, call `wrap_socket` on an existing socket object. +//| +//| Provides a subset of CPython's `ssl.SSLSocket` API. It only implements the versions of +//| recv that do not allocate bytes objects.""" +//| + +//| def __enter__(self) -> SSLSocket: +//| """No-op used by Context Managers.""" +//| ... +//| +// Provided by context manager helper. + +//| def __exit__(self) -> None: +//| """Automatically closes the Socket when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket___exit__(size_t n_args, const mp_obj_t *args) { + (void)n_args; + common_hal_ssl_sslsocket_close(args[0]); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ssl_sslsocket___exit___obj, 4, 4, ssl_sslsocket___exit__); + +//| def accept(self) -> Tuple[SSLSocket, Tuple[str, int]]: +//| """Accept a connection on a listening socket of type SOCK_STREAM, +//| creating a new socket of type SOCK_STREAM. +//| Returns a tuple of (new_socket, remote_address)""" +//| +STATIC mp_obj_t ssl_sslsocket_accept(mp_obj_t self_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + uint8_t ip[4]; + uint32_t port; + + ssl_sslsocket_obj_t * sslsock = common_hal_ssl_sslsocket_accept(self, ip, &port); + + mp_obj_t tuple_contents[2]; + tuple_contents[0] = MP_OBJ_FROM_PTR(sslsock); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(ssl_sslsocket_accept_obj, ssl_sslsocket_accept); + +//| def bind(self, address: Tuple[str, int]) -> None: +//| """Bind a socket to an address +//| +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_bind(mp_obj_t self_in, mp_obj_t addr_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + mp_obj_t *addr_items; + mp_obj_get_array_fixed_n(addr_in, 2, &addr_items); + + size_t hostlen; + const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); + mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } + + bool ok = common_hal_ssl_sslsocket_bind(self, host, hostlen, (uint32_t)port); + if (!ok) { + mp_raise_ValueError(translate("Error: Failure to bind")); + } + + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_bind_obj, ssl_sslsocket_bind); + +//| def close(self) -> None: +//| """Closes this Socket""" +//| +STATIC mp_obj_t ssl_sslsocket_close(mp_obj_t self_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + common_hal_ssl_sslsocket_close(self); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(ssl_sslsocket_close_obj, ssl_sslsocket_close); + +//| def connect(self, address: Tuple[str, int]) -> None: +//| """Connect a socket to a remote address +//| +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_connect(mp_obj_t self_in, mp_obj_t addr_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + mp_obj_t *addr_items; + mp_obj_get_array_fixed_n(addr_in, 2, &addr_items); + + size_t hostlen; + const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); + mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } + + bool ok = common_hal_ssl_sslsocket_connect(self, host, hostlen, (uint32_t)port); + if (!ok) { + mp_raise_OSError(0); + } + + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_connect_obj, ssl_sslsocket_connect); + +//| def listen(self, backlog: int) -> None: +//| """Set socket to listen for incoming connections +//| +//| :param ~int backlog: length of backlog queue for waiting connetions""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + int backlog = mp_obj_get_int(backlog_in); + + common_hal_ssl_sslsocket_listen(self, backlog); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_listen_obj, ssl_sslsocket_listen); + +//| def recv_into(self, buffer: WriteableBuffer, bufsize: int) -> int: +//| """Reads some bytes from the connected remote address, writing +//| into the provided buffer. If bufsize <= len(buffer) is given, +//| a maximum of bufsize bytes will be read into the buffer. If no +//| valid value is given for bufsize, the default is the length of +//| the given buffer. +//| +//| Suits sockets of type SOCK_STREAM +//| Returns an int of number of bytes read. +//| +//| :param bytearray buffer: buffer to receive into +//| :param int bufsize: optionally, a maximum number of bytes to read.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_recv_into(size_t n_args, const mp_obj_t *args) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(args[0]); + if (common_hal_ssl_sslsocket_get_closed(self)) { + // Bad file number. + mp_raise_OSError(MP_EBADF); + } + // if (!common_hal_ssl_sslsocket_get_connected(self)) { + // // not connected + // mp_raise_OSError(MP_ENOTCONN); + // } + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(args[1], &bufinfo, MP_BUFFER_WRITE); + mp_int_t len = bufinfo.len; + if (n_args == 3) { + mp_int_t given_len = mp_obj_get_int(args[2]); + if (given_len > len) { + mp_raise_ValueError(translate("buffer too small for requested bytes")); + } + if (given_len > 0 && given_len < len) { + len = given_len; + } + } + + if (len == 0) { + return MP_OBJ_NEW_SMALL_INT(0); + } + + mp_int_t ret = common_hal_ssl_sslsocket_recv_into(self, (byte*)bufinfo.buf, len); + return mp_obj_new_int_from_uint(ret); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ssl_sslsocket_recv_into_obj, 2, 3, ssl_sslsocket_recv_into); + +//| def send(self, bytes: ReadableBuffer) -> int: +//| """Send some bytes to the connected remote address. +//| Suits sockets of type SOCK_STREAM +//| +//| :param ~bytes bytes: some bytes to send""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_send(mp_obj_t self_in, mp_obj_t buf_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + if (common_hal_ssl_sslsocket_get_closed(self)) { + // Bad file number. + mp_raise_OSError(MP_EBADF); + } + if (!common_hal_ssl_sslsocket_get_connected(self)) { + mp_raise_BrokenPipeError(); + } + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); + mp_int_t ret = common_hal_ssl_sslsocket_send(self, bufinfo.buf, bufinfo.len); + if (ret == -1) { + mp_raise_BrokenPipeError(); + } + return mp_obj_new_int_from_uint(ret); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_send_obj, ssl_sslsocket_send); + +// //| def setsockopt(self, level: int, optname: int, value: int) -> None: +// //| """Sets socket options""" +// //| ... +// //| +// STATIC mp_obj_t ssl_sslsocket_setsockopt(size_t n_args, const mp_obj_t *args) { +// } +// STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ssl_sslsocket_setsockopt_obj, 4, 4, ssl_sslsocket_setsockopt); + +//| def settimeout(self, value: int) -> None: +//| """Set the timeout value for this socket. +//| +//| :param ~int value: timeout in seconds. 0 means non-blocking. None means block indefinitely.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_settimeout(mp_obj_t self_in, mp_obj_t timeout_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + mp_uint_t timeout_ms; + if (timeout_in == mp_const_none) { + timeout_ms = -1; + } else { + #if MICROPY_PY_BUILTINS_FLOAT + timeout_ms = 1000 * mp_obj_get_float(timeout_in); + #else + timeout_ms = 1000 * mp_obj_get_int(timeout_in); + #endif + } + common_hal_ssl_sslsocket_settimeout(self, timeout_ms); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_settimeout_obj, ssl_sslsocket_settimeout); + +//| def setblocking(self, flag: bool) -> Optional[int]: +//| """Set the blocking behaviour of this socket. +//| +//| :param ~bool flag: False means non-blocking, True means block indefinitely.""" +//| ... +//| +// method socket.setblocking(flag) +STATIC mp_obj_t ssl_sslsocket_setblocking(mp_obj_t self_in, mp_obj_t blocking) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + if (mp_obj_is_true(blocking)) { + common_hal_ssl_sslsocket_settimeout(self, -1); + } else { + common_hal_ssl_sslsocket_settimeout(self, 0); + } + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_setblocking_obj, ssl_sslsocket_setblocking); + +//| def __hash__(self) -> int: +//| """Returns a hash for the Socket.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_unary_op(mp_unary_op_t op, mp_obj_t self_in) { + switch (op) { + case MP_UNARY_OP_HASH: { + return mp_obj_id(self_in); + } + default: + return MP_OBJ_NULL; // op not supported + } +} + +STATIC const mp_rom_map_elem_t ssl_sslsocket_locals_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, + { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&ssl_sslsocket___exit___obj) }, + { MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&ssl_sslsocket_close_obj) }, + + { MP_ROM_QSTR(MP_QSTR_accept), MP_ROM_PTR(&ssl_sslsocket_accept_obj) }, + { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&ssl_sslsocket_bind_obj) }, + { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&ssl_sslsocket_close_obj) }, + { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&ssl_sslsocket_connect_obj) }, + { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&ssl_sslsocket_listen_obj) }, + { MP_ROM_QSTR(MP_QSTR_recv_into), MP_ROM_PTR(&ssl_sslsocket_recv_into_obj) }, + { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&ssl_sslsocket_send_obj) }, + { MP_ROM_QSTR(MP_QSTR_setblocking), MP_ROM_PTR(&ssl_sslsocket_setblocking_obj) }, + // { MP_ROM_QSTR(MP_QSTR_setsockopt), MP_ROM_PTR(&ssl_sslsocket_setsockopt_obj) }, + { MP_ROM_QSTR(MP_QSTR_settimeout), MP_ROM_PTR(&ssl_sslsocket_settimeout_obj) }, +}; + +STATIC MP_DEFINE_CONST_DICT(ssl_sslsocket_locals_dict, ssl_sslsocket_locals_dict_table); + +const mp_obj_type_t ssl_sslsocket_type = { + { &mp_type_type }, + .name = MP_QSTR_SSLSocket, + .locals_dict = (mp_obj_dict_t*)&ssl_sslsocket_locals_dict, + .unary_op = ssl_sslsocket_unary_op, +}; diff --git a/shared-bindings/ssl/SSLSocket.h b/shared-bindings/ssl/SSLSocket.h new file mode 100644 index 0000000000..d117e5dca2 --- /dev/null +++ b/shared-bindings/ssl/SSLSocket.h @@ -0,0 +1,45 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLSOCKET_H +#define MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLSOCKET_H + +#include "common-hal/ssl/SSLSocket.h" + +extern const mp_obj_type_t ssl_sslsocket_type; + +ssl_sslsocket_obj_t * common_hal_ssl_sslsocket_accept(ssl_sslsocket_obj_t* self, uint8_t* ip, uint32_t *port); +bool common_hal_ssl_sslsocket_bind(ssl_sslsocket_obj_t* self, const char* host, size_t hostlen, uint32_t port); +void common_hal_ssl_sslsocket_close(ssl_sslsocket_obj_t* self); +bool common_hal_ssl_sslsocket_connect(ssl_sslsocket_obj_t* self, const char* host, size_t hostlen, uint32_t port); +bool common_hal_ssl_sslsocket_get_closed(ssl_sslsocket_obj_t* self); +bool common_hal_ssl_sslsocket_get_connected(ssl_sslsocket_obj_t* self); +bool common_hal_ssl_sslsocket_listen(ssl_sslsocket_obj_t* self, int backlog); +mp_uint_t common_hal_ssl_sslsocket_recv_into(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len); +mp_uint_t common_hal_ssl_sslsocket_send(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len); +void common_hal_ssl_sslsocket_settimeout(ssl_sslsocket_obj_t* self, uint32_t timeout_ms); + +#endif // MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLSOCKET_H diff --git a/shared-bindings/supervisor/Runtime.c b/shared-bindings/supervisor/Runtime.c index cfda620bc0..283c8a1d6c 100755 --- a/shared-bindings/supervisor/Runtime.c +++ b/shared-bindings/supervisor/Runtime.c @@ -60,27 +60,6 @@ STATIC mp_obj_t supervisor_runtime_get_serial_connected(mp_obj_t self){ } MP_DEFINE_CONST_FUN_OBJ_1(supervisor_runtime_get_serial_connected_obj, supervisor_runtime_get_serial_connected); -//| serial2: io.BytesIO -//| """Returns the USB secondary serial communication channel. -//| Raises `NotImplementedError` if it does not exist. -//| """ -//| -STATIC mp_obj_t supervisor_runtime_get_serial2(mp_obj_t self){ -#if CIRCUITPY_USB_SERIAL2 - return mp_obj_new_bool(common_hal_supervisor_runtime_get_serial2()); -#else - mp_raise_NotImplementedError(translate("serial2 not available")); -#endif -} -MP_DEFINE_CONST_FUN_OBJ_1(supervisor_runtime_get_serial2_obj, supervisor_runtime_get_serial2); - -const mp_obj_property_t supervisor_runtime_serial2_connected_obj = { - .base.type = &mp_type_property, - .proxy = {(mp_obj_t)&supervisor_runtime_get_serial2_connected_obj, - (mp_obj_t)&mp_const_none_obj, - (mp_obj_t)&mp_const_none_obj}, -}; - const mp_obj_property_t supervisor_runtime_serial_connected_obj = { .base.type = &mp_type_property, .proxy = {(mp_obj_t)&supervisor_runtime_get_serial_connected_obj, @@ -88,27 +67,6 @@ const mp_obj_property_t supervisor_runtime_serial_connected_obj = { (mp_obj_t)&mp_const_none_obj}, }; -//| serial2_connected: bool -//| """Returns the USB secondary serial communication status (read-only). -//| Raises `NotImplementedError` if there is no secondary serial channel. -//| """ -//| -STATIC mp_obj_t supervisor_runtime_get_serial2_connected(mp_obj_t self){ -#if CIRCUITPY_USB_SERIAL2 - return mp_obj_new_bool(common_hal_supervisor_runtime_get_serial2_connected()); -#else - mp_raise_NotImplementedError(translate("serial2 not available")); -#endif -} -MP_DEFINE_CONST_FUN_OBJ_1(supervisor_runtime_get_serial2_connected_obj, supervisor_runtime_get_serial2_connected); - -const mp_obj_property_t supervisor_runtime_serial2_connected_obj = { - .base.type = &mp_type_property, - .proxy = {(mp_obj_t)&supervisor_runtime_get_serial2_connected_obj, - (mp_obj_t)&mp_const_none_obj, - (mp_obj_t)&mp_const_none_obj}, -}; - //| serial_bytes_available: int //| """Returns the whether any bytes are available to read //| on the USB serial input. Allows for polling to see whether @@ -126,30 +84,6 @@ const mp_obj_property_t supervisor_runtime_serial_bytes_available_obj = { (mp_obj_t)&mp_const_none_obj}, }; - -//| serial2_bytes_available: int -//| """Returns the whether any bytes are available to read -//| on the secondary USB serial input (read-only). -//| Raises `NotImplementedError` if there is no secondary serial input. -//| """ -//| -STATIC mp_obj_t supervisor_runtime_get_serial2_bytes_available(mp_obj_t self){ -#if CIRCUITPY_USB_SERIAL2 - return mp_obj_new_bool(common_hal_supervisor_runtime_get_serial2_bytes_available()); -#else - mp_raise_NotImplementedError(translate("serial2 not available")); -#endif -} -MP_DEFINE_CONST_FUN_OBJ_1(supervisor_runtime_get_serial2_bytes_available_obj, supervisor_runtime_get_serial2_bytes_available); - -const mp_obj_property_t supervisor_runtime_serial2_bytes_available_obj = { - .base.type = &mp_type_property, - .proxy = {(mp_obj_t)&supervisor_runtime_get_serial2_bytes_available_obj, - (mp_obj_t)&mp_const_none_obj, - (mp_obj_t)&mp_const_none_obj}, -}; - - //| run_reason: RunReason //| """Returns why CircuitPython started running this particular time.""" //| @@ -165,15 +99,13 @@ const mp_obj_property_t supervisor_runtime_run_reason_obj = { (mp_obj_t)&mp_const_none_obj}, }; -void supervisor_runtime_set_run_reason(supervisor_runtime_run_reason_t run_reason) { +void supervisor_set_run_reason(supervisor_run_reason_t run_reason) { _run_reason = run_reason; } STATIC const mp_rom_map_elem_t supervisor_runtime_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_serial_connected), MP_ROM_PTR(&supervisor_runtime_serial_connected_obj) }, - { MP_ROM_QSTR(MP_QSTR_serial2_connected), MP_ROM_PTR(&supervisor_runtime_serial2_connected_obj) }, { MP_ROM_QSTR(MP_QSTR_serial_bytes_available), MP_ROM_PTR(&supervisor_runtime_serial_bytes_available_obj) }, - { MP_ROM_QSTR(MP_QSTR_serial2_bytes_available), MP_ROM_PTR(&supervisor_runtime_serial2_bytes_available_obj) }, { MP_ROM_QSTR(MP_QSTR_run_reason), MP_ROM_PTR(&supervisor_runtime_run_reason_obj) }, }; diff --git a/shared-module/adafruit_bus_device/SPIDevice.c b/shared-module/adafruit_bus_device/SPIDevice.c index e489fc7c07..5c1a69b128 100644 --- a/shared-module/adafruit_bus_device/SPIDevice.c +++ b/shared-module/adafruit_bus_device/SPIDevice.c @@ -41,7 +41,7 @@ void common_hal_adafruit_bus_device_spidevice_construct(adafruit_bus_device_spid self->chip_select = cs; } -void common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self) { +mp_obj_t common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self) { bool success = false; while (!success) { success = common_hal_busio_spi_try_lock(self->spi); @@ -54,6 +54,7 @@ void common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevic if (self->chip_select != MP_OBJ_NULL) { common_hal_digitalio_digitalinout_set_value(MP_OBJ_TO_PTR(self->chip_select), false); } + return self->spi; } void common_hal_adafruit_bus_device_spidevice_exit(adafruit_bus_device_spidevice_obj_t *self) { @@ -83,3 +84,7 @@ void common_hal_adafruit_bus_device_spidevice_exit(adafruit_bus_device_spidevice common_hal_busio_spi_unlock(self->spi); } + +mp_obj_t common_hal_adafruit_bus_device_spidevice_get_spi(adafruit_bus_device_spidevice_obj_t *self) { + return self->spi; +} diff --git a/supervisor/shared/background_callback.c b/supervisor/shared/background_callback.c index 288c9a4df2..68a0a9667d 100644 --- a/supervisor/shared/background_callback.c +++ b/supervisor/shared/background_callback.c @@ -33,7 +33,7 @@ #include "supervisor/shared/tick.h" #include "shared-bindings/microcontroller/__init__.h" -STATIC volatile background_callback_t *callback_head, *callback_tail; +STATIC volatile background_callback_t * volatile callback_head, * volatile callback_tail; #define CALLBACK_CRITICAL_BEGIN (common_hal_mcu_disable_interrupts()) #define CALLBACK_CRITICAL_END (common_hal_mcu_enable_interrupts()) @@ -50,7 +50,6 @@ void background_callback_add_core(background_callback_t *cb) { cb->prev = (background_callback_t*)callback_tail; if (callback_tail) { callback_tail->next = cb; - cb->prev = (background_callback_t*)callback_tail; } if (!callback_head) { callback_head = cb; diff --git a/supervisor/shared/serial.c b/supervisor/shared/serial.c index 6199af379e..40151cbf68 100644 --- a/supervisor/shared/serial.c +++ b/supervisor/shared/serial.c @@ -47,6 +47,10 @@ busio_uart_obj_t debug_uart; byte buf_array[64]; #endif +#if CIRCUITPY_USB_VENDOR +bool tud_vendor_connected(void); +#endif + void serial_early_init(void) { #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) debug_uart.base.type = &busio_uart_type; @@ -66,6 +70,12 @@ void serial_init(void) { } bool serial_connected(void) { +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected()) { + return true; + } +#endif + #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) return true; #else @@ -74,6 +84,14 @@ bool serial_connected(void) { } char serial_read(void) { +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected() && tud_vendor_available() > 0) { + char tiny_buffer; + tud_vendor_read(&tiny_buffer, 1); + return tiny_buffer; + } +#endif + #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) if (tud_cdc_connected() && tud_cdc_available() > 0) { return (char) tud_cdc_read_char(); @@ -88,6 +106,12 @@ char serial_read(void) { } bool serial_bytes_available(void) { +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected() && tud_vendor_available() > 0) { + return true; + } +#endif + #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) return common_hal_busio_uart_rx_characters_available(&debug_uart) || (tud_cdc_available() > 0); #else @@ -103,6 +127,12 @@ void serial_write_substring(const char* text, uint32_t length) { common_hal_terminalio_terminal_write(&supervisor_terminal, (const uint8_t*) text, length, &errcode); #endif +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected()) { + tud_vendor_write(text, length); + } +#endif + uint32_t count = 0; while (count < length && tud_cdc_connected()) { count += tud_cdc_write(text + count, length - count); diff --git a/supervisor/shared/usb/tusb_config.h b/supervisor/shared/usb/tusb_config.h index 0e70367d0c..bff7bd6b55 100644 --- a/supervisor/shared/usb/tusb_config.h +++ b/supervisor/shared/usb/tusb_config.h @@ -73,6 +73,7 @@ #define CFG_TUD_MSC 1 #define CFG_TUD_HID CIRCUITPY_USB_HID #define CFG_TUD_MIDI CIRCUITPY_USB_MIDI +#define CFG_TUD_VENDOR CIRCUITPY_USB_VENDOR #define CFG_TUD_CUSTOM_CLASS 0 /*------------------------------------------------------------------*/ diff --git a/supervisor/shared/usb/usb.c b/supervisor/shared/usb/usb.c index 07c6aee6c1..43564d5d5c 100644 --- a/supervisor/shared/usb/usb.c +++ b/supervisor/shared/usb/usb.c @@ -37,6 +37,19 @@ #include "tusb.h" +#if CIRCUITPY_USB_VENDOR +#include "genhdr/autogen_usb_descriptor.h" + +// The WebUSB support being conditionally added to this file is based on the +// tinyusb demo examples/device/webusb_serial. + +extern const tusb_desc_webusb_url_t desc_webusb_url; + +static bool web_serial_connected = false; +#endif + + + // Serial number as hex characters. This writes directly to the USB // descriptor. extern uint16_t usb_serial_number[1 + COMMON_HAL_MCU_PROCESSOR_UID_LENGTH * 2]; @@ -98,9 +111,14 @@ static void usb_background_do(void* unused) { usb_background(); } +void usb_background_schedule(void) +{ + background_callback_add(&usb_callback, usb_background_do, NULL); +} + void usb_irq_handler(void) { tud_int_handler(0); - background_callback_add(&usb_callback, usb_background_do, NULL); + usb_background_schedule(); } //--------------------------------------------------------------------+ @@ -145,6 +163,62 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { } } +#if CIRCUITPY_USB_VENDOR +//--------------------------------------------------------------------+ +// WebUSB use vendor class +//--------------------------------------------------------------------+ + +bool tud_vendor_connected(void) +{ + return web_serial_connected; +} + +// Invoked when a control transfer occurred on an interface of this class +// Driver response accordingly to the request and the transfer stage (setup/data/ack) +// return false to stall control endpoint (e.g unsupported request) +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) +{ + // nothing to with DATA & ACK stage + if (stage != CONTROL_STAGE_SETUP ) return true; + + switch (request->bRequest) + { + case VENDOR_REQUEST_WEBUSB: + // match vendor request in BOS descriptor + // Get landing page url + return tud_control_xfer(rhport, request, (void*) &desc_webusb_url, desc_webusb_url.bLength); + + case VENDOR_REQUEST_MICROSOFT: + if ( request->wIndex == 7 ) + { + // Get Microsoft OS 2.0 compatible descriptor + uint16_t total_len; + memcpy(&total_len, desc_ms_os_20+8, 2); + + return tud_control_xfer(rhport, request, (void*) desc_ms_os_20, total_len); + } else + { + return false; + } + + case 0x22: + // Webserial simulate the CDC_REQUEST_SET_CONTROL_LINE_STATE (0x22) to + // connect and disconnect. + web_serial_connected = (request->wValue != 0); + + // response with status OK + return tud_control_status(rhport, request); + + default: + // stall unknown request + return false; + } + + return true; +} +#endif CIRCUITPY_USB_VENDOR + + #if MICROPY_KBD_EXCEPTION /** diff --git a/supervisor/shared/usb/usb_desc.c b/supervisor/shared/usb/usb_desc.c index 080187ebc5..419a70ab30 100644 --- a/supervisor/shared/usb/usb_desc.c +++ b/supervisor/shared/usb/usb_desc.c @@ -43,12 +43,14 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { return usb_desc_cfg; } +#if CIRCUITPY_USB_HID // Invoked when received GET HID REPORT DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_hid_descriptor_report_cb(void) { return hid_report_descriptor; } +#endif // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete diff --git a/supervisor/supervisor.mk b/supervisor/supervisor.mk index 8fd32fa0b5..b36b9bc00b 100644 --- a/supervisor/supervisor.mk +++ b/supervisor/supervisor.mk @@ -22,7 +22,7 @@ CFLAGS += -DINTERNAL_FLASH_FILESYSTEM=$(INTERNAL_FLASH_FILESYSTEM) QSPI_FLASH_FILESYSTEM ?= 0 CFLAGS += -DQSPI_FLASH_FILESYSTEM=$(QSPI_FLASH_FILESYSTEM) -SPI_FLASH_FILESYSTEM = 0 +SPI_FLASH_FILESYSTEM ?= 0 CFLAGS += -DSPI_FLASH_FILESYSTEM=$(SPI_FLASH_FILESYSTEM) ifeq ($(CIRCUITPY_BLEIO),1) @@ -94,6 +94,11 @@ else shared-module/usb_midi/PortOut.c endif + ifeq ($(CIRCUITPY_USB_VENDOR), 1) + SRC_SUPERVISOR += \ + lib/tinyusb/src/class/vendor/vendor_device.c + endif + CFLAGS += -DUSB_AVAILABLE endif @@ -117,10 +122,10 @@ CFLAGS += -DUSB_MANUFACTURER=$(USB_MANUFACTURER) CFLAGS += -DUSB_PRODUCT=$(USB_PRODUCT) endif -USB_DEVICES = -ifeq ($(CIRCUITPY_USB_HID),1) -USB_DEVICES += HID -endif +# In the following URL, don't include the https:// prefix. +# It gets added automatically. +USB_WEBUSB_URL ?= "circuitpython.org" + ifeq ($(CIRCUITPY_USB_MIDI),1) USB_DEVICES += AUDIO endif @@ -135,6 +140,9 @@ ifeq ($(CIRCUITPY_USB_SERIAL2),1) CFLAGS += -DCFG_TUD_CDC=2 USB_DEVICES += CDC2 endif +ifeq ($(CIRCUITPY_USB_VENDOR),1) +USB_DEVICES += VENDOR +endif USB_HID_DEVICES = ifeq ($(CIRCUITPY_USB_HID_CONSUMER),1) @@ -163,7 +171,7 @@ endif ifeq ($(CIRCUITPY_USB_HID_RAW),1) ifneq ($(CIRCUITPY_USB_HID_DEVICES,) $(error HID RAW must not be combined with other HID devices) - endif +endif USB_HID_DEVICES += MOUSE endif @@ -202,6 +210,12 @@ USB_DESCRIPTOR_ARGS = \ --output_c_file $(BUILD)/autogen_usb_descriptor.c\ --output_h_file $(BUILD)/genhdr/autogen_usb_descriptor.h +ifeq ($(CIRCUITPY_USB_VENDOR), 1) +USB_DESCRIPTOR_ARGS += \ + --vendor_ep_num_out 0 --vendor_ep_num_in 0 \ + --webusb_url $(USB_WEBUSB_URL) +endif + ifeq ($(USB_RENUMBER_ENDPOINTS), 0) USB_DESCRIPTOR_ARGS += --no-renumber_endpoints endif diff --git a/supervisor/usb.h b/supervisor/usb.h index ccb35470cd..1c709926a7 100644 --- a/supervisor/usb.h +++ b/supervisor/usb.h @@ -35,6 +35,9 @@ // it may be necessary to call it directly. void usb_background(void); +// Schedule usb background +void usb_background_schedule(void); + // Ports must call this from their particular USB IRQ handler void usb_irq_handler(void); diff --git a/tools/gen_display_resources.py b/tools/gen_display_resources.py index 6657b6a272..141e6ee2a1 100644 --- a/tools/gen_display_resources.py +++ b/tools/gen_display_resources.py @@ -8,8 +8,8 @@ import os import struct import sys -sys.path.append("bitmap_font") -sys.path.append("../../tools/bitmap_font") +sys.path.insert(0, "bitmap_font") +sys.path.insert(0, "../../tools/bitmap_font") from adafruit_bitmap_font import bitmap_font diff --git a/tools/gen_usb_descriptor.py b/tools/gen_usb_descriptor.py index 199cdf9cf6..b056f853a7 100644 --- a/tools/gen_usb_descriptor.py +++ b/tools/gen_usb_descriptor.py @@ -13,7 +13,7 @@ from adafruit_usb_descriptor import audio, audio10, cdc, hid, midi, msc, standar import hid_report_descriptors DEFAULT_INTERFACE_NAME = "CircuitPython" -ALL_DEVICES = "CDC CDC2 MSC AUDIO HID" +ALL_DEVICES = "CDC CDC2 MSC AUDIO HID VENDOR" ALL_DEVICES_SET = frozenset(ALL_DEVICES.split()) DEFAULT_DEVICES = "CDC MSC AUDIO HID" @@ -24,6 +24,11 @@ ALL_HID_DEVICES_SET = frozenset(ALL_HID_DEVICES.split()) # Digitizer works on Linux but conflicts with mouse, so omit it. DEFAULT_HID_DEVICES = "KEYBOARD MOUSE CONSUMER GAMEPAD" +# In the following URL, don't include the https:// because that prefix gets added automatically +DEFAULT_WEBUSB_URL = ( + "circuitpython.org" # In the future, this may become a specific landing page +) + parser = argparse.ArgumentParser(description="Generate USB descriptors.") parser.add_argument( "--highspeed", @@ -98,6 +103,18 @@ parser.add_argument( parser.add_argument( "--max_ep", type=int, default=0, help="total number of endpoints available" ) +parser.add_argument( + "--webusb_url", + type=str, + help="The URL to include in the WebUSB URL Descriptor", + default=DEFAULT_WEBUSB_URL, +) +parser.add_argument( + "--vendor_ep_num_out", type=int, default=0, help="endpoint number of VENDOR OUT" +) +parser.add_argument( + "--vendor_ep_num_in", type=int, default=0, help="endpoint number of VENDOR IN" +) parser.add_argument( "--output_c_file", type=argparse.FileType("w", encoding="UTF-8"), required=True ) @@ -120,6 +137,7 @@ include_cdc2 = "CDC2" in args.devices include_msc = "MSC" in args.devices include_hid = "HID" in args.devices include_audio = "AUDIO" in args.devices +include_vendor = "VENDOR" in args.devices if not include_cdc and include_cdc2: raise ValueError("CDC2 requested without CDC") @@ -154,6 +172,12 @@ if not args.renumber_endpoints: elif args.midi_ep_num_in == 0: raise ValueError("MIDI endpoint IN number must not be 0") + if include_vendor: + if args.vendor_ep_num_out == 0: + raise ValueError("VENDOR endpoint OUT number must not be 0") + elif args.vendor_ep_num_in == 0: + raise ValueError("VENDOR endpoint IN number must not be 0") + class StringIndex: """Assign a monotonically increasing index to each unique string. Start with 0.""" @@ -273,7 +297,7 @@ if include_cdc: cdc_comm_interface = make_cdc_comm_interface("CDC", cdc_union) cdc_data_interface = make_cdc_data_interface("CDC") - cdc_interfaces = [cdc_comm_interface, cdc_data_interface] +cdc_interfaces = [cdc_comm_interface, cdc_data_interface] if include_cdc2: cdc2_union = make_cdc_union("CDC2") @@ -472,6 +496,38 @@ if include_audio: + cs_ac_interface.midi_streaming_interfaces ) +if include_vendor: + # Vendor-specific interface, for example WebUSB + vendor_endpoint_in_descriptor = standard.EndpointDescriptor( + description="VENDOR in", + bEndpointAddress=args.vendor_ep_num_in + | standard.EndpointDescriptor.DIRECTION_IN, + bmAttributes=standard.EndpointDescriptor.TYPE_BULK, + bInterval=16, + ) + + vendor_endpoint_out_descriptor = standard.EndpointDescriptor( + description="VENDOR out", + bEndpointAddress=args.vendor_ep_num_out + | standard.EndpointDescriptor.DIRECTION_OUT, + bmAttributes=standard.EndpointDescriptor.TYPE_BULK, + bInterval=16, + ) + + vendor_interface = standard.InterfaceDescriptor( + description="VENDOR", + bInterfaceClass=0xFF, # Vendor-specific + bInterfaceSubClass=0x00, + bInterfaceProtocol=0x00, + iInterface=StringIndex.index("{} VENDOR".format(args.interface_name)), + subdescriptors=[ + vendor_endpoint_in_descriptor, + vendor_endpoint_out_descriptor, + ], + ) + + vendor_interfaces = [vendor_interface] + interfaces_to_join = [] if include_cdc: @@ -489,6 +545,9 @@ if include_hid: if include_audio: interfaces_to_join.append(audio_interfaces) +if include_vendor: + interfaces_to_join.append(vendor_interfaces) + # util.join_interfaces() will renumber the endpoints to make them unique across descriptors, # and renumber the interfaces in order. But we still need to fix up certain # interface cross-references. @@ -502,7 +561,7 @@ if args.max_ep != 0: endpoint_address = getattr(subdescriptor, "bEndpointAddress", 0) & 0x7F if endpoint_address >= args.max_ep: raise ValueError( - "Endpoint address %d of %s must be less than %d" + "Endpoint address %d of '%s' must be less than %d; you have probably run out of endpoints" % (endpoint_address & 0x7F, interface.description, args.max_ep) ) else: @@ -569,6 +628,9 @@ if include_audio: # correct ordering. descriptor_list.append(audio_control_interface) +if include_vendor: + descriptor_list.extend(vendor_interfaces) + # Finally, build the composite descriptor. configuration = standard.ConfigurationDescriptor( @@ -594,6 +656,7 @@ c_file.write( """\ #include +#include "tusb.h" #include "py/objtuple.h" #include "shared-bindings/usb_hid/Device.h" #include "{H_FILE_NAME}" @@ -732,9 +795,12 @@ c_file.write( c_file.write("\n") -hid_descriptor_length = len(bytes(combined_hid_report_descriptor)) +if include_hid: + hid_descriptor_length = len(bytes(combined_hid_report_descriptor)) +else: + hid_descriptor_length = 0 -# Now we values we need for the .h file. +# Now the values we need for the .h file. h_file.write( """\ #ifndef MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H @@ -747,12 +813,8 @@ extern const uint8_t usb_desc_cfg[{configuration_length}]; extern uint16_t usb_serial_number[{serial_number_length}]; extern uint16_t const * const string_desc_arr [{string_descriptor_length}]; -extern const uint8_t hid_report_descriptor[{hid_report_descriptor_length}]; - #define CFG_TUSB_RHPORT0_MODE ({rhport0_mode}) -#define USB_HID_NUM_DEVICES {hid_num_devices} - // Vendor name included in Inquiry response, max 8 bytes #define CFG_TUD_MSC_VENDOR "{msc_vendor}" @@ -765,7 +827,6 @@ extern const uint8_t hid_report_descriptor[{hid_report_descriptor_length}]; configuration_length=descriptor_length, max_configuration_length=max(hid_descriptor_length, descriptor_length), string_descriptor_length=len(pointers_to_strings), - hid_report_descriptor_length=len(bytes(combined_hid_report_descriptor)), rhport0_mode="OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED" if args.highspeed else "OPT_MODE_DEVICE", @@ -775,62 +836,96 @@ extern const uint8_t hid_report_descriptor[{hid_report_descriptor_length}]; ) ) -# Write out the report descriptor and info -c_file.write( - """\ -const uint8_t hid_report_descriptor[{HID_DESCRIPTOR_LENGTH}] = {{ +if include_hid: + h_file.write( + """\ +extern const uint8_t hid_report_descriptor[{hid_report_descriptor_length}]; + +#define USB_HID_NUM_DEVICES {hid_num_devices} """.format( - HID_DESCRIPTOR_LENGTH=hid_descriptor_length + hid_report_descriptor_length=len(bytes(combined_hid_report_descriptor)), ) ) -for b in bytes(combined_hid_report_descriptor): - c_file.write("0x{:02x}, ".format(b)) -c_file.write( +if include_vendor: + h_file.write( + """\ +enum +{ + VENDOR_REQUEST_WEBUSB = 1, + VENDOR_REQUEST_MICROSOFT = 2 +}; + +extern uint8_t const desc_ms_os_20[]; + +// Currently getting compile-time errors in files like tusb_fifo.c +// if we try do define this here (TODO figure this out!) +//extern const tusb_desc_webusb_url_t desc_webusb_url; + +""" + ) + +h_file.write( """\ +#endif // MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H +""" +) + +if include_hid: + # Write out the report descriptor and info + c_file.write( + """\ +const uint8_t hid_report_descriptor[{HID_DESCRIPTOR_LENGTH}] = {{ +""".format(HID_DESCRIPTOR_LENGTH=hid_descriptor_length)) + + for b in bytes(combined_hid_report_descriptor): + c_file.write("0x{:02x}, ".format(b)) + + c_file.write( + """\ }; """ -) - -# Write out USB HID report buffer definitions. -for name in args.hid_devices: - c_file.write( - """\ -static uint8_t {name}_report_buffer[{report_length}]; -""".format( - name=name.lower(), - report_length=hid_report_descriptors.HID_DEVICE_DATA[name].report_length, - ) ) - if hid_report_descriptors.HID_DEVICE_DATA[name].out_report_length > 0: + # Write out USB HID report buffer definitions. + for name in args.hid_devices: c_file.write( """\ -static uint8_t {name}_out_report_buffer[{report_length}]; +static uint8_t {name}_report_buffer[{report_length}]; """.format( name=name.lower(), - report_length=hid_report_descriptors.HID_DEVICE_DATA[ - name - ].out_report_length, + report_length=hid_report_descriptors.HID_DEVICE_DATA[name].report_length, ) ) -# Write out table of device objects. -c_file.write( - """ -usb_hid_device_obj_t usb_hid_devices[] = { -""" -) -for name in args.hid_devices: - device_data = hid_report_descriptors.HID_DEVICE_DATA[name] - out_report_buffer = ( - "{}_out_report_buffer".format(name.lower()) - if device_data.out_report_length > 0 - else "NULL" - ) + if hid_report_descriptors.HID_DEVICE_DATA[name].out_report_length > 0: + c_file.write( + """\ +static uint8_t {name}_out_report_buffer[{report_length}]; +""".format( + name=name.lower(), + report_length=hid_report_descriptors.HID_DEVICE_DATA[ + name + ].out_report_length, + ) + ) + + # Write out table of device objects. c_file.write( """\ +usb_hid_device_obj_t usb_hid_devices[] = { +""" + ) + for name in args.hid_devices: + device_data = hid_report_descriptors.HID_DEVICE_DATA[name] + out_report_buffer = ( + "{}_out_report_buffer".format(name.lower()) + if device_data.out_report_length > 0 + else "NULL" + ) + c_file.write( + """\ {{ .base = {{ .type = &usb_hid_device_type }}, .report_buffer = {name}_report_buffer, @@ -842,24 +937,24 @@ for name in args.hid_devices: .out_report_length = {out_report_length}, }}, """.format( - name=name.lower(), - report_id=report_ids[name], - report_length=device_data.report_length, - usage_page=device_data.usage_page, - usage=device_data.usage, - out_report_buffer=out_report_buffer, - out_report_length=device_data.out_report_length, + name=name.lower(), + report_id=report_ids[name], + report_length=device_data.report_length, + usage_page=device_data.usage_page, + usage=device_data.usage, + out_report_buffer=out_report_buffer, + out_report_length=device_data.out_report_length, + ) ) - ) -c_file.write( - """\ + c_file.write( + """\ }; """ -) + ) -# Write out tuple of device objects. -c_file.write( - """ + # Write out tuple of device objects. + c_file.write( + """ mp_obj_tuple_t common_hal_usb_hid_devices = {{ .base = {{ .type = &mp_type_tuple, @@ -867,26 +962,119 @@ mp_obj_tuple_t common_hal_usb_hid_devices = {{ .len = {num_devices}, .items = {{ """.format( - num_devices=len(args.hid_devices) - ) -) -for idx in range(len(args.hid_devices)): - c_file.write( - """\ - (mp_obj_t) &usb_hid_devices[{idx}], -""".format( - idx=idx + num_devices=len(args.hid_devices) ) ) -c_file.write( - """\ + for idx in range(len(args.hid_devices)): + c_file.write( + """\ + (mp_obj_t) &usb_hid_devices[{idx}], +""".format( + idx=idx + ) + ) + c_file.write( + """\ }, }; """ -) + ) -h_file.write( - """\ -#endif // MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H -""" -) +if include_vendor: + # Mimic what the tinyusb webusb demo does in its main.c file + c_file.write( + """ +#define URL "{webusb_url}" + +const tusb_desc_webusb_url_t desc_webusb_url = +{{ + .bLength = 3 + sizeof(URL) - 1, + .bDescriptorType = 3, // WEBUSB URL type + .bScheme = 1, // 0: http, 1: https, 255: "" + .url = URL +}}; + +// These next two hardcoded descriptors were pulled from the usb_descriptor.c file +// of the tinyusb webusb_serial demo. TODO - this is probably something else to +// integrate into the adafruit_usb_descriptors project... + +//--------------------------------------------------------------------+ +// BOS Descriptor +//--------------------------------------------------------------------+ + +/* Microsoft OS 2.0 registry property descriptor +Per MS requirements https://msdn.microsoft.com/en-us/library/windows/hardware/hh450799(v=vs.85).aspx +device should create DeviceInterfaceGUIDs. It can be done by driver and +in case of real PnP solution device should expose MS "Microsoft OS 2.0 +registry property descriptor". Such descriptor can insert any record +into Windows registry per device/configuration/interface. In our case it +will insert "DeviceInterfaceGUIDs" multistring property. + +GUID is freshly generated and should be OK to use. + +https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ +(Section Microsoft OS compatibility descriptors) +*/ + +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_WEBUSB_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) + +#define MS_OS_20_DESC_LEN 0xB2 + +// BOS Descriptor is required for webUSB +uint8_t const desc_bos[] = +{{ + // total length, number of device caps + TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 2), + + // Vendor Code, iLandingPage + TUD_BOS_WEBUSB_DESCRIPTOR(VENDOR_REQUEST_WEBUSB, 1), + + // Microsoft OS 2.0 descriptor + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, VENDOR_REQUEST_MICROSOFT) +}}; + +uint8_t const * tud_descriptor_bos_cb(void) +{{ + return desc_bos; +}} + + +#define ITF_NUM_VENDOR {webusb_interface} // used in this next descriptor + +uint8_t const desc_ms_os_20[] = +{{ + // Set header: length, type, windows version, total length + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + + // Configuration subset header: length, type, configuration index, reserved, configuration total length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + + // Function Subset header: length, type, first interface, reserved, subset length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_VENDOR, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + + // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + + // MS OS 2.0 Registry property descriptor: length, type + U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, + 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(0x0050), // wPropertyDataLength + //bPropertyData: “{{975F44D9-0D08-43FD-8B3E-127CA8AFFF9D}}”. + '{{', 0x00, '9', 0x00, '7', 0x00, '5', 0x00, 'F', 0x00, '4', 0x00, '4', 0x00, 'D', 0x00, '9', 0x00, '-', 0x00, + '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, + '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, + '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}}', 0x00, 0x00, 0x00, 0x00, 0x00 +}}; + +TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); + +// End of section about desc_ms_os_20 + +""".format( + webusb_url=args.webusb_url, + webusb_interface=vendor_interface.bInterfaceNumber, + ) + )