diff --git a/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/board.c b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/board.c
new file mode 100644
index 0000000000..5adae1fd56
--- /dev/null
+++ b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/board.c
@@ -0,0 +1,110 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-bindings/board/__init__.h"
+#include "shared-bindings/i2cdisplaybus/I2CDisplayBus.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+#include "shared-bindings/busio/I2C.h"
+#include "supervisor/shared/board.h"
+#include "shared-bindings/board/__init__.h"
+
+uint8_t display_init_sequence[] = { // SSD1306
+    0xAE, 0, // DISPLAY_OFF
+    0x20, 1, 0x00, // Set memory addressing to horizontal mode.
+    0x81, 1, 0xcf, // set contrast control
+    0xA1, 0, // Column 127 is segment 0
+    0xA6, 0, // Normal display
+    0xc8, 0, // Normal display
+    0xA8, 1, 0x3F, // Mux ratio is height-1
+    0xd5, 1, 0x80, // Set divide ratio
+    0xd9, 1, 0xf1, // Set pre-charge period
+    0xda, 1, 0x12, // 0x12 cause 64 height, but 0x02 if it's 32 height
+    0xdb, 1, 0x40, // Set vcom configuration
+    0x8d, 1, 0x14, // Enable charge pump
+    0xAF, 0, // DISPLAY_ON
+};
+
+digitalio_digitalinout_obj_t display_on;
+
+static void display_init(void) {
+    // Need to bring GPIO21 high or the screen doesn't get power
+    // & the board can't see the i2c bus at all.
+    common_hal_digitalio_digitalinout_construct(&display_on, &pin_GPIO21);
+    common_hal_digitalio_digitalinout_switch_to_output(&display_on, true, DRIVE_MODE_PUSH_PULL);
+    common_hal_digitalio_digitalinout_never_reset(&display_on);
+
+    busio_i2c_obj_t *i2c = common_hal_board_create_i2c(0);
+
+    i2cdisplaybus_i2cdisplaybus_obj_t *bus = &allocate_display_bus()->i2cdisplay_bus;
+    bus->base.type = &i2cdisplaybus_i2cdisplaybus_type;
+    common_hal_i2cdisplaybus_i2cdisplaybus_construct(
+        bus,
+        i2c,
+        0x3c,
+        NULL
+        );
+
+    busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
+    display->base.type = &busdisplay_busdisplay_type;
+    common_hal_busdisplay_busdisplay_construct(display,
+        bus,
+        128, // Width
+        64, // Height
+        0, // column start
+        0, // row start
+        0, // rotation
+        1, // Color depth
+        true, // grayscale
+        false, // pixels in byte share row. Only used with depth < 8
+        1, // bytes per cell. Only valid for depths < 8
+        false, // reverse_pixels_in_byte. Only valid for depths < 8
+        true, // reverse_pixels_in_word
+        0x21, // Set column command
+        0x22, // Set row command
+        44, // Write ram command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        NULL, // no backlight pin
+        0x81, // brightness command
+        1.0f, // brightness
+        true, // single_byte_bounds
+        true, // data as commands
+        true, // auto_refresh
+        60, // native_frames_per_second
+        true, // backlight_on_high
+        false, // SH1107_addressing
+        0); // backlight pwm frequency
+}
+
+void board_init(void) {
+    display_init();
+}
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/mpconfigboard.h b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/mpconfigboard.h
new file mode 100644
index 0000000000..ea7d4e4dde
--- /dev/null
+++ b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/mpconfigboard.h
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Heltec ESP32-S3-WIFI-LoRa-V3"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO35) // Pulled from schematic
+
+// I2C
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO18, .sda = &pin_GPIO17}}
+
+// UART definition for UART connected to the CP210x
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
+
+// Serial over UART
+#define CIRCUITPY_CONSOLE_UART_RX               DEFAULT_UART_BUS_RX
+#define CIRCUITPY_CONSOLE_UART_TX               DEFAULT_UART_BUS_TX
diff --git a/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/mpconfigboard.mk b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/mpconfigboard.mk
new file mode 100644
index 0000000000..7c330ce8af
--- /dev/null
+++ b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/mpconfigboard.mk
@@ -0,0 +1,29 @@
+# Product URL: https://heltec.org/project/wifi-lora-32-v3/
+# Schematic: https://resource.heltec.cn/download/WiFi_LoRa32_V3/HTIT-WB32LA(F)_V3_Schematic_Diagram.pdf
+# Datasheet: https://resource.heltec.cn/download/WiFi_LoRa32_V3/HTIT-WB32LA_V3(Rev1.1).pdf
+# Pinout: https://resource.heltec.cn/download/WiFi_LoRa32_V3/HTIT-WB32LA(F)_V3.png
+
+CIRCUITPY_CREATOR_ID = 0x148E173C
+CIRCUITPY_CREATION_ID = 0x00530001
+
+USB_PRODUCT = "ESP32-S3-WIFI-LoRa-V3"
+USB_MANUFACTURER = "Heltec"
+
+IDF_TARGET = esp32s3
+
+# This board doesn't have USB by default, it
+# instead uses a CP2102 USB-to-Serial chip
+CIRCUITPY_USB = 0
+CIRCUITPY_ESP_USB_SERIAL_JTAG = 0
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 8MB
+
+CIRCUITPY_ESPCAMERA = 0
+
+CIRCUITPY_DISPLAYIO = 1
+
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Display_Shapes
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Display_Text
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM9x
diff --git a/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/pins.c b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/pins.c
new file mode 100644
index 0000000000..69fe56f4bb
--- /dev/null
+++ b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/pins.c
@@ -0,0 +1,116 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
+    { MP_ROM_QSTR(MP_QSTR_IO47), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
+
+    { MP_ROM_QSTR(MP_QSTR_GPIO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO46), MP_ROM_PTR(&pin_GPIO46) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO37), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_GPIO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO48), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO47), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO33), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO34), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_GPIO44), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_BAT_ADC), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_USER_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_TOUCH1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_TOUCH7), MP_ROM_PTR(&pin_GPIO7) },
+
+    { MP_ROM_QSTR(MP_QSTR_ADC2_CH9A), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_ADC1_CH9B), MP_ROM_PTR(&pin_GPIO20) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED),  MP_ROM_PTR(&pin_GPIO35) },
+
+    // UART that's connected to CP210x over USB
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_RX), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+
+    // LORA SPI, Reset, and More
+    { MP_ROM_QSTR(MP_QSTR_LORA_NSS), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_LORA_SCK), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_LORA_MOSI), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_LORA_MISO), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_LORA_RST), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_LORA_BUSY), MP_ROM_PTR(&pin_GPIO13) },
+
+    // OLED I2C & Reset
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_OLED_RST), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_OLED_SDA), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_OLED_SCL), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/sdkconfig b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/sdkconfig
new file mode 100644
index 0000000000..ab4e9875ad
--- /dev/null
+++ b/ports/espressif/boards/heltec_esp32s3_wifi_lora_v3/sdkconfig
@@ -0,0 +1,16 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+CONFIG_ESP_PHY_ENABLE_USB=n
+CONFIG_LWIP_LOCAL_HOSTNAME="HELTEC-ESP32S3-V3"
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration