samd/clock_config: Split clock_config.c to separate SAMD21/SAMD51 files.

And put the file into the mcu directory.  The file got a little bit long
and hard to read.
This commit is contained in:
robert-hh 2022-06-15 18:49:24 +02:00 committed by Damien George
parent 929dfc66a3
commit f00356a486
3 changed files with 169 additions and 132 deletions

View File

@ -88,7 +88,7 @@ LDFLAGS += -L"$(shell dirname $(LIBSTDCPP_FILE_NAME))"
endif
SRC_C += \
clock_config.c \
mcu/$(MCU_SERIES_LOWER)/clock_config.c \
help.c \
machine_adc.c \
machine_bitstream.c \

View File

@ -0,0 +1,168 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* This file provides functions for configuring the clocks.
*
* The MIT License (MIT)
*
* Copyright (c) 2022 Robert Hammelrath
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include "py/runtime.h"
#include "samd_soc.h"
static uint32_t cpu_freq = CPU_FREQ;
static uint32_t apb_freq = APB_FREQ;
int sercom_gclk_id[] = {
GCLK_CLKCTRL_ID_SERCOM0_CORE, GCLK_CLKCTRL_ID_SERCOM1_CORE,
GCLK_CLKCTRL_ID_SERCOM2_CORE, GCLK_CLKCTRL_ID_SERCOM3_CORE,
GCLK_CLKCTRL_ID_SERCOM4_CORE, GCLK_CLKCTRL_ID_SERCOM5_CORE
};
uint32_t get_cpu_freq(void) {
return cpu_freq;
}
uint32_t get_apb_freq(void) {
return apb_freq;
}
void set_cpu_freq(uint32_t cpu_freq_arg) {
cpu_freq = cpu_freq_arg;
}
void init_clocks(uint32_t cpu_freq) {
// SAMD21 Clock settings
// GCLK0: 48MHz from DFLL open loop mode or closed loop mode from 32k Crystal
// GCLK1: 32768 Hz from 32K ULP or 32k Crystal
// GCLK2: 48MHz from DFLL for Peripherals
// GCLK3: 1Mhz for the us-counter (TC4/TC5)
// GCLK8: 1kHz clock for WDT
NVMCTRL->CTRLB.bit.MANW = 1; // errata "Spurious Writes"
NVMCTRL->CTRLB.bit.RWS = 1; // 1 read wait state for 48MHz
#if MICROPY_HW_XOSC32K
// Set up OSC32K according datasheet 17.6.3
SYSCTRL->XOSC32K.reg = SYSCTRL_XOSC32K_STARTUP(0x3) | SYSCTRL_XOSC32K_EN32K |
SYSCTRL_XOSC32K_XTALEN;
SYSCTRL->XOSC32K.bit.ENABLE = 1;
while (SYSCTRL->PCLKSR.bit.XOSC32KRDY == 0) {
}
// Set up the DFLL48 according to the data sheet 17.6.7.1.2
// Step 1: Set up the reference clock
// Connect the OSC32K via GCLK1 to the DFLL input and for further use.
GCLK->GENDIV.reg = GCLK_GENDIV_ID(1) | GCLK_GENDIV_DIV(1);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_XOSC32K | GCLK_GENCTRL_ID(1);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_DFLL48 | GCLK_CLKCTRL_GEN_GCLK1 | GCLK_CLKCTRL_CLKEN;
// Enable access to the DFLLCTRL reg acc. to Errata 1.2.1
SYSCTRL->DFLLCTRL.reg = SYSCTRL_DFLLCTRL_ENABLE;
while (SYSCTRL->PCLKSR.bit.DFLLRDY == 0) {
}
// Step 2: Set the coarse and fine values.
// The coarse setting will be taken from the calibration data. So the value used here
// does not matter. Get the coarse value from the calib data. In case it is not set,
// set a midrange value.
uint32_t coarse = (*((uint32_t *)FUSES_DFLL48M_COARSE_CAL_ADDR) & FUSES_DFLL48M_COARSE_CAL_Msk)
>> FUSES_DFLL48M_COARSE_CAL_Pos;
if (coarse == 0x3f) {
coarse = 0x1f;
}
SYSCTRL->DFLLVAL.reg = SYSCTRL_DFLLVAL_COARSE(coarse) | SYSCTRL_DFLLVAL_FINE(512);
while (SYSCTRL->PCLKSR.bit.DFLLRDY == 0) {
}
// Step 3: Set the multiplication values. The offset of 16384 to the freq is for rounding.
SYSCTRL->DFLLMUL.reg = SYSCTRL_DFLLMUL_MUL((CPU_FREQ + 16384) / 32768) |
SYSCTRL_DFLLMUL_FSTEP(1) | SYSCTRL_DFLLMUL_CSTEP(1);
while (SYSCTRL->PCLKSR.bit.DFLLRDY == 0) {
}
// Step 4: Start the DFLL and wait for the PLL lock. We just wait for the fine lock, since
// coarse adjusting is bypassed.
SYSCTRL->DFLLCTRL.reg |= SYSCTRL_DFLLCTRL_MODE | SYSCTRL_DFLLCTRL_WAITLOCK |
SYSCTRL_DFLLCTRL_BPLCKC | SYSCTRL_DFLLCTRL_ENABLE;
while (SYSCTRL->PCLKSR.bit.DFLLLCKF == 0) {
}
#else // MICROPY_HW_XOSC32K
// Enable DFLL48M
SYSCTRL->DFLLCTRL.reg = SYSCTRL_DFLLCTRL_ENABLE;
while (!SYSCTRL->PCLKSR.bit.DFLLRDY) {
}
SYSCTRL->DFLLMUL.reg = SYSCTRL_DFLLMUL_CSTEP(1) | SYSCTRL_DFLLMUL_FSTEP(1)
| SYSCTRL_DFLLMUL_MUL(48000);
uint32_t coarse = (*((uint32_t *)FUSES_DFLL48M_COARSE_CAL_ADDR) & FUSES_DFLL48M_COARSE_CAL_Msk)
>> FUSES_DFLL48M_COARSE_CAL_Pos;
if (coarse == 0x3f) {
coarse = 0x1f;
}
SYSCTRL->DFLLVAL.reg = SYSCTRL_DFLLVAL_COARSE(coarse) | SYSCTRL_DFLLVAL_FINE(512);
SYSCTRL->DFLLCTRL.reg = SYSCTRL_DFLLCTRL_CCDIS | SYSCTRL_DFLLCTRL_USBCRM
| SYSCTRL_DFLLCTRL_MODE | SYSCTRL_DFLLCTRL_ENABLE;
while (!SYSCTRL->PCLKSR.bit.DFLLRDY) {
}
// Enable 32768 Hz on GCLK1 for consistency
GCLK->GENDIV.reg = GCLK_GENDIV_ID(1) | GCLK_GENDIV_DIV(48016384 / 32768);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(1);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
#endif // MICROPY_HW_XOSC32K
// Enable GCLK output: 48M on both CCLK0 and GCLK2
GCLK->GENDIV.reg = GCLK_GENDIV_ID(0) | GCLK_GENDIV_DIV(1);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(0);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
GCLK->GENDIV.reg = GCLK_GENDIV_ID(2) | GCLK_GENDIV_DIV(1);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(2);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
// Enable GCLK output: 1MHz on GCLK3 for TC4
GCLK->GENDIV.reg = GCLK_GENDIV_ID(3) | GCLK_GENDIV_DIV(48);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(3);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
// Set GCLK8 to 1 kHz.
GCLK->GENDIV.reg = GCLK_GENDIV_ID(8) | GCLK_GENDIV_DIV(32);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_OSCULP32K | GCLK_GENCTRL_ID(8);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
}
void enable_sercom_clock(int id) {
// Next: Set up the clocks
// Enable synchronous clock. The bits are nicely arranged
PM->APBCMASK.reg |= 0x04 << id;
// Select multiplexer generic clock source and enable.
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK2 | sercom_gclk_id[id];
// Wait while it updates synchronously.
while (GCLK->STATUS.bit.SYNCBUSY) {
}
}

View File

@ -34,13 +34,6 @@
static uint32_t cpu_freq = CPU_FREQ;
static uint32_t apb_freq = APB_FREQ;
#if defined(MCU_SAMD21)
int sercom_gclk_id[] = {
GCLK_CLKCTRL_ID_SERCOM0_CORE, GCLK_CLKCTRL_ID_SERCOM1_CORE,
GCLK_CLKCTRL_ID_SERCOM2_CORE, GCLK_CLKCTRL_ID_SERCOM3_CORE,
GCLK_CLKCTRL_ID_SERCOM4_CORE, GCLK_CLKCTRL_ID_SERCOM5_CORE
};
#elif defined(MCU_SAMD51)
int sercom_gclk_id[] = {
SERCOM0_GCLK_ID_CORE, SERCOM1_GCLK_ID_CORE,
SERCOM2_GCLK_ID_CORE, SERCOM3_GCLK_ID_CORE,
@ -49,7 +42,6 @@ int sercom_gclk_id[] = {
SERCOM6_GCLK_ID_CORE, SERCOM7_GCLK_ID_CORE,
#endif
};
#endif
uint32_t get_cpu_freq(void) {
return cpu_freq;
@ -59,12 +51,6 @@ uint32_t get_apb_freq(void) {
return apb_freq;
}
#if defined(MCU_SAMD21)
void set_cpu_freq(uint32_t cpu_freq_arg) {
cpu_freq = cpu_freq_arg;
}
#elif defined(MCU_SAMD51)
void set_cpu_freq(uint32_t cpu_freq_arg) {
cpu_freq = cpu_freq_arg;
@ -97,113 +83,8 @@ void set_cpu_freq(uint32_t cpu_freq_arg) {
while (GCLK->SYNCBUSY.bit.GENCTRL0) {
}
}
#endif
void init_clocks(uint32_t cpu_freq) {
#if defined(MCU_SAMD21)
// SAMD21 Clock settings
// GCLK0: 48MHz from DFLL open loop mode or closed loop mode from 32k Crystal
// GCLK1: 32768 Hz from 32K ULP or 32k Crystal
// GCLK2: 48MHz from DFLL for Peripherals
// GCLK3: 1Mhz for the us-counter (TC3/TC4)
// GCLK8: 1kHz clock for WDT
NVMCTRL->CTRLB.bit.MANW = 1; // errata "Spurious Writes"
NVMCTRL->CTRLB.bit.RWS = 1; // 1 read wait state for 48MHz
#if MICROPY_HW_XOSC32K
// Set up OSC32K according datasheet 17.6.3
SYSCTRL->XOSC32K.reg = SYSCTRL_XOSC32K_STARTUP(0x3) | SYSCTRL_XOSC32K_EN32K |
SYSCTRL_XOSC32K_XTALEN;
SYSCTRL->XOSC32K.bit.ENABLE = 1;
while (SYSCTRL->PCLKSR.bit.XOSC32KRDY == 0) {
}
// Set up the DFLL48 according to the data sheet 17.6.7.1.2
// Step 1: Set up the reference clock
// Connect the OSC32K via GCLK1 to the DFLL input and for further use.
GCLK->GENDIV.reg = GCLK_GENDIV_ID(1) | GCLK_GENDIV_DIV(1);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_XOSC32K | GCLK_GENCTRL_ID(1);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_DFLL48 | GCLK_CLKCTRL_GEN_GCLK1 | GCLK_CLKCTRL_CLKEN;
// Enable access to the DFLLCTRL reg acc. to Errata 1.2.1
SYSCTRL->DFLLCTRL.reg = SYSCTRL_DFLLCTRL_ENABLE;
while (SYSCTRL->PCLKSR.bit.DFLLRDY == 0) {
}
// Step 2: Set the coarse and fine values.
// The coarse setting will be taken from the calibration data. So the value used here
// does not matter. Get the coarse value from the calib data. In case it is not set,
// set a midrange value.
uint32_t coarse = (*((uint32_t *)FUSES_DFLL48M_COARSE_CAL_ADDR) & FUSES_DFLL48M_COARSE_CAL_Msk)
>> FUSES_DFLL48M_COARSE_CAL_Pos;
if (coarse == 0x3f) {
coarse = 0x1f;
}
SYSCTRL->DFLLVAL.reg = SYSCTRL_DFLLVAL_COARSE(coarse) | SYSCTRL_DFLLVAL_FINE(512);
while (SYSCTRL->PCLKSR.bit.DFLLRDY == 0) {
}
// Step 3: Set the multiplication values. The offset of 16384 to the freq is for rounding.
SYSCTRL->DFLLMUL.reg = SYSCTRL_DFLLMUL_MUL((CPU_FREQ + 16384) / 32768) |
SYSCTRL_DFLLMUL_FSTEP(1) | SYSCTRL_DFLLMUL_CSTEP(1);
while (SYSCTRL->PCLKSR.bit.DFLLRDY == 0) {
}
// Step 4: Start the DFLL and wait for the PLL lock. We just wait for the fine lock, since
// coarse adjusting is bypassed.
SYSCTRL->DFLLCTRL.reg |= SYSCTRL_DFLLCTRL_MODE | SYSCTRL_DFLLCTRL_WAITLOCK |
SYSCTRL_DFLLCTRL_BPLCKC | SYSCTRL_DFLLCTRL_ENABLE;
while (SYSCTRL->PCLKSR.bit.DFLLLCKF == 0) {
}
#else // MICROPY_HW_XOSC32K
// Enable DFLL48M
SYSCTRL->DFLLCTRL.reg = SYSCTRL_DFLLCTRL_ENABLE;
while (!SYSCTRL->PCLKSR.bit.DFLLRDY) {
}
SYSCTRL->DFLLMUL.reg = SYSCTRL_DFLLMUL_CSTEP(1) | SYSCTRL_DFLLMUL_FSTEP(1)
| SYSCTRL_DFLLMUL_MUL(48000);
uint32_t coarse = (*((uint32_t *)FUSES_DFLL48M_COARSE_CAL_ADDR) & FUSES_DFLL48M_COARSE_CAL_Msk)
>> FUSES_DFLL48M_COARSE_CAL_Pos;
if (coarse == 0x3f) {
coarse = 0x1f;
}
SYSCTRL->DFLLVAL.reg = SYSCTRL_DFLLVAL_COARSE(coarse) | SYSCTRL_DFLLVAL_FINE(512);
SYSCTRL->DFLLCTRL.reg = SYSCTRL_DFLLCTRL_CCDIS | SYSCTRL_DFLLCTRL_USBCRM
| SYSCTRL_DFLLCTRL_MODE | SYSCTRL_DFLLCTRL_ENABLE;
while (!SYSCTRL->PCLKSR.bit.DFLLRDY) {
}
// Enable 32768 Hz on GCLK1 for consistency
GCLK->GENDIV.reg = GCLK_GENDIV_ID(1) | GCLK_GENDIV_DIV(48016384 / 32768);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(1);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
#endif // MICROPY_HW_XOSC32K
// Enable GCLK output: 48M on both CCLK0 and GCLK2
GCLK->GENDIV.reg = GCLK_GENDIV_ID(0) | GCLK_GENDIV_DIV(1);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(0);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
GCLK->GENDIV.reg = GCLK_GENDIV_ID(2) | GCLK_GENDIV_DIV(1);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(2);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
// Enable GCLK output: 1MHz on GCLK3 for TC3
GCLK->GENDIV.reg = GCLK_GENDIV_ID(3) | GCLK_GENDIV_DIV(48);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL48M | GCLK_GENCTRL_ID(3);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
// Set GCLK8 to 1 kHz.
GCLK->GENDIV.reg = GCLK_GENDIV_ID(8) | GCLK_GENDIV_DIV(32);
GCLK->GENCTRL.reg = GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_OSCULP32K | GCLK_GENCTRL_ID(8);
while (GCLK->STATUS.bit.SYNCBUSY) {
}
#elif defined(MCU_SAMD51)
// SAMD51 clock settings
// GCLK0: 48MHz from DFLL48M or 48 - 200 MHz from DPLL0 (SAMD51)
// GCLK1: DPLLx_REF_FREQ 32768 Hz from 32KULP or 32k Crystal
@ -299,21 +180,10 @@ void init_clocks(uint32_t cpu_freq) {
GCLK->GENCTRL[3].reg = GCLK_GENCTRL_DIV(6) | GCLK_GENCTRL_RUNSTDBY | GCLK_GENCTRL_GENEN | GCLK_GENCTRL_SRC_DFLL;
while (GCLK->SYNCBUSY.bit.GENCTRL3) {
}
#endif // defined(MCU_SAMD51)
}
void enable_sercom_clock(int id) {
// Next: Set up the clocks
#if defined(MCU_SAMD21)
// Enable synchronous clock. The bits are nicely arranged
PM->APBCMASK.reg |= 0x04 << id;
// Select multiplexer generic clock source and enable.
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_CLKEN | GCLK_CLKCTRL_GEN_GCLK2 | sercom_gclk_id[id];
// Wait while it updates synchronously.
while (GCLK->STATUS.bit.SYNCBUSY) {
}
#elif defined(MCU_SAMD51)
GCLK->PCHCTRL[sercom_gclk_id[id]].reg = GCLK_PCHCTRL_CHEN | GCLK_PCHCTRL_GEN_GCLK2;
// no easy way to set the clocks, except enabling all of them
switch (id) {
@ -344,5 +214,4 @@ void enable_sercom_clock(int id) {
break;
#endif
}
#endif
}