Merge remote-tracking branch 'adafruit/main' into c3_serial_jtag

locale/ID.po

@@ -2441,6 +2441,10 @@ msgstr "Tidak dapat memulai parser"
 msgid "Unable to read color palette data"
 msgstr "Tidak dapat membaca data palet warna"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Tidak dapat menulis ke nvm."
@@ -3660,6 +3664,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4108,6 +4120,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/cs.po

@@ -2417,6 +2417,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3634,6 +3638,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4081,6 +4093,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/de_DE.po

@@ -2458,6 +2458,10 @@ msgstr "Parser konnte nicht gestartet werden"
 msgid "Unable to read color palette data"
 msgstr "Konnte Farbpalettendaten nicht lesen"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Schreiben in nvm nicht möglich."
@@ -3711,6 +3715,14 @@ msgstr "long int wird in diesem Build nicht unterstützt"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "Loopback + Silent Mode wird vom Peripheriegerät nicht unterstützt"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "fehlformatierter f-string"
@@ -4163,6 +4175,7 @@ msgstr "pow() mit 3 Argumenten erfordert Integer"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/el.po

@@ -2408,6 +2408,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3625,6 +3629,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4072,6 +4084,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/en_GB.po

@@ -2437,6 +2437,10 @@ msgstr "Unable to init parser"
 msgid "Unable to read color palette data"
 msgstr "Unable to read colour palette data"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Unable to write to nvm."
@@ -3660,6 +3664,14 @@ msgstr "long int not supported in this build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + silent mode not supported by peripheral"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "malformed f-string"
@@ -4107,6 +4119,7 @@ msgstr "pow() with 3 arguments requires integers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/es.po

@@ -2468,6 +2468,10 @@ msgstr "Incapaz de inicializar el parser"
 msgid "Unable to read color palette data"
 msgstr "No se pudo leer los datos de la paleta de colores"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Imposible escribir en nvm."
@@ -3702,6 +3706,14 @@ msgstr "long int no soportado en esta compilación"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "Loopback + modo silencioso no están soportados por periférico"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "cadena-f mal formada"
@@ -4153,6 +4165,7 @@ msgstr "pow() con 3 argumentos requiere enteros"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/fil.po

@@ -2428,6 +2428,10 @@ msgstr "Hindi ma-init ang parser"
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Hindi ma i-sulat sa NVM."
@@ -3664,6 +3668,14 @@ msgstr "long int hindi sinusuportahan sa build na ito"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4113,6 +4125,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/fr.po

@@ -2484,6 +2484,10 @@ msgstr "Impossible d'initialiser le parser"
 msgid "Unable to read color palette data"
 msgstr "Impossible de lire les données de la palette de couleurs"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Écriture impossible vers nvm."
@@ -3732,6 +3736,14 @@ msgstr "entiers longs non supportés dans cette build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + silent mode non pris en charge par le périphérique"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "f-string mal formé"
@@ -4184,6 +4196,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/hi.po

@@ -2408,6 +2408,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3625,6 +3629,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4072,6 +4084,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/it_IT.po

@@ -2445,6 +2445,10 @@ msgstr "Inizilizzazione del parser non possibile"
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Imposibile scrivere su nvm."
@@ -3680,6 +3684,14 @@ msgstr "long int non supportata in questa build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4133,6 +4145,7 @@ msgstr "pow() con 3 argomenti richiede interi"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/ja.po

@@ -2423,6 +2423,10 @@ msgstr "パーザを初期化できません"
 msgid "Unable to read color palette data"
 msgstr "カラーパレットデータを読み込めません"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "nvmに書き込みできません"
@@ -3645,6 +3649,14 @@ msgstr "このビルドはlong intに非対応"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "不正な形式のf-string"
@@ -4094,6 +4106,7 @@ msgstr "pow()の第3引数には整数が必要"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/ko.po

@@ -2412,6 +2412,10 @@ msgstr "파서를 초기화(init) 할 수 없습니다"
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3629,6 +3633,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4076,6 +4088,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/nl.po

@@ -2434,6 +2434,10 @@ msgstr "Niet in staat om de parser te initialiseren"
 msgid "Unable to read color palette data"
 msgstr "Niet in staat kleurenpalet data te lezen"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Niet in staat om naar nvm te schrijven."
@@ -3665,6 +3669,14 @@ msgstr "long int wordt niet ondersteund in deze build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + silent mode wordt niet ondersteund door randapparaat"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "onjuist gevormde f-string"
@@ -4113,6 +4125,7 @@ msgstr "pow() met 3 argumenten vereist integers"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/pl.po

@@ -2419,6 +2419,10 @@ msgstr "Błąd ustawienia parsera"
 msgid "Unable to read color palette data"
 msgstr "Nie można odczytać danych palety"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Błąd zapisu do NVM."
@@ -3637,6 +3641,14 @@ msgstr "long int jest nieobsługiwany"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "źle sformatowany f-string"
@@ -4085,6 +4097,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2022-03-19 16:56+0000\n"
+"PO-Revision-Date: 2022-03-21 22:57+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -2479,6 +2479,10 @@ msgstr "Não foi possível iniciar o analisador"
 msgid "Unable to read color palette data"
 msgstr "Não foi possível ler os dados da paleta de cores"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr "Não é possível iniciar a consulta mDNS"
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Não é possível gravar no nvm."
@@ -3722,6 +3726,14 @@ msgstr "o long int não é suportado nesta compilação"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "o loopback + o modo silencioso não é suportado pelo periférico"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr "O mDNS já foi inicializado"
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr "O mDNS só funciona com WiFi integrado"
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "f-string malformado"
@@ -4176,6 +4188,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/ru.po

@@ -2457,6 +2457,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3674,6 +3678,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4121,6 +4133,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2022-03-19 16:56+0000\n"
+"PO-Revision-Date: 2022-03-23 08:58+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -2450,6 +2450,10 @@ msgstr "Kan inte initiera tolken"
 msgid "Unable to read color palette data"
 msgstr "Det går inte att läsa färgpalettdata"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr "Det gick inte att starta mDNS-frågan"
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Det gick inte att skriva till nvm."
@@ -3685,6 +3689,14 @@ msgstr "long int stöds inte i denna build"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "loopback + tyst läge stöds inte av kringutrustning"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr "mDNS har redan initierats"
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr "mDNS fungerar bara med inbyggt WiFi"
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "f-sträng har felaktigt format"
@@ -4133,6 +4145,7 @@ msgstr "pow() med 3 argument kräver heltal"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/tr.po

@@ -2424,6 +2424,10 @@ msgstr ""
 msgid "Unable to read color palette data"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr ""
@@ -3641,6 +3645,14 @@ msgstr ""
 msgid "loopback + silent mode not supported by peripheral"
 msgstr ""
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr ""
@@ -4088,6 +4100,7 @@ msgstr ""
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

locale/zh_Latn_pinyin.po

@@ -2460,6 +2460,10 @@ msgstr "Wúfǎ chūshǐhuà jiěxī qì"
 msgid "Unable to read color palette data"
 msgstr "Wúfǎ dúqǔ tiáosèbǎn shùjù"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "Unable to start mDNS query"
+msgstr ""
+
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
 msgstr "Wúfǎ xiě rù nvm."
@@ -3694,6 +3698,14 @@ msgstr "cǐ bǎnběn bù zhīchí zhǎng zhěngshù"
 msgid "loopback + silent mode not supported by peripheral"
 msgstr "Wài shè bù zhī chí huán huí + jìng yīn mó shì"
 
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS already initialized"
+msgstr ""
+
+#: ports/espressif/common-hal/mdns/Server.c
+msgid "mDNS only works with built-in WiFi"
+msgstr ""
+
 #: py/parse.c
 msgid "malformed f-string"
 msgstr "jīxíng de f-string"
@@ -4141,6 +4153,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù"
 #: ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h
 #: ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h
+#: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h
 #: ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

ports/atmel-samd/boards/aloriumtech_evo_m51/mpconfigboard.h

@@ -9,7 +9,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_PB03)
 
 // BC needed?
-// #define AUTORESET_DELAY_MS 500
 
 // If you change this, then make sure to update the linker scripts as well to
 // make sure you don't overwrite code

ports/atmel-samd/boards/circuitbrains_deluxe_m4/mpconfigboard.h

@@ -5,8 +5,6 @@
 
 #define MICROPY_HW_LED_STATUS   (&pin_PB13)
 
-#define AUTORESET_DELAY_MS 500
-
 #define BOARD_HAS_CRYSTAL 1
 
 #define DEFAULT_I2C_BUS_SCL (&pin_PB03)

ports/atmel-samd/boards/pycubed/mpconfigboard.h

@@ -6,8 +6,6 @@
 #define MICROPY_HW_LED_STATUS (&pin_PA16)
 #define MICROPY_HW_NEOPIXEL   (&pin_PA21)
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/pycubed_mram/mpconfigboard.h

@@ -9,8 +9,6 @@
 #define EXTERNAL_FLASH_QSPI_SINGLE
 #define EXTERNAL_FLASH_NO_JEDEC
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/pycubed_mram_v05/mpconfigboard.h

@@ -9,8 +9,6 @@
 #define EXTERNAL_FLASH_QSPI_SINGLE
 #define EXTERNAL_FLASH_NO_JEDEC
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/pycubed_v05/mpconfigboard.h

@@ -5,8 +5,6 @@
 
 #define MICROPY_HW_NEOPIXEL   (&pin_PA21)
 
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_INTERNAL_NVM_SIZE 8192
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)

ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.h

@@ -6,8 +6,6 @@
 #define MICROPY_HW_LED_STATUS (&pin_PA23)
 #define MICROPY_HW_NEOPIXEL (&pin_PB03)
 
-#define AUTORESET_DELAY_MS 500
-
 #define BOARD_HAS_CRYSTAL 1
 
 #define DEFAULT_SPI_BUS_SCK (&pin_PA17)

ports/espressif/boards/adafruit_esp32s2_camera/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
 #define MICROPY_HW_NEOPIXEL_COUNT (6)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 

ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
 

ports/espressif/boards/adafruit_feather_esp32s2_tft/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO34)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO41)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO42)
 

ports/espressif/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
 

ports/espressif/boards/adafruit_feather_esp32s3_nopsram/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO4)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO3)
 

ports/espressif/boards/adafruit_funhouse/mpconfigboard.h

@@ -33,12 +33,6 @@
 #define MICROPY_HW_APA102_SCK (&pin_GPIO15)
 #define MICROPY_HW_APA102_COUNT (5)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO33)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO34)
 

ports/espressif/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h

@@ -34,12 +34,6 @@
 #define CIRCUITPY_STATUS_LED_POWER_INVERTED (1)
 #define MICROPY_HW_NEOPIXEL_COUNT (4)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 

ports/espressif/boards/adafruit_metro_esp32s2/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)
 

ports/espressif/boards/adafruit_qtpy_esp32s2/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO39)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO38)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_BOARD_I2C         (2)
 #define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
                                      {.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

ports/espressif/boards/adafruit_qtpy_esp32s3_nopsram/mpconfigboard.h

@@ -32,12 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO38)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO37)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define CIRCUITPY_BOARD_I2C         (2)
 #define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO7}, \
                                      {.scl = &pin_GPIO40, .sda = &pin_GPIO41}}

ports/espressif/boards/ai_thinker_esp32-c3s-2m/mpconfigboard.h

@@ -39,9 +39,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX               DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX               DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/ai_thinker_esp32-c3s/mpconfigboard.h

@@ -39,9 +39,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX               DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX               DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/ai_thinker_esp_12k_nodemcu/mpconfigboard.h

@@ -32,9 +32,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 // #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/artisense_rd00/mpconfigboard.h

@@ -33,11 +33,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_UART_BUS_RX (&pin_GPIO17)
 #define DEFAULT_UART_BUS_TX (&pin_GPIO18)

ports/espressif/boards/atmegazero_esp32s2/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "ATMegaZero ESP32-S2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
 

ports/espressif/boards/crumpspace_crumps2/mpconfigboard.h

@@ -28,8 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "CrumpS2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/electroniccats_bastwifi/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "BastWiFi"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_esp32c3_devkitm_1_n4/mpconfigboard.h

@@ -39,9 +39,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX               DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX               DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO2)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4/mpconfigboard.h

@@ -31,9 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/espressif_esp32s2_devkitc_1_n4r2/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "ESP32-S3-Box-2.5"
 #define MICROPY_HW_MCU_NAME         "ESP32S3"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r2/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n8r8/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitm_1_n8/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
 
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_hmi_devkit_1/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO21)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO39)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO40)
 

ports/espressif/boards/espressif_kaluga_1.3/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_kaluga_1/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_saola_1_wroom/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_saola_1_wrover/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/franzininho_wifi_wroom/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/franzininho_wifi_wrover/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/gravitech_cucumber_m/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_UART_BUS_TX (&pin_GPIO43)
 #define DEFAULT_UART_BUS_RX (&pin_GPIO44)

ports/espressif/boards/gravitech_cucumber_ms/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)
 

ports/espressif/boards/gravitech_cucumber_r/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_UART_BUS_TX (&pin_GPIO43)
 #define DEFAULT_UART_BUS_RX (&pin_GPIO44)

ports/espressif/boards/gravitech_cucumber_rs/mpconfigboard.h

@@ -31,12 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO40)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO41)
 

ports/espressif/boards/hexky_s2/mpconfigboard.h

@@ -32,11 +32,6 @@
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)
 

ports/espressif/boards/hiibot_iots2/mpconfigboard.h

@@ -34,7 +34,3 @@
 
 #define MICROPY_HW_BUTTON (&pin_GPIO21)
 #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO21)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lilygo_ttgo_t8_esp32_s2_wroom/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "TTGO T8 ESP32-S2-WROOM"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lilygo_ttgo_t8_s2/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "LILYGO TTGO T8 ESP32-S2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h

@@ -28,9 +28,3 @@
 
 #define MICROPY_HW_BOARD_NAME       "LILYGO TTGO T8 ESP32-S2 w/Display"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/lolin_s2_mini/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "S2Mini"
 #define MICROPY_HW_MCU_NAME         "ESP32S2-S2FN4R2" // from Wemos MP
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO35) // no I2C labels on S2 Mini, def from Wemos MP
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33) // no I2C labels on S2 Mini, def from Wemos MP
 

ports/espressif/boards/lolin_s2_pico/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "S2Pico"
 #define MICROPY_HW_MCU_NAME         "ESP32S2-S2FN4R2" // from Wemos MP
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9) // JST SH Connector Pin 3 NOT STEMMA QT / Feather pinout
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8) // JST SH Connector Pin 2 NOT STEMMA QT / Feather pinout
 

ports/espressif/boards/microdev_micro_c3/mpconfigboard.h

@@ -46,9 +46,3 @@
 // Serial over UART
 #define CIRCUITPY_DEBUG_UART_RX     DEFAULT_UART_BUS_RX
 #define CIRCUITPY_DEBUG_UART_TX     DEFAULT_UART_BUS_TX
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO9)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/microdev_micro_s2/mpconfigboard.h

@@ -41,9 +41,3 @@
 
 #define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
 #define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
-
-// For entering safe mode
-#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
-
-// Explanation of how a user got into safe mode
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

ports/espressif/boards/morpheans_morphesp-240/mpconfigboard.h

@@ -30,11 +30,6 @@
 #define MICROPY_HW_MCU_NAME     "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO16)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO7)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO6)

ports/espressif/boards/muselab_nanoesp32_s2_wroom/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/muselab_nanoesp32_s2_wrover/mpconfigboard.h

@@ -30,9 +30,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/odt_pixelwing_esp32_s2/mpconfigboard.h

@@ -31,11 +31,5 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO34)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO33)

ports/espressif/boards/targett_module_clip_wroom/mpconfigboard.h

@@ -32,9 +32,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 // #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/targett_module_clip_wrover/mpconfigboard.h

@@ -32,9 +32,3 @@
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
 // #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
-
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500

ports/espressif/boards/unexpectedmaker_feathers2/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "FeatherS2"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 // #define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
 // #define MICROPY_HW_APA102_SCK    (&pin_GPIO45)
 

ports/espressif/boards/unexpectedmaker_feathers2_neo/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h

@@ -29,11 +29,6 @@
 #define MICROPY_HW_BOARD_NAME       "FeatherS2 PreRelease"
 #define MICROPY_HW_MCU_NAME         "ESP32S2"
 
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
-
 // #define MICROPY_HW_APA102_MOSI   (&pin_GPIO40)
 // #define MICROPY_HW_APA102_SCK    (&pin_GPIO45)
 

ports/espressif/boards/unexpectedmaker_feathers3/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO40)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO39)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/unexpectedmaker_pros3/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO17)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/unexpectedmaker_tinys2/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO1)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO2)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/boards/unexpectedmaker_tinys3/mpconfigboard.h

@@ -31,10 +31,6 @@
 
 #define MICROPY_HW_NEOPIXEL (&pin_GPIO18)
 #define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO17)
-#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
-#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
-
-#define AUTORESET_DELAY_MS 500
 
 #define DEFAULT_I2C_BUS_SCL (&pin_GPIO9)
 #define DEFAULT_I2C_BUS_SDA (&pin_GPIO8)

ports/espressif/mpconfigport.h

@@ -51,6 +51,15 @@
 #define MICROPY_NLR_SETJMP                  (1)
 #define CIRCUITPY_DEFAULT_STACK_SIZE        0x6000
 
+// Nearly all boards have this because it is used to enter the ROM bootloader.
+#ifndef CIRCUITPY_BOOT_BUTTON
+#ifdef CONFIG_IDF_TARGET_ESP32C3
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO9)
+#else
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+#endif
+#endif
+
 #define CIRCUITPY_INTERNAL_NVM_START_ADDR (0x9000)
 
 // 20kB is statically allocated to nvs, but when overwriting an existing

ports/litex/boards/fomu/mpconfigboard.h

@@ -33,5 +33,4 @@
 #define FLASH_PAGE_SIZE             (0x1000)
 #define FLASH_PARTITION_OFFSET_BYTES (1024 * 1024)
 
-#define AUTORESET_DELAY_MS 500
 #define BOARD_FLASH_SIZE            (FLASH_SIZE)

ports/nrf/boards/makerdiary_nrf52840_mdk_usb_dongle/mpconfigboard.h

@@ -33,3 +33,8 @@
 #define MICROPY_HW_MCU_NAME         "nRF52840"
 
 #define BOARD_HAS_CRYSTAL 1  // according to the schematic we do
+
+#define CIRCUITPY_RGB_STATUS_INVERTED_PWM
+#define CIRCUITPY_RGB_STATUS_R      (&pin_P0_23)
+#define CIRCUITPY_RGB_STATUS_G      (&pin_P0_22)
+#define CIRCUITPY_RGB_STATUS_B      (&pin_P0_24)

ports/stm/boards/espruino_pico/mpconfigboard.h

@@ -32,7 +32,6 @@
 #define FLASH_SIZE                  (0x60000)
 #define FLASH_PAGE_SIZE             (0x4000)
 
-#define AUTORESET_DELAY_MS (500)
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000)
 
 #define HSE_VALUE ((uint32_t)8000000)

ports/stm/boards/meowbit_v121/mpconfigboard.h

@@ -32,7 +32,6 @@
 #define FLASH_SIZE                  (0x80000)
 #define FLASH_PAGE_SIZE             (0x4000)
 
-#define AUTORESET_DELAY_MS 500
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000)
 
 #define HSE_VALUE ((uint32_t)12000000U)

ports/stm/boards/pyb_nano_v2/mpconfigboard.h

@@ -44,6 +44,4 @@
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x2000 - 0xC000)
 
-#define AUTORESET_DELAY_MS (500)
-
 #define MICROPY_FATFS_EXFAT 0

ports/stm/boards/stm32f411ce_blackpill/mpconfigboard.h

@@ -46,5 +46,3 @@
 #define DEFAULT_I2C_BUS_SDA (&pin_PB07)
 
 #define BOARD_FLASH_SIZE (FLASH_SIZE - 0x2000 - 0xC000)
-
-#define AUTORESET_DELAY_MS (500)

supervisor/shared/safe_mode.c

@@ -147,12 +147,17 @@ void print_safe_mode_message(safe_mode_t reason) {
     switch (reason) {
         case USER_SAFE_MODE:
             #ifdef BOARD_USER_SAFE_MODE_ACTION
-            // Output a user safe mode string if it's set.
-            serial_write_compressed(translate("You requested starting safe mode by "));
-            serial_write_compressed(BOARD_USER_SAFE_MODE_ACTION);
-            serial_write_compressed(translate("To exit, please reset the board without "));
             message = BOARD_USER_SAFE_MODE_ACTION;
+            #elif defined(CIRCUITPY_BOOT_BUTTON)
+            message = translate("pressing boot button at start up.\n");
             #endif
+            if (message != NULL) {
+                // Output a user safe mode string if it's set.
+                serial_write_compressed(translate("You requested starting safe mode by "));
+                serial_write_compressed(message);
+                serial_write_compressed(translate("To exit, please reset the board without "));
+                // The final piece is printed below.
+            }
             break;
         case MANUAL_SAFE_MODE:
             message = translate("You pressed the reset button during boot. Press again to exit safe mode.");