diff --git a/ports/stm32f4/boards/STM32F401_fs.ld b/ports/stm32f4/boards/STM32F401_fs.ld index fd30e16228..c42dfcca8c 100644 --- a/ports/stm32f4/boards/STM32F401_fs.ld +++ b/ports/stm32f4/boards/STM32F401_fs.ld @@ -5,10 +5,10 @@ /* Specify the memory areas */ MEMORY { - FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K /* entire flash */ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 384K /* entire flash */ FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */ FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 48K /* sectors 1,2,3 are 16K */ - FLASH_TEXT (rx) : ORIGIN = 0x08010000, LENGTH = 448K /* sector 4 is 64K, sectors 5,6,7 are 128K */ + FLASH_TEXT (rx) : ORIGIN = 0x08010000, LENGTH = 320K /* sector 4 is 64K, sectors 5,6,7 are 128K */ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K } diff --git a/ports/stm32f4/boards/STM32F401xd_fs.ld b/ports/stm32f4/boards/STM32F401xd_fs.ld new file mode 100644 index 0000000000..fd30e16228 --- /dev/null +++ b/ports/stm32f4/boards/STM32F401xd_fs.ld @@ -0,0 +1,107 @@ +/* + GNU linker script for STM32F401 with bootloader (such as the Meowbit) +*/ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K /* entire flash */ + FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */ + FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 48K /* sectors 1,2,3 are 16K */ + FLASH_TEXT (rx) : ORIGIN = 0x08010000, LENGTH = 448K /* sector 4 is 64K, sectors 5,6,7 are 128K */ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K +} + +/* produce a link error if there is not this amount of RAM for these sections */ +_minimum_stack_size = 2K; +_minimum_heap_size = 16K; + +/* Define tho top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); + +/* RAM extents for the garbage collector */ +_ram_start = ORIGIN(RAM); +_ram_end = ORIGIN(RAM) + LENGTH(RAM); + +ENTRY(Reset_Handler) + +/* define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + + /* This first flash block is 16K annd the isr vectors only take up + about 400 bytes. Micropython pads this with files, but this didn't + work with the size of Circuitpython's ff object. */ + + . = ALIGN(4); + } >FLASH_ISR + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text*) /* .text* sections (code) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + /* *(.glue_7) */ /* glue arm to thumb code */ + /* *(.glue_7t) */ /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; /* define a global symbol at end of code */ + } >FLASH_TEXT + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* This is the initialized data section + The program executes knowing that the data is in the RAM + but the loader puts the initial values in the FLASH (inidata). + It is one task of the startup to copy the initial values from FLASH to RAM. */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start; used by startup code in order to initialise the .data section in RAM */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end; used by startup code in order to initialise the .data section in RAM */ + } >RAM AT> FLASH_TEXT + + /* Uninitialized data section */ + .bss : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start; used by startup code */ + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end; used by startup code and GC */ + } >RAM + + /* this is to define the start of the heap, and make sure we have a minimum size */ + .heap : + { + . = ALIGN(4); + . = . + _minimum_heap_size; + . = ALIGN(4); + } >RAM + + /* this just checks there is enough RAM for the stack */ + .stack : + { + . = ALIGN(4); + . = . + _minimum_stack_size; + . = ALIGN(4); + } >RAM + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/ports/stm32f4/boards/espruino_pico/board.c b/ports/stm32f4/boards/espruino_pico/board.c new file mode 100644 index 0000000000..82b0c506ed --- /dev/null +++ b/ports/stm32f4/boards/espruino_pico/board.c @@ -0,0 +1,39 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/stm32f4/boards/espruino_pico/mpconfigboard.h b/ports/stm32f4/boards/espruino_pico/mpconfigboard.h new file mode 100644 index 0000000000..aa179c7931 --- /dev/null +++ b/ports/stm32f4/boards/espruino_pico/mpconfigboard.h @@ -0,0 +1,39 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "Espruino Pico" +#define MICROPY_HW_MCU_NAME "STM32F401xD" + +#define FLASH_SIZE (0x60000) +#define FLASH_PAGE_SIZE (0x4000) + +#define AUTORESET_DELAY_MS 500 +#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000) + +#define BOARD_OSC_DIV 8 + diff --git a/ports/stm32f4/boards/espruino_pico/mpconfigboard.mk b/ports/stm32f4/boards/espruino_pico/mpconfigboard.mk new file mode 100644 index 0000000000..1db3939112 --- /dev/null +++ b/ports/stm32f4/boards/espruino_pico/mpconfigboard.mk @@ -0,0 +1,16 @@ +USB_VID = 0x239A +USB_PID = 0x805A +USB_PRODUCT = "Espruino Pico" +USB_MANUFACTURER = "Espruino" +USB_DEVICES = "CDC,MSC" + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = NONE + +MCU_SERIES = m4 +MCU_VARIANT = stm32f4 +MCU_SUB_VARIANT = stm32f401xe +MCU_PACKAGE = 48 +CMSIS_MCU = STM32F401xE +LD_FILE = boards/STM32F401xd_fs.ld # use for internal flash + diff --git a/ports/stm32f4/boards/espruino_pico/pins.c b/ports/stm32f4/boards/espruino_pico/pins.c new file mode 100644 index 0000000000..89f618c259 --- /dev/null +++ b/ports/stm32f4/boards/espruino_pico/pins.c @@ -0,0 +1,29 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR_B15), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_B14), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_B13), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_B10), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_B1), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA05) }, + + { MP_ROM_QSTR(MP_QSTR_B3), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_B4), MP_ROM_PTR(&pin_PB04) }, + { MP_ROM_QSTR(MP_QSTR_B5), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_B6), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_B7), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA08) }, + + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_B9), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_B8), MP_ROM_PTR(&pin_PB08) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/stm32f4/boards/espruino_pico/stm32f4xx_hal_conf.h b/ports/stm32f4/boards/espruino_pico/stm32f4xx_hal_conf.h new file mode 100644 index 0000000000..ab04df3182 --- /dev/null +++ b/ports/stm32f4/boards/espruino_pico/stm32f4xx_hal_conf.h @@ -0,0 +1,440 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f4xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2017 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)40000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/