diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 0b2a9058f5..0dbccdf4dd 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -177,6 +177,7 @@ jobs: - "8086_commander" - "ADM_B_NRF52840_1" - "TG-Watch" + - "adafruit_feather_rp2040" - "aloriumtech_evo_m51" - "aramcon_badge_2019" - "arduino_mkr1300" @@ -294,6 +295,7 @@ jobs: - "pyruler" - "qtpy_m0" - "qtpy_m0_haxpress" + - "raspberry_pi_pico" - "raytac_mdbt50q-db-40" - "robohatmm1_m4" - "sam32" @@ -315,6 +317,7 @@ jobs: - "spresense" - "stackrduino_m0_pro" - "stm32f411ce_blackpill" + - "stm32f411ce_blackpill_with_flash" - "stm32f411ve_discovery" - "stm32f412zg_discovery" - "stm32f4_discovery" @@ -464,7 +467,7 @@ jobs: id: idf-cache with: path: ${{ github.workspace }}/.idf_tools - key: ${{ runner.os }}-idf-tools-${{ hashFiles('.git/modules/ports/esp32s2/esp-idf/HEAD') }}-20210114 + key: ${{ runner.os }}-idf-tools-${{ hashFiles('.git/modules/ports/esp32s2/esp-idf/HEAD') }}-20210122 - name: Clone IDF submodules run: | (cd $IDF_PATH && git submodule update --init) diff --git a/.gitmodules b/.gitmodules index f4080de1b2..99de2c9186 100644 --- a/.gitmodules +++ b/.gitmodules @@ -171,3 +171,6 @@ [submodule "frozen/Adafruit_CircuitPython_LC709203F"] path = frozen/Adafruit_CircuitPython_LC709203F url = https://github.com/adafruit/Adafruit_CircuitPython_LC709203F +[submodule "ports/raspberrypi/sdk"] + path = ports/raspberrypi/sdk + url = https://github.com/raspberrypi/pico-sdk.git diff --git a/Makefile b/Makefile index adb206d7bc..845997beb2 100644 --- a/Makefile +++ b/Makefile @@ -255,6 +255,7 @@ stubs: @$(PYTHON) tools/extract_pyi.py shared-bindings/ $(STUBDIR) @$(PYTHON) tools/extract_pyi.py extmod/ulab/code/ $(STUBDIR)/ulab @$(PYTHON) tools/extract_pyi.py ports/atmel-samd/bindings $(STUBDIR) + @$(PYTHON) tools/extract_pyi.py ports/raspberrypi/bindings $(STUBDIR) @$(PYTHON) setup.py -q sdist .PHONY: check-stubs diff --git a/README.rst b/README.rst index 19992d284b..f14cf41ff3 100644 --- a/README.rst +++ b/README.rst @@ -125,7 +125,7 @@ Behavior get back into normal mode. - RGB status LED indicating CircuitPython state, and errors through a sequence of colored flashes. - Re-runs ``code.py`` or other main file after file system writes over USB mass storage. (Disable with - ``samd.disable_autoreload()``) + ``supervisor.disable_autoreload()``) - Entering the REPL after the main code is finished requires a key press which enters the REPL and disables autoreload. - Main is one of these: ``code.txt``, ``code.py``, ``main.py``, diff --git a/conf.py b/conf.py index c2d3d37eed..0a163e7d3c 100644 --- a/conf.py +++ b/conf.py @@ -189,6 +189,7 @@ exclude_patterns = ["**/build*", "ports/nrf/nrfx", "ports/nrf/peripherals", "ports/nrf/usb", + "ports/raspberrypi/sdk", "ports/stm/st_driver", "ports/stm/packages", "ports/stm/peripherals", diff --git a/docs/design_guide.rst b/docs/design_guide.rst index 75825893a9..7a8c76b507 100644 --- a/docs/design_guide.rst +++ b/docs/design_guide.rst @@ -520,7 +520,9 @@ properties. +-----------------------+-----------------------+-------------------------------------------------------------------------+ | ``temperature`` | float | degrees centigrade | +-----------------------+-----------------------+-------------------------------------------------------------------------+ -| ``eCO2`` | float | equivalent CO2 in ppm | +| ``CO2`` | float | measured CO2 in ppm | ++-----------------------+-----------------------+-------------------------------------------------------------------------+ +| ``eCO2`` | float | equivalent/estimated CO2 in ppm (estimated from some other measurement) | +-----------------------+-----------------------+-------------------------------------------------------------------------+ | ``TVOC`` | float | Total Volatile Organic Compounds in ppb | +-----------------------+-----------------------+-------------------------------------------------------------------------+ diff --git a/docs/library/uerrno.rst b/docs/library/errno.rst similarity index 76% rename from docs/library/uerrno.rst rename to docs/library/errno.rst index 72f71f0aac..96777b2052 100644 --- a/docs/library/uerrno.rst +++ b/docs/library/errno.rst @@ -1,9 +1,7 @@ -:mod:`uerrno` -- system error codes +:mod:`errno` -- system error codes =================================== -.. include:: ../templates/unsupported_in_circuitpython.inc - -.. module:: uerrno +.. module:: errno :synopsis: system error codes |see_cpython_module| :mod:`cpython:errno`. @@ -22,7 +20,7 @@ Constants try: os.mkdir("my_dir") except OSError as exc: - if exc.args[0] == uerrno.EEXIST: + if exc.args[0] == errno.EEXIST: print("Directory already exists") .. data:: errorcode @@ -30,5 +28,5 @@ Constants Dictionary mapping numeric error codes to strings with symbolic error code (see above):: - >>> print(uerrno.errorcode[uerrno.EEXIST]) + >>> print(errno.errorcode[uerrno.EEXIST]) EEXIST diff --git a/docs/library/esp.rst b/docs/library/esp.rst deleted file mode 100644 index 125aaa890f..0000000000 --- a/docs/library/esp.rst +++ /dev/null @@ -1,85 +0,0 @@ -:mod:`esp` --- functions related to the ESP8266 -=============================================== - -.. include:: ../templates/unsupported_in_circuitpython.inc - -.. module:: esp - :synopsis: functions related to the ESP8266 - -The ``esp`` module contains specific functions related to the ESP8266 module. - - -Functions ---------- - -.. function:: sleep_type([sleep_type]) - - Get or set the sleep type. - - If the *sleep_type* parameter is provided, sets the sleep type to its - value. If the function is called without parameters, returns the current - sleep type. - - The possible sleep types are defined as constants: - - * ``SLEEP_NONE`` -- all functions enabled, - * ``SLEEP_MODEM`` -- modem sleep, shuts down the WiFi Modem circuit. - * ``SLEEP_LIGHT`` -- light sleep, shuts down the WiFi Modem circuit - and suspends the processor periodically. - - The system enters the set sleep mode automatically when possible. - -.. function:: deepsleep(time=0) - - Enter deep sleep. - - The whole module powers down, except for the RTC clock circuit, which can - be used to restart the module after the specified time if the pin 16 is - connected to the reset pin. Otherwise the module will sleep until manually - reset. - -.. function:: flash_id() - - Read the device ID of the flash memory. - -.. function:: flash_read(byte_offset, length_or_buffer) - -.. function:: flash_write(byte_offset, bytes) - -.. function:: flash_erase(sector_no) - -.. function:: set_native_code_location(start, length) - - Set the location that native code will be placed for execution after it is - compiled. Native code is emitted when the ``@micropython.native``, - ``@micropython.viper`` and ``@micropython.asm_xtensa`` decorators are applied - to a function. The ESP8266 must execute code from either iRAM or the lower - 1MByte of flash (which is memory mapped), and this function controls the - location. - - If *start* and *length* are both ``None`` then the native code location is - set to the unused portion of memory at the end of the iRAM1 region. The - size of this unused portion depends on the firmware and is typically quite - small (around 500 bytes), and is enough to store a few very small - functions. The advantage of using this iRAM1 region is that it does not - get worn out by writing to it. - - If neither *start* nor *length* are ``None`` then they should be integers. - *start* should specify the byte offset from the beginning of the flash at - which native code should be stored. *length* specifies how many bytes of - flash from *start* can be used to store native code. *start* and *length* - should be multiples of the sector size (being 4096 bytes). The flash will - be automatically erased before writing to it so be sure to use a region of - flash that is not otherwise used, for example by the firmware or the - filesystem. - - When using the flash to store native code *start+length* must be less - than or equal to 1MByte. Note that the flash can be worn out if repeated - erasures (and writes) are made so use this feature sparingly. - In particular, native code needs to be recompiled and rewritten to flash - on each boot (including wake from deepsleep). - - In both cases above, using iRAM1 or flash, if there is no more room left - in the specified region then the use of a native decorator on a function - will lead to `MemoryError` exception being raised during compilation of - that function. diff --git a/docs/library/index.rst b/docs/library/index.rst index e913872421..181ff0109a 100644 --- a/docs/library/index.rst +++ b/docs/library/index.rst @@ -6,35 +6,21 @@ MicroPython libraries Python standard libraries and micro-libraries --------------------------------------------- -These libraries are inherited from MicroPython. -They are similar to the standard Python libraries with the same name -or with the "u" prefix dropped. +The libraries below are inherited from MicroPython. +They are similar to the standard Python libraries with the same name. They implement a subset of or a variant of the corresponding standard Python library. -.. warning:: - - Though these MicroPython-based libraries are available in CircuitPython, - their functionality may change in the future, perhaps significantly. - As CircuitPython continues to develop, new versions of these libraries will - be created that are more compliant with the standard Python libraries. - You may need to change your code later if you rely - on any non-standard functionality they currently provide. - CircuitPython's long-term goal is that code written in CircuitPython using Python standard libraries will be runnable on CPython without changes. -Some libraries below are not enabled on CircuitPython builds with +These libraries are not enabled on CircuitPython builds with limited flash memory, usually on non-Express builds: -``uerrno``, ``ure``. +``binascii``, ``errno``, ``json``, ``re``. -Some libraries are not currently enabled in any CircuitPython build, but may be in the future: -``uio``, ``ujson``, ``uzlib``. - -Some libraries are only enabled only WiFi-capable ports (ESP8266, nRF) -because they are typically used for network software: -``binascii``, ``hashlib``, ``uheapq``, ``uselect``, ``ussl``. -Not all of these are enabled on all WiFi-capable ports. +These libraries are not currently enabled in any CircuitPython build, but may be in the future, +with the ``u`` prefix dropped: +``uctypes``, ``uhashlib``, ``uzlib``. .. toctree:: :maxdepth: 1 @@ -44,13 +30,14 @@ Not all of these are enabled on all WiFi-capable ports. array.rst binascii.rst collections.rst + errno.rst gc.rst hashlib.rst + io.rst + json.rst + re.rst sys.rst - uerrno.rst - uio.rst - ujson.rst - ure.rst + uctypes.rst uselect.rst usocket.rst ussl.rst @@ -59,8 +46,8 @@ Not all of these are enabled on all WiFi-capable ports. Omitted functions in the ``string`` library ------------------------------------------- -A few string operations are not enabled on CircuitPython -M0 non-Express builds, due to limited flash memory: +A few string operations are not enabled on small builds +(usually non-Express), due to limited flash memory: ``string.center()``, ``string.partition()``, ``string.splitlines()``, ``string.reversed()``. @@ -78,15 +65,3 @@ versions of CircuitPython. btree.rst framebuf.rst micropython.rst - network.rst - uctypes.rst - -Libraries specific to the ESP8266 ---------------------------------- - -The following libraries are specific to the ESP8266. - -.. toctree:: - :maxdepth: 2 - - esp.rst diff --git a/docs/library/uio.rst b/docs/library/io.rst similarity index 97% rename from docs/library/uio.rst rename to docs/library/io.rst index d1f7c111fa..37e3eb7c94 100644 --- a/docs/library/uio.rst +++ b/docs/library/io.rst @@ -1,9 +1,7 @@ -:mod:`uio` -- input/output streams +:mod:`io` -- input/output streams ================================== -.. include:: ../templates/unsupported_in_circuitpython.inc - -.. module:: uio +.. module:: io :synopsis: input/output streams |see_cpython_module| :mod:`cpython:io`. diff --git a/docs/library/ujson.rst b/docs/library/json.rst similarity index 87% rename from docs/library/ujson.rst rename to docs/library/json.rst index 4ed91f053a..21574e556b 100644 --- a/docs/library/ujson.rst +++ b/docs/library/json.rst @@ -1,9 +1,7 @@ -:mod:`ujson` -- JSON encoding and decoding +:mod:`json` -- JSON encoding and decoding ========================================== -.. include:: ../templates/unsupported_in_circuitpython.inc - -.. module:: ujson +.. module:: json :synopsis: JSON encoding and decoding |see_cpython_module| :mod:`cpython:json`. diff --git a/docs/library/network.rst b/docs/library/network.rst deleted file mode 100644 index 3bd41150d5..0000000000 --- a/docs/library/network.rst +++ /dev/null @@ -1,278 +0,0 @@ -**************************************** -:mod:`network` --- network configuration -**************************************** - -.. include:: ../templates/unsupported_in_circuitpython.inc - -.. module:: network - :noindex: - :synopsis: network configuration - -This module provides network drivers and routing configuration. To use this -module, a MicroPython variant/build with network capabilities must be installed. -Network drivers for specific hardware are available within this module and are -used to configure hardware network interface(s). Network services provided -by configured interfaces are then available for use via the :mod:`usocket` -module. - -For example:: - - # connect/ show IP config a specific network interface - # see below for examples of specific drivers - import network - import utime - nic = network.Driver(...) - if not nic.isconnected(): - nic.connect() - print("Waiting for connection...") - while not nic.isconnected(): - utime.sleep(1) - print(nic.ifconfig()) - - # now use usocket as usual - import usocket as socket - addr = socket.getaddrinfo('micropython.org', 80)[0][-1] - s = socket.socket() - s.connect(addr) - s.send(b'GET / HTTP/1.1\r\nHost: micropython.org\r\n\r\n') - data = s.recv(1000) - s.close() - -Common network adapter interface -================================ - -This section describes an (implied) abstract base class for all network -interface classes implemented by ``MicroPython ports `` -for different hardware. This means that MicroPython does not actually -provide ``AbstractNIC`` class, but any actual NIC class, as described -in the following sections, implements methods as described here. - -.. class:: AbstractNIC(id=None, ...) - -Instantiate a network interface object. Parameters are network interface -dependent. If there are more than one interface of the same type, the first -parameter should be `id`. - - .. method:: active([is_active]) - - Activate ("up") or deactivate ("down") the network interface, if - a boolean argument is passed. Otherwise, query current state if - no argument is provided. Most other methods require an active - interface (behavior of calling them on inactive interface is - undefined). - - .. method:: connect([service_id, key=None, \*, ...]) - - Connect the interface to a network. This method is optional, and - available only for interfaces which are not "always connected". - If no parameters are given, connect to the default (or the only) - service. If a single parameter is given, it is the primary identifier - of a service to connect to. It may be accompanied by a key - (password) required to access said service. There can be further - arbitrary keyword-only parameters, depending on the networking medium - type and/or particular device. Parameters can be used to: a) - specify alternative service identifier types; b) provide additional - connection parameters. For various medium types, there are different - sets of predefined/recommended parameters, among them: - - * WiFi: *bssid* keyword to connect to a specific BSSID (MAC address) - - .. method:: disconnect() - - Disconnect from network. - - .. method:: isconnected() - - Returns ``True`` if connected to network, otherwise returns ``False``. - - .. method:: scan(\*, ...) - - Scan for the available network services/connections. Returns a - list of tuples with discovered service parameters. For various - network media, there are different variants of predefined/ - recommended tuple formats, among them: - - * WiFi: (ssid, bssid, channel, RSSI, authmode, hidden). There - may be further fields, specific to a particular device. - - The function may accept additional keyword arguments to filter scan - results (e.g. scan for a particular service, on a particular channel, - for services of a particular set, etc.), and to affect scan - duration and other parameters. Where possible, parameter names - should match those in connect(). - - .. method:: status() - - Return detailed status of the interface, values are dependent - on the network medium/technology. - - .. method:: ifconfig([(ip, subnet, gateway, dns)]) - - Get/set IP-level network interface parameters: IP address, subnet mask, - gateway and DNS server. When called with no arguments, this method returns - a 4-tuple with the above information. To set the above values, pass a - 4-tuple with the required information. For example:: - - nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8')) - - .. method:: config('param') - config(param=value, ...) - - Get or set general network interface parameters. These methods allow to work - with additional parameters beyond standard IP configuration (as dealt with by - `ifconfig()`). These include network-specific and hardware-specific - parameters and status values. For setting parameters, the keyword argument - syntax should be used, and multiple parameters can be set at once. For - querying, a parameter name should be quoted as a string, and only one - parameter can be queried at a time:: - - # Set WiFi access point name (formally known as ESSID) and WiFi channel - ap.config(essid='My AP', channel=11) - # Query params one by one - print(ap.config('essid')) - print(ap.config('channel')) - # Extended status information also available this way - print(sta.config('rssi')) - -.. _network.WLAN: - -Functions -========= - -.. function:: phy_mode([mode]) - - Get or set the PHY mode. - - If the *mode* parameter is provided, sets the mode to its value. If - the function is called without parameters, returns the current mode. - - The possible modes are defined as constants: - * ``MODE_11B`` -- IEEE 802.11b, - * ``MODE_11G`` -- IEEE 802.11g, - * ``MODE_11N`` -- IEEE 802.11n. - -class WLAN -========== - -This class provides a driver for WiFi network processor in the ESP8266. Example usage:: - - import network - # enable station interface and connect to WiFi access point - nic = network.WLAN(network.STA_IF) - nic.active(True) - nic.connect('your-ssid', 'your-password') - # now use sockets as usual - -Constructors ------------- -.. class:: WLAN(interface_id) - -Create a WLAN network interface object. Supported interfaces are -``network.STA_IF`` (station aka client, connects to upstream WiFi access -points) and ``network.AP_IF`` (access point, allows other WiFi clients to -connect). Availability of the methods below depends on interface type. -For example, only STA interface may `connect()` to an access point. - -Methods -------- - -.. method:: wlan.active([is_active]) - - Activate ("up") or deactivate ("down") network interface, if boolean - argument is passed. Otherwise, query current state if no argument is - provided. Most other methods require active interface. - -.. method:: wlan.connect(ssid=None, password=None, \*, bssid=None) - - Connect to the specified wireless network, using the specified password. - If *bssid* is given then the connection will be restricted to the - access-point with that MAC address (the *ssid* must also be specified - in this case). - -.. method:: wlan.disconnect() - - Disconnect from the currently connected wireless network. - -.. method:: wlan.scan() - - Scan for the available wireless networks. - - Scanning is only possible on STA interface. Returns list of tuples with - the information about WiFi access points: - - (ssid, bssid, channel, RSSI, authmode, hidden) - - *bssid* is hardware address of an access point, in binary form, returned as - bytes object. You can use `binascii.hexlify()` to convert it to ASCII form. - - There are five values for authmode: - - * 0 -- open - * 1 -- WEP - * 2 -- WPA-PSK - * 3 -- WPA2-PSK - * 4 -- WPA/WPA2-PSK - - and two for hidden: - - * 0 -- visible - * 1 -- hidden - -.. method:: wlan.status() - - Return the current status of the wireless connection. - - The possible statuses are defined as constants: - - * ``STAT_IDLE`` -- no connection and no activity, - * ``STAT_CONNECTING`` -- connecting in progress, - * ``STAT_WRONG_PASSWORD`` -- failed due to incorrect password, - * ``STAT_NO_AP_FOUND`` -- failed because no access point replied, - * ``STAT_CONNECT_FAIL`` -- failed due to other problems, - * ``STAT_GOT_IP`` -- connection successful. - -.. method:: wlan.isconnected() - - In case of STA mode, returns ``True`` if connected to a WiFi access - point and has a valid IP address. In AP mode returns ``True`` when a - station is connected. Returns ``False`` otherwise. - -.. method:: wlan.ifconfig([(ip, subnet, gateway, dns)]) - - Get/set IP-level network interface parameters: IP address, subnet mask, - gateway and DNS server. When called with no arguments, this method returns - a 4-tuple with the above information. To set the above values, pass a - 4-tuple with the required information. For example:: - - nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8')) - -.. method:: wlan.config('param') - wlan.config(param=value, ...) - - Get or set general network interface parameters. These methods allow to work - with additional parameters beyond standard IP configuration (as dealt with by - `wlan.ifconfig()`). These include network-specific and hardware-specific - parameters. For setting parameters, keyword argument syntax should be used, - multiple parameters can be set at once. For querying, parameters name should - be quoted as a string, and only one parameter can be queries at time:: - - # Set WiFi access point name (formally known as ESSID) and WiFi channel - ap.config(essid='My AP', channel=11) - # Query params one by one - print(ap.config('essid')) - print(ap.config('channel')) - - Following are commonly supported parameters (availability of a specific parameter - depends on network technology type, driver, and ``MicroPython port``). - - ============= =========== - Parameter Description - ============= =========== - mac MAC address (bytes) - essid WiFi access point name (string) - channel WiFi channel (integer) - hidden Whether ESSID is hidden (boolean) - authmode Authentication mode supported (enumeration, see module constants) - password Access password (string) - dhcp_hostname The DHCP hostname to use - ============= =========== diff --git a/docs/library/ure.rst b/docs/library/re.rst similarity index 94% rename from docs/library/ure.rst rename to docs/library/re.rst index 4af182b016..bdcc9f52c1 100644 --- a/docs/library/ure.rst +++ b/docs/library/re.rst @@ -1,9 +1,7 @@ -:mod:`ure` -- simple regular expressions +:mod:`re` -- simple regular expressions ======================================== -.. include:: ../templates/unsupported_in_circuitpython.inc - -.. module:: ure +.. module:: re :synopsis: regular expressions |see_cpython_module| :mod:`cpython:re`. @@ -77,7 +75,7 @@ Regex objects ------------- Compiled regular expression. Instances of this class are created using -`ure.compile()`. +`re.compile()`. .. method:: regex.match(string) regex.search(string) diff --git a/docs/shared_bindings_matrix.py b/docs/shared_bindings_matrix.py index f38c0b64a0..e62b1d2186 100644 --- a/docs/shared_bindings_matrix.py +++ b/docs/shared_bindings_matrix.py @@ -30,7 +30,7 @@ import sys from concurrent.futures import ThreadPoolExecutor -SUPPORTED_PORTS = ['atmel-samd', 'esp32s2', 'litex', 'mimxrt10xx', 'nrf', 'stm'] +SUPPORTED_PORTS = ['atmel-samd', 'cxd56', 'esp32s2', 'litex', 'mimxrt10xx', 'nrf', 'raspberrypi', 'stm'] def get_circuitpython_root_dir(): """ The path to the root './circuitpython' directory @@ -44,7 +44,7 @@ def get_shared_bindings(): """ Get a list of modules in shared-bindings based on folder names """ shared_bindings_dir = get_circuitpython_root_dir() / "shared-bindings" - return [item.name for item in shared_bindings_dir.iterdir()] + ["ulab"] + return [item.name for item in shared_bindings_dir.iterdir()] + ["binascii", "errno", "json", "re", "ulab"] def read_mpconfig(): diff --git a/docs/supported_ports.rst b/docs/supported_ports.rst index e74067e28f..b83ef12d35 100644 --- a/docs/supported_ports.rst +++ b/docs/supported_ports.rst @@ -13,8 +13,9 @@ is limited. ../ports/atmel-samd/README ../ports/cxd56/README + ../ports/esp32s2/README ../ports/litex/README ../ports/mimxrt10xx/README ../ports/nrf/README + ../ports/raspberrypi/README ../ports/stm/README - ../ports/esp32s2/README diff --git a/extmod/vfs.c b/extmod/vfs.c index c9c1fe3c31..420f8305f7 100644 --- a/extmod/vfs.c +++ b/extmod/vfs.c @@ -71,6 +71,7 @@ mp_vfs_mount_t *mp_vfs_lookup_path(const char *path, const char **path_out) { STATIC mp_vfs_mount_t *lookup_path(mp_obj_t path_in, mp_obj_t *path_out) { const char *path = mp_obj_str_get_str(path_in); const char *p_out; + *path_out = mp_const_none; mp_vfs_mount_t *vfs = mp_vfs_lookup_path(path, &p_out); if (vfs != MP_VFS_NONE && vfs != MP_VFS_ROOT) { *path_out = mp_obj_new_str_of_type(mp_obj_get_type(path_in), @@ -329,7 +330,7 @@ mp_obj_t mp_vfs_ilistdir(size_t n_args, const mp_obj_t *args) { path_in = MP_OBJ_NEW_QSTR(MP_QSTR_); } - mp_obj_t path_out; + mp_obj_t path_out = mp_const_none; mp_vfs_mount_t *vfs = lookup_path(path_in, &path_out); if (vfs == MP_VFS_ROOT) { @@ -359,7 +360,7 @@ mp_obj_t mp_vfs_listdir(size_t n_args, const mp_obj_t *args) { MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(mp_vfs_listdir_obj, 0, 1, mp_vfs_listdir); mp_obj_t mp_vfs_mkdir(mp_obj_t path_in) { - mp_obj_t path_out; + mp_obj_t path_out = mp_const_none; mp_vfs_mount_t *vfs = lookup_path(path_in, &path_out); if (vfs == MP_VFS_ROOT || (vfs != MP_VFS_NONE && !strcmp(mp_obj_str_get_str(path_out), "/"))) { mp_raise_OSError(MP_EEXIST); diff --git a/lib/protomatter b/lib/protomatter index 902c16f491..5e925cea7a 160000 --- a/lib/protomatter +++ b/lib/protomatter @@ -1 +1 @@ -Subproject commit 902c16f49197a8baf5e71ec924a812a86e733a74 +Subproject commit 5e925cea7a55273e375a6129761cb29b4e750d4f diff --git a/lib/tinyusb b/lib/tinyusb index cfcffe94ce..045674745a 160000 --- a/lib/tinyusb +++ b/lib/tinyusb @@ -1 +1 @@ -Subproject commit cfcffe94ce62f5ef1fb5aef4641924d64dc4b1c0 +Subproject commit 045674745afa59028fbeed6dac5cb5a9c4a6033e diff --git a/locale/ID.po b/locale/ID.po index 6aa4f0fba2..7ae5b50bd4 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-03 05:29+0000\n" +"PO-Revision-Date: 2021-01-15 19:49+0000\n" "Last-Translator: oon arfiandwi \n" "Language-Team: LANGUAGE \n" "Language: ID\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -48,6 +48,10 @@ msgstr " File \"%q\"" msgid " File \"%q\", line %d" msgstr " File \"%q\", baris %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr "output:\n" @@ -869,6 +873,10 @@ msgstr "Channel EXTINT sedang digunakan" msgid "Error in regex" msgstr "Error pada regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1261,10 +1269,18 @@ msgstr "security_mode tidak valid" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Suara tidak valid" @@ -1281,6 +1297,10 @@ msgstr "File wave tidak valid" msgid "Invalid word/bit length" msgstr "Panjang kata/bit tidak valid" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Panjang kunci harus 16, 24, atau 32 byte" @@ -1569,7 +1589,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2054,38 +2074,41 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" -msgstr "" +msgstr "Kesalahan gatt tidak dikenal: 0x%04x" #: supervisor/shared/safe_mode.c msgid "Unknown reason." -msgstr "" +msgstr "Alasan yang tidak diketahui." #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown security error: 0x%04x" -msgstr "" +msgstr "Kesalahan keamanan tidak dikenal: 0x%04x" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown soft device error: %04x" -msgstr "" +msgstr "Kesalahan perangkat lunak tidak dikenal: %04x" #: shared-bindings/_pixelbuf/PixelBuf.c #, c-format msgid "Unmatched number of items on RHS (expected %d, got %d)." -msgstr "" +msgstr "Jumlah item pada RHS tidak cocok (diharapkan %d, didapatkan %d)." #: ports/nrf/common-hal/_bleio/__init__.c msgid "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." msgstr "" +"Masalah yang tidak ditentukan. Bisa jadi permintaan pemasangan pada " +"perangkat lain ditolak atau diabaikan." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c #: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c @@ -2099,15 +2122,15 @@ msgstr "Baudrate tidak didukung" #: shared-module/audiocore/WaveFile.c msgid "Unsupported format" -msgstr "" +msgstr "Format tidak didukung" #: py/moduerrno.c msgid "Unsupported operation" -msgstr "" +msgstr "Operasi yang tidak didukung" #: shared-bindings/digitalio/DigitalInOut.c msgid "Unsupported pull value." -msgstr "" +msgstr "Nilai tarikan yang tidak didukung." #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Update Failed" @@ -2116,12 +2139,12 @@ msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length != required fixed length" -msgstr "" +msgstr "Panjang nilai != Panjang tetap yang dibutuhkan" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length > max_length" -msgstr "" +msgstr "Panjang nilai > max_length" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Version was invalid" @@ -2129,11 +2152,11 @@ msgstr "" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" -msgstr "" +msgstr "Fungsi Viper saat ini tidak mendukung lebih dari 4 argumen" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Voltage read timed out" -msgstr "" +msgstr "Tegangan baca habis waktu" #: main.c msgid "WARNING: Your code filename has two extensions\n" @@ -2185,11 +2208,11 @@ msgstr "" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" -msgstr "" +msgstr "Menulis tidak didukung pada Karakteristik" #: supervisor/shared/safe_mode.c msgid "You are in safe mode: something unanticipated happened.\n" -msgstr "" +msgstr "Anda berada dalam mode aman: sesuatu yang tidak terduga terjadi.\n" #: supervisor/shared/safe_mode.c msgid "You requested starting safe mode by " @@ -2197,7 +2220,7 @@ msgstr "Anda mengajukan untuk memulai mode aman pada (safe mode) pada " #: py/objtype.c msgid "__init__() should return None" -msgstr "" +msgstr "__init __() harus mengembalikan None" #: py/objtype.c msgid "__init__() should return None, not '%q'" @@ -2205,7 +2228,7 @@ msgstr "" #: py/objobject.c msgid "__new__ arg must be a user-type" -msgstr "" +msgstr "__new__ arg harus berupa user-type" #: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c msgid "a bytes-like object is required" @@ -2222,19 +2245,19 @@ msgstr "alamat %08x tidak selaras dengan %d bytes" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "address out of bounds" -msgstr "" +msgstr "alamat di luar batas" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "addresses is empty" -msgstr "" +msgstr "alamatnya kosong" #: py/modbuiltins.c msgid "arg is an empty sequence" -msgstr "" +msgstr "arg berisi urutan kosong" #: extmod/ulab/code/numerical/numerical.c msgid "argsort argument must be an ndarray" -msgstr "" +msgstr "Argumen argsort harus berupa ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "argsort is not implemented for flattened arrays" @@ -2242,7 +2265,7 @@ msgstr "" #: py/runtime.c msgid "argument has wrong type" -msgstr "" +msgstr "argumen memiliki tipe yang salah" #: extmod/ulab/code/linalg/linalg.c msgid "argument must be ndarray" @@ -2255,11 +2278,11 @@ msgstr "argumen num/types tidak cocok" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" -msgstr "" +msgstr "argumen harus berupa '%q' bukan '%q'" #: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c msgid "arguments must be ndarrays" -msgstr "" +msgstr "argumen harus berupa ndarrays" #: extmod/ulab/code/ndarray.c msgid "array and index length must be equal" @@ -2268,7 +2291,7 @@ msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c #: shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" -msgstr "" +msgstr "diperlukan array/byte di sisi kanan" #: extmod/ulab/code/numerical/numerical.c msgid "attempt to get (arg)min/(arg)max of empty sequence" @@ -2276,11 +2299,11 @@ msgstr "" #: extmod/ulab/code/numerical/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" -msgstr "" +msgstr "berusaha mendapatkan argmin/argmax dari urutan kosong" #: py/objstr.c msgid "attributes not supported yet" -msgstr "" +msgstr "atribut belum didukung" #: extmod/ulab/code/numerical/numerical.c msgid "axis is out of bounds" @@ -2300,7 +2323,7 @@ msgstr "mode compile buruk" #: py/objstr.c msgid "bad conversion specifier" -msgstr "" +msgstr "specifier salah konversi" #: py/objstr.c msgid "bad format string" @@ -2326,10 +2349,18 @@ msgstr "" msgid "branch not in range" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c #, fuzzy msgid "buffer size must match format" @@ -3332,6 +3363,10 @@ msgstr "" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3388,6 +3423,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c #, fuzzy msgid "offset out of bounds" @@ -3944,6 +3983,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index c321db0021..ad605a2dbf 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -43,6 +43,10 @@ msgstr "" msgid " File \"%q\", line %d" msgstr "" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr "" @@ -54,7 +58,8 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format -msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" +msgid "" +"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" #: ports/atmel-samd/common-hal/sdioio/SDCard.c @@ -512,7 +517,6 @@ msgstr "" msgid "Buffer must be a multiple of 512 bytes" msgstr "" -#: shared-bindings/adafruit_bus_device/I2CDevice.c #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" msgstr "" @@ -527,6 +531,7 @@ msgid "Buffer too short by %d bytes" msgstr "" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c +#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" @@ -796,6 +801,10 @@ msgstr "" msgid "Data 0 pin must be byte aligned" msgstr "" +#: ports/esp32s2/common-hal/displayio/ParallelBus.c +msgid "Data 0 pin must be byte aligned." +msgstr "" + #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" msgstr "" @@ -850,6 +859,10 @@ msgstr "" msgid "Error in regex" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1240,10 +1253,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1260,6 +1281,10 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1542,7 +1567,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -1564,7 +1589,6 @@ msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" -#: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" @@ -3300,6 +3324,10 @@ msgstr "" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3694,6 +3722,10 @@ msgstr "" msgid "threshold must be in the range 0-65536" msgstr "" +#: shared-bindings/rgbmatrix/RGBMatrix.c +msgid "tile must be greater than zero" +msgstr "" + #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" msgstr "" @@ -3914,6 +3946,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index a27a1459a1..d7ab891b6e 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -46,6 +46,10 @@ msgstr " Soubor \"%q\"" msgid " File \"%q\", line %d" msgstr " Soubor \"%q\", řádek %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " výstup:\n" @@ -853,6 +857,10 @@ msgstr "" msgid "Error in regex" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1243,10 +1251,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1263,6 +1279,10 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1545,7 +1565,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2016,7 +2036,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2281,10 +2302,18 @@ msgstr "" msgid "branch not in range" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" @@ -3286,6 +3315,10 @@ msgstr "" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3342,6 +3375,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" @@ -3896,6 +3933,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 350c7aac1a..25321f63eb 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -47,6 +47,10 @@ msgstr " Datei \"%q\"" msgid " File \"%q\", line %d" msgstr " Datei \"%q\", Zeile %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " Ausgabe:\n" @@ -865,6 +869,10 @@ msgstr "EXTINT Kanal ist schon in Benutzung" msgid "Error in regex" msgstr "Fehler in regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1260,10 +1268,18 @@ msgstr "Ungültiger security_mode" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ungültige Stimme" @@ -1280,6 +1296,10 @@ msgstr "Ungültige wave Datei" msgid "Invalid word/bit length" msgstr "Ungültige Wort- / Bitlänge" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Der Schlüssel muss 16, 24 oder 32 Byte lang sein" @@ -1570,7 +1590,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2058,7 +2078,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2338,10 +2359,18 @@ msgstr "Es müssen 8 oder 16 bits_per_sample sein" msgid "branch not in range" msgstr "Zweig ist außerhalb der Reichweite" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "Puffer muss ein bytes-artiges Objekt sein" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "Die Puffergröße muss zum Format passen" @@ -3363,6 +3392,10 @@ msgstr "Nicht genügend Argumente für den Formatierungs-String" msgid "number of points must be at least 2" msgstr "Die Anzahl der Punkte muss mindestens 2 betragen" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3419,6 +3452,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset außerhalb der Grenzen" @@ -3983,6 +4020,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "Fenster muss <= Intervall sein" diff --git a/locale/el.po b/locale/el.po index 7001c2aa23..104dff4ee5 100644 --- a/locale/el.po +++ b/locale/el.po @@ -43,6 +43,10 @@ msgstr "" msgid " File \"%q\", line %d" msgstr "" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr "" @@ -850,6 +854,10 @@ msgstr "" msgid "Error in regex" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1240,10 +1248,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1260,6 +1276,10 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1542,7 +1562,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2013,7 +2033,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2278,10 +2299,18 @@ msgstr "" msgid "branch not in range" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" @@ -3283,6 +3312,10 @@ msgstr "" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3339,6 +3372,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" @@ -3893,6 +3930,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/es.po b/locale/es.po index 45695665c1..58634a597e 100644 --- a/locale/es.po +++ b/locale/es.po @@ -48,6 +48,10 @@ msgstr " Archivo \"%q\"" msgid " File \"%q\", line %d" msgstr " Archivo \"%q\", línea %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " salida:\n" @@ -868,6 +872,10 @@ msgstr "El canal EXTINT ya está siendo utilizado" msgid "Error in regex" msgstr "Error en regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1261,10 +1269,18 @@ msgstr "'security_mode' no válido" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Voz inválida" @@ -1281,6 +1297,10 @@ msgstr "Archivo wave inválido" msgid "Invalid word/bit length" msgstr "Tamaño no válido de palabra/bit" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "La llave debe tener 16, 24 o 32 bytes de longitud" @@ -1569,7 +1589,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "Se acabaron los enchufes" @@ -2063,8 +2083,9 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Error no manejado de ESP TLS %d %d %x %d" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" -msgstr "Fallo desconocido" +#, c-format +msgid "Unknown failure %d" +msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2339,10 +2360,18 @@ msgstr "bits_per_sample debe ser 8 ó 16" msgid "branch not in range" msgstr "la rama no está dentro del rango" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "buffer debe de ser un objeto bytes-like" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "el tamaño del buffer debe de coincidir con el formato" @@ -3357,6 +3386,10 @@ msgstr "no suficientes argumentos para format string" msgid "number of points must be at least 2" msgstr "el número de puntos debe ser al menos 2" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "objeto '%q' no es tupla o lista" @@ -3413,6 +3446,10 @@ msgstr "offset es demasiado grande" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset fuera de límites" @@ -3970,6 +4007,10 @@ msgstr "el tiempo de espera del perro guardián debe ser mayor a 0" msgid "width must be greater than zero" msgstr "el ancho debe ser mayor que cero" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "la ventana debe ser <= intervalo" @@ -4034,6 +4075,9 @@ msgstr "zi debe ser de tipo flotante" msgid "zi must be of shape (n_section, 2)" msgstr "zi debe ser una forma (n_section,2)" +#~ msgid "Unknown failure" +#~ msgstr "Fallo desconocido" + #~ msgid "input argument must be an integer or a 2-tuple" #~ msgstr "el argumento de entrada debe ser un entero o una tupla de par" diff --git a/locale/fil.po b/locale/fil.po index ddd5f3dfe4..cd59ad213d 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -42,6 +42,10 @@ msgstr " File \"%q\"" msgid " File \"%q\", line %d" msgstr " File \"%q\", line %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " output:\n" @@ -861,6 +865,10 @@ msgstr "Ginagamit na ang EXTINT channel" msgid "Error in regex" msgstr "May pagkakamali sa REGEX" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1255,10 +1263,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1275,6 +1291,10 @@ msgstr "May hindi tama sa wave file" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1560,7 +1580,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2034,7 +2054,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2308,10 +2329,18 @@ msgstr "bits_per_sample ay dapat 8 o 16" msgid "branch not in range" msgstr "branch wala sa range" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "buffer ay dapat bytes-like object" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c #, fuzzy msgid "buffer size must match format" @@ -3330,6 +3359,10 @@ msgstr "kulang sa arguments para sa format string" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3386,6 +3419,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c #, fuzzy msgid "offset out of bounds" @@ -3946,6 +3983,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index ad0ed6e7af..1c47148259 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,14 +8,14 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-13 16:07+0000\n" +"PO-Revision-Date: 2021-01-17 12:55+0000\n" "Last-Translator: Hugo Dahl \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -52,6 +52,10 @@ msgstr " Fichier \"%q\"" msgid " File \"%q\", line %d" msgstr " Fichier \"%q\", ligne %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " sortie :\n" @@ -646,7 +650,7 @@ msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" -"Impossible d'affecter une valeur quand la direction est entrentre ('input')." +"Impossible d'affecter une valeur quand la direction est entrante ('input')." #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c @@ -882,6 +886,10 @@ msgstr "Canal EXTINT déjà utilisé" msgid "Error in regex" msgstr "Erreur dans l'expression régulière" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1277,10 +1285,18 @@ msgstr "'security_mode' invalide" msgid "Invalid size" msgstr "Taille invalide" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "État invalide" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Voix invalide" @@ -1297,6 +1313,10 @@ msgstr "Fichier WAVE invalide" msgid "Invalid word/bit length" msgstr "Longueur de mot / bit invalide" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "La clé doit comporter 16, 24 ou 32 octets" @@ -1585,7 +1605,7 @@ msgstr "Timeout de l'opération" msgid "Out of memory" msgstr "Hors de mémoire" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "Plus de sockets" @@ -2085,8 +2105,9 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Erreur ESP TLS non gérée %d %d %x %d" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" -msgstr "Echec inconnu" +#, c-format +msgid "Unknown failure %d" +msgstr "Échec inconnu %d" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2363,10 +2384,18 @@ msgstr "'bits_per_sample' doivent être 8 ou 16" msgid "branch not in range" msgstr "branche hors-bornes" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "tampon est plus petit que la taille demandée" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "le tampon doit être un objet bytes-like" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "taille du tampon doit être un multiple de la taille de l'élement" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "la taille du tampon doit correspondre au format" @@ -3390,6 +3419,10 @@ msgstr "pas assez d'arguments pour la chaîne de format" msgid "number of points must be at least 2" msgstr "le nombre de points doit être d'au moins 2" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "l'objet '%q' n'est pas un tuple ou une list" @@ -3446,6 +3479,10 @@ msgstr "offset est trop large" msgid "offset must be >= 0" msgstr "offset doit être >= 0" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "offset doit être non-négatif, et au plus la taille du tampon" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "décalage hors limites" @@ -4006,6 +4043,10 @@ msgstr "watchdog timeout doit être supérieur à 0" msgid "width must be greater than zero" msgstr "width doit être plus grand que zero" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "la fenêtre (window) doit être <= intervalle (interval)" @@ -4070,6 +4111,9 @@ msgstr "zi doit être de type float" msgid "zi must be of shape (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)" +#~ msgid "Unknown failure" +#~ msgstr "Echec inconnu" + #~ msgid "Only one alarm.touch alarm can be set." #~ msgstr "Seulement une alarme alarm.touch peut être réglée." diff --git a/locale/hi.po b/locale/hi.po index 618490b378..f9fa68f5c8 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -43,6 +43,10 @@ msgstr "" msgid " File \"%q\", line %d" msgstr "" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr "" @@ -850,6 +854,10 @@ msgstr "" msgid "Error in regex" msgstr "" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1240,10 +1248,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1260,6 +1276,10 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1542,7 +1562,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2013,7 +2033,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2278,10 +2299,18 @@ msgstr "" msgid "branch not in range" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" @@ -3283,6 +3312,10 @@ msgstr "" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3339,6 +3372,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" @@ -3893,6 +3930,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index f9f77b20ef..e6402f9294 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -42,6 +42,10 @@ msgstr " File \"%q\"" msgid " File \"%q\", line %d" msgstr " File \"%q\", riga %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " output:\n" @@ -861,6 +865,10 @@ msgstr "Canale EXTINT già in uso" msgid "Error in regex" msgstr "Errore nella regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1257,10 +1265,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1278,6 +1294,10 @@ msgstr "File wave non valido" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1565,7 +1585,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2046,7 +2066,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2314,10 +2335,18 @@ msgstr "i bit devono essere 7, 8 o 9" msgid "branch not in range" msgstr "argomento di chr() non è in range(256)" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c #, fuzzy msgid "buffer size must match format" @@ -3336,6 +3365,10 @@ msgstr "argomenti non sufficienti per la stringa di formattazione" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3392,6 +3425,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c #, fuzzy msgid "offset out of bounds" @@ -3954,6 +3991,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 37d23f9594..42c882e9a4 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -48,6 +48,10 @@ msgstr " ファイル \"%q\"" msgid " File \"%q\", line %d" msgstr " ファイル \"%q\", 行 %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " 出力:\n" @@ -861,6 +865,10 @@ msgstr "EXTINTチャネルはすでに使用されています" msgid "Error in regex" msgstr "正規表現にエラーがあります" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1253,10 +1261,18 @@ msgstr "不正なsecurity_mode" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "不正なボイス" @@ -1273,6 +1289,10 @@ msgstr "不正なwaveファイル" msgid "Invalid word/bit length" msgstr "不正なワード/ビット長" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Keyの長さは、16, 24, 32バイトのいずれかでなければなりません" @@ -1557,7 +1577,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2036,7 +2056,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2301,10 +2322,18 @@ msgstr "bits_per_sampleは8または16でなければなりません" msgid "branch not in range" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "バッファはbytes-likeオブジェクトでなければなりません" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" @@ -3311,6 +3340,10 @@ msgstr "書式化文字列への引数が足りません" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "オブジェクト'%q'がタプルやリストでありません" @@ -3367,6 +3400,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" @@ -3924,6 +3961,10 @@ msgstr "watchdogのtimeoutは0以上でなければなりません" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "windowはinterval以下でなければなりません" diff --git a/locale/ko.po b/locale/ko.po index b7fc29629b..97de46fcd5 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -44,6 +44,10 @@ msgstr " 파일 \"%q\"" msgid " File \"%q\", line %d" msgstr " 파일 \"%q\", 라인 %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " 산출:\n" @@ -853,6 +857,10 @@ msgstr "" msgid "Error in regex" msgstr "Regex에 오류가 있습니다." +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1243,10 +1251,18 @@ msgstr "" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1263,6 +1279,10 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1545,7 +1565,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -2017,7 +2037,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2282,10 +2303,18 @@ msgstr "bits_per_sample은 8 또는 16이어야합니다." msgid "branch not in range" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" @@ -3287,6 +3316,10 @@ msgstr "" msgid "number of points must be at least 2" msgstr "" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3343,6 +3376,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" @@ -3897,6 +3934,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 52984373c2..58cc8e6030 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -46,6 +46,10 @@ msgstr " Bestand" msgid " File \"%q\", line %d" msgstr " Bestand \"%q\", regel %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " uitvoer:\n" @@ -861,6 +865,10 @@ msgstr "EXTINT kanaal al in gebruik" msgid "Error in regex" msgstr "Fout in regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1254,10 +1262,18 @@ msgstr "Ongeldige security_mode" msgid "Invalid size" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ongeldige stem" @@ -1274,6 +1290,10 @@ msgstr "Ongeldig wave bestand" msgid "Invalid word/bit length" msgstr "Ongeldig woord/bit lengte" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Sleutel moet 16, 24, of 32 bytes lang zijn" @@ -1562,7 +1582,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "Geen sockets meer beschikbaar" @@ -2055,8 +2075,9 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Niet behandelde ESP TLS fout %d %d %x %d" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" -msgstr "Onbekende fout" +#, c-format +msgid "Unknown failure %d" +msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2331,10 +2352,18 @@ msgstr "bits_per_sample moet 8 of 16 zijn" msgid "branch not in range" msgstr "pad (branch) niet binnen bereik" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "buffer moet een byte-achtig object zijn" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "grootte van de buffer moet overeenkomen met het formaat" @@ -3344,6 +3373,10 @@ msgstr "niet genoeg argumenten om string te formatteren" msgid "number of points must be at least 2" msgstr "aantal punten moet minimaal 2 zijn" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "object '%q' is geen tuple of lijst" @@ -3400,6 +3433,10 @@ msgstr "compensatie is te groot" msgid "offset must be >= 0" msgstr "compensatie moet groter of gelijk 0 zijn" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset buiten bereik" @@ -3957,6 +3994,10 @@ msgstr "watchdog time-out moet groter zijn dan 0" msgid "width must be greater than zero" msgstr "breedte moet groter dan nul zijn" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "window moet <= interval zijn" @@ -4021,6 +4062,9 @@ msgstr "zi moet van type float zijn" msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" +#~ msgid "Unknown failure" +#~ msgstr "Onbekende fout" + #~ msgid "input argument must be an integer or a 2-tuple" #~ msgstr "invoerargument moet een integer of 2-tuple zijn" diff --git a/locale/pl.po b/locale/pl.po index 41eee9e745..14a57b4ea2 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-12-02 20:29+0000\n" +"PO-Revision-Date: 2021-01-20 02:40+0000\n" "Last-Translator: Maciej Stankiewicz \n" "Language-Team: pl\n" "Language: pl\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 " "|| n%100>=20) ? 1 : 2;\n" -"X-Generator: Weblate 4.4-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -48,6 +48,10 @@ msgstr " Plik \"%q\"" msgid " File \"%q\", line %d" msgstr " Plik \"%q\", linia %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr "" + #: main.c msgid " output:\n" msgstr " wyjście:\n" @@ -770,7 +774,7 @@ msgstr "Nie można rozpocząć przerwania, RX jest zajęty" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" -msgstr "" +msgstr "Nie udało się przydzielić dekodera" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c @@ -861,6 +865,10 @@ msgstr "Kanał EXTINT w użyciu" msgid "Error in regex" msgstr "Błąd w regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1070,7 +1078,7 @@ msgstr "Niewłaściwa wielkość bufora" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" -msgstr "" +msgstr "Inicjalizacja nie powiodła się z powodu braku pamięci" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" @@ -1251,10 +1259,18 @@ msgstr "Nieprawidłowy security_mode" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid size" +msgstr "Nieprawidłowy rozmiar" + +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" msgstr "" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" +msgstr "Nieprawidłowy stan" + +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" msgstr "" #: shared-bindings/audiomixer/Mixer.c @@ -1273,6 +1289,10 @@ msgstr "Zły plik wave" msgid "Invalid word/bit length" msgstr "Niepoprawna długość słowa/bitu" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Klucz musi mieć długość 16, 24 lub 32 bajtów" @@ -1554,9 +1574,9 @@ msgstr "" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Out of memory" -msgstr "" +msgstr "Brak pamięci" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "" @@ -1707,7 +1727,7 @@ msgstr "Obiekt tylko do odczytu" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Received response was invalid" -msgstr "" +msgstr "Otrzymana odpowiedź była nieprawidłowa" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" @@ -1723,7 +1743,7 @@ msgstr "Żądany tryb AES nie jest obsługiwany" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Requested resource not found" -msgstr "" +msgstr "Nie znaleziono żądanego zasobu" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" @@ -2027,7 +2047,8 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" +#, c-format +msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c @@ -2298,10 +2319,18 @@ msgstr "bits_per_sample musi być 8 lub 16" msgid "branch not in range" msgstr "skok poza zakres" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "bufor mysi być typu bytes" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "wielkość bufora musi pasować do formatu" @@ -3304,6 +3333,10 @@ msgstr "nie dość argumentów przy formatowaniu" msgid "number of points must be at least 2" msgstr "liczba punktów musi wynosić co najmniej 2" +#: py/builtinhelp.c +msgid "object " +msgstr "" + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" @@ -3360,6 +3393,10 @@ msgstr "" msgid "offset must be >= 0" msgstr "" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset poza zakresem" @@ -3916,6 +3953,10 @@ msgstr "" msgid "width must be greater than zero" msgstr "" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 64723c1938..92d46a4cf9 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-13 02:19+0000\n" +"PO-Revision-Date: 2021-01-22 15:30+0000\n" "Last-Translator: Wellington Terumi Uemura \n" "Language-Team: \n" "Language: pt_BR\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -50,6 +50,10 @@ msgstr " Arquivo \"%q\"" msgid " File \"%q\", line %d" msgstr " Arquivo \"%q\", linha %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr " é do tipo %q\n" + #: main.c msgid " output:\n" msgstr " saída:\n" @@ -877,6 +881,10 @@ msgstr "Canal EXTINT em uso" msgid "Error in regex" msgstr "Erro no regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "Erro: Falha na vinculação" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1270,10 +1278,18 @@ msgstr "O Security_mode é inválido" msgid "Invalid size" msgstr "Tamanho inválido" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "Soquete inválido para o TLS" + #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "Estado inválido" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "Uso inválido do soquete TLS" + #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "A voz é inválida" @@ -1290,6 +1306,10 @@ msgstr "Aqruivo de ondas inválido" msgid "Invalid word/bit length" msgstr "O comprimento do bit/palavra são inválidos" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "Problema na configuração do SO_REUSEADDR" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "A chave deve ter 16, 24 ou 32 bytes de comprimento" @@ -1577,7 +1597,7 @@ msgstr "A operação expirou" msgid "Out of memory" msgstr "Sem memória" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "Sem soquetes" @@ -2078,8 +2098,9 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Erro não tratado do ESP TLS %d %d %x %d" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" -msgstr "Falha desconhecida" +#, c-format +msgid "Unknown failure %d" +msgstr "Falha desconhecida %d" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2355,10 +2376,18 @@ msgstr "bits_per_sample deve ser 8 ou 16" msgid "branch not in range" msgstr "ramo fora do alcance" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "o tamanho do buffer é menor do que o tamanho que foi solicitado" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "o buffer deve ser um objeto como bytes" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "o tamanho do buffer deve ser um múltiplo do tamanho do elemento" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "o tamanho do buffer deve coincidir com o formato" @@ -3375,6 +3404,10 @@ msgstr "argumentos insuficientes para o formato da string" msgid "number of points must be at least 2" msgstr "a quantidade dos pontos deve ser pelo menos 2" +#: py/builtinhelp.c +msgid "object " +msgstr "objeto " + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "o objeto '%q' não é uma tupla ou uma lista" @@ -3431,6 +3464,10 @@ msgstr "o offset é muito grande" msgid "offset must be >= 0" msgstr "o offset deve ser >= 0" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "o offset deve ser positivo e não maior do que o comprimento do buffer" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "desvio fora dos limites" @@ -3992,6 +4029,10 @@ msgstr "o tempo limite do watchdog deve ser maior que 0" msgid "width must be greater than zero" msgstr "a largura deve ser maior que zero" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "o wifi não está ativo" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "a janela deve ser <= intervalo" @@ -4056,6 +4097,9 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "Unknown failure" +#~ msgstr "Falha desconhecida" + #~ msgid "Only one alarm.touch alarm can be set." #~ msgstr "Apenas um alarme alarm.touch pode ser definido." diff --git a/locale/sv.po b/locale/sv.po index 477664972c..c3b55d5a03 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-05 21:03+0000\n" +"PO-Revision-Date: 2021-01-25 19:32+0000\n" "Last-Translator: Jonny Bergdahl \n" "Language-Team: LANGUAGE \n" "Language: sv\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -50,6 +50,10 @@ msgstr " Filen \"%q\"" msgid " File \"%q\", line %d" msgstr " Fil \"%q\", rad %d" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr " är av typen %q\n" + #: main.c msgid " output:\n" msgstr " utdata:\n" @@ -123,7 +127,7 @@ msgstr "%q() kräver %d positionsargument men %d gavs" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format msgid "%s error 0x%x" -msgstr "" +msgstr "%s fel 0x%x" #: py/argcheck.c msgid "'%q' argument required" @@ -289,7 +293,7 @@ msgstr "3-arguments pow() stöds inte" #: shared-module/msgpack/__init__.c msgid "64 bit types" -msgstr "" +msgstr "64-bitars typer" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c @@ -555,7 +559,7 @@ msgstr "CBC-block måste vara multiplar om 16 byte" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "CRC or checksum was invalid" -msgstr "" +msgstr "CRC eller checksumma var ogiltig" #: py/objtype.c msgid "Call super().__init__() before accessing native object." @@ -866,6 +870,10 @@ msgstr "EXTINT-kanalen används redan" msgid "Error in regex" msgstr "Fel i regex" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "Fel: Bind misslyckades" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -1014,7 +1022,7 @@ msgstr "Funktion kräver lås" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Generic Failure" -msgstr "" +msgstr "Generiskt fel" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c @@ -1256,11 +1264,19 @@ msgstr "Ogiltigt säkerhetsläge" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid size" -msgstr "" +msgstr "Ogiltig storlek" + +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "Ogiltig socket för TLS" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" -msgstr "" +msgstr "Ogiltigt tillstånd" + +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "Ogiltig användning av TLS Socket" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" @@ -1278,6 +1294,10 @@ msgstr "Ogiltig wave-fil" msgid "Invalid word/bit length" msgstr "Ogiltig word-/bitlängd" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "Misslyckades att sätta SO_REUSEADDR" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Nyckeln måste vara 16, 24 eller 32 byte lång" @@ -1304,7 +1324,7 @@ msgstr "Length måste vara positiv" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "MAC address was invalid" -msgstr "" +msgstr "MAC-adressen var ogiltig" #: shared-module/bitbangio/SPI.c msgid "MISO pin init failed." @@ -1540,7 +1560,7 @@ msgstr "" #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c msgid "Only one TouchAlarm can be set in deep sleep." -msgstr "" +msgstr "Endast ett TouchAlarm kan ställas in för djupsömn." #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c msgid "Only one alarm.time alarm can be set." @@ -1556,17 +1576,17 @@ msgstr "Endast raw int stöds för ip" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Operation or feature not supported" -msgstr "" +msgstr "Operation eller funktion stöds inte" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Operation timed out" -msgstr "" +msgstr "Åtgärden orsakade timeout" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Out of memory" -msgstr "" +msgstr "Slut på minne" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "Slut på sockets" @@ -1576,7 +1596,7 @@ msgstr "Översampling måste vara multipel av 8." #: shared-bindings/audiobusio/PDMIn.c msgid "PDMIn not available" -msgstr "" +msgstr "PDMIn inte tillgänglig" #: shared-bindings/pwmio/PWMOut.c msgid "" @@ -1598,7 +1618,7 @@ msgstr "ParallelBus stöds ännu inte" #: ports/esp32s2/common-hal/audiobusio/__init__.c msgid "Peripheral in use" -msgstr "" +msgstr "Periferi i bruk" #: py/moduerrno.c msgid "Permission denied" @@ -1728,7 +1748,7 @@ msgstr "Skrivskyddat objekt" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Received response was invalid" -msgstr "" +msgstr "Mottaget svar var ogiltigt" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" @@ -1744,7 +1764,7 @@ msgstr "Det begärda AES-läget stöds inte" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Requested resource not found" -msgstr "" +msgstr "Begärd resurs hittades inte" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" @@ -2058,8 +2078,9 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Ej hanterat ESP TLS-fel %d-%d-%x-%d" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" -msgstr "Okänt fel" +#, c-format +msgid "Unknown failure %d" +msgstr "Okänt fel %d" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2130,7 +2151,7 @@ msgstr "Värdets längd > max_length" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Version was invalid" -msgstr "" +msgstr "Versionen var ogiltig" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" @@ -2331,10 +2352,18 @@ msgstr "bits_per_sample måste vara 8 eller 16" msgid "branch not in range" msgstr "branch utanför räckvidd" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "bufferten är mindre än begärd storlek" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "buffer måste vara en byte-liknande objekt" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "buffertstorlek måste vara en multipel av elementstorlek" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "buffertstorleken måste matcha formatet" @@ -2544,7 +2573,7 @@ msgstr "circle kan endast registreras i en förälder" #: shared-bindings/msgpack/ExtType.c msgid "code outside range 0~127" -msgstr "" +msgstr "kod utanför intervallet 0~127" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" @@ -2632,7 +2661,7 @@ msgstr "standard \"except\" måste ligga sist" #: shared-bindings/msgpack/__init__.c msgid "default is not a function" -msgstr "" +msgstr "default är inte en funktion" #: shared-bindings/audiobusio/PDMIn.c msgid "" @@ -2738,7 +2767,7 @@ msgstr "förväntar nyckel:värde för dict" #: shared-bindings/msgpack/__init__.c msgid "ext_hook is not a function" -msgstr "" +msgstr "ext_hook är inte en funktion" #: py/argcheck.c msgid "extra keyword arguments given" @@ -3277,7 +3306,7 @@ msgstr "ingen bindning för ickelokal hittad" #: shared-module/msgpack/__init__.c msgid "no default packer" -msgstr "" +msgstr "ingen standardpackare" #: py/builtinimport.c msgid "no module named '%q'" @@ -3344,6 +3373,10 @@ msgstr "inte tillräckligt med argument för formatsträng" msgid "number of points must be at least 2" msgstr "antal punkter måste vara minst 2" +#: py/builtinhelp.c +msgid "object " +msgstr "objekt " + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "objektet '%q' är inte en tuple eller list" @@ -3400,6 +3433,10 @@ msgstr "offset är för stor" msgid "offset must be >= 0" msgstr "offset måste vara >= 0" +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "offset måste vara icke-negativt och inte längre än buffertlängd" + #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset utanför gränserna" @@ -3619,7 +3656,7 @@ msgstr "shape måste vara en tuple" #: shared-module/msgpack/__init__.c msgid "short read" -msgstr "" +msgstr "kort läsning" #: py/objstr.c msgid "sign not allowed in string format specifier" @@ -3957,6 +3994,10 @@ msgstr "watchdog timeout måste vara större än 0" msgid "width must be greater than zero" msgstr "width måste vara större än noll" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "wifi är inte aktiverat" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "window måste vara <= interval" @@ -3995,7 +4036,7 @@ msgstr "x-värde utanför intervall" #: ports/esp32s2/common-hal/audiobusio/__init__.c msgid "xTaskCreate failed" -msgstr "" +msgstr "xTaskCreate misslyckades" #: shared-bindings/displayio/Shape.c msgid "y should be an int" @@ -4021,6 +4062,9 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "Unknown failure" +#~ msgstr "Okänt fel" + #~ msgid "Only one alarm.touch alarm can be set." #~ msgstr "Endast ett larm av typ alarm.touch kan ställas in." diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index d9a750b348..c2ff040449 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-11-19 01:28+0000\n" +"PO-Revision-Date: 2021-01-25 19:32+0000\n" "Last-Translator: hexthat \n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -15,19 +15,23 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.4-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" "\n" "Code done running.\n" msgstr "" +"\n" +"Dàimǎ yùnxíng wánbì.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload.\n" msgstr "" +"\n" +"zì dòng chóng xīn jiā zǎi tíng zhǐ de dài mǎ.\n" #: supervisor/shared/safe_mode.c msgid "" @@ -47,6 +51,10 @@ msgstr " Wénjiàn \"%q\"" msgid " File \"%q\", line %d" msgstr " Wénjiàn \"%q\", dì %d xíng" +#: py/builtinhelp.c +msgid " is of type %q\n" +msgstr " shì %q lèi xíng\n" + #: main.c msgid " output:\n" msgstr " shūchū:\n" @@ -121,7 +129,7 @@ msgstr "%q() cǎiyòng %d wèizhì cānshù, dàn gěi chū %d" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format msgid "%s error 0x%x" -msgstr "" +msgstr "%s cuò wù 0x%x" #: py/argcheck.c msgid "'%q' argument required" @@ -287,7 +295,7 @@ msgstr "bù zhīchí 3-arg pow ()" #: shared-module/msgpack/__init__.c msgid "64 bit types" -msgstr "" +msgstr "64 wèi lèi xíng" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c @@ -553,7 +561,7 @@ msgstr "CBC kuài bì xū shì 16 zì jié de bèi shù" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "CRC or checksum was invalid" -msgstr "" +msgstr "CRC huò jiào yàn hé wú xiào" #: py/objtype.c msgid "Call super().__init__() before accessing native object." @@ -561,15 +569,17 @@ msgstr "Zài fǎngwèn běn jī wùjiàn zhīqián diàoyòng super().__init__() #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on RTC IO from deep sleep." -msgstr "" +msgstr "zhǐ néng zài RTC Io shàng cóng shēn dù shuì mián zhōng bào jǐng." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on one low pin while others alarm high from deep sleep." msgstr "" +"Zhǐ néng zài yīgè dī diàn píng yǐn jiǎo shàng fāchū jǐngbào, ér qítā yǐn " +"jiǎo cóng shēndù shuìmián zhōng fāchū gāo diàn píng jǐngbào." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on two low pins from deep sleep." -msgstr "" +msgstr "zhǐ néng cóng shēn dù shuì mián zhōng bào jǐng liǎng gè dī yǐn jiǎo." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" @@ -605,7 +615,7 @@ msgstr "Wúfǎ shūchū tóng yīgè yǐn jiǎo shàng de liǎng gè píndào" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot pull on input-only pin." -msgstr "" +msgstr "wú fǎ lā dòng jǐn shū rù yǐn jiǎo." #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." @@ -652,7 +662,7 @@ msgstr "Wúfǎ gēnggǎi yǐ zài shǐyòng de jìshí qì shàng de pínlǜ" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot wake on pin edge. Only level." -msgstr "" +msgstr "wú fǎ zài yǐn jiǎo biān yuán huàn xǐng. jǐn jí bié." #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." @@ -859,6 +869,10 @@ msgstr "EXTINT píndào yǐjīng shǐyòng" msgid "Error in regex" msgstr "Zhèngzé biǎodá shì cuòwù" +#: shared-bindings/socketpool/Socket.c +msgid "Error: Failure to bind" +msgstr "cuò wù: bǎng dìng shī bài" + #: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c @@ -894,7 +908,7 @@ msgstr "Qídài yīgè dìzhǐ" #: shared-bindings/alarm/__init__.c msgid "Expected an alarm" -msgstr "" +msgstr "yù qī yǒu jǐng bào" #: shared-module/_pixelbuf/PixelBuf.c #, c-format @@ -911,7 +925,7 @@ msgstr "FFT jǐn wéi ndarrays dìng yì" #: extmod/ulab/code/fft/fft.c msgid "FFT is implemented for linear arrays only" -msgstr "" +msgstr "FFT jǐn shì yòng yú xiàn xìng zhèn liè" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" @@ -985,7 +999,7 @@ msgstr "guò lǜ qì tài fù zá" #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" -msgstr "" +msgstr "gù jiàn yìng xiàng wú xiào" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" @@ -1007,7 +1021,7 @@ msgstr "Hánshù xūyào suǒdìng" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Generic Failure" -msgstr "" +msgstr "tōng yòng gù zhàng" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c @@ -1047,7 +1061,7 @@ msgstr "I2SOut bù kě yòng" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "IOs 0, 2 & 4 do not support internal pullup in sleep" -msgstr "" +msgstr "IOS 0, 2 + 4 bù zhī chí shuì mián zhōng de nèi bù shàng lā" #: shared-bindings/aesio/aes.c #, c-format @@ -1135,7 +1149,7 @@ msgstr "Wúxiào de PWM pínlǜ" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "Invalid Pin" -msgstr "" +msgstr "wú xiào yǐn jiǎo" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c @@ -1249,11 +1263,19 @@ msgstr "Ānquán móshì wúxiào" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid size" -msgstr "" +msgstr "dà xiǎo wú xiào" + +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid socket for TLS" +msgstr "TLS de chā zuò wú xiào" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" -msgstr "" +msgstr "wú xiào zhuàng tài" + +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Invalid use of TLS Socket" +msgstr "TLS tào jiē zì de wú xiào shǐ yòng" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" @@ -1271,6 +1293,10 @@ msgstr "Wúxiào de làng làngcháo wénjiàn" msgid "Invalid word/bit length" msgstr "Wúxiào de zì/wèi chángdù" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Issue setting SO_REUSEADDR" +msgstr "wèn tí shè zhì SO_REUSEADDR" + #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "mì yào bì xū wéi 16, 24 huò 32 zì jié cháng" @@ -1297,7 +1323,7 @@ msgstr "Chángdù bìxū shìfēi fùshù" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "MAC address was invalid" -msgstr "" +msgstr "MAC dì zhǐ wú xiào" #: shared-module/bitbangio/SPI.c msgid "MISO pin init failed." @@ -1347,7 +1373,7 @@ msgstr "bì xū shǐ yòng 6 RGB yǐn jiǎo de bèi shù, ér bù shì %d" #: ports/esp32s2/common-hal/nvm/ByteArray.c msgid "NVS Error" -msgstr "" +msgstr "NVS cuò wù" #: py/parse.c msgid "Name too long" @@ -1370,7 +1396,7 @@ msgstr "Wèi zhǎodào DMA píndào" #: shared-module/adafruit_bus_device/I2CDevice.c #, c-format msgid "No I2C device at address: %x" -msgstr "" +msgstr "dì zhǐ wú I2C shè bèi: %x" #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/SPI.c @@ -1511,7 +1537,7 @@ msgstr "Jǐn zhīchí IPv4 dìzhǐ" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Only IPv4 sockets supported" -msgstr "" +msgstr "jǐn zhī chí IPv4 tào jiē zì" #: shared-module/displayio/OnDiskBitmap.c #, c-format @@ -1532,11 +1558,11 @@ msgstr "" #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c msgid "Only one TouchAlarm can be set in deep sleep." -msgstr "" +msgstr "zhǐ yǒu yí gè chù mō bì kě yǐ shè zhì zài shēn dù shuì mián." #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c msgid "Only one alarm.time alarm can be set." -msgstr "" +msgstr "zhǐ néng shè zhì yí gè bào jǐng." #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" @@ -1548,17 +1574,17 @@ msgstr "Ip jǐn zhīchí raw int" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Operation or feature not supported" -msgstr "" +msgstr "bù zhī chí cāo zuò huò gōng néng" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Operation timed out" -msgstr "" +msgstr "cāo zuò yǐ fēn shí" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Out of memory" -msgstr "" +msgstr "nèi cún bù zú" -#: ports/esp32s2/common-hal/socketpool/SocketPool.c +#: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Out of sockets" msgstr "tào jiē zì wài" @@ -1568,7 +1594,7 @@ msgstr "Guò cǎiyàng bìxū shì 8 de bèishù." #: shared-bindings/audiobusio/PDMIn.c msgid "PDMIn not available" -msgstr "" +msgstr "PDMIn bù kě yòng" #: shared-bindings/pwmio/PWMOut.c msgid "" @@ -1589,7 +1615,7 @@ msgstr "Shàng bù zhīchí ParallelBus" #: ports/esp32s2/common-hal/audiobusio/__init__.c msgid "Peripheral in use" -msgstr "" +msgstr "shǐ yòng zhōng de wài shè" #: py/moduerrno.c msgid "Permission denied" @@ -1658,11 +1684,13 @@ msgstr "Qiánzhuì huǎnchōng qū bìxū zài duī shàng" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n" -msgstr "" +msgstr "àn rèn hé jiàn jìn rù REPL. shǐ yòng CTRL-D zhòng xīn jiā zǎi .\n" #: main.c msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +"jiǎ zhuāng shēn dù shuì mián , zhí dào bào jǐng , CTRL-C huò wén jiàn xiě " +"rù .\n" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." @@ -1714,7 +1742,7 @@ msgstr "Zhǐ dú duìxiàng" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Received response was invalid" -msgstr "" +msgstr "shōu dào de xiǎng yìng wú xiào" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" @@ -1730,7 +1758,7 @@ msgstr "Qǐngqiú de AES móshì bù shòu zhīchí" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Requested resource not found" -msgstr "" +msgstr "wèi zhǎo dào qǐng qiú de zī yuán" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" @@ -1842,7 +1870,7 @@ msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo" #: shared-bindings/alarm/time/TimeAlarm.c msgid "Supply one of monotonic_time or epoch_time" -msgstr "" +msgstr "tí gòng qí zhōng yī monotonic_time huò epoch_time" #: shared-bindings/gnss/GNSS.c msgid "System entry must be gnss.SatelliteSystem" @@ -1916,7 +1944,7 @@ msgstr "Píng pū kuāndù bìxū huàfēn wèi tú kuāndù" #: shared-bindings/alarm/time/TimeAlarm.c msgid "Time is in the past." -msgstr "" +msgstr "shí jiān yǐ jīng guò qù." #: ports/nrf/common-hal/_bleio/Adapter.c #, c-format @@ -2031,7 +2059,7 @@ msgstr "Wúfǎ xiě rù nvm." #: shared-bindings/alarm/SleepMemory.c msgid "Unable to write to sleep_memory." -msgstr "" +msgstr "wú fǎ xiě rù sleep_memory。" #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" @@ -2043,8 +2071,9 @@ msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Wèi chǔlǐ de ESP TLS cuòwù %d %d %x %d" #: shared-bindings/wifi/Radio.c -msgid "Unknown failure" -msgstr "Wèizhī gùzhàng" +#, c-format +msgid "Unknown failure %d" +msgstr "wèi zhī gù zhàng %d" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -2101,7 +2130,7 @@ msgstr "Bù zhīchí de lādòng zhí." #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Update Failed" -msgstr "" +msgstr "gēng xīn shī bài" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c @@ -2115,7 +2144,7 @@ msgstr "Zhí chángdù > zuìdà chángdù" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Version was invalid" -msgstr "" +msgstr "bǎn běn wú xiào" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" @@ -2172,7 +2201,7 @@ msgstr "WiFi mìmǎ bìxū jiè yú 8 dào 63 gè zìfú zhī jiān" #: main.c msgid "Woken up by alarm.\n" -msgstr "" +msgstr "bèi jǐng bào chǎo xǐng.\n" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" @@ -2229,7 +2258,7 @@ msgstr "argsort cānshù bìxū shì ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "argsort is not implemented for flattened arrays" -msgstr "" +msgstr "wèi wéi pīn hé shù zǔ shí xiàn argsort" #: py/runtime.c msgid "argument has wrong type" @@ -2254,7 +2283,7 @@ msgstr "cānshù bìxū shì ndarrays" #: extmod/ulab/code/ndarray.c msgid "array and index length must be equal" -msgstr "" +msgstr "shù zǔ hé suǒ yǐn cháng dù bì xū xiāng děng" #: py/objarray.c shared-bindings/alarm/SleepMemory.c #: shared-bindings/nvm/ByteArray.c @@ -2263,7 +2292,7 @@ msgstr "yòu cè xūyào shùzǔ/zì jié" #: extmod/ulab/code/numerical/numerical.c msgid "attempt to get (arg)min/(arg)max of empty sequence" -msgstr "" +msgstr "cháng shì huò qǔ (arg) zuì xiǎo zhí /(arg) zuì dà kōng xù liè" #: extmod/ulab/code/numerical/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" @@ -2275,15 +2304,15 @@ msgstr "shǔxìng shàngwèi zhīchí" #: extmod/ulab/code/numerical/numerical.c msgid "axis is out of bounds" -msgstr "" +msgstr "zhóu chāo chū biān jiè" #: extmod/ulab/code/numerical/numerical.c msgid "axis must be None, or an integer" -msgstr "" +msgstr "zhóu bì xū wéi \" wú \" huò zhěng shù" #: extmod/ulab/code/numerical/numerical.c msgid "axis too long" -msgstr "" +msgstr "zhóu tài cháng" #: py/builtinevex.c msgid "bad compile mode" @@ -2317,10 +2346,18 @@ msgstr "měi jiàn yàngběn bìxū wèi 8 huò 16" msgid "branch not in range" msgstr "fēnzhī bùzài fànwéi nèi" +#: extmod/ulab/code/ulab_create.c +msgid "buffer is smaller than requested size" +msgstr "huǎn chōng qū xiǎo yú qǐng qiú de dà xiǎo" + #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "huǎnchōng qū bìxū shì zì jié lèi duìxiàng" +#: extmod/ulab/code/ulab_create.c +msgid "buffer size must be a multiple of element size" +msgstr "huǎn chōng qū dà xiǎo bì xū shì yuán sù dà xiǎo de bèi shù" + #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "huǎnchōng qū dàxiǎo bìxū pǐpèi géshì" @@ -2488,7 +2525,7 @@ msgstr "wúfǎ cóng shǒudòng zìduàn guīgé qiēhuàn dào zìdòng zìduà #: extmod/ulab/code/ndarray_operators.c msgid "cannot cast output with casting rule" -msgstr "" +msgstr "wú fǎ shǐ yòng qiáng zhì zhuǎn huàn guī zé qiáng zhì zhuǎn huàn shū chū" #: py/objtype.c msgid "cannot create '%q' instances" @@ -2528,7 +2565,7 @@ msgstr "quānzi zhǐ néng zài yī wèi jiāzhǎng zhōng zhùcè" #: shared-bindings/msgpack/ExtType.c msgid "code outside range 0~127" -msgstr "" +msgstr "dài mǎ chāo chū fàn wéi 0~127" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" @@ -2595,7 +2632,7 @@ msgstr "wúfǎ quèdìng SD kǎ bǎnběn" #: extmod/ulab/code/numerical/numerical.c msgid "cross is defined for 1D arrays of length 3" -msgstr "" +msgstr "duì yú cháng dù wéi 3 de 1D shù zǔ dìng yì cross" #: extmod/ulab/code/approx/approx.c msgid "data must be iterable" @@ -2607,7 +2644,7 @@ msgstr "shùjù chángdù bìxū xiāngděng" #: extmod/ulab/code/ndarray.c msgid "data type not understood" -msgstr "" +msgstr "wèi lǐ jiě de shù jù lèi xíng" #: py/parsenum.c msgid "decimal numbers not supported" @@ -2619,7 +2656,7 @@ msgstr "mòrèn 'except' bìxū shì zuìhòu yīgè" #: shared-bindings/msgpack/__init__.c msgid "default is not a function" -msgstr "" +msgstr "mò rèn zhí bú shì hán shù" #: shared-bindings/audiobusio/PDMIn.c msgid "" @@ -2646,7 +2683,7 @@ msgstr "bùtóng de cānshù bìxū shì ndarray" #: extmod/ulab/code/numerical/numerical.c msgid "differentiation order out of range" -msgstr "" +msgstr "chā yì shùn xù fàn wéi" #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c @@ -2679,7 +2716,7 @@ msgstr "jiéwěi_x yīnggāi shì yīgè zhěngshù" #: shared-bindings/alarm/time/TimeAlarm.c msgid "epoch_time not supported on this board" -msgstr "" +msgstr "epoch_time bǎn bù zhī chí cǐ bǎn běn" #: ports/nrf/common-hal/busio/UART.c #, c-format @@ -2724,7 +2761,7 @@ msgstr "qídài guānjiàn: Zìdiǎn de jiàzhí" #: shared-bindings/msgpack/__init__.c msgid "ext_hook is not a function" -msgstr "" +msgstr "ext_hook bú shì hán shù" #: py/argcheck.c msgid "extra keyword arguments given" @@ -2773,7 +2810,7 @@ msgstr "dì yīgè cānshù bìxū shì yī gè hánshù" #: extmod/ulab/code/ulab_create.c msgid "first argument must be a tuple of ndarrays" -msgstr "" +msgstr "dì yī gè cān shù bì xū shì yí gè yuán zǔ ndarrays" #: extmod/ulab/code/ndarray.c msgid "first argument must be an iterable" @@ -2830,7 +2867,7 @@ msgstr "hánshù zài jiàngé mòwěi jùyǒu xiāngtóng de fúhào" #: extmod/ulab/code/ndarray.c msgid "function is defined for ndarrays only" -msgstr "" +msgstr "hán shù jǐn wéi ndarrays dìng yì" #: py/argcheck.c #, c-format @@ -2926,11 +2963,11 @@ msgstr "nèi lián jíhé bìxū shì yīgè hánshù" #: extmod/ulab/code/ndarray.c msgid "input and output shapes are not compatible" -msgstr "" +msgstr "shū rù hé shū chū xíng zhuàng bù jiān róng" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" -msgstr "" +msgstr "shū rù cān shù bì xū shì zhěng shù, yuán zǔ huò liè biǎo" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" @@ -2938,7 +2975,7 @@ msgstr "shūrù shùzǔ de chángdù bìxū shì 2 de mì" #: extmod/ulab/code/ulab_create.c msgid "input arrays are not compatible" -msgstr "" +msgstr "shū rù shù zǔ bù jiān róng" #: extmod/ulab/code/poly/poly.c msgid "input data must be an iterable" @@ -2954,19 +2991,19 @@ msgstr "shūrù jǔzhèn shì qíyì de" #: extmod/ulab/code/user/user.c msgid "input must be a dense ndarray" -msgstr "" +msgstr "shū rù bì xū shì mì jí de ndarray" #: extmod/ulab/code/ulab_create.c msgid "input must be a tensor of rank 2" -msgstr "" +msgstr "shū rù bì xū shì děng jí 2 de zhāng liàng" #: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c msgid "input must be an ndarray" -msgstr "" +msgstr "shū rù bì xū shì ndarray" #: extmod/ulab/code/filter/filter.c msgid "input must be one-dimensional" -msgstr "" +msgstr "shū rù bì xū shì yì wéi de" #: extmod/ulab/code/linalg/linalg.c msgid "input must be square matrix" @@ -2982,7 +3019,7 @@ msgstr "shūrù xiàngliàng de chángdù bìxū xiāngděng" #: extmod/ulab/code/poly/poly.c msgid "inputs are not iterable" -msgstr "" +msgstr "shū rù bù kě yí dòng" #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" @@ -3056,7 +3093,7 @@ msgstr "wúxiào de hàomǎ yǔfǎ" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "io must be rtc io" -msgstr "" +msgstr "IO bì xū shì RTC IO" #: py/objtype.c msgid "issubclass() arg 1 must be a class" @@ -3155,11 +3192,11 @@ msgstr "Dāng gùdìng chángdù wèi %s shí, zuìdà chángdù bìxū wèi 0-% #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "max_length must be >= 0" -msgstr "" +msgstr "zuì dà cháng dù bì xū >= 0" #: extmod/ulab/code/ndarray.c msgid "maximum number of dimensions is 4" -msgstr "" +msgstr "zuì dà chǐ cùn shù wéi 4" #: py/runtime.c msgid "maximum recursion depth exceeded" @@ -3175,7 +3212,7 @@ msgstr "maxiter yìng wéi > 0" #: extmod/ulab/code/numerical/numerical.c msgid "median argument must be an ndarray" -msgstr "" +msgstr "zhōng wèi shù cān shù bì xū shì ndarray" #: py/runtime.c #, c-format @@ -3261,7 +3298,7 @@ msgstr "zhǎo bù dào fēi běndì de bǎng dìng" #: shared-module/msgpack/__init__.c msgid "no default packer" -msgstr "" +msgstr "wú mò rèn bāo zhuāng jī" #: py/builtinimport.c msgid "no module named '%q'" @@ -3302,15 +3339,15 @@ msgstr "guānjiàn zì cānshù zhīhòu de fēi guānjiàn zì cānshù" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "non-zero timeout must be > 0.01" -msgstr "" +msgstr "fēi líng chāo shí bì xū > 0.01" #: shared-bindings/_bleio/Adapter.c msgid "non-zero timeout must be >= interval" -msgstr "" +msgstr "fēi líng chāo shí bì xū wéi >= jiàn gé" #: extmod/ulab/code/linalg/linalg.c msgid "norm is defined for 1D and 2D arrays" -msgstr "" +msgstr "wéi 1D hé 2D shù zǔ dìng yì guī fàn" #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" @@ -3328,6 +3365,10 @@ msgstr "géshì zìfú chuàn cān shǔ bùzú" msgid "number of points must be at least 2" msgstr "diǎnshù bìxū zhìshǎo wèi 2" +#: py/builtinhelp.c +msgid "object " +msgstr "duì xiàng " + #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "duìxiàng '%q' bùshì yuán zǔ huò lièbiǎo" @@ -3378,11 +3419,15 @@ msgstr "jīshù zìfú chuàn" #: extmod/ulab/code/ulab_create.c msgid "offset is too large" -msgstr "" +msgstr "piān yí tài dà" #: shared-bindings/dualbank/__init__.c msgid "offset must be >= 0" -msgstr "" +msgstr "piān yí liàng bì xū >= 0" + +#: extmod/ulab/code/ulab_create.c +msgid "offset must be non-negative and no greater than buffer length" +msgstr "piān yí liàng bì xū wéi fēi fù shù qiě bù dà yú huǎn chōng qū cháng dù" #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" @@ -3408,7 +3453,7 @@ msgstr "cāozuò shǔ bùnéng yīqǐ guǎngbò" #: extmod/ulab/code/ndarray.c msgid "operation is implemented for 1D Boolean arrays only" -msgstr "" +msgstr "jǐn duì 1D bù ěr shù zǔ shí xiàn cāo zuò" #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" @@ -3548,7 +3593,7 @@ msgstr "qǐngqiú chángdù %d dàn duìxiàng chángdù %d" #: extmod/ulab/code/ndarray_operators.c msgid "results cannot be cast to specified type" -msgstr "" +msgstr "wú fǎ jiāng jié guǒ qiáng zhì zhuǎn huàn dào zhǐ dìng lèi xíng" #: py/compile.c msgid "return annotation must be an identifier" @@ -3570,7 +3615,7 @@ msgstr "rgb_pins[%d] yǔ shízhōng bùzài tóng yīgè duānkǒu shàng" #: extmod/ulab/code/numerical/numerical.c msgid "roll argument must be an ndarray" -msgstr "" +msgstr "gǔn dòng cān shù bì xū shì ndarray" #: py/objstr.c msgid "rsplit(None,n)" @@ -3598,11 +3643,11 @@ msgstr "bù zhīchí jiǎoběn biānyì" #: extmod/ulab/code/ndarray.c msgid "shape must be a tuple" -msgstr "" +msgstr "xíng zhuàng bì xū shì yí gè yuán zǔ" #: shared-module/msgpack/__init__.c msgid "short read" -msgstr "" +msgstr "duǎn dú" #: py/objstr.c msgid "sign not allowed in string format specifier" @@ -3735,7 +3780,7 @@ msgstr "Chāo shí shíjiān bìxū wèi 0.0 Dào 100.0 Miǎo" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "timeout must be < 655.35 secs" -msgstr "" +msgstr "chāo shí bì xū < 655.35 miǎo" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "timeout must be >= 0.0" @@ -3755,7 +3800,7 @@ msgstr "time_t shíjiān chuō chāochū píngtái fànwéi" #: extmod/ulab/code/ndarray.c msgid "tobytes can be invoked for dense arrays only" -msgstr "" +msgstr "tobytes zhǐ néng duì mì jí shù zǔ diào yòng" #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" @@ -3763,7 +3808,7 @@ msgstr "tígōng jǐ dìng géshì de cānshù tài duō" #: extmod/ulab/code/ulab_create.c msgid "too many dimensions" -msgstr "" +msgstr "chǐ cùn tài duō" #: extmod/ulab/code/ndarray.c msgid "too many indices" @@ -3776,7 +3821,7 @@ msgstr "dǎkāi tài duō zhí (yùqí %d)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays" -msgstr "" +msgstr "wéi 1D shù zǔ dìng yì xiàn jǐng" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" @@ -3784,7 +3829,7 @@ msgstr "Trapz shì wèi děng zhǎng de 1D shùzǔ dìngyì de" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "trigger level must be 0 or 1" -msgstr "" +msgstr "chù fā jí bié bì xū wéi 0 huò 1" #: py/obj.c msgid "tuple/list has wrong length" @@ -3926,7 +3971,7 @@ msgstr "xiàngliàng bìxū jùyǒu xiāngtóng de chángdù" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "wakeup conflict" -msgstr "" +msgstr "huàn xǐng chōng tū" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" @@ -3940,17 +3985,21 @@ msgstr "kān mén gǒu chāoshí bìxū dàyú 0" msgid "width must be greater than zero" msgstr "kuāndù bìxū dàyú líng" +#: ports/esp32s2/common-hal/wifi/Radio.c +msgid "wifi is not enabled" +msgstr "wèi qǐ yòng WIFI" + #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "Chuāngkǒu bìxū shì <= jiàngé" #: extmod/ulab/code/numerical/numerical.c msgid "wrong axis index" -msgstr "" +msgstr "cuò wù de zhóu suǒ yǐn" #: extmod/ulab/code/ulab_create.c msgid "wrong axis specified" -msgstr "" +msgstr "zhǐ dìng de zhóu cuò wù" #: extmod/ulab/code/vector/vectorise.c msgid "wrong input type" @@ -3978,7 +4027,7 @@ msgstr "x zhí chāochū biānjiè" #: ports/esp32s2/common-hal/audiobusio/__init__.c msgid "xTaskCreate failed" -msgstr "" +msgstr "xTaskCreate shī bài" #: shared-bindings/displayio/Shape.c msgid "y should be an int" @@ -4004,6 +4053,9 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "Unknown failure" +#~ msgstr "Wèizhī gùzhàng" + #~ msgid "input argument must be an integer or a 2-tuple" #~ msgstr "shūrù cānshù bìxū shì zhěngshù huò 2 yuán zǔ" diff --git a/main.c b/main.c index 91b6a062d2..d9cdcca1da 100755 --- a/main.c +++ b/main.c @@ -317,7 +317,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode) { // Program has finished running. - bool serial_connected_before_animation = serial_connected(); + bool printed_press_any_key = false; #if CIRCUITPY_DISPLAYIO bool refreshed_epaper_display = false; #endif @@ -364,7 +364,7 @@ STATIC bool run_code_py(safe_mode_t safe_mode) { } #endif - if (!serial_connected_before_animation && serial_connected()) { + if (!printed_press_any_key && serial_connected()) { if (!serial_connected_at_start) { print_code_py_status_message(safe_mode); } @@ -372,11 +372,12 @@ STATIC bool run_code_py(safe_mode_t safe_mode) { print_safe_mode_message(safe_mode); serial_write("\n"); serial_write_compressed(translate("Press any key to enter the REPL. Use CTRL-D to reload.\n")); + printed_press_any_key = true; } - if (serial_connected_before_animation && !serial_connected()) { + if (!serial_connected()) { serial_connected_at_start = false; + printed_press_any_key = false; } - serial_connected_before_animation = serial_connected(); // Refresh the ePaper display if we have one. That way it'll show an error message. #if CIRCUITPY_DISPLAYIO diff --git a/ports/atmel-samd/boards/8086_commander/mpconfigboard.mk b/ports/atmel-samd/boards/8086_commander/mpconfigboard.mk index b5a4bc735f..f976dfe787 100644 --- a/ports/atmel-samd/boards/8086_commander/mpconfigboard.mk +++ b/ports/atmel-samd/boards/8086_commander/mpconfigboard.mk @@ -22,7 +22,6 @@ CIRCUITPY_GAMEPAD = 1 CIRCUITPY_BUSDEVICE = 1 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HID FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD #FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_ADXL34x diff --git a/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk b/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk index d31d1f54a4..36d463697d 100644 --- a/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk +++ b/ports/atmel-samd/boards/arduino_mkr1300/mpconfigboard.mk @@ -10,3 +10,4 @@ INTERNAL_FLASH_FILESYSTEM = 1 LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 diff --git a/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk b/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk index 7eb83a1230..20307fc051 100644 --- a/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk +++ b/ports/atmel-samd/boards/arduino_mkrzero/mpconfigboard.mk @@ -11,3 +11,5 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 +CFLAGS_INLINE_LIMIT = 40 diff --git a/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk b/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk index 178258b6cd..2ace30fb53 100755 --- a/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk @@ -16,6 +16,7 @@ CIRCUITPY_COUNTIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_VECTORIO = 0 +CIRCUITPY_BUSDEVICE = 0 MICROPY_PY_ASYNC_AWAIT = 0 SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk index 505f5c145d..0b150a5fbe 100644 --- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk @@ -22,7 +22,6 @@ SUPEROPT_GC = 0 CFLAGS_INLINE_LIMIT = 55 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_HID FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH diff --git a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk index c3be33134c..ae0b6837c0 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.mk @@ -22,11 +22,10 @@ CIRCUITPY_ROTARYIO = 0 CIRCUITPY_RTC = 0 SUPEROPT_GC = 0 -CFLAGS_INLINE_LIMIT = 50 +CFLAGS_INLINE_LIMIT = 40 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Crickit FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH diff --git a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h index 4b0c324faa..1586a32890 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h @@ -43,5 +43,3 @@ // USB is always used internally so skip the pin objects for it. #define IGNORE_PIN_PA24 1 #define IGNORE_PIN_PA25 1 - -#define MICROPY_PY_URE 0 diff --git a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk index 51e9b05af2..aace5c0cb5 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.mk @@ -18,6 +18,7 @@ CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_MSGPACK = 0 CIRCUITPY_PIXELBUF = 0 +CIRCUITPY_RE = 0 CIRCUITPY_ROTARYIO = 0 CIRCUITPY_RTC = 0 # So not all of displayio, sorry! @@ -27,7 +28,6 @@ SUPEROPT_GC = 0 CFLAGS_INLINE_LIMIT = 55 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_CircuitPlayground FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel diff --git a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk index 143910318d..ab6c4ed99d 100644 --- a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk @@ -11,3 +11,4 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 diff --git a/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk index f06163b84a..309563ff49 100644 --- a/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk @@ -21,7 +21,6 @@ CFLAGS_INLINE_LIMIT = 50 CIRCUITPY_MSGPACK = 0 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Crickit FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Motor FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel diff --git a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk index 6e089bb90d..6ea21ed82e 100644 --- a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk @@ -28,5 +28,4 @@ CFLAGS_INLINE_LIMIT = 35 SUPEROPT_GC = 0 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM69 diff --git a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk index 383b6a6df4..76a6be2e34 100644 --- a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk @@ -29,5 +29,4 @@ CFLAGS_INLINE_LIMIT = 35 SUPEROPT_GC = 0 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM9x diff --git a/ports/atmel-samd/boards/gemma_m0/mpconfigboard.mk b/ports/atmel-samd/boards/gemma_m0/mpconfigboard.mk index 0345417a98..e1c0f4b9a7 100644 --- a/ports/atmel-samd/boards/gemma_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/gemma_m0/mpconfigboard.mk @@ -20,4 +20,5 @@ endif ifeq ($(TRANSLATION), de_DE) RELEASE_NEEDS_CLEAN_BUILD = 1 CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 endif diff --git a/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.mk b/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.mk index 1931ceb9a8..2b211abd4e 100644 --- a/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.mk +++ b/ports/atmel-samd/boards/hallowing_m0_express/mpconfigboard.mk @@ -27,7 +27,6 @@ CFLAGS_INLINE_LIMIT = 55 SUPEROPT_GC = 0 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_LIS3DH FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel diff --git a/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h b/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h index 98920b54f2..7926967635 100644 --- a/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/itsybitsy_m4_express/mpconfigboard.h @@ -12,7 +12,7 @@ // These are pins not to reset. // QSPI Data pins #define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) -// DotStar pins, QSPI CS, and QSPI SCK +// DotStar SCK, DotStar MOSI, QSPI SCK, and QSPI CS #define MICROPY_PORT_B (PORT_PB02 | PORT_PB03 | PORT_PB10 | PORT_PB11) #define MICROPY_PORT_C (0) #define MICROPY_PORT_D (0) diff --git a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk index 4895cda77b..58d4e49805 100644 --- a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk +++ b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk @@ -10,3 +10,5 @@ QSPI_FLASH_FILESYSTEM = 1 EXTERNAL_FLASH_DEVICE_COUNT = 3 EXTERNAL_FLASH_DEVICES = "S25FL116K, S25FL216K, GD25Q16C" LONGINT_IMPL = MPZ + +CIRCUITPY__EVE = 1 diff --git a/ports/atmel-samd/boards/pycubed/mpconfigboard.mk b/ports/atmel-samd/boards/pycubed/mpconfigboard.mk index b7b8073ab9..a82362b8d2 100644 --- a/ports/atmel-samd/boards/pycubed/mpconfigboard.mk +++ b/ports/atmel-samd/boards/pycubed/mpconfigboard.mk @@ -21,7 +21,6 @@ CIRCUITPY_GAMEPAD = 0 CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_PS2IO = 0 -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD diff --git a/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk b/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk index f49bb3fef0..3bf42d7054 100644 --- a/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk +++ b/ports/atmel-samd/boards/pycubed_mram/mpconfigboard.mk @@ -21,7 +21,6 @@ CIRCUITPY_GAMEPAD = 0 CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_PS2IO = 0 -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD diff --git a/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk index 964cbe643a..e100e2da62 100644 --- a/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk @@ -11,14 +11,6 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 CFLAGS_BOARD = --param max-inline-insns-auto=15 -ifeq ($(TRANSLATION), zh_Latn_pinyin) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 -endif -ifeq ($(TRANSLATION), de_DE) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 -SUPEROPT_VM = 0 -endif diff --git a/ports/atmel-samd/boards/sam32/mpconfigboard.mk b/ports/atmel-samd/boards/sam32/mpconfigboard.mk index 1dc686ef8a..9ac24a014c 100644 --- a/ports/atmel-samd/boards/sam32/mpconfigboard.mk +++ b/ports/atmel-samd/boards/sam32/mpconfigboard.mk @@ -13,5 +13,4 @@ LONGINT_IMPL = MPZ CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_USTACK = 1 -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel diff --git a/ports/atmel-samd/boards/serpente/mpconfigboard.mk b/ports/atmel-samd/boards/serpente/mpconfigboard.mk index 6e953adf72..09036875f1 100644 --- a/ports/atmel-samd/boards/serpente/mpconfigboard.mk +++ b/ports/atmel-samd/boards/serpente/mpconfigboard.mk @@ -14,6 +14,7 @@ LONGINT_IMPL = NONE CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_GAMEPAD = 0 +CIRCUITPY_BUSDEVICE = 0 SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk index e71bb07395..2e15bc042a 100755 --- a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk +++ b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.mk @@ -14,6 +14,7 @@ LONGINT_IMPL = MPZ CIRCUITPY_AUDIOIO = 0 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_VECTORIO = 0 +CIRCUITPY_BUSDEVICE = 0 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_DotStar diff --git a/ports/atmel-samd/boards/sparkfun_samd21_dev/mpconfigboard.mk b/ports/atmel-samd/boards/sparkfun_samd21_dev/mpconfigboard.mk index a2bd577cd3..3104be0a0f 100644 --- a/ports/atmel-samd/boards/sparkfun_samd21_dev/mpconfigboard.mk +++ b/ports/atmel-samd/boards/sparkfun_samd21_dev/mpconfigboard.mk @@ -10,4 +10,10 @@ INTERNAL_FLASH_FILESYSTEM = 1 LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 +ifeq ($(TRANSLATION),de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif + SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/ugame10/mpconfigboard.mk b/ports/atmel-samd/boards/ugame10/mpconfigboard.mk index b1242d206e..640d421e81 100644 --- a/ports/atmel-samd/boards/ugame10/mpconfigboard.mk +++ b/ports/atmel-samd/boards/ugame10/mpconfigboard.mk @@ -28,6 +28,7 @@ CIRCUITPY_RTC = 0 CIRCUITPY_TOUCHIO = 0 CIRCUITPY_USB_HID = 0 CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_BUSDEVICE = 0 FROZEN_MPY_DIRS += $(TOP)/frozen/circuitpython-stage/ugame10 diff --git a/ports/atmel-samd/boards/xinabox_cc03/mpconfigboard.mk b/ports/atmel-samd/boards/xinabox_cc03/mpconfigboard.mk index 3562228c71..d6f333b5be 100644 --- a/ports/atmel-samd/boards/xinabox_cc03/mpconfigboard.mk +++ b/ports/atmel-samd/boards/xinabox_cc03/mpconfigboard.mk @@ -24,4 +24,3 @@ CIRCUITPY_TOUCHIO=0 CIRCUITPY_BUSDEVICE=1 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice diff --git a/ports/atmel-samd/boards/xinabox_cs11/mpconfigboard.mk b/ports/atmel-samd/boards/xinabox_cs11/mpconfigboard.mk index 53908293f5..fd2fa044a8 100644 --- a/ports/atmel-samd/boards/xinabox_cs11/mpconfigboard.mk +++ b/ports/atmel-samd/boards/xinabox_cs11/mpconfigboard.mk @@ -27,5 +27,4 @@ CIRCUITPY_COUNTIO=0 CIRCUITPY_BUSDEVICE=1 # Include these Python libraries in firmware. -FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_BusDevice FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD diff --git a/ports/atmel-samd/mpconfigport.h b/ports/atmel-samd/mpconfigport.h index bce89e0b99..d2a529485e 100644 --- a/ports/atmel-samd/mpconfigport.h +++ b/ports/atmel-samd/mpconfigport.h @@ -45,11 +45,7 @@ #define MICROPY_PY_BUILTINS_COMPLEX (0) #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0) #define MICROPY_PY_FUNCTION_ATTRS (0) -// MICROPY_PY_UJSON depends on MICROPY_PY_IO -#define MICROPY_PY_IO (0) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (0) -#define MICROPY_PY_UBINASCII (0) -#define MICROPY_PY_UJSON (0) #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (0) #define MICROPY_PY_UERRNO_LIST \ X(EPERM) \ @@ -84,9 +80,6 @@ #define SPI_FLASH_MAX_BAUDRATE 24000000 #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (1) #define MICROPY_PY_FUNCTION_ATTRS (1) -// MICROPY_PY_UJSON depends on MICROPY_PY_IO -#define MICROPY_PY_IO (1) -#define MICROPY_PY_UJSON (1) // MICROPY_PY_UERRNO_LIST - Use the default #endif // SAM_D5X_E5X diff --git a/ports/atmel-samd/mpconfigport.mk b/ports/atmel-samd/mpconfigport.mk index 17e3995bf5..fb9cdf2e66 100644 --- a/ports/atmel-samd/mpconfigport.mk +++ b/ports/atmel-samd/mpconfigport.mk @@ -20,26 +20,16 @@ endif # Put samd21-only choices here. ifeq ($(CHIP_FAMILY),samd21) -# frequencyio not yet verified as working on SAMD21, though make it possible to override. -ifndef CIRCUITPY_AUDIOMIXER -CIRCUITPY_AUDIOMIXER = 0 -endif -ifndef CIRCUITPY_AUDIOMP3 -CIRCUITPY_AUDIOMP3 = 0 -endif +# The ?='s allow overriding in mpconfigboard.mk. -ifndef CIRCUITPY_BUILTINS_POW3 -CIRCUITPY_BUILTINS_POW3 = 0 -endif - -ifndef CIRCUITPY_FREQUENCYIO -CIRCUITPY_FREQUENCYIO = 0 -endif - -ifndef CIRCUITPY_TOUCHIO_USE_NATIVE -CIRCUITPY_TOUCHIO_USE_NATIVE = 1 -endif +CIRCUITPY_AUDIOMIXER ?= 0 +CIRCUITPY_BINASCII ?= 0 +CIRCUITPY_AUDIOMP3 ?= 0 +CIRCUITPY_BUILTINS_POW3 ?= 0 +CIRCUITPY_FREQUENCYIO ?= 0 +CIRCUITPY_JSON ?= 0 +CIRCUITPY_TOUCHIO_USE_NATIVE ?= 1 # No room for HCI _bleio on SAMD21. CIRCUITPY_BLEIO_HCI = 0 @@ -71,27 +61,13 @@ ifeq ($(CHIP_FAMILY),samd51) # No native touchio on SAMD51. CIRCUITPY_TOUCHIO_USE_NATIVE = 0 -# The ifndef's allow overriding in mpconfigboard.mk. +# The ?='s allow overriding in mpconfigboard.mk. -ifndef CIRCUITPY_NETWORK -CIRCUITPY_NETWORK = 0 -endif - -ifndef CIRCUITPY_PS2IO -CIRCUITPY_PS2IO = 1 -endif - -ifndef CIRCUITPY_SAMD -CIRCUITPY_SAMD = 1 -endif - -ifndef CIRCUITPY_RGBMATRIX -CIRCUITPY_RGBMATRIX = $(CIRCUITPY_FULL_BUILD) -endif - -ifndef CIRCUITPY_FRAMEBUFFERIO -CIRCUITPY_FRAMEBUFFERIO = $(CIRCUITPY_FULL_BUILD) -endif +CIRCUITPY_NETWORK ?= 0 +CIRCUITPY_PS2IO ?= 1 +CIRCUITPY_SAMD ?= 1 +CIRCUITPY_RGBMATRIX ?= $(CIRCUITPY_FULL_BUILD) +CIRCUITPY_FRAMEBUFFERIO ?= $(CIRCUITPY_FULL_BUILD) endif # samd51 diff --git a/ports/cxd56/README.md b/ports/cxd56/README.md index 7fa439aacb..c399b8a4d7 100644 --- a/ports/cxd56/README.md +++ b/ports/cxd56/README.md @@ -75,7 +75,7 @@ Bootloader information: * You have to accept the End User License Agreement to be able to download and use the Spresense bootloader binary. -Download the spresense binaries zip archive from: [Spresense firmware v2-0-000](https://developer.sony.com/file/download/download-spresense-firmware-v2-0-000) +Download the spresense binaries zip archive from: [Spresense firmware v2-0-002](https://developer.sony.com/file/download/download-spresense-firmware-v2-0-002) Extract spresense binaries in your PC to ports/spresense/spresense-exported-sdk/firmware/ diff --git a/ports/cxd56/configs/circuitpython/defconfig b/ports/cxd56/configs/circuitpython/defconfig index a97f821dfa..096b53b800 100644 --- a/ports/cxd56/configs/circuitpython/defconfig +++ b/ports/cxd56/configs/circuitpython/defconfig @@ -165,6 +165,7 @@ CONFIG_USBDEV=y CONFIG_USBDEV_DMA=y CONFIG_USBDEV_DUALSPEED=y CONFIG_USEC_PER_TICK=1000 +CONFIG_USERMAIN_STACKSIZE=8192 CONFIG_USER_ENTRYPOINT="spresense_main" CONFIG_VIDEO_ISX012=y CONFIG_VIDEO_STREAM=y diff --git a/ports/cxd56/spresense-exported-sdk b/ports/cxd56/spresense-exported-sdk index 752c4cd56d..2ec2a15383 160000 --- a/ports/cxd56/spresense-exported-sdk +++ b/ports/cxd56/spresense-exported-sdk @@ -1 +1 @@ -Subproject commit 752c4cd56dd0a270a559c28272ceb61ddcb7806c +Subproject commit 2ec2a1538362696118dc3fdf56f33dacaf8f4067 diff --git a/ports/cxd56/supervisor/internal_flash.c b/ports/cxd56/supervisor/internal_flash.c index 2726fa4a23..9c103fb19e 100644 --- a/ports/cxd56/supervisor/internal_flash.c +++ b/ports/cxd56/supervisor/internal_flash.c @@ -30,10 +30,10 @@ /* Prototypes for Remote API */ -int FM_RawWrite(uint32_t offset, const void *buf, uint32_t size); -int FM_RawVerifyWrite(uint32_t offset, const void *buf, uint32_t size); -int FM_RawRead(uint32_t offset, void *buf, uint32_t size); -int FM_RawEraseSector(uint32_t sector); +int fw_fm_rawwrite(uint32_t offset, const void *buf, uint32_t size); +int fw_fm_rawverifywrite(uint32_t offset, const void *buf, uint32_t size); +int fw_fm_rawread(uint32_t offset, void *buf, uint32_t size); +int fw_fm_rawerasesector(uint32_t sector); #define CXD56_SPIFLASHSIZE (16 * 1024 * 1024) @@ -64,8 +64,8 @@ void port_internal_flash_flush(void) { return; } - FM_RawEraseSector(flash_sector); - FM_RawWrite(flash_sector << SECTOR_SHIFT, flash_cache, SECTOR_SIZE); + fw_fm_rawerasesector(flash_sector); + fw_fm_rawwrite(flash_sector << SECTOR_SHIFT, flash_cache, SECTOR_SIZE); flash_sector = NO_SECTOR; } @@ -73,7 +73,7 @@ void port_internal_flash_flush(void) { mp_uint_t supervisor_flash_read_blocks(uint8_t *dest, uint32_t block, uint32_t num_blocks) { supervisor_flash_flush(); - if (FM_RawRead(block << PAGE_SHIFT, dest, num_blocks << PAGE_SHIFT) < 0) { + if (fw_fm_rawread(block << PAGE_SHIFT, dest, num_blocks << PAGE_SHIFT) < 0) { return 1; } @@ -92,7 +92,7 @@ mp_uint_t supervisor_flash_write_blocks(const uint8_t *src, uint32_t lba, uint32 if (sector != flash_sector) { supervisor_flash_flush(); - if (FM_RawRead(sector << SECTOR_SHIFT, flash_cache, SECTOR_SIZE) < 0) { + if (fw_fm_rawread(sector << SECTOR_SHIFT, flash_cache, SECTOR_SIZE) < 0) { return 1; } diff --git a/ports/esp32s2/common-hal/displayio/ParallelBus.c b/ports/esp32s2/common-hal/displayio/ParallelBus.c index d0c98f3611..f77b37b57c 100644 --- a/ports/esp32s2/common-hal/displayio/ParallelBus.c +++ b/ports/esp32s2/common-hal/displayio/ParallelBus.c @@ -33,35 +33,196 @@ #include "shared-bindings/digitalio/DigitalInOut.h" #include "shared-bindings/microcontroller/__init__.h" +/* + * Current pin limitations for ESP32-S2 ParallelBus: + * - data0 pin must be byte aligned + */ + void common_hal_displayio_parallelbus_construct(displayio_parallelbus_obj_t* self, const mcu_pin_obj_t* data0, const mcu_pin_obj_t* command, const mcu_pin_obj_t* chip_select, const mcu_pin_obj_t* write, const mcu_pin_obj_t* read, const mcu_pin_obj_t* reset) { - mp_raise_NotImplementedError(translate("ParallelBus not yet supported")); + uint8_t data_pin = data0->number; + if (data_pin % 8 != 0) { + mp_raise_ValueError(translate("Data 0 pin must be byte aligned.")); + } + + for (uint8_t i = 0; i < 8; i++) { + if (!pin_number_is_free(data_pin + i)) { + mp_raise_ValueError_varg(translate("Bus pin %d is already in use"), i); + } + } + + gpio_dev_t *g = &GPIO; // this is the GPIO registers, see "extern gpio_dev_t GPIO" from file:gpio_struct.h + + // Setup the pins as "Simple GPIO outputs" see section 19.3.3 of the ESP32-S2 Reference Manual + // Enable pins with "enable_w1ts" + + for (uint8_t i = 0; i < 8; i++) { + g->enable_w1ts = (0x1 << (data_pin + i)); + g->func_out_sel_cfg[data_pin + i].val= 256; /* setup output pin for simple GPIO Output, (0x100 = 256) */ + + } + + /* From my understanding, there is a limitation of the ESP32-S2 that does not allow single-byte writes + * into the GPIO registers. See section 10.3.3 regarding "non-aligned writes" into the registers. + */ + + + if (data_pin < 31) { + self->bus = (uint32_t*) &g->out; //pointer to GPIO output register (for pins 0-31) + } else { + self->bus = (uint32_t*) &g->out1.val; //pointer to GPIO output register (for pins >= 32) + } + + /* SNIP - common setup of command, chip select, write and read pins, same as from SAMD and NRF ports */ + self->command.base.type = &digitalio_digitalinout_type; + common_hal_digitalio_digitalinout_construct(&self->command, command); + common_hal_digitalio_digitalinout_switch_to_output(&self->command, true, DRIVE_MODE_PUSH_PULL); + + self->chip_select.base.type = &digitalio_digitalinout_type; + common_hal_digitalio_digitalinout_construct(&self->chip_select, chip_select); + common_hal_digitalio_digitalinout_switch_to_output(&self->chip_select, true, DRIVE_MODE_PUSH_PULL); + + self->write.base.type = &digitalio_digitalinout_type; + common_hal_digitalio_digitalinout_construct(&self->write, write); + common_hal_digitalio_digitalinout_switch_to_output(&self->write, true, DRIVE_MODE_PUSH_PULL); + + self->read.base.type = &digitalio_digitalinout_type; + common_hal_digitalio_digitalinout_construct(&self->read, read); + common_hal_digitalio_digitalinout_switch_to_output(&self->read, true, DRIVE_MODE_PUSH_PULL); + + self->data0_pin = data_pin; + + if (write->number < 32) { + self->write_clear_register = (uint32_t*) &g->out_w1tc; + self->write_set_register = (uint32_t*) &g->out_w1ts; + } else { + self->write_clear_register = (uint32_t*) &g->out1_w1tc.val; + self->write_set_register = (uint32_t*) &g->out1_w1ts.val; + } + + // Check to see if the data and write pins are on the same register: + if ( ( ((self->data0_pin < 32) && (write->number < 32)) ) || + ( ((self->data0_pin > 31) && (write->number > 31)) ) ) { + self->data_write_same_register = true; // data pins and write pin are on the same register + } else { + self->data_write_same_register = false; // data pins and write pins are on different registers + } + + + self->write_mask = 1 << (write->number % 32); /* the write pin triggers the LCD to latch the data */ + + /* SNIP - common setup of the reset pin, same as from SAMD and NRF ports */ + self->reset.base.type = &mp_type_NoneType; + if (reset != NULL) { + self->reset.base.type = &digitalio_digitalinout_type; + common_hal_digitalio_digitalinout_construct(&self->reset, reset); + common_hal_digitalio_digitalinout_switch_to_output(&self->reset, true, DRIVE_MODE_PUSH_PULL); + never_reset_pin_number(reset->number); + common_hal_displayio_parallelbus_reset(self); + } + + never_reset_pin_number(command->number); + never_reset_pin_number(chip_select->number); + never_reset_pin_number(write->number); + never_reset_pin_number(read->number); + for (uint8_t i = 0; i < 8; i++) { + never_reset_pin_number(data_pin + i); + } + } void common_hal_displayio_parallelbus_deinit(displayio_parallelbus_obj_t* self) { + /* SNIP - same as from SAMD and NRF ports */ + for (uint8_t i = 0; i < 8; i++) { + reset_pin_number(self->data0_pin + i); + } + reset_pin_number(self->command.pin->number); + reset_pin_number(self->chip_select.pin->number); + reset_pin_number(self->write.pin->number); + reset_pin_number(self->read.pin->number); + reset_pin_number(self->reset.pin->number); } bool common_hal_displayio_parallelbus_reset(mp_obj_t obj) { - return false; + /* SNIP - same as from SAMD and NRF ports */ + displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); + if (self->reset.base.type == &mp_type_NoneType) { + return false; + } + + common_hal_digitalio_digitalinout_set_value(&self->reset, false); + common_hal_mcu_delay_us(4); + common_hal_digitalio_digitalinout_set_value(&self->reset, true); + return true; + } bool common_hal_displayio_parallelbus_bus_free(mp_obj_t obj) { - return false; + /* SNIP - same as from SAMD and NRF ports */ + return true; } bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { - - return false; + /* SNIP - same as from SAMD and NRF ports */ + displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); + common_hal_digitalio_digitalinout_set_value(&self->chip_select, false); + return true; } void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, - display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { + displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); + common_hal_digitalio_digitalinout_set_value(&self->command, byte_type == DISPLAY_DATA); + + uint32_t* clear_write = self->write_clear_register; + uint32_t* set_write = self->write_set_register; + + const uint32_t mask = self->write_mask; + + /* Setup structures for data writing. The ESP32-S2 port differs from the SAMD and NRF ports + * because I have not found a way to write a single byte into the ESP32-S2 registers. + * For the ESP32-S2, I create a 32-bit data_buffer that is used to transfer the data bytes. + */ + + *clear_write = mask; // Clear the write pin to prepare the registers before storing the + // register value into data_buffer + + const uint32_t data_buffer = *self->bus; // store the initial output register values into the data output buffer + uint8_t* data_address = ((uint8_t*) &data_buffer) + (self->data0_pin / 8); /* address inside data_buffer where + * each data byte will be written to the data pin registers + */ + + + if ( self->data_write_same_register ) { // data and write pins are on the same register + for (uint32_t i = 0; i < data_length; i++) { + + /* Note: If the write pin and data pins are controlled by the same GPIO register, we can eliminate + * the "clear_write" step below, since the write pin is cleared when the data_buffer is written + * to the bus. + */ + + *(data_address) = data[i]; // stuff the data byte into the data_buffer at the correct offset byte location + *self->bus = data_buffer; // write the data to the output register + *set_write = mask; // set the write pin + } + } + else { // data and write pins are on different registers + for (uint32_t i = 0; i < data_length; i++) { + *clear_write = mask; // clear the write pin (See comment above, this may not be necessary). + *(data_address) = data[i]; // stuff the data byte into the data_buffer at the correct offset byte location + *self->bus = data_buffer; // write the data to the output register + *set_write = mask; // set the write pin + + } + } } void common_hal_displayio_parallelbus_end_transaction(mp_obj_t obj) { - + /* SNIP - same as from SAMD and NRF ports */ + displayio_parallelbus_obj_t* self = MP_OBJ_TO_PTR(obj); + common_hal_digitalio_digitalinout_set_value(&self->chip_select, true); } diff --git a/ports/esp32s2/common-hal/displayio/ParallelBus.h b/ports/esp32s2/common-hal/displayio/ParallelBus.h index cd636921d9..84302118bd 100644 --- a/ports/esp32s2/common-hal/displayio/ParallelBus.h +++ b/ports/esp32s2/common-hal/displayio/ParallelBus.h @@ -31,6 +31,17 @@ typedef struct { mp_obj_base_t base; + uint32_t* bus; // pointer where 8 bits of data are written to the display + digitalio_digitalinout_obj_t command; + digitalio_digitalinout_obj_t chip_select; + digitalio_digitalinout_obj_t reset; + digitalio_digitalinout_obj_t write; + digitalio_digitalinout_obj_t read; + uint8_t data0_pin; // pin number for the lowest number data pin. Must be 8-bit aligned + bool data_write_same_register; // if data and write pins are in the sare + uint32_t* write_set_register; // pointer to the write group for setting the write bit to latch the data on the LCD + uint32_t* write_clear_register; // pointer to the write group for clearing the write bit to latch the data on the LCD + uint32_t write_mask; // bit mask for the single bit for the write pin register } displayio_parallelbus_obj_t; #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_DISPLAYIO_PARALLELBUS_H diff --git a/ports/esp32s2/common-hal/socketpool/Socket.c b/ports/esp32s2/common-hal/socketpool/Socket.c index 5e943f8fd0..69ef41c6ec 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.c +++ b/ports/esp32s2/common-hal/socketpool/Socket.c @@ -4,6 +4,7 @@ * The MIT License (MIT) * * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2020 Lucian Copeland for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -37,25 +38,162 @@ #include "components/lwip/lwip/src/include/lwip/sys.h" #include "components/lwip/lwip/src/include/lwip/netdb.h" +STATIC socketpool_socket_obj_t * open_socket_handles[CONFIG_LWIP_MAX_SOCKETS]; // 4 on the wrover/wroom + +void socket_reset(void) { + for (size_t i = 0; i < MP_ARRAY_SIZE(open_socket_handles); i++) { + if (open_socket_handles[i]) { + if (open_socket_handles[i]->num > 0) { + common_hal_socketpool_socket_close(open_socket_handles[i]); + open_socket_handles[i] = NULL; + } else { + // accidentally got a TCP socket in here, or something. + open_socket_handles[i] = NULL; + } + } + } +} + +bool register_open_socket(socketpool_socket_obj_t* self) { + for (size_t i = 0; i < MP_ARRAY_SIZE(open_socket_handles); i++) { + if (open_socket_handles[i] == NULL) { + open_socket_handles[i] = self; + return true; + } + } + return false; +} + +STATIC void _lazy_init_LWIP(socketpool_socket_obj_t* self) { + if (self->num != -1) { + return; //safe to call on existing socket + } + if (self->tls != NULL) { + mp_raise_RuntimeError(translate("Invalid use of TLS Socket")); + } + int socknum = -1; + socknum = lwip_socket(self->family, self->type, self->ipproto); + if (socknum < 0 || !register_open_socket(self)) { + mp_raise_RuntimeError(translate("Out of sockets")); + } + self->num = socknum; + lwip_fcntl(socknum, F_SETFL, O_NONBLOCK); +} + +STATIC void _lazy_init_TLS(socketpool_socket_obj_t* self) { + if (self->type != SOCK_STREAM || self->num != -1) { + mp_raise_RuntimeError(translate("Invalid socket for TLS")); + } + esp_tls_t* tls_handle = esp_tls_init(); + if (tls_handle == NULL) { + mp_raise_espidf_MemoryError(); + } + self->tls = tls_handle; +} + void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, mp_uint_t timeout_ms) { self->timeout_ms = timeout_ms; } -bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const char* host, mp_uint_t hostlen, mp_int_t port) { +bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint8_t port) { + _lazy_init_LWIP(self); + + struct sockaddr_in bind_addr; + bind_addr.sin_addr.s_addr = inet_addr(host); + bind_addr.sin_family = AF_INET; + bind_addr.sin_port = htons(port); + + int opt = 1; + int err = lwip_setsockopt(self->num, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + if (err != 0) { + mp_raise_RuntimeError(translate("Issue setting SO_REUSEADDR")); + } + int result = lwip_bind(self->num, (struct sockaddr *)&bind_addr, sizeof(bind_addr)) == 0; + return result; +} + +bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog) { + return lwip_listen(self->num, backlog) == 0; +} + +socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, + uint8_t* ip, uint *port) { + struct sockaddr_in accept_addr; + socklen_t socklen = sizeof(accept_addr); + int newsoc = -1; + bool timed_out = false; + uint64_t start_ticks = supervisor_ticks_ms64(); + + if (self->timeout_ms != (uint)-1) { + mp_printf(&mp_plat_print, "will timeout"); + } else { + mp_printf(&mp_plat_print, "won't timeout"); + } + + // Allow timeouts and interrupts + while (newsoc == -1 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->timeout_ms != (uint)-1) { + timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; + } + RUN_BACKGROUND_TASKS; + newsoc = lwip_accept(self->num, (struct sockaddr *)&accept_addr, &socklen); + // In non-blocking mode, fail instead of looping + if (newsoc == -1 && self->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } + } + + if (!timed_out) { + // harmless on failure but avoiding memcpy is faster + memcpy((void *)ip, (void*)&accept_addr.sin_addr.s_addr, sizeof(accept_addr.sin_addr.s_addr)); + *port = accept_addr.sin_port; + } else { + mp_raise_OSError(ETIMEDOUT); + } + + if (newsoc > 0) { + // Create the socket + socketpool_socket_obj_t *sock = m_new_obj_with_finaliser(socketpool_socket_obj_t); + sock->base.type = &socketpool_socket_type; + sock->num = newsoc; + sock->tls = NULL; + sock->ssl_context = NULL; + sock->pool = self->pool; + + if (!register_open_socket(sock)) { + mp_raise_OSError(MP_EBADF); + } + + lwip_fcntl(newsoc, F_SETFL, O_NONBLOCK); + return sock; + } else { + mp_raise_OSError(MP_EBADF); + return NULL; + } +} + +bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, + const char* host, mp_uint_t hostlen, mp_int_t port) { // For simplicity we use esp_tls for all TCP connections. If it's not SSL, ssl_context will be // NULL and should still work. This makes regular TCP connections more memory expensive but TLS // should become more and more common. Therefore, we optimize for the TLS case. + // Todo: move to SSL Wrapper and add lwip_connect() + _lazy_init_TLS(self); + esp_tls_cfg_t* tls_config = NULL; if (self->ssl_context != NULL) { tls_config = &self->ssl_context->ssl_config; } - int result = esp_tls_conn_new_sync(host, hostlen, port, tls_config, self->tcp); + int result = esp_tls_conn_new_sync(host, hostlen, port, tls_config, self->tls); self->connected = result >= 0; if (result < 0) { int esp_tls_code; int flags; - esp_err_t err = esp_tls_get_and_clear_last_error(self->tcp->error_handle, &esp_tls_code, &flags); + esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { mp_raise_espidf_MemoryError(); @@ -70,7 +208,7 @@ bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const c // shouldn't hit this timeout because we try to only read available data. However, there is // always a chance that we try to read something that is used internally. int fd; - esp_tls_get_conn_sockfd(self->tcp, &fd); + esp_tls_get_conn_sockfd(self->tls, &fd); struct timeval tv; tv.tv_sec = 2 * 60; // Two minutes tv.tv_usec = 0; @@ -86,7 +224,15 @@ bool common_hal_socketpool_socket_get_connected(socketpool_socket_obj_t* self) { } mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { - size_t sent = esp_tls_conn_write(self->tcp, buf, len); + int sent = -1; + if (self->num != -1) { + // LWIP Socket + // TODO: deal with potential failure/add timeout? + sent = lwip_send(self->num, buf, len, 0); + } else if (self->tls != NULL) { + // TLS Socket + sent = esp_tls_conn_write(self->tls, buf, len); + } if (sent < 0) { mp_raise_OSError(MP_ENOTCONN); @@ -95,45 +241,73 @@ mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const } mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { - size_t received = 0; - int status = 0; - uint64_t start_ticks = supervisor_ticks_ms64(); - int sockfd; - esp_err_t err = esp_tls_get_conn_sockfd(self->tcp, &sockfd); - if (err != ESP_OK) { + int received = 0; + bool timed_out = false; + + if (self->num != -1) { + // LWIP Socket + uint64_t start_ticks = supervisor_ticks_ms64(); + received = -1; + while (received == -1 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->timeout_ms != (uint)-1) { + timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; + } + RUN_BACKGROUND_TASKS; + received = lwip_recv(self->num, (void*) buf, len - 1, 0); + + // In non-blocking mode, fail instead of looping + if (received == -1 && self->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } + } + } else if (self->tls != NULL) { + // TLS Socket + int status = 0; + uint64_t start_ticks = supervisor_ticks_ms64(); + int sockfd; + esp_err_t err = esp_tls_get_conn_sockfd(self->tls, &sockfd); + if (err != ESP_OK) { + mp_raise_OSError(MP_EBADF); + } + while (received == 0 && + status >= 0 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->timeout_ms != (uint)-1) { + timed_out = self->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; + } + RUN_BACKGROUND_TASKS; + size_t available = esp_tls_get_bytes_avail(self->tls); + if (available == 0) { + // This reads the raw socket buffer and is used for non-TLS connections + // and between encrypted TLS blocks. + status = lwip_ioctl(sockfd, FIONREAD, &available); + } + size_t remaining = len - received; + if (available > remaining) { + available = remaining; + } + if (available > 0) { + status = esp_tls_conn_read(self->tls, (void*) buf + received, available); + if (status == 0) { + // Reading zero when something is available indicates a closed + // connection. (The available bytes could have been TLS internal.) + break; + } + if (status > 0) { + received += status; + } + } + } + } else { + // Socket does not have a valid descriptor of either type mp_raise_OSError(MP_EBADF); } - while (received == 0 && - status >= 0 && - (self->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks <= self->timeout_ms) && - !mp_hal_is_interrupted()) { - RUN_BACKGROUND_TASKS; - size_t available = esp_tls_get_bytes_avail(self->tcp); - if (available == 0) { - // This reads the raw socket buffer and is used for non-TLS connections - // and between encrypted TLS blocks. - status = lwip_ioctl(sockfd, FIONREAD, &available); - } - size_t remaining = len - received; - if (available > remaining) { - available = remaining; - } - if (available > 0) { - status = esp_tls_conn_read(self->tcp, (void*) buf + received, available); - if (status == 0) { - // Reading zero when something is available indicates a closed - // connection. (The available bytes could have been TLS internal.) - break; - } - if (status > 0) { - received += status; - } - } - } - if (received == 0) { - // socket closed - common_hal_socketpool_socket_close(self); + if (timed_out) { + mp_raise_OSError(ETIMEDOUT); } return received; } @@ -141,6 +315,8 @@ mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint8_t port, const uint8_t* buf, mp_uint_t len) { + _lazy_init_LWIP(self); + // Get the IP address string const struct addrinfo hints = { .ai_family = AF_INET, @@ -151,17 +327,15 @@ mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, if (error != 0 || result == NULL) { return 0; } - #pragma GCC diagnostic push - #pragma GCC diagnostic ignored "-Wcast-align" - struct in_addr *addr = &((struct sockaddr_in *)result->ai_addr)->sin_addr; - #pragma GCC diagnostic pop - char ip_str[IP4ADDR_STRLEN_MAX]; - inet_ntoa_r(*addr, ip_str, IP4ADDR_STRLEN_MAX); - freeaddrinfo(result); // Set parameters struct sockaddr_in dest_addr; - dest_addr.sin_addr.s_addr = inet_addr((const char *)ip_str); + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wcast-align" + dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result->ai_addr)->sin_addr.s_addr; + #pragma GCC diagnostic pop + freeaddrinfo(result); + dest_addr.sin_family = AF_INET; dest_addr.sin_port = htons(port); @@ -176,26 +350,50 @@ mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, uint8_t* buf, mp_uint_t len, uint8_t* ip, uint *port) { + _lazy_init_LWIP(self); + struct sockaddr_in source_addr; socklen_t socklen = sizeof(source_addr); - int bytes_received = lwip_recvfrom(self->num, buf, len, 0, (struct sockaddr *)&source_addr, &socklen); - memcpy((void *)ip, (void*)&source_addr.sin_addr.s_addr, sizeof source_addr.sin_addr.s_addr); - *port = source_addr.sin_port; + // LWIP Socket + uint64_t start_ticks = supervisor_ticks_ms64(); + int received = -1; + bool timed_out = false; + while (received == -1 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->timeout_ms != (uint)-1) { + timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; + } + RUN_BACKGROUND_TASKS; + received = lwip_recvfrom(self->num, buf, len, 0, (struct sockaddr *)&source_addr, &socklen); - if (bytes_received < 0) { + // In non-blocking mode, fail instead of looping + if (received == -1 && self->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } + } + + if (!timed_out) { + memcpy((void *)ip, (void*)&source_addr.sin_addr.s_addr, sizeof(source_addr.sin_addr.s_addr)); + *port = source_addr.sin_port; + } else { + mp_raise_OSError(ETIMEDOUT); + } + + if (received < 0) { mp_raise_BrokenPipeError(); return 0; } - return bytes_received; + return received; } void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self) { self->connected = false; - if (self->tcp != NULL) { - esp_tls_conn_destroy(self->tcp); - self->tcp = NULL; + if (self->tls != NULL) { + esp_tls_conn_destroy(self->tls); + self->tls = NULL; } if (self->num >= 0) { lwip_shutdown(self->num, 0); @@ -205,7 +403,7 @@ void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self) { } bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self) { - return self->tcp == NULL && self->num < 0; + return self->tls == NULL && self->num < 0; } diff --git a/ports/esp32s2/common-hal/socketpool/Socket.h b/ports/esp32s2/common-hal/socketpool/Socket.h index 62b5ded58e..4e6cfa5ef6 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.h +++ b/ports/esp32s2/common-hal/socketpool/Socket.h @@ -37,11 +37,17 @@ typedef struct { mp_obj_base_t base; int num; + int type; + int family; + int ipproto; bool connected; - esp_tls_t* tcp; + esp_tls_t* tls; ssl_sslcontext_obj_t* ssl_context; socketpool_socketpool_obj_t* pool; mp_uint_t timeout_ms; } socketpool_socket_obj_t; +void socket_reset(void); +bool register_open_socket(socketpool_socket_obj_t* self); + #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SOCKETPOOL_SOCKET_H diff --git a/ports/esp32s2/common-hal/socketpool/SocketPool.c b/ports/esp32s2/common-hal/socketpool/SocketPool.c index 3bec5f337f..5821728ce5 100644 --- a/ports/esp32s2/common-hal/socketpool/SocketPool.c +++ b/ports/esp32s2/common-hal/socketpool/SocketPool.c @@ -65,25 +65,20 @@ socketpool_socket_obj_t* common_hal_socketpool_socket(socketpool_socketpool_obj_ mp_raise_NotImplementedError(translate("Only IPv4 sockets supported")); } - int socknum = -1; - esp_tls_t* tcp_handle = NULL; - if (socket_type == SOCK_DGRAM || socket_type == SOCK_RAW) { - socknum = lwip_socket(addr_family, socket_type, ipproto); - } else { - tcp_handle = esp_tls_init(); - - if (tcp_handle == NULL) { - mp_raise_espidf_MemoryError(); - } - } - if (socknum < 0 && tcp_handle == NULL) { - mp_raise_RuntimeError(translate("Out of sockets")); - } - + // Consider LWIP and MbedTLS "variant" sockets to be incompatible (for now) + // The variant of the socket is determined by whether the socket is wrapped + // by SSL. If no TLS handle is set in sslcontext_wrap_socket, the first call + // of bind() or connect() will create a LWIP socket with a corresponding + // socketnum. + // TODO: move MbedTLS to its own duplicate Socket or Server API, maybe? socketpool_socket_obj_t *sock = m_new_obj_with_finaliser(socketpool_socket_obj_t); sock->base.type = &socketpool_socket_type; - sock->num = socknum; - sock->tcp = tcp_handle; + sock->num = -1; + sock->type = socket_type; + sock->family = addr_family; + sock->ipproto = ipproto; + + sock->tls = NULL; sock->ssl_context = NULL; sock->pool = self; return sock; diff --git a/ports/esp32s2/common-hal/wifi/Radio.c b/ports/esp32s2/common-hal/wifi/Radio.c index 9302300889..574bab0a19 100644 --- a/ports/esp32s2/common-hal/wifi/Radio.c +++ b/ports/esp32s2/common-hal/wifi/Radio.c @@ -72,7 +72,7 @@ void common_hal_wifi_radio_set_enabled(wifi_radio_obj_t *self, bool enabled) { } if (!self->started && enabled) { // esp_wifi_start() would default to soft-AP, thus setting it to station - ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA)); + start_station(self); ESP_ERROR_CHECK(esp_wifi_start()); self->started = true; return; @@ -89,7 +89,9 @@ mp_obj_t common_hal_wifi_radio_start_scanning_networks(wifi_radio_obj_t *self) { if (self->current_scan != NULL) { mp_raise_RuntimeError(translate("Already scanning for wifi networks")); } - // check enabled + if (!common_hal_wifi_radio_get_enabled(self)) { + mp_raise_RuntimeError(translate("wifi is not enabled")); + } start_station(self); wifi_scannednetworks_obj_t *scan = m_new_obj(wifi_scannednetworks_obj_t); @@ -126,7 +128,25 @@ void common_hal_wifi_radio_set_hostname(wifi_radio_obj_t *self, const char *host } wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t* ssid, size_t ssid_len, uint8_t* password, size_t password_len, uint8_t channel, mp_float_t timeout, uint8_t* bssid, size_t bssid_len) { - // check enabled + if (!common_hal_wifi_radio_get_enabled(self)) { + mp_raise_RuntimeError(translate("wifi is not enabled")); + } + + EventBits_t bits; + // can't block since both bits are false after wifi_init + // both bits are true after an existing connection stops + bits = xEventGroupWaitBits(self->event_group_handle, + WIFI_CONNECTED_BIT | WIFI_DISCONNECTED_BIT, + pdTRUE, + pdTRUE, + 0); + if (((bits & WIFI_CONNECTED_BIT) != 0) && + !((bits & WIFI_DISCONNECTED_BIT) != 0)) { + return WIFI_RADIO_ERROR_NONE; + } + // explicitly clear bits since xEventGroupWaitBits may have timed out + xEventGroupClearBits(self->event_group_handle, WIFI_CONNECTED_BIT); + xEventGroupClearBits(self->event_group_handle, WIFI_DISCONNECTED_BIT); start_station(self); wifi_config_t* config = &self->sta_config; @@ -157,7 +177,6 @@ wifi_radio_error_t common_hal_wifi_radio_connect(wifi_radio_obj_t *self, uint8_t self->retries_left = 5; esp_wifi_connect(); - EventBits_t bits; do { RUN_BACKGROUND_TASKS; bits = xEventGroupWaitBits(self->event_group_handle, diff --git a/ports/esp32s2/mpconfigport.h b/ports/esp32s2/mpconfigport.h index 9c0fd9da3e..0cf695bc98 100644 --- a/ports/esp32s2/mpconfigport.h +++ b/ports/esp32s2/mpconfigport.h @@ -30,7 +30,6 @@ #define MICROPY_NLR_THUMB (0) -#define MICROPY_PY_UJSON (1) #define MICROPY_USE_INTERNAL_PRINTF (0) #define MICROPY_PY_SYS_PLATFORM "Espressif ESP32-S2" diff --git a/ports/esp32s2/peripherals/touch.c b/ports/esp32s2/peripherals/touch.c index 6cf33b2bde..cd895b10be 100644 --- a/ports/esp32s2/peripherals/touch.c +++ b/ports/esp32s2/peripherals/touch.c @@ -46,8 +46,13 @@ void peripherals_touch_init(const touch_pad_t touchpad) { if (!touch_inited) { touch_pad_init(); touch_pad_set_fsm_mode(TOUCH_FSM_MODE_TIMER); + } + // touch_pad_config() must be done before touch_pad_fsm_start() the first time. + // Otherwise the calibration is wrong and we get maximum raw values if there is + // a trace of any significant length on the pin. + touch_pad_config(touchpad); + if (!touch_inited) { touch_pad_fsm_start(); touch_inited = true; } - touch_pad_config(touchpad); } diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 6491e7430c..534f7f71bf 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -46,6 +46,7 @@ #include "common-hal/pulseio/PulseIn.h" #include "common-hal/pwmio/PWMOut.h" #include "common-hal/watchdog/WatchDogTimer.h" +#include "common-hal/socketpool/Socket.h" #include "common-hal/wifi/__init__.h" #include "supervisor/memory.h" #include "supervisor/shared/tick.h" @@ -143,9 +144,9 @@ safe_mode_t port_init(void) { case ESP_RST_BROWNOUT: return BROWNOUT; case ESP_RST_PANIC: + return HARD_CRASH; case ESP_RST_INT_WDT: case ESP_RST_WDT: - return HARD_CRASH; default: break; } @@ -222,6 +223,10 @@ void reset_port(void) { #if CIRCUITPY_WIFI wifi_reset(); #endif + +#if CIRCUITPY_SOCKETPOOL + socket_reset(); +#endif } void reset_to_bootloader(void) { diff --git a/ports/litex/mpconfigport.h b/ports/litex/mpconfigport.h index a7caf8526c..5f739e49ea 100644 --- a/ports/litex/mpconfigport.h +++ b/ports/litex/mpconfigport.h @@ -31,8 +31,6 @@ #define CIRCUITPY_INTERNAL_NVM_SIZE (0) #define MICROPY_NLR_THUMB (0) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) -#define MICROPY_PY_UBINASCII (1) -#define MICROPY_PY_UJSON (1) #include "py/circuitpy_mpconfig.h" diff --git a/ports/mimxrt10xx/mpconfigport.h b/ports/mimxrt10xx/mpconfigport.h index 7496256d03..51e0ef9ff5 100644 --- a/ports/mimxrt10xx/mpconfigport.h +++ b/ports/mimxrt10xx/mpconfigport.h @@ -41,8 +41,6 @@ extern uint8_t _ld_default_stack_size; #define CIRCUITPY_DEFAULT_STACK_SIZE ((uint32_t) &_ld_default_stack_size) #define MICROPY_PY_BUILTINS_NOTIMPLEMENTED (0) #define MICROPY_PY_FUNCTION_ATTRS (0) -#define MICROPY_PY_IO (1) -#define MICROPY_PY_UJSON (1) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) diff --git a/ports/nrf/boards/pca10100/mpconfigboard.mk b/ports/nrf/boards/pca10100/mpconfigboard.mk index 76d15e6081..c8cba2877c 100644 --- a/ports/nrf/boards/pca10100/mpconfigboard.mk +++ b/ports/nrf/boards/pca10100/mpconfigboard.mk @@ -25,6 +25,7 @@ CIRCUITPY_RTC = 1 CIRCUITPY_SDCARDIO = 0 CIRCUITPY_TOUCHIO = 0 CIRCUITPY_ULAB = 0 +CIRCUITPY_BUSDEVICE = 0 MICROPY_PY_ASYNC_AWAIT = 0 SUPEROPT_GC = 0 diff --git a/ports/nrf/boards/simmel/mpconfigboard.mk b/ports/nrf/boards/simmel/mpconfigboard.mk index 4eb6c98c7e..032caac408 100644 --- a/ports/nrf/boards/simmel/mpconfigboard.mk +++ b/ports/nrf/boards/simmel/mpconfigboard.mk @@ -13,11 +13,13 @@ INTERNAL_FLASH_FILESYSTEM = 1 CIRCUITPY_AESIO = 1 CIRCUITPY_AUDIOMP3 = 0 +CIRCUITPY_BUSDEVICE = 0 CIRCUITPY_BUSIO = 1 CIRCUITPY_DISPLAYIO = 0 +CIRCUITPY_ERRNO = 0 CIRCUITPY_FRAMEBUFFERIO = 0 -CIRCUITPY_MSGPACK = 0 CIRCUITPY_GAMEPAD = 0 +CIRCUITPY_MSGPACK = 0 CIRCUITPY_NEOPIXEL_WRITE = 0 CIRCUITPY_NVM = 0 CIRCUITPY_PIXELBUF = 0 @@ -28,7 +30,6 @@ CIRCUITPY_SDCARDIO = 0 CIRCUITPY_TOUCHIO = 0 CIRCUITPY_ULAB = 0 CIRCUITPY_WATCHDOG = 1 -CIRCUITPY_BUSDEVICE = 0 # Enable micropython.native #CIRCUITPY_ENABLE_MPY_NATIVE = 1 diff --git a/ports/nrf/mpconfigport.h b/ports/nrf/mpconfigport.h index 4ed42cd829..3ac41a5e47 100644 --- a/ports/nrf/mpconfigport.h +++ b/ports/nrf/mpconfigport.h @@ -35,11 +35,8 @@ #include "peripherals/nrf/nvm.h" // for FLASH_PAGE_SIZE #define MICROPY_PY_FUNCTION_ATTRS (1) -#define MICROPY_PY_IO (1) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) #define MICROPY_PY_SYS_STDIO_BUFFER (1) -#define MICROPY_PY_UBINASCII (1) -#define MICROPY_PY_UJSON (1) // 24kiB stack #define CIRCUITPY_DEFAULT_STACK_SIZE (24*1024) diff --git a/ports/raspberrypi/.gitignore b/ports/raspberrypi/.gitignore new file mode 100644 index 0000000000..414487d53e --- /dev/null +++ b/ports/raspberrypi/.gitignore @@ -0,0 +1 @@ +build-*/ diff --git a/ports/raspberrypi/Makefile b/ports/raspberrypi/Makefile new file mode 100644 index 0000000000..a604acb470 --- /dev/null +++ b/ports/raspberrypi/Makefile @@ -0,0 +1,274 @@ +# This file is part of the MicroPython project, http://micropython.org/ +# +# The MIT License (MIT) +# +# SPDX-FileCopyrightText: Copyright (c) 2019 Dan Halbert for Adafruit Industries +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +# THE SOFTWARE. + +# Select the board to build for. +ifeq ($(BOARD),) + $(error You must provide a BOARD parameter) +else + ifeq ($(wildcard boards/$(BOARD)/.),) + $(error Invalid BOARD specified) + endif +endif + +# If the build directory is not given, make it reflect the board name. +BUILD ?= build-$(BOARD) + +include ../../py/mkenv.mk +# Board-specific +include boards/$(BOARD)/mpconfigboard.mk +# Port-specific +include mpconfigport.mk +# CircuitPython-specific +include $(TOP)/py/circuitpy_mpconfig.mk + +# qstr definitions (must come before including py.mk) +QSTR_DEFS = qstrdefsport.h + +# include py core make definitions +include $(TOP)/py/py.mk + +include $(TOP)/supervisor/supervisor.mk + +# Include make rules and variables common across CircuitPython builds. +include $(TOP)/py/circuitpy_defns.mk + +CROSS_COMPILE = arm-none-eabi- + +HAL_DIR=hal/$(MCU_SERIES) + +INC += -I. \ + -I../.. \ + -I../lib/mp-readline \ + -I../lib/timeutils \ + -Iboards/$(BOARD) \ + -Iboards/ \ + -isystem sdk/ \ + -isystem sdk/src/common/pico_base/include/ \ + -isystem sdk/src/common/pico_binary_info/include/ \ + -isystem sdk/src/common/pico_stdlib/include/ \ + -isystem sdk/src/common/pico_sync/include/ \ + -isystem sdk/src/common/pico_time/include/ \ + -isystem sdk/src/common/pico_util/include/ \ + -isystem sdk/src/rp2040/hardware_regs/include/ \ + -isystem sdk/src/rp2040/hardware_structs/include/ \ + -isystem sdk/src/rp2_common/hardware_adc/include/ \ + -isystem sdk/src/rp2_common/hardware_base/include/ \ + -isystem sdk/src/rp2_common/hardware_claim/include/ \ + -isystem sdk/src/rp2_common/hardware_clocks/include/ \ + -isystem sdk/src/rp2_common/hardware_dma/include/ \ + -isystem sdk/src/rp2_common/hardware_flash/include/ \ + -isystem sdk/src/rp2_common/hardware_gpio/include/ \ + -isystem sdk/src/rp2_common/hardware_irq/include/ \ + -isystem sdk/src/rp2_common/hardware_i2c/include/ \ + -isystem sdk/src/rp2_common/hardware_pio/include/ \ + -isystem sdk/src/rp2_common/hardware_pll/include/ \ + -isystem sdk/src/rp2_common/hardware_resets/include/ \ + -isystem sdk/src/rp2_common/hardware_spi/include/ \ + -isystem sdk/src/rp2_common/hardware_sync/include/ \ + -isystem sdk/src/rp2_common/hardware_timer/include/ \ + -isystem sdk/src/rp2_common/hardware_uart/include/ \ + -isystem sdk/src/rp2_common/hardware_watchdog/include/ \ + -isystem sdk/src/rp2_common/hardware_xosc/include/ \ + -isystem sdk/src/rp2_common/pico_multicore/include/ \ + -isystem sdk/src/rp2_common/pico_fix/rp2040_usb_device_enumeration/include/ \ + -isystem sdk/src/rp2_common/pico_stdio/include/ \ + -isystem sdk/src/rp2_common/pico_printf/include/ \ + -isystem sdk/src/rp2_common/pico_float/include/ \ + -isystem sdk/src/rp2_common/pico_platform/include/ \ + -isystem sdk/src/rp2_common/pico_runtime/printf/include/ \ + -isystem sdk/src/rp2_common/pico_bootrom/include/ \ + -Isdk_config \ + -I../../lib/tinyusb/src \ + -I../../supervisor/shared/usb \ + -I$(BUILD) + +# Pico specific configuration +CFLAGS += -DPICO_ON_DEVICE=1 -DPICO_NO_BINARY_INFO=0 -DPICO_TIME_DEFAULT_ALARM_POOL_DISABLED=1 -DPICO_DIVIDER_CALL_IDIV0=0 -DPICO_DIVIDER_CALL_LDIV0=0 -DPICO_DIVIDER_HARDWARE=1 -DPICO_DOUBLE_ROM=1 -DPICO_FLOAT_ROM=1 -DPICO_MULTICORE=1 -DPICO_BITS_IN_RAM=0 -DPICO_DIVIDER_IN_RAM=0 -DPICO_DOUBLE_PROPAGATE_NANS=0 -DPICO_DOUBLE_IN_RAM=0 -DPICO_MEM_IN_RAM=0 -DPICO_FLOAT_IN_RAM=0 -DPICO_FLOAT_PROPAGATE_NANS=1 -DPICO_NO_FLASH=0 -DPICO_COPY_TO_RAM=0 -DPICO_DISABLE_SHARED_IRQ_HANDLERS=0 +OPTIMIZATION_FLAGS ?= -O3 +# TinyUSB defines +CFLAGS += -DTUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX=1 -DCFG_TUSB_MCU=OPT_MCU_RP2040 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_CDC_RX_BUFSIZE=256 -DCFG_TUD_MIDI_TX_BUFSIZE=128 -DCFG_TUD_CDC_TX_BUFSIZE=256 -DCFG_TUD_MSC_BUFSIZE=1024 + +# option to override default optimization level, set in boards/$(BOARD)/mpconfigboard.mk +CFLAGS += $(OPTIMIZATION_FLAGS) + +#Debugging/Optimization +ifeq ($(DEBUG), 1) + CFLAGS += -ggdb3 -Og + # No LTO because we may place some functions in RAM instead of flash. +else + CFLAGS += -DNDEBUG + + # No LTO because we may place some functions in RAM instead of flash. + + ifdef CFLAGS_BOARD + CFLAGS += $(CFLAGS_BOARD) + endif +endif + +# Remove -Wno-stringop-overflow after we can test with CI's GCC 10. Mac's looks weird. +DISABLE_WARNINGS = -Wno-stringop-overflow -Wno-unused-function -Wno-unused-variable -Wno-strict-overflow -Wno-cast-align -Wno-strict-prototypes -Wno-nested-externs -Wno-double-promotion -Wno-sign-compare + +CFLAGS += $(INC) -Wall -Werror -std=gnu11 -nostdlib -fshort-enums $(BASE_CFLAGS) $(CFLAGS_MOD) $(COPT) $(DISABLE_WARNINGS) + +CFLAGS += \ + -march=armv6-m \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0plus \ + -msoft-float \ + -mfloat-abi=soft + +PICO_LDFLAGS = --specs=nosys.specs -Wl,--wrap=__aeabi_ldiv0 -Wl,--wrap=__aeabi_idiv0 -Wl,--wrap=__aeabi_lmul -Wl,--wrap=__clzsi2 -Wl,--wrap=__clzdi2 -Wl,--wrap=__ctzsi2 -Wl,--wrap=__ctzdi2 -Wl,--wrap=__popcountsi2 -Wl,--wrap=__popcountdi2 -Wl,--wrap=__clz -Wl,--wrap=__clzl -Wl,--wrap=__clzll -Wl,--wrap=__aeabi_idiv -Wl,--wrap=__aeabi_idivmod -Wl,--wrap=__aeabi_ldivmod -Wl,--wrap=__aeabi_uidiv -Wl,--wrap=__aeabi_uidivmod -Wl,--wrap=__aeabi_uldivmod -Wl,--wrap=__aeabi_dadd -Wl,--wrap=__aeabi_ddiv -Wl,--wrap=__aeabi_dmul -Wl,--wrap=__aeabi_drsub -Wl,--wrap=__aeabi_dsub -Wl,--wrap=__aeabi_cdcmpeq -Wl,--wrap=__aeabi_cdrcmple -Wl,--wrap=__aeabi_cdcmple -Wl,--wrap=__aeabi_dcmpeq -Wl,--wrap=__aeabi_dcmplt -Wl,--wrap=__aeabi_dcmple -Wl,--wrap=__aeabi_dcmpge -Wl,--wrap=__aeabi_dcmpgt -Wl,--wrap=__aeabi_dcmpun -Wl,--wrap=__aeabi_i2d -Wl,--wrap=__aeabi_l2d -Wl,--wrap=__aeabi_ui2d -Wl,--wrap=__aeabi_ul2d -Wl,--wrap=__aeabi_d2iz -Wl,--wrap=__aeabi_d2lz -Wl,--wrap=__aeabi_d2uiz -Wl,--wrap=__aeabi_d2ulz -Wl,--wrap=__aeabi_d2f -Wl,--wrap=sqrt -Wl,--wrap=cos -Wl,--wrap=sin -Wl,--wrap=tan -Wl,--wrap=atan2 -Wl,--wrap=exp -Wl,--wrap=log -Wl,--wrap=ldexp -Wl,--wrap=copysign -Wl,--wrap=trunc -Wl,--wrap=floor -Wl,--wrap=ceil -Wl,--wrap=round -Wl,--wrap=sincos -Wl,--wrap=asin -Wl,--wrap=acos -Wl,--wrap=atan -Wl,--wrap=sinh -Wl,--wrap=cosh -Wl,--wrap=tanh -Wl,--wrap=asinh -Wl,--wrap=acosh -Wl,--wrap=atanh -Wl,--wrap=exp2 -Wl,--wrap=log2 -Wl,--wrap=exp10 -Wl,--wrap=log10 -Wl,--wrap=pow -Wl,--wrap=powint -Wl,--wrap=hypot -Wl,--wrap=cbrt -Wl,--wrap=fmod -Wl,--wrap=drem -Wl,--wrap=remainder -Wl,--wrap=remquo -Wl,--wrap=expm1 -Wl,--wrap=log1p -Wl,--wrap=fma -Wl,--wrap=__aeabi_fadd -Wl,--wrap=__aeabi_fdiv -Wl,--wrap=__aeabi_fmul -Wl,--wrap=__aeabi_frsub -Wl,--wrap=__aeabi_fsub -Wl,--wrap=__aeabi_cfcmpeq -Wl,--wrap=__aeabi_cfrcmple -Wl,--wrap=__aeabi_cfcmple -Wl,--wrap=__aeabi_fcmpeq -Wl,--wrap=__aeabi_fcmplt -Wl,--wrap=__aeabi_fcmple -Wl,--wrap=__aeabi_fcmpge -Wl,--wrap=__aeabi_fcmpgt -Wl,--wrap=__aeabi_fcmpun -Wl,--wrap=__aeabi_i2f -Wl,--wrap=__aeabi_l2f -Wl,--wrap=__aeabi_ui2f -Wl,--wrap=__aeabi_ul2f -Wl,--wrap=__aeabi_f2iz -Wl,--wrap=__aeabi_f2lz -Wl,--wrap=__aeabi_f2uiz -Wl,--wrap=__aeabi_f2ulz -Wl,--wrap=__aeabi_f2d -Wl,--wrap=sqrtf -Wl,--wrap=cosf -Wl,--wrap=sinf -Wl,--wrap=tanf -Wl,--wrap=atan2f -Wl,--wrap=expf -Wl,--wrap=logf -Wl,--wrap=ldexpf -Wl,--wrap=copysignf -Wl,--wrap=truncf -Wl,--wrap=floorf -Wl,--wrap=ceilf -Wl,--wrap=roundf -Wl,--wrap=sincosf -Wl,--wrap=asinf -Wl,--wrap=acosf -Wl,--wrap=atanf -Wl,--wrap=sinhf -Wl,--wrap=coshf -Wl,--wrap=tanhf -Wl,--wrap=asinhf -Wl,--wrap=acoshf -Wl,--wrap=atanhf -Wl,--wrap=exp2f -Wl,--wrap=log2f -Wl,--wrap=exp10f -Wl,--wrap=log10f -Wl,--wrap=powf -Wl,--wrap=powintf -Wl,--wrap=hypotf -Wl,--wrap=cbrtf -Wl,--wrap=fmodf -Wl,--wrap=dremf -Wl,--wrap=remainderf -Wl,--wrap=remquof -Wl,--wrap=expm1f -Wl,--wrap=log1pf -Wl,--wrap=fmaf -Wl,--wrap=memcpy -Wl,--wrap=memset -Wl,--wrap=__aeabi_memcpy -Wl,--wrap=__aeabi_memset -Wl,--wrap=__aeabi_memcpy4 -Wl,--wrap=__aeabi_memset4 -Wl,--wrap=__aeabi_memcpy8 -Wl,--wrap=__aeabi_memset8 + +LDFLAGS = $(CFLAGS) $(PICO_LDFLAGS) -Wl,-T,link.ld -Wl,-Map=$@.map -Wl,-cref -Wl,--gc-sections + +# Use toolchain libm if we're not using our own. +ifndef INTERNAL_LIBM +LIBS += -lm +endif + +LDFLAGS += -mthumb -mcpu=cortex-m0plus + +SRC_SDK := \ + src/common/pico_sync/critical_section.c \ + src/common/pico_sync/lock_core.c \ + src/common/pico_sync/mutex.c \ + src/common/pico_time/time.c \ + src/common/pico_util/pheap.c \ + src/rp2_common/hardware_adc/adc.c \ + src/rp2_common/hardware_claim/claim.c \ + src/rp2_common/hardware_clocks/clocks.c \ + src/rp2_common/hardware_dma/dma.c \ + src/rp2_common/hardware_flash/flash.c \ + src/rp2_common/hardware_gpio/gpio.c \ + src/rp2_common/hardware_i2c/i2c.c \ + src/rp2_common/hardware_irq/irq.c \ + src/rp2_common/hardware_pio/pio.c \ + src/rp2_common/hardware_pll/pll.c \ + src/rp2_common/hardware_spi/spi.c \ + src/rp2_common/hardware_sync/sync.c \ + src/rp2_common/hardware_timer/timer.c \ + src/rp2_common/hardware_uart/uart.c \ + src/rp2_common/hardware_watchdog/watchdog.c \ + src/rp2_common/hardware_xosc/xosc.c \ + src/rp2_common/pico_bootrom/bootrom.c \ + src/rp2_common/pico_double/double_init_rom.c \ + src/rp2_common/pico_fix/rp2040_usb_device_enumeration/rp2040_usb_device_enumeration.c \ + src/rp2_common/pico_float/float_init_rom.c \ + src/rp2_common/pico_float/float_math.c \ + src/rp2_common/pico_multicore/multicore.c \ + src/rp2_common/pico_platform/platform.c \ + src/rp2_common/pico_printf/printf.c \ + src/rp2_common/pico_runtime/runtime.c \ + src/rp2_common/pico_stdio/stdio.c \ + +SRC_SDK := $(addprefix sdk/, $(SRC_SDK)) + +SRC_C += \ + boards/$(BOARD)/board.c \ + boards/$(BOARD)/pins.c \ + bindings/rp2pio/StateMachine.c \ + bindings/rp2pio/__init__.c \ + common-hal/rp2pio/StateMachine.c \ + common-hal/rp2pio/__init__.c \ + background.c \ + peripherals/pins.c \ + fatfs_port.c \ + lib/libc/string0.c \ + lib/mp-readline/readline.c \ + lib/oofatfs/ff.c \ + lib/oofatfs/option/ccsbcs.c \ + lib/timeutils/timeutils.c \ + lib/tinyusb/src/portable/raspberrypi/rp2040/dcd_rp2040.c \ + lib/tinyusb/src/portable/raspberrypi/rp2040/rp2040_usb.c \ + lib/utils/buffer_helper.c \ + lib/utils/context_manager_helpers.c \ + lib/utils/interrupt_char.c \ + lib/utils/pyexec.c \ + lib/utils/stdout_helpers.c \ + lib/utils/sys_stdio_mphal.c \ + mphalport.c \ + supervisor/shared/memory.c \ + +SRC_COMMON_HAL_EXPANDED = $(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \ + $(addprefix shared-bindings/, $(SRC_BINDINGS_ENUMS)) \ + $(addprefix common-hal/, $(SRC_COMMON_HAL)) + +SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE)) \ + $(addprefix shared-module/, $(SRC_SHARED_MODULE)) \ + $(addprefix shared-module/, $(SRC_SHARED_MODULE_INTERNAL)) + +# There may be duplicates between SRC_COMMON_HAL_EXPANDED and SRC_SHARED_MODULE_EXPANDED, +# because a few modules have files both in common-hal/ and shared-modules/. +# Doing a $(sort ...) removes duplicates as part of sorting. +SRC_COMMON_HAL_SHARED_MODULE_EXPANDED = $(sort $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED)) + +SRC_S = supervisor/$(CHIP_FAMILY)_cpu.s +SRC_S_UPPER = bs2_default_padded_checksummed.S \ + sdk/src/rp2_common/hardware_divider/divider.S \ + sdk/src/rp2_common/hardware_irq/irq_handler_chain.S \ + sdk/src/rp2_common/pico_bit_ops/bit_ops_aeabi.S \ + sdk/src/rp2_common/pico_double/double_aeabi.S \ + sdk/src/rp2_common/pico_double/double_v1_rom_shim.S \ + sdk/src/rp2_common/pico_divider/divider.S \ + sdk/src/rp2_common/pico_float/float_aeabi.S \ + sdk/src/rp2_common/pico_float/float_v1_rom_shim.S \ + sdk/src/rp2_common/pico_int64_ops/pico_int64_ops_aeabi.S \ + sdk/src/rp2_common/pico_mem_ops/mem_ops_aeabi.S \ + sdk/src/rp2_common/pico_standard_link/crt0.S \ + +OBJ = $(PY_O) $(SUPERVISOR_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o)) +OBJ += $(addprefix $(BUILD)/, $(SRC_SDK:.c=.o)) +OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_SHARED_MODULE_EXPANDED:.c=.o)) +ifeq ($(INTERNAL_LIBM),1) +OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o)) +endif +OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o)) +OBJ += $(addprefix $(BUILD)/, $(SRC_S_UPPER:.S=.o)) +OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o)) + + +SRC_QSTR += $(SRC_C) $(SRC_SUPERVISOR) $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED) + +all: $(BUILD)/firmware.uf2 + +$(BUILD)/firmware.elf: $(OBJ) link.ld + $(STEPECHO) "LINK $@" + $(Q)$(CC) -o $@ $(LDFLAGS) $(OBJ) + $(Q)$(SIZE) $@ | $(PYTHON3) $(TOP)/tools/build_memory_info.py link.ld + +$(BUILD)/firmware.bin: $(BUILD)/firmware.elf + $(STEPECHO) "Create $@" + $(Q)$(OBJCOPY) -O binary $^ $@ + +$(BUILD)/firmware.uf2: $(BUILD)/firmware.bin + $(STEPECHO) "Create $@" + $(Q)$(PYTHON3) $(TOP)/tools/uf2/utils/uf2conv.py -f 0xe48bff56 -b 0x10000000 -c -o $@ $^ + +include $(TOP)/py/mkrules.mk + +# Print out the value of a make variable. +# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile +print-%: + @echo $* = $($*) diff --git a/ports/raspberrypi/README.rst b/ports/raspberrypi/README.rst new file mode 100644 index 0000000000..d6ad9b3335 --- /dev/null +++ b/ports/raspberrypi/README.rst @@ -0,0 +1,18 @@ +RP2040 +================== + +This port supports many development boards that utilize RP2040 chips. See +https://circuitpython.org/downloads for all supported boards. + + +Building +-------- + +For build instructions see this guide: https://learn.adafruit.com/building-circuitpython/ + + +Port Specific modules +--------------------- + +.. toctree:: + ../../shared-bindings/rp2pio/index diff --git a/ports/raspberrypi/background.c b/ports/raspberrypi/background.c new file mode 100644 index 0000000000..c85b83b41e --- /dev/null +++ b/ports/raspberrypi/background.c @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "background.h" + +#include "supervisor/filesystem.h" +#include "supervisor/shared/tick.h" +#include "supervisor/usb.h" + +#include "py/runtime.h" +#include "shared-module/network/__init__.h" +#include "supervisor/shared/stack.h" +#include "supervisor/port.h" + +#if CIRCUITPY_DISPLAYIO +#include "shared-module/displayio/__init__.h" +#endif + +void port_start_background_task(void) {} +void port_finish_background_task(void) {} + +void port_background_task(void) {} diff --git a/ports/raspberrypi/background.h b/ports/raspberrypi/background.h new file mode 100644 index 0000000000..c8e23e2a57 --- /dev/null +++ b/ports/raspberrypi/background.h @@ -0,0 +1,32 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_BACKGROUND_H +#define MICROPY_INCLUDED_RASPBERRYPI_BACKGROUND_H + +#include + +#endif // MICROPY_INCLUDED_RASPBERRYPI_BACKGROUND_H diff --git a/ports/raspberrypi/bindings/rp2pio/StateMachine.c b/ports/raspberrypi/bindings/rp2pio/StateMachine.c new file mode 100644 index 0000000000..0f6f84a565 --- /dev/null +++ b/ports/raspberrypi/bindings/rp2pio/StateMachine.c @@ -0,0 +1,449 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +// This file contains all of the Python API definitions for the +// rp2pio.StateMachine class. + +#include + +#include "shared-bindings/microcontroller/Pin.h" +#include "bindings/rp2pio/StateMachine.h" +#include "shared-bindings/util.h" + +#include "lib/utils/buffer_helper.h" +#include "lib/utils/context_manager_helpers.h" +#include "lib/utils/interrupt_char.h" +#include "py/mperrno.h" +#include "py/objproperty.h" +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + + +//| class StateMachine: +//| """A single PIO StateMachine +//| +//| The programmable I/O peripheral on the RP2 series of microcontrollers is +//| unique. It is a collection of generic state machines that can be +//| used for a variety of protocols. State machines may be independent or +//| coordinated. Program memory and IRQs are shared between the state machines +//| in a particular PIO instance. They are independent otherwise. +//| +//| This class is designed to facilitate sharing of PIO resources. By default, +//| it is assumed that the state machine is used on its own and can be placed +//| in either PIO. State machines with the same program will be placed in the +//| same PIO if possible. To ensure multiple state machines share a PIO use +//| the ``colocate`` kwarg during construction and create them one after another.""" +//| +//| def __init__(self, +//| program: ReadableBuffer, +//| frequency: int, +//| *, +//| init: Optional[ReadableBuffer] = None, +//| first_out_pin: Optional[microcontroller.Pin] = None, +//| out_pin_count: int = 1, +//| first_in_pin: Optional[microcontroller.Pin] = None, +//| in_pin_count: int = 1, +//| first_set_pin: Optional[microcontroller.Pin] = None, +//| set_pin_count: int = 1, +//| first_sideset_pin: Optional[microcontroller.Pin] = None, +//| sideset_pin_count: int = 1, +//| exclusive_pin_use: bool = True, +//| auto_pull: bool = False, +//| pull_threshold : int = 32, +//| out_shift_right : bool = True, +//| auto_push: bool = False, +//| push_threshold : int = 32, +//| in_shift_right : bool = True) -> None: +// //| colocate: Union[int, StateMachine, None] = None +//| +//| """Construct a StateMachine object on the given pins with the given program. +//| +//| :param ReadableBuffer program: the program to run with the state machine +//| :param int frequency: the target clock frequency of the state machine. Actual may be less. +//| :param ReadableBuffer init: a program to run once at start up. This is run after program +//| is started so instructions may be intermingled +//| :param ~microcontroller.Pin first_out_pin: the first pin to use with the OUT instruction +//| :param int out_pin_count: the count of consecutive pins to use with OUT starting at first_out_pin +//| :param ~microcontroller.Pin first_in_pin: the first pin to use with the IN instruction +//| :param int in_pin_count: the count of consecutive pins to use with IN starting at first_in_pin +//| :param ~microcontroller.Pin first_set_pin: the first pin to use with the SET instruction +//| :param int set_pin_count: the count of consecutive pins to use with SET starting at first_set_pin +//| :param ~microcontroller.Pin first_sideset_pin: the first pin to use with a side set +//| :param int sideset_pin_count: the count of consecutive pins to use with a side set starting at first_sideset_pin +//| :param bool exclusive_pin_use: When True, do not share any pins with other state machines. Pins are never shared with other peripherals +//| :param bool auto_pull: When True, automatically load data from the tx FIFO into the +//| output shift register (OSR) when an OUT instruction shifts more than pull_threshold bits +//| :param int pull_threshold: Number of bits to shift before loading a new value into the OSR from the tx FIFO +//| :param bool out_shift_right: When True, data is shifted out the right side (LSB) of the +//| OSR. It is shifted out the left (MSB) otherwise. NOTE! This impacts data alignment +//| when the number of bytes is not a power of two (1, 2 or 4 bytes). +//| :param bool auto_push: When True, automatically save data from input shift register +//| (ISR) into the rx FIFO when an IN instruction shifts more than push_threshold bits +//| :param int push_threshold: Number of bits to shift before saving the ISR value to the RX FIFO +//| :param bool in_shift_right: When True, data is shifted into the right side (LSB) of the +//| ISR. It is shifted into the left (MSB) otherwise. NOTE! This impacts data alignment +//| when the number of bytes is not a power of two (1, 2 or 4 bytes).""" +//| ... +//| + +STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { + rp2pio_statemachine_obj_t *self = m_new_obj(rp2pio_statemachine_obj_t); + self->base.type = &rp2pio_statemachine_type; + enum { ARG_program, ARG_frequency, ARG_init, + ARG_first_out_pin, ARG_out_pin_count, + ARG_first_in_pin, ARG_in_pin_count, + ARG_first_set_pin, ARG_set_pin_count, + ARG_first_sideset_pin, ARG_sideset_pin_count, + ARG_exclusive_pin_use, + ARG_auto_pull, ARG_pull_threshold, ARG_out_shift_right, + ARG_auto_push, ARG_push_threshold, ARG_in_shift_right}; + static const mp_arg_t allowed_args[] = { + { MP_QSTR_program, MP_ARG_REQUIRED | MP_ARG_OBJ }, + { MP_QSTR_frequency, MP_ARG_REQUIRED | MP_ARG_INT }, + { MP_QSTR_init, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, + { MP_QSTR_first_out_pin, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, + { MP_QSTR_out_pin_count, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} }, + { MP_QSTR_first_in_pin, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, + { MP_QSTR_in_pin_count, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} }, + { MP_QSTR_first_set_pin, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, + { MP_QSTR_set_pin_count, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} }, + { MP_QSTR_first_sideset_pin, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} }, + { MP_QSTR_sideset_pin_count, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} }, + { MP_QSTR_exclusive_pin_use, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = true} }, + { MP_QSTR_auto_pull, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, + { MP_QSTR_pull_threshold, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 32} }, + { MP_QSTR_out_shift_right, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = true} }, + { MP_QSTR_auto_push, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, + { MP_QSTR_push_threshold, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 32} }, + { MP_QSTR_in_shift_right, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = true} }, + }; + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(args[ARG_program].u_obj, &bufinfo, MP_BUFFER_READ); + + mp_buffer_info_t init_bufinfo; + init_bufinfo.len = 0; + mp_get_buffer(args[ARG_init].u_obj, &init_bufinfo, MP_BUFFER_READ); + + // We don't validate pin in use here because we may be ok sharing them within a PIO. + mcu_pin_obj_t *first_out_pin = validate_obj_is_pin_or_none(args[ARG_first_out_pin].u_obj); + if (args[ARG_out_pin_count].u_int < 1) { + mp_raise_ValueError(translate("Pin count must be at least 1")); + } + mcu_pin_obj_t *first_in_pin = validate_obj_is_pin_or_none(args[ARG_first_in_pin].u_obj); + if (args[ARG_in_pin_count].u_int < 1) { + mp_raise_ValueError(translate("Pin count must be at least 1")); + } + mcu_pin_obj_t *first_set_pin = validate_obj_is_pin_or_none(args[ARG_first_set_pin].u_obj); + if (args[ARG_set_pin_count].u_int < 1) { + mp_raise_ValueError(translate("Pin count must be at least 1")); + } + if (args[ARG_set_pin_count].u_int > 5) { + mp_raise_ValueError(translate("Set pin count must be between 1 and 5")); + } + mcu_pin_obj_t *first_sideset_pin = validate_obj_is_pin_or_none(args[ARG_first_sideset_pin].u_obj); + if (args[ARG_sideset_pin_count].u_int < 1) { + mp_raise_ValueError(translate("Pin count must be at least 1")); + } + if (args[ARG_sideset_pin_count].u_int > 5) { + mp_raise_ValueError(translate("Side set pin count must be between 1 and 5")); + } + + mp_int_t pull_threshold = args[ARG_pull_threshold].u_int; + mp_int_t push_threshold = args[ARG_push_threshold].u_int; + if (pull_threshold < 1 || pull_threshold > 32) { + mp_raise_ValueError(translate("pull_threshold must be between 1 and 32")); + } + if (push_threshold < 1 || push_threshold > 32) { + mp_raise_ValueError(translate("push_threshold must be between 1 and 32")); + } + + if (bufinfo.len < 2) { + mp_raise_ValueError(translate("Program must contain at least one 16-bit instruction.")); + } + if (bufinfo.len % 2 != 0) { + mp_raise_ValueError(translate("Program size invalid")); + } + if (bufinfo.len > 32) { + mp_raise_ValueError(translate("Program too large")); + } + + if (init_bufinfo.len % 2 != 0) { + mp_raise_ValueError(translate("Init program size invalid")); + } + + common_hal_rp2pio_statemachine_construct(self, + bufinfo.buf, bufinfo.len / 2, + args[ARG_frequency].u_int, + init_bufinfo.buf, init_bufinfo.len / 2, + first_out_pin, args[ARG_out_pin_count].u_int, + first_in_pin, args[ARG_in_pin_count].u_int, + first_set_pin, args[ARG_set_pin_count].u_int, + first_sideset_pin, args[ARG_sideset_pin_count].u_int, + args[ARG_exclusive_pin_use].u_bool, + args[ARG_auto_pull].u_bool, pull_threshold, args[ARG_out_shift_right].u_bool, + args[ARG_auto_push].u_bool, push_threshold, args[ARG_in_shift_right].u_bool); + return MP_OBJ_FROM_PTR(self); +} + +//| def deinit(self) -> None: +//| """Turn off the state machine and release its resources.""" +//| ... +//| +STATIC mp_obj_t rp2pio_statemachine_obj_deinit(mp_obj_t self_in) { + rp2pio_statemachine_obj_t *self = MP_OBJ_TO_PTR(self_in); + common_hal_rp2pio_statemachine_deinit(self); + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_1(rp2pio_statemachine_deinit_obj, rp2pio_statemachine_obj_deinit); + +//| def __enter__(self) -> StateMachine: +//| """No-op used by Context Managers. +//| Provided by context manager helper.""" +//| ... +//| + +//| def __exit__(self) -> None: +//| """Automatically deinitializes the hardware when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| +STATIC mp_obj_t rp2pio_statemachine_obj___exit__(size_t n_args, const mp_obj_t *args) { + (void)n_args; + common_hal_rp2pio_statemachine_deinit(args[0]); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(rp2pio_statemachine_obj___exit___obj, 4, 4, rp2pio_statemachine_obj___exit__); + + +STATIC void check_for_deinit(rp2pio_statemachine_obj_t *self) { + if (common_hal_rp2pio_statemachine_deinited(self)) { + raise_deinited_error(); + } +} + +// // | def restart(self, *other_state_machines) -> None: +// // | """Restarts this state machine and any others given. They must share +// // | an underlying PIO. An exception will be raised otherwise.""" +// // | ... +// // | + +//| def write(self, buffer: ReadableBuffer, *, start: int = 0, end: Optional[int] = None) -> None: +//| """Write the data contained in ``buffer`` to the state machine. If the buffer is empty, nothing happens. +//| +//| :param ~_typing.ReadableBuffer buffer: Write out the data in this buffer +//| :param int start: Start of the slice of ``buffer`` to write out: ``buffer[start:end]`` +//| :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)``""" +//| ... +//| + +STATIC mp_obj_t rp2pio_statemachine_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { + enum { ARG_buffer, ARG_start, ARG_end }; + static const mp_arg_t allowed_args[] = { + { MP_QSTR_buffer, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, + { MP_QSTR_start, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, + { MP_QSTR_end, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = INT_MAX} }, + }; + rp2pio_statemachine_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); + check_for_deinit(self); + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(args[ARG_buffer].u_obj, &bufinfo, MP_BUFFER_READ); + int32_t start = args[ARG_start].u_int; + size_t length = bufinfo.len; + normalize_buffer_bounds(&start, args[ARG_end].u_int, &length); + + if (length == 0) { + return mp_const_none; + } + + bool ok = common_hal_rp2pio_statemachine_write(self, ((uint8_t*)bufinfo.buf) + start, length); + if (mp_hal_is_interrupted()) { + return mp_const_none; + } + if (!ok) { + mp_raise_OSError(MP_EIO); + } + return mp_const_none; +} +MP_DEFINE_CONST_FUN_OBJ_KW(rp2pio_statemachine_write_obj, 2, rp2pio_statemachine_write); + + +// // | def readinto(self, buffer: WriteableBuffer, *, start: int = 0, end: Optional[int] = None) -> None: +// // | """Read into ``buffer``. If the number of bytes to read is 0, nothing happens. +// // | +// // | :param ~_typing.WriteableBuffer buffer: Read data into this buffer +// // | :param int start: Start of the slice of ``buffer`` to read into: ``buffer[start:end]`` +// // | :param int end: End of the slice; this index is not included. Defaults to ``len(buffer)`` +// // | :param int write_value: Value to write while reading. (Usually ignored.)""" +// // | ... +// // | + +// STATIC mp_obj_t rp2pio_statemachine_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { +// enum { ARG_buffer, ARG_start, ARG_end, ARG_write_value }; +// static const mp_arg_t allowed_args[] = { +// { MP_QSTR_buffer, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, +// { MP_QSTR_start, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, +// { MP_QSTR_end, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = INT_MAX} }, +// { MP_QSTR_write_value,MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, +// }; +// rp2pio_statemachine_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); +// check_for_deinit(self); +// check_lock(self); +// mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; +// mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + +// mp_buffer_info_t bufinfo; +// mp_get_buffer_raise(args[ARG_buffer].u_obj, &bufinfo, MP_BUFFER_WRITE); +// int32_t start = args[ARG_start].u_int; +// size_t length = bufinfo.len; +// normalize_buffer_bounds(&start, args[ARG_end].u_int, &length); + +// if (length == 0) { +// return mp_const_none; +// } + +// bool ok = common_hal_rp2pio_statemachine_read(self, ((uint8_t*)bufinfo.buf) + start, length, args[ARG_write_value].u_int); +// if (!ok) { +// mp_raise_OSError(MP_EIO); +// } +// return mp_const_none; +// } +// MP_DEFINE_CONST_FUN_OBJ_KW(rp2pio_statemachine_readinto_obj, 2, rp2pio_statemachine_readinto); + +// //| def write_readinto(self, buffer_out: ReadableBuffer, buffer_in: WriteableBuffer, *, out_start: int = 0, out_end: Optional[int] = None, in_start: int = 0, in_end: Optional[int] = None) -> None: +// //| """Write out the data in ``buffer_out`` while simultaneously reading data into ``buffer_in``. +// //| The SPI object must be locked. +// //| The lengths of the slices defined by ``buffer_out[out_start:out_end]`` and ``buffer_in[in_start:in_end]`` +// //| must be equal. +// //| If buffer slice lengths are both 0, nothing happens. +// //| +// //| :param ~_typing.ReadableBuffer buffer_out: Write out the data in this buffer +// //| :param ~_typing.WriteableBuffer buffer_in: Read data into this buffer +// //| :param int out_start: Start of the slice of buffer_out to write out: ``buffer_out[out_start:out_end]`` +// //| :param int out_end: End of the slice; this index is not included. Defaults to ``len(buffer_out)`` +// //| :param int in_start: Start of the slice of ``buffer_in`` to read into: ``buffer_in[in_start:in_end]`` +// //| :param int in_end: End of the slice; this index is not included. Defaults to ``len(buffer_in)``""" +// //| ... +// //| + +// STATIC mp_obj_t rp2pio_statemachine_write_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { +// enum { ARG_buffer_out, ARG_buffer_in, ARG_out_start, ARG_out_end, ARG_in_start, ARG_in_end }; +// static const mp_arg_t allowed_args[] = { +// { MP_QSTR_buffer_out, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, +// { MP_QSTR_buffer_in, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} }, +// { MP_QSTR_out_start, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, +// { MP_QSTR_out_end, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = INT_MAX} }, +// { MP_QSTR_in_start, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, +// { MP_QSTR_in_end, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = INT_MAX} }, +// }; +// rp2pio_statemachine_obj_t *self = MP_OBJ_TO_PTR(pos_args[0]); +// check_for_deinit(self); +// check_lock(self); +// mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; +// mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + +// mp_buffer_info_t buf_out_info; +// mp_get_buffer_raise(args[ARG_buffer_out].u_obj, &buf_out_info, MP_BUFFER_READ); +// int32_t out_start = args[ARG_out_start].u_int; +// size_t out_length = buf_out_info.len; +// normalize_buffer_bounds(&out_start, args[ARG_out_end].u_int, &out_length); + +// mp_buffer_info_t buf_in_info; +// mp_get_buffer_raise(args[ARG_buffer_in].u_obj, &buf_in_info, MP_BUFFER_WRITE); +// int32_t in_start = args[ARG_in_start].u_int; +// size_t in_length = buf_in_info.len; +// normalize_buffer_bounds(&in_start, args[ARG_in_end].u_int, &in_length); + +// if (out_length != in_length) { +// mp_raise_ValueError(translate("buffer slices must be of equal length")); +// } + +// if (out_length == 0) { +// return mp_const_none; +// } + +// bool ok = common_hal_rp2pio_statemachine_transfer(self, +// ((uint8_t*)buf_out_info.buf) + out_start, +// ((uint8_t*)buf_in_info.buf) + in_start, +// out_length); +// if (!ok) { +// mp_raise_OSError(MP_EIO); +// } +// return mp_const_none; +// } +// MP_DEFINE_CONST_FUN_OBJ_KW(rp2pio_statemachine_write_readinto_obj, 2, rp2pio_statemachine_write_readinto); + +//| frequency: int +//| """The actual state machine frequency. This may not match the frequency requested +//| due to internal limitations.""" +//| + +STATIC mp_obj_t rp2pio_statemachine_obj_get_frequency(mp_obj_t self_in) { + rp2pio_statemachine_obj_t *self = MP_OBJ_TO_PTR(self_in); + check_for_deinit(self); + return MP_OBJ_NEW_SMALL_INT(common_hal_rp2pio_statemachine_get_frequency(self)); +} +MP_DEFINE_CONST_FUN_OBJ_1(rp2pio_statemachine_get_frequency_obj, rp2pio_statemachine_obj_get_frequency); + +const mp_obj_property_t rp2pio_statemachine_frequency_obj = { + .base.type = &mp_type_property, + .proxy = {(mp_obj_t)&rp2pio_statemachine_get_frequency_obj, + (mp_obj_t)&mp_const_none_obj, + (mp_obj_t)&mp_const_none_obj}, +}; + +STATIC const mp_rom_map_elem_t rp2pio_statemachine_locals_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&rp2pio_statemachine_deinit_obj) }, + { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, + { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&rp2pio_statemachine_obj___exit___obj) }, + +// { MP_ROM_QSTR(MP_QSTR_restart), MP_ROM_PTR(&rp2pio_statemachine_configure_obj) }, + +// { MP_ROM_QSTR(MP_QSTR_readinto), MP_ROM_PTR(&rp2pio_statemachine_readinto_obj) }, + { MP_ROM_QSTR(MP_QSTR_write), MP_ROM_PTR(&rp2pio_statemachine_write_obj) }, +// { MP_ROM_QSTR(MP_QSTR_write_readinto), MP_ROM_PTR(&rp2pio_statemachine_write_readinto_obj) }, + { MP_ROM_QSTR(MP_QSTR_frequency), MP_ROM_PTR(&rp2pio_statemachine_frequency_obj) } +}; +STATIC MP_DEFINE_CONST_DICT(rp2pio_statemachine_locals_dict, rp2pio_statemachine_locals_dict_table); + +const mp_obj_type_t rp2pio_statemachine_type = { + { &mp_type_type }, + .name = MP_QSTR_StateMachine, + .make_new = rp2pio_statemachine_make_new, + .locals_dict = (mp_obj_dict_t*)&rp2pio_statemachine_locals_dict, +}; + +rp2pio_statemachine_obj_t *validate_obj_is_statemachine(mp_obj_t obj) { + if (!MP_OBJ_IS_TYPE(obj, &rp2pio_statemachine_type)) { + mp_raise_TypeError_varg(translate("Expected a %q"), rp2pio_statemachine_type.name); + } + return MP_OBJ_TO_PTR(obj); +} diff --git a/ports/raspberrypi/bindings/rp2pio/StateMachine.h b/ports/raspberrypi/bindings/rp2pio/StateMachine.h new file mode 100644 index 0000000000..5ff20a75bf --- /dev/null +++ b/ports/raspberrypi/bindings/rp2pio/StateMachine.h @@ -0,0 +1,71 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_BINDINGS_RP2PIO_STATEMACHINE_H +#define MICROPY_INCLUDED_RASPBERRYPI_BINDINGS_RP2PIO_STATEMACHINE_H + +#include "py/obj.h" + +#include "common-hal/microcontroller/Pin.h" +#include "common-hal/rp2pio/StateMachine.h" + +// Type object used in Python. Should be shared between ports. +extern const mp_obj_type_t rp2pio_statemachine_type; + +// Construct an underlying SPI object. +extern void common_hal_rp2pio_statemachine_construct(rp2pio_statemachine_obj_t *self, + const uint16_t* program, size_t program_len, + size_t frequency, + const uint16_t* init, size_t init_len, + const mcu_pin_obj_t * first_out_pin, uint8_t out_pin_count, + const mcu_pin_obj_t * first_in_pin, uint8_t in_pin_count, + const mcu_pin_obj_t * first_set_pin, uint8_t set_pin_count, + const mcu_pin_obj_t * first_sideset_pin, uint8_t sideset_pin_count, + bool exclusive_pin_use, + bool auto_pull, uint8_t pull_threshold, bool out_shift_right, + bool auto_push, uint8_t push_threshold, bool in_shift_right); + +extern void common_hal_rp2pio_statemachine_deinit(rp2pio_statemachine_obj_t *self); +extern bool common_hal_rp2pio_statemachine_deinited(rp2pio_statemachine_obj_t *self); + +// Writes out the given data. +extern bool common_hal_rp2pio_statemachine_write(rp2pio_statemachine_obj_t *self, const uint8_t *data, size_t len); + +// // Reads in len bytes while outputting zeroes. +// extern bool common_hal_rp2pio_statemachine_read(rp2pio_statemachine_obj_t *self, uint8_t *data, size_t len, uint8_t write_value); + +// // Reads and write len bytes simultaneously. +// extern bool common_hal_rp2pio_statemachine_transfer(rp2pio_statemachine_obj_t *self, +// const uint8_t *data_out, size_t out_len, +// uint8_t *data_in, size_t in_len); + +// Return actual SPI bus frequency. +uint32_t common_hal_rp2pio_statemachine_get_frequency(rp2pio_statemachine_obj_t* self); + +// This is used by the supervisor to claim SPI devices indefinitely. +// extern void common_hal_rp2pio_statemachine_never_reset(rp2pio_statemachine_obj_t *self); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_BINDINGS_RP2PIO_STATEMACHINE_H diff --git a/ports/raspberrypi/bindings/rp2pio/__init__.c b/ports/raspberrypi/bindings/rp2pio/__init__.c new file mode 100644 index 0000000000..dd5808cd5e --- /dev/null +++ b/ports/raspberrypi/bindings/rp2pio/__init__.c @@ -0,0 +1,45 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/obj.h" +#include "py/runtime.h" + +#include "bindings/rp2pio/StateMachine.h" + +//| """Hardware interface to RP2 series' programmable IO (PIO) peripheral.""" +//| + +STATIC const mp_rom_map_elem_t rp2pio_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_rp2pio) }, + { MP_ROM_QSTR(MP_QSTR_StateMachine), MP_ROM_PTR(&rp2pio_statemachine_type) }, +}; + +STATIC MP_DEFINE_CONST_DICT(rp2pio_module_globals, rp2pio_module_globals_table); + +const mp_obj_module_t rp2pio_module = { + .base = { &mp_type_module }, + .globals = (mp_obj_dict_t*)&rp2pio_module_globals, +}; diff --git a/ports/raspberrypi/boards/adafruit_feather_rp2040/board.c b/ports/raspberrypi/boards/adafruit_feather_rp2040/board.c new file mode 100644 index 0000000000..8686f6d0c2 --- /dev/null +++ b/ports/raspberrypi/boards/adafruit_feather_rp2040/board.c @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "supervisor/board.h" + +#include "shared-bindings/microcontroller/Pin.h" +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" + +void board_init(void) { + common_hal_never_reset_pin(&pin_GPIO17); + gpio_init(17); + gpio_set_dir(17, GPIO_OUT); + gpio_put(17, true); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/raspberrypi/boards/adafruit_feather_rp2040/mpconfigboard.h b/ports/raspberrypi/boards/adafruit_feather_rp2040/mpconfigboard.h new file mode 100644 index 0000000000..6a2d063d79 --- /dev/null +++ b/ports/raspberrypi/boards/adafruit_feather_rp2040/mpconfigboard.h @@ -0,0 +1,14 @@ +#define MICROPY_HW_BOARD_NAME "Adafruit Feather RP2040" +#define MICROPY_HW_MCU_NAME "rp2040" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO16) + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO3) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO18) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO19) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO20) + +// #define DEFAULT_UART_BUS_RX (&pin_PA11) +// #define DEFAULT_UART_BUS_TX (&pin_PA10) diff --git a/ports/raspberrypi/boards/adafruit_feather_rp2040/mpconfigboard.mk b/ports/raspberrypi/boards/adafruit_feather_rp2040/mpconfigboard.mk new file mode 100644 index 0000000000..f4106b94a2 --- /dev/null +++ b/ports/raspberrypi/boards/adafruit_feather_rp2040/mpconfigboard.mk @@ -0,0 +1,9 @@ +USB_VID = 0x239A +USB_PID = 0x80F2 +USB_PRODUCT = "Feather RP2040" +USB_MANUFACTURER = "Adafruit" + +CHIP_VARIANT = RP2040 +CHIP_FAMILY = rp2 + +INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/raspberrypi/boards/adafruit_feather_rp2040/pins.c b/ports/raspberrypi/boards/adafruit_feather_rp2040/pins.c new file mode 100644 index 0000000000..1617ac865e --- /dev/null +++ b/ports/raspberrypi/boards/adafruit_feather_rp2040/pins.c @@ -0,0 +1,36 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) }, + { MP_ROM_QSTR(MP_QSTR_D24), MP_ROM_PTR(&pin_GPIO24) }, + { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO17) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + // { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/raspberrypi/boards/raspberry_pi_pico/board.c b/ports/raspberrypi/boards/raspberry_pi_pico/board.c new file mode 100644 index 0000000000..80ec5de32b --- /dev/null +++ b/ports/raspberrypi/boards/raspberry_pi_pico/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "supervisor/board.h" + +void board_init(void) +{ +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.h b/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.h new file mode 100644 index 0000000000..4b0a220287 --- /dev/null +++ b/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.h @@ -0,0 +1,15 @@ +// LEDs +// #define MICROPY_HW_LED_STATUS (&pin_PA17) + +#define MICROPY_HW_BOARD_NAME "Raspberry Pi Pico" +#define MICROPY_HW_MCU_NAME "rp2040" + +// #define DEFAULT_I2C_BUS_SCL (&pin_PA23) +// #define DEFAULT_I2C_BUS_SDA (&pin_PA22) + +// #define DEFAULT_SPI_BUS_SCK (&pin_PB11) +// #define DEFAULT_SPI_BUS_MOSI (&pin_PB10) +// #define DEFAULT_SPI_BUS_MISO (&pin_PA12) + +// #define DEFAULT_UART_BUS_RX (&pin_PA11) +// #define DEFAULT_UART_BUS_TX (&pin_PA10) diff --git a/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.mk b/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.mk new file mode 100644 index 0000000000..69ff56fef8 --- /dev/null +++ b/ports/raspberrypi/boards/raspberry_pi_pico/mpconfigboard.mk @@ -0,0 +1,9 @@ +USB_VID = 0x239A +USB_PID = 0x80F4 +USB_PRODUCT = "Pico" +USB_MANUFACTURER = "Raspberry Pi" + +CHIP_VARIANT = RP2040 +CHIP_FAMILY = rp2 + +INTERNAL_FLASH_FILESYSTEM = 1 diff --git a/ports/raspberrypi/boards/raspberry_pi_pico/pins.c b/ports/raspberrypi/boards/raspberry_pi_pico/pins.c new file mode 100644 index 0000000000..913676ad26 --- /dev/null +++ b/ports/raspberrypi/boards/raspberry_pi_pico/pins.c @@ -0,0 +1,39 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_GP0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_GP1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_GP2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_GP3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_GP4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_GP5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_GP6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_GP7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_GP8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_GP9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_GP10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_GP11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_GP12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_GP13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_GP14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_GP15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_GP16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_GP17), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_GP18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_GP19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_GP20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_GP21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_GP22), MP_ROM_PTR(&pin_GPIO22) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO25) }, + { MP_ROM_QSTR(MP_QSTR_GP25), MP_ROM_PTR(&pin_GPIO25) }, + { MP_ROM_QSTR(MP_QSTR_GP26_A0), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_GP26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_GP27_A1), MP_ROM_PTR(&pin_GPIO27) }, + { MP_ROM_QSTR(MP_QSTR_GP27), MP_ROM_PTR(&pin_GPIO27) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO27) }, + { MP_ROM_QSTR(MP_QSTR_GP28_A2), MP_ROM_PTR(&pin_GPIO28) }, + { MP_ROM_QSTR(MP_QSTR_GP28), MP_ROM_PTR(&pin_GPIO28) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/raspberrypi/bs2_default_padded_checksummed.S b/ports/raspberrypi/bs2_default_padded_checksummed.S new file mode 100644 index 0000000000..d77f4867c6 --- /dev/null +++ b/ports/raspberrypi/bs2_default_padded_checksummed.S @@ -0,0 +1,20 @@ +// Padded and checksummed version of: /Users/graham/dev/mu/pico_sdk/cmake-build-debug-mu/src/rp2_common/boot_stage2/bs2_default.bin + +.section .boot2, "a" + +.byte 0x00, 0xb5, 0x2f, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60 +.byte 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2b, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x02, 0x21, 0x59, 0x61 +.byte 0x01, 0x21, 0xf0, 0x22, 0x99, 0x50, 0x28, 0x49, 0x19, 0x60, 0x01, 0x21, 0x99, 0x60, 0x35, 0x20 +.byte 0x00, 0xf0, 0x3e, 0xf8, 0x02, 0x22, 0x90, 0x42, 0x14, 0xd0, 0x06, 0x21, 0x19, 0x66, 0x00, 0xf0 +.byte 0x2e, 0xf8, 0x19, 0x6e, 0x01, 0x21, 0x19, 0x66, 0x00, 0x20, 0x18, 0x66, 0x1a, 0x66, 0x00, 0xf0 +.byte 0x26, 0xf8, 0x19, 0x6e, 0x19, 0x6e, 0x19, 0x6e, 0x05, 0x20, 0x00, 0xf0, 0x29, 0xf8, 0x01, 0x21 +.byte 0x08, 0x42, 0xf9, 0xd1, 0x00, 0x21, 0x99, 0x60, 0x18, 0x49, 0x19, 0x60, 0x00, 0x21, 0x59, 0x60 +.byte 0x17, 0x49, 0x18, 0x48, 0x01, 0x60, 0x01, 0x21, 0x99, 0x60, 0xeb, 0x21, 0x19, 0x66, 0xa0, 0x21 +.byte 0x19, 0x66, 0x00, 0xf0, 0x0c, 0xf8, 0x00, 0x21, 0x99, 0x60, 0x13, 0x49, 0x11, 0x48, 0x01, 0x60 +.byte 0x01, 0x21, 0x99, 0x60, 0x01, 0xbc, 0x00, 0x28, 0x00, 0xd1, 0x10, 0x48, 0x00, 0x47, 0x03, 0xb5 +.byte 0x99, 0x6a, 0x04, 0x20, 0x01, 0x42, 0xfb, 0xd0, 0x01, 0x20, 0x01, 0x42, 0xf8, 0xd1, 0x03, 0xbd +.byte 0x02, 0xb5, 0x18, 0x66, 0x18, 0x66, 0xff, 0xf7, 0xf2, 0xff, 0x18, 0x6e, 0x18, 0x6e, 0x02, 0xbd +.byte 0x00, 0x00, 0x02, 0x40, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x07, 0x00, 0x00, 0x03, 0x5f, 0x00 +.byte 0x21, 0x22, 0x00, 0x00, 0xf4, 0x00, 0x00, 0x18, 0x22, 0x20, 0x00, 0xa0, 0x01, 0x01, 0x00, 0x10 +.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x27, 0x2a, 0x60 diff --git a/ports/raspberrypi/common-hal/analogio/AnalogIn.c b/ports/raspberrypi/common-hal/analogio/AnalogIn.c new file mode 100644 index 0000000000..c51a749295 --- /dev/null +++ b/ports/raspberrypi/common-hal/analogio/AnalogIn.c @@ -0,0 +1,73 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "common-hal/analogio/AnalogIn.h" +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +#include "src/rp2_common/hardware_adc/include/hardware/adc.h" + +#define ADC_FIRST_PIN_NUMBER 26 +#define ADC_PIN_COUNT 4 + +void common_hal_analogio_analogin_construct(analogio_analogin_obj_t *self, const mcu_pin_obj_t *pin) { + if (pin->number < ADC_FIRST_PIN_NUMBER || pin->number > ADC_FIRST_PIN_NUMBER + ADC_PIN_COUNT) { + mp_raise_ValueError(translate("Pin does not have ADC capabilities")); + } + + adc_init(); + + adc_gpio_init(pin->number); + + claim_pin(pin); + self->pin = pin; +} + +bool common_hal_analogio_analogin_deinited(analogio_analogin_obj_t *self) { + return self->pin == NULL; +} + +void common_hal_analogio_analogin_deinit(analogio_analogin_obj_t *self) { + if (common_hal_analogio_analogin_deinited(self)) { + return; + } + + reset_pin_number(self->pin->number); + self->pin = NULL; +} + +uint16_t common_hal_analogio_analogin_get_value(analogio_analogin_obj_t *self) { + adc_select_input(self->pin->number - ADC_FIRST_PIN_NUMBER); + uint16_t value = adc_read(); + + // Map value to from 12 to 16 bits + return (value << 4); +} + +float common_hal_analogio_analogin_get_reference_voltage(analogio_analogin_obj_t *self) { + // The nominal VCC voltage + return 3.3f; +} diff --git a/ports/raspberrypi/common-hal/analogio/AnalogIn.h b/ports/raspberrypi/common-hal/analogio/AnalogIn.h new file mode 100644 index 0000000000..ee9976e348 --- /dev/null +++ b/ports/raspberrypi/common-hal/analogio/AnalogIn.h @@ -0,0 +1,41 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_ANALOGIO_ANALOGIN_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_ANALOGIO_ANALOGIN_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + const mcu_pin_obj_t * pin; +} analogio_analogin_obj_t; + +void analogin_init(void); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_ANALOGIO_ANALOGIN_H diff --git a/ports/raspberrypi/common-hal/analogio/AnalogOut.c b/ports/raspberrypi/common-hal/analogio/AnalogOut.c new file mode 100644 index 0000000000..adafa15d5c --- /dev/null +++ b/ports/raspberrypi/common-hal/analogio/AnalogOut.c @@ -0,0 +1,48 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2018 Dan Halbert for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/analogio/AnalogOut.h" + +#include +#include + +#include "py/mperrno.h" +#include "py/runtime.h" +#include "supervisor/shared/translate.h" + +void common_hal_analogio_analogout_construct(analogio_analogout_obj_t* self, const mcu_pin_obj_t *pin) { + mp_raise_RuntimeError(translate("AnalogOut functionality not supported")); +} + +bool common_hal_analogio_analogout_deinited(analogio_analogout_obj_t *self) { + return true; +} + +void common_hal_analogio_analogout_deinit(analogio_analogout_obj_t *self) { +} + +void common_hal_analogio_analogout_set_value(analogio_analogout_obj_t *self, uint16_t value) { +} diff --git a/ports/raspberrypi/common-hal/analogio/AnalogOut.h b/ports/raspberrypi/common-hal/analogio/AnalogOut.h new file mode 100644 index 0000000000..7c7a61aa2d --- /dev/null +++ b/ports/raspberrypi/common-hal/analogio/AnalogOut.h @@ -0,0 +1,36 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Scott Shawcroft + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_ANALOGIO_ANALOGOUT_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_ANALOGIO_ANALOGOUT_H + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; +} analogio_analogout_obj_t; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_ANALOGIO_ANALOGOUT_H diff --git a/ports/raspberrypi/common-hal/analogio/__init__.c b/ports/raspberrypi/common-hal/analogio/__init__.c new file mode 100644 index 0000000000..eea58c77d6 --- /dev/null +++ b/ports/raspberrypi/common-hal/analogio/__init__.c @@ -0,0 +1 @@ +// No analogio module functions. diff --git a/ports/raspberrypi/common-hal/board/__init__.c b/ports/raspberrypi/common-hal/board/__init__.c new file mode 100644 index 0000000000..3c7f30df22 --- /dev/null +++ b/ports/raspberrypi/common-hal/board/__init__.c @@ -0,0 +1,34 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include + +#include "py/runtime.h" +#include "py/mphal.h" +#include "common-hal/microcontroller/Pin.h" + +// Pins aren't actually defined here. They are in the board specific directory +// such as boards/arduino_zero/pins.c. diff --git a/ports/raspberrypi/common-hal/busio/I2C.c b/ports/raspberrypi/common-hal/busio/I2C.c new file mode 100644 index 0000000000..fa49e375e2 --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/I2C.c @@ -0,0 +1,175 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/busio/I2C.h" +#include "py/mperrno.h" +#include "py/runtime.h" + +#include "shared-bindings/microcontroller/__init__.h" +#include "supervisor/shared/translate.h" + +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" + +// Synopsys DW_apb_i2c (v2.01) IP + +#define NO_PIN 0xff + +STATIC bool never_reset_i2c[2]; +STATIC i2c_inst_t* i2c[2] = {i2c0, i2c1}; + +void reset_i2c(void) { + for (size_t i = 0; i < 2; i++) { + if (never_reset_i2c[i]) { + continue; + } + + i2c_deinit(i2c[i]); + } +} + +void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, + const mcu_pin_obj_t* scl, const mcu_pin_obj_t* sda, uint32_t frequency, uint32_t timeout) { + self->peripheral = NULL; + // I2C pins have a regular pattern. SCL is always odd and SDA is even. They match up in pairs + // so we can divide by two to get the instance. This pattern repeats. + if (scl->number % 2 == 1 && sda->number % 2 == 0 && scl->number / 2 == sda->number / 2) { + size_t instance = (scl->number / 2) % 2; + self->peripheral = i2c[instance]; + } + if (self->peripheral == NULL) { + mp_raise_ValueError(translate("Invalid pins")); + } + if ((i2c_get_hw(self->peripheral)->enable & I2C_IC_ENABLE_ENABLE_BITS) != 0) { + mp_raise_ValueError(translate("I2C peripheral in use")); + } + if (frequency > 1000000) { + mp_raise_ValueError(translate("Unsupported baudrate")); + } + +#if CIRCUITPY_REQUIRE_I2C_PULLUPS + // Test that the pins are in a high state. (Hopefully indicating they are pulled up.) + gpio_set_function(sda->number, GPIO_FUNC_SIO); + gpio_set_function(scl->number, GPIO_FUNC_SIO); + gpio_set_dir(sda->number, GPIO_IN); + gpio_set_dir(scl->number, GPIO_IN); + + gpio_set_pulls(sda->number, false, true); + gpio_set_pulls(scl->number, false, true); + + common_hal_mcu_delay_us(10); + + gpio_set_pulls(sda->number, false, false); + gpio_set_pulls(scl->number, false, false); + + // We must pull up within 3us to achieve 400khz. + common_hal_mcu_delay_us(3); + + if (!gpio_get(sda->number) || !gpio_get(scl->number)) { + reset_pin_number(sda->number); + reset_pin_number(scl->number); + mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + } +#endif + + gpio_set_function(sda->number, GPIO_FUNC_I2C); + gpio_set_function(scl->number, GPIO_FUNC_I2C); + + self->baudrate = i2c_init(self->peripheral, frequency); + + self->sda_pin = sda->number; + self->scl_pin = scl->number; + claim_pin(sda); + claim_pin(scl); +} + +bool common_hal_busio_i2c_deinited(busio_i2c_obj_t *self) { + return self->sda_pin == NO_PIN; +} + +void common_hal_busio_i2c_deinit(busio_i2c_obj_t *self) { + if (common_hal_busio_i2c_deinited(self)) { + return; + } + never_reset_i2c[i2c_hw_index(self->peripheral)] = false; + + i2c_deinit(self->peripheral); + + reset_pin_number(self->sda_pin); + reset_pin_number(self->scl_pin); + self->sda_pin = NO_PIN; + self->scl_pin = NO_PIN; +} + +bool common_hal_busio_i2c_probe(busio_i2c_obj_t *self, uint8_t addr) { + uint8_t fake_read = 0; + return i2c_read_blocking(self->peripheral, addr, &fake_read, 1, false) != PICO_ERROR_GENERIC; +} + +bool common_hal_busio_i2c_try_lock(busio_i2c_obj_t *self) { + bool grabbed_lock = false; + if (!self->has_lock) { + grabbed_lock = true; + self->has_lock = true; + } + return grabbed_lock; +} + +bool common_hal_busio_i2c_has_lock(busio_i2c_obj_t *self) { + return self->has_lock; +} + +void common_hal_busio_i2c_unlock(busio_i2c_obj_t *self) { + self->has_lock = false; +} + +uint8_t common_hal_busio_i2c_write(busio_i2c_obj_t *self, uint16_t addr, + const uint8_t *data, size_t len, bool transmit_stop_bit) { + int result = i2c_write_blocking(self->peripheral, addr, data, len, !transmit_stop_bit); + if (result == len) { + return 0; + } else if (result == PICO_ERROR_GENERIC) { + return MP_ENODEV; + } + return MP_EIO; +} + +uint8_t common_hal_busio_i2c_read(busio_i2c_obj_t *self, uint16_t addr, + uint8_t *data, size_t len) { + int result = i2c_read_blocking(self->peripheral, addr, data, len, false); + if (result == len) { + return 0; + } else if (result == PICO_ERROR_GENERIC) { + return MP_ENODEV; + } + return MP_EIO; +} + +void common_hal_busio_i2c_never_reset(busio_i2c_obj_t *self) { + never_reset_i2c[i2c_hw_index(self->peripheral)] = true; + + never_reset_pin_number(self->scl_pin); + never_reset_pin_number(self->sda_pin); +} diff --git a/ports/raspberrypi/common-hal/busio/I2C.h b/ports/raspberrypi/common-hal/busio/I2C.h new file mode 100644 index 0000000000..d09f29e54c --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/I2C.h @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_I2C_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_I2C_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +#include "src/rp2_common/hardware_i2c/include/hardware/i2c.h" + +typedef struct { + mp_obj_base_t base; + i2c_inst_t * peripheral; + bool has_lock; + uint baudrate; + uint8_t scl_pin; + uint8_t sda_pin; +} busio_i2c_obj_t; + +void reset_i2c(void); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_I2C_H diff --git a/ports/raspberrypi/common-hal/busio/OneWire.h b/ports/raspberrypi/common-hal/busio/OneWire.h new file mode 100644 index 0000000000..e27723ab2c --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/OneWire.h @@ -0,0 +1,33 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_ONEWIRE_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_ONEWIRE_H + +// Use bitbangio. +#include "shared-module/busio/OneWire.h" + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_ONEWIRE_H diff --git a/ports/raspberrypi/common-hal/busio/SPI.c b/ports/raspberrypi/common-hal/busio/SPI.c new file mode 100644 index 0000000000..b157ae3eb0 --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/SPI.c @@ -0,0 +1,294 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/busio/SPI.h" + +#include "lib/utils/interrupt_char.h" +#include "py/mperrno.h" +#include "py/runtime.h" + +#include "supervisor/board.h" +#include "common-hal/microcontroller/Pin.h" +#include "supervisor/shared/rgb_led_status.h" +#include "shared-bindings/microcontroller/Pin.h" + +#include "src/rp2_common/hardware_dma/include/hardware/dma.h" +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" + +#define NO_INSTANCE 0xff + +STATIC bool never_reset_spi[2]; +STATIC spi_inst_t* spi[2] = {spi0, spi1}; + +void reset_spi(void) { + for (size_t i = 0; i < 2; i++) { + if (never_reset_spi[i]) { + continue; + } + + spi_deinit(spi[i]); + } +} + +void common_hal_busio_spi_construct(busio_spi_obj_t *self, + const mcu_pin_obj_t * clock, const mcu_pin_obj_t * mosi, + const mcu_pin_obj_t * miso) { + size_t instance_index = NO_INSTANCE; + if (clock->number % 4 == 2) { + instance_index = (clock->number / 8) % 2; + } + if (mosi != NULL) { + // Make sure the set MOSI matches the clock settings. + if (mosi->number % 4 != 3 || + (mosi->number / 8) % 2 != instance_index) { + instance_index = NO_INSTANCE; + } + } + if (miso != NULL) { + // Make sure the set MOSI matches the clock settings. + if (miso->number % 4 != 0 || + (miso->number / 8) % 2 != instance_index) { + instance_index = NO_INSTANCE; + } + } + + // TODO: Check to see if we're sharing the SPI with a native APA102. + + if (instance_index > 1) { + mp_raise_ValueError(translate("Invalid pins")); + } + + if (instance_index == 0) { + self->peripheral = spi0; + } else if (instance_index == 1) { + self->peripheral = spi1; + } + + if ((spi_get_hw(self->peripheral)->cr1 & SPI_SSPCR1_SSE_BITS) != 0) { + mp_raise_ValueError(translate("SPI peripheral in use")); + } + + spi_init(self->peripheral, 250000); + + gpio_set_function(clock->number, GPIO_FUNC_SPI); + claim_pin(clock); + self->clock = clock; + + self->MOSI = mosi; + if (mosi != NULL) { + gpio_set_function(mosi->number, GPIO_FUNC_SPI); + claim_pin(mosi); + } + + self->MISO = miso; + if (miso != NULL) { + gpio_set_function(miso->number, GPIO_FUNC_SPI); + claim_pin(miso); + } +} + +void common_hal_busio_spi_never_reset(busio_spi_obj_t *self) { + never_reset_spi[spi_get_index(self->peripheral)] = true; + + common_hal_never_reset_pin(self->clock); + common_hal_never_reset_pin(self->MOSI); + common_hal_never_reset_pin(self->MISO); +} + +bool common_hal_busio_spi_deinited(busio_spi_obj_t *self) { + return self->clock == NULL; +} + +void common_hal_busio_spi_deinit(busio_spi_obj_t *self) { + if (common_hal_busio_spi_deinited(self)) { + return; + } + never_reset_spi[spi_get_index(self->peripheral)] = false; + spi_deinit(self->peripheral); + + common_hal_reset_pin(self->clock); + common_hal_reset_pin(self->MOSI); + common_hal_reset_pin(self->MISO); + self->clock = NULL; +} + +bool common_hal_busio_spi_configure(busio_spi_obj_t *self, + uint32_t baudrate, uint8_t polarity, uint8_t phase, uint8_t bits) { + if (baudrate == self->target_frequency && + polarity == self->polarity && + phase == self->phase && + bits == self->bits) { + return true; + } + + spi_set_format(self->peripheral, bits, polarity, phase, SPI_MSB_FIRST); + + self->polarity = polarity; + self->phase = phase; + self->bits = bits; + self->target_frequency = baudrate; + self->real_frequency = spi_set_baudrate(self->peripheral, baudrate); + + return true; +} + +bool common_hal_busio_spi_try_lock(busio_spi_obj_t *self) { + bool grabbed_lock = false; + if (!self->has_lock) { + grabbed_lock = true; + self->has_lock = true; + } + return grabbed_lock; +} + +bool common_hal_busio_spi_has_lock(busio_spi_obj_t *self) { + return self->has_lock; +} + +void common_hal_busio_spi_unlock(busio_spi_obj_t *self) { + self->has_lock = false; +} + +static bool _transfer(busio_spi_obj_t *self, + const uint8_t *data_out, size_t out_len, + uint8_t *data_in, size_t in_len) { + // Use DMA for large transfers if channels are available + const size_t dma_min_size_threshold = 32; + int chan_tx = -1; + int chan_rx = -1; + size_t len = MAX(out_len, in_len); + if (len >= dma_min_size_threshold) { + // Use two DMA channels to service the two FIFOs + chan_tx = dma_claim_unused_channel(false); + chan_rx = dma_claim_unused_channel(false); + } + bool use_dma = chan_rx >= 0 && chan_tx >= 0; + if (use_dma) { + dma_channel_config c = dma_channel_get_default_config(chan_tx); + channel_config_set_transfer_data_size(&c, DMA_SIZE_8); + channel_config_set_dreq(&c, spi_get_index(self->peripheral) ? DREQ_SPI1_TX : DREQ_SPI0_TX); + channel_config_set_read_increment(&c, out_len == len); + channel_config_set_write_increment(&c, false); + dma_channel_configure(chan_tx, &c, + &spi_get_hw(self->peripheral)->dr, + data_out, + len, + false); + + c = dma_channel_get_default_config(chan_rx); + channel_config_set_transfer_data_size(&c, DMA_SIZE_8); + channel_config_set_dreq(&c, spi_get_index(self->peripheral) ? DREQ_SPI1_RX : DREQ_SPI0_RX); + channel_config_set_read_increment(&c, false); + channel_config_set_write_increment(&c, in_len == len); + dma_channel_configure(chan_rx, &c, + data_in, + &spi_get_hw(self->peripheral)->dr, + len, + false); + + dma_start_channel_mask((1u << chan_rx) | (1u << chan_tx)); + while (dma_channel_is_busy(chan_rx) || dma_channel_is_busy(chan_tx)) { + // TODO: We should idle here until we get a DMA interrupt or something else. + RUN_BACKGROUND_TASKS; + if (mp_hal_is_interrupted()) { + if (dma_channel_is_busy(chan_rx)) { + dma_channel_abort(chan_rx); + } + if (dma_channel_is_busy(chan_tx)) { + dma_channel_abort(chan_tx); + } + break; + } + } + } + + // If we have claimed only one channel successfully, we should release immediately. This also + // releases the DMA after use_dma has been done. + if (chan_rx >= 0) { + dma_channel_unclaim(chan_rx); + } + if (chan_tx >= 0) { + dma_channel_unclaim(chan_tx); + } + + if (!use_dma && !mp_hal_is_interrupted()) { + // Use software for small transfers, or if couldn't claim two DMA channels + // Never have more transfers in flight than will fit into the RX FIFO, + // else FIFO will overflow if this code is heavily interrupted. + const size_t fifo_depth = 8; + size_t rx_remaining = len; + size_t tx_remaining = len; + + while (!mp_hal_is_interrupted() && (rx_remaining || tx_remaining)) { + if (tx_remaining && spi_is_writable(self->peripheral) && rx_remaining - tx_remaining < fifo_depth) { + spi_get_hw(self->peripheral)->dr = (uint32_t) *data_out; + // Increment only if the buffer is the transfer length. It's 1 otherwise. + if (out_len == len) { + data_out++; + } + --tx_remaining; + } + if (rx_remaining && spi_is_readable(self->peripheral)) { + *data_in = (uint8_t) spi_get_hw(self->peripheral)->dr; + // Increment only if the buffer is the transfer length. It's 1 otherwise. + if (in_len == len) { + data_in++; + } + --rx_remaining; + } + RUN_BACKGROUND_TASKS; + } + } + return true; +} + +bool common_hal_busio_spi_write(busio_spi_obj_t *self, + const uint8_t *data, size_t len) { + uint32_t data_in; + return _transfer(self, data, len, (uint8_t*) &data_in, MIN(len, 4)); +} + +bool common_hal_busio_spi_read(busio_spi_obj_t *self, + uint8_t *data, size_t len, uint8_t write_value) { + uint32_t data_out = write_value << 24 | write_value << 16 | write_value << 8 | write_value; + return _transfer(self, (const uint8_t*) &data_out, MIN(4, len), data, len); +} + +bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, const uint8_t *data_out, uint8_t *data_in, size_t len) { + return _transfer(self, data_out, len, data_in, len); +} + +uint32_t common_hal_busio_spi_get_frequency(busio_spi_obj_t* self) { + return self->real_frequency; +} + +uint8_t common_hal_busio_spi_get_phase(busio_spi_obj_t* self) { + return self->phase; +} + +uint8_t common_hal_busio_spi_get_polarity(busio_spi_obj_t* self) { + return self->polarity; +} diff --git a/ports/raspberrypi/common-hal/busio/SPI.h b/ports/raspberrypi/common-hal/busio/SPI.h new file mode 100644 index 0000000000..981db46d41 --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/SPI.h @@ -0,0 +1,52 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_SPI_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_SPI_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +#include "src/rp2_common/hardware_spi/include/hardware/spi.h" + +typedef struct { + mp_obj_base_t base; + spi_inst_t * peripheral; + bool has_lock; + const mcu_pin_obj_t* clock; + const mcu_pin_obj_t* MOSI; + const mcu_pin_obj_t* MISO; + uint32_t target_frequency; + int32_t real_frequency; + uint8_t polarity; + uint8_t phase; + uint8_t bits; +} busio_spi_obj_t; + +void reset_spi(void); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_SPI_H diff --git a/ports/raspberrypi/common-hal/busio/UART.c b/ports/raspberrypi/common-hal/busio/UART.c new file mode 100644 index 0000000000..f9a75b4996 --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/UART.c @@ -0,0 +1,404 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/busio/UART.h" + +#include "mpconfigport.h" +#include "lib/utils/interrupt_char.h" +#include "py/gc.h" +#include "py/mperrno.h" +#include "py/runtime.h" +#include "py/stream.h" +#include "supervisor/shared/translate.h" +#include "supervisor/shared/tick.h" + +#define UART_DEBUG(...) (void)0 +// #define UART_DEBUG(...) mp_printf(&mp_plat_print __VA_OPT__(,) __VA_ARGS__) + +// Do-nothing callback needed so that usart_async code will enable rx interrupts. +// See comment below re usart_async_register_callback() +// static void usart_async_rxc_callback(const struct usart_async_descriptor *const descr) { +// // Nothing needs to be done by us. +// } + +#define NO_PIN 0xff + +void common_hal_busio_uart_construct(busio_uart_obj_t *self, + const mcu_pin_obj_t * tx, const mcu_pin_obj_t * rx, + const mcu_pin_obj_t * rts, const mcu_pin_obj_t * cts, + const mcu_pin_obj_t * rs485_dir, bool rs485_invert, + uint32_t baudrate, uint8_t bits, busio_uart_parity_t parity, uint8_t stop, + mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer, + bool sigint_enabled) { + mp_raise_NotImplementedError(translate("UART not yet supported")); + +// Sercom* sercom = NULL; +// uint8_t sercom_index = 255; // Unset index +// uint32_t rx_pinmux = 0; +// uint8_t rx_pad = 255; // Unset pad +// uint32_t tx_pinmux = 0; +// uint8_t tx_pad = 255; // Unset pad + +// if ((rts != NULL) || (cts != NULL) || (rs485_dir != NULL) || (rs485_invert)) { +// mp_raise_ValueError(translate("RTS/CTS/RS485 Not yet supported on this device")); +// } + +// if (bits > 8) { +// mp_raise_NotImplementedError(translate("bytes > 8 bits not supported")); +// } + +// bool have_tx = tx != NULL; +// bool have_rx = rx != NULL; +// if (!have_tx && !have_rx) { +// mp_raise_ValueError(translate("tx and rx cannot both be None")); +// } + +// self->baudrate = baudrate; +// self->character_bits = bits; +// self->timeout_ms = timeout * 1000; + +// // This assignment is only here because the usart_async routines take a *const argument. +// struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + +// for (int i = 0; i < NUM_SERCOMS_PER_PIN; i++) { +// Sercom* potential_sercom = NULL; +// if (have_tx) { +// sercom_index = tx->sercom[i].index; +// if (sercom_index >= SERCOM_INST_NUM) { +// continue; +// } +// potential_sercom = sercom_insts[sercom_index]; +// #ifdef SAMD21 +// if (potential_sercom->USART.CTRLA.bit.ENABLE != 0 || +// !(tx->sercom[i].pad == 0 || +// tx->sercom[i].pad == 2)) { +// continue; +// } +// #endif +// #ifdef SAM_D5X_E5X +// if (potential_sercom->USART.CTRLA.bit.ENABLE != 0 || +// !(tx->sercom[i].pad == 0)) { +// continue; +// } +// #endif +// tx_pinmux = PINMUX(tx->number, (i == 0) ? MUX_C : MUX_D); +// tx_pad = tx->sercom[i].pad; +// if (rx == NULL) { +// sercom = potential_sercom; +// break; +// } +// } +// for (int j = 0; j < NUM_SERCOMS_PER_PIN; j++) { +// if (((!have_tx && rx->sercom[j].index < SERCOM_INST_NUM && +// sercom_insts[rx->sercom[j].index]->USART.CTRLA.bit.ENABLE == 0) || +// sercom_index == rx->sercom[j].index) && +// rx->sercom[j].pad != tx_pad) { +// rx_pinmux = PINMUX(rx->number, (j == 0) ? MUX_C : MUX_D); +// rx_pad = rx->sercom[j].pad; +// sercom = sercom_insts[rx->sercom[j].index]; +// sercom_index = rx->sercom[j].index; +// break; +// } +// } +// if (sercom != NULL) { +// break; +// } +// } +// if (sercom == NULL) { +// mp_raise_ValueError(translate("Invalid pins")); +// } +// if (!have_tx) { +// tx_pad = 0; +// if (rx_pad == 0) { +// tx_pad = 2; +// } +// } +// if (!have_rx) { +// rx_pad = (tx_pad + 1) % 4; +// } + +// // Set up clocks on SERCOM. +// samd_peripherals_sercom_clock_init(sercom, sercom_index); + +// if (rx && receiver_buffer_size > 0) { +// self->buffer_length = receiver_buffer_size; +// // Initially allocate the UART's buffer in the long-lived part of the +// // heap. UARTs are generally long-lived objects, but the "make long- +// // lived" machinery is incapable of moving internal pointers like +// // self->buffer, so do it manually. (However, as long as internal +// // pointers like this are NOT moved, allocating the buffer +// // in the long-lived pool is not strictly necessary) +// self->buffer = (uint8_t *) gc_alloc(self->buffer_length * sizeof(uint8_t), false, true); +// if (self->buffer == NULL) { +// common_hal_busio_uart_deinit(self); +// mp_raise_msg_varg(&mp_type_MemoryError, translate("Failed to allocate RX buffer of %d bytes"), self->buffer_length * sizeof(uint8_t)); +// } +// } else { +// self->buffer_length = 0; +// self->buffer = NULL; +// } + +// if (usart_async_init(usart_desc_p, sercom, self->buffer, self->buffer_length, NULL) != ERR_NONE) { +// mp_raise_ValueError(translate("Could not initialize UART")); +// } + +// // usart_async_init() sets a number of defaults based on a prototypical SERCOM +// // which don't necessarily match what we need. After calling it, set the values +// // specific to this instantiation of UART. + +// // Set pads computed for this SERCOM. +// // TXPO: +// // 0x0: TX pad 0; no RTS/CTS +// // 0x1: TX pad 2; no RTS/CTS +// // 0x2: TX pad 0; RTS: pad 2, CTS: pad 3 (not used by us right now) +// // So divide by 2 to map pad to value. +// // RXPO: +// // 0x0: RX pad 0 +// // 0x1: RX pad 1 +// // 0x2: RX pad 2 +// // 0x3: RX pad 3 + +// // Doing a group mask and set of the registers saves 60 bytes over setting the bitfields individually. + +// sercom->USART.CTRLA.reg &= ~(SERCOM_USART_CTRLA_TXPO_Msk | +// SERCOM_USART_CTRLA_RXPO_Msk | +// SERCOM_USART_CTRLA_FORM_Msk); +// sercom->USART.CTRLA.reg |= SERCOM_USART_CTRLA_TXPO(tx_pad / 2) | +// SERCOM_USART_CTRLA_RXPO(rx_pad) | +// (parity == BUSIO_UART_PARITY_NONE ? 0 : SERCOM_USART_CTRLA_FORM(1)); + +// // Enable tx and/or rx based on whether the pins were specified. +// // CHSIZE is 0 for 8 bits, 5, 6, 7 for 5, 6, 7 bits. 1 for 9 bits, but we don't support that. +// sercom->USART.CTRLB.reg &= ~(SERCOM_USART_CTRLB_TXEN | +// SERCOM_USART_CTRLB_RXEN | +// SERCOM_USART_CTRLB_PMODE | +// SERCOM_USART_CTRLB_SBMODE | +// SERCOM_USART_CTRLB_CHSIZE_Msk); +// sercom->USART.CTRLB.reg |= (have_tx ? SERCOM_USART_CTRLB_TXEN : 0) | +// (have_rx ? SERCOM_USART_CTRLB_RXEN : 0) | +// (parity == BUSIO_UART_PARITY_ODD ? SERCOM_USART_CTRLB_PMODE : 0) | +// (stop > 1 ? SERCOM_USART_CTRLB_SBMODE : 0) | +// SERCOM_USART_CTRLB_CHSIZE(bits % 8); + +// // Set baud rate +// common_hal_busio_uart_set_baudrate(self, baudrate); + +// // Turn on rx interrupt handling. The UART async driver has its own set of internal callbacks, +// // which are set up by uart_async_init(). These in turn can call user-specified callbacks. +// // In fact, the actual interrupts are not enabled unless we set up a user-specified callback. +// // This is confusing. It's explained in the Atmel START User Guide -> Implementation Description -> +// // Different read function behavior in some asynchronous drivers. As of this writing: +// // http://start.atmel.com/static/help/index.html?GUID-79201A5A-226F-4FBB-B0B8-AB0BE0554836 +// // Look at the ASFv4 code example for async USART. +// usart_async_register_callback(usart_desc_p, USART_ASYNC_RXC_CB, usart_async_rxc_callback); + + +// if (have_tx) { +// gpio_set_pin_direction(tx->number, GPIO_DIRECTION_OUT); +// gpio_set_pin_pull_mode(tx->number, GPIO_PULL_OFF); +// gpio_set_pin_function(tx->number, tx_pinmux); +// self->tx_pin = tx->number; +// claim_pin(tx); +// } else { +// self->tx_pin = NO_PIN; +// } + +// if (have_rx) { +// gpio_set_pin_direction(rx->number, GPIO_DIRECTION_IN); +// gpio_set_pin_pull_mode(rx->number, GPIO_PULL_OFF); +// gpio_set_pin_function(rx->number, rx_pinmux); +// self->rx_pin = rx->number; +// claim_pin(rx); +// } else { +// self->rx_pin = NO_PIN; +// } + +// usart_async_enable(usart_desc_p); +} + +bool common_hal_busio_uart_deinited(busio_uart_obj_t *self) { + return self->rx_pin == NO_PIN && self->tx_pin == NO_PIN; +} + +void common_hal_busio_uart_deinit(busio_uart_obj_t *self) { + if (common_hal_busio_uart_deinited(self)) { + return; + } + // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + // usart_async_disable(usart_desc_p); + // usart_async_deinit(usart_desc_p); + reset_pin_number(self->rx_pin); + reset_pin_number(self->tx_pin); + self->rx_pin = NO_PIN; + self->tx_pin = NO_PIN; +} + +// Read characters. +size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) { + if (self->rx_pin == NO_PIN) { + mp_raise_ValueError(translate("No RX pin")); + } + + // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + + if (len == 0) { + // Nothing to read. + return 0; + } + + // struct io_descriptor *io; + // usart_async_get_io_descriptor(usart_desc_p, &io); + + size_t total_read = 0; + // uint64_t start_ticks = supervisor_ticks_ms64(); + + // // Busy-wait until timeout or until we've read enough chars. + // while (supervisor_ticks_ms64() - start_ticks <= self->timeout_ms) { + // // Read as many chars as we can right now, up to len. + // size_t num_read = io_read(io, data, len); + + // // Advance pointer in data buffer, and decrease how many chars left to read. + // data += num_read; + // len -= num_read; + // total_read += num_read; + // if (len == 0) { + // // Don't need to read any more: data buf is full. + // break; + // } + // if (num_read > 0) { + // // Reset the timeout on every character read. + // start_ticks = supervisor_ticks_ms64(); + // } + // RUN_BACKGROUND_TASKS; + // // Allow user to break out of a timeout with a KeyboardInterrupt. + // if (mp_hal_is_interrupted()) { + // break; + // } + // // If we are zero timeout, make sure we don't loop again (in the event + // // we read in under 1ms) + // if (self->timeout_ms == 0) { + // break; + // } + // } + + // if (total_read == 0) { + // *errcode = EAGAIN; + // return MP_STREAM_ERROR; + // } + + return total_read; +} + +// Write characters. +size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) { + if (self->tx_pin == NO_PIN) { + mp_raise_ValueError(translate("No TX pin")); + } + + // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + + // struct io_descriptor *io; + // usart_async_get_io_descriptor(usart_desc_p, &io); + + // // Start writing characters. This is non-blocking and will + // // return immediately after setting up the write. + // if (io_write(io, data, len) < 0) { + // *errcode = MP_EAGAIN; + // return MP_STREAM_ERROR; + // } + + // // Busy-wait until all characters transmitted. + // struct usart_async_status async_status; + // while (true) { + // usart_async_get_status(usart_desc_p, &async_status); + // if (async_status.txcnt >= len) { + // break; + // } + // RUN_BACKGROUND_TASKS; + // } + + return len; +} + +uint32_t common_hal_busio_uart_get_baudrate(busio_uart_obj_t *self) { + return self->baudrate; +} + +void common_hal_busio_uart_set_baudrate(busio_uart_obj_t *self, uint32_t baudrate) { + // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + // usart_async_set_baud_rate(usart_desc_p, + // // Samples and ARITHMETIC vs FRACTIONAL must correspond to USART_SAMPR in + // // hpl_sercom_config.h. + // _usart_async_calculate_baud_rate(baudrate, // e.g. 9600 baud + // PROTOTYPE_SERCOM_USART_ASYNC_CLOCK_FREQUENCY, + // 16, // samples + // USART_BAUDRATE_ASYNCH_ARITHMETIC, + // 0 // fraction - not used for ARITHMETIC + // )); + self->baudrate = baudrate; +} + +mp_float_t common_hal_busio_uart_get_timeout(busio_uart_obj_t *self) { + return (mp_float_t) (self->timeout_ms / 1000.0f); +} + +void common_hal_busio_uart_set_timeout(busio_uart_obj_t *self, mp_float_t timeout) { + self->timeout_ms = timeout * 1000; +} + +uint32_t common_hal_busio_uart_rx_characters_available(busio_uart_obj_t *self) { + // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + // struct usart_async_status async_status; + // usart_async_get_status(usart_desc_p, &async_status); + // return async_status.rxcnt; + return 0; +} + +void common_hal_busio_uart_clear_rx_buffer(busio_uart_obj_t *self) { + // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + // usart_async_flush_rx_buffer(usart_desc_p); + +} + +// True if there are no characters still to be written. +bool common_hal_busio_uart_ready_to_tx(busio_uart_obj_t *self) { + if (self->tx_pin == NO_PIN) { + return false; + } + return false; + // // This assignment is only here because the usart_async routines take a *const argument. + // struct usart_async_descriptor * const usart_desc_p = (struct usart_async_descriptor * const) &self->usart_desc; + // struct usart_async_status async_status; + // usart_async_get_status(usart_desc_p, &async_status); + // return !(async_status.flags & USART_ASYNC_STATUS_BUSY); +} diff --git a/ports/raspberrypi/common-hal/busio/UART.h b/ports/raspberrypi/common-hal/busio/UART.h new file mode 100644 index 0000000000..43ed9bee01 --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/UART.h @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_UART_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_UART_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + // struct usart_async_descriptor usart_desc; + uint8_t rx_pin; + uint8_t tx_pin; + uint8_t character_bits; + bool rx_error; + uint32_t baudrate; + uint32_t timeout_ms; + uint32_t buffer_length; + uint8_t* buffer; +} busio_uart_obj_t; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_BUSIO_UART_H diff --git a/ports/raspberrypi/common-hal/busio/__init__.c b/ports/raspberrypi/common-hal/busio/__init__.c new file mode 100644 index 0000000000..41761b6743 --- /dev/null +++ b/ports/raspberrypi/common-hal/busio/__init__.c @@ -0,0 +1 @@ +// No busio module functions. diff --git a/ports/raspberrypi/common-hal/digitalio/DigitalInOut.c b/ports/raspberrypi/common-hal/digitalio/DigitalInOut.c new file mode 100644 index 0000000000..b0bc1b96e8 --- /dev/null +++ b/ports/raspberrypi/common-hal/digitalio/DigitalInOut.c @@ -0,0 +1,154 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include +#include + +#include "py/runtime.h" +#include "py/mphal.h" + +#include "common-hal/microcontroller/Pin.h" +#include "shared-bindings/digitalio/DigitalInOut.h" +#include "supervisor/shared/translate.h" + +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" + +digitalinout_result_t common_hal_digitalio_digitalinout_construct( + digitalio_digitalinout_obj_t* self, const mcu_pin_obj_t* pin) { + claim_pin(pin); + self->pin = pin; + self->output = false; + self->open_drain = false; + + gpio_init(pin->number); + return DIGITALINOUT_OK; +} + +void common_hal_digitalio_digitalinout_never_reset( + digitalio_digitalinout_obj_t *self) { + never_reset_pin_number(self->pin->number); +} + +bool common_hal_digitalio_digitalinout_deinited(digitalio_digitalinout_obj_t* self) { + return self->pin == NULL; +} + +void common_hal_digitalio_digitalinout_deinit(digitalio_digitalinout_obj_t* self) { + if (common_hal_digitalio_digitalinout_deinited(self)) { + return; + } + reset_pin_number(self->pin->number); + self->pin = NULL; +} + +void common_hal_digitalio_digitalinout_switch_to_input( + digitalio_digitalinout_obj_t* self, digitalio_pull_t pull) { + self->output = false; + // This also sets direction to input. + common_hal_digitalio_digitalinout_set_pull(self, pull); +} + +digitalinout_result_t common_hal_digitalio_digitalinout_switch_to_output( + digitalio_digitalinout_obj_t* self, bool value, + digitalio_drive_mode_t drive_mode) { + const uint8_t pin = self->pin->number; + gpio_set_dir(pin, GPIO_OUT); + // TODO: Turn on "strong" pin driving (more current available). + + self->output = true; + common_hal_digitalio_digitalinout_set_drive_mode(self, drive_mode); + common_hal_digitalio_digitalinout_set_value(self, value); + return DIGITALINOUT_OK; +} + +digitalio_direction_t common_hal_digitalio_digitalinout_get_direction( + digitalio_digitalinout_obj_t* self) { + return self->output ? DIRECTION_OUTPUT : DIRECTION_INPUT; +} + +void common_hal_digitalio_digitalinout_set_value( + digitalio_digitalinout_obj_t* self, bool value) { + const uint8_t pin = self->pin->number; + if (self->open_drain) { + gpio_set_dir(pin, value ? GPIO_IN : GPIO_OUT); + } else { + gpio_put(pin, value); + } +} + +bool common_hal_digitalio_digitalinout_get_value( + digitalio_digitalinout_obj_t* self) { + return gpio_get(self->pin->number); +} + +digitalinout_result_t common_hal_digitalio_digitalinout_set_drive_mode( + digitalio_digitalinout_obj_t* self, + digitalio_drive_mode_t drive_mode) { + const uint8_t pin = self->pin->number; + bool value = common_hal_digitalio_digitalinout_get_value(self); + self->open_drain = drive_mode == DRIVE_MODE_OPEN_DRAIN; + if (self->open_drain) { + gpio_put(pin, false); + } + // True is implemented differently between modes so reset the value to make + // sure it's correct for the new mode. + if (value) { + common_hal_digitalio_digitalinout_set_value(self, value); + } + return DIGITALINOUT_OK; +} + +digitalio_drive_mode_t common_hal_digitalio_digitalinout_get_drive_mode( + digitalio_digitalinout_obj_t* self) { + if (self->open_drain) { + return DRIVE_MODE_OPEN_DRAIN; + } else { + return DRIVE_MODE_PUSH_PULL; + } +} + +void common_hal_digitalio_digitalinout_set_pull( + digitalio_digitalinout_obj_t* self, digitalio_pull_t pull) { + const uint8_t pin = self->pin->number; + gpio_set_pulls(pin, pull == PULL_UP, pull == PULL_DOWN); + gpio_set_dir(pin, GPIO_IN); +} + +digitalio_pull_t common_hal_digitalio_digitalinout_get_pull( + digitalio_digitalinout_obj_t* self) { + uint32_t pin = self->pin->number; + if (self->output) { + mp_raise_AttributeError(translate("Cannot get pull while in output mode")); + return PULL_NONE; + } else { + if (gpio_is_pulled_up(pin)) { + return PULL_UP; + } else if (gpio_is_pulled_down(pin)) { + return PULL_DOWN; + } + } + return PULL_NONE; +} diff --git a/ports/raspberrypi/common-hal/digitalio/DigitalInOut.h b/ports/raspberrypi/common-hal/digitalio/DigitalInOut.h new file mode 100644 index 0000000000..8b14bbad8f --- /dev/null +++ b/ports/raspberrypi/common-hal/digitalio/DigitalInOut.h @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_DIGITALIO_DIGITALINOUT_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_DIGITALIO_DIGITALINOUT_H + +#include "common-hal/microcontroller/Pin.h" +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + const mcu_pin_obj_t * pin; + bool output; + bool open_drain; +} digitalio_digitalinout_obj_t; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_DIGITALIO_DIGITALINOUT_H diff --git a/ports/raspberrypi/common-hal/digitalio/__init__.c b/ports/raspberrypi/common-hal/digitalio/__init__.c new file mode 100644 index 0000000000..20fad45959 --- /dev/null +++ b/ports/raspberrypi/common-hal/digitalio/__init__.c @@ -0,0 +1 @@ +// No digitalio module functions. diff --git a/ports/raspberrypi/common-hal/displayio/ParallelBus.c b/ports/raspberrypi/common-hal/displayio/ParallelBus.c new file mode 100644 index 0000000000..57b2ffc36b --- /dev/null +++ b/ports/raspberrypi/common-hal/displayio/ParallelBus.c @@ -0,0 +1,68 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/displayio/ParallelBus.h" + +#include + +#include "common-hal/microcontroller/Pin.h" +#include "py/runtime.h" +#include "shared-bindings/digitalio/DigitalInOut.h" +#include "shared-bindings/microcontroller/__init__.h" + +void common_hal_displayio_parallelbus_construct(displayio_parallelbus_obj_t* self, + const mcu_pin_obj_t* data0, const mcu_pin_obj_t* command, const mcu_pin_obj_t* chip_select, + const mcu_pin_obj_t* write, const mcu_pin_obj_t* read, const mcu_pin_obj_t* reset) { + + mp_raise_NotImplementedError(translate("ParallelBus not yet supported")); + // TODO: Implement with PIO and DMA. +} + +void common_hal_displayio_parallelbus_deinit(displayio_parallelbus_obj_t* self) { + +} + +bool common_hal_displayio_parallelbus_reset(mp_obj_t obj) { + return false; +} + +bool common_hal_displayio_parallelbus_bus_free(mp_obj_t obj) { + return false; +} + +bool common_hal_displayio_parallelbus_begin_transaction(mp_obj_t obj) { + + return false; +} + +void common_hal_displayio_parallelbus_send(mp_obj_t obj, display_byte_type_t byte_type, + display_chip_select_behavior_t chip_select, const uint8_t *data, uint32_t data_length) { + +} + +void common_hal_displayio_parallelbus_end_transaction(mp_obj_t obj) { + +} diff --git a/ports/raspberrypi/common-hal/displayio/ParallelBus.h b/ports/raspberrypi/common-hal/displayio/ParallelBus.h new file mode 100644 index 0000000000..45989d9900 --- /dev/null +++ b/ports/raspberrypi/common-hal/displayio/ParallelBus.h @@ -0,0 +1,36 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_DISPLAYIO_PARALLELBUS_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_DISPLAYIO_PARALLELBUS_H + +#include "common-hal/digitalio/DigitalInOut.h" + +typedef struct { + mp_obj_base_t base; +} displayio_parallelbus_obj_t; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_DISPLAYIO_PARALLELBUS_H diff --git a/ports/raspberrypi/common-hal/microcontroller/Pin.c b/ports/raspberrypi/common-hal/microcontroller/Pin.c new file mode 100644 index 0000000000..ca5cf5a045 --- /dev/null +++ b/ports/raspberrypi/common-hal/microcontroller/Pin.c @@ -0,0 +1,181 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/runtime.h" + +#include "common-hal/microcontroller/__init__.h" +#include "shared-bindings/microcontroller/Pin.h" + +#include "supervisor/shared/rgb_led_status.h" + +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" + +#ifdef MICROPY_HW_NEOPIXEL +bool neopixel_in_use; +#endif +#ifdef MICROPY_HW_APA102_MOSI +bool apa102_sck_in_use; +bool apa102_mosi_in_use; +#endif +#ifdef SPEAKER_ENABLE_PIN +bool speaker_enable_in_use; +#endif + +STATIC uint32_t never_reset_pins; + +void reset_all_pins(void) { + for (size_t i = 0; i < TOTAL_GPIO_COUNT; i++) { + if ((never_reset_pins & (1 << i)) != 0) { + continue; + } + reset_pin_number(i); + } +} + +void never_reset_pin_number(uint8_t pin_number) { + if (pin_number >= TOTAL_GPIO_COUNT) { + return; + } + + never_reset_pins |= 1 << pin_number; +} + +void reset_pin_number(uint8_t pin_number) { + if (pin_number >= TOTAL_GPIO_COUNT) { + return; + } + + never_reset_pins &= ~(1 << pin_number); + + // We are very aggressive in shutting down the pad fully. Both pulls are + // disabled and both buffers are as well. + gpio_init(pin_number); + hw_clear_bits(&padsbank0_hw->io[pin_number], PADS_BANK0_GPIO0_IE_BITS | + PADS_BANK0_GPIO0_PUE_BITS | + PADS_BANK0_GPIO0_PDE_BITS); + hw_set_bits(&padsbank0_hw->io[pin_number], PADS_BANK0_GPIO0_OD_BITS); + + #ifdef MICROPY_HW_NEOPIXEL + if (pin_number == MICROPY_HW_NEOPIXEL->number) { + neopixel_in_use = false; + rgb_led_status_init(); + return; + } + #endif + #ifdef MICROPY_HW_APA102_MOSI + if (pin_number == MICROPY_HW_APA102_MOSI->number || + pin_number == MICROPY_HW_APA102_SCK->number) { + apa102_mosi_in_use = apa102_mosi_in_use && pin_number != MICROPY_HW_APA102_MOSI->number; + apa102_sck_in_use = apa102_sck_in_use && pin_number != MICROPY_HW_APA102_SCK->number; + if (!apa102_sck_in_use && !apa102_mosi_in_use) { + rgb_led_status_init(); + } + return; + } + #endif + + #ifdef SPEAKER_ENABLE_PIN + if (pin_number == SPEAKER_ENABLE_PIN->number) { + speaker_enable_in_use = false; + } + #endif +} + +void common_hal_never_reset_pin(const mcu_pin_obj_t* pin) { + never_reset_pin_number(pin->number); +} + +void common_hal_reset_pin(const mcu_pin_obj_t* pin) { + reset_pin_number(pin->number); +} + +void claim_pin(const mcu_pin_obj_t* pin) { + #ifdef MICROPY_HW_NEOPIXEL + if (pin == MICROPY_HW_NEOPIXEL) { + neopixel_in_use = true; + } + #endif + #ifdef MICROPY_HW_APA102_MOSI + if (pin == MICROPY_HW_APA102_MOSI) { + apa102_mosi_in_use = true; + } + if (pin == MICROPY_HW_APA102_SCK) { + apa102_sck_in_use = true; + } + #endif + + #ifdef SPEAKER_ENABLE_PIN + if (pin == SPEAKER_ENABLE_PIN) { + speaker_enable_in_use = true; + } + #endif +} + +bool pin_number_is_free(uint8_t pin_number) { + if (pin_number >= TOTAL_GPIO_COUNT) { + return false; + } + + uint32_t pad_state = padsbank0_hw->io[pin_number]; + return (pad_state & PADS_BANK0_GPIO0_IE_BITS) == 0 && + (pad_state & PADS_BANK0_GPIO0_OD_BITS) != 0; +} + +bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t* pin) { + #ifdef MICROPY_HW_NEOPIXEL + if (pin == MICROPY_HW_NEOPIXEL) { + return !neopixel_in_use; + } + #endif + #ifdef MICROPY_HW_APA102_MOSI + if (pin == MICROPY_HW_APA102_MOSI) { + return !apa102_mosi_in_use; + } + if (pin == MICROPY_HW_APA102_SCK) { + return !apa102_sck_in_use; + } + #endif + + #ifdef SPEAKER_ENABLE_PIN + if (pin == SPEAKER_ENABLE_PIN) { + return !speaker_enable_in_use; + } + #endif + + return pin_number_is_free(pin->number); +} + +uint8_t common_hal_mcu_pin_number(const mcu_pin_obj_t* pin) { + return pin->number; +} + +void common_hal_mcu_pin_claim(const mcu_pin_obj_t* pin) { + return claim_pin(pin); +} + +void common_hal_mcu_pin_reset_number(uint8_t pin_no) { + reset_pin_number(pin_no); +} diff --git a/ports/raspberrypi/common-hal/microcontroller/Pin.h b/ports/raspberrypi/common-hal/microcontroller/Pin.h new file mode 100644 index 0000000000..07c3211850 --- /dev/null +++ b/ports/raspberrypi/common-hal/microcontroller/Pin.h @@ -0,0 +1,53 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PIN_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PIN_H + +#include +#include + +#include + +#include "peripherals/pins.h" + +#ifdef MICROPY_HW_NEOPIXEL +extern bool neopixel_in_use; +#endif +#ifdef MICROPY_HW_APA102_MOSI +extern bool apa102_sck_in_use; +extern bool apa102_mosi_in_use; +#endif + +void reset_all_pins(void); +// reset_pin_number takes the pin number instead of the pointer so that objects don't +// need to store a full pointer. +void reset_pin_number(uint8_t pin_number); +void never_reset_pin_number(uint8_t pin_number); +void claim_pin(const mcu_pin_obj_t* pin); +bool pin_number_is_free(uint8_t pin_number); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PIN_H diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.c b/ports/raspberrypi/common-hal/microcontroller/Processor.c new file mode 100644 index 0000000000..0ad3a51e28 --- /dev/null +++ b/ports/raspberrypi/common-hal/microcontroller/Processor.c @@ -0,0 +1,66 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include + +#include "py/mphal.h" +#include "common-hal/microcontroller/Processor.h" +#include "shared-bindings/microcontroller/ResetReason.h" + +#include "src/rp2_common/hardware_adc/include/hardware/adc.h" +#include "src/rp2_common/hardware_clocks/include/hardware/clocks.h" + +float common_hal_mcu_processor_get_temperature(void) { + adc_init(); + adc_set_temp_sensor_enabled(true); + adc_select_input(4); + uint16_t value = adc_read(); + adc_set_temp_sensor_enabled(false); + float voltage = value * 3.3 / (1 << 12); + // TODO: turn the ADC back off + return 27 - (voltage - 0.706) / 0.001721; +} + +float common_hal_mcu_processor_get_voltage(void) { + return 3.3f; +} + +uint32_t common_hal_mcu_processor_get_frequency(void) { + return clock_get_hz(clk_sys); +} + +void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) { + // TODO: get the unique id from the flash. The chip itself doesn't have one. + // for (int i=0; i<4; i++) { + // for (int k=0; k<4; k++) { + // raw_id[4 * i + k] = (*(id_addresses[i]) >> k * 8) & 0xff; + // } + // } +} + +mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) { + return RESET_REASON_UNKNOWN; +} diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.h b/ports/raspberrypi/common-hal/microcontroller/Processor.h new file mode 100644 index 0000000000..b7c86e8506 --- /dev/null +++ b/ports/raspberrypi/common-hal/microcontroller/Processor.h @@ -0,0 +1,39 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H + +#define COMMON_HAL_MCU_PROCESSOR_UID_LENGTH 16 + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + // Stores no state currently. +} mcu_processor_obj_t; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H diff --git a/ports/raspberrypi/common-hal/microcontroller/__init__.c b/ports/raspberrypi/common-hal/microcontroller/__init__.c new file mode 100644 index 0000000000..e454ffa1b7 --- /dev/null +++ b/ports/raspberrypi/common-hal/microcontroller/__init__.c @@ -0,0 +1,148 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/mphal.h" +#include "py/obj.h" +#include "py/runtime.h" + +#include "common-hal/microcontroller/__init__.h" +#if CIRCUITPY_NVM +#include "shared-bindings/nvm/ByteArray.h" +#endif +#include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/microcontroller/Pin.h" +#include "shared-bindings/microcontroller/Processor.h" +#include "supervisor/shared/safe_mode.h" +#include "supervisor/shared/translate.h" + +#include "src/rp2040/hardware_structs/include/hardware/structs/sio.h" +#include "src/rp2_common/hardware_sync/include/hardware/sync.h" + +void common_hal_mcu_delay_us(uint32_t delay) { + mp_hal_delay_us(delay); +} + +volatile uint32_t nesting_count = 0; +void common_hal_mcu_disable_interrupts(void) { + // We don't use save_and_disable_interrupts() from the sdk because we don't want to worry about PRIMASK. + // This is what we do on the SAMD21 via CMSIS. + asm volatile ("cpsid i" : : : "memory"); + __dmb(); + nesting_count++; +} + +void common_hal_mcu_enable_interrupts(void) { + if (nesting_count == 0) { + // reset_into_safe_mode(LOCKING_ERROR); + } + nesting_count--; + if (nesting_count > 0) { + return; + } + __dmb(); + asm volatile ("cpsie i" : : : "memory"); +} + +void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) { + if (runmode == RUNMODE_BOOTLOADER) { + } else { + } + if (runmode == RUNMODE_SAFE_MODE) { + safe_mode_on_next_reset(PROGRAMMATIC_SAFE_MODE); + } +} + +void common_hal_mcu_reset(void) { +} + +// The singleton microcontroller.Processor object, bound to microcontroller.cpu +// It currently only has properties, and no state. +static const mcu_processor_obj_t processor0 = { + .base = { + .type = &mcu_processor_type, + }, +}; + +static const mcu_processor_obj_t processor1 = { + .base = { + .type = &mcu_processor_type, + }, +}; + +const mp_rom_obj_tuple_t common_hal_mcu_processor_obj = { + {&mp_type_tuple}, + CIRCUITPY_PROCESSOR_COUNT, + { + MP_ROM_PTR(&processor0), + MP_ROM_PTR(&processor1) + } +}; + +#if CIRCUITPY_NVM && CIRCUITPY_INTERNAL_NVM_SIZE > 0 +// The singleton nvm.ByteArray object. +const nvm_bytearray_obj_t common_hal_mcu_nvm_obj = { + .base = { + .type = &nvm_bytearray_type, + }, + .len = CIRCUITPY_INTERNAL_NVM_SIZE, + .start_address = (uint8_t*) (CIRCUITPY_INTERNAL_NVM_START_ADDR) +}; +#endif + +// This maps MCU pin names to pin objects. +const mp_rom_map_elem_t mcu_pin_global_dict_table[TOTAL_GPIO_COUNT] = { + { MP_ROM_QSTR(MP_QSTR_GPIO0), MP_ROM_PTR(&pin_GPIO0) }, + { MP_ROM_QSTR(MP_QSTR_GPIO1), MP_ROM_PTR(&pin_GPIO1) }, + { MP_ROM_QSTR(MP_QSTR_GPIO2), MP_ROM_PTR(&pin_GPIO2) }, + { MP_ROM_QSTR(MP_QSTR_GPIO3), MP_ROM_PTR(&pin_GPIO3) }, + { MP_ROM_QSTR(MP_QSTR_GPIO4), MP_ROM_PTR(&pin_GPIO4) }, + { MP_ROM_QSTR(MP_QSTR_GPIO5), MP_ROM_PTR(&pin_GPIO5) }, + { MP_ROM_QSTR(MP_QSTR_GPIO6), MP_ROM_PTR(&pin_GPIO6) }, + { MP_ROM_QSTR(MP_QSTR_GPIO7), MP_ROM_PTR(&pin_GPIO7) }, + { MP_ROM_QSTR(MP_QSTR_GPIO8), MP_ROM_PTR(&pin_GPIO8) }, + { MP_ROM_QSTR(MP_QSTR_GPIO9), MP_ROM_PTR(&pin_GPIO9) }, + { MP_ROM_QSTR(MP_QSTR_GPIO10), MP_ROM_PTR(&pin_GPIO10) }, + { MP_ROM_QSTR(MP_QSTR_GPIO11), MP_ROM_PTR(&pin_GPIO11) }, + { MP_ROM_QSTR(MP_QSTR_GPIO12), MP_ROM_PTR(&pin_GPIO12) }, + { MP_ROM_QSTR(MP_QSTR_GPIO13), MP_ROM_PTR(&pin_GPIO13) }, + { MP_ROM_QSTR(MP_QSTR_GPIO14), MP_ROM_PTR(&pin_GPIO14) }, + { MP_ROM_QSTR(MP_QSTR_GPIO15), MP_ROM_PTR(&pin_GPIO15) }, + { MP_ROM_QSTR(MP_QSTR_GPIO16), MP_ROM_PTR(&pin_GPIO16) }, + { MP_ROM_QSTR(MP_QSTR_GPIO17), MP_ROM_PTR(&pin_GPIO17) }, + { MP_ROM_QSTR(MP_QSTR_GPIO18), MP_ROM_PTR(&pin_GPIO18) }, + { MP_ROM_QSTR(MP_QSTR_GPIO19), MP_ROM_PTR(&pin_GPIO19) }, + { MP_ROM_QSTR(MP_QSTR_GPIO20), MP_ROM_PTR(&pin_GPIO20) }, + { MP_ROM_QSTR(MP_QSTR_GPIO21), MP_ROM_PTR(&pin_GPIO21) }, + { MP_ROM_QSTR(MP_QSTR_GPIO22), MP_ROM_PTR(&pin_GPIO22) }, + { MP_ROM_QSTR(MP_QSTR_GPIO23), MP_ROM_PTR(&pin_GPIO23) }, + { MP_ROM_QSTR(MP_QSTR_GPIO24), MP_ROM_PTR(&pin_GPIO24) }, + { MP_ROM_QSTR(MP_QSTR_GPIO25), MP_ROM_PTR(&pin_GPIO25) }, + { MP_ROM_QSTR(MP_QSTR_GPIO26), MP_ROM_PTR(&pin_GPIO26) }, + { MP_ROM_QSTR(MP_QSTR_GPIO27), MP_ROM_PTR(&pin_GPIO27) }, + { MP_ROM_QSTR(MP_QSTR_GPIO28), MP_ROM_PTR(&pin_GPIO28) }, + { MP_ROM_QSTR(MP_QSTR_GPIO29), MP_ROM_PTR(&pin_GPIO29) }, +}; +MP_DEFINE_CONST_DICT(mcu_pin_globals, mcu_pin_global_dict_table); diff --git a/ports/raspberrypi/common-hal/microcontroller/__init__.h b/ports/raspberrypi/common-hal/microcontroller/__init__.h new file mode 100644 index 0000000000..cc509b6b12 --- /dev/null +++ b/ports/raspberrypi/common-hal/microcontroller/__init__.h @@ -0,0 +1,36 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER___INIT___H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER___INIT___H + +#include "src/rp2040/hardware_regs/include/hardware/platform_defs.h" + +#define TOTAL_GPIO_COUNT NUM_BANK0_GPIOS + +extern const mp_rom_map_elem_t mcu_pin_global_dict_table[TOTAL_GPIO_COUNT]; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER___INIT___H diff --git a/ports/raspberrypi/common-hal/neopixel_write/__init__.c b/ports/raspberrypi/common-hal/neopixel_write/__init__.c new file mode 100644 index 0000000000..10462b5a33 --- /dev/null +++ b/ports/raspberrypi/common-hal/neopixel_write/__init__.c @@ -0,0 +1,95 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/neopixel_write/__init__.h" + +#include "bindings/rp2pio/StateMachine.h" +#include "common-hal/rp2pio/StateMachine.h" +#include "shared-bindings/microcontroller/__init__.h" + +#include "supervisor/port.h" + +uint64_t next_start_raw_ticks = 0; + +// NeoPixels are 800khz bit streams. Zeroes are 1/3 duty cycle (~416ns) and ones +// are 2/3 duty cycle (~833ns). Each of the instructions below take 1/3 duty +// cycle. The first two instructions always run while only one of the two final +// instructions run per bit. We start with the low period because it can be +// longer than 1/3 period while waiting for more data. +const uint16_t neopixel_program[] = { +// bitloop: +// out x 1 side 0 [1]; Side-set still takes place before instruction stalls + 0x6121, +// jmp !x do_zero side 1 [1]; Branch on the bit we shifted out after 1/3 duty delay. Positive pulse + 0x1123, +// do_one: +// jmp bitloop side 1 [1]; Continue driving high, for a long pulse + 0x1100, +// do_zero: +// nop side 0 [1]; Or drive low, for a short pulse + 0xa142 +}; + +const uint16_t init_program[] = { + 0xe081 +}; + +void common_hal_neopixel_write(const digitalio_digitalinout_obj_t* digitalinout, uint8_t *pixels, uint32_t num_bytes) { + // Set everything up. + rp2pio_statemachine_obj_t state_machine; + + // TODO: Cache the state machine after we create it once. We'll need a way to + // change the pins then though. + uint8_t pin_number = digitalinout->pin->number; + bool ok = rp2pio_statemachine_construct(&state_machine, + neopixel_program, sizeof(neopixel_program) / sizeof(neopixel_program[0]), + 800000 * 6, // 800 khz * 6 cycles per bit + init_program, 1, + NULL, 1, + NULL, 1, + digitalinout->pin, 1, + digitalinout->pin, 1, + 1 << pin_number, true, false, + true, 8, false, // TX, auto pull every 8 bits. shift left to output msb first + false, 32, true, // RX setting we don't use + false); // claim pins + if (!ok) { + // Do nothing. Maybe bitbang? + return; + } + + // Wait to make sure we don't append onto the last transmission. This should only be a tick or + // two. + while (port_get_raw_ticks(NULL) < next_start_raw_ticks) {} + + common_hal_rp2pio_statemachine_write(&state_machine, pixels, num_bytes); + + // Use a private deinit of the state machine that doesn't reset the pin. + rp2pio_statemachine_deinit(&state_machine, true); + gpio_init(digitalinout->pin->number); + // Update the next start. + next_start_raw_ticks = port_get_raw_ticks(NULL) + 1; +} diff --git a/ports/raspberrypi/common-hal/os/__init__.c b/ports/raspberrypi/common-hal/os/__init__.c new file mode 100644 index 0000000000..dcbd06e937 --- /dev/null +++ b/ports/raspberrypi/common-hal/os/__init__.c @@ -0,0 +1,62 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "genhdr/mpversion.h" +#include "py/mpconfig.h" +#include "py/objstr.h" +#include "py/objtuple.h" +#include "py/qstr.h" + + +STATIC const qstr os_uname_info_fields[] = { + MP_QSTR_sysname, MP_QSTR_nodename, + MP_QSTR_release, MP_QSTR_version, MP_QSTR_machine +}; +STATIC const MP_DEFINE_STR_OBJ(os_uname_info_sysname_obj, "rp2040"); +STATIC const MP_DEFINE_STR_OBJ(os_uname_info_nodename_obj, "rp2040"); +STATIC const MP_DEFINE_STR_OBJ(os_uname_info_release_obj, MICROPY_VERSION_STRING); +STATIC const MP_DEFINE_STR_OBJ(os_uname_info_version_obj, MICROPY_GIT_TAG " on " MICROPY_BUILD_DATE); +STATIC const MP_DEFINE_STR_OBJ(os_uname_info_machine_obj, MICROPY_HW_BOARD_NAME " with " MICROPY_HW_MCU_NAME); + + +STATIC MP_DEFINE_ATTRTUPLE( + os_uname_info_obj, + os_uname_info_fields, + 5, + (mp_obj_t)&os_uname_info_sysname_obj, + (mp_obj_t)&os_uname_info_nodename_obj, + (mp_obj_t)&os_uname_info_release_obj, + (mp_obj_t)&os_uname_info_version_obj, + (mp_obj_t)&os_uname_info_machine_obj +); + +mp_obj_t common_hal_os_uname(void) { + return (mp_obj_t)&os_uname_info_obj; +} + +bool common_hal_os_urandom(uint8_t* buffer, uint32_t length) { + return false; +} diff --git a/ports/raspberrypi/common-hal/pwmio/PWMOut.c b/ports/raspberrypi/common-hal/pwmio/PWMOut.c new file mode 100644 index 0000000000..567ec5ef54 --- /dev/null +++ b/ports/raspberrypi/common-hal/pwmio/PWMOut.c @@ -0,0 +1,216 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include + +#include "py/runtime.h" +#include "common-hal/pwmio/PWMOut.h" +#include "shared-bindings/pwmio/PWMOut.h" +#include "shared-bindings/microcontroller/Processor.h" + +#include "supervisor/shared/translate.h" + +#include "src/rp2040/hardware_regs/include/hardware/platform_defs.h" +#include "src/rp2_common/hardware_clocks/include/hardware/clocks.h" +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" +#include "src/rp2_common/hardware_pwm/include/hardware/pwm.h" + +uint32_t target_slice_frequencies[NUM_PWM_SLICES]; +uint32_t slice_fixed_frequency; + +#define CHANNELS_PER_SLICE 2 +static uint32_t channel_use; +static uint32_t never_reset_channel; + +static uint32_t _mask(uint8_t slice, uint8_t channel) { + return 1 << (slice * CHANNELS_PER_SLICE + channel); +} + +void common_hal_pwmio_pwmout_never_reset(pwmio_pwmout_obj_t *self) { + never_reset_channel |= _mask(self->slice, self->channel); + + never_reset_pin_number(self->pin->number); +} + +void common_hal_pwmio_pwmout_reset_ok(pwmio_pwmout_obj_t *self) { + never_reset_channel &= ~_mask(self->slice, self->channel); +} + +void pwmout_reset(void) { + // Reset all slices + for (size_t slice = 0; slice < NUM_PWM_SLICES; slice++) { + bool reset = true; + for (size_t channel = 0; channel < CHANNELS_PER_SLICE; channel++) { + uint32_t channel_use_mask = _mask(slice, channel); + if ((never_reset_channel & channel_use_mask) != 0) { + reset = false; + continue; + } + channel_use &= ~channel_use_mask; + } + if (!reset) { + continue; + } + pwm_set_enabled(slice, false); + target_slice_frequencies[slice] = 0; + slice_fixed_frequency &= ~(1 << slice); + } +} + +pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, + const mcu_pin_obj_t* pin, + uint16_t duty, + uint32_t frequency, + bool variable_frequency) { + self->pin = pin; + self->variable_frequency = variable_frequency; + self->duty_cycle = duty; + + if (frequency == 0 || frequency > (common_hal_mcu_processor_get_frequency() / 2)) { + return PWMOUT_INVALID_FREQUENCY; + } + + uint8_t slice = pwm_gpio_to_slice_num(pin->number); + uint8_t channel = pwm_gpio_to_channel(pin->number); + uint32_t channel_use_mask = _mask(slice, channel); + + // Check the channel first. + if ((channel_use & channel_use_mask) != 0) { + return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; + } + // Now check if the slice is in use and if we can share with it. + if (target_slice_frequencies[slice] > 0) { + // If we want to change frequency then we can't share. + if (variable_frequency) { + return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; + } + // If the other user wants to change frequency then we can't share either. + if ((slice_fixed_frequency & (1 << slice)) != 0) { + return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; + } + // If we're both fixed frequency but we don't match target frequencies then we can't share. + if (target_slice_frequencies[slice] != frequency) { + return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; + } + } + self->slice = slice; + self->channel = channel; + channel_use |= channel_use_mask; + if (!variable_frequency) { + slice_fixed_frequency |= 1 << slice; + } + + if (target_slice_frequencies[slice] != frequency) { + // Reset the counter and compare values. + pwm_hw->slice[slice].ctr = PWM_CH0_CTR_RESET; + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); + common_hal_pwmio_pwmout_set_frequency(self, frequency); + pwm_set_enabled(slice, true); + } else { + common_hal_pwmio_pwmout_set_duty_cycle(self, duty); + } + + // Connect to the pad last to avoid any glitches from changing settings. + gpio_set_function(pin->number, GPIO_FUNC_PWM); + + return PWMOUT_OK; +} + +bool common_hal_pwmio_pwmout_deinited(pwmio_pwmout_obj_t* self) { + return self->pin == NULL; +} + +void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { + if (common_hal_pwmio_pwmout_deinited(self)) { + return; + } + uint32_t channel_mask = _mask(self->slice, self->channel); + channel_use &= ~channel_mask; + never_reset_channel &= ~channel_mask; + uint32_t slice_mask = ((1 << CHANNELS_PER_SLICE) - 1) << (self->slice * CHANNELS_PER_SLICE + self->channel); + if ((channel_use & slice_mask) == 0) { + target_slice_frequencies[self->slice] = 0; + slice_fixed_frequency &= ~(1 << self->slice); + pwm_set_enabled(self->slice, false); + } + + reset_pin_number(self->pin->number); + self->pin = NULL; +} + +extern void common_hal_pwmio_pwmout_set_duty_cycle(pwmio_pwmout_obj_t* self, uint16_t duty) { + self->duty_cycle = duty; + uint16_t actual_duty = duty * self->top / ((1 << 16) - 1); + pwm_set_chan_level(self->slice, self->channel, actual_duty); +} + +uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { + return self->duty_cycle; +} + +void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { + if (frequency == 0 || frequency > (common_hal_mcu_processor_get_frequency() / 2)) { + mp_raise_ValueError(translate("Invalid PWM frequency")); + } + + target_slice_frequencies[self->slice] = frequency; + + // For low frequencies use the divider to give us full resolution duty_cycle. + if (frequency < (common_hal_mcu_processor_get_frequency() / (1 << 16))) { + // Compute the divisor. It's an 8 bit integer and 4 bit fraction. Therefore, + // we compute everything * 16 for the fractional part. + // This is 1 << 12 because 4 bits are the * 16. + uint64_t frequency16 = ((uint64_t) clock_get_hz(clk_sys)) / (1 << 12); + uint64_t div16 = frequency16 / frequency; + // Round the divisor to try and get closest to the target frequency. We could + // also always round up and use TOP to get us closer. We may not need that though. + if (frequency16 % frequency >= frequency / 2) { + div16 += 1; + } + if (div16 >= (1 << 12)) { + div16 = (1 << 12) - 1; + } + self->actual_frequency = frequency16 / div16; + self->top = 1 << 16; + pwm_set_clkdiv_int_frac(self->slice, div16 / 16, div16 % 16); + pwm_set_wrap(self->slice, self->top - 1); + } else { + uint32_t top = common_hal_mcu_processor_get_frequency() / frequency; + self->actual_frequency = common_hal_mcu_processor_get_frequency() / top; + self->top = top; + pwm_set_clkdiv_int_frac(self->slice, 1, 0); + pwm_set_wrap(self->slice, self->top - 1); + } + common_hal_pwmio_pwmout_set_duty_cycle(self, self->duty_cycle); +} + +uint32_t common_hal_pwmio_pwmout_get_frequency(pwmio_pwmout_obj_t* self) { + return self->actual_frequency; +} + +bool common_hal_pwmio_pwmout_get_variable_frequency(pwmio_pwmout_obj_t* self) { + return self->variable_frequency; +} diff --git a/ports/raspberrypi/common-hal/pwmio/PWMOut.h b/ports/raspberrypi/common-hal/pwmio/PWMOut.h new file mode 100644 index 0000000000..50f84777b5 --- /dev/null +++ b/ports/raspberrypi/common-hal/pwmio/PWMOut.h @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H +#define MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H + +#include "common-hal/microcontroller/Pin.h" + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + const mcu_pin_obj_t *pin; + uint8_t slice; + uint8_t channel; + bool variable_frequency; + uint16_t duty_cycle; + uint32_t actual_frequency; + uint32_t top; +} pwmio_pwmout_obj_t; + +void pwmout_reset(void); + +#endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/raspberrypi/common-hal/pwmio/__init__.c b/ports/raspberrypi/common-hal/pwmio/__init__.c new file mode 100644 index 0000000000..9e551a1072 --- /dev/null +++ b/ports/raspberrypi/common-hal/pwmio/__init__.c @@ -0,0 +1 @@ +// No pwmio module functions. diff --git a/ports/raspberrypi/common-hal/rp2pio/StateMachine.c b/ports/raspberrypi/common-hal/rp2pio/StateMachine.c new file mode 100644 index 0000000000..6510410b0e --- /dev/null +++ b/ports/raspberrypi/common-hal/rp2pio/StateMachine.c @@ -0,0 +1,585 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "bindings/rp2pio/StateMachine.h" + +#include "common-hal/microcontroller/__init__.h" +#include "shared-bindings/microcontroller/Pin.h" + +#include "src/rp2040/hardware_regs/include/hardware/platform_defs.h" +#include "src/rp2_common/hardware_clocks/include/hardware/clocks.h" +#include "src/rp2_common/hardware_dma/include/hardware/dma.h" +#include "src/rp2_common/hardware_pio/include/hardware/pio_instructions.h" +#include "src/rp2040/hardware_structs/include/hardware/structs/iobank0.h" + +#include "lib/utils/interrupt_char.h" +#include "py/obj.h" +#include "py/objproperty.h" +#include "py/runtime.h" + +// Count how many state machines are using each pin. +STATIC uint8_t _pin_reference_count[TOTAL_GPIO_COUNT]; +STATIC uint32_t _current_program_id[NUM_PIOS][NUM_PIO_STATE_MACHINES]; +STATIC uint8_t _current_program_offset[NUM_PIOS][NUM_PIO_STATE_MACHINES]; +STATIC uint8_t _current_program_len[NUM_PIOS][NUM_PIO_STATE_MACHINES]; +STATIC bool _never_reset[NUM_PIOS][NUM_PIO_STATE_MACHINES]; + +STATIC uint32_t _current_pins[NUM_PIOS]; +STATIC uint32_t _current_sm_pins[NUM_PIOS][NUM_PIO_STATE_MACHINES]; + +STATIC PIO pio_instances[2] = {pio0, pio1}; + +void _reset_statemachine(PIO pio, uint8_t sm, bool leave_pins) { + uint8_t pio_index = pio_get_index(pio); + pio_sm_unclaim(pio, sm); + uint32_t program_id = _current_program_id[pio_index][sm]; + if (program_id == 0) { + return; + } + _current_program_id[pio_index][sm] = 0; + bool program_in_use = false; + for (size_t i = 0; i < NUM_PIO_STATE_MACHINES; i++) { + if (_current_program_id[pio_index][i] == program_id) { + program_in_use = true; + break; + } + } + if (!program_in_use) { + uint8_t offset = _current_program_offset[pio_index][sm]; + pio_program_t program_struct = { + .length = _current_program_len[pio_index][sm] + }; + pio_remove_program(pio, &program_struct, offset); + } + + uint32_t pins = _current_sm_pins[pio_index][sm]; + for (size_t pin_number = 0; pin_number < TOTAL_GPIO_COUNT; pin_number++) { + if ((pins & (1 << pin_number)) == 0) { + continue; + } + _pin_reference_count[pin_number]--; + if (_pin_reference_count[pin_number] == 0) { + if (!leave_pins) { + reset_pin_number(pin_number); + } + _current_pins[pio_index] &= ~(1 << pin_number); + } + } + _current_sm_pins[pio_index][sm] = 0; +} + +void reset_rp2pio_statemachine(void) { + for (size_t i = 0; i < NUM_PIOS; i++) { + PIO pio = pio_instances[i]; + for (size_t j = 0; j < NUM_PIO_STATE_MACHINES; j++) { + if (_never_reset[i][j]) { + continue; + } + _reset_statemachine(pio, j, false); + } + } +} + +STATIC uint32_t _check_pins_free(const mcu_pin_obj_t * first_pin, uint8_t pin_count, bool exclusive_pin_use) { + uint32_t pins_we_use = 0; + if (first_pin != NULL) { + for (size_t i = 0; i < pin_count; i++) { + uint8_t pin_number = first_pin->number + i; + if (pin_number >= TOTAL_GPIO_COUNT) { + mp_raise_ValueError(translate("Pin count too large")); + } + const mcu_pin_obj_t * pin = mcu_pin_global_dict_table[pin_number].value; + if (exclusive_pin_use || _pin_reference_count[pin_number] == 0) { + assert_pin_free(pin); + } + pins_we_use |= 1 << pin_number; + } + } + return pins_we_use; +} + + +bool rp2pio_statemachine_construct(rp2pio_statemachine_obj_t *self, + const uint16_t* program, size_t program_len, + size_t frequency, + const uint16_t* init, size_t init_len, + const mcu_pin_obj_t * first_out_pin, uint8_t out_pin_count, + const mcu_pin_obj_t * first_in_pin, uint8_t in_pin_count, + const mcu_pin_obj_t * first_set_pin, uint8_t set_pin_count, + const mcu_pin_obj_t * first_sideset_pin, uint8_t sideset_pin_count, + uint32_t pins_we_use, bool tx_fifo, bool rx_fifo, + bool auto_pull, uint8_t pull_threshold, bool out_shift_right, + bool auto_push, uint8_t push_threshold, bool in_shift_right, + bool claim_pins) { + // Create a program id that isn't the pointer so we can store it without storing the original object. + uint32_t program_id = ~((uint32_t) program); + + // Next, find a PIO and state machine to use. + size_t pio_index = NUM_PIOS; + uint8_t program_offset = 32; + pio_program_t program_struct = { + .instructions = (uint16_t*) program, + .length = program_len, + .origin = 0 + }; + for (size_t i = 0; i < NUM_PIOS; i++) { + PIO pio = pio_instances[i]; + uint8_t free_count = 0; + for (size_t j = 0; j < NUM_PIO_STATE_MACHINES; j++) { + if (_current_program_id[i][j] == program_id && + _current_program_len[i][j] == program_len) { + program_offset = _current_program_offset[i][j]; + } + int temp_claim = pio_claim_unused_sm(pio, false); + if (temp_claim >= 0) { + pio_sm_unclaim(pio, temp_claim); + free_count++; + } + } + if (free_count > 0 && (program_offset < 32 || pio_can_add_program(pio, &program_struct))) { + pio_index = i; + if (program_offset < 32) { + break; + } + } + // Reset program offset if we weren't able to find a free state machine + // on that PIO. (We would have broken the loop otherwise.) + program_offset = 32; + } + + int state_machine = -1; + if (pio_index < NUM_PIOS) { + PIO pio = pio_instances[pio_index]; + for (size_t i = 0; i < NUM_PIOS; i++) { + if (i == pio_index) { + continue; + } + if ((_current_pins[i] & pins_we_use) != 0) { + // Pin in use by another PIO already. + return false; + } + } + state_machine = pio_claim_unused_sm(pio, false); + } + if (pio_index == NUM_PIOS || state_machine < 0 || state_machine >= NUM_PIO_STATE_MACHINES) { + return false; + } + + self->pio = pio_instances[pio_index]; + self->state_machine = state_machine; + if (program_offset == 32) { + program_offset = pio_add_program(self->pio, &program_struct); + } + _current_program_id[pio_index][state_machine] = program_id; + _current_program_len[pio_index][state_machine] = program_len; + _current_program_offset[pio_index][state_machine] = program_offset; + _current_sm_pins[pio_index][state_machine] = pins_we_use; + _current_pins[pio_index] |= pins_we_use; + + for (size_t pin_number = 0; pin_number < TOTAL_GPIO_COUNT; pin_number++) { + if ((pins_we_use & (1 << pin_number)) == 0) { + continue; + } + _pin_reference_count[pin_number]++; + const mcu_pin_obj_t * pin = mcu_pin_global_dict_table[pin_number].value; + // Also claim the pin at the top level when we're the first to grab it. + if (_pin_reference_count[pin_number] == 1) { + if (claim_pins) { + claim_pin(pin); + } + pio_gpio_init(self->pio, pin_number); + } + } + + pio_sm_config c = {0, 0, 0}; + + if (frequency == 0) { + frequency = clock_get_hz(clk_sys); + } + uint64_t frequency256 = ((uint64_t) clock_get_hz(clk_sys)) * 256; + uint64_t div256 = frequency256 / frequency; + if (frequency256 % div256 > 0) { + div256 += 1; + } + self->actual_frequency = frequency256 / div256; + sm_config_set_clkdiv_int_frac(&c, div256 / 256, div256 % 256); + + if (first_out_pin != NULL) { + sm_config_set_out_pins(&c, first_out_pin->number, out_pin_count); + } + if (first_in_pin != NULL) { + sm_config_set_in_pins(&c, first_in_pin->number); + } + if (first_set_pin != NULL) { + sm_config_set_set_pins(&c, first_set_pin->number, set_pin_count); + } + if (first_sideset_pin != NULL) { + sm_config_set_sideset(&c, sideset_pin_count, false /* optional */, false /* pin direction */); + sm_config_set_sideset_pins(&c, first_sideset_pin->number); + } + sm_config_set_wrap(&c, program_offset, program_offset + program_len - 1); + sm_config_set_in_shift(&c, in_shift_right, auto_push, push_threshold); + sm_config_set_out_shift(&c, out_shift_right, auto_pull, pull_threshold); + + enum pio_fifo_join join = PIO_FIFO_JOIN_NONE; + if (!rx_fifo) { + join = PIO_FIFO_JOIN_TX; + } else if (!tx_fifo) { + join = PIO_FIFO_JOIN_RX; + } + if (rx_fifo) { + self->rx_dreq = pio_get_dreq(self->pio, self->state_machine, false); + } + if (tx_fifo) { + self->tx_dreq = pio_get_dreq(self->pio, self->state_machine, true); + } + self->in = rx_fifo; + self->out = tx_fifo; + self->out_shift_right = out_shift_right; + self->in_shift_right = in_shift_right; + + sm_config_set_fifo_join(&c, join); + + pio_sm_init(self->pio, self->state_machine, program_offset, &c); + pio_sm_set_enabled(self->pio, self->state_machine, true); + for (size_t i = 0; i < init_len; i++) { + pio_sm_exec(self->pio, self->state_machine, init[i]); + } + return true; +} + +void common_hal_rp2pio_statemachine_construct(rp2pio_statemachine_obj_t *self, + const uint16_t* program, size_t program_len, + size_t frequency, + const uint16_t* init, size_t init_len, + const mcu_pin_obj_t * first_out_pin, uint8_t out_pin_count, + const mcu_pin_obj_t * first_in_pin, uint8_t in_pin_count, + const mcu_pin_obj_t * first_set_pin, uint8_t set_pin_count, + const mcu_pin_obj_t * first_sideset_pin, uint8_t sideset_pin_count, + bool exclusive_pin_use, + bool auto_pull, uint8_t pull_threshold, bool out_shift_right, + bool auto_push, uint8_t push_threshold, bool in_shift_right) { + + // First, check that all pins are free OR already in use by any PIO if exclusive_pin_use is false. + uint32_t pins_we_use = 0; + pins_we_use |= _check_pins_free(first_out_pin, out_pin_count, exclusive_pin_use); + pins_we_use |= _check_pins_free(first_in_pin, in_pin_count, exclusive_pin_use); + pins_we_use |= _check_pins_free(first_set_pin, set_pin_count, exclusive_pin_use); + pins_we_use |= _check_pins_free(first_sideset_pin, sideset_pin_count, exclusive_pin_use); + + // Look through the program to see what we reference and make sure it was provided. + bool tx_fifo = false; + bool rx_fifo = false; + bool in_loaded = false; // can be loaded in other ways besides the fifo + bool out_loaded = false; + bool in_used = false; + bool out_used = false; + for (size_t i = 0; i < program_len; i++) { + uint16_t full_instruction = program[i]; + uint16_t instruction = full_instruction & 0xe000; + if (instruction == 0x8000) { + if ((full_instruction & 0xe080) == pio_instr_bits_push) { + rx_fifo = true; + in_loaded = true; + } else { // pull otherwise. + tx_fifo = true; + out_loaded = true; + } + } + if (instruction == pio_instr_bits_jmp) { + uint16_t condition = (full_instruction & 0x00e0) >> 5; + if (condition == 0x6) { // GPIO + mp_raise_NotImplementedError_varg(translate("Instruction %d jumps on pin"), i); + } + } + if (instruction == pio_instr_bits_wait) { + uint16_t wait_source = (full_instruction & 0x0060) >> 5; + uint16_t wait_index = full_instruction & 0x001f; + if (wait_source == 0 && (pins_we_use & (1 << wait_index)) == 0) { // GPIO + mp_raise_ValueError_varg(translate("Instruction %d uses extra pin"), i); + } + if (wait_source == 1) { // Input pin + if (first_in_pin == NULL) { + mp_raise_ValueError_varg(translate("Missing first_in_pin. Instruction %d waits based on pin"), i); + } + if (wait_index > in_pin_count) { + mp_raise_ValueError_varg(translate("Instruction %d waits on input outside of count"), i); + } + } + } + if (instruction == pio_instr_bits_in) { + uint16_t source = (full_instruction & 0x00e0) >> 5; + uint16_t bit_count = full_instruction & 0x001f; + if (source == 0) { + if (first_in_pin == NULL) { + mp_raise_ValueError_varg(translate("Missing first_in_pin. Instruction %d shifts in from pin(s)"), i); + } + if (bit_count > in_pin_count) { + mp_raise_ValueError_varg(translate("Instruction %d shifts in more bits than pin count"), i); + } + } + if (auto_push) { + in_loaded = true; + rx_fifo = true; + } + in_used = true; + } + if (instruction == pio_instr_bits_out) { + uint16_t bit_count = full_instruction & 0x001f; + uint16_t destination = (full_instruction & 0x00e0) >> 5; + // Check for pins or pindirs destination. + if (destination == 0x0 || destination == 0x4) { + if (first_out_pin == NULL) { + mp_raise_ValueError_varg(translate("Missing first_out_pin. Instruction %d shifts out to pin(s)"), i); + } + if (bit_count > out_pin_count) { + mp_raise_ValueError_varg(translate("Instruction %d shifts out more bits than pin count"), i); + } + } + if (auto_pull) { + out_loaded = true; + tx_fifo = true; + } + out_used = true; + } + if (instruction == pio_instr_bits_set) { + uint16_t destination = (full_instruction & 0x00e0) >> 5; + // Check for pins or pindirs destination. + if ((destination == 0x00 || destination == 0x4) && first_set_pin == NULL) { + mp_raise_ValueError_varg(translate("Missing first_set_pin. Instruction %d sets pin(s)"), i); + } + } + if (instruction == pio_instr_bits_mov) { + uint16_t source = full_instruction & 0x0007; + uint16_t destination = (full_instruction & 0x00e0) >> 5; + // Check for pins or pindirs destination. + if (destination == 0x0 && first_out_pin == NULL) { + mp_raise_ValueError_varg(translate("Missing first_out_pin. Instruction %d writes pin(s)"), i); + } + if (source == 0x0 && first_in_pin == NULL) { + mp_raise_ValueError_varg(translate("Missing first_in_pin. Instruction %d reads pin(s)"), i); + } + if (destination == 0x6) { + in_loaded = true; + } else if (destination == 0x7) { + out_loaded = true; + } + } + } + + if (!in_loaded && in_used) { + mp_raise_ValueError_varg(translate("Program does IN without loading ISR")); + } + if (!out_loaded && out_used) { + mp_raise_ValueError_varg(translate("Program does OUT without loading OSR")); + } + + if (in_pin_count > 8 || out_pin_count > 8) { + mp_raise_NotImplementedError(translate("Only IN/OUT of up to 8 supported")); + } + + bool ok = rp2pio_statemachine_construct(self, + program, program_len, + frequency, + init, init_len, + first_out_pin, out_pin_count, + first_in_pin, in_pin_count, + first_set_pin, set_pin_count, + first_sideset_pin, sideset_pin_count, + pins_we_use, tx_fifo, rx_fifo, + auto_pull, pull_threshold, out_shift_right, + auto_push, push_threshold, in_shift_right, + true /* claim pins */); + if (!ok) { + mp_raise_RuntimeError(translate("All state machines in use")); + } +} + +uint32_t common_hal_rp2pio_statemachine_get_frequency(rp2pio_statemachine_obj_t* self) { + return self->actual_frequency; +} + +void rp2pio_statemachine_deinit(rp2pio_statemachine_obj_t *self, bool leave_pins) { + uint8_t sm = self->state_machine; + uint8_t pio_index = pio_get_index(self->pio); + _never_reset[pio_index][sm] = false; + _reset_statemachine(self->pio, sm, leave_pins); + self->state_machine = NUM_PIO_STATE_MACHINES; +} + +void common_hal_rp2pio_statemachine_deinit(rp2pio_statemachine_obj_t *self) { + rp2pio_statemachine_deinit(self, false); +} + +void common_hal_rp2pio_statemachine_never_reset(rp2pio_statemachine_obj_t *self) { + uint8_t sm = self->state_machine; + uint8_t pio_index = pio_get_index(self->pio); + _never_reset[pio_index][sm] = true; + // TODO: never reset all the pins +} + +bool common_hal_rp2pio_statemachine_deinited(rp2pio_statemachine_obj_t *self) { + return self->state_machine == NUM_PIO_STATE_MACHINES; +} + +static bool _transfer(rp2pio_statemachine_obj_t *self, + const uint8_t *data_out, size_t out_len, + uint8_t *data_in, size_t in_len) { + // This implementation is based on SPI but varies because the tx and rx buffers + // may be different lengths and occur at different times or speeds. + + // Use DMA for large transfers if channels are available + const size_t dma_min_size_threshold = 32; + int chan_tx = -1; + int chan_rx = -1; + size_t len = MAX(out_len, in_len); + bool tx = data_out != NULL; + bool rx = data_in != NULL; + if (len >= dma_min_size_threshold) { + // Use DMA channels to service the two FIFOs + if (tx) { + chan_tx = dma_claim_unused_channel(false); + } + if (rx) { + chan_rx = dma_claim_unused_channel(false); + } + } + volatile uint8_t* tx_destination = NULL; + const volatile uint8_t* rx_source = NULL; + if (tx) { + tx_destination = (volatile uint8_t*) &self->pio->txf[self->state_machine]; + if (!self->out_shift_right) { + tx_destination += 3; + } + } + if (rx) { + rx_source = (const volatile uint8_t*) &self->pio->rxf[self->state_machine]; + if (!self->in_shift_right) { + rx_source += 3; + } + } + bool use_dma = (!rx || chan_rx >= 0) && (!tx || chan_tx >= 0); + if (use_dma) { + dma_channel_config c; + uint32_t channel_mask = 0; + if (tx) { + c = dma_channel_get_default_config(chan_tx); + channel_config_set_transfer_data_size(&c, DMA_SIZE_8); + channel_config_set_dreq(&c, self->tx_dreq); + channel_config_set_read_increment(&c, true); + channel_config_set_write_increment(&c, false); + dma_channel_configure(chan_tx, &c, + tx_destination, + data_out, + len, + false); + channel_mask |= 1u << chan_tx; + } + if (rx) { + c = dma_channel_get_default_config(chan_rx); + channel_config_set_transfer_data_size(&c, DMA_SIZE_8); + channel_config_set_dreq(&c, self->rx_dreq); + channel_config_set_read_increment(&c, false); + channel_config_set_write_increment(&c, true); + dma_channel_configure(chan_rx, &c, + data_in, + rx_source, + len, + false); + channel_mask |= 1u << chan_rx; + } + + dma_start_channel_mask(channel_mask); + while ((rx && dma_channel_is_busy(chan_rx)) || + (tx && dma_channel_is_busy(chan_tx))) { + // TODO: We should idle here until we get a DMA interrupt or something else. + RUN_BACKGROUND_TASKS; + if (mp_hal_is_interrupted()) { + if (rx && dma_channel_is_busy(chan_rx)) { + dma_channel_abort(chan_rx); + } + if (tx && dma_channel_is_busy(chan_tx)) { + dma_channel_abort(chan_tx); + } + break; + } + } + // Clear the stall bit so we can detect when the state machine is done transmitting. + self->pio->fdebug = PIO_FDEBUG_TXSTALL_BITS; + } + + // If we have claimed only one channel successfully, we should release immediately. This also + // releases the DMA after use_dma has been done. + if (chan_rx >= 0) { + dma_channel_unclaim(chan_rx); + } + if (chan_tx >= 0) { + dma_channel_unclaim(chan_tx); + } + + if (!use_dma && !mp_hal_is_interrupted()) { + // Use software for small transfers, or if couldn't claim two DMA channels + size_t rx_remaining = in_len; + size_t tx_remaining = out_len; + + while (rx_remaining || tx_remaining) { + if (tx_remaining && !pio_sm_is_tx_fifo_full(self->pio, self->state_machine)) { + *tx_destination = *data_out; + data_out++; + --tx_remaining; + } + if (rx_remaining && !pio_sm_is_rx_fifo_empty(self->pio, self->state_machine)) { + *data_in = (uint8_t) *rx_source; + data_in++; + --rx_remaining; + } + RUN_BACKGROUND_TASKS; + if (mp_hal_is_interrupted()) { + break; + } + } + // Clear the stall bit so we can detect when the state machine is done transmitting. + self->pio->fdebug = PIO_FDEBUG_TXSTALL_BITS; + } + // Wait for the state machine to finish transmitting the data we've queued + // up. + if (tx) { + while (!pio_sm_is_tx_fifo_empty(self->pio, self->state_machine) || + (self->pio->fdebug & PIO_FDEBUG_TXSTALL_BITS) == 0) { + RUN_BACKGROUND_TASKS; + } + } + return true; +} + +// Writes out the given data. +bool common_hal_rp2pio_statemachine_write(rp2pio_statemachine_obj_t *self, + const uint8_t *data, size_t len) { + if (!self->out) { + mp_raise_RuntimeError(translate("No out in program")); + } + return _transfer(self, data, len, NULL, 0); +} diff --git a/ports/raspberrypi/common-hal/rp2pio/StateMachine.h b/ports/raspberrypi/common-hal/rp2pio/StateMachine.h new file mode 100644 index 0000000000..6b70b6b5b5 --- /dev/null +++ b/ports/raspberrypi/common-hal/rp2pio/StateMachine.h @@ -0,0 +1,68 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_RP2PIO_STATEMACHINE_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_RP2PIO_STATEMACHINE_H + +#include "py/obj.h" + +#include "src/rp2_common/hardware_pio/include/hardware/pio.h" + +typedef struct { + mp_obj_base_t base; + uint32_t pins; // Bitmask of what pins this state machine uses. + int state_machine; + PIO pio; + bool in; + bool out; + uint tx_dreq; + uint rx_dreq; + bool out_shift_right; + bool in_shift_right; + uint32_t actual_frequency; +} rp2pio_statemachine_obj_t; + +void reset_rp2pio_statemachine(void); + +// Minimal internal version that only fails on pin error (not in use) or full PIO. +bool rp2pio_statemachine_construct(rp2pio_statemachine_obj_t *self, + const uint16_t* program, size_t program_len, + size_t frequency, + const uint16_t* init, size_t init_len, + const mcu_pin_obj_t * first_out_pin, uint8_t out_pin_count, + const mcu_pin_obj_t * first_in_pin, uint8_t in_pin_count, + const mcu_pin_obj_t * first_set_pin, uint8_t set_pin_count, + const mcu_pin_obj_t * first_sideset_pin, uint8_t sideset_pin_count, + uint32_t pins_we_use, bool tx_fifo, bool rx_fifo, + bool auto_pull, uint8_t pull_threshold, bool out_shift_right, + bool auto_push, uint8_t push_threshold, bool in_shift_right, + bool claim_pins); + +void rp2pio_statemachine_deinit(rp2pio_statemachine_obj_t *self, bool leave_pins); + +extern const mp_obj_type_t rp2pio_statemachine_type; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_RP2PIO_STATEMACHINE_H diff --git a/ports/raspberrypi/common-hal/rp2pio/__init__.c b/ports/raspberrypi/common-hal/rp2pio/__init__.c new file mode 100644 index 0000000000..21699dfa36 --- /dev/null +++ b/ports/raspberrypi/common-hal/rp2pio/__init__.c @@ -0,0 +1 @@ +// Nothing yet. diff --git a/ports/raspberrypi/common-hal/supervisor/Runtime.c b/ports/raspberrypi/common-hal/supervisor/Runtime.c new file mode 100755 index 0000000000..6be38f216a --- /dev/null +++ b/ports/raspberrypi/common-hal/supervisor/Runtime.c @@ -0,0 +1,37 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2018 Michael Schroeder + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include +#include "shared-bindings/supervisor/Runtime.h" +#include "supervisor/serial.h" + +bool common_hal_get_serial_connected(void) { + return (bool) serial_connected(); +} + +bool common_hal_get_serial_bytes_available(void) { + return (bool) serial_bytes_available(); +} diff --git a/ports/raspberrypi/common-hal/supervisor/Runtime.h b/ports/raspberrypi/common-hal/supervisor/Runtime.h new file mode 100755 index 0000000000..45db489bda --- /dev/null +++ b/ports/raspberrypi/common-hal/supervisor/Runtime.h @@ -0,0 +1,37 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2018 Michael Schroeder + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_SUPERVISOR_RUNTIME_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_SUPERVISOR_RUNTIME_H + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + // Stores no state currently. +} super_runtime_obj_t; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_SUPERVISOR_RUNTIME_H diff --git a/ports/raspberrypi/common-hal/supervisor/__init__.c b/ports/raspberrypi/common-hal/supervisor/__init__.c new file mode 100755 index 0000000000..6dca35fb5a --- /dev/null +++ b/ports/raspberrypi/common-hal/supervisor/__init__.c @@ -0,0 +1,40 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2018 Michael Schroeder + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + + +#include "py/obj.h" + +#include "shared-bindings/supervisor/__init__.h" +#include "shared-bindings/supervisor/Runtime.h" + + +// The singleton supervisor.Runtime object, bound to supervisor.runtime +// It currently only has properties, and no state. +const super_runtime_obj_t common_hal_supervisor_runtime_obj = { + .base = { + .type = &supervisor_runtime_type, + }, +}; diff --git a/ports/raspberrypi/fatfs_port.c b/ports/raspberrypi/fatfs_port.c new file mode 100644 index 0000000000..c65a73a428 --- /dev/null +++ b/ports/raspberrypi/fatfs_port.c @@ -0,0 +1,48 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * SPDX-FileCopyrightText: Copyright (c) 2013, 2014 Damien P. George + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "py/mphal.h" +#include "py/runtime.h" +#include "lib/oofatfs/ff.h" /* FatFs lower layer API */ +#include "lib/oofatfs/diskio.h" /* FatFs lower layer API */ +#include "lib/timeutils/timeutils.h" + +#if CIRCUITPY_RTC +#include "shared-bindings/rtc/RTC.h" +#endif + +DWORD get_fattime(void) { +#if CIRCUITPY_RTC + timeutils_struct_time_t tm; + common_hal_rtc_get_time(&tm); + return ((tm.tm_year - 1980) << 25) | (tm.tm_mon << 21) | (tm.tm_mday << 16) | + (tm.tm_hour << 11) | (tm.tm_min << 5) | (tm.tm_sec >> 1); +#else + return ((2016 - 1980) << 25) | ((9) << 21) | ((1) << 16) | ((16) << 11) | ((43) << 5) | (35 / 2); +#endif + + +} diff --git a/ports/raspberrypi/link.ld b/ports/raspberrypi/link.ld new file mode 100644 index 0000000000..d642fd6807 --- /dev/null +++ b/ports/raspberrypi/link.ld @@ -0,0 +1,250 @@ +/* Based on GCC ARM embedded samples. + Defines the following symbols for use by code: + __exidx_start + __exidx_end + __etext + __data_start__ + __preinit_array_start + __preinit_array_end + __init_array_start + __init_array_end + __fini_array_start + __fini_array_end + __data_end__ + __bss_start__ + __bss_end__ + __end__ + end + __HeapLimit + __StackLimit + __StackTop + __stack (== StackTop) +*/ + +MEMORY +{ + FLASH_FIRMWARE (rx) : ORIGIN = 0x10000000, LENGTH = 1024k + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 256k + SCRATCH_X (rwx) : ORIGIN = 0x20040000, LENGTH = 4k + SCRATCH_Y (rwx) : ORIGIN = 0x20041000, LENGTH = 4k +} + +ENTRY(_entry_point) + +SECTIONS +{ + /* Second stage bootloader is prepended to the image. It must be 256 bytes big + and checksummed. It is usually built by the boot_stage2 target + in the Pico SDK + */ + + .flash_begin : { + __flash_binary_start = .; + } > FLASH_FIRMWARE + + .boot2 : { + __boot2_start__ = .; + KEEP (*(.boot2)) + __boot2_end__ = .; + } > FLASH_FIRMWARE + + ASSERT(__boot2_end__ - __boot2_start__ == 256, + "ERROR: Pico second stage bootloader must be 256 bytes in size") + + /* The second stage will always enter the image at the start of .text. + The debugger will use the ELF entry point, which is the _entry_point + symbol if present, otherwise defaults to start of .text. + This can be used to transfer control back to the bootrom on debugger + launches only, to perform proper flash setup. + */ + + .text : { + __reset_start = .; + KEEP (*(.reset)) + . = ALIGN(256); + __reset_end = .; + ASSERT(__reset_end - __reset_start == 256, "ERROR: reset section should only be 256 bytes"); + KEEP (*(.vectors)) + /* TODO revisit this now memset/memcpy/float in ROM */ + /* bit of a hack right now to exclude all floating point and time critical (e.g. memset, memcpy) code from + * FLASH ... we will include any thing excluded here in .data below by default */ + *(.init) + *(EXCLUDE_FILE(*libgcc.a: *libc.a:*lib_a-mem*.o *libm.a:) .text*) + *(.fini) + /* Pull all c'tors into .text */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + /* Followed by destructors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.eh_frame*) + . = ALIGN(4); + } > FLASH_FIRMWARE + + .rodata : { + *(EXCLUDE_FILE(*libgcc.a: *libc.a:*lib_a-mem*.o *libm.a:) .rodata*) + . = ALIGN(4); + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.flashdata*))) + . = ALIGN(4); + } > FLASH_FIRMWARE + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH_FIRMWARE + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH_FIRMWARE + __exidx_end = .; + + /* Machine inspectable binary information */ + . = ALIGN(4); + __binary_info_start = .; + .binary_info : + { + KEEP(*(.binary_info.keep.*)) + *(.binary_info.*) + } > FLASH_FIRMWARE + __binary_info_end = .; + . = ALIGN(4); + + /* End of .text-like segments */ + __etext = .; + + .ram_vector_table (COPY): { + *(.ram_vector_table) + } > RAM + + .data : { + __data_start__ = .; + *(vtable) + + *(.time_critical*) + + /* remaining .text and .rodata; i.e. stuff we exclude above because we want it in RAM */ + *(.text*) + . = ALIGN(4); + *(.rodata*) + . = ALIGN(4); + + *(.data*) + + . = ALIGN(4); + *(.after_data.*) + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__mutex_array_start = .); + KEEP(*(SORT(.mutex_array.*))) + KEEP(*(.mutex_array)) + PROVIDE_HIDDEN (__mutex_array_end = .); + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(SORT(.preinit_array.*))) + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + *(SORT(.fini_array.*)) + *(.fini_array) + PROVIDE_HIDDEN (__fini_array_end = .); + + *(.jcr) + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + } > RAM AT> FLASH_FIRMWARE + + .uninitialized_data (COPY): { + . = ALIGN(4); + *(.uninitialized_data*) + } > RAM + + /* Start and end symbols must be word-aligned */ + .scratch_x : { + __scratch_x_start__ = .; + *(.scratch_x.*) + . = ALIGN(4); + __scratch_x_end__ = .; + } > SCRATCH_X AT > FLASH_FIRMWARE + __scratch_x_source__ = LOADADDR(.scratch_x); + + .scratch_y : { + __scratch_y_start__ = .; + *(.scratch_y.*) + . = ALIGN(4); + __scratch_y_end__ = .; + } > SCRATCH_Y AT > FLASH_FIRMWARE + __scratch_y_source__ = LOADADDR(.scratch_y); + + .bss : { + . = ALIGN(4); + __bss_start__ = .; + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.bss*))) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (COPY): + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack*_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later + * + * stack1 section may be empty/missing if platform_launch_core1 is not used */ + + /* by default we put core 0 stack at the end of scratch Y, so that if core 1 + * stack is not used then all of SCRATCH_X is free. + */ + .stack1_dummy (COPY): + { + *(.stack1*) + } > SCRATCH_X + .stack_dummy (COPY): + { + *(.stack*) + } > SCRATCH_Y + + .flash_end : { + __flash_binary_end = .; + } > FLASH_FIRMWARE + + /* stack limit is poorly named, but historically is maximum heap ptr */ + __StackLimit = ORIGIN(RAM) + LENGTH(RAM); + __StackOneTop = ORIGIN(SCRATCH_X) + LENGTH(SCRATCH_X); + __StackTop = ORIGIN(SCRATCH_Y) + LENGTH(SCRATCH_Y); + __StackOneBottom = __StackOneTop - SIZEOF(.stack1_dummy); + __StackBottom = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed") + /* todo assert on extra code */ +} diff --git a/ports/raspberrypi/mpconfigport.h b/ports/raspberrypi/mpconfigport.h new file mode 100644 index 0000000000..7431519317 --- /dev/null +++ b/ports/raspberrypi/mpconfigport.h @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef __INCLUDED_MPCONFIGPORT_H +#define __INCLUDED_MPCONFIGPORT_H + +#define CIRCUITPY_INTERNAL_NVM_SIZE 0 + +#define CIRCUITPY_DEFAULT_STACK_SIZE (24*1024) + +#define MICROPY_USE_INTERNAL_PRINTF (1) + +#define CIRCUITPY_PROCESSOR_COUNT (2) + +// This also includes mpconfigboard.h. +#include "py/circuitpy_mpconfig.h" + +#define MICROPY_PORT_ROOT_POINTERS \ + CIRCUITPY_COMMON_ROOT_POINTERS; + +#endif // __INCLUDED_MPCONFIGPORT_H diff --git a/ports/raspberrypi/mpconfigport.mk b/ports/raspberrypi/mpconfigport.mk new file mode 100644 index 0000000000..138896d41c --- /dev/null +++ b/ports/raspberrypi/mpconfigport.mk @@ -0,0 +1,47 @@ +# Define an equivalent for MICROPY_LONGINT_IMPL, to pass to $(MPY-TOOL) in py/mkrules.mk +# $(MPY-TOOL) needs to know what kind of longint to use (if any) to freeze long integers. +# This should correspond to the MICROPY_LONGINT_IMPL definition in mpconfigport.h. + +ifeq ($(LONGINT_IMPL),NONE) +MPY_TOOL_LONGINT_IMPL = -mlongint-impl=none +endif + +ifeq ($(LONGINT_IMPL),MPZ) +MPY_TOOL_LONGINT_IMPL = -mlongint-impl=mpz +endif + +ifeq ($(LONGINT_IMPL),LONGLONG) +MPY_TOOL_LONGINT_IMPL = -mlongint-impl=longlong +endif + +# All raspberrypi ports have longints. +LONGINT_IMPL = MPZ + +ifndef CIRCUITPY_RP2PIO +CIRCUITPY_RP2PIO = 1 +else +CIRCUITPY_NEOPIXEL_WRITE = 0 +endif + +CIRCUITPY_FULL_BUILD = 1 +CIRCUITPY_PWMIO = 1 + +# Things that need to be implemented. +CIRCUITPY_AUDIOBUSIO = 0 # Use PIO interally for I2S +CIRCUITPY_AUDIOMP3 = 0 +CIRCUITPY_COUNTIO = 0 # Use PWM interally +CIRCUITPY_FREQUENCYIO = 0 # Use PWM interally +CIRCUITPY_I2CPERIPHERAL = 0 +CIRCUITPY_NVM = 0 +CIRCUITPY_PULSEIO = 0 # Use PIO interally +CIRCUITPY_ROTARYIO = 0 # Use PIO interally +CIRCUITPY_RTC = 0 + +# Things that are unsupported by the hardware. +CIRCUITPY_AUDIOIO = 0 + +INTERNAL_LIBM = 1 + +USB_SERIAL_NUMBER_LENGTH = 32 + +USB_NUM_EP = 8 diff --git a/ports/raspberrypi/mphalport.c b/ports/raspberrypi/mphalport.c new file mode 100644 index 0000000000..89b597bc74 --- /dev/null +++ b/ports/raspberrypi/mphalport.c @@ -0,0 +1,57 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include + +#include "lib/mp-readline/readline.h" +#include "lib/utils/interrupt_char.h" +#include "py/mphal.h" +#include "py/mpstate.h" +#include "py/runtime.h" +#include "py/smallint.h" +#include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/time/__init__.h" +#include "supervisor/shared/autoreload.h" + +#include "mpconfigboard.h" +#include "mphalport.h" +#include "supervisor/shared/tick.h" + +#include "src/rp2_common/hardware_timer/include/hardware/timer.h" + +extern uint32_t common_hal_mcu_processor_get_frequency(void); + +void mp_hal_delay_us(mp_uint_t delay) { + busy_wait_us_32(delay); +} + +void mp_hal_disable_all_interrupts(void) { + common_hal_mcu_disable_interrupts(); +} + +void mp_hal_enable_all_interrupts(void) { + common_hal_mcu_enable_interrupts(); +} diff --git a/ports/raspberrypi/mphalport.h b/ports/raspberrypi/mphalport.h new file mode 100644 index 0000000000..8d2d7d51a2 --- /dev/null +++ b/ports/raspberrypi/mphalport.h @@ -0,0 +1,50 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_MPHALPORT_H +#define MICROPY_INCLUDED_RASPBERRYPI_MPHALPORT_H + +#include "py/obj.h" + +#include "lib/oofatfs/ff.h" + +#include "supervisor/shared/tick.h" + +// Global millisecond tick count (driven by SysTick interrupt). +#define mp_hal_ticks_ms() ((mp_uint_t) supervisor_ticks_ms32()) + +// Number of bytes in receive buffer +extern volatile uint8_t usb_rx_count; +extern volatile bool mp_cdc_enabled; + +int receive_usb(void); + +void mp_hal_set_interrupt_char(int c); + +void mp_hal_disable_all_interrupts(void); +void mp_hal_enable_all_interrupts(void); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_MPHALPORT_H diff --git a/ports/raspberrypi/peripherals/pins.c b/ports/raspberrypi/peripherals/pins.c new file mode 100644 index 0000000000..a2a7b85bd3 --- /dev/null +++ b/ports/raspberrypi/peripherals/pins.c @@ -0,0 +1,67 @@ +/* + * This file is part of the Micro Python project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "pins.h" + +#include "shared-bindings/microcontroller/Pin.h" + +// This macro is used to simplify pin definition in boards//pins.c +#define PIN(p_number) \ +const mcu_pin_obj_t pin_GPIO## p_number = { \ + { &mcu_pin_type }, \ + .number = p_number \ +} + +PIN(0); +PIN(1); +PIN(2); +PIN(3); +PIN(4); +PIN(5); +PIN(6); +PIN(7); +PIN(8); +PIN(9); +PIN(10); +PIN(11); +PIN(12); +PIN(13); +PIN(14); +PIN(15); +PIN(16); +PIN(17); +PIN(18); +PIN(19); +PIN(20); +PIN(21); +PIN(22); +PIN(23); +PIN(24); +PIN(25); +PIN(26); +PIN(27); +PIN(28); +PIN(29); diff --git a/ports/raspberrypi/peripherals/pins.h b/ports/raspberrypi/peripherals/pins.h new file mode 100644 index 0000000000..99ab9cfe48 --- /dev/null +++ b/ports/raspberrypi/peripherals/pins.h @@ -0,0 +1,71 @@ +/* + * This file is part of the Micro Python project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +// DO NOT include this file directly. Use shared-bindings/microcontroller/Pin.h instead to ensure +// that all necessary includes are already included. + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_PERIPHERALS_PINS_H +#define MICROPY_INCLUDED_RASPBERRYPI_PERIPHERALS_PINS_H + +#include "py/obj.h" + +typedef struct { + mp_obj_base_t base; + uint8_t number; +} mcu_pin_obj_t; + +extern const mcu_pin_obj_t pin_GPIO0; +extern const mcu_pin_obj_t pin_GPIO1; +extern const mcu_pin_obj_t pin_GPIO2; +extern const mcu_pin_obj_t pin_GPIO3; +extern const mcu_pin_obj_t pin_GPIO4; +extern const mcu_pin_obj_t pin_GPIO5; +extern const mcu_pin_obj_t pin_GPIO6; +extern const mcu_pin_obj_t pin_GPIO7; +extern const mcu_pin_obj_t pin_GPIO8; +extern const mcu_pin_obj_t pin_GPIO9; +extern const mcu_pin_obj_t pin_GPIO10; +extern const mcu_pin_obj_t pin_GPIO11; +extern const mcu_pin_obj_t pin_GPIO12; +extern const mcu_pin_obj_t pin_GPIO13; +extern const mcu_pin_obj_t pin_GPIO14; +extern const mcu_pin_obj_t pin_GPIO15; +extern const mcu_pin_obj_t pin_GPIO16; +extern const mcu_pin_obj_t pin_GPIO17; +extern const mcu_pin_obj_t pin_GPIO18; +extern const mcu_pin_obj_t pin_GPIO19; +extern const mcu_pin_obj_t pin_GPIO20; +extern const mcu_pin_obj_t pin_GPIO21; +extern const mcu_pin_obj_t pin_GPIO22; +extern const mcu_pin_obj_t pin_GPIO23; +extern const mcu_pin_obj_t pin_GPIO24; +extern const mcu_pin_obj_t pin_GPIO25; +extern const mcu_pin_obj_t pin_GPIO26; +extern const mcu_pin_obj_t pin_GPIO27; +extern const mcu_pin_obj_t pin_GPIO28; +extern const mcu_pin_obj_t pin_GPIO29; + +#endif // MICROPY_INCLUDED_RASPBERRYPI_PERIPHERALS_PINS_H diff --git a/ports/raspberrypi/qstrdefsport.h b/ports/raspberrypi/qstrdefsport.h new file mode 100644 index 0000000000..3ba897069b --- /dev/null +++ b/ports/raspberrypi/qstrdefsport.h @@ -0,0 +1 @@ +// qstrs specific to this port diff --git a/ports/raspberrypi/sdk b/ports/raspberrypi/sdk new file mode 160000 index 0000000000..26653ea81e --- /dev/null +++ b/ports/raspberrypi/sdk @@ -0,0 +1 @@ +Subproject commit 26653ea81e340cacee55025d110c3e014a252a87 diff --git a/ports/raspberrypi/sdk_config/pico/config_autogen.h b/ports/raspberrypi/sdk_config/pico/config_autogen.h new file mode 100644 index 0000000000..688f367c34 --- /dev/null +++ b/ports/raspberrypi/sdk_config/pico/config_autogen.h @@ -0,0 +1,19 @@ +#pragma once + +#define PICO_IE_26_29_UNCHANGED_ON_RESET (0) +#define PICO_USE_STACK_GUARDS (0) +#define PICO_ENTER_USB_BOOT_ON_EXIT (0) +#define PICO_USE_OPTIMISTIC_SBRK (0) +#define PICO_NO_HARDWARE (0) +#define PICO_ON_DEVICE (1) +#define PICO_USE_CRT_PRINTF (0) +#define PICO_NO_PRINTF (0) +#define PICO_FLOAT_SUPPORT_ROM_V1 (1) +#define PICO_DOUBLE_SUPPORT_ROM_V1 (1) +#define PICO_STDIO_UART (0) +#define PICO_STDIO_USB (0) +#define PICO_STDIO_SEMIHOSTING (0) +#define PICO_STDIO_IGNORE_NESTED_STDOUT (0) +#define PICO_PRINTF_PICO (0) +#define PICO_PRINTF_NONE (0) +#define PICO_PRINTF_ALWAYS_INCLUDED (1) diff --git a/ports/raspberrypi/sdk_config/pico/version.h b/ports/raspberrypi/sdk_config/pico/version.h new file mode 100644 index 0000000000..3a1e1a3d27 --- /dev/null +++ b/ports/raspberrypi/sdk_config/pico/version.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +// ---------------------------------------------------------- +// THIS FILE IS (NOT) AUTOGENERATED; EDIT when updating sdk/ +// ---------------------------------------------------------- + +#ifndef _PICO_VERSION_H +#define _PICO_VERSION_H + +#define PICO_SDK_VERSION_MAJOR 1 +#define PICO_SDK_VERSION_MINOR 0 +#define PICO_SDK_VERSION_REVISION 0 +#define PICO_SDK_VERSION_STRING "1.0.0" + +#endif diff --git a/ports/raspberrypi/supervisor/internal_flash.c b/ports/raspberrypi/supervisor/internal_flash.c new file mode 100644 index 0000000000..d333830de9 --- /dev/null +++ b/ports/raspberrypi/supervisor/internal_flash.c @@ -0,0 +1,131 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "supervisor/internal_flash.h" + +#include +#include +#include + +#include "extmod/vfs.h" +#include "extmod/vfs_fat.h" +#include "py/mphal.h" +#include "py/obj.h" +#include "py/runtime.h" +#include "lib/oofatfs/ff.h" +#include "shared-bindings/microcontroller/__init__.h" + +#include "supervisor/usb.h" + +#include "src/rp2040/hardware_structs/include/hardware/structs/sio.h" +#include "src/rp2_common/hardware_flash/include/hardware/flash.h" +#include "src/common/pico_binary_info/include/pico/binary_info.h" + +#define RESERVED_FLASH 1 * 1024 * 1024 + +// TODO: Parameterize flash size based on the configured flash. +#define TOTAL_FLASH_SIZE 2 * 1024 * 1024 + +// TODO: Split the caching out of supervisor/shared/external_flash so we can use it. +#define SECTOR_SIZE 4096 +#define NO_CACHE 0xffffffff +STATIC uint8_t _cache[SECTOR_SIZE]; +STATIC uint32_t _cache_lba = NO_CACHE; + +void supervisor_flash_init(void) { + bi_decl_if_func_used(bi_block_device( + BINARY_INFO_MAKE_TAG('C', 'P'), + "CircuitPython", + RESERVED_FLASH, + TOTAL_FLASH_SIZE - RESERVED_FLASH, + NULL, + BINARY_INFO_BLOCK_DEV_FLAG_READ | + BINARY_INFO_BLOCK_DEV_FLAG_WRITE | + BINARY_INFO_BLOCK_DEV_FLAG_PT_UNKNOWN)); +} + +uint32_t supervisor_flash_get_block_size(void) { + return FILESYSTEM_BLOCK_SIZE; +} + +uint32_t supervisor_flash_get_block_count(void) { + return (TOTAL_FLASH_SIZE - RESERVED_FLASH) / FILESYSTEM_BLOCK_SIZE; +} + +void port_internal_flash_flush(void) { + if (_cache_lba == NO_CACHE) { + return; + } + common_hal_mcu_disable_interrupts(); + flash_range_erase(RESERVED_FLASH + _cache_lba, SECTOR_SIZE); + flash_range_program(RESERVED_FLASH + _cache_lba, _cache, SECTOR_SIZE); + common_hal_mcu_enable_interrupts(); + _cache_lba = NO_CACHE; +} + +mp_uint_t supervisor_flash_read_blocks(uint8_t *dest, uint32_t block, uint32_t num_blocks) { + memcpy(dest, + (void*)(XIP_BASE + RESERVED_FLASH + block * FILESYSTEM_BLOCK_SIZE), + num_blocks * FILESYSTEM_BLOCK_SIZE); + return 0; +} + +mp_uint_t supervisor_flash_write_blocks(const uint8_t *src, uint32_t lba, uint32_t num_blocks) { + uint32_t blocks_per_sector = SECTOR_SIZE / FILESYSTEM_BLOCK_SIZE; + uint32_t block = 0; + while (block < num_blocks) { + uint32_t block_address = lba + block; + uint32_t sector_offset = block_address / blocks_per_sector * SECTOR_SIZE; + uint8_t block_offset = block_address % blocks_per_sector; + + if (_cache_lba != block_address) { + memcpy(_cache, + (void*)(XIP_BASE + RESERVED_FLASH + sector_offset), + SECTOR_SIZE); + _cache_lba = sector_offset; + } + for (uint8_t b = block_offset; b < blocks_per_sector; b++) { + // Stop copying after the last block. + if (block >= num_blocks) { + break; + } + memcpy(_cache + b * FILESYSTEM_BLOCK_SIZE, + src + block * FILESYSTEM_BLOCK_SIZE, + FILESYSTEM_BLOCK_SIZE); + block++; + } + // Make sure we don't have an interrupt while we do flash operations. + common_hal_mcu_disable_interrupts(); + flash_range_erase(RESERVED_FLASH + sector_offset, SECTOR_SIZE); + flash_range_program(RESERVED_FLASH + sector_offset, _cache, SECTOR_SIZE); + common_hal_mcu_enable_interrupts(); + } + + return 0; // success +} + +void supervisor_flash_release_cache(void) { +} diff --git a/ports/raspberrypi/supervisor/internal_flash.h b/ports/raspberrypi/supervisor/internal_flash.h new file mode 100644 index 0000000000..0dc9f15458 --- /dev/null +++ b/ports/raspberrypi/supervisor/internal_flash.h @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef MICROPY_INCLUDED_RASPBERRYPI_INTERNAL_FLASH_H +#define MICROPY_INCLUDED_RASPBERRYPI_INTERNAL_FLASH_H + +#include + +#include "mpconfigport.h" + +// #define INTERNAL_FLASH_PART1_NUM_BLOCKS (CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE / FILESYSTEM_BLOCK_SIZE) + +// #define INTERNAL_FLASH_SYSTICK_MASK (0x1ff) // 512ms +// #define INTERNAL_FLASH_IDLE_TICK(tick) (((tick) & INTERNAL_FLASH_SYSTICK_MASK) == 2) + +#endif // MICROPY_INCLUDED_RASPBERRYPI_INTERNAL_FLASH_H diff --git a/ports/raspberrypi/supervisor/internal_flash_root_pointers.h b/ports/raspberrypi/supervisor/internal_flash_root_pointers.h new file mode 100644 index 0000000000..419a4c9435 --- /dev/null +++ b/ports/raspberrypi/supervisor/internal_flash_root_pointers.h @@ -0,0 +1,31 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#ifndef MICROPY_INCLUDED_RASPBERRYPI_INTERNAL_FLASH_ROOT_POINTERS_H +#define MICROPY_INCLUDED_RASPBERRYPI_INTERNAL_FLASH_ROOT_POINTERS_H + +#define FLASH_ROOT_POINTERS + +#endif // MICROPY_INCLUDED_RASPBERRYPI_INTERNAL_FLASH_ROOT_POINTERS_H diff --git a/ports/raspberrypi/supervisor/port.c b/ports/raspberrypi/supervisor/port.c new file mode 100644 index 0000000000..b2f73c7b4c --- /dev/null +++ b/ports/raspberrypi/supervisor/port.c @@ -0,0 +1,200 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include +#include + +#include "supervisor/board.h" +#include "supervisor/port.h" + +#include "bindings/rp2pio/StateMachine.h" +#include "genhdr/mpversion.h" +#include "shared-bindings/busio/I2C.h" +#include "shared-bindings/busio/SPI.h" +#include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/rtc/__init__.h" +#include "shared-bindings/pwmio/PWMOut.h" + +#include "supervisor/shared/safe_mode.h" +#include "supervisor/shared/stack.h" +#include "supervisor/shared/tick.h" + +#include "src/rp2040/hardware_structs/include/hardware/structs/watchdog.h" +#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" +#include "src/rp2_common/hardware_uart/include/hardware/uart.h" +#include "src/rp2_common/hardware_sync/include/hardware/sync.h" +#include "src/rp2_common/hardware_timer/include/hardware/timer.h" +#include "src/common/pico_time/include/pico/time.h" +#include "src/common/pico_binary_info/include/pico/binary_info.h" + +#include "tusb.h" + + +extern volatile bool mp_msc_enabled; + +STATIC void _tick_callback(uint alarm_num); + +STATIC void _binary_info(void) { + // Binary info readable with `picotool`. + bi_decl(bi_program_name("CircuitPython")); + bi_decl(bi_program_version_string(MICROPY_GIT_TAG)); + bi_decl(bi_program_build_date_string(MICROPY_BUILD_DATE)); + bi_decl(bi_program_url("https://circuitpython.org")); + + bi_decl(bi_program_build_attribute("BOARD=" CIRCUITPY_BOARD_ID)); + // TODO: Add build attribute for debug builds. Needs newer CircuitPython with CIRCUITPY_DEBUG. +} + +safe_mode_t port_init(void) { + _binary_info(); + // Set brown out. + + // Reset everything into a known state before board_init. + reset_port(); + + // For the tick. + hardware_alarm_claim(0); + hardware_alarm_set_callback(0, _tick_callback); + + // Check brownout. + + if (board_requests_safe_mode()) { + return USER_SAFE_MODE; + } + + return NO_SAFE_MODE; +} + +void reset_port(void) { + #if CIRCUITPY_BUSIO + reset_i2c(); + reset_spi(); + #endif + + #if CIRCUITPY_RP2PIO + reset_rp2pio_statemachine(); + #endif + + #if CIRCUITPY_PWMIO + pwmout_reset(); + #endif + + reset_all_pins(); +} + +void reset_to_bootloader(void) { + // reset(); + while (true) {} +} + +void reset_cpu(void) { + // reset(); + while (true) {} +} + +bool port_has_fixed_stack(void) { + return false; +} + +// From the linker script +extern uint32_t __HeapLimit; +extern uint32_t __StackTop; +uint32_t *port_stack_get_limit(void) { + return &__HeapLimit; +} + +uint32_t *port_stack_get_top(void) { + return &__StackTop; +} + +uint32_t *port_heap_get_bottom(void) { + return port_stack_get_limit(); +} + +uint32_t *port_heap_get_top(void) { + return port_stack_get_top(); +} + +void port_set_saved_word(uint32_t value) { + // NOTE: This doesn't survive pressing the reset button (aka toggling RUN). + watchdog_hw->scratch[0] = value; +} + +uint32_t port_get_saved_word(void) { + return watchdog_hw->scratch[0]; +} + +uint64_t port_get_raw_ticks(uint8_t* subticks) { + uint64_t microseconds = time_us_64(); + return 1024 * (microseconds / 1000000) + (microseconds % 1000000) / 977; +} + +STATIC void _tick_callback(uint alarm_num) { + supervisor_tick(); + hardware_alarm_set_target(0, delayed_by_us(get_absolute_time(), 977)); +} + +// Enable 1/1024 second tick. +void port_enable_tick(void) { + hardware_alarm_set_target(0, delayed_by_us(get_absolute_time(), 977)); +} + +// Disable 1/1024 second tick. +void port_disable_tick(void) { + // hardware_alarm_cancel(0); +} + +// This is called by sleep, we ignore it when our ticks are enabled because +// they'll wake us up earlier. If we don't, we'll mess up ticks by overwriting +// the next RTC wake up time. +void port_interrupt_after_ticks(uint32_t ticks) { +} + +void port_idle_until_interrupt(void) { + common_hal_mcu_disable_interrupts(); + if (!tud_task_event_ready()) { +// asm volatile ("dsb 0xF":::"memory"); +// __wfi(); + } + common_hal_mcu_enable_interrupts(); +} + +/** + * \brief Default interrupt handler for unused IRQs. + */ +__attribute__((used)) void HardFault_Handler(void) +{ +#ifdef ENABLE_MICRO_TRACE_BUFFER + // Turn off the micro trace buffer so we don't fill it up in the infinite + // loop below. + REG_MTB_MASTER = 0x00000000 + 6; +#endif + + reset_into_safe_mode(HARD_CRASH); + while (true) { + asm("nop;"); + } +} diff --git a/ports/raspberrypi/supervisor/rp2_cpu.s b/ports/raspberrypi/supervisor/rp2_cpu.s new file mode 100755 index 0000000000..741bb21358 --- /dev/null +++ b/ports/raspberrypi/supervisor/rp2_cpu.s @@ -0,0 +1,35 @@ +.syntax unified +.cpu cortex-m0 +.thumb +.text +.align 2 + +@ uint cpu_get_regs_and_sp(r0=uint regs[10]) +.global cpu_get_regs_and_sp +.thumb +.thumb_func +.type cpu_get_regs_and_sp, %function +cpu_get_regs_and_sp: +@ store registers into given array +str r4, [r0, #0] +str r5, [r0, #4] +str r6, [r0, #8] +str r7, [r0, #12] +push {r1} +mov r1, r8 +str r1, [r0, #16] +mov r1, r9 +str r1, [r0, #20] +mov r1, r10 +str r1, [r0, #24] +mov r1, r11 +str r1, [r0, #28] +mov r1, r12 +str r1, [r0, #32] +mov r1, r13 +str r1, [r0, #36] +pop {r1} + +@ return the sp +mov r0, sp +bx lr diff --git a/ports/raspberrypi/supervisor/usb.c b/ports/raspberrypi/supervisor/usb.c new file mode 100644 index 0000000000..1d2425aed2 --- /dev/null +++ b/ports/raspberrypi/supervisor/usb.c @@ -0,0 +1,53 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "lib/tinyusb/src/device/usbd.h" +#include "supervisor/background_callback.h" +#include "supervisor/usb.h" +#include "src/rp2_common/hardware_irq/include/hardware/irq.h" +#include "src/rp2_common/pico_platform/include/pico/platform.h" +#include "src/rp2040/hardware_regs/include/hardware/regs/intctrl.h" + +static background_callback_t usb_callback; +static void usb_background_do(void* unused) { + usb_background(); +} + +static void queue_background(void) { + background_callback_add(&usb_callback, usb_background_do, NULL); +} + +void init_usb_hardware(void) { +} + +void post_usb_init(void) { + irq_handler_t usb_handler = irq_get_exclusive_handler(USBCTRL_IRQ); + if (usb_handler) { + irq_remove_handler(USBCTRL_IRQ, usb_handler); + irq_add_shared_handler(USBCTRL_IRQ, usb_handler, PICO_DEFAULT_IRQ_PRIORITY); + } + irq_add_shared_handler(USBCTRL_IRQ, queue_background, PICO_LOWEST_IRQ_PRIORITY); +} diff --git a/ports/stm/boards/espruino_pico/mpconfigboard.mk b/ports/stm/boards/espruino_pico/mpconfigboard.mk index 14f9323fde..81c3772e72 100644 --- a/ports/stm/boards/espruino_pico/mpconfigboard.mk +++ b/ports/stm/boards/espruino_pico/mpconfigboard.mk @@ -20,5 +20,6 @@ LD_FILE = boards/STM32F401xd_fs.ld # lto for this port, and if other stuff hasn't been added in the # meantime CIRCUITPY_ULAB = 0 +CIRCUITPY_BUSDEVICE = 0 SUPEROPT_GC = 0 diff --git a/ports/stm/boards/stm32f411ce_blackpill_with_flash/board.c b/ports/stm/boards/stm32f411ce_blackpill_with_flash/board.c new file mode 100644 index 0000000000..f8e462f938 --- /dev/null +++ b/ports/stm/boards/stm32f411ce_blackpill_with_flash/board.c @@ -0,0 +1,39 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "supervisor/board.h" +#include "mpconfigboard.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.h b/ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.h new file mode 100644 index 0000000000..65e224e47a --- /dev/null +++ b/ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.h @@ -0,0 +1,52 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +//Micropython setup + +#define MICROPY_HW_BOARD_NAME "stm32f411ce-blackpill-with-flash" +#define MICROPY_HW_MCU_NAME "STM32F411CE" + +#define FLASH_SIZE (0x80000) +#define FLASH_PAGE_SIZE (0x4000) + +#define HSE_VALUE ((uint32_t)25000000) +#define BOARD_NO_VBUS_SENSE (1) +#define BOARD_HAS_LOW_SPEED_CRYSTAL (0) + +// On-board flash +#define SPI_FLASH_MOSI_PIN (&pin_PA07) +#define SPI_FLASH_MISO_PIN (&pin_PA06) +#define SPI_FLASH_SCK_PIN (&pin_PA05) +#define SPI_FLASH_CS_PIN (&pin_PA04) + +#define DEFAULT_I2C_BUS_SCL (&pin_PB06) +#define DEFAULT_I2C_BUS_SDA (&pin_PB07) + +#define CIRCUITPY_AUTORELOAD_DELAY_MS (500) + +#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x2000 - 0xC000) + +#define AUTORESET_DELAY_MS (500) diff --git a/ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.mk b/ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.mk new file mode 100644 index 0000000000..9a95a3539c --- /dev/null +++ b/ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.mk @@ -0,0 +1,19 @@ +USB_VID = 0x239A +USB_PID = 0x006A +USB_PRODUCT = "stm32f411ce blackpill with flash" +USB_MANUFACTURER = "Unknown" + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 2 +#See supervisor/shared/external_flash/devices.h for options +EXTERNAL_FLASH_DEVICES = W25Q64FV,W25Q64JV_IQ +LONGINT_IMPL = MPZ + +INTERNAL_FLASH_FILESYSTEM = 0 + +MCU_SERIES = F4 +MCU_VARIANT = STM32F411xE +MCU_PACKAGE = UFQFPN48 + +LD_COMMON = boards/common_default.ld +LD_FILE = boards/STM32F411_nvm_nofs.ld diff --git a/ports/stm/boards/stm32f411ce_blackpill_with_flash/pins.c b/ports/stm/boards/stm32f411ce_blackpill_with_flash/pins.c new file mode 100644 index 0000000000..16946b8bee --- /dev/null +++ b/ports/stm/boards/stm32f411ce_blackpill_with_flash/pins.c @@ -0,0 +1,44 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR_B12), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_B13), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_B14), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_B15), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PA09) }, //USB (shouldn't be used) + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PA10) }, //USB (shouldn't be used) + { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_PA11) }, //USB (shouldn't be used) + { MP_ROM_QSTR(MP_QSTR_A12), MP_ROM_PTR(&pin_PA12) }, //USB (shouldn't be used) + { MP_ROM_QSTR(MP_QSTR_A15), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_B3), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_B4), MP_ROM_PTR(&pin_PB04) }, + { MP_ROM_QSTR(MP_QSTR_B5), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_B6), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_B7), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_B8), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_B9), MP_ROM_PTR(&pin_PB09) }, + + { MP_ROM_QSTR(MP_QSTR_B10), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_B2), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_B1), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_B0), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_C15), MP_ROM_PTR(&pin_PC15) }, + { MP_ROM_QSTR(MP_QSTR_C14), MP_ROM_PTR(&pin_PC14) }, + { MP_ROM_QSTR(MP_QSTR_C13), MP_ROM_PTR(&pin_PC13) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PC13) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB06) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/stm/mpconfigport.h b/ports/stm/mpconfigport.h index 9489b47657..7cdab04f62 100644 --- a/ports/stm/mpconfigport.h +++ b/ports/stm/mpconfigport.h @@ -31,9 +31,7 @@ #include #define MICROPY_PY_FUNCTION_ATTRS (1) -#define MICROPY_PY_IO (1) #define MICROPY_PY_REVERSE_SPECIAL_METHODS (1) -#define MICROPY_PY_UJSON (1) extern uint8_t _ld_default_stack_size; diff --git a/py/builtinhelp.c b/py/builtinhelp.c index d12e088d60..e1dcb60962 100644 --- a/py/builtinhelp.c +++ b/py/builtinhelp.c @@ -152,9 +152,18 @@ STATIC void mp_help_print_obj(const mp_obj_t obj) { mp_obj_type_t *type = mp_obj_get_type(obj); // try to print something sensible about the given object - mp_print_str(MP_PYTHON_PRINTER, "object "); + const compressed_string_t* compressed = translate("object "); + char decompressed_object[decompress_length(compressed)]; + decompress(compressed, decompressed_object); + + mp_print_str(MP_PYTHON_PRINTER, decompressed_object); mp_obj_print(obj, PRINT_STR); - mp_printf(MP_PYTHON_PRINTER, " is of type %q\n", type->name); + + compressed = translate(" is of type %q\n"); + char decompressed_typestring[decompress_length(compressed)]; + decompress(compressed, decompressed_typestring); + + mp_printf(MP_PYTHON_PRINTER, decompressed_typestring, type->name); mp_map_t *map = NULL; if (type == &mp_type_module) { diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index 21bd5b9658..3ce7c01173 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -51,6 +51,7 @@ BASE_CFLAGS = \ -DCIRCUITPY_SOFTWARE_SAFE_MODE=0x0ADABEEF \ -DCIRCUITPY_CANARY_WORD=0xADAF00 \ -DCIRCUITPY_SAFE_RESTART_WORD=0xDEADBEEF \ + -DCIRCUITPY_BOARD_ID="\"$(BOARD)\"" \ --param max-inline-insns-single=500 # Use these flags to debug build times and header includes. @@ -234,6 +235,9 @@ endif ifeq ($(CIRCUITPY_RANDOM),1) SRC_PATTERNS += random/% endif +ifeq ($(CIRCUITPY_RP2PIO),1) +SRC_PATTERNS += rp2pio/% +endif ifeq ($(CIRCUITPY_ROTARYIO),1) SRC_PATTERNS += rotaryio/% endif diff --git a/py/circuitpy_mpconfig.h b/py/circuitpy_mpconfig.h index a3411b7adb..ee23c71569 100644 --- a/py/circuitpy_mpconfig.h +++ b/py/circuitpy_mpconfig.h @@ -195,21 +195,12 @@ typedef long mp_off_t; #define MICROPY_PY_BUILTINS_STR_CENTER (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_PARTITION (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_SPLITLINES (CIRCUITPY_FULL_BUILD) -#define MICROPY_PY_UERRNO (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_COLLECTIONS_ORDEREDDICT #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (CIRCUITPY_FULL_BUILD) #endif -#ifndef MICROPY_PY_UBINASCII -#define MICROPY_PY_UBINASCII (CIRCUITPY_FULL_BUILD) -#endif -// Opposite setting is deliberate. -#define MICROPY_PY_UERRNO_ERRORCODE (!CIRCUITPY_FULL_BUILD) -#ifndef MICROPY_PY_URE -#define MICROPY_PY_URE (CIRCUITPY_FULL_BUILD) -#endif -#define MICROPY_PY_URE_MATCH_GROUPS (CIRCUITPY_FULL_BUILD) -#define MICROPY_PY_URE_MATCH_SPAN_START_END (CIRCUITPY_FULL_BUILD) -#define MICROPY_PY_URE_SUB (CIRCUITPY_FULL_BUILD) +#define MICROPY_PY_URE_MATCH_GROUPS (CIRCUITPY_RE) +#define MICROPY_PY_URE_MATCH_SPAN_START_END (CIRCUITPY_RE) +#define MICROPY_PY_URE_SUB (CIRCUITPY_RE) // LONGINT_IMPL_xxx are defined in the Makefile. // @@ -228,7 +219,7 @@ typedef long mp_off_t; #endif #ifndef MICROPY_PY_REVERSE_SPECIAL_METHODS -#define MICROPY_PY_REVERSE_SPECIAL_METHODS (CIRCUITPY_FULL_BUILD) +#define MICROPY_PY_REVERSE_SPECIAL_METHODS (CIRCUITPY_ULAB || CIRCUITPY_FULL_BUILD) #endif #if INTERNAL_FLASH_FILESYSTEM == 0 && QSPI_FLASH_FILESYSTEM == 0 && SPI_FLASH_FILESYSTEM == 0 && !DISABLE_FILESYSTEM @@ -301,6 +292,13 @@ extern const struct _mp_obj_module_t audiopwmio_module; #define AUDIOPWMIO_MODULE #endif +#if CIRCUITPY_BINASCII +#define MICROPY_PY_UBINASCII CIRCUITPY_BINASCII +#define BINASCII_MODULE { MP_ROM_QSTR(MP_QSTR_binascii), MP_ROM_PTR(&mp_module_ubinascii) }, +#else +#define BINASCII_MODULE +#endif + #if CIRCUITPY_BITBANGIO #define BITBANGIO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_bitbangio), (mp_obj_t)&bitbangio_module }, extern const struct _mp_obj_module_t bitbangio_module; @@ -399,6 +397,16 @@ extern const struct _mp_obj_module_t terminalio_module; #define TERMINALIO_MODULE #endif +#if CIRCUITPY_ERRNO +#define MICROPY_PY_UERRNO (1) +// Uses about 80 bytes. +#define MICROPY_PY_UERRNO_ERRORCODE (1) +#define ERRNO_MODULE { MP_ROM_QSTR(MP_QSTR_errno), MP_ROM_PTR(&mp_module_uerrno) }, +#else +#define ERRNO_MODULE +# +#endif + #if CIRCUITPY_ESPIDF extern const struct _mp_obj_module_t espidf_module; #define ESPIDF_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_espidf),(mp_obj_t)&espidf_module }, @@ -470,6 +478,18 @@ extern const struct _mp_obj_module_t ipaddress_module; #define IPADDRESS_MODULE #endif +#if CIRCUITPY_JSON +#define MICROPY_PY_UJSON (1) +#define MICROPY_PY_IO (1) +#define JSON_MODULE { MP_ROM_QSTR(MP_QSTR_json), MP_ROM_PTR(&mp_module_ujson) }, +#else +#ifndef MICROPY_PY_IO +// We don't need MICROPY_PY_IO unless someone else wants it. +#define MICROPY_PY_IO (0) +#endif +#define JSON_MODULE +#endif + #if CIRCUITPY_MATH extern const struct _mp_obj_module_t math_module; #define MATH_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_math), (mp_obj_t)&math_module }, @@ -581,13 +601,6 @@ extern const struct _mp_obj_module_t pwmio_module; #define PWMIO_MODULE #endif -#if CIRCUITPY_RGBMATRIX -extern const struct _mp_obj_module_t rgbmatrix_module; -#define RGBMATRIX_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_rgbmatrix),(mp_obj_t)&rgbmatrix_module }, -#else -#define RGBMATRIX_MODULE -#endif - #if CIRCUITPY_RANDOM extern const struct _mp_obj_module_t random_module; #define RANDOM_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_random), (mp_obj_t)&random_module }, @@ -595,6 +608,20 @@ extern const struct _mp_obj_module_t random_module; #define RANDOM_MODULE #endif +#if CIRCUITPY_RE +#define MICROPY_PY_URE (1) +#define RE_MODULE { MP_ROM_QSTR(MP_QSTR_re), MP_ROM_PTR(&mp_module_ure) }, +#else +#define RE_MODULE +#endif + +#if CIRCUITPY_RGBMATRIX +extern const struct _mp_obj_module_t rgbmatrix_module; +#define RGBMATRIX_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_rgbmatrix),(mp_obj_t)&rgbmatrix_module }, +#else +#define RGBMATRIX_MODULE +#endif + #if CIRCUITPY_ROTARYIO extern const struct _mp_obj_module_t rotaryio_module; #define ROTARYIO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_rotaryio), (mp_obj_t)&rotaryio_module }, @@ -602,6 +629,13 @@ extern const struct _mp_obj_module_t rotaryio_module; #define ROTARYIO_MODULE #endif +#if CIRCUITPY_RP2PIO +extern const struct _mp_obj_module_t rp2pio_module; +#define RP2PIO_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_rp2pio),(mp_obj_t)&rp2pio_module }, +#else +#define RP2PIO_MODULE +#endif + #if CIRCUITPY_RTC extern const struct _mp_obj_module_t rtc_module; #define RTC_MODULE { MP_OBJ_NEW_QSTR(MP_QSTR_rtc), (mp_obj_t)&rtc_module }, @@ -723,25 +757,6 @@ extern const struct _mp_obj_module_t ustack_module; #define USTACK_MODULE #endif -// These modules are not yet in shared-bindings, but we prefer the non-uxxx names. -#if MICROPY_PY_UBINASCII -#define BINASCII_MODULE { MP_ROM_QSTR(MP_QSTR_binascii), MP_ROM_PTR(&mp_module_ubinascii) }, -#else -#define BINASCII_MODULE -#endif - -#if MICROPY_PY_UERRNO -#define ERRNO_MODULE { MP_ROM_QSTR(MP_QSTR_errno), MP_ROM_PTR(&mp_module_uerrno) }, -#else -#define ERRNO_MODULE -#endif - -#if MICROPY_PY_UJSON -#define JSON_MODULE { MP_ROM_QSTR(MP_QSTR_json), MP_ROM_PTR(&mp_module_ujson) }, -#else -#define JSON_MODULE -#endif - #if defined(CIRCUITPY_ULAB) && CIRCUITPY_ULAB // ulab requires reverse special methods #if defined(MICROPY_PY_REVERSE_SPECIAL_METHODS) && !MICROPY_PY_REVERSE_SPECIAL_METHODS @@ -753,12 +768,6 @@ extern const struct _mp_obj_module_t ustack_module; #define ULAB_MODULE #endif -#if MICROPY_PY_URE -#define RE_MODULE { MP_ROM_QSTR(MP_QSTR_re), MP_ROM_PTR(&mp_module_ure) }, -#else -#define RE_MODULE -#endif - // This is not a top-level module; it's microcontroller.watchdog. #if CIRCUITPY_WATCHDOG extern const struct _mp_obj_module_t watchdog_module; @@ -852,6 +861,7 @@ extern const struct _mp_obj_module_t msgpack_module; RE_MODULE \ RGBMATRIX_MODULE \ ROTARYIO_MODULE \ + RP2PIO_MODULE \ RTC_MODULE \ SAMD_MODULE \ SDCARDIO_MODULE \ @@ -928,12 +938,15 @@ void supervisor_run_background_tasks_if_tick(void); #define CIRCUITPY_PYSTACK_SIZE 1536 #endif - // Wait this long imediately after startup to see if we are connected to USB. #ifndef CIRCUITPY_USB_CONNECTED_SLEEP_DELAY #define CIRCUITPY_USB_CONNECTED_SLEEP_DELAY 5 #endif +#ifndef CIRCUITPY_PROCESSOR_COUNT +#define CIRCUITPY_PROCESSOR_COUNT (1) +#endif + #define CIRCUITPY_BOOT_OUTPUT_FILE "/boot_out.txt" #define CIRCUITPY_VERBOSE_BLE 0 diff --git a/py/circuitpy_mpconfig.mk b/py/circuitpy_mpconfig.mk index d0145a90f3..b8fe73eea9 100644 --- a/py/circuitpy_mpconfig.mk +++ b/py/circuitpy_mpconfig.mk @@ -86,6 +86,9 @@ endif endif CFLAGS += -DCIRCUITPY_AUDIOMP3=$(CIRCUITPY_AUDIOMP3) +CIRCUITPY_BINASCII ?= $(CIRCUITPY_FULL_BUILD) +CFLAGS += -DCIRCUITPY_BINASCII=$(CIRCUITPY_BINASCII) + CIRCUITPY_BITBANGIO ?= $(CIRCUITPY_FULL_BUILD) CFLAGS += -DCIRCUITPY_BITBANGIO=$(CIRCUITPY_BITBANGIO) @@ -100,7 +103,7 @@ CFLAGS += -DCIRCUITPY_BLEIO=$(CIRCUITPY_BLEIO) CIRCUITPY_BOARD ?= 1 CFLAGS += -DCIRCUITPY_BOARD=$(CIRCUITPY_BOARD) -CIRCUITPY_BUSDEVICE = 0 +CIRCUITPY_BUSDEVICE ?= $(CIRCUITPY_FULL_BUILD) CFLAGS += -DCIRCUITPY_BUSDEVICE=$(CIRCUITPY_BUSDEVICE) CIRCUITPY_BUILTINS_POW3 ?= $(CIRCUITPY_FULL_BUILD) @@ -124,6 +127,9 @@ CFLAGS += -DCIRCUITPY_COUNTIO=$(CIRCUITPY_COUNTIO) CIRCUITPY_DISPLAYIO ?= $(CIRCUITPY_FULL_BUILD) CFLAGS += -DCIRCUITPY_DISPLAYIO=$(CIRCUITPY_DISPLAYIO) +CIRCUITPY_ERRNO ?= $(CIRCUITPY_FULL_BUILD) +CFLAGS += -DCIRCUITPY_ERRNO=$(CIRCUITPY_ERRNO) + # CIRCUITPY_ESPIDF is handled in the esp32s2 tree. # Only for ESP32S chips. # Assume not a ESP build. @@ -158,6 +164,9 @@ CFLAGS += -DCIRCUITPY_I2CPERIPHERAL=$(CIRCUITPY_I2CPERIPHERAL) CIRCUITPY_IPADDRESS ?= $(CIRCUITPY_WIFI) CFLAGS += -DCIRCUITPY_IPADDRESS=$(CIRCUITPY_IPADDRESS) +CIRCUITPY_JSON ?= $(CIRCUITPY_FULL_BUILD) +CFLAGS += -DCIRCUITPY_JSON=$(CIRCUITPY_JSON) + CIRCUITPY_MATH ?= 1 CFLAGS += -DCIRCUITPY_MATH=$(CIRCUITPY_MATH) @@ -198,12 +207,21 @@ CFLAGS += -DCIRCUITPY_PULSEIO=$(CIRCUITPY_PULSEIO) # For now we tie PWMIO to PULSEIO so they always both exist. In CircuitPython 7 # we can enable and disable them separately once PWMOut is removed from `pulseio`. -CIRCUITPY_PWMIO = $(CIRCUITPY_PULSEIO) +CIRCUITPY_PWMIO ?= $(CIRCUITPY_PULSEIO) CFLAGS += -DCIRCUITPY_PWMIO=$(CIRCUITPY_PWMIO) CIRCUITPY_RANDOM ?= 1 CFLAGS += -DCIRCUITPY_RANDOM=$(CIRCUITPY_RANDOM) +CIRCUITPY_RE ?= $(CIRCUITPY_FULL_BUILD) +CFLAGS += -DCIRCUITPY_RE=$(CIRCUITPY_RE) + +# CIRCUITPY_RP2PIO is handled in the raspberrypi tree. +# Only for rp2 chips. +# Assume not a rp2 build. +CIRCUITPY_RP2PIO ?= 0 +CFLAGS += -DCIRCUITPY_RP2PIO=$(CIRCUITPY_RP2PIO) + CIRCUITPY_RGBMATRIX ?= 0 CFLAGS += -DCIRCUITPY_RGBMATRIX=$(CIRCUITPY_RGBMATRIX) diff --git a/shared-bindings/_eve/__init__.c b/shared-bindings/_eve/__init__.c index 0f628b6fb0..c043aa5fae 100644 --- a/shared-bindings/_eve/__init__.c +++ b/shared-bindings/_eve/__init__.c @@ -604,22 +604,6 @@ STATIC mp_obj_t _jump(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(jump_obj, _jump); -//| def LineWidth(self, width: int) -> None: -//| """Set the width of rasterized lines -//| -//| :param int width: line width in :math:`1/16` pixel. Range 0-4095. The initial value is 16 -//| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" -//| ... -//| - -STATIC mp_obj_t _linewidth(mp_obj_t self, mp_obj_t a0) { - uint32_t width = mp_obj_get_int_truncated(a0); - common_hal__eve_LineWidth(EVEHAL(self), width); - return mp_const_none; -} -STATIC MP_DEFINE_CONST_FUN_OBJ_2(linewidth_obj, _linewidth); - //| def Macro(self, m: int) -> None: //| """Execute a single command from a macro register //| @@ -662,22 +646,6 @@ STATIC mp_obj_t _palettesource(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(palettesource_obj, _palettesource); -//| def PointSize(self, size: int) -> None: -//| """Set the radius of rasterized points -//| -//| :param int size: point radius in :math:`1/16` pixel. Range 0-8191. The initial value is 16 -//| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" -//| ... -//| - -STATIC mp_obj_t _pointsize(mp_obj_t self, mp_obj_t a0) { - uint32_t size = mp_obj_get_int_truncated(a0); - common_hal__eve_PointSize(EVEHAL(self), size); - return mp_const_none; -} -STATIC MP_DEFINE_CONST_FUN_OBJ_2(pointsize_obj, _pointsize); - //| def RestoreContext(self) -> None: //| """Restore the current graphics context from the context stack""" //| ... @@ -836,48 +804,6 @@ STATIC mp_obj_t _tag(mp_obj_t self, mp_obj_t a0) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(tag_obj, _tag); -//| def VertexTranslateX(self, x: int) -> None: -//| """Set the vertex transformation's x translation component -//| -//| :param int x: signed x-coordinate in :math:`1/16` pixel. Range 0-131071. The initial value is 0 -//| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" -//| ... -//| - -STATIC mp_obj_t _vertextranslatex(mp_obj_t self, mp_obj_t a0) { - uint32_t x = mp_obj_get_int_truncated(a0); - common_hal__eve_VertexTranslateX(EVEHAL(self), x); - return mp_const_none; -} -STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertextranslatex_obj, _vertextranslatex); - -//| def VertexTranslateY(self, y: int) -> None: -//| """Set the vertex transformation's y translation component -//| -//| :param int y: signed y-coordinate in :math:`1/16` pixel. Range 0-131071. The initial value is 0 -//| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" -//| ... -//| - - -STATIC mp_obj_t _vertextranslatey(mp_obj_t self, mp_obj_t a0) { - uint32_t y = mp_obj_get_int_truncated(a0); - common_hal__eve_VertexTranslateY(EVEHAL(self), y); - return mp_const_none; -} -STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertextranslatey_obj, _vertextranslatey); - -//| def VertexFormat(self, frac: int) -> None: -//| """Set the precision of vertex2f coordinates -//| -//| :param int frac: Number of fractional bits in X,Y coordinates, 0-4. Range 0-7. The initial value is 4 -//| -//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" -//| ... -//| - STATIC mp_obj_t _vertexformat(mp_obj_t self, mp_obj_t a0) { uint32_t frac = mp_obj_get_int_truncated(a0); common_hal__eve_VertexFormat(EVEHAL(self), frac); @@ -975,6 +901,82 @@ STATIC mp_obj_t _vertex2f(mp_obj_t self, mp_obj_t a0, mp_obj_t a1) { } STATIC MP_DEFINE_CONST_FUN_OBJ_3(vertex2f_obj, _vertex2f); +//| def LineWidth(self, width: float) -> None: +//| """Set the width of rasterized lines +//| +//| :param float width: line width in pixels. Range 0-511. The initial value is 1 +//| +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... +//| + +STATIC mp_obj_t _linewidth(mp_obj_t self, mp_obj_t a0) { + mp_float_t width = mp_obj_get_float(a0); + common_hal__eve_LineWidth(EVEHAL(self), width); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(linewidth_obj, _linewidth); + +//| def PointSize(self, size: float) -> None: +//| """Set the diameter of rasterized points +//| +//| :param float size: point diameter in pixels. Range 0-1023. The initial value is 1 +//| +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... +//| + +STATIC mp_obj_t _pointsize(mp_obj_t self, mp_obj_t a0) { + mp_float_t size = mp_obj_get_float(a0); + common_hal__eve_PointSize(EVEHAL(self), size); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(pointsize_obj, _pointsize); + +//| def VertexTranslateX(self, x: float) -> None: +//| """Set the vertex transformation's x translation component +//| +//| :param float x: signed x-coordinate in pixels. Range ±4095. The initial value is 0 +//| +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... +//| + +STATIC mp_obj_t _vertextranslatex(mp_obj_t self, mp_obj_t a0) { + mp_float_t x = mp_obj_get_float(a0); + common_hal__eve_VertexTranslateX(EVEHAL(self), x); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertextranslatex_obj, _vertextranslatex); + +//| def VertexTranslateY(self, y: float) -> None: +//| """Set the vertex transformation's y translation component +//| +//| :param float y: signed y-coordinate in pixels. Range ±4095. The initial value is 0 +//| +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... +//| + + +STATIC mp_obj_t _vertextranslatey(mp_obj_t self, mp_obj_t a0) { + mp_float_t y = mp_obj_get_float(a0); + common_hal__eve_VertexTranslateY(EVEHAL(self), y); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(vertextranslatey_obj, _vertextranslatey); + +//| def VertexFormat(self, frac: int) -> None: +//| """Set the precision of vertex2f coordinates +//| +//| :param int frac: Number of fractional bits in X,Y coordinates, 0-4. Range 0-7. The initial value is 4 +//| +//| This value is part of the graphics context and is saved and restored by :meth:`SaveContext` and :meth:`RestoreContext`.""" +//| ... +//| + +//} + // Append an object x to the FIFO #define ADD_X(self, x) \ common_hal__eve_add(EVEHAL(self), sizeof(x), &(x)); diff --git a/shared-bindings/_eve/__init__.h b/shared-bindings/_eve/__init__.h index 759a629bbd..883b1a15bf 100644 --- a/shared-bindings/_eve/__init__.h +++ b/shared-bindings/_eve/__init__.h @@ -61,11 +61,11 @@ void common_hal__eve_ColorRGB(common_hal__eve_t *eve, uint32_t red, uint32_t gre void common_hal__eve_Display(common_hal__eve_t *eve); void common_hal__eve_End(common_hal__eve_t *eve); void common_hal__eve_Jump(common_hal__eve_t *eve, uint32_t dest); -void common_hal__eve_LineWidth(common_hal__eve_t *eve, uint32_t width); +void common_hal__eve_LineWidth(common_hal__eve_t *eve, mp_float_t width); void common_hal__eve_Macro(common_hal__eve_t *eve, uint32_t m); void common_hal__eve_Nop(common_hal__eve_t *eve); void common_hal__eve_PaletteSource(common_hal__eve_t *eve, uint32_t addr); -void common_hal__eve_PointSize(common_hal__eve_t *eve, uint32_t size); +void common_hal__eve_PointSize(common_hal__eve_t *eve, mp_float_t size); void common_hal__eve_RestoreContext(common_hal__eve_t *eve); void common_hal__eve_Return(common_hal__eve_t *eve); void common_hal__eve_SaveContext(common_hal__eve_t *eve); @@ -76,8 +76,8 @@ void common_hal__eve_StencilMask(common_hal__eve_t *eve, uint32_t mask); void common_hal__eve_StencilOp(common_hal__eve_t *eve, uint32_t sfail, uint32_t spass); void common_hal__eve_TagMask(common_hal__eve_t *eve, uint32_t mask); void common_hal__eve_Tag(common_hal__eve_t *eve, uint32_t s); -void common_hal__eve_VertexTranslateX(common_hal__eve_t *eve, uint32_t x); -void common_hal__eve_VertexTranslateY(common_hal__eve_t *eve, uint32_t y); +void common_hal__eve_VertexTranslateX(common_hal__eve_t *eve, mp_float_t x); +void common_hal__eve_VertexTranslateY(common_hal__eve_t *eve, mp_float_t y); void common_hal__eve_VertexFormat(common_hal__eve_t *eve, uint32_t frac); void common_hal__eve_Vertex2ii(common_hal__eve_t *eve, uint32_t x, uint32_t y, uint32_t handle, uint32_t cell); diff --git a/shared-bindings/adafruit_bus_device/I2CDevice.c b/shared-bindings/adafruit_bus_device/I2CDevice.c index a4c04e198c..15e8cc7063 100644 --- a/shared-bindings/adafruit_bus_device/I2CDevice.c +++ b/shared-bindings/adafruit_bus_device/I2CDevice.c @@ -76,7 +76,7 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_make_new(const mp_obj_type_t *type mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); - busio_i2c_obj_t* i2c = args[ARG_i2c].u_obj; + mp_obj_t* i2c = args[ARG_i2c].u_obj; common_hal_adafruit_bus_device_i2cdevice_construct(MP_OBJ_TO_PTR(self), i2c, args[ARG_device_address].u_int); if (args[ARG_probe].u_bool == true) { @@ -107,7 +107,7 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_obj___exit__(size_t n_args, const } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(adafruit_bus_device_i2cdevice___exit___obj, 4, 4, adafruit_bus_device_i2cdevice_obj___exit__); -//| def readinto(self, buf: WriteableBuffer, *, start: int = 0, end: int = 0) -> None: +//| def readinto(self, buf: WriteableBuffer, *, start: int = 0, end: Optional[int] = None) -> None: //| """Read into ``buf`` from the device. The number of bytes read will be the //| length of ``buf``. //| If ``start`` or ``end`` is provided, then the buffer will be sliced @@ -118,22 +118,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(adafruit_bus_device_i2cdevice___exit_ //| :param int end: Index to write up to but not include; if None, use ``len(buf)``""" //| ... //| -STATIC void readinto(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t buffer, int32_t start, mp_int_t end) { - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(buffer, &bufinfo, MP_BUFFER_WRITE); - - size_t length = bufinfo.len; - normalize_buffer_bounds(&start, end, &length); - if (length == 0) { - mp_raise_ValueError(translate("Buffer must be at least length 1")); - } - - uint8_t status = common_hal_adafruit_bus_device_i2cdevice_readinto(MP_OBJ_TO_PTR(self), ((uint8_t*)bufinfo.buf) + start, length); - if (status != 0) { - mp_raise_OSError(status); - } -} - STATIC mp_obj_t adafruit_bus_device_i2cdevice_readinto(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; static const mp_arg_t allowed_args[] = { @@ -147,12 +131,22 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_readinto(size_t n_args, const mp_o mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); - readinto(self, args[ARG_buffer].u_obj, args[ARG_start].u_int, args[ARG_end].u_int); + mp_obj_t dest[8]; + mp_load_method(self->i2c, MP_QSTR_readfrom_into, dest); + dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[3] = args[ARG_buffer].u_obj; + //dest[4] = mp_obj_new_str("start", 5); + dest[4] = MP_OBJ_NEW_QSTR(MP_QSTR_start); + dest[5] = mp_obj_new_int(args[ARG_start].u_int); + dest[6] = MP_OBJ_NEW_QSTR(MP_QSTR_end); + dest[7] = mp_obj_new_int(args[ARG_end].u_int); + mp_call_method_n_kw(2, 2, dest); + return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_KW(adafruit_bus_device_i2cdevice_readinto_obj, 2, adafruit_bus_device_i2cdevice_readinto); -//| def write(self, buf: ReadableBuffer, *, start: int = 0, end: int = 0) -> None: +//| def write(self, buf: ReadableBuffer, *, start: int = 0, end: Optional[int] = None) -> None: //| """Write the bytes from ``buffer`` to the device, then transmit a stop bit. //| If ``start`` or ``end`` is provided, then the buffer will be sliced //| as if ``buffer[start:end]``. This will not cause an allocation like @@ -163,22 +157,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_KW(adafruit_bus_device_i2cdevice_readinto_obj, 2, //| """ //| ... //| -STATIC void write(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t buffer, int32_t start, mp_int_t end, bool transmit_stop_bit) { - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(buffer, &bufinfo, MP_BUFFER_READ); - - size_t length = bufinfo.len; - normalize_buffer_bounds(&start, end, &length); - if (length == 0) { - mp_raise_ValueError(translate("Buffer must be at least length 1")); - } - - uint8_t status = common_hal_adafruit_bus_device_i2cdevice_write(MP_OBJ_TO_PTR(self), ((uint8_t*)bufinfo.buf) + start, length, transmit_stop_bit); - if (status != 0) { - mp_raise_OSError(status); - } -} - STATIC mp_obj_t adafruit_bus_device_i2cdevice_write(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_buffer, ARG_start, ARG_end }; static const mp_arg_t allowed_args[] = { @@ -191,13 +169,22 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_write(size_t n_args, const mp_obj_ mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); - write(self, args[ARG_buffer].u_obj, args[ARG_start].u_int, args[ARG_end].u_int, true); + mp_obj_t dest[8]; + mp_load_method(self->i2c, MP_QSTR_writeto, dest); + dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[3] = args[ARG_buffer].u_obj; + dest[4] = MP_OBJ_NEW_QSTR(MP_QSTR_start); + dest[5] = mp_obj_new_int(args[ARG_start].u_int); + dest[6] = MP_OBJ_NEW_QSTR(MP_QSTR_end); + dest[7] = mp_obj_new_int(args[ARG_end].u_int); + mp_call_method_n_kw(2, 2, dest); + return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_KW(adafruit_bus_device_i2cdevice_write_obj, 2, adafruit_bus_device_i2cdevice_write); -//| def write_then_readinto(self, out_buffer: WriteableBuffer, in_buffer: ReadableBuffer, *, out_start: int = 0, out_end: int = 0, in_start: int = 0, in_end: int = 0) -> None: +//| def write_then_readinto(self, out_buffer: WriteableBuffer, in_buffer: ReadableBuffer, *, out_start: int = 0, out_end: Optional[int] = None, in_start: int = 0, in_end: Optional[int] = None) -> None: //| """Write the bytes from ``out_buffer`` to the device, then immediately //| reads into ``in_buffer`` from the device. The number of bytes read //| will be the length of ``in_buffer``. @@ -233,9 +220,21 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_write_then_readinto(size_t n_args, mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); - write(self, args[ARG_out_buffer].u_obj, args[ARG_out_start].u_int, args[ARG_out_end].u_int, false); + mp_obj_t dest[13]; + mp_load_method(self->i2c, MP_QSTR_writeto_then_readfrom, dest); + dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[3] = args[ARG_out_buffer].u_obj; + dest[4] = args[ARG_in_buffer].u_obj; + dest[5] = MP_OBJ_NEW_QSTR(MP_QSTR_out_start); + dest[6] = mp_obj_new_int(args[ARG_out_start].u_int); + dest[7] = MP_OBJ_NEW_QSTR(MP_QSTR_out_end); + dest[8] = mp_obj_new_int(args[ARG_out_end].u_int); + dest[9] = MP_OBJ_NEW_QSTR(MP_QSTR_in_start); + dest[10] = mp_obj_new_int(args[ARG_in_start].u_int); + dest[11] = MP_OBJ_NEW_QSTR(MP_QSTR_in_end); + dest[12] = mp_obj_new_int(args[ARG_in_end].u_int); - readinto(self, args[ARG_in_buffer].u_obj, args[ARG_in_start].u_int, args[ARG_in_end].u_int); + mp_call_method_n_kw(3, 4, dest); return mp_const_none; } diff --git a/shared-bindings/adafruit_bus_device/I2CDevice.h b/shared-bindings/adafruit_bus_device/I2CDevice.h index cf7b1321a0..82ef1feb80 100644 --- a/shared-bindings/adafruit_bus_device/I2CDevice.h +++ b/shared-bindings/adafruit_bus_device/I2CDevice.h @@ -43,9 +43,7 @@ extern const mp_obj_type_t adafruit_bus_device_i2cdevice_type; // Initializes the hardware peripheral. -extern void common_hal_adafruit_bus_device_i2cdevice_construct(adafruit_bus_device_i2cdevice_obj_t *self, busio_i2c_obj_t *i2c, uint8_t device_address); -extern uint8_t common_hal_adafruit_bus_device_i2cdevice_readinto(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t buffer, size_t length); -extern uint8_t common_hal_adafruit_bus_device_i2cdevice_write(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t buffer, size_t length, bool transmit_stop_bit); +extern void common_hal_adafruit_bus_device_i2cdevice_construct(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t *i2c, uint8_t device_address); extern void common_hal_adafruit_bus_device_i2cdevice_lock(adafruit_bus_device_i2cdevice_obj_t *self); extern void common_hal_adafruit_bus_device_i2cdevice_unlock(adafruit_bus_device_i2cdevice_obj_t *self); extern void common_hal_adafruit_bus_device_i2cdevice_probe_for_device(adafruit_bus_device_i2cdevice_obj_t *self); diff --git a/shared-bindings/microcontroller/Pin.c b/shared-bindings/microcontroller/Pin.c index 6ba02a0e7d..2a97b54b3d 100644 --- a/shared-bindings/microcontroller/Pin.c +++ b/shared-bindings/microcontroller/Pin.c @@ -66,12 +66,12 @@ static void get_pin_name(const mcu_pin_obj_t *self, qstr* package, qstr* module, STATIC void mcu_pin_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) { mcu_pin_obj_t *self = MP_OBJ_TO_PTR(self_in); - qstr package; + qstr package = MP_QSTR_Pin; qstr module; - qstr name; + qstr name = MP_QSTR_Pin; get_pin_name(self, &package, &module, &name); - if (package){ + if (package) { mp_printf(print, "%q.%q.%q", package, module, name); } else { mp_printf(print, "%q.%q", module , name); @@ -131,7 +131,7 @@ void assert_pin_free(const mcu_pin_obj_t* pin) { if (pin != NULL && pin != MP_OBJ_TO_PTR(mp_const_none) && !common_hal_mcu_pin_is_free(pin)) { qstr package; qstr module; - qstr name; + qstr name = MP_QSTR_Pin; get_pin_name(pin, &package, &module, &name); mp_raise_ValueError_varg(translate("%q in use"), name); diff --git a/shared-bindings/microcontroller/__init__.h b/shared-bindings/microcontroller/__init__.h index 0dafc74c72..39d3e718b4 100644 --- a/shared-bindings/microcontroller/__init__.h +++ b/shared-bindings/microcontroller/__init__.h @@ -29,6 +29,7 @@ #include "py/obj.h" #include "py/mpconfig.h" +#include "py/objtuple.h" #include "common-hal/microcontroller/Processor.h" #include "shared-bindings/microcontroller/ResetReason.h" @@ -44,7 +45,13 @@ extern void common_hal_mcu_reset(void); extern const mp_obj_dict_t mcu_pin_globals; +#if CIRCUITPY_PROCESSOR_COUNT == 1 extern const mcu_processor_obj_t common_hal_mcu_processor_obj; +#elif CIRCUITPY_PROCESSOR_COUNT > 1 +extern const mp_rom_obj_tuple_t common_hal_mcu_processor_obj; +#else +#error "Invalid processor count" +#endif #if CIRCUITPY_INTERNAL_NVM_SIZE > 0 diff --git a/shared-bindings/rgbmatrix/RGBMatrix.c b/shared-bindings/rgbmatrix/RGBMatrix.c index 5f5ea4fae7..2a81bb53c2 100644 --- a/shared-bindings/rgbmatrix/RGBMatrix.c +++ b/shared-bindings/rgbmatrix/RGBMatrix.c @@ -132,11 +132,11 @@ STATIC void preflight_pins_or_throw(uint8_t clock_pin, uint8_t *rgb_pins, uint8_ } } -//| def __init__(self, *, width: int, bit_depth: int, rgb_pins: Sequence[digitalio.DigitalInOut], addr_pins: Sequence[digitalio.DigitalInOut], clock_pin: digitalio.DigitalInOut, latch_pin: digitalio.DigitalInOut, output_enable_pin: digitalio.DigitalInOut, doublebuffer: bool = True, framebuffer: Optional[WriteableBuffer] = None, height: int = 0) -> None: +//| def __init__(self, *, width: int, bit_depth: int, rgb_pins: Sequence[digitalio.DigitalInOut], addr_pins: Sequence[digitalio.DigitalInOut], clock_pin: digitalio.DigitalInOut, latch_pin: digitalio.DigitalInOut, output_enable_pin: digitalio.DigitalInOut, doublebuffer: bool = True, framebuffer: Optional[WriteableBuffer] = None, height: int = 0, tile: int = 1, serpentine: bool = False) -> None: //| """Create a RGBMatrix object with the given attributes. The height of -//| the display is determined by the number of rgb and address pins: -//| len(rgb_pins) // 3 * 2 ** len(address_pins). With 6 RGB pins and 4 -//| address lines, the display will be 32 pixels tall. If the optional height +//| the display is determined by the number of rgb and address pins and the number of tiles: +//| ``len(rgb_pins) // 3 * 2 ** len(address_pins) * abs(tile)``. With 6 RGB pins, 4 +//| address lines, and a single matrix, the display will be 32 pixels tall. If the optional height //| parameter is specified and is not 0, it is checked against the calculated //| height. //| @@ -172,7 +172,7 @@ STATIC void preflight_pins_or_throw(uint8_t clock_pin, uint8_t *rgb_pins, uint8_ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { enum { ARG_width, ARG_bit_depth, ARG_rgb_list, ARG_addr_list, - ARG_clock_pin, ARG_latch_pin, ARG_output_enable_pin, ARG_doublebuffer, ARG_framebuffer, ARG_height }; + ARG_clock_pin, ARG_latch_pin, ARG_output_enable_pin, ARG_doublebuffer, ARG_framebuffer, ARG_height, ARG_tile, ARG_serpentine }; static const mp_arg_t allowed_args[] = { { MP_QSTR_width, MP_ARG_INT | MP_ARG_REQUIRED | MP_ARG_KW_ONLY }, { MP_QSTR_bit_depth, MP_ARG_INT | MP_ARG_REQUIRED | MP_ARG_KW_ONLY }, @@ -184,6 +184,8 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n { MP_QSTR_doublebuffer, MP_ARG_BOOL | MP_ARG_KW_ONLY, { .u_bool = true } }, { MP_QSTR_framebuffer, MP_ARG_OBJ | MP_ARG_KW_ONLY, { .u_obj = mp_const_none } }, { MP_QSTR_height, MP_ARG_INT | MP_ARG_KW_ONLY, { .u_int = 0 } }, + { MP_QSTR_tile, MP_ARG_INT | MP_ARG_KW_ONLY, { .u_int = 1 } }, + { MP_QSTR_serpentine, MP_ARG_BOOL | MP_ARG_KW_ONLY, { .u_bool = false } }, }; mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); @@ -210,12 +212,18 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n mp_raise_ValueError_varg(translate("Must use a multiple of 6 rgb pins, not %d"), rgb_count); } - // TODO(@jepler) Use fewer than all rows of pixels if height < computed_height + int tile = args[ARG_tile].u_int; + + if (tile <= 0) { + mp_raise_ValueError_varg( + translate("tile must be greater than zero")); + } + + int computed_height = (rgb_count / 3) * (1 << (addr_count)) * tile; if (args[ARG_height].u_int != 0) { - int computed_height = (rgb_count / 3) << (addr_count); if (computed_height != args[ARG_height].u_int) { mp_raise_ValueError_varg( - translate("%d address pins and %d rgb pins indicate a height of %d, not %d"), addr_count, rgb_count, computed_height, args[ARG_height].u_int); + translate("%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"), addr_count, rgb_count, tile, computed_height, args[ARG_height].u_int); } } @@ -228,7 +236,7 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n mp_obj_t framebuffer = args[ARG_framebuffer].u_obj; if (framebuffer == mp_const_none) { int width = args[ARG_width].u_int; - int bufsize = 2 * width * rgb_count / 3 * (1 << addr_count); + int bufsize = 2 * width * computed_height; framebuffer = mp_obj_new_bytearray_of_zeros(bufsize); } @@ -239,7 +247,7 @@ STATIC mp_obj_t rgbmatrix_rgbmatrix_make_new(const mp_obj_type_t *type, size_t n addr_count, addr_pins, clock_pin, latch_pin, output_enable_pin, args[ARG_doublebuffer].u_bool, - framebuffer, NULL); + framebuffer, tile, args[ARG_serpentine].u_bool, NULL); claim_and_never_reset_pins(args[ARG_rgb_list].u_obj); claim_and_never_reset_pins(args[ARG_addr_list].u_obj); diff --git a/shared-bindings/rgbmatrix/RGBMatrix.h b/shared-bindings/rgbmatrix/RGBMatrix.h index bfe37c3404..4eb3c04b27 100644 --- a/shared-bindings/rgbmatrix/RGBMatrix.h +++ b/shared-bindings/rgbmatrix/RGBMatrix.h @@ -31,7 +31,7 @@ extern const mp_obj_type_t rgbmatrix_RGBMatrix_type; -void common_hal_rgbmatrix_rgbmatrix_construct(rgbmatrix_rgbmatrix_obj_t* self, int width, int bit_depth, uint8_t rgb_count, uint8_t* rgb_pins, uint8_t addr_count, uint8_t* addr_pins, uint8_t clock_pin, uint8_t latch_pin, uint8_t oe_pin, bool doublebuffer, mp_obj_t framebuffer, void* timer); +void common_hal_rgbmatrix_rgbmatrix_construct(rgbmatrix_rgbmatrix_obj_t* self, int width, int bit_depth, uint8_t rgb_count, uint8_t* rgb_pins, uint8_t addr_count, uint8_t* addr_pins, uint8_t clock_pin, uint8_t latch_pin, uint8_t oe_pin, bool doublebuffer, mp_obj_t framebuffer, int8_t tile, bool serpentine, void* timer); void common_hal_rgbmatrix_rgbmatrix_deinit(rgbmatrix_rgbmatrix_obj_t*); void rgbmatrix_rgbmatrix_collect_ptrs(rgbmatrix_rgbmatrix_obj_t*); void common_hal_rgbmatrix_rgbmatrix_reconstruct(rgbmatrix_rgbmatrix_obj_t* self, mp_obj_t framebuffer); diff --git a/shared-bindings/socketpool/Socket.c b/shared-bindings/socketpool/Socket.c index 0e6968d5f4..0074173405 100644 --- a/shared-bindings/socketpool/Socket.c +++ b/shared-bindings/socketpool/Socket.c @@ -64,94 +64,65 @@ STATIC mp_obj_t socketpool_socket___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket___exit___obj, 4, 4, socketpool_socket___exit__); -// //| def bind(self, address: tuple) -> None: -// //| """Bind a socket to an address -// //| -// //| :param ~tuple address: tuple of (remote_address, remote_port)""" -// //| ... -// //| +//| def bind(self, address: Tuple[str, int]) -> None: +//| """Bind a socket to an address +//| +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... +//| +STATIC mp_obj_t socketpool_socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); -// STATIC mp_obj_t socketpool_socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { -// // mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + mp_obj_t *addr_items; + mp_obj_get_array_fixed_n(addr_in, 2, &addr_items); -// // // get address -// // uint8_t ip[MOD_NETWORK_IPADDR_BUF_SIZE]; -// // mp_uint_t port = netutils_parse_inet_addr(addr_in, ip, NETUTILS_BIG); + size_t hostlen; + const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); + mp_int_t port = mp_obj_get_int(addr_items[1]); -// // // check if we need to select a NIC -// // socket_select_nic(self, ip); + bool ok = common_hal_socketpool_socket_bind(self, host, hostlen, port); + if (!ok) { + mp_raise_ValueError(translate("Error: Failure to bind")); + } -// // // call the NIC to bind the socket -// // int _errno; -// // if (self->nic_type->bind(self, ip, port, &_errno) != 0) { -// // mp_raise_OSError(_errno); -// // } + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_bind_obj, socketpool_socket_bind); -// return mp_const_none; -// } -// STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_bind_obj, socketpool_socket_bind); +//| def listen(self, backlog: int) -> None: +//| """Set socket to listen for incoming connections +//| +//| :param ~int backlog: length of backlog queue for waiting connetions""" +//| ... +//| +STATIC mp_obj_t socketpool_socket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); -// //| def listen(self, backlog: int) -> None: -// //| """Set socket to listen for incoming connections -// //| -// //| :param ~int backlog: length of backlog queue for waiting connetions""" -// //| ... -// //| + int backlog = mp_obj_get_int(backlog_in); -// STATIC mp_obj_t socketpool_socket_listen(mp_obj_t self_in, mp_obj_t backlog) { -// // mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + common_hal_socketpool_socket_listen(self, backlog); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_listen_obj, socketpool_socket_listen); -// // if (self->nic == MP_OBJ_NULL) { -// // // not connected -// // // TODO I think we can listen even if not bound... -// // mp_raise_OSError(MP_ENOTCONN); -// // } +//| def accept(self) -> Tuple[Socket, Tuple[str, int]]: +//| """Accept a connection on a listening socket of type SOCK_STREAM, +//| creating a new socket of type SOCK_STREAM. +//| Returns a tuple of (new_socket, remote_address)""" +//| +STATIC mp_obj_t socketpool_socket_accept(mp_obj_t self_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + uint8_t ip[4]; + uint port; -// // int _errno; -// // if (self->nic_type->listen(self, mp_obj_get_int(backlog), &_errno) != 0) { -// // mp_raise_OSError(_errno); -// // } + socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self, ip, &port); -// return mp_const_none; -// } -// STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_listen_obj, socketpool_socket_listen); - -// //| def accept(self) -> tuple: -// //| """Accept a connection on a listening socket of type SOCK_STREAM, -// //| creating a new socket of type SOCK_STREAM. -// //| Returns a tuple of (new_socket, remote_address)""" -// //| - -// STATIC mp_obj_t socketpool_socket_accept(mp_obj_t self_in) { -// // mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - -// // // create new socket object -// // // starts with empty NIC so that finaliser doesn't run close() method if accept() fails -// // mod_network_socket_obj_t *socket2 = m_new_obj_with_finaliser(mod_network_socket_obj_t); -// // socket2->base.type = &socket_type; -// // socket2->nic = MP_OBJ_NULL; -// // socket2->nic_type = NULL; - -// // // accept incoming connection -// // uint8_t ip[MOD_NETWORK_IPADDR_BUF_SIZE]; -// // mp_uint_t port; -// // int _errno; -// // if (self->nic_type->accept(self, socket2, ip, &port, &_errno) != 0) { -// // mp_raise_OSError(_errno); -// // } - -// // // new socket has valid state, so set the NIC to the same as parent -// // socket2->nic = self->nic; -// // socket2->nic_type = self->nic_type; - -// // // make the return value -// // mp_obj_tuple_t *client = MP_OBJ_TO_PTR(mp_obj_new_tuple(2, NULL)); -// // client->items[0] = MP_OBJ_FROM_PTR(socket2); -// // client->items[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); - -// return mp_const_none; -// } -// STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_accept_obj, socketpool_socket_accept); + mp_obj_t tuple_contents[2]; + tuple_contents[0] = MP_OBJ_FROM_PTR(sock); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_accept_obj, socketpool_socket_accept); //| def close(self) -> None: //| """Closes this Socket and makes its resources available to its SocketPool.""" @@ -169,7 +140,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_close_obj, socketpool_socket_ //| :param ~tuple address: tuple of (remote_address, remote_port)""" //| ... //| - STATIC mp_obj_t socketpool_socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -196,7 +166,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_connect_obj, socketpool_socke //| :param ~bytes bytes: some bytes to send""" //| ... //| - STATIC mp_obj_t socketpool_socket_send(mp_obj_t self_in, mp_obj_t buf_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); if (common_hal_socketpool_socket_get_closed(self)) { @@ -216,19 +185,6 @@ STATIC mp_obj_t socketpool_socket_send(mp_obj_t self_in, mp_obj_t buf_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_send); - -// helper function for socket_recv and socket_recv_into to handle common operations of both -// STATIC mp_int_t _socket_recv_into(mod_network_socket_obj_t *sock, byte *buf, mp_int_t len) { -// mp_int_t ret = 0; -// // int _errno; -// // mp_int_t ret = sock->nic_type->recv(sock, buf, len, &_errno); -// // if (ret == -1) { -// // mp_raise_OSError(_errno); -// // } -// return ret; -// } - - //| def recv_into(self, buffer: WriteableBuffer, bufsize: int) -> int: //| """Reads some bytes from the connected remote address, writing //| into the provided buffer. If bufsize <= len(buffer) is given, @@ -250,10 +206,10 @@ STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) // Bad file number. mp_raise_OSError(MP_EBADF); } - if (!common_hal_socketpool_socket_get_connected(self)) { - // not connected - mp_raise_OSError(MP_ENOTCONN); - } + // if (!common_hal_socketpool_socket_get_connected(self)) { + // // not connected + // mp_raise_OSError(MP_ENOTCONN); + // } mp_buffer_info_t bufinfo; mp_get_buffer_raise(args[1], &bufinfo, MP_BUFFER_WRITE); mp_int_t len = bufinfo.len; @@ -430,9 +386,9 @@ STATIC const mp_rom_map_elem_t socketpool_socket_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&socketpool_socket_close_obj) }, { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&socketpool_socket_close_obj) }, - // { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&socketpool_socket_bind_obj) }, - // { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&socketpool_socket_listen_obj) }, - // { MP_ROM_QSTR(MP_QSTR_accept), MP_ROM_PTR(&socketpool_socket_accept_obj) }, + { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&socketpool_socket_bind_obj) }, + { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&socketpool_socket_listen_obj) }, + { MP_ROM_QSTR(MP_QSTR_accept), MP_ROM_PTR(&socketpool_socket_accept_obj) }, { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&socketpool_socket_connect_obj) }, { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&socketpool_socket_send_obj) }, { MP_ROM_QSTR(MP_QSTR_sendto), MP_ROM_PTR(&socketpool_socket_sendto_obj) }, diff --git a/shared-bindings/socketpool/Socket.h b/shared-bindings/socketpool/Socket.h index 54fbe59b28..b5dceb50f4 100644 --- a/shared-bindings/socketpool/Socket.h +++ b/shared-bindings/socketpool/Socket.h @@ -32,6 +32,11 @@ extern const mp_obj_type_t socketpool_socket_type; void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, mp_uint_t timeout_ms); + +bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint8_t port); +bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog); +socketpool_socket_obj_t * common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, uint8_t* ip, uint *port); + bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const char* host, size_t hostlen, mp_int_t port); mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len); mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len); diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index 73eeed2652..8f4069faad 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -62,14 +62,12 @@ STATIC mp_obj_t socketpool_socketpool_make_new(const mp_obj_type_t *type, size_t //| SOCK_STREAM: int //| SOCK_DGRAM: int //| SOCK_RAW: int -//| IPPROTO_TCP: int //| -//| def socket(self, family: int = AF_INET, type: int = SOCK_STREAM, proto: int = IPPROTO_TCP) -> socketpool.Socket: +//| def socket(self, family: int = AF_INET, type: int = SOCK_STREAM) -> socketpool.Socket: //| """Create a new socket //| //| :param ~int family: AF_INET or AF_INET6 -//| :param ~int type: SOCK_STREAM, SOCK_DGRAM or SOCK_RAW -//| :param ~int proto: IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW (ignored)""" +//| :param ~int type: SOCK_STREAM, SOCK_DGRAM or SOCK_RAW""" //| ... //| diff --git a/shared-bindings/support_matrix.rst b/shared-bindings/support_matrix.rst index 1b75e02567..a2fb7987d2 100644 --- a/shared-bindings/support_matrix.rst +++ b/shared-bindings/support_matrix.rst @@ -1,7 +1,7 @@ .. _module-support-matrix: -Support Matrix -=============== +Module Support Matrix - Which Modules Are Available on Which Boards +=================================================================== The following table lists the available built-in modules for each CircuitPython capable board. diff --git a/shared-module/_eve/__init__.c b/shared-module/_eve/__init__.c index d95c777dc4..579729d42c 100644 --- a/shared-module/_eve/__init__.c +++ b/shared-module/_eve/__init__.c @@ -226,8 +226,9 @@ void common_hal__eve_Jump(common_hal__eve_t *eve, uint32_t dest) { } -void common_hal__eve_LineWidth(common_hal__eve_t *eve, uint32_t width) { - C4(eve, ((14 << 24) | ((width & 4095)))); +void common_hal__eve_LineWidth(common_hal__eve_t *eve, mp_float_t width) { + int16_t iw = (int)(8 * width); + C4(eve, ((14 << 24) | ((iw & 4095)))); } @@ -246,8 +247,9 @@ void common_hal__eve_PaletteSource(common_hal__eve_t *eve, uint32_t addr) { } -void common_hal__eve_PointSize(common_hal__eve_t *eve, uint32_t size) { - C4(eve, ((13 << 24) | ((size & 8191)))); +void common_hal__eve_PointSize(common_hal__eve_t *eve, mp_float_t size) { + int16_t is = (int)(8 * size); + C4(eve, ((13 << 24) | ((is & 8191)))); } @@ -301,13 +303,15 @@ void common_hal__eve_Tag(common_hal__eve_t *eve, uint32_t s) { } -void common_hal__eve_VertexTranslateX(common_hal__eve_t *eve, uint32_t x) { - C4(eve, ((43 << 24) | (((x) & 131071)))); +void common_hal__eve_VertexTranslateX(common_hal__eve_t *eve, mp_float_t x) { + int16_t ix = (int)(16 * x); + C4(eve, ((43 << 24) | (ix & 131071))); } -void common_hal__eve_VertexTranslateY(common_hal__eve_t *eve, uint32_t y) { - C4(eve, ((44 << 24) | (((y) & 131071)))); +void common_hal__eve_VertexTranslateY(common_hal__eve_t *eve, mp_float_t y) { + int16_t iy = (int)(16 * y); + C4(eve, ((44 << 24) | (iy & 131071))); } diff --git a/shared-module/adafruit_bus_device/I2CDevice.c b/shared-module/adafruit_bus_device/I2CDevice.c index 83abe80d64..792ab7183c 100644 --- a/shared-module/adafruit_bus_device/I2CDevice.c +++ b/shared-module/adafruit_bus_device/I2CDevice.c @@ -31,48 +31,60 @@ #include "py/runtime.h" #include "lib/utils/interrupt_char.h" -void common_hal_adafruit_bus_device_i2cdevice_construct(adafruit_bus_device_i2cdevice_obj_t *self, busio_i2c_obj_t *i2c, uint8_t device_address) { +void common_hal_adafruit_bus_device_i2cdevice_construct(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t *i2c, uint8_t device_address) { self->i2c = i2c; self->device_address = device_address; } void common_hal_adafruit_bus_device_i2cdevice_lock(adafruit_bus_device_i2cdevice_obj_t *self) { - bool success = common_hal_busio_i2c_try_lock(self->i2c); + mp_obj_t dest[2]; + mp_load_method(self->i2c, MP_QSTR_try_lock, dest); - while (!success) { + mp_obj_t success = mp_call_method_n_kw(0, 0, dest); + + while (!mp_obj_is_true(success)) { RUN_BACKGROUND_TASKS; if (mp_hal_is_interrupted()) { break; } - success = common_hal_busio_i2c_try_lock(self->i2c); + success = mp_call_method_n_kw(0, 0, dest); } } void common_hal_adafruit_bus_device_i2cdevice_unlock(adafruit_bus_device_i2cdevice_obj_t *self) { - common_hal_busio_i2c_unlock(self->i2c); -} - -uint8_t common_hal_adafruit_bus_device_i2cdevice_readinto(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t buffer, size_t length) { - return common_hal_busio_i2c_read(self->i2c, self->device_address, buffer, length); -} - -uint8_t common_hal_adafruit_bus_device_i2cdevice_write(adafruit_bus_device_i2cdevice_obj_t *self, mp_obj_t buffer, size_t length, bool transmit_stop_bit) { - return common_hal_busio_i2c_write(self->i2c, self->device_address, buffer, length, transmit_stop_bit); + mp_obj_t dest[2]; + mp_load_method(self->i2c, MP_QSTR_unlock, dest); + mp_call_method_n_kw(0, 0, dest); } void common_hal_adafruit_bus_device_i2cdevice_probe_for_device(adafruit_bus_device_i2cdevice_obj_t *self) { common_hal_adafruit_bus_device_i2cdevice_lock(self); - mp_buffer_info_t bufinfo; - mp_obj_t buffer = mp_obj_new_bytearray_of_zeros(1); + mp_buffer_info_t write_bufinfo; + mp_obj_t write_buffer = mp_obj_new_bytearray_of_zeros(0); + mp_get_buffer_raise(write_buffer, &write_bufinfo, MP_BUFFER_READ); - mp_get_buffer_raise(buffer, &bufinfo, MP_BUFFER_WRITE); + mp_obj_t dest[4]; - uint8_t status = common_hal_adafruit_bus_device_i2cdevice_readinto(self, (uint8_t*)bufinfo.buf, 1); - if (status != 0) { + /* catch exceptions that may be thrown while probing for the device */ + nlr_buf_t nlr; + if (nlr_push(&nlr) == 0) { + mp_load_method(self->i2c, MP_QSTR_writeto, dest); + dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[3] = write_buffer; + mp_call_method_n_kw(2, 0, dest); + nlr_pop(); + } else { common_hal_adafruit_bus_device_i2cdevice_unlock(self); - mp_raise_ValueError_varg(translate("No I2C device at address: %x"), self->device_address); + + if (mp_obj_is_subclass_fast(MP_OBJ_FROM_PTR(((mp_obj_base_t*)nlr.ret_val)->type), MP_OBJ_FROM_PTR(&mp_type_OSError))) { + mp_raise_ValueError_varg(translate("No I2C device at address: %x"), self->device_address); + } + else { + /* In case we receive an unrelated exception pass it up */ + nlr_raise(MP_OBJ_FROM_PTR(nlr.ret_val)); + } } common_hal_adafruit_bus_device_i2cdevice_unlock(self); diff --git a/shared-module/adafruit_bus_device/I2CDevice.h b/shared-module/adafruit_bus_device/I2CDevice.h index d06adb9f50..b76bafb2c1 100644 --- a/shared-module/adafruit_bus_device/I2CDevice.h +++ b/shared-module/adafruit_bus_device/I2CDevice.h @@ -32,7 +32,7 @@ typedef struct { mp_obj_base_t base; - busio_i2c_obj_t *i2c; + mp_obj_t *i2c; uint8_t device_address; } adafruit_bus_device_i2cdevice_obj_t; diff --git a/shared-module/msgpack/__init__.c b/shared-module/msgpack/__init__.c index 39178d46e1..1030031749 100644 --- a/shared-module/msgpack/__init__.c +++ b/shared-module/msgpack/__init__.c @@ -255,11 +255,6 @@ STATIC void pack(mp_obj_t obj, msgpack_stream_t *s, mp_obj_t default_handler) { mp_buffer_info_t bufinfo; mp_get_buffer_raise(ext->data, &bufinfo, MP_BUFFER_READ); pack_ext(s, ext->code, bufinfo.buf, bufinfo.len); - } else if (MP_OBJ_IS_TYPE(obj, &mp_type_bytes)) { - // bytes - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(obj, &bufinfo, MP_BUFFER_READ); - pack_bin(s, bufinfo.buf, bufinfo.len); } else if (MP_OBJ_IS_TYPE(obj, &mp_type_tuple)) { // tuple mp_obj_tuple_t *self = MP_OBJ_TO_PTR(obj); @@ -297,7 +292,11 @@ STATIC void pack(mp_obj_t obj, msgpack_stream_t *s, mp_obj_t default_handler) { } else if (obj == mp_const_true) { write1(s, 0xc3); } else { - if (default_handler != mp_const_none) { + mp_buffer_info_t bufinfo; + if (mp_get_buffer(obj, &bufinfo, MP_BUFFER_READ)) { + // bytes (bin type) + pack_bin(s, bufinfo.buf, bufinfo.len); + } else if (default_handler != mp_const_none) { // set default_handler to mp_const_none to avoid infinite recursion // this also precludes some valid outputs pack(mp_call_function_1(default_handler, obj), s, mp_const_none); @@ -332,7 +331,15 @@ STATIC mp_obj_t unpack_bytes(msgpack_stream_t *s, size_t size) { vstr_t vstr; vstr_init_len(&vstr, size); byte *p = (byte*)vstr.buf; - read(s, p, size); + // read in chunks: (some drivers - e.g. UART) limit the + // maximum number of bytes that can be read at once + // read(s, p, size); + while (size > 0) { + int n = size > 256 ? 256 : size; + read(s, p, n); + size -= n; + p += n; + } return mp_obj_new_str_from_vstr(&mp_type_bytes, &vstr); } diff --git a/shared-module/os/__init__.c b/shared-module/os/__init__.c index 39cf40fda3..159b54e315 100644 --- a/shared-module/os/__init__.c +++ b/shared-module/os/__init__.c @@ -42,6 +42,7 @@ // Version of mp_vfs_lookup_path that takes and returns uPy string objects. STATIC mp_vfs_mount_t *lookup_path(const char* path, mp_obj_t *path_out) { const char *p_out; + *path_out = mp_const_none; mp_vfs_mount_t *vfs = mp_vfs_lookup_path(path, &p_out); if (vfs != MP_VFS_NONE && vfs != MP_VFS_ROOT) { *path_out = mp_obj_new_str_of_type(&mp_type_str, @@ -53,6 +54,7 @@ STATIC mp_vfs_mount_t *lookup_path(const char* path, mp_obj_t *path_out) { // Strip off trailing slashes to please underlying libraries STATIC mp_vfs_mount_t *lookup_dir_path(const char* path, mp_obj_t *path_out) { const char *p_out; + *path_out = mp_const_none; mp_vfs_mount_t *vfs = mp_vfs_lookup_path(path, &p_out); if (vfs != MP_VFS_NONE && vfs != MP_VFS_ROOT) { size_t len = strlen(p_out); diff --git a/shared-module/rgbmatrix/RGBMatrix.c b/shared-module/rgbmatrix/RGBMatrix.c index a09767b622..b8db0d8939 100644 --- a/shared-module/rgbmatrix/RGBMatrix.c +++ b/shared-module/rgbmatrix/RGBMatrix.c @@ -42,7 +42,7 @@ extern Protomatter_core *_PM_protoPtr; -void common_hal_rgbmatrix_rgbmatrix_construct(rgbmatrix_rgbmatrix_obj_t *self, int width, int bit_depth, uint8_t rgb_count, uint8_t *rgb_pins, uint8_t addr_count, uint8_t *addr_pins, uint8_t clock_pin, uint8_t latch_pin, uint8_t oe_pin, bool doublebuffer, mp_obj_t framebuffer, void *timer) { +void common_hal_rgbmatrix_rgbmatrix_construct(rgbmatrix_rgbmatrix_obj_t *self, int width, int bit_depth, uint8_t rgb_count, uint8_t *rgb_pins, uint8_t addr_count, uint8_t *addr_pins, uint8_t clock_pin, uint8_t latch_pin, uint8_t oe_pin, bool doublebuffer, mp_obj_t framebuffer, int8_t tile, bool serpentine, void *timer) { self->width = width; self->bit_depth = bit_depth; self->rgb_count = rgb_count; @@ -53,6 +53,8 @@ void common_hal_rgbmatrix_rgbmatrix_construct(rgbmatrix_rgbmatrix_obj_t *self, i self->oe_pin = oe_pin; self->latch_pin = latch_pin; self->doublebuffer = doublebuffer; + self->tile = tile; + self->serpentine = serpentine; self->timer = timer ? timer : common_hal_rgbmatrix_timer_allocate(); if (self->timer == NULL) { @@ -60,7 +62,7 @@ void common_hal_rgbmatrix_rgbmatrix_construct(rgbmatrix_rgbmatrix_obj_t *self, i } self->width = width; - self->bufsize = 2 * width * rgb_count / 3 * (1 << addr_count); + self->bufsize = 2 * width * common_hal_rgbmatrix_rgbmatrix_get_height(self); common_hal_rgbmatrix_rgbmatrix_reconstruct(self, framebuffer); } @@ -95,7 +97,8 @@ void common_hal_rgbmatrix_rgbmatrix_reconstruct(rgbmatrix_rgbmatrix_obj_t* self, self->rgb_count/6, self->rgb_pins, self->addr_count, self->addr_pins, self->clock_pin, self->latch_pin, self->oe_pin, - self->doublebuffer, self->timer); + self->doublebuffer, self->serpentine ? -self->tile : self->tile, + self->timer); if (stat == PROTOMATTER_OK) { _PM_protoPtr = &self->protomatter; @@ -209,7 +212,7 @@ int common_hal_rgbmatrix_rgbmatrix_get_width(rgbmatrix_rgbmatrix_obj_t* self) { } int common_hal_rgbmatrix_rgbmatrix_get_height(rgbmatrix_rgbmatrix_obj_t* self) { - int computed_height = (self->rgb_count / 3) << (self->addr_count); + int computed_height = (self->rgb_count / 3) * (1 << (self->addr_count)) * self->tile; return computed_height; } diff --git a/shared-module/rgbmatrix/RGBMatrix.h b/shared-module/rgbmatrix/RGBMatrix.h index 6dbc6fd41e..4a0e9235e7 100644 --- a/shared-module/rgbmatrix/RGBMatrix.h +++ b/shared-module/rgbmatrix/RGBMatrix.h @@ -44,4 +44,6 @@ typedef struct { bool core_is_initialized; bool paused; bool doublebuffer; + bool serpentine; + int8_t tile; } rgbmatrix_rgbmatrix_obj_t; diff --git a/shared-module/sdcardio/SDCard.c b/shared-module/sdcardio/SDCard.c index 9e861279d3..1712f58ee4 100644 --- a/shared-module/sdcardio/SDCard.c +++ b/shared-module/sdcardio/SDCard.c @@ -375,7 +375,7 @@ int common_hal_sdcardio_sdcard_readblocks(sdcardio_sdcard_obj_t *self, uint32_t return r; } -int _write(sdcardio_sdcard_obj_t *self, uint8_t token, void *buf, size_t size) { +STATIC int _write(sdcardio_sdcard_obj_t *self, uint8_t token, void *buf, size_t size) { wait_for_ready(self); uint8_t cmd[2]; @@ -420,7 +420,7 @@ int _write(sdcardio_sdcard_obj_t *self, uint8_t token, void *buf, size_t size) { return 0; } -int writeblocks(sdcardio_sdcard_obj_t *self, uint32_t start_block, mp_buffer_info_t *buf) { +STATIC int writeblocks(sdcardio_sdcard_obj_t *self, uint32_t start_block, mp_buffer_info_t *buf) { common_hal_sdcardio_check_for_deinit(self); uint32_t nblocks = buf->len / 512; if (nblocks == 1) { diff --git a/supervisor/shared/filesystem.c b/supervisor/shared/filesystem.c index 618dc796b8..09b30b6bad 100644 --- a/supervisor/shared/filesystem.c +++ b/supervisor/shared/filesystem.c @@ -79,6 +79,8 @@ static void make_sample_code_file(FATFS *fatfs) { f_open(fatfs, &fs, "/code.py", FA_WRITE | FA_CREATE_ALWAYS); f_write(&fs, buffer, sizeof(buffer) - 1, &char_written); f_close(&fs); + #else + make_empty_file(fatfs, "/code.py"); #endif } diff --git a/supervisor/shared/safe_mode.c b/supervisor/shared/safe_mode.c index 9032e40451..b37b38e088 100644 --- a/supervisor/shared/safe_mode.c +++ b/supervisor/shared/safe_mode.c @@ -28,7 +28,9 @@ #include "mphalport.h" +#if defined(MICROPY_HW_LED_STATUS) || defined(CIRCUITPY_BOOT_BUTTON) #include "shared-bindings/digitalio/DigitalInOut.h" +#endif #include "shared-bindings/microcontroller/Processor.h" #include "shared-bindings/microcontroller/ResetReason.h" diff --git a/supervisor/shared/usb/usb.c b/supervisor/shared/usb/usb.c index ff08ade18a..07c6aee6c1 100644 --- a/supervisor/shared/usb/usb.c +++ b/supervisor/shared/usb/usb.c @@ -59,12 +59,16 @@ bool usb_enabled(void) { return tusb_inited(); } +MP_WEAK void post_usb_init(void) {} + void usb_init(void) { init_usb_hardware(); load_serial_number(); tusb_init(); + post_usb_init(); + #if MICROPY_KBD_EXCEPTION // Set Ctrl+C as wanted char, tud_cdc_rx_wanted_cb() usb_callback will be invoked when Ctrl+C is received // This usb_callback always got invoked regardless of mp_interrupt_char value since we only set it once here diff --git a/supervisor/usb.h b/supervisor/usb.h index 0dead3e265..ccb35470cd 100644 --- a/supervisor/usb.h +++ b/supervisor/usb.h @@ -42,6 +42,9 @@ void usb_irq_handler(void); // TinyUSB. void init_usb_hardware(void); +// Temporary hook for code after init. Only used for RP2040. +void post_usb_init(void); + // Shared implementation. bool usb_enabled(void); void usb_init(void); diff --git a/tools/build_board_info.py b/tools/build_board_info.py index ce9d45fe2f..7b556ee5d2 100644 --- a/tools/build_board_info.py +++ b/tools/build_board_info.py @@ -26,6 +26,7 @@ SUPPORTED_PORTS = [ "litex", "mimxrt10xx", "nrf", + "raspberrypi", "stm", ] @@ -47,6 +48,7 @@ extension_by_port = { "mimxrt10xx": HEX_UF2, "litex": DFU, "esp32s2": BIN_UF2, + "raspberrypi": UF2, } # Per board overrides diff --git a/tools/build_memory_info.py b/tools/build_memory_info.py index 26697b9740..89aedf0f40 100644 --- a/tools/build_memory_info.py +++ b/tools/build_memory_info.py @@ -9,10 +9,10 @@ import re import sys # Handle size constants with K or M suffixes (allowed in .ld but not in Python). -K_PATTERN = re.compile(r'([0-9]+)K') +K_PATTERN = re.compile(r'([0-9]+)[kK]') K_REPLACE = r'(\1*1024)' -M_PATTERN = re.compile(r'([0-9]+)M') +M_PATTERN = re.compile(r'([0-9]+)[mM]') M_REPLACE = r'(\1*1024*1024)' print()