djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

esp32/README: Update based on new IDF v4 cmake build process.

Browse Source 
Signed-off-by: Damien George <damien@micropython.org>
This commit is contained in:
Damien George 2021-02-14 17:51:31 +11:00
parent aa3d6b6aa5
commit e017f276f7
1 changed files with 77 additions and 170 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

247
ports/esp32/README.md
View File

@ -1,13 +1,13 @@
MicroPython port to the ESP32
=============================
This is an experimental port of MicroPython to the Espressif ESP32
microcontroller. It uses the ESP-IDF framework and MicroPython runs as
This is a port of MicroPython to the Espressif ESP32 series of
microcontrollers. It uses the ESP-IDF framework and MicroPython runs as
a task under FreeRTOS.
Supported features include:
- REPL (Python prompt) over UART0.
- 16k stack for the MicroPython task and 96k Python heap.
- 16k stack for the MicroPython task and approximately 100k Python heap.
- Many of MicroPython's features are enabled: unicode, arbitrary-precision
integers, single-precision floats, complex numbers, frozen bytecode, as
well as many of the internal modules.
@ -15,16 +15,24 @@ Supported features include:
- The machine module with GPIO, UART, SPI, software I2C, ADC, DAC, PWM,
TouchPad, WDT and Timer.
- The network module with WLAN (WiFi) support.
- Bluetooth low-energy (BLE) support via the bluetooth module.
Development of this ESP32 port was sponsored in part by Microbric Pty Ltd.
Initial development of this ESP32 port was sponsored in part by Microbric Pty Ltd.
Setting up the toolchain and ESP-IDF
------------------------------------
Setting up ESP-IDF and the build environment
--------------------------------------------
There are two main components that are needed to build the firmware:
- the Xtensa cross-compiler that targets the CPU in the ESP32 (this is
different to the compiler used by the ESP8266)
- the Espressif IDF (IoT development framework, aka SDK)
MicroPython on ESP32 requires the Espressif IDF version 4 (IoT development
framework, aka SDK). The ESP-IDF includes the libraries and RTOS needed to
manage the ESP32 microcontroller, as well as a way to manage the required
build environment and toolchains needed to build the firmware.
The ESP-IDF changes quickly and MicroPython only supports certain versions.
Currently MicroPython supports v4.0.2, although other IDF v4 versions may also
work.
To install the ESP-IDF the full instructions can be found at the
[Espressif Getting Started guide](https://docs.espressif.com/projects/esp-idf/en/v4.0.2/get-started/index.html#installation-step-by-step).
If you are on a Windows machine then the [Windows Subsystem for
Linux](https://msdn.microsoft.com/en-au/commandline/wsl/install_guide) is the
@ -32,164 +40,31 @@ most efficient way to install the ESP32 toolchain and build the project. If
you use WSL then follow the Linux instructions rather than the Windows
instructions.
The ESP-IDF changes quickly and MicroPython only supports certain versions.
The git hash of these versions (one for 3.x, one for 4.x) can be found by
running `make` without a configured `ESPIDF`. Then you can fetch the
required IDF using the following command:
The Espressif instructions will guide you through using the `install.sh`
(or `install.bat`) script to download the toolchain and set up your environment.
The steps to take are summarised below.
To check out a copy of the IDF use git clone:
```bash
$ cd ports/esp32
$ make ESPIDF= # This will print the supported hashes, copy the one you want.
$ export ESPIDF=$HOME/src/github.com/espressif/esp-idf # Or any path you like.
$ mkdir -p $ESPIDF
$ cd $ESPIDF
$ git clone https://github.com/espressif/esp-idf.git $ESPIDF
$ git checkout <Current supported ESP-IDF commit hash>
$ git submodule update --init --recursive
$ git clone -b v4.0.2 --recursive https://github.com/espressif/esp-idf.git
```
Note: The ESP IDF v4.x support is currently experimental. It does not
currently support PPP or wired Ethernet.
(You don't need a full recursive clone; see the `ci_esp32_setup` function in
`tools/ci.sh` in this repository for more detailed set-up commands.)
Python dependencies
===================
You will also need other dependencies from the IDF, see
`$ESPIDF/requirements.txt`, but at a minimum you need `pyserial>=3.0` and
`pyparsing>=2.0.3,<2.4.0`.
You can use Python 2 or Python 3. If you need to override the system default
add (for example) `PYTHON=python3` to any of the `make` commands below.
It is recommended to use a Python virtual environment. Even if your system
package manager already provides these libraries, the IDF v4.x is currently
incompatible with pyparsing 2.4 and higher.
For example, to set up a Python virtual environment from scratch:
After you've cloned and checked out the IDF to the correct version, run the
`install.sh` script:
```bash
$ cd ports/esp32
$ python3 -m venv build-venv
$ source build-venv/bin/activate
$ pip install --upgrade pip
$ pip install -r path/to/esp-idf/requirements.txt
```
To re-enter this virtual environment in future sessions, you only need to
source the `activate` script, i.e.:
```bash
$ cd ports/esp32
$ source build-venv/bin/activate
```
Then, to install the toolchain (which includes the GCC compiler, linker, binutils,
etc), there are two options:
1. Using the IDF scripts to install the toolchain (IDF 4.x only)
================================================================
Follow the steps at the [Espressif Getting Started guide](https://docs.espressif.com/projects/esp-idf/en/v4.0/get-started/index.html#step-3-set-up-the-tools).
This will guide you through using the `install.sh` (or `install.bat`) script
to download the toolchain and add it to your `PATH`. The steps are summarised
below:
After you've cloned and checked out the IDF to the correct version (see
above), run the `install.sh` script:
```bash
$ cd $ESPIDF
$ ./install.sh # (or install.bat on Windows)
```
Then in the `ports/esp32` directory, source the `export.sh` script to set the
`PATH`.
```bash
$ cd micropython/ports/esp32
$ source $ESPIDF/export.sh # (or path\to\esp-idf\export.bat on Windows)
$ # Run make etc, see below.
$ cd esp-idf
$ ./install.sh # (or install.bat on Windows)
$ source export.sh # (or export.bat on Windows)
```
The `install.sh` step only needs to be done once. You will need to source
`export.sh` for every new session.
Note: If you get an error about `--no-site-packages`, then modify
`$ESPIDF/tools/idf_tools.py` and make the same change as [this
commit](https://github.com/espressif/esp-idf/commit/7a18f02acd7005f7c56e62175a8d1968a1a9019d).
2. or, Downloading pre-built toolchain manually (IDF 3.x and 4.x)
=============================================================
Note: while this works with 4.x, if you're using the 4.x IDF, it's much
simpler to use the guide above, which will also get a more recent version of
the toolchain.
You can follow the 3.x guide at:
* [Linux installation](https://docs.espressif.com/projects/esp-idf/en/v3.3.2/get-started/linux-setup.html)
* [MacOS installation](https://docs.espressif.com/projects/esp-idf/en/v3.3.2/get-started/macos-setup.html)
* [Windows installation](https://docs.espressif.com/projects/esp-idf/en/v3.3.2/get-started/windows-setup.html)
You will need to update your `PATH` environment variable to include the ESP32
toolchain. For example, you can issue the following commands on (at least)
Linux:
$ export PATH=$PATH:$HOME/esp/crosstool-NG/builds/xtensa-esp32-elf/bin
You can put this command in your `.profile` or `.bash_login`, or do it manually.
Configuring the MicroPython build
---------------------------------
You then need to set the `ESPIDF` environment/makefile variable to point to
the root of the ESP-IDF repository. The recommended way to do this is to have
a custom `makefile` in `ports/esp32` which sets any additional variables, then
includes the main `Makefile`. Note that GNU Make will preferentially run
`GNUmakefile`, then `makefile`, then `Makefile`, which is what allows this to
work. On case-insensitive filesystems, you'll need to use `GNUmakefile` rather
than `makefile`.
Create a new file in the esp32 directory called `makefile` (or `GNUmakefile`)
and add the following lines to that file:
```
ESPIDF ?= <path to root of esp-idf repository>
BOARD ?= GENERIC
#PORT ?= /dev/ttyUSB0
#FLASH_MODE ?= qio
#FLASH_SIZE ?= 4MB
#CROSS_COMPILE ?= xtensa-esp32-elf-
include Makefile
```
Be sure to enter the correct path to your local copy of the IDF repository
(and use `$(HOME)`, not tilde (`~`), to reference your home directory).
If the Xtensa cross-compiler is not in your path you can use the
`CROSS_COMPILE` variable to set its location. Other options of interest are
`PORT` for the serial port of your ESP32 module, and `FLASH_MODE` (which may
need to be `dio` for some modules) and `FLASH_SIZE`. See the Makefile for
further information.
The default ESP IDF configuration settings are provided by the `GENERIC`
board definition in the directory `boards/GENERIC`. For a custom configuration
you can define your own board directory.
Any of these variables can also be set on the make command line, e.g. to set
the `BOARD` variable, use:
```bash
$ make BOARD=TINYPICO
```
Note the use of `?=` in the `makefile` which allows them to be overridden on
the command line. There is also a `GENERIC_SPIRAM` board for for ESP32
modules that have external SPIRAM, but prefer to use a specific board target
(or define your own as necessary).
Building the firmware
---------------------
@ -198,8 +73,7 @@ built-in scripts to bytecode. This can be done by (from the root of
this repository):
```bash
$ cd mpy-cross
$ make mpy-cross
$ make -C mpy-cross
```
Then to build MicroPython for the ESP32 run:
@ -210,16 +84,14 @@ $ make submodules
$ make
```
This will produce binary firmware images in the `build/` subdirectory
(three of them: bootloader.bin, partitions.bin and application.bin).
This will produce a combined `firmware.bin` image in the `build-GENERIC/`
subdirectory (this firmware image is made up of: bootloader.bin, partitions.bin
and micropython.bin).
To flash the firmware you must have your ESP32 module in the bootloader
mode and connected to a serial port on your PC. Refer to the documentation
for your particular ESP32 module for how to do this. The serial port and
flash settings are set in the `Makefile`, and can be overridden in your
local `makefile`; see above for more details.
You will also need to have user permissions to access the /dev/ttyUSB0 device.
for your particular ESP32 module for how to do this.
You will also need to have user permissions to access the `/dev/ttyUSB0` device.
On Linux, you can enable this by adding your user to the `dialout` group, and
rebooting or logging out and in again. (Note: on some distributions this may
be the `uucp` group, run `ls -la /dev/ttyUSB0` to check.)
@ -242,8 +114,23 @@ To flash the MicroPython firmware to your ESP32 use:
$ make deploy
```
This will use the `esptool.py` script (provided by ESP-IDF) to flash the
binary images to the device.
The default ESP32 board build by the above commands is the `GENERIC` one, which
should work on most ESP32 modules. You can specify a different board by passing
`BOARD=<board>` to the make commands, for example:
```bash
$ make BOARD=GENERIC_SPIRAM
```
Note: the above "make" commands are thin wrappers for the underlying `idf.py`
build tool that is part of the ESP-IDF. You can instead use `idf.py` directly,
for example:
```bash
$ idf.py build
$ idf.py -D MICROPY_BOARD=GENERIC_SPIRAM build
$ idf.py flash
```
Getting a Python prompt on the device
-------------------------------------
@ -262,6 +149,8 @@ or
$ miniterm.py /dev/ttyUSB0 115200
```
You can also use `idf.py monitor`.
Configuring the WiFi and using the board
----------------------------------------
@ -301,9 +190,27 @@ import machine
antenna = machine.Pin(16, machine.Pin.OUT, value=0)
```
Defining a custom ESP32 board
-----------------------------
The default ESP-IDF configuration settings are provided by the `GENERIC`
board definition in the directory `boards/GENERIC`. For a custom configuration
you can define your own board directory. Start a new board configuration by
copying an existing one (like `GENERIC`) and modifying it to suit your board.
MicroPython specific configuration values are defined in the board-specific
`mpconfigboard.h` file, which is included by `mpconfigport.h`. Additional
settings are put in `mpconfigboard.cmake`, including a list of `sdkconfig`
files that configure ESP-IDF settings. Some standard `sdkconfig` files are
provided in the `boards/` directory, like `boards/sdkconfig.ble`. You can
also define custom ones in your board directory.
See existing board definitions for further examples of configuration.
Configuration
Troubleshooting
---------------
* Continuous reboots after programming: Ensure FLASH_MODE is correct for your
board (e.g. ESP-WROOM-32 should be DIO). Then perform a `make clean`, rebuild,
redeploy.
* Continuous reboots after programming: Ensure `CONFIG_ESPTOOLPY_FLASHMODE` is
correct for your board (e.g. ESP-WROOM-32 should be DIO). Then perform a
`make clean`, rebuild, redeploy.