Merge pull request #4317 from weblate/weblate-circuitpython-main

Translations update from Weblate

locale/ID.po

@@ -1751,6 +1751,14 @@ msgstr ""
 "Frekuensi PWM tidak dapat ditulis ketika variabel_frequency Salah pada "
 "konstruksi."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1788,6 +1796,10 @@ msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)"
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "Pin harus mendukung interupsi perangkat keras"

locale/cs.po

@@ -1725,6 +1725,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1762,6 +1770,10 @@ msgstr ""
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""

locale/de_DE.po

@@ -1755,6 +1755,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1792,6 +1800,10 @@ msgstr "Pin hat keine ADC Funktionalität"
 msgid "Pin is input only"
 msgstr "Pin kann nur als Eingang verwendet werden"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "Pin muss Hardware-Interrupts unterstützen"

locale/el.po

@@ -1722,6 +1722,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1759,6 +1767,10 @@ msgstr ""
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""

locale/es.po

@@ -1769,6 +1769,14 @@ msgstr ""
 "La frecuencia de PWM no se puede escribir variable_frequency es False en la "
 "construcción."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1806,6 +1814,10 @@ msgstr "Pin no tiene capacidad ADC"
 msgid "Pin is input only"
 msgstr "El pin es solo de entrada"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "El pin debe admitir interrupciones de hardware"

locale/fil.po

@@ -1741,6 +1741,14 @@ msgid ""
 msgstr ""
 "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1778,6 +1786,10 @@ msgstr "Ang pin ay walang kakayahan sa ADC"
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""

locale/fr.po

@@ -1777,6 +1777,14 @@ msgstr ""
 "La fréquence de PWM n'est pas modifiable quand variable_frequency est False "
 "à la construction."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1814,6 +1822,10 @@ msgstr "La broche 'pin' ne supporte pas les capacitées ADC"
 msgid "Pin is input only"
 msgstr "La broche est entrée uniquement"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "La broche doit supporter les interruptions matérielles"

locale/hi.po

@@ -1722,6 +1722,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1759,6 +1767,10 @@ msgstr ""
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""

locale/it_IT.po

@@ -1759,6 +1759,14 @@ msgstr ""
 "frequenza PWM frequency non è scrivibile quando variable_frequency è "
 "impostato nel costruttore a False."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1796,6 +1804,10 @@ msgstr "Il pin non ha capacità di ADC"
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""

locale/ja.po

@@ -1738,6 +1738,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1775,6 +1783,10 @@ msgstr "ピンにADCの能力がありません"
 msgid "Pin is input only"
 msgstr "ピンは入力専用"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "ピンはハードウェア割り込みに対応していなければなりません"

locale/ko.po

@@ -1725,6 +1725,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1762,6 +1770,10 @@ msgstr ""
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""

locale/nl.po

@@ -1745,6 +1745,14 @@ msgstr ""
 "PWM frequentie is niet schrijfbaar wanneer de variable_frequency False is "
 "tijdens constructie."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1782,6 +1790,10 @@ msgstr "Pin heeft geen ADC mogelijkheden"
 msgid "Pin is input only"
 msgstr "Pin kan alleen voor invoer gebruikt worden"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "Pin moet hardware interrupts ondersteunen"

locale/pl.po

@@ -1736,6 +1736,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1773,6 +1781,10 @@ msgstr "Nóżka nie obsługuje ADC"
 msgid "Pin is input only"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "Pin musi obsługiwać przerwania sprzętowe"

locale/pt_BR.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-03 01:01+0000\n"
+"PO-Revision-Date: 2021-03-03 17:42+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n > 1;\n"
-"X-Generator: Weblate 4.5\n"
+"X-Generator: Weblate 4.5.1-dev\n"
 
 #: main.c
 msgid ""
@@ -1771,6 +1771,14 @@ msgstr ""
 "A frequência do PWM não pode ser gravada quando variable_frequency for False "
 "na construção."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr "A fatia do PWM já está em uso"
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr "O canal A da fatia do PWM já está em uso"
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1808,6 +1816,10 @@ msgstr "O pino não tem recursos de ADC"
 msgid "Pin is input only"
 msgstr "Apenas o pino de entrada"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr "O pino deve estar no canal B do PWM"
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "O pino deve ser compatível com as interrupções do hardware"

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-03-02 22:11+0000\n"
+"PO-Revision-Date: 2021-03-03 21:28+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.5\n"
+"X-Generator: Weblate 4.5.1-dev\n"
 
 #: main.c
 msgid ""
@@ -1104,7 +1104,7 @@ msgstr "IV måste vara %d byte lång"
 
 #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 msgid "In-buffer elements must be <= 4 bytes long"
-msgstr ""
+msgstr "Antal element i buffert måste vara <= 4 byte"
 
 #: py/persistentcode.c
 msgid ""
@@ -1724,7 +1724,7 @@ msgstr "Slut på sockets"
 
 #: ports/raspberrypi/bindings/rp2pio/StateMachine.c
 msgid "Out-buffer elements must be <= 4 bytes long"
-msgstr ""
+msgstr "Element i utbuffer måste vara <= 4 byte långa"
 
 #: shared-bindings/bitops/__init__.c
 #, c-format
@@ -1751,6 +1751,14 @@ msgstr ""
 "PWM-frekvensen är inte skrivbar när variable_frequency är falsk vid "
 "skapandet."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr "PWM-segment används redan"
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr "PWM-segmentkanal A används redan"
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1788,6 +1796,10 @@ msgstr "Pinnen har inte ADC-funktionalitet"
 msgid "Pin is input only"
 msgstr "Pinnen är enbart ingång"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr "Pinne måste vara på PWM-kanal B"
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "Pinnen måste stödja hårdvaruavbrott"

locale/zh_Latn_pinyin.po

@@ -1752,6 +1752,14 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě."
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice already in use"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "PWM slice channel A already in use"
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1789,6 +1797,10 @@ msgstr "Pin méiyǒu ADC nénglì"
 msgid "Pin is input only"
 msgstr "Yǐn jiǎo jǐn shūrù"
 
+#: ports/raspberrypi/common-hal/countio/Counter.c
+msgid "Pin must be on PWM Channel B"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr "Yǐn jiǎo bìxū zhīchí yìngjiàn zhōngduàn"